Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.7-801-gdd95069/
Failed boards:
arndale arm-multi_v7_nosmp_defconfig : FAILED 2:35.06 beaver arm-tegra_defconfig : FAILED 1:44.31 beaver arm-multi_v7_defconfig : FAILED 1:47.88 beaver arm-multi_v7_nosmp_defconfig : FAILED 1:50.79 colombus arm-sunxi_defconfig : FAILED 0:01.17 colombus arm-multi_lpae_defconfig : FAILED 0:00.44 colombus arm-multi_v7_nosmp_defconfig : FAILED 0:01.03 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:05.49 omap5uevm arm-multi_v7_defconfig : FAILED 0:47.75 omap5uevm arm-multi_lpae_defconfig : FAILED 2:14.18 omap5uevm arm-multi_v7_nosmp_defconfig : FAILED 1:07.90 pi arm-exynos_defconfig : FAILED 1:51.88 pi arm-multi_v7_defconfig : FAILED 1:55.95 pi arm-multi_lpae_defconfig : FAILED 2:09.68 rk3288evb arm-multi_lpae_defconfig : FAILED 0:00.53 snowball arm-u8500_defconfig : FAILED 0:00.71 snowball arm-multi_v7_defconfig : FAILED 3:29.79 snowball arm-multi_v7_nosmp_defconfig : FAILED 0:04.93 wandboard arm-imx_v6_v7_defconfig : FAILED 2:59.29
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:25.47 arndale arm-multi_lpae_defconfig : passed 1:22.16 bbb arm-omap2plus_defconfig : passed 1:45.04 bbb arm-multi_v7_nosmp_defconfig : passed 1:56.45 beagleboard-x15 arm-omap2plus_defconfig : warnings 0:56.50 beagleboard-x15 arm-multi_v7_defconfig : warnings 0:53.28 beagleboard-x15 arm-multi_lpae_defconfig : warnings 0:55.96 beagleboard-x15 arm-multi_v7_nosmp_defconfig : warnings 0:56.86 capri arm-bcm_defconfig : passed 0:54.08 capri arm-multi_v7_defconfig : passed 0:52.23 capri arm-multi_v7_nosmp_defconfig : warnings 0:45.41 chitra powerpc-pasemi_defconfig : passed 2:10.71 chitra powerpc-ppc64_defconfig : passed 2:02.70 colombus arm-multi_v7_defconfig : passed 2:45.99 cosmic arm-imx_v6_v7_defconfig : passed 3:24.49 cubie arm-sunxi_defconfig : passed 0:53.20 cubie arm-multi_v7_defconfig : passed 0:56.29 cubie arm-multi_v7_nosmp_defconfig : passed 0:51.57 cubie2 arm-sunxi_defconfig : passed 0:49.96 cubie2 arm-multi_v7_defconfig : passed 0:54.81 cubie2 arm-multi_lpae_defconfig : passed 0:55.70 cubie2 arm-multi_v7_nosmp_defconfig : warnings 0:56.77 cubox arm-multi_v7_defconfig : passed 1:09.50 cubox arm-mvebu_v7_defconfig : passed 1:00.02 cubox arm-multi_v7_nosmp_defconfig : passed 1:06.10 dalmore arm-tegra_defconfig : passed 1:28.85 dalmore arm-multi_v7_defconfig : passed 1:29.88 dalmore arm-multi_lpae_defconfig : passed 1:32.75 dalmore arm-multi_v7_nosmp_defconfig : warnings 1:25.79 jetsontk1 arm-tegra_defconfig : passed 0:50.91 jetsontk1 arm-multi_v7_defconfig : passed 0:47.72 jetsontk1 arm-multi_lpae_defconfig : passed 0:58.94 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 0:47.20 omap5uevm arm-omap2plus_defconfig : passed 1:12.75 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:43.62 parallella arm-multi_v7_defconfig : passed 2:58.69 parallella arm-multi_v7_nosmp_defconfig : warnings 2:45.22 pi arm-multi_v7_nosmp_defconfig : warnings 2:06.74 pit arm-multi_v7_defconfig : passed 2:14.77 pit arm-multi_v7_nosmp_defconfig : warnings 2:26.75 seattle arm64-defconfig : passed 2:34.42 snow arm-exynos_defconfig : passed 2:08.80 trimslice arm-tegra_defconfig : passed 3:00.87 trimslice arm-multi_v7_defconfig : passed 1:51.34 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:33.28 wandboard arm-multi_v7_defconfig : passed 1:25.78 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:06.67
