Automated DT boot report for various ARM defconfigs.
Tree/Branch: mainline Git describe: v3.14-rc1-15-gf8f2023 Failed boot tests (console logs at the end) =========================================== omap5-uevm: FAIL: omap2plus_defconfig sun7i-a20-cubieboard2: FAIL: multi_lpae_defconfig sun7i-a20-cubieboard2: FAIL: sunxi_defconfig sun7i-a20-cubieboard2: FAIL: multi_v7_defconfig omap4-panda: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: multi_v7_defconfig armada-xp-openblocks-ax3-4: FAIL: mvebu_defconfig
Full Report ===========
omap2plus_defconfig ------------------- am335x-boneblack PASS: 0 min 25.9 sec omap3-beagle-xm PASS: 0 min 54.9 sec omap4-panda PASS: 1 min 4.9 sec am335x-bone PASS: 0 min 27.6 sec omap5-uevm FAIL: 0 min 31.4 sec omap4-panda-es PASS: 1 min 7.3 sec
multi_lpae_defconfig -------------------- omap5-uevm PASS: 1 min 42.0 sec sun7i-a20-cubieboard2 FAIL: 0 min 31.4 sec
tegra_defconfig --------------- tegra30-beaver PASS: 0 min 17.1 sec
imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 18.9 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.7 sec imx6q-wandboard PASS: 0 min 17.2 sec
sunxi_defconfig --------------- sun7i-a20-cubieboard2 FAIL: 0 min 31.4 sec sun4i-a10-cubieboard PASS: 0 min 12.8 sec
bcm_defconfig ------------- bcm28155-ap PASS: 0 min 58.9 sec
exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 29.7 sec
multi_v7_defconfig ------------------ ste-snowball PASS: 1 min 21.0 sec tegra30-beaver PASS: 0 min 20.1 sec am335x-boneblack PASS: 0 min 23.6 sec omap3-beagle-xm PASS: 0 min 50.6 sec sun7i-a20-cubieboard2 FAIL: 0 min 31.4 sec armada-370-mirabox PASS: 0 min 22.2 sec omap4-panda FAIL: 1 min 45.3 sec armada-xp-openblocks-ax3-4 FAIL: 0 min 22.9 sec sun4i-a10-cubieboard PASS: 0 min 18.8 sec bcm28155-ap PASS: 1 min 14.7 sec imx6dl-wandboard,wand-solo PASS: 0 min 17.8 sec am335x-bone PASS: 0 min 26.2 sec omap5-uevm PASS: 1 min 44.9 sec imx6q-wandboard PASS: 0 min 17.4 sec omap4-panda-es PASS: 0 min 54.8 sec imx6dl-wandboard,wand-dual PASS: 0 min 18.5 sec
u8500_defconfig --------------- ste-snowball PASS: 0 min 33.9 sec
sama5_defconfig --------------- sama5d35ek PASS: 0 min 17.6 sec
mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 FAIL: 0 min 20.4 sec armada-370-mirabox PASS: 0 min 20.2 sec
Console logs for failures =========================
omap2plus_defconfig -------------------
omap5-uevm: FAIL: last 80 lines of boot log: --------------------------------------------
Connected to omap5uevm console [channel connected] (~$quit to exit) (user:khilman) is already connected
~$hardreset
Command(omap5uevm console)> hardreset (user:khilman) Reboot omap5uevm Connected. Reboot: omap5uevm ; phidget 1 2 : off, sleep, on Connected.
