Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-642-g9a45f03/

Failed boards:

arndale multi_v7_nosmp_defconfig : NO BUILD bbb arm-omap2plus_defconfig : FAILED 1:54.24 bbb arm-multi_v7_defconfig : FAILED 2:11.33 bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:44.33 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:45.10 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:58.42 beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.35 cosmic arm-multi_v7_defconfig : FAILED 2:14.30 cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore arm-tegra_defconfig : FAILED 1:48.29 dalmore arm-multi_v7_defconfig : FAILED 2:19.64 dalmore arm-multi_lpae_defconfig : FAILED 1:53.83 dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 2:02.34 omap5uevm arm-multi_v7_defconfig : FAILED 2:07.25 omap5uevm arm-multi_lpae_defconfig : FAILED 2:26.46 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-multi_v7_defconfig : FAILED 2:09.62 pi arm-multi_lpae_defconfig : FAILED 1:50.01 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard arm-tegra_defconfig : FAILED 1:49.16 seaboard arm-multi_v7_defconfig : FAILED 1:54.95 seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball arm-u8500_defconfig : FAILED 1:56.54 snowball arm-multi_v7_defconfig : FAILED 2:07.14 snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard multi_v7_nosmp_defconfig : NO BUILD

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:30.60 arndale arm-exynos_defconfig : passed 1:36.29 arndale arm-multi_v7_defconfig : passed 1:33.27 arndale arm-multi_lpae_defconfig : passed 1:34.18 capri arm-bcm_defconfig : passed 1:07.68 capri arm-multi_v7_defconfig : passed 0:49.59 chitra powerpc-ppc64_defconfig : passed 3:07.19 colombus arm-sunxi_defconfig : passed 2:26.33 colombus arm-multi_v7_defconfig : passed 2:38.72 colombus arm-multi_lpae_defconfig : passed 2:33.15 cubie arm-sunxi_defconfig : passed 0:57.43 cubie arm-multi_v7_defconfig : passed 1:00.44 cubie2 arm-sunxi_defconfig : passed 0:48.46 cubie2 arm-multi_v7_defconfig : passed 1:12.99 cubie2 arm-multi_lpae_defconfig : passed 0:59.73 cubox arm-multi_v7_defconfig : passed 1:35.16 cubox arm-mvebu_v7_defconfig : passed 1:03.29 hummingboard arm-imx_v6_v7_defconfig : passed 1:45.71 hummingboard arm-multi_v7_defconfig : passed 1:19.41 jetsontk1 arm-tegra_defconfig : passed 1:38.04 jetsontk1 arm-multi_v7_defconfig : passed 1:50.95 jetsontk1 arm-multi_lpae_defconfig : passed 1:36.39 omap5uevm arm-omap2plus_defconfig : passed 1:10.05 pandaes arm-omap2plus_defconfig : warnings 1:35.61 pandaes arm-multi_v7_defconfig : passed 1:46.70 pi arm-exynos_defconfig : passed 2:12.83 pit arm-exynos_defconfig : passed 2:11.54 pit arm-multi_v7_defconfig : passed 2:19.33 pit arm-multi_lpae_defconfig : passed 2:15.74 seattle arm64-defconfig : warnings 2:22.36 snow arm-exynos_defconfig : passed 2:25.31 snow arm-multi_v7_defconfig : passed 1:59.43 snow arm-multi_lpae_defconfig : passed 1:58.41 trimslice arm-tegra_defconfig : passed 2:38.99 wandboard arm-imx_v6_v7_defconfig : passed 1:23.80 wandboard arm-multi_v7_defconfig : passed 1:23.27

Offline boards:

beaver arm-tegra_defconfig : OFFLINE 2:12.93 beaver arm-multi_v7_defconfig : OFFLINE 2:36.25 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 2:12.72 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 2:47.25 parallella arm-multi_v7_defconfig : OFFLINE 2:26.97 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:45.69 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:43.64 sama5 arm-sama5_defconfig : OFFLINE 2:35.41 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:25.36 socfpga arm-socfpga_defconfig : OFFLINE 2:37.13 socfpga arm-multi_v7_defconfig : OFFLINE 2:12.68 trimslice arm-multi_v7_defconfig : OFFLINE 2:13.70

