queue boot: 6 passed 5 failed (queue/v3.10.12-1-gebe5c08) - Kernel-build-reports

16 Sep 2013


      arndale             :	passed	0:46.01
    beaver              :	passed	0:31.52
    cubie               :	FAILED	0:12.77
    cubie2              :	FAILED	0:41.40
    cubox               :	passed	0:48.26
    panda               :	passed	0:52.06
    sama5               :	passed	1:39.47
    snowball            :	passed	1:37.46
    multi-beaver        :	FAILED	0:41.11
    multi-panda         :	FAILED	0:47.00
    multi-snowball      :	FAILED	0:43.56
Last entries of failed logs below:
========================================================================
Board cubie failure log:
    -------------------------------------------------
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: Adding default-specified kcs state machine
ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: Could not set up I/O space
Trying to free nonexistent resource <0000000000000ca2-0000000000000ca2>
Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3>
ipmi_si: Adding default-specified smic state machine
ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
ipmi_si: Could not set up I/O space
Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9>
Trying to free nonexistent resource <0000000000000caa-0000000000000caa>
Trying to free nonexistent resource <0000000000000cab-0000000000000cab>
ipmi_si: Adding default-specified bt state machine
ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
ipmi_si: Could not set up I/O space
Trying to free nonexistent resource <00000000000000e4-00000000000000e4>
Trying to free nonexistent resource <00000000000000e5-00000000000000e5>
Trying to free nonexistent resource <00000000000000e6-00000000000000e6>
ipmi_si: Unable to find any System Interface(s)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 17) is a U6_16550A
console [ttyS0] enabled
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
Registering SWP/SWPB emulation handler
/home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
List of all partitions:
No filesystem could mount root, tried: 
Kernel panic - not syncing: VFS: Unable to~$off
========================================================================
Board cubie2 failure log:
    -------------------------------------------------
loglevel=8
netmask=255.255.255.0
panicarg=panic=10
partition=0:1
scriptaddr=0x44000000
serverip=172.16.1.4
setargs=if test -z \"$root\"; then if test \"$bootpath\" = "boot/"; then root="/dev/mmcblk0p1 rootwait"; else root="/dev/mmcblk0p2 rootwait"; fi; fi; setenv bootargs console=${console} root=${root} loglevel=${loglevel} ${panicarg} ${extraargs}
stderr=serial
stdin=serial
stdout=serial
Environment size: 2098/131068 bytes
sun7i#printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp
sun7i#tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.10.12-1-gebe5c08/uImage.multi-1g
tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.10.12-1-gebe5c08/uImage.multi-1g
Using emac device
TFTP from server 172.16.1.4; our IP address is 172.16.1.107
Filename '/srv/tftp/queue/v3.10.12-1-gebe5c08/uImage.multi-1g'.
Load address: 0x41000000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     ###############################
     1.7 MiB/s
done
Bytes transferred = 1820224 (1bc640 hex)
sun7i#tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.10.12-1-gebe5c08/sun7i-a20-cubieboard2.dtb
tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.10.12-1-gebe5c08/sun7i-a20-cubieboard2.dtb
Using emac device
TFTP from server 172.16.1.4; our IP address is 172.16.1.107
Filename '/srv/tftp/queue/v3.10.12-1-gebe5c08/sun7i-a20-cubieboard2.dtb'.
Load address: 0x42000000
Loading: *
TFTP error: 'File not found' (1)
Not retrying...
sun7i#~$off
========================================================================
Board multi-beaver failure log:
    -------------------------------------------------
Using asx0 device
TFTP from server 172.16.1.4; our IP address is 172.16.1.145
Filename '/srv/tftp/queue/v3.10.12-1-gebe5c08/uImage.multi-2g'.
Load address: 0x82000000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     ###############################
     1.9 MiB/s
done
Bytes transferred = 1820224 (1bc640 hex)
Tegra30 (Beaver) # tftpboot 0x83000000 172.16.1.4:/srv/tftp/queue/v3.10.12-1-gebe5c08/tegra30-beaver.dtb
tftpboot 0x83000000 172.16.1.4:/srv/tftp/queue/v3.10.12-1-gebe5c08/tegra30-beaver.dtb
Using asx0 device
TFTP from server 172.16.1.4; our IP address is 172.16.1.145
Filename '/srv/tftp/queue/v3.10.12-1-gebe5c08/tegra30-beaver.dtb'.
Load address: 0x83000000
Loading: *####
     1.3 MiB/s
done
Bytes transferred = 16546 (40a2 hex)
Tegra30 (Beaver) # bootm 0x82000000 - 0x83000000
bootm 0x82000000 - 0x83000000
## Booting kernel from Legacy Image at 82000000 ...
   Image Name:   
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1820160 Bytes = 1.7 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 83000000
   Booting using the fdt blob at 0x83000000
   Loading Kernel Image ... OK
   Loading Device Tree to 8fff8000, end 8ffff0a1 ... OK
Starting kernel ...
~$off
========================================================================
Board multi-panda failure log:
    -------------------------------------------------
TFTP from server 172.16.1.4; our IP address is 172.16.1.182
Filename '/srv/tftp/queue/v3.10.12-1-gebe5c08/uImage.multi-2g'.
Load address: 0x80000000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     ###############################
done
Bytes transferred = 1820224 (1bc640 hex)
Panda # tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.12-1-gebe5c08/omap4-panda-es.dtb
tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.12-1-gebe5c08/omap4-panda-es.dtb
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 172.16.1.4; our IP address is 172.16.1.182
Filename '/srv/tftp/queue/v3.10.12-1-gebe5c08/omap4-panda-es.dtb'.
Load address: 0x81000000
Loading: *####
done
Bytes transferred = 17271 (4377 hex)
Panda # bootm 0x80000000 - 0x81000000
bootm 0x80000000 - 0x81000000
## Booting kernel from Legacy Image at 80000000 ...
   Image Name:   
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1820160 Bytes = 1.7 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 81000000
   Booting using the fdt blob at 0x81000000
   Loading Kernel Image ... OK
OK
   reserving fdt memory region: addr=9d000000 size=3000000
   Using Device Tree in place at 81000000, end 81007376
Starting kernel ...
~$off
========================================================================
Board multi-snowball failure log:
    -------------------------------------------------
ipaddr=172.16.1.109
serverip=172.16.1.7
bootfile=queue/v3.10.12-1-gebe5c08/uImage.multi-snowball
autoboot=no
Environment size: 1705/4092 bytes
U8500 $ printenv bootargs
printenv bootargs
bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk
U8500 $ tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.10.12-1-gebe5c08/uImage.multi-snowball
tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.10.12-1-gebe5c08/uImage.multi-snowball
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 08:00:08:1e:0f:44
Using smc911x-0 device
TFTP from server 172.16.1.4; our IP address is 172.16.1.109
Filename '/srv/tftp/queue/v3.10.12-1-gebe5c08/uImage.multi-snowball'.
Load address: 0x100000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     ###############################
done
Bytes transferred = 1820224 (1bc640 hex)
U8500 $ bootm 0x100000
bootm 0x100000
## Booting kernel from Legacy Image at 00100000 ...
   Image Name:   
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1820160 Bytes =  1.7 MB
   Load Address: 00008000
   Entry Point:  00008000
   Loading Kernel Image ... OK
OK
Starting kernel ...
~$off