Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20150721/
Failed boards:
colombus arm-sunxi_defconfig : FAILED 1:57.58 colombus arm-multi_v7_defconfig : FAILED 2:00.28 colombus arm-multi_lpae_defconfig : FAILED 2:00.08 cubie arm-sunxi_defconfig : FAILED 1:45.74 cubie arm-multi_v7_defconfig : FAILED 2:13.10 cubie2 arm-sunxi_defconfig : FAILED 1:44.05 cubie2 arm-multi_v7_defconfig : FAILED 2:06.52 cubie2 arm-multi_lpae_defconfig : FAILED 1:41.79 hummingboard arm-imx_v6_v7_defconfig : FAILED 2:17.28 hummingboard arm-multi_v7_defconfig : FAILED 1:45.90 minnowmax x86-minnowmax_defconfig : FAILED 0:56.44 pi arm-exynos_defconfig : FAILED 1:49.38 pit arm-exynos_defconfig : FAILED 1:54.58 socfpga arm-multi_v7_defconfig : FAILED 2:13.16 wandboard arm-imx_v6_v7_defconfig : FAILED 1:45.10 wandboard arm-multi_v7_defconfig : FAILED 2:03.66
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:15.47 arndale arm-exynos_defconfig : passed 1:29.64 arndale arm-multi_v7_defconfig : passed 1:37.32 arndale arm-multi_lpae_defconfig : passed 1:28.14 bbb arm-omap2plus_defconfig : passed 1:43.94 bbb arm-multi_v7_defconfig : passed 1:21.50 capri arm-bcm_defconfig : passed 0:59.75 capri arm-multi_v7_defconfig : passed 0:51.43 chitra powerpc-pasemi_defconfig : passed 2:02.88 chitra powerpc-ppc64_defconfig : warnings 1:55.69 cosmic arm-imx_v6_v7_defconfig : passed 2:11.18 cosmic arm-multi_v7_defconfig : passed 1:37.31 cubox arm-multi_v7_defconfig : passed 1:15.07 cubox arm-mvebu_v7_defconfig : passed 1:17.61 dalmore arm-multi_v7_defconfig : passed 1:36.18 dalmore arm-multi_lpae_defconfig : passed 1:21.38 jetsontk1 arm-tegra_defconfig : passed 0:57.93 jetsontk1 arm-multi_v7_defconfig : passed 0:58.66 jetsontk1 arm-multi_lpae_defconfig : passed 1:02.15 odroidu3 arm-exynos_defconfig : passed 2:27.07 omap5uevm arm-omap2plus_defconfig : passed 1:07.70 omap5uevm arm-multi_v7_defconfig : passed 1:10.55 omap5uevm arm-multi_lpae_defconfig : passed 1:09.74 pandaes arm-omap2plus_defconfig : warnings 1:44.40 pandaes arm-multi_v7_defconfig : passed 1:42.18 rk3288evb arm-multi_v7_defconfig : passed 1:06.00 rk3288evb arm-multi_lpae_defconfig : passed 0:43.64 sama5 arm-sama5_defconfig : passed 1:30.77 seaboard arm-tegra_defconfig : passed 0:59.82 seaboard arm-multi_v7_defconfig : passed 1:21.62 snow arm-exynos_defconfig : passed 2:36.27 snow arm-multi_v7_defconfig : passed 0:56.14 snow arm-multi_lpae_defconfig : passed 1:33.97 snowball arm-u8500_defconfig : passed 2:21.25 snowball arm-multi_v7_defconfig : passed 3:56.13 socfpga arm-socfpga_defconfig : passed 1:03.35 trimslice arm-tegra_defconfig : passed 0:57.67 trimslice arm-multi_v7_defconfig : passed 1:08.29
Offline boards:
beaver arm-tegra_defconfig : OFFLINE 1:23.72 beaver arm-multi_v7_defconfig : OFFLINE 1:27.63 dalmore arm-tegra_defconfig : OFFLINE 1:53.62 parallella arm-multi_v7_defconfig : OFFLINE 1:28.80 pi arm-multi_v7_defconfig : OFFLINE 0:35.74 pi arm-multi_lpae_defconfig : OFFLINE 0:36.52 pit arm-multi_v7_defconfig : OFFLINE 0:31.23 pit arm-multi_lpae_defconfig : OFFLINE 0:42.79
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board colombus-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.565060] sunxi-mmc 1c0f000.mmc: base:0xf009a000 irq:28 [ 1.570572] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.577342] ledtrig-cpu: registered to indicate activity on CPUs [ 1.583578] usbcore: registered new interface driver usbhid [ 1.589155] usbhid: USB HID core driver [ 1.596853] NET: Registered protocol family 10 [ 1.602253] sit: IPv6 over IPv4 tunneling driver [ 1.607566] NET: Registered protocol family 17 [ 1.612040] can: controller area network core (rev 20120528 abi 9) [ 1.618282] NET: Registered protocol family 29 [ 1.622737] can: raw protocol (rev 20120528) [ 1.627019] can: broadcast manager protocol (rev 20120528 t) [ 1.632701] can: netlink gateway (rev 20130117) max_hops=1 [ 1.638618] Key type dns_resolver registered [ 1.643812] cpufreq: cpufreq_add_dev: ->get() failed [ 1.648920] cpu cpu1: failed to get cpu1 clock: -2 [ 1.653715] cpufreq_dt: cpufreq_init: Failed to allocate resources: -2 [ 1.660321] cpu cpu2: failed to get cpu2 clock: -2 [ 