Board legend is available at http://arm-soc.lixom.net/boards.html

Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.631415] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.641692] ledtrig-cpu: registered to indicate activity on CPUs [ 1.648770] usbcore: registered new interface driver usbhid [ 1.654695] usbhid: USB HID core driver [ 1.666734] NET: Registered protocol family 10 [ 1.673321] sit: IPv6 over IPv4 tunneling driver [ 1.679457] NET: Registered protocol family 17 [ 1.684223] can: controller area network core (rev 20120528 abi 9) [ 1.690861] NET: Registered protocol family 29 [ 1.695579] can: raw protocol (rev 20120528) [ 1.700097] can: broadcast manager protocol (rev 20120528 t) [ 1.706087] can: netlink gateway (rev 20130117) max_hops=1 [ 1.712826] Key type dns_resolver registered [ 1.717734] omap_voltage_late_init: Voltage driver support not added [ 1.726020] ThumbEE CPU extension supported. [ 1.730658] Registering SWP/SWPB emulation handler [ 1.772923] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.779452] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.787218] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.795930] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.803845] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.811690] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.819523] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.826881] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.835560] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.843485] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.853218] mmc1: new high speed MMC card at address 0001 [ 1.860470] hctosys: unable to open rtc device (rtc0) [ 1.873484] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.879510] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.886573] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.895409] mmcblk1: p1 p2 [ 1.901140] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [bbb 02:08]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 02:09]: got exception: timeout ~$off

[PYBOOT] [bbb 02:10]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.094576] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.100695] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.107021] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.113896] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.123491] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.132992] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.140007] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.181993] ledtrig-cpu: registered to indicate activity on CPUs [ 2.190813] oprofile: using arm/armv7 [ 2.195942] Initializing XFRM netlink socket [ 2.201056] NET: Registered protocol family 10 [ 2.212093] sit: IPv6 over IPv4 tunneling driver [ 2.221024] NET: Registered protocol family 17 [ 2.225983] NET: Registered protocol family 15 [ 2.231358] Key type dns_resolver registered [ 2.236204] omap_voltage_late_init: Voltage driver support not added [ 2.242949] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.251488] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.261963] ThumbEE CPU extension supported. [ 2.266500] Registering SWP/SWPB emulation handler [ 2.271623] SmartReflex Class3 initialized [ 2.329571] mmc1: new high speed MMC card at address 0001 [ 2.342704] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.353003] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.363268] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.383010] mmcblk1: p1 p2 [ 2.406669] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.414099] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.427337] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.435820] hctosys: unable to open rtc device (rtc0) [ 2.441142] sr_init: No PMIC hook to init smartreflex [ 2.446936] sr_init: platform driver register failed for SR [ 2.490833] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:52]: got exception: timeout ~$off