Offline boards:
arndale arm-exynos_defconfig : OFFLINE 0:56.86 arndale arm-multi_v7_defconfig : OFFLINE 1:05.03 bbb arm-multi_v7_defconfig : OFFLINE 1:31.85 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:14.37 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:23.65 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 1:27.23 cosmic arm-multi_v7_defconfig : OFFLINE 0:35.73 cosmic arm-multi_v7_nosmp_defconfig : OFFLINE 0:33.71 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:40.37 hummingboard arm-multi_v7_defconfig : OFFLINE 2:12.35 hummingboard arm-multi_v7_nosmp_defconfig : OFFLINE 2:12.23 pandaes arm-omap2plus_defconfig : OFFLINE 0:54.35 pandaes arm-multi_v7_defconfig : OFFLINE 0:48.06 pit arm-exynos_defconfig : OFFLINE 0:24.06 pit arm-multi_lpae_defconfig : OFFLINE 0:26.50 rk3288evb arm-multi_v7_defconfig : OFFLINE 1:01.24 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:51.07 sama5 arm-sama5_defconfig : OFFLINE 2:15.57 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:22.18 seaboard arm-tegra_defconfig : OFFLINE 2:17.36 seaboard arm-multi_v7_defconfig : OFFLINE 2:23.24 seaboard arm-multi_v7_nosmp_defconfig : OFFLINE 2:12.38 snow arm-multi_v7_defconfig : OFFLINE 0:35.32 snow arm-multi_lpae_defconfig : OFFLINE 0:36.50 snow arm-multi_v7_nosmp_defconfig : OFFLINE 0:32.46 socfpga arm-socfpga_defconfig : OFFLINE 2:30.94 socfpga arm-multi_v7_defconfig : OFFLINE 2:22.31 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:11.98
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 2.043603] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.049029] hctosys: unable to open rtc device (rtc0) [ 2.057589] MAIN_DC: disabling [ 2.059161] hdmi-en: disabling [ 2.062639] ahci 122f0000.sata: couldn't get PHY in node sata: -517 [ 0.000000] Booting Linux on physical CPU 0x0 [ 2.072788] [c12c3150] *pgd=4120041e(bad) [ 0.000000] Linux version 4.7.0-00801-gdd95069 (build@brutus) (gcc version 6.1.0 (GCC) ) #1 Sun Jul 24 21:26:25 PDT 2016 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c53c7d [ 2.094575] Modules linked in: [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Insignal Arndale evaluation board based on EXYNOS5250 [ 0.000000] cma: Reserved 64 MiB at 0xbc000000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Samsung CPU ID: 0x43520010 [ 0.000000] On node 0 totalpages: 520192 [ 0.000000] free_area_init_node: node 0, pgdat c130ce44, node_mem_map eeff8000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 192512 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327680 pages, LIFO batch:31 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at /work/build/batch/arch/arm/kernel/devtree.c:149 arm_dt_init_cpu_maps+0xe4/0x148 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.7.0-00801-gdd95069 #1 [ 0.000000] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 0.000000] [<c030e87c>] (unwind_backtrace) from [<c030b41c>] (show_stack+0x10/0x14) [ 0.000000] [<c030b41c>] (show_stack) from [<c03386dc>] (__warn+0xe4/0xfc) [ 0.000000] [<c03386dc>] (__warn) from [<c033872c>] (warn_slowpath_fmt+0x38/0x48) [ 0.000000] [<c033872c>] (warn_slowpath_fmt) from [<c1104e80>] (arm_dt_init_cpu_maps+0xe4/0x148) [ 0.000000] [<c1104e80>] (arm_dt_init_cpu_maps) from [<c1104108>] (setup_arch+0x780/0x944)
[PYBOOT] [arndale 02:32]: Timed out waiting for "<type 'str'>":
[PYBOOT] [arndale 02:33]: got exception: timeout ~$off
[PYBOOT] [arndale 02:34]: Done.
