Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.2-6764-g02cf1da/
Failed boards:
cubie arm-sunxi_defconfig : FAILED 1:44.77 cubie arm-multi_v7_defconfig : FAILED 1:55.75 cubie2 arm-sunxi_defconfig : FAILED 1:45.30 cubie2 arm-multi_v7_defconfig : FAILED 1:53.96 cubie2 arm-multi_lpae_defconfig : FAILED 1:46.70 minnowmax x86-minnowmax_defconfig : FAILED 0:50.88
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 2:11.12 arndale arm-exynos_defconfig : passed 1:31.12 arndale arm-multi_v7_defconfig : passed 1:38.59 arndale arm-multi_lpae_defconfig : passed 1:37.57 bbb arm-omap2plus_defconfig : passed 1:47.57 bbb arm-multi_v7_defconfig : passed 1:28.29 capri arm-bcm_defconfig : passed 0:58.74 capri arm-multi_v7_defconfig : passed 0:50.84 chitra powerpc-pasemi_defconfig : passed 2:01.32 chitra powerpc-ppc64_defconfig : passed 3:02.17 colombus arm-sunxi_defconfig : passed 0:59.79 colombus arm-multi_v7_defconfig : passed 1:20.96 colombus arm-multi_lpae_defconfig : passed 1:14.02 cosmic arm-imx_v6_v7_defconfig : passed 3:10.67 cosmic arm-multi_v7_defconfig : passed 2:44.26 dalmore arm-tegra_defconfig : passed 1:23.33 dalmore arm-multi_lpae_defconfig : passed 1:37.27 hummingboard arm-imx_v6_v7_defconfig : warnings 1:37.54 hummingboard arm-multi_v7_defconfig : passed 1:16.78 jetsontk1 arm-tegra_defconfig : passed 0:48.49 jetsontk1 arm-multi_v7_defconfig : passed 0:48.68 jetsontk1 arm-multi_lpae_defconfig : passed 0:54.26 omap5uevm arm-omap2plus_defconfig : passed 1:05.68 omap5uevm arm-multi_v7_defconfig : passed 1:48.28 omap5uevm arm-multi_lpae_defconfig : passed 2:08.92 pandaes arm-omap2plus_defconfig : passed 1:37.93 pandaes arm-multi_v7_defconfig : passed 2:00.47 pi arm-exynos_defconfig : passed 1:34.51 pit arm-exynos_defconfig : passed 1:34.88 snow arm-exynos_defconfig : passed 1:11.60 snow arm-multi_v7_defconfig : passed 0:58.32 snow arm-multi_lpae_defconfig : passed 1:01.17 snowball arm-u8500_defconfig : warnings 3:13.23 snowball arm-multi_v7_defconfig : passed 2:17.14 socfpga arm-socfpga_defconfig : passed 1:43.87 socfpga arm-multi_v7_defconfig : passed 2:01.63 trimslice arm-tegra_defconfig : passed 1:34.67 trimslice arm-multi_v7_defconfig : passed 1:35.72 wandboard arm-imx_v6_v7_defconfig : warnings 1:41.12 wandboard arm-multi_v7_defconfig : passed 1:49.56
Offline boards:
beaver arm-tegra_defconfig : OFFLINE 1:25.04 beaver arm-multi_v7_defconfig : OFFLINE 1:30.35 cubox arm-multi_v7_defconfig : OFFLINE 2:01.69 cubox arm-mvebu_v7_defconfig : OFFLINE 2:20.59 dalmore arm-multi_v7_defconfig : OFFLINE 0:58.20 odroidu3 arm-exynos_defconfig : OFFLINE 1:35.39 parallella arm-multi_v7_defconfig : OFFLINE 1:30.12 pi arm-multi_v7_defconfig : OFFLINE 0:34.66 pi arm-multi_lpae_defconfig : OFFLINE 0:41.66 pit arm-multi_v7_defconfig : OFFLINE 0:32.02 pit arm-multi_lpae_defconfig : OFFLINE 0:40.74 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:49.34 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:56.87 sama5 arm-sama5_defconfig : OFFLINE 1:26.76 seaboard arm-tegra_defconfig : OFFLINE 1:26.68 seaboard arm-multi_v7_defconfig : OFFLINE 1:25.91
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board cubie-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.447768] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.455747] ohci-platform 1c14400.usb: irq 23, io mem 0x01c14400 [ 1.519652] hub 3-0:1.0: USB hub found [ 1.523513] hub 3-0:1.0: 1 port detected [ 1.529149] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.535888] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.544968] ohci-platform 1c1c400.usb: irq 27, io mem 0x01c1c400 [ 1.609646] hub 4-0:1.0: USB hub found [ 1.613494] hub 4-0:1.0: 1 port detected [ 1.618649] sunxi-rtc 