Disconnected. 0 mmc0 is current device SD/MMC found on device 0 reading uEnv.txt ** Unable to read file uEnv.txt ** ** File not found /boot/zImage ** mmc1(part 0) is current device found: 002/099 2 SD/MMC found on device 1 ** Unrecognized filesystem type ** ** No partition table - mmc 1 ** U-Boot# ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.39 seconds. # PYBOOT: Result: FAIL
multi_lpae_defconfig --------------------
sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: -------------------------------------------------------
Connected to cubie2 console [channel connected] (~$quit to exit) (user:khilman) is already connected
~$hardreset
Command(cubie2 console)> hardreset (user:khilman) Reboot cubie2 Reboot: cubie2 ; phidget 3 0 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.37 seconds. # PYBOOT: Result: FAIL
sunxi_defconfig ---------------
sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: -------------------------------------------------------
Connected to cubie2 console [channel connected] (~$quit to exit) (user:khilman) is already connected
~$hardreset
Command(cubie2 console)> hardreset (user:khilman) Reboot cubie2 Reboot: cubie2 ; phidget 3 0 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.39 seconds. # PYBOOT: Result: FAIL
multi_v7_defconfig ------------------
sun7i-a20-cubieboard2: FAIL: last 80 lines of boot log: -------------------------------------------------------
Connected to cubie2 console [channel connected] (~$quit to exit) (user:khilman) is already connected
~$hardreset
Command(cubie2 console)> hardreset (user:khilman) Reboot cubie2 Reboot: cubie2 ; phidget 3 0 : off, sleep, on ~$off # PYBOOT: Exception: ERROR: Could not break into autoboot. # PYBOOT: Time: 31.39 seconds. # PYBOOT: Result: FAIL
omap4-panda: FAIL: last 80 lines of boot log: ---------------------------------------------
[ 1.411132] usbcore: registered new interface driver asix [ 1.416870] usbcore: registered new interface driver ax88179_178a [ 1.423309] usbcore: registered new interface driver cdc_ether [ 1.429473] usbcore: registered new interface driver r815x [ 1.435302] usbcore: registered new interface driver smsc75xx [ 1.441406] usbcore: registered new interface driver smsc95xx [ 1.447479] usbcore: registered new interface driver net1080 [ 1.453460] usbcore: registered new interface driver cdc_subset [ 1.459716] usbcore: registered new interface driver zaurus [ 1.465667] usbcore: registered new interface driver cdc_ncm [ 1.471618] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.478485] ehci-pci: EHCI PCI platform driver [ 1.483184] ehci-platform: EHCI generic platform driver [ 1.488830] ehci-omap: OMAP-EHCI Host Controller driver [ 1.514617] unable to find transceiver [ 1.518554] ehci-omap 4a064c00.ehci: EHCI Host Controller [ 1.524261] ehci-omap 4a064c00.ehci: new USB bus registered, assigned bus number 1 [ 1.532653] ehci-omap 4a064c00.ehci: irq 109, io mem 0x4a064c00 [ 1.552642] ehci-omap 4a064c00.ehci: USB 2.0 started, EHCI 1.00 [ 1.559692] hub 1-0:1.0: USB hub found [ 1.563659] hub 1-0:1.0: 3 ports detected [ 1.568420] ehci-orion: EHCI orion driver [ 1.572875] SPEAr-ehci: EHCI SPEAr driver [ 1.577209] tegra-ehci: Tegra EHCI driver [ 1.582122] usbcore: registered new interface driver usb-storage [ 1.590179] mousedev: PS/2 mouse device common for all mice [ 1.598297] i2c /dev entries driver [ 1.604217] sdhci: Secure Digital Host Controller Interface driver [ 1.610717] sdhci: Copyright(c) Pierre Ossman [ 1.616119] omap_hsmmc 4809c000.mmc: vmmc regulator missing [ 1.622039] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.629821] omap_hsmmc 480d5000.mmc: vmmc regulator missing [ 1.635742] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.643615] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.650390] usbcore: registered new interface driver usbhid [ 1.656249] usbhid: USB HID core driver [ 1.664367] TCP: cubic registered [ 1.667846] NET: Registered protocol family 17 [ 1.672760] Key type dns_resolver registered [ 1.677886] Power Management for TI OMAP4+ devices. [ 1.683074] Power Management for TI OMAP4. [ 1.687347] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.694488] Registering SWP/SWPB emulation handler [ 1.700714] vwl1271: 1800 mV [ 1.708496] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 1.718872] twl 0-0048: PIH (irq 39) nested IRQs [ 1.725463] twl_rtc rtc.10: Enabling TWL-RTC [ 1.732543] twl_rtc rtc.10: rtc core: registered rtc.10 as rtc0 [ 1.739501] VAUX1_6030: 1000 <--> 3000 mV at 1800 mV [ 1.745605] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 1.751739] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 1.757843] VMMC: 1200 <--> 3000 mV at 3000 mV [ 1.763397] VPP: 1800 <--> 2500 mV at 1900 mV [ 1.768890] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.774383] VDAC: 1800 mV [ 1.774383] VANA: 2100 mV [ 1.781280] VCXIO: 1800 mV [ 1.784667] VUSB: 3300 mV [ 1.788208] V1V8: 1800 mV [ 1.791809] V2V1: 2100 mV [ 1.912902] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.042999] omap_i2c 48070000.i2c: bus 0 rev0.10 at 400 kHz [ 2.050872] omap_i2c 48072000.i2c: bus 1 rev0.10 at 400 kHz [ 2.061798] omap_i2c 48060000.i2c: bus 2 rev0.10 at 100 kHz [ 2.069580] hub 1-1:1.0: USB hub found [ 2.073791] hub 1-1:1.0: 5 ports detected [ 2.078582] omap_i2c 48350000.i2c: bus 3 rev0.10 at 400 kHz [ 2.085540] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 2.094177] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.143402] 480d5000.mmc supply vmmc_aux not found, using dummy regulator [ 2.203338] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.213958] mmc0: new high speed SD card at address f3c2 [ 2.220001] isa bounce pool size: 16 pages [ 2.224487] mmcblk0: mmc0:f3c2 SD02G 1.84 GiB [ 2.231079] mmcblk0: p1 p2 [ 10.618011] [sched_delayed] sched: RT throttling activated ~$off # PYBOOT: Exception: kernel: ERROR: failed to boot: <class 'pexpect.TIMEOUT'> # PYBOOT: Time: 105.26 seconds. # PYBOOT: Result: FAIL
armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------