========================================================================
Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.223076] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.230035] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.236554] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.243502] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.249085] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.256088] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.266086] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.277650] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.284271] [drm] No driver support for vblank timestamp query. [ 3.290213] drm drm: No connectors reported connected with modes [ 3.296228] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.321008] Console: switching to colour frame buffer device 128x48 [ 3.333144] drm drm: fb0: frame buffer device [ 3.348364] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.359183] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.365650] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.371060] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.378903] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.393377] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.400135] hub 1-0:1.0: USB hub found [ 3.403907] hub 1-0:1.0: 1 port detected [ 3.408835] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.414246] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.421983] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.433369] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.440031] hub 2-0:1.0: USB hub found [ 3.443799] hub 2-0:1.0: 1 port detected [ 3.452634] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.466276] vdd_sata,avdd_plle: disabling [ 3.470995] usb1_vbus: disabling [ 3.475091] Waiting for root device /dev/mmcblk0p1... [ 3.753376] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.691971] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:44]: got exception: timeout ~$off
[PYBOOT] [beaver 01:46]: Done.
========================================================================
Board beaver-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 3.202729] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.209682] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.216198] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.223132] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.228715] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.235327] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.245318] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.255843] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.262457] [drm] No driver support for vblank timestamp query. [ 3.268386] drm drm: No connectors reported connected with modes [ 3.274394] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.293719] Console: switching to colour frame buffer device 128x48 [ 3.305497] drm drm: fb0: frame buffer device [ 3.309934] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.320204] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.326660] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.332072] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.339788] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.353111] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.359440] hub 1-0:1.0: USB hub found [ 3.363203] hub 1-0:1.0: 1 port detected [ 3.367929] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.373342] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.380996] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.393108] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.399373] hub 2-0:1.0: USB hub found [ 3.403130] hub 2-0:1.0: 1 port detected [ 3.410601] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.423566] vdd_sata,avdd_plle: disabling [ 3.427952] usb1_vbus: disabling [ 3.431922] Waiting for root device /dev/mmcblk0p1... [ 3.713111] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.651679] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:48]: got exception: timeout ~$off
[PYBOOT] [beaver 01:50]: Done.
========================================================================
Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------
[ 6.364176] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 6.371219] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.376819] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 6.384329] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 6.394331] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 6.406896] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.413535] [drm] No driver support for vblank timestamp query. [ 6.419540] drm drm: No connectors reported connected with modes [ 6.425567] [drm] Cannot find any crtc or sizes - going 1024x768 [ 6.451142] Console: switching to colour frame buffer device 128x48 [ 6.462941] drm drm: fb0: frame buffer device [ 6.490764] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 6.500043] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 6.506517] tegra-ehci 7d004000.usb: EHCI Host Controller [ 6.511949] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 6.519912] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 6.540763] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 6.548359] hub 1-0:1.0: USB hub found [ 6.552153] hub 1-0:1.0: 1 port detected [ 6.556937] tegra-ehci 7d008000.usb: EHCI Host Controller [ 6.562379] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 6.570255] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 6.590757] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 6.598238] hub 2-0:1.0: USB hub found [ 6.602022] hub 2-0:1.0: 1 port detected [ 6.610198] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 6.628367] vdd_sata,avdd_plle: disabling [ 6.632872] usb1_vbus: disabling [ 6.636282] ALSA device list: [ 6.639238] #0: NVIDIA Tegra Beaver [ 6.643488] Waiting for root device /dev/mmcblk0p1... [ 6.920762] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 7.906144] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:42]: got exception: timeout ~$off
[PYBOOT] [beaver 01:43]: Done.
========================================================================
Board colombus-arm-multi_lpae_defconfig failure log: -------------------------------------------------
========================================================================
Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
========================================================================
Board colombus-arm-sunxi_defconfig failure log: -------------------------------------------------
========================================================================
Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
dhcp Unknown command 'dhcp' - try 'help' Exynos4412 # setenv serverip 172.16.20.2 setenv serverip 172.16.20.2 Exynos4412 # tftp 0x40008000 tmp/odroidu3-MeBW73/zImagevTkisg tftp 0x40008000 tmp/odroidu3-MeBW73/zImagevTkisg Waiting for Ethernet connection... done. Using sms0 device TFTP from server 172.16.20.2; our IP address is 172.16.20.201 Filename 'tmp/odroidu3-MeBW73/zImagevTkisg'. Load address: 0x40008000 Loading: *EHCI timed out on TD - token=0x8008d80 T EHCI timed out on TD - token=0x8008d80 T EHCI timed out on TD - token=0x8008d80 T EHCI timed out on TD - token=0x8008d80 T ################################################################# ################################################################# ################################################################# ################################################## 128.9 KiB/s done Bytes transferred = 3592192 (36d000 hex) Exynos4412 # bootz 0x40008000 ; bootm 0x40008000
[PYBOOT] [odroidu3 00:27]: u-boot: jumping to kernel image bootz 0x40008000 ; bootm 0x40008000 Unknown command 'bootz' - try 'help' Boot with zImage
Starting kernel ...