[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.723061] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.730141] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.755536] rtc-ds1307 2-006f: SET TIME! [ 1.761340] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.768084] rtc-ds1307 2-006f: 64 bytes nvram [ 1.772697] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.780926] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.786706] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.794955] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.804125] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.811006] hub 1-0:1.0: USB hub found [ 1.814965] hub 1-0:1.0: 1 port detected [ 1.819369] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.825149] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.833264] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.842278] hub 2-0:1.0: USB hub found [ 1.846248] hub 2-0:1.0: 1 port detected [ 1.852240] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.886137] vdd_3v3: supplied by regen1 [ 1.923842] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.941493] aic_dvdd_fixed: disabling [ 1.946242] Waiting for root device /dev/mmcblk0p1... [ 1.967083] mmc1: new high speed MMC card at address 0001 [ 1.973057] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.977947] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.984288] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.991154] mmcblk1: p1 [ 2.125021] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.160048] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.185380] hub 2-1:1.0: USB hub found [ 2.189349] hub 2-1:1.0: 4 ports detected [ 2.281412] hub 1-1:1.0: USB hub found [ 2.285399] hub 1-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 01:55]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:56]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:57]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.727914] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.734993] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.760536] rtc-ds1307 2-006f: SET TIME! [ 1.766285] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.773039] rtc-ds1307 2-006f: 64 bytes nvram [ 1.777652] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.785872] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.791651] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.799899] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.809066] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.815934] hub 1-0:1.0: USB hub found [ 1.819894] hub 1-0:1.0: 1 port detected [ 1.824298] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.830072] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.838190] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.847200] hub 2-0:1.0: USB hub found [ 1.851173] hub 2-0:1.0: 1 port detected [ 1.857188] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.891166] vdd_3v3: supplied by regen1 [ 1.929316] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.945718] aic_dvdd_fixed: disabling [ 1.950354] Waiting for root device /dev/mmcblk0p1... [ 1.972092] mmc1: new high speed MMC card at address 0001 [ 1.978062] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.982948] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.989288] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.996168] mmcblk1: p1 [ 2.130038] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.165067] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.190307] hub 2-1:1.0: USB hub found [ 2.194275] hub 2-1:1.0: 4 ports detected [ 2.286333] hub 1-1:1.0: USB hub found [ 2.290320] hub 1-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 01:42]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:43]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:44]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.197288] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.204158] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.214560] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.219412] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.225726] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.232579] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.242176] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.251680] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.258742] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.305205] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.311507] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.318372] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.327964] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.337471] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.344512] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.350638] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.356945] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.363789] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.373392] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.382895] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.389946] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.396660] vdd_3v3: supplied by regen1 [ 2.435298] hctosys: unable to open rtc device (rtc0) [ 2.440601] sr_init: No PMIC hook to init smartreflex [ 2.446115] sr_init: platform driver register failed for SR [ 2.486922] mmc1: new high speed MMC card at address 0001 [ 2.494877] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.495638] aic_dvdd_fixed: disabling [ 2.504132] ldousb: disabling [ 2.507390] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.516023] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.524761] mmcblk1: p1 [ 2.532310] Waiting for root device /dev/mmcblk0p1...

[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:43]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

[ 14.472661] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.546903] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.557231] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.631419] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.641747] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.715985] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.726312] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.800514] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.810843] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.885103] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.895439] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.969631] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.979957] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.054410] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.064739] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.138936] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.149283] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.223625] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.233948] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.308191] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.318510] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.392753] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.403083] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.477327] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.487652] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.561896] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.572225] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.646458] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.656785] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.730976] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.741305] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.815539] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.825869] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 14.084255] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.158244] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.168325] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.242309] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.252384] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.326370] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.336453] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.410442] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.420538] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.494538] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.504617] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.578608] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.588680] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.662672] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.672740] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.746731] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.756800] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.830791] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.840858] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.914849] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.924919] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.998910] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.008980] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.082992] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.093066] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.167052] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.177125] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.251110] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.261186] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.335173] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.345253] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.419247] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.429322] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 02:09]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:10]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:12]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.499952] Key type dns_resolver registered [ 2.506480] ThumbEE CPU extension supported. [ 2.510907] Registering SWP/SWPB emulation handler [ 2.561512] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.566828] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.575637] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.591599] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.598455] [drm] No driver support for vblank timestamp query. [ 2.612623] mmc1: new high speed MMC card at address 0001 [ 2.622091] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.629248] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.639144] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.648626] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.660542] mmcblk1: p1 [ 2.779376] Console: switching to colour frame buffer device 240x75 [ 2.866622] drm drm: fb0: frame buffer device [ 2.889192] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.899352] usb2_vbus: supplied by vdd-sys-5v0 [ 2.910043] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.915675] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.924542] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.939227] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.949693] hub 1-0:1.0: USB hub found [ 2.953730] hub 1-0:1.0: 1 port detected [ 2.963736] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.977689] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.040108] dvdd_ts: disabling [ 3.043207] usb1_vbus: disabling [ 3.046582] vdd_cam_1v8_reg: disabling [ 3.054230] Waiting for root device /dev/mmcblk0p1... [ 3.264194] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.226838] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 62.524194] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:52]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:53]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.494962] Key type dns_resolver registered [ 2.501437] ThumbEE CPU extension supported. [ 2.505856] Registering SWP/SWPB emulation handler [ 2.554192] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.561306] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.571356] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.586225] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.592984] [drm] No driver support for vblank timestamp query. [ 2.598477] mmc1: new high speed MMC card at address 0001 [ 2.602034] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.605375] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.608258] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.611107] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.618721] mmcblk1: p1 [ 2.796346] Console: switching to colour frame buffer device 240x75 [ 2.883557] drm drm: fb0: frame buffer device [ 2.899351] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.909474] usb2_vbus: supplied by vdd-sys-5v0 [ 2.919151] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.924727] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.933533] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.949364] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.959787] hub 1-0:1.0: USB hub found [ 2.963789] hub 1-0:1.0: 1 port detected [ 2.974871] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.989156] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.051091] dvdd_ts: disabling [ 3.054313] usb1_vbus: disabling [ 3.057571] vdd_cam_1v8_reg: disabling [ 3.065077] Waiting for root device /dev/mmcblk0p1... [ 3.274363] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.237010] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 65.649326] random: nonblocking pool is initialized