[ 0.434891] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.456147] d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 20, base_baud = 15625000) is a 16550A [ 1.189253] console [ttyS0] enabled [ 1.213261] d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 21, base_baud = 15625000) is a 16550A [ 1.222471] Serial: IMX driver [ 1.225741] STMicroelectronics ASC driver initialized [ 1.231158] serial: Freescale lpuart driver [ 1.235448] [drm] Initialized drm 1.1.0 20060810 [ 1.243040] loop: module loaded [ 1.246685] sata_mv d00a0000.sata: version 1.28 [ 1.251290] sata_mv d00a0000.sata: unable to find phy [ 1.256362] Unable to handle kernel NULL pointer dereference at virtual address 00000054 [ 1.264492] pgd = c0004000 [ 1.267215] [00000054] *pgd=00000000 [ 1.270812] Internal error: Oops: 5 [#1] SMP ARM [ 1.275438] Modules linked in: [ 1.278512] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc1-00015-gf8f2023 #1 [ 1.286100] task: ed04c000 ti: ed058000 task.ti: ed058000 [ 1.291521] PC is at __clk_put+0x1c/0x8c [ 1.295453] LR is at clk_prepare_lock+0x10/0xfc [ 1.299996] pc : [<c0493378>] lr : [<c0490a24>] psr: 60000113 [ 1.299996] sp : ed059e10 ip : 00000000 fp : 0000001f [ 1.311502] r10: ed3a3190 r9 : ed0d3c00 r8 : 00000004 [ 1.316740] r7 : ffffffed r6 : 00000000 r5 : ed276010 r4 : 00000000 [ 1.323282] r3 : ed04c000 r2 : ed04c000 r1 : ed059e00 r0 : 00000054 [ 1.329826] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel [ 1.337153] Control: 10c5387d Table: 0000406a DAC: 00000015 [ 1.342912] Process swapper/0 (pid: 1, stack limit = 0xed058240) [ 1.348933] Stack: (0xed059e10 to 0xed05a000) [ 1.353301] 9e00: 00000001 c036174c c085a730 000000df [ 1.361501] 9e20: ed0ce1b0 00000002 c0608df4 00000000 74726f70 ed0c0030 00000001 ed3a2ab0 [ 1.369701] 9e40: 000000df ed0d3c10 c091caf8 00000000 c091caf8 c085a730 000000df ed058030 [ 1.377900] 9e60: 00000000 c0304c28 c0304c10 ed0d3c10 c0985c8c c0303484 00000000 ed0d3c10 [ 1.386100] 9e80: c091caf8 ed0d3c44 00000000 c0303670 00000000 c091caf8 c03035e4 c0301a9c [ 1.394299] 9ea0: ed03b85c ed09a934 c091caf8 ed3a3100 c0916eb8 c0302c4c c0776adc c094b6c0 [ 1.402499] 9ec0: c091caf8 c091caf8 00000006 c094b6c0 c094b6c0 c0303c74 00000000 c089f18c [ 1.410699] 9ee0: 00000006 c085a760 c089f18c c0008bbc ed003c00 c072b1d4 ed0c7380 c05a4da0 [ 1.418898] 9f00: 00000000 c094b6c0 c082150c c012dab4 00000000 c08e63d8 60000113 00000001 [ 1.427097] 9f20: ee7ffe1b c05b45b8 000000df c005d48c c07ebf00 00000006 ee7ffe26 00000006 [ 1.435297] 9f40: c08e63c8 c089f18c 00000006 c094b6c0 c094b6c0 c082150c 000000df c08818c4 [ 1.443496] 9f60: c08818b8 c0821c48 00000006 00000006 c082150c 88855891 15413389 b850a414 [ 1.451696] 9f80: 15a08542 00000000 c0593ac4 00000000 00000000 00000000 00000000 00000000 [ 1.459895] 9fa0: 00000000 c0593acc 00000000 c000e5b8 00000000 00000000 00000000 00000000 [ 1.468094] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 1.476293] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 c9441725 254484d0 [ 1.484502] [<c0493378>] (__clk_put) from [<c036174c>] (mv_platform_probe+0x2c0/0x43c) [ 1.492446] [<c036174c>] (mv_platform_probe) from [<c0304c28>] (platform_drv_probe+0x18/0x48) [ 1.500996] [<c0304c28>] (platform_drv_probe) from [<c0303484>] (driver_probe_device+0x124/0x240) [ 1.509894] [<c0303484>] (driver_probe_device) from [<c0303670>] (__driver_attach+0x8c/0x90) [ 1.518356] [<c0303670>] (__driver_attach) from [<c0301a9c>] (bus_for_each_dev+0x60/0x94) [ 1.526556] [<c0301a9c>] (bus_for_each_dev) from [<c0302c4c>] (bus_add_driver+0x148/0x1f0) [ 1.534844] [<c0302c4c>] (bus_add_driver) from [<c0303c74>] (driver_register+0x78/0xf8) [ 1.542872] [<c0303c74>] (driver_register) from [<c085a760>] (mv_init+0x30/0x50) [ 1.550290] [<c085a760>] (mv_init) from [<c0008bbc>] (do_one_initcall+0xf8/0x144) [ 1.557798] [<c0008bbc>] (do_one_initcall) from [<c0821c48>] (kernel_init_freeable+0x13c/0x1dc) [ 1.566522] [<c0821c48>] (kernel_init_freeable) from [<c0593acc>] (kernel_init+0x8/0xf0) [ 1.574638] [<c0593acc>] (kernel_init) from [<c000e5b8>] (ret_from_fork+0x14/0x3c) [ 1.582229] Code: 8a000012 ebfff5a8 e2840054 f57ff05b (e1903f9f) [ 1.588370] ---[ end trace 27673af75423710d ]--- [ 1.593009] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 1.593009] [ 1.602169] CPU0: stopping [ 1.604887] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G D 3.14.0-rc1-00015-gf8f2023 #1 [ 1.613444] [<c001588c>] (unwind_backtrace) from [<c001143c>] (show_stack+0x10/0x14) [ 1.621213] [<c001143c>] (show_stack) from [<c0599638>] (dump_stack+0x84/0x94) [ 1.628457] [<c0599638>] (dump_stack) from [<c0014160>] (handle_IPI+0x148/0x174) [ 1.635874] [<c0014160>] (handle_IPI) from [<c00086fc>] (armada_370_xp_handle_irq+0xa8/0x114) [ 1.644423] [<c00086fc>] (armada_370_xp_handle_irq) from [<c0011fc0>] (__irq_svc+0x40/0x50) [ 1.652793] Exception stack(0xc08a3f68 to 0xc08a3fb0) [ 1.657859] 3f60: ffffffed 2d736000 c08ab4e4 00000000 c08aa4cc c08a2000 [ 1.666059] 3f80: c08aa450 c094b54b c05a4128 c08a2000 c094b54b c08a2000 00000000 c08a3fb0 [ 1.674257] 3fa0: c000f158 c0081194 60000113 ffffffff [ 1.679327] [<c0011fc0>] (__irq_svc) from [<c0081194>] (cpu_startup_entry+0x100/0x144) [ 1.687269] [<c0081194>] (cpu_startup_entry) from [<c0821b00>] (start_kernel+0x358/0x364) [ 1.695468] [<c0821b00>] (start_kernel) from [<00008074>] (0x8074) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054
# PYBOOT: Time: 22.92 seconds. # PYBOOT: Result: FAIL
mvebu_defconfig ---------------
armada-xp-openblocks-ax3-4: FAIL: last 80 lines of boot log: ------------------------------------------------------------
mv_xor d0060900.xor: Marvell shared XOR driver mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d0060900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell shared XOR driver mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) mv_xor d00f0900.xor: Marvell XOR: ( xor cpy ) Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled d0012000.serial: ttyS0 at MMIO 0xd0012000 (irq = 20, base_baud = 15625000) is a 16550A console [ttyS0] enabled d0012100.serial: ttyS1 at MMIO 0xd0012100 (irq = 21, base_baud = 15625000) is a 16550A sata_mv d00a0000.sata: version 1.28 sata_mv d00a0000.sata: error getting phy Unable to handle kernel NULL pointer dereference at virtual address 00000054 pgd = c0004000 [00000054] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.14.0-rc1-00015-gf8f2023 #1 task: ee82ab80 ti: ee83c000 task.ti: ee83c000 PC is at __clk_put+0x1c/0x8c LR is at clk_prepare_lock+0x10/0xfc pc : [<c02c9148>] lr : [<c02c67f4>] psr: 60000113 sp : ee83de08 ip : 00000000 fp : ee807900 r10: ee320290 r9 : ee90b200 r8 : ffffffda r7 : ee90b210 r6 : 00000000 r5 : eebefed0 r4 : 00000000 r3 : ee82ab80 r2 : ee82ab80 r1 : ee83ddf8 r0 : 00000054 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 0000406a DAC: 00000015 Process swapper/0 (pid: 1, stack limit = 0xee83c240) Stack: (0xee83de08 