[PYBOOT] [odroidu3 00:27]: u-boot: started kernel.
[PYBOOT] [odroidu3 01:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:03]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:04]: Done.
========================================================================
Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.775683] Registering SWP/SWPB emulation handler [ 1.785346] palmas 0-0048: Irq flag is 0x00000000 [ 1.811761] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.822422] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.833830] mmc0: new high speed MMC card at address 0001 [ 1.839858] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.844775] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.851119] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.860199] SMPS6: supplied by vsys_cobra [ 1.864712] smps6: Bringing 1350000uV into 1200000-1200000uV [ 1.872326] SMPS7: supplied by vsys_cobra [ 1.877268] vdds_1v8_main: supplied by smps7 [ 1.882625] SMPS8: supplied by vsys_cobra [ 1.888332] SMPS9: supplied by vsys_cobra [ 1.892839] smps9: Bringing 0uV into 2100000-2100000uV [ 1.900837] LDO1: supplied by vsys_cobra [ 1.905255] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.911633] LDO2: supplied by vsys_cobra [ 1.916046] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.922409] LDO3: supplied by vdds_1v8_main [ 1.928437] LDO4: supplied by vdds_1v8_main [ 1.933137] ldo4: Bringing 0uV into 1800000-1800000uV [ 1.939533] LDO5: supplied by vsys_cobra [ 1.945277] LDO6: supplied by vdds_1v8_main [ 1.952768] LDO7: supplied by vsys_cobra [ 1.957190] ldo7: Bringing 0uV into 2000000-2000000uV [ 1.963575] LDO8: supplied by vsys_cobra [ 1.969314] LDO9: supplied by vmmcsd_fixed [ 1.975362] LDOLN: supplied by vsys_cobra [ 1.981196] LDOUSB: supplied by vsys_cobra [ 1.990061] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.014867] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.022633] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.030539] cpufreq: cpufreq_online: [PYBOOT] [omap5uevm 02:11]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:12]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:13]: Done.
========================================================================
Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.420294] Flags: NzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 2.427815] Control: 10c5387d Table: 8020406a DAC: 00000051 [ 2.433799] Process swapper/0 (pid: 0, stack limit = 0xc1300220) [ 2.440048] Stack: (0xc1301eb8 to 0xc1302000) [ 2.444583] 1ea0: 77359400 c1302510 [ 2.453107] 1ec0: 00000000 c0ef517c 00000000 ee1860c0 ee186120 00000000 00000001 ee008000 [ 2.461630] 1ee0: fa213000 c140e2c8 c1302510 c0385d84 ee1860c0 c130a968 00000000 c0388fb8 [ 2.470150] 1f00: c12134dc 00000000 00000000 c03852e4 c12134dc c0385594 c1302870 c1340578 [ 2.478653] 1f20: fa21200c c1301f50 fa212000 c03017a8 c0308780 a0000013 ffffffff c1301f84 [ 2.487170] 1f40: c1214580 c1302508 c140e2c8 c030c514 00000001 00000000 ea000013 f0880000 [ 2.495686] 1f60: c1300000 c13024a4 00000000 00000000 c1214580 c1302508 c140e2c8 c1302510 [ 2.504200] 1f80: 60000013 c1301fa0 c032b014 c0308780 a0000013 ffffffff 00000051 c030877c [ 2.512713] 1fa0: c1300000 c0379278 c1301fb4 c1301fa8 00000000 ffffffff 00000000 c1100c50 [ 2.521234] 1fc0: ffffffff