[PYBOOT] [dalmore 02:16]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 02:17]: got exception: timeout ~$off

[PYBOOT] [dalmore 02:18]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------

[ 2.859206] Bluetooth: RFCOMM ver 1.11 [ 2.863158] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.868585] Bluetooth: BNEP socket layer initialized [ 2.873951] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.879955] Bluetooth: HIDP socket layer initialized [ 2.886433] Key type dns_resolver registered [ 2.896039] Registering SWP/SWPB emulation handler [ 2.921264] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.926558] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.933929] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.955492] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.962406] [drm] No driver support for vblank timestamp query. [ 3.140089] Console: switching to colour frame buffer device 240x75 [ 3.227234] drm drm: fb0: frame buffer device [ 3.261922] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.269142] usb2_vbus: supplied by vdd-sys-5v0 [ 3.278456] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.284263] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.294889] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.311926] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.326077] hub 1-0:1.0: USB hub found [ 3.330072] hub 1-0:1.0: 1 port detected [ 3.343765] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.358885] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.453307] dvdd_ts: disabling [ 3.456411] usb1_vbus: disabling [ 3.459675] vdd_cam_1v8_reg: disabling [ 3.464473] ALSA device list: [ 3.467467] #0: NVIDIA Tegra Dalmore [ 3.473364] Waiting for root device /dev/mmcblk0p1... [ 3.651932] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.686123] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 47.765358] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:45]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:46]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:47]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------

[ 1.769863] dwmmc_exynos 12550000.mmc: DW MMC controller at irq 107,32 bit host data width,128 deep fifo [ 1.779299] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 1.786351] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.817452] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.818645] usbcore: registered new interface driver usbhid [ 1.823869] usbhid: USB HID core driver [ 1.832524] NET: Registered protocol family 10 [ 1.833117] sit: IPv6 over IPv4 tunneling driver [ 1.836370] NET: Registered protocol family 17 [ 1.840392] NET: Registered protocol family 15 [ 1.844863] Key type dns_resolver registered [ 1.849167] Registering SWP/SWPB emulation handler [ 1.855927] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.861597] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.887988] max98090 1-0010: MAX98090 REVID=0x43 [ 1.890253] max98090 1-0010: use default 2.8v micbias [ 1.892610] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.902124] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.911688] mmc1: new DDR MMC card at address 0001 [ 1.916765] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.925175] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.932538] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.934257] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.940048] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.945997] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.952463] mmcblk1: p1 p2 [ 1.984004] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 2.003574] VDD10_HDMI_1.0V: disabling [ 2.004267] vdd_g3d: disabling [ 2.005346] BUCK8_2.8V: disabling [ 2.009362] ALSA device list: [ 2.010967] #0: Odroid-U3 [ 2.014687] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [odroidu3 01:59]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 02:00]: got exception: timeout ~$off