1c20d00.rtc: setting system clock to 2010-01-01 00:00:15 UTC (1262304015) [ 1.679761] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.689493] ata1.00: ATA-8: SanDisk SSD P4 32GB, SSD CS01, max UDMA/133 [ 1.696134] ata1.00: 62533296 sectors, multi 1: LBA48 [ 1.701819] ata1.00: configured for UDMA/133 [ 1.706624] scsi 0:0:0:0: Direct-Access ATA SanDisk SSD P4 3 CS01 PQ: 0 ANSI: 5 [ 1.716129] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 1.724069] sd 0:0:0:0: [sda] Write Protect is off [ 1.729034] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.742408] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.754820] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3.834768] sun4i-emac 1c0b000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 3.843100] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 3.854863] Sending DHCP requests ..., OK [ 11.495222] IP-Config: Got DHCP answer from 172.16.20.1, my address is 172.16.20.101 [ 11.503323] IP-Config: Complete: [ 11.506608] device=eth0, hwaddr=08:00:08:1e:2f:44, ipaddr=172.16.20.101, mask=255.255.255.0, gw=172.16.20.1 [ 11.516797] host=172.16.20.101, domain=, nis-domain=(none) [ 11.522735] bootserver=0.0.0.0, rootserver=172.16.20.2, rootpath= [ 11.529115] nameserver0=172.16.20.1 [ 11.533300] vcc3v0: disabling [ 11.536298] vcc5v0: disabling [ 11.539277] ldo3: disabling [ 11.542301] ldo4: disabling
[PYBOOT] [cubie 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cubie 01:52]: got exception: timeout ~$off
[PYBOOT] [cubie 01:54]: Done.
========================================================================
Board cubie-arm-sunxi_defconfig failure log: -------------------------------------------------
[ 1.157291] hub 2-0:1.0: 1 port detected [ 1.161809] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.168490] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.176340] ohci-platform 1c14400.usb: irq 23, io mem 0x01c14400 [ 1.241356] hub 3-0:1.0: USB hub found [ 1.245141] hub 3-0:1.0: 1 port detected [ 1.249729] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.256362] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.264273] ohci-platform 1c1c400.usb: irq 27, io mem 0x01c1c400 [ 1.331372] hub 4-0:1.0: USB hub found [ 1.335156] hub 4-0:1.0: 1 port detected [ 1.339535] sunxi-rtc 1c20d00.rtc: setting system clock to 2010-01-01 00:00:14 UTC (1262304014) [ 1.426617] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.436385] ata1.00: ATA-8: SanDisk SSD P4 32GB, SSD CS01, max UDMA/133 [ 1.443032] ata1.00: 62533296 sectors, multi 1: LBA48 [ 1.448775] ata1.00: configured for UDMA/133 [ 1.453518] scsi 0:0:0:0: Direct-Access ATA SanDisk SSD P4 3 CS01 PQ: 0 ANSI: 5 [ 1.462839] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 1.470791] sd 0:0:0:0: [sda] Write Protect is off [ 1.475680] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.488003] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.686611] sun4i-emac 1c0b000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 3.706600] Sending DHCP requests ..., OK [ 11.777058] IP-Config: Got DHCP answer from 172.16.20.1, my address is 172.16.20.101 [ 11.785015] IP-Config: Complete: [ 11.788287] device=eth0, hwaddr=08:00:08:1e:2f:44, ipaddr=172.16.20.101, mask=255.255.255.0, gw=172.16.20.1 [ 11.798465] host=172.16.20.101, domain=, nis-domain=(none) [ 11.804376] bootserver=0.0.0.0, rootserver=172.16.20.2, rootpath= [ 11.810734] nameserver0=172.16.20.1 [ 11.814866] vcc3v0: disabling [ 11.817846] vcc5v0: disabling [ 11.820823] ldo3: disabling [ 11.823800] ldo4: disabling
[PYBOOT] [cubie 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cubie 01:42]: got exception: timeout ~$off
[PYBOOT] [cubie 01:44]: Done.