ffffffff 00000000 c1100684 00000000 c11a6a30 c14105d4 c1302480 [ 2.529749] 1fe0: c11a6a2c c1307614 8020406a 412fc0f2 00000000 8020807c 00000000 00000000 [ 2.538281] [<c0997424>] (omap_i2c_isr) from [<c0385c90>] (handle_irq_event_percpu+0x9c/0x14c) [ 2.547256] [<c0385c90>] (handle_irq_event_percpu) from [<c0385d84>] (handle_irq_event+0x44/0x68) [ 2.556509] [<c0385d84>] (handle_irq_event) from [<c0388fb8>] (handle_fasteoi_irq+0xb4/0x194) [ 2.565391] [<c0388fb8>] (handle_fasteoi_irq) from [<c03852e4>] (generic_handle_irq+0x24/0x34) [ 2.574364] [<c03852e4>] (generic_handle_irq) from [<c0385594>] (__handle_domain_irq+0x5c/0xb4) [ 2.583425] [<c0385594>] (__handle_domain_irq) from [<c03017a8>] (gic_handle_irq+0x54/0x98) [ 2.592130] [<c03017a8>] (gic_handle_irq) from [<c030c514>] (__irq_svc+0x54/0x70) [ 2.599918] Exception stack(0xc1301f50 to 0xc1301f98) [ 2.605184] 1f40: 00000001 00000000 ea000013 f0880000 [ 2.613699] 1f60: c1300000 c13024a4 00000000 00000000 c1214580 c1302508 c140e2c8 c1302510 [ 2.622215] 1f80: 60000013 c1301fa0 c032b014 c0308780 a0000013 ffffffff [ 2.629117] [<c030c514>] (__irq_svc) from [<c0308780>] (arch_cpu_idle+0x20/0x3c) [ 2.636819] [<c0308780>] (arch_cpu_idle) from [<c0379278>] (cpu_startup_entry+0x1bc/0x218) [ 2.645430] [<c0379278>] (cpu_startup_entry) from [<c1100c50>] (start_kernel+0x374/0x380) [ 2.653951] [<c1100c50>] (start_kernel) from [<8020807c>] (0x8020807c) [ 2.660756] Code: e1d220b0 e5d00001 e6ff2072 e0833110 (e1d330b0) [ 2.667108] ---[ end trace 0258befeb19e2a85 ]--- [ 2.671913] Kernel panic - not syncing: Fatal exception in interrupt [ 3.655478] SMP: failed to stop secondary CPUs [ 3.660110] ---[ end Kernel panic - not syncing: Fatal exception in interrupt
[PYBOOT] [omap5uevm 00:45]: got exception: panic ~$off
[PYBOOT] [omap5uevm 00:47]: Done.
========================================================================
Board omap5uevm-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[ 2.128507] 1e00: 00000008 c0741554 00000000 c12b1188 c12b1194 c12a4678 c0f7ba58 c11fa36c [ 2.137079] 1e20: 00000008 c07415dc 00000000 c0f2a338 ee071e50 00000000 c12b1144 ee071e50 [ 2.145656] 1e40: c134d118 c06b2740 00000000 c0f2a338 c0f7ba58 c0744798 c134f59c ffffe000 [ 2.154223] 1e60: 00000000 c119e770 00000000 c113a7f4 00000100 00000200 ee5ba400 00000001 [ 2.162792] 1e80: ee5ba434 ee5ba410 ee071ebc c03497b4 c12a6d88 ee5ba42c c130eab1 c0ee9020 [ 2.171362] 1ea0: c12355c4 00000000 ee071ec0 ee071ec0 ee071eb0 ee071eb0 00000000 00000000 [ 2.179919] 1ec0: ee071ec0 ee071ec0 c1192834 00000000 c134d37c 00000114 c1192834 00000000 [ 2.188485] 1ee0: c11fa364 c113a798 ffffe000 00000114 c1192834 00000000 c11fa36c 00000008 [ 2.197054] 1f00: 00000000 c0301d4c c12386b4 00000000 00000000 c04337b8 c0c0a100 ee043680 [ 2.205622] 1f20: c102cd4c c0c1c000 00000114 c034f9e8 c0ed4d70 c102b7bc 00000000 00000007 [ 2.214198] 1f40: 00000007 c0ee8fe4 00000000 c1310000 c1310000 00000114 c1310000 c1310000 [ 2.222774] 1f60: 00000114 c1192834 c1192838 c1100d80 00000007 00000007 00000000 c11005ac [ 2.231347] 1f80: 00000000 00000000 c0b26c74 00000000 00000000 00000000 00000000 00000000 [ 2.239917] 1fa0: 00000000 c0b26c7c 00000000 c0307b18 00000000 00000000 00000000 00000000 [ 2.248487] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.257057] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 