[PYBOOT] [odroidu3 02:01]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.509131] r7 : 00000000 r6 : 7badfcc0 r5 : 00000001 r4 : eefd5e90 [ 2.515960] r3 : 00000000 r2 : 004c4b40 r1 : 00000000 r0 : 004c4b40 [ 2.522785] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 2.530341] Control: 10c5387d Table: 8020406a DAC: 00000051 [ 2.536354] Process swapper/1 (pid: 0, stack limit = 0xee098220) [ 2.542637] Stack: (0xee099ef8 to 0xee09a000) [ 2.547200] 9ee0: 0000e000 c03452bc [ 2.555759] 9f00: 00000000 eefdbe40 00000000 00000000 8583bcb7 00000000 ffffffff 7fffffff [ 2.564309] 9f20: c1302510 ee098000 00000000 00000000 00000001 ee008000 fa213000 c140dfe8 [ 2.572869] 9f40: c1302510 c0345624 c12054cc c0383fd8 c1302888 c1340178 fa21200c ee099f88 [ 2.581430] 9f60: fa212000 c0301798 c0308740 a0000013 ffffffff ee099fbc c12075c0 c1302508 [ 2.589985] 9f80: c140dfe8 c030c4d4 00000001 00000000 ea000013 f0880000 ee098000 c13024a4 [ 2.598537] 9fa0: 00000000 00000000 c12075c0 c1302508 c140dfe8 c1302510 60000013 ee099fd8 [ 2.607090] 9fc0: c032af90 c0308740 a0000013 ffffffff 00000051 c030873c ee098000 c0378300 [ 2.615648] 9fe0: 00000051 ee099fe0 ae08006a c14106b0 00000000 80301c8c 2089c1e5 251020b1 [ 2.624218] [<c03a4f68>] (__tick_nohz_idle_enter) from [<c0345624>] (irq_exit+0xc8/0x114) [ 2.632783] [<c0345624>] (irq_exit) from [<c0383fd8>] (__handle_domain_irq+0x60/0xb4) [ 2.640980] [<c0383fd8>] (__handle_domain_irq) from [<c0301798>] (gic_handle_irq+0x54/0x94) [ 2.649717] [<c0301798>] (gic_handle_irq) from [<c030c4d4>] (__irq_svc+0x54/0x70) [ 2.657545] Exception stack(0xee099f88 to 0xee099fd0) [ 2.662831] 9f80: 00000001 00000000 ea000013 f0880000 ee098000 c13024a4 [ 2.671389] 9fa0: 00000000 00000000 c12075c0 c1302508 c140dfe8 c1302510 60000013 ee099fd8 [ 2.679939] 9fc0: c032af90 c0308740 a0000013 ffffffff [ 2.685231] [<c030c4d4>] (__irq_svc) from [<c0308740>] (arch_cpu_idle+0x20/0x3c) [ 2.692972] [<c0308740>] (arch_cpu_idle) from [<c0378300>] (cpu_startup_entry+0x1bc/0x218) [ 2.701628] [<c0378300>] (cpu_startup_entry) from [<80301c8c>] (0x80301c8c) [ 2.708920] Code: e1a03009 e1a00004 ebffff34 e59d3010 (e1c321d0) [ [ 2 . 7 12.5729157]2 9I7]n tIernntearl nealr reorr:r oOr:op sO:o ps3:7 3[#7 3[] #S3M]P S MAPR MAR[M [2 . 71 5 230.741] 5C30P4U:] C0 PPU:I D0: 7PI3 DC: om7m3 C[ e n er i2.c7 1OM5A3P055] ( FHlaradtwtaerneed n aDemve:ic Ge enTererei)c O MA P 5 ( F 4l.a6t.t0en-e0d06 D42e-vig9cea 45Tfr0ee3 )# 1 [ [ 2 .27.157135138]18 ]P CP Ci si sa ta kthread_data+0x4/0xc sk.ti: ee5e4000