========================================================================
Board cubie2-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.556141] hub 3-0:1.0: USB hub found [ 1.559978] hub 3-0:1.0: 1 port detected [ 1.566112] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.572817] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.581539] ohci-platform 1c1c400.usb: irq 32, io mem 0x01c1c400 [ 1.646069] hub 4-0:1.0: USB hub found [ 1.649896] hub 4-0:1.0: 1 port detected [ 1.655361] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:17 UTC (17) [ 1.725898] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.743080] RX IPC Checksum Offload disabled [ 1.747468] No MAC Management Counters available [ 1.755503] ata1.00: ATA-8: SanDisk pSSD-S2 8GB, SSD 6.00, max UDMA/133 [ 1.762280] ata1.00: 15649200 sectors, multi 0: LBA48 [ 1.767497] Sending DHCP requests . [ 1.775368] ata1.00: configured for UDMA/133 [ 1.786202] scsi 0:0:0:0: Direct-Access ATA SanDisk pSSD-S2 6.00 PQ: 0 ANSI: 5 [ 1.796557] sd 0:0:0:0: [sda] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 1.804954] sd 0:0:0:0: [sda] Write Protect is off [ 1.810050] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.831091] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 [ 1.843798] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.731170] sun7i-dwmac 1c50000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 4.075888] .., OK [ 8.116410] IP-Config: Got DHCP answer from 172.16.20.1, my address is 172.16.20.104 [ 8.124771] IP-Config: Complete: [ 8.128105] device=eth0, hwaddr=08:00:08:1e:2f:64, ipaddr=172.16.20.104, mask=255.255.255.0, gw=172.16.20.1 [ 8.138325] host=172.16.20.104, domain=, nis-domain=(none) [ 8.144293] bootserver=0.0.0.0, rootserver=172.16.20.2, rootpath= [ 8.150688] nameserver0=172.16.20.1 [ 8.154925] vcc3v0: disabling [ 8.157954] vcc5v0: disabling [ 8.160989] ldo3: disabling [ 8.164091] ldo4: disabling
[PYBOOT] [cubie2 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cubie2 01:44]: got exception: timeout ~$off
[PYBOOT] [cubie2 01:46]: Done.