1.665115] cpufreq_dt: cpufreq_init: Failed to allocate resources: -2 [ 1.671717] cpu cpu3: failed to get cpu3 clock: -2 [ 1.676513] cpufreq_dt: cpufreq_init: Failed to allocate resources: -2 [ 1.683084] ThumbEE CPU extension supported. [ 1.687376] Registering SWP/SWPB emulation handler [ 1.696275] sun6i-a31-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver [ 1.704445] ehci-platform 1c1b000.usb: EHCI Host Controller [ 1.710058] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 1 [ 1.718066] ehci-platform 1c1b000.usb: irq 29, io mem 0x01c1b000 [ 1.729941] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00 [ 1.736882] hub 1-0:1.0: USB hub found [ 1.740676] hub 1-0:1.0: 1 port detected [ 1.745601] sun6i-rtc 1f00000.rtc: setting system clock to 1970-01-01 00:00:25 UTC (25) [ 1.757499] vcc5v0: disabling [ 1.760509] vcc3v3: disabling
[PYBOOT] [colombus 01:57]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 01:58]: got exception: timeout ~$off
[PYBOOT] [colombus 01:59]: Done.
========================================================================
Board colombus-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.565063] sunxi-mmc 1c0f000.mmc: base:0xf009a000 irq:28 [ 1.570580] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.577331] ledtrig-cpu: registered to indicate activity on CPUs [ 1.583594] usbcore: registered new interface driver usbhid [ 1.589172] usbhid: USB HID core driver [ 1.596843] NET: Registered protocol family 10 [ 1.602263] sit: IPv6 over IPv4 tunneling driver [ 1.607580] NET: Registered protocol family 17 [ 1.612056] can: controller area network core (rev 20120528 abi 9) [ 1.618299] NET: Registered protocol family 29 [ 1.622757] can: raw protocol (rev 20120528) [ 1.627042] can: broadcast manager protocol (rev 20120528 t) [ 1.632714] can: netlink gateway (rev 20130117) max_hops=1 [ 1.638644] Key type dns_resolver registered [ 1.643850] cpufreq: cpufreq_add_dev: ->get() failed [ 1.648963] cpu cpu1: failed to get cpu1 clock: -2 [ 1.653759] cpufreq_dt: cpufreq_init: Failed to allocate resources: -2 [ 1.660366] cpu cpu2: failed to get cpu2 clock: -2 [ 1.665160] cpufreq_dt: cpufreq_init: Failed to allocate resources: -2 [ 1.671760] cpu cpu3: failed to get cpu3 clock: -2 [ 1.676556] cpufreq_dt: cpufreq_init: Failed to allocate resources: -2 [ 1.683126] ThumbEE CPU extension supported. [ 1.687418] Registering SWP/SWPB emulation handler [ 1.696344] sun6i-a31-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver [ 1.704512] ehci-platform 1c1b000.usb: EHCI Host Controller [ 1.710128] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 1 [ 1.718117] ehci-platform 1c1b000.usb: irq 29, io mem 0x01c1b000 [ 1.729938] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00 [ 1.736883] hub 1-0:1.0: USB hub found [ 1.740679] hub 1-0:1.0: 1 port detected [ 1.745613] sun6i-rtc 1f00000.rtc: setting system clock to 1970-01-01 00:00:25 UTC (25) [ 1.757519] vcc5v0: disabling [ 1.760530] vcc3v3: disabling
[PYBOOT] [colombus 01:57]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 01:58]: got exception: timeout ~$off
[PYBOOT] [colombus 01:59]: Done.
========================================================================
Board colombus-arm-sunxi_defconfig failure log: -------------------------------------------------
[ 1.143682] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.150241] ehci-platform: EHCI generic platform driver [ 1.155676] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.161883] ohci-platform: OHCI generic platform driver [ 1.168021] sun6i-rtc 1f00000.rtc: rtc core: registered rtc-sun6i as rtc0 [ 1.174820] sun6i-rtc 1f00000.rtc: RTC enabled [ 1.179427] i2c /dev entries driver [ 1.184313] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 1.192682] sunxi-mmc 1c0f000.mmc: No vqmmc regulator found [ 1.198540] sunxi-mmc 1c0f000.mmc: Got CD GPIO [ 1.239681] sunxi-mmc 1c0f000.mmc: base:0xf009a000 irq:28 [ 1.245863] usbcore: registered new interface driver usbhid [ 1.251449] usbhid: USB HID core driver [ 1.256531] NET: Registered protocol family 17 [ 1.261146] Key type dns_resolver registered [ 1.265789] cpufreq: cpufreq_add_dev: ->get() failed [ 1.270882] cpu