[PYBOOT] [omap5uevm 02:22]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:23]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:25]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.059534] 9e00: 00000000 ee649e24 00000001 c08d1510 ee649e24 00000000 ee513c00 00000000 [ 2.059538] 9e20: ee63a410 05010000 00030003 00000501 ee27de00 00000002 00000001 ee513c00 [ 2.059543] 9e40: ee27de40 00000001 ee27df14 c08d18fc 00000000 00000000 ee63a200 ee63a3a4 [ 2.059547] 9e60: ee513800 40000001 ee63a200 ee513c00 00000002 00000001 ee27df14 ee63a3a4 [ 2.059551] 9e80: ee63a3a4 00000000 00000501 00000001 00000002 00000001 ee27df14 c08d21a0 [ 2.059556] 9ea0: ee649ee2 00000000 ee27dc00 ee27de00 ee513ca4 ee27de38 ee63a208 ee27de44 [ 2.059561] 9ec0: ee27de3c ee27dc20 00000000 ee513c00 ee649f24 c0f62c10 c0f82f08 c0f82f30 [ 2.059565] 9ee0: 00010501 00000000 ee63b4b0 ee27df14 ee2fbf80 eefcce40 00000000 eefd1900 [ 2.059569] 9f00: 00000000 eefcce40 ee2fbf80 c0356714 c1302100 eefcce58 eefcce40 ee2fbf98 [ 2.059574] 9f20: 00000008 c1302100 eefcce58 ee648000 eefcce40 c03575f0 ee2fd780 ee2fbf80 [ 2.059578] 9f40: c0357348 00000000 ee2fd780 ee2fbf80 c0357348 00000000 00000000 00000000 [ 2.059582] 9f60: 00000000 c035c144 00000000 00000000 aca90c02 ee2fbf80 00000000 00000000 [ 2.059586] 9f80: ee649f80 ee649f80 00000000 00000000 ee649f90 ee649f90 ee2fd780 ee2fd780 [ 2.059590] 9fa0: c035c068 00000000 00000000 c0307d38 00000000 00000000 00000000 00000000 [ 2.059594] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.059598] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 200949e5 25102031 [ 2.059610] [<c0369cf8>] (set_next_entity) from [<c03716d0>] (pick_next_task_fair+0xbc/0x178) [ 2.059619] [<c03716d0>] (pick_next_task_fair) from [<c0b5415c>] (__schedule+0xf0/0x590) [ 2.059626] [<c0b5415c>] (__schedule) from [<c0b54640>] (schedule+0x44/0x9c) [ 2.059632] [<c0b54640>] (schedule) from [<c0b57234>] (schedule_timeout+0x124/0x1b0) [ 2.059639] [<c0b57234>] (schedule_timeout) from [<c0b55178>] (wait_for_common+0xa8/0x16c) [ 2.059646] [<c0b55178>] (wait_for_common) from [<c08d7118>] (usb_start_wait_urb+0x68/0xbc) [ 2.059653] [<c08d7118>] (usb_start_wait_urb) from [<c08d720c>] (usb_control_msg+0xa0/0xcc) [ 2.059660] [<c08d720c>] (usb_control_msg) from [<c08cce50>] (hub_ext_port_status+0x84/0x138) [ 2.059665] [<c08cce50>] (hub_ext_port_status) from [<c08d1510>] (hub_port_debounce+0x70/0xdc) [ 2.059670] [<c08d1510>] (hub_port_debounce) from [<c08d18fc>] (hub_port_connect+0x380/0x884) [ 2.059673] [<c08d18fc>] (hub_port_connect) from [<c08d21a0>] (hub_event+0x3a0/0x794) [ 2.059679] [<c08d21a0>] (hub_event) from [<c0356714>] (process_one_work+0x1ec/0x410) [ 2.059684] [<c0356714>] (process_one_work) from [<c03575f0>] (worker_thread+0x2a8/0x594) [ 2.059690] [<c03575f0>] (worker_thread) from [<c035c144>] (kthread+0xdc/0xf4) [ 2.059698] [<c035c144>] (kthread) from [<c0307d38>] (ret_from_fork+0x14/0x3c) [ 2.059704] Code: 1a000030 f57ff05a e1c428d8 e199100e (e1c42cf0) [ 2.059707] ---[ end trace 039c8c14e463b17c ]---