========================================================================
Board cubie2-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.556081] hub 3-0:1.0: USB hub found [ 1.559940] hub 3-0:1.0: 1 port detected [ 1.566086] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.572791] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.581551] ohci-platform 1c1c400.usb: irq 32, io mem 0x01c1c400 [ 1.646055] hub 4-0:1.0: USB hub found [ 1.649887] hub 4-0:1.0: 1 port detected [ 1.655349] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:15 UTC (15) [ 1.725883] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.743067] RX IPC Checksum Offload disabled [ 1.747452] No MAC Management Counters available [ 1.755479] ata1.00: ATA-8: SanDisk pSSD-S2 8GB, SSD 6.00, max UDMA/133 [ 1.762253] ata1.00: 15649200 sectors, multi 0: LBA48 [ 1.767470] Sending DHCP requests . [ 1.775328] ata1.00: configured for UDMA/133 [ 1.786145] scsi 0:0:0:0: Direct-Access ATA SanDisk pSSD-S2 6.00 PQ: 0 ANSI: 5 [ 1.796462] sd 0:0:0:0: [sda] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 1.804716] sd 0:0:0:0: [sda] Write Protect is off [ 1.809950] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.831059] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 [ 1.843775] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.731157] sun7i-dwmac 1c50000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 4.055871] .., OK [ 8.061400] IP-Config: Got DHCP answer from 172.16.20.1, my address is 172.16.20.104 [ 8.069763] IP-Config: Complete: [ 8.073099] device=eth0, hwaddr=08:00:08:1e:2f:64, ipaddr=172.16.20.104, mask=255.255.255.0, gw=172.16.20.1 [ 8.083318] host=172.16.20.104, domain=, nis-domain=(none) [ 8.089284] bootserver=0.0.0.0, rootserver=172.16.20.2, rootpath= [ 8.095679] nameserver0=172.16.20.1 [ 8.099915] vcc3v0: disabling [ 8.102941] vcc5v0: disabling [ 8.105971] ldo3: disabling [ 8.109024] ldo4: disabling
[PYBOOT] [cubie2 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cubie2 01:52]: got exception: timeout ~$off
[PYBOOT] [cubie2 01:53]: Done.
========================================================================
Board cubie2-arm-sunxi_defconfig failure log: -------------------------------------------------
[ 1.253481] hub 3-0:1.0: USB hub found [ 1.257277] hub 3-0:1.0: 1 port detected [ 1.261939] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.268578] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.276515] ohci-platform 1c1c400.usb: irq 32, io mem 0x01c1c400 [ 1.343482] hub 4-0:1.0: USB hub found [ 1.347272] hub 4-0:1.0: 1 port detected [ 1.351695] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.438642] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.455563] RX IPC Checksum Offload disabled [ 1.459950] No MAC Management Counters available [ 1.467625] ata1.00: ATA-8: SanDisk pSSD-S2 8GB, SSD 6.00, max UDMA/133 [ 1.474279] ata1.00: 15649200 sectors, multi 0: LBA48 [ 1.479465] Sending DHCP requests . [ 1.487887] ata1.00: configured for UDMA/133 [ 1.492943] scsi 0:0:0:0: Direct-Access ATA SanDisk pSSD-S2 6.00 PQ: 0 ANSI: 5 [ 1.502396] sd 0:0:0:0: [sda] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 1.510411] sd 0:0:0:0: [sda] Write Protect is off [ 1.515307] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.535450] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 [ 1.545877] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.438844] sun7i-dwmac 1c50000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 3.598598] ..., OK [ 13.819074] IP-Config: Got DHCP answer from 172.16.20.1, my address is 172.16.20.104 [ 13.827081] IP-Config: Complete: [ 13.830357] device=eth0, hwaddr=08:00:08:1e:2f:64, ipaddr=172.16.20.104, mask=255.255.255.0, gw=172.16.20.1 [ 13.840533] host=172.16.20.104, domain=, nis-domain=(none) [ 13.846445] bootserver=0.0.0.0, rootserver=172.16.20.2, rootpath= [ 13.852802] nameserver0=172.16.20.1 [ 13.856941] vcc3v0: disabling [ 13.859918] vcc5v0: disabling [ 13.862893] ldo3: disabling [ 13.865871] ldo4: disabling
[PYBOOT] [cubie2 01:39]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cubie2 01:40]: got exception: timeout ~$off
[PYBOOT] [cubie2 01:41]: Done.
========================================================================
Board minnowmax-x86-minnowmax_defconfig failure log: -------------------------------------------------
Connected to minnowmax console [channel connected] (~$quit to exit)~$open
~$hardreset
Command(minnowmax console)> open console already open
Command(minnowmax console)> hardreset (user:build) Reset target node minnowmax status: off node minnowmax status: on
[PYBOOT] [minnowmax 00:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [minnowmax 00:49]: got exception: timeout ~$off
[PYBOOT] [minnowmax 00:50]: Done.
kernel-build-reports@lists.linaro.org
-
Olof's autobooter