08b8c1e0 2d9940a1 [ 2.265626] [<c03dcb18>] (kmem_cache_alloc) from [<c043ae60>] (__kernfs_new_node+0x44/0xb8) [ 2.274377] [<c043ae60>] (__kernfs_new_node) from [<c043bdd0>] (kernfs_new_node+0x1c/0x38) [ 2.283047] [<c043bdd0>] (kernfs_new_node) from [<c043d764>] (kernfs_create_link+0x18/0x6c) [ 2.291809] [<c043d764>] (kernfs_create_link) from [<c043e370>] (sysfs_do_create_link_sd+0x48/0x94) [ 2.301303] [<c043e370>] (sysfs_do_create_link_sd) from [<c07410c8>] (device_add+0x278/0x568) [ 2.310245] [<c07410c8>] (device_add) from [<c0741554>] (device_create_groups_vargs+0xac/0xbc) [ 2.319272] [<c0741554>] (device_create_groups_vargs) from [<c07415dc>] (device_create_with_groups+0x24/0x2c) [ 2.329666] [<c07415dc>] (device_create_with_groups) from [<c06b2740>] (misc_register+0x150/0x198) [ 2.339060] [<c06b2740>] (misc_register) from [<c113a7f4>] (ubi_init+0x5c/0x268) [ 2.346809] [<c113a7f4>] (ubi_init) from [<c0301d4c>] (do_one_initcall+0x44/0x16c) [ 2.354745] [<c0301d4c>] (do_one_initcall) from [<c1100d80>] (kernel_init_freeable+0x134/0x1c4) [ 2.363858] [<c1100d80>] (kernel_init_freeable) from [<c0b26c7c>] (kernel_init+0x8/0x110) [ 2.372432] [<c0b26c7c>] (kernel_init) from [<c0307b18>] (ret_from_fork+0x14/0x3c) [ 2.380367] Code: e5930000 e3500000 0a000016 e5943014 (e7905003) [ 2.386765] ---[ end trace cb88537fdc8fa202 ]--- [ 2.391615] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.391615] [ 2.401184] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.401184]
[PYBOOT] [omap5uevm 01:05]: got exception: panic ~$off
[PYBOOT] [omap5uevm 01:07]: Done.
========================================================================
Board pi-arm-exynos_defconfig failure log: -------------------------------------------------
[ 21.250689] BUG: spinlock lockup suspected on CPU#0, kworker/u16:1/80 [ 21.255642] lock: 0xee73f000, .magic: dead4ead, .owner: kworker/u16:1/80, .owner_cpu: 0 [ 21.263708] CPU: 0 PID: 80 Comm: kworker/u16:1 Tainted: G D 4.7.0-00801-gdd95069 #1 [ 21.272468] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 21.278551] [<c010dfec>] (unwind_backtrace) from [<c010ad18>] (show_stack+0x10/0x14) [ 21.286266] [<c010ad18>] (show_stack) from [<c0326d98>] (dump_stack+0x78/0x8c) [ 21.293467] [<c0326d98>] (dump_stack) from [<c01599b4>] (do_raw_spin_lock+0xfc/0x1d8) [ 21.301273] [<c01599b4>] (do_raw_spin_lock) from [<c06d4080>] (__schedule+0x84/0x4b8) [ 21.309079] [<c06d4080>] (__schedule) from [<c06d4500>] (schedule+0x4c/0xac) [ 21.316106] [<c06d4500>] (schedule) from [<c011e500>] (do_exit+0x870/0xa34) [ 21.323047] [<c011e500>] (do_exit) from [<c010af54>] (die+0x238/0x2f4) [ 21.329556] [<c010af54>] (die) from [<c0114e84>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 21.337449] [<c0114e84>] (__do_kernel_fault.part.0) from [<c0110894>] (do_bad_area+0x0/0x8c) [ 21.345863] [<c0110894>] (do_bad_area) from [<c01105fc>] (do_page_fault+0x0/0x298) [ 21.353409] [<c01105fc>] (do_page_fault) from [<00000000>] ( (null)) [ 21.359827] Sending NMI to all CPUs: [ 21.363383] NMI backtrace for cpu 0 [ 21.366854] CPU: 0 PID: 80 Comm: kworker/u16:1 Tainted: G D 4.7.0-00801-gdd95069 #1 [ 21.375614] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 21.381695] [<c010dfec>] (unwind_backtrace) from [<c010ad18>] (show_stack+0x10/0x14) [ 21.389410] [<c010ad18>] (show_stack) from [<c0326d98>] (dump_stack+0x78/0x8c) [ 21.396612] [<c0326d98>] (dump_stack) from [<c032a6f8>] (nmi_cpu_backtrace+0x78/0x7c) [ 21.404418] [<c032a6f8>] (nmi_cpu_backtrace) from [<c010c934>] (raise_nmi+0x60/0x64) [ 21.412138] [<c010c934>] (raise_nmi) from [<c032a678>] (nmi_trigger_all_cpu_backtrace+0x128/0x130) [ 21.421074] [<c032a678>] (nmi_trigger_all_cpu_backtrace) from [<c01599bc>] (do_raw_spin_lock+0x104/0x1d8) [ 21.430616] [<c01599bc>] (do_raw_spin_lock) from [<c06d4080>] (__schedule+0x84/0x4b8) [ 21.438423] [<c06d4080>] (__schedule) from [<c06d4500>] (schedule+0x4c/0xac) [ 21.445450] [<c06d4500>] (schedule) from [<c011e500>] (do_exit+0x870/0xa34) [ 21.452391] [<c011e500>] (do_exit) from [<c010af54>] (die+0x238/0x2f4) [ 21.458897] [<c010af54>] (die) from [<c0114e84>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 21.466791] [<c0114e84>] (__do_kernel_fault.part.0) from [<c0110894>] (do_bad_area+0x0/0x8c) [ 21.475206] [<c0110894>] (do_bad_area) from [<c01105fc>] (do_page_fault+0x0/0x298) [ 21.482752] [<c01105fc>] (do_page_fault) from [<00000000>] ( (null))
[PYBOOT] [pi 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:48]: got exception: timeout ~$off
[PYBOOT] [pi 01:50]: Done.
========================================================================
Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.503492] isl29018 7-0044: No cache defaults, reading back from HW [ 1.509842] isl29018 7-0044: Failed to read 1: -6 [ 1.514428] isl29018 7-0044: regmap initialization fails: -6 [ 1.525498] NET: Registered protocol family 10 [ 1.529933] sit: IPv6 over IPv4 tunneling driver [ 1.533508] NET: Registered protocol family 17 [ 1.537517] can: controller area network core (rev 20120528 abi 9) [ 1.543706] NET: Registered protocol family 29 [ 1.548095] can: raw protocol (rev 20120528) [ 1.552344] can: broadcast manager protocol (rev 20120528 t) [ 1.557986] can: netlink gateway (rev 20130117) max_hops=1 [ 1.563713] Key type dns_resolver registered [ 1.568029] ThumbEE CPU extension supported. [ 1.571955] Registering SWP/SWPB emulation handler [ 1.581826] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.587308] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.593674] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.599049] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.609145] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.619448] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.624897] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.635081] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.641264] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.646642] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.656371] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.678621] Waiting for root device /dev/mmcblk0p1... [ 1.682502] mmc0: tuning execution failed: -5 [ 1.686561] mmc0: error -5 whilst initialising MMC card [ 2.548275] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.562374] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.567833] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.574205] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.579589] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 02:06]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 02:07]: got exception: timeout ~$off
[PYBOOT] [pi 02:08]: Done.