[PYBOOT] [omap5uevm 02:04]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:05]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:06]: Done. Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.523006] isl29018 7-0044: No cache defaults, reading back from HW [ 1.529354] isl29018 7-0044: Failed to read 1: -6 [ 1.533936] isl29018 7-0044: regmap initialization fails: -6 [ 1.544188] NET: Registered protocol family 10 [ 1.548636] sit: IPv6 over IPv4 tunneling driver [ 1.552223] NET: Registered protocol family 17 [ 1.556221] can: controller area network core (rev 20120528 abi 9) [ 1.562410] NET: Registered protocol family 29 [ 1.566799] can: raw protocol (rev 20120528) [ 1.571048] can: broadcast manager protocol (rev 20120528 t) [ 1.576690] can: netlink gateway (rev 20130117) max_hops=1 [ 1.582407] Key type dns_resolver registered [ 1.586734] ThumbEE CPU extension supported. [ 1.590639] Registering SWP/SWPB emulation handler [ 1.599802] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.605277] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.611645] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.617022] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.627094] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.633054] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.646514] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.652250] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.658355] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.663732] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.673476] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.695550] Waiting for root device /dev/mmcblk0p1... [ 1.699401] mmc0: tuning execution failed: -5 [ 1.703483] mmc0: error -5 whilst initialising MMC card [ 2.572825] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.586071] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.591532] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.597906] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.603289] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo

[PYBOOT] [pi 01:47]: Timed out waiting for "<type 'str'>":

[PYBOOT] [pi 01:48]: got exception: timeout ~$off

[PYBOOT] [pi 01:49]: Done. Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.522978] isl29018 7-0044: No cache defaults, reading back from HW [ 1.529324] isl29018 7-0044: Failed to read 1: -6 [ 1.533908] isl29018 7-0044: regmap initialization fails: -6 [ 1.544152] NET: Registered protocol family 10 [ 1.548602] sit: IPv6 over IPv4 tunneling driver [ 1.552187] NET: Registered protocol family 17 [ 1.556185] can: controller area network core (rev 20120528 abi 9) [ 1.562375] NET: Registered protocol family 29 [ 1.566762] can: raw protocol (rev 20120528) [ 1.571011] can: broadcast manager protocol (rev 20120528 t) [ 1.576654] can: netlink gateway (rev 20130117) max_hops=1 [ 1.582376] Key type dns_resolver registered [ 1.586704] ThumbEE CPU extension supported. [ 1.590603] Registering SWP/SWPB emulation handler [ 1.599795] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.605268] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.611635] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.617011] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.627080] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.633044] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.646492] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.652221] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.658327] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.663703] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.673444] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.695533] Waiting for root device /dev/mmcblk0p1... [ 1.699380] mmc0: tuning execution failed: -5 [ 1.703464] mmc0: error -5 whilst initialising MMC card [ 2.572786] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.586046] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.591504] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.597879] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.603263] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo

[PYBOOT] [pi 02:06]: Timed out waiting for "<type 'str'>":

[PYBOOT] [pi 02:07]: got exception: timeout ~$off

[PYBOOT] [pi 02:08]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.651498] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.657871] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.671915] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.678421] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.683908] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.691884] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.703648] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.710924] hub 3-0:1.0: USB hub found [ 1.714820] hub 3-0:1.0: 1 port detected [ 1.719894] mmc2: switch to bus width 8 failed [ 1.727192] mmc2: switch to bus width 4 failed [ 1.731698] mmc2: new high speed MMC card at address 0001 [ 1.738013] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.740692] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.740696] [drm] No driver support for vblank timestamp query. [ 1.755841] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.763381] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.771593] mmcblk2: p3 [ 1.794221] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.802409] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.805372] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.812900] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.832560] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.839713] mmc0: new SDIO card at address 0001 [ 1.857014] Console: switching to colour frame buffer device 170x48 [ 1.918019] drm drm: fb0: frame buffer device [ 1.933637] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.940801] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.948044] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.963727] vdd_1v5: disabling [ 1.966803] vdd_1v2: disabling [ 2.607678] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.619056] Waiting for root device /dev/mmcblk0p3...