to 0xee83e000) de00: 00000001 c01ff65c ee910e10 c00ff7b4 c04e183c 0000001f de20: ee910e10 00000002 c03c2d80 00000000 74726f70 ee910030 00000001 ee32fca8 de40: 00000086 ee90b210 c0519090 00000000 c0519090 c04e183c 00000086 ee83c030 de60: 00000000 c01c9958 c01c9940 c0551d48 ee90b210 c01c80e0 00000007 ee90b210 de80: c0519090 ee90b244 00000000 c01c8360 00000000 c0519090 c01c82c8 c01c67d8 dea0: ee85a7dc ee85e1b4 c0519090 ee320300 c05180c0 c01c7988 c046b580 c052edc0 dec0: c0519090 c0519090 00000006 c052edc0 c052edc0 c01c89a4 00000000 c04f6464 dee0: 00000006 c04e186c c04f6464 c00088bc ee804c80 c044e404 ee85ee00 c03ac4f8 df00: 00000000 c052edc0 0000d50c c00f6020 00000000 c0507b80 60000113 00000001 df20: ef7fce1b c03bc820 00000086 c0035e20 c04abd54 00000006 ef7fce26 00000006 df40: c0507b70 c04f6464 00000006 c052edc0 c052edc0 c04cd50c 00000086 c04efb14 df60: c04efb08 c04cdc40 00000006 00000006 c04cd50c d456f45d 0fbbed6f 47affddf df80: f9ff7bce 00000000 c03a05b4 00000000 00000000 00000000 00000000 00000000 dfa0: 00000000 c03a05bc 00000000 c000e298 00000000 00000000 00000000 00000000 dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 9757fff3 dd7dfd3f [<c02c9148>] (__clk_put) from [<c01ff65c>] (mv_platform_probe+0x2ac/0x414) [<c01ff65c>] (mv_platform_probe) from [<c01c9958>] (platform_drv_probe+0x18/0x48) [<c01c9958>] (platform_drv_probe) from [<c01c80e0>] (really_probe+0x80/0x214) [<c01c80e0>] (really_probe) from [<c01c8360>] (__driver_attach+0x98/0x9c) [<c01c8360>] (__driver_attach) from [<c01c67d8>] (bus_for_each_dev+0x60/0x94) [<c01c67d8>] (bus_for_each_dev) from [<c01c7988>] (bus_add_driver+0x148/0x1f0) [<c01c7988>] (bus_add_driver) from [<c01c89a4>] (driver_register+0x78/0xf8) [<c01c89a4>] (driver_register) from [<c04e186c>] (mv_init+0x30/0x50) [<c04e186c>] (mv_init) from [<c00088bc>] (do_one_initcall+0xf8/0x144) [<c00088bc>] (do_one_initcall) from [<c04cdc40>] (kernel_init_freeable+0x138/0x1d8) [<c04cdc40>] (kernel_init_freeable) from [<c03a05bc>] (kernel_init+0x8/0xf0) [<c03a05bc>] (kernel_init) from [<c000e298>] (ret_from_fork+0x14/0x3c) Code: 8a000012 ebfff5a8 e2840054 f57ff05b (e1903f9f) ---[ end trace 1dcbdf1437771127 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
CPU1: stopping CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.14.0-rc1-00015-gf8f2023 #1 [<c0014844>] (unwind_backtrace) from [<c00110f4>] (show_stack+0x10/0x14) [<c00110f4>] (show_stack) from [<c03a4db4>] (dump_stack+0x80/0x90) [<c03a4db4>] (dump_stack) from [<c0013c04>] (handle_IPI+0x148/0x170) [<c0013c04>] (handle_IPI) from [<c00085ac>] (armada_370_xp_handle_irq+0xac/0xb0) [<c00085ac>] (armada_370_xp_handle_irq) from [<c0011c20>] (__irq_svc+0x40/0x50) Exception stack(0xee877fa0 to 0xee877fe8) 7fa0: eefe65b8 00000000 00000934 00000000 ee876000 c05024ac c03ab9cc ee876000 7fc0: c052ec76 00000001 c052ec76 ee876000 00000000 ee877fe8 c000ee0c c0055754 7fe0: 60000113 ffffffff [<c0011c20>] (__irq_svc) from [<c0055754>] (cpu_startup_entry+0xf4/0x134) [<c0055754>] (cpu_startup_entry) from [<00008644>] (0x8644) ~$off # PYBOOT: Exception: kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000054
# PYBOOT: Time: 20.38 seconds. # PYBOOT: Result: FAIL
kernel-build-reports@lists.linaro.org
-
Kevin's boot bot