========================================================================
Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.503509] isl29018 7-0044: No cache defaults, reading back from HW [ 1.509859] isl29018 7-0044: Failed to read 1: -6 [ 1.514444] isl29018 7-0044: regmap initialization fails: -6 [ 1.525509] NET: Registered protocol family 10 [ 1.529935] sit: IPv6 over IPv4 tunneling driver [ 1.533504] NET: Registered protocol family 17 [ 1.537516] can: controller area network core (rev 20120528 abi 9) [ 1.543705] NET: Registered protocol family 29 [ 1.548093] can: raw protocol (rev 20120528) [ 1.552343] can: broadcast manager protocol (rev 20120528 t) [ 1.557986] can: netlink gateway (rev 20130117) max_hops=1 [ 1.563712] Key type dns_resolver registered [ 1.568030] ThumbEE CPU extension supported. [ 1.571954] Registering SWP/SWPB emulation handler [ 1.581821] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.587298] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.593664] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.599039] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.609138] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.619459] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.624905] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.635090] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.641272] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.646649] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.656378] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.678644] Waiting for root device /dev/mmcblk0p1... [ 1.682529] mmc0: tuning execution failed: -5 [ 1.686586] mmc0: error -5 whilst initialising MMC card [ 2.548280] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.562402] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.567869] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.574239] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.579623] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:54]: got exception: timeout ~$off
[PYBOOT] [pi 01:55]: Done.
========================================================================
Board rk3288evb-arm-multi_lpae_defconfig failure log: -------------------------------------------------
========================================================================
Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.059448] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.066467] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.073455] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.080444] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.084838] mmc3: new high speed MMC card at address 0001 [ 2.089782] mmcblk3: mmc3:0001 3.53 GiB [ 2.089996] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.090179] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.090332] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.095977] mmcblk3: p1 p2 p3 p4 [ 2.122497] db8500-esram12: disabling [ 2.126312] db8500-esram34: disabling [ 2.130279] V-CSI/DSI: disabling [ 2.133544] mmci-reg: disabling [ 2.137207] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.143157] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.151153] EXT4-fs (mmcblk3p4): couldn't mount as ext3 due to feature incompatibilities [ 2.160644] EXT4-fs (mmcblk3p4): couldn't mount as ext2 due to feature incompatibilities [ 2.269531] EXT4-fs (mmcblk3p4): warning: mounting fs with errors, running e2fsck is recommended [ 2.613708] EXT4-fs (mmcblk3p4): mounted filesystem with ordered data mode. Opts: (null) [ 2.621887] VFS: Mounted root (ext4 filesystem) on device 179:4. [ 2.637023] devtmpfs: mounted [ 2.644012] Freeing unused kernel memory: [PYBOOT] [snowball 00:54]: kernel: finished booting, starting userspace. 2048K (c1100000 - c1300000) INIT: version 2.88 booting [[36minfo[39;49m] Using makefile-style concurrent boot in runlevel S. Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 03:24]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 03:25]: got exception: timeout ~$off
[PYBOOT] [snowball 03:26]: Done.
========================================================================
Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
========================================================================
Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
========================================================================
Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 20.112250] mmcblk0: error -110 sending status command, retrying [ 20.120700] mmcblk0: error -110 sending status command, aborting [ 20.131725] mmcblk0: error -110 sending status command, retrying [ 20.140189] mmcblk0: error -110 sending status command, retrying [ 20.148646] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty"[ 20.165560] mmcblk0: error -110 sending status command, retrying
INIT: cannot execute "/sbin/[ 20.174306] mmcblk0: error -110 sending status command, retrying getty" INIT: cannot execute "/[ 20.183193] mmcblk0: error -110 sending status command, aborting sbin/getty" INIT: Id "5" respawning too fast: disabled for 5 m[ 20.194802] mmcblk0: error -110 sending status command, retrying inutes INIT: Id "S1" respawnin[ 20.203688] mmcblk0: error -110 sending status command, retrying g too fast: disabled for 5 minute[ 20.212585] mmcblk0: error -110 sending status command, aborting s [ 20.224022] mmcblk0: error -110 sending status command, retrying [ 20.232475] mmcblk0: error -110 sending status command, retrying [ 20.240928] mmcblk0: error -110 sending status command, aborting INIT: INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty"
INIT: cannot execute "/sbin[ 20.257816] mmcblk0: error -110 sending status command, retrying /getty" INIT: Id "6" respawnin[ 20.266610] mmcblk0: error -110 sending status command, retrying g too fast: disabled for 5 minute[ 20.275514] mmcblk0: error -110 sending status command, aborting s INIT: Id "4" respawning too fast: disabled for 5 minutes INIT: cannot execute "/sbin/getty" INIT: Id "2" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 45.994891] random: nonblocking pool is initialized
[PYBOOT] [wandboard 02:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 02:57]: got exception: timeout ~$off
[PYBOOT] [wandboard 02:58]: Done.
kernel-build-reports@lists.linaro.org
-
Olof's autobooter