[PYBOOT] [seaboard 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:52]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:54]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------

[ 1.772595] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.777926] Bluetooth: BNEP socket layer initialized [ 1.782917] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.788860] Bluetooth: HIDP socket layer initialized [ 1.794464] Key type dns_resolver registered [ 1.799942] Registering SWP/SWPB emulation handler [ 1.815676] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.822432] VDDIO_HDMI: supplied by vdd_5v0 [ 1.826887] vdd_sys: supplied by vdd_5v0 [ 1.830944] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.835906] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.842514] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.853073] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.859532] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.865571] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.873555] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.890792] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.899212] hub 3-0:1.0: USB hub found [ 1.903021] hub 3-0:1.0: 1 port detected [ 1.914414] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.921042] [drm] No driver support for vblank timestamp query. [ 1.990696] Console: switching to colour frame buffer device 170x48 [ 2.010581] drm drm: fb0: frame buffer device [ 2.040781] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.048062] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.055723] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.075606] vdd_1v5: disabling [ 2.078658] vdd_1v2: disabling [ 2.081867] ALSA device list: [ 2.084827] #0: NVIDIA Tegra Seaboard [ 2.430117] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.442099] Waiting for root device /dev/mmcblk0p3... [ 59.970892] random: nonblocking pool is initialized

[PYBOOT] [seaboard 01:46]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:47]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:48]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.942199] ledtrig-cpu: registered to indicate activity on CPUs [ 1.949035] usbcore: registered new interface driver usbhid [ 1.954650] usbhid: USB HID core driver [ 1.968933] NET: Registered protocol family 10 [ 1.975128] sit: IPv6 over IPv4 tunneling driver [ 1.980957] NET: Registered protocol family 17 [ 1.985473] can: controller area network core (rev 20120528 abi 9) [ 1.991790] NET: Registered protocol family 29 [ 1.996276] can: raw protocol (rev 20120528) [ 2.000579] can: broadcast manager protocol (rev 20120528 t) [ 2.006286] can: netlink gateway (rev 20130117) max_hops=1 [ 2.012664] Key type dns_resolver registered [ 2.017333] ThumbEE CPU extension supported. [ 2.021667] Registering SWP/SWPB emulation handler [ 2.031066] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.038177] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.047698] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.054748] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.061798] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.068847] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.085968] db8500-esram12: disabling [ 2.090881] db8500-esram34: disabling [ 2.097015] V-CSI/DSI: disabling [ 2.100341] mmci-reg: disabling [ 2.104339] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.110382] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.117004] Waiting for root device /dev/mmcblk0p4... [ 2.154327] mmc3: new high speed MMC card at address 0001 [ 2.160583] mmcblk3: mmc3:0001 3.53 GiB [ 2.164978] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.170684] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.176483] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.183410] mmcblk3: p1 p2 p3 p4

[PYBOOT] [snowball 02:03]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:04]: got exception: timeout ~$off

[PYBOOT] [snowball 02:05]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------

[ 2.657562] iio iio:device1: registered pressure sensor lps001wp [ 2.664062] coresight-tpiu 80190000.tpiu: TPIU initialized [ 2.670104] coresight-etb10 801a4000.etb: ETB initialized [ 2.675842] coresight-funnel 801a6000.funnel: FUNNEL initialized [ 2.682403] coresight-replicator soc:replicator: REPLICATOR initialized [ 2.697204] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.707977] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.717895] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.728607] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.752502] NET: Registered protocol family 10 [ 2.757873] sit: IPv6 over IPv4 tunneling driver [ 2.763305] NET: Registered protocol family 17 [ 2.767791] NET: Registered protocol family 35 [ 2.772369] NET: Registered protocol family 37 [ 2.776947] Registering SWP/SWPB emulation handler [ 2.783325] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.789489] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.796142] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.803405] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-27 20:43:26 UTC (956868206) [ 2.812652] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.819671] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.826690] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.833679] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.847839] db8500-esram12: disabling [ 2.851623] db8500-esram34: disabling [ 2.855834] V-CSI/DSI: disabling [ 2.859100] mmci-reg: disabling [ 2.862426] ALSA device list: [ 2.865386] #0: MOP500-card [ 2.868713] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.874694] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.880889] Waiting for root device /dev/mmcblk0p4... [ 79.480194] random: nonblocking pool is initialized

[PYBOOT] [snowball 01:53]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 01:54]: got exception: timeout ~$off

[PYBOOT] [snowball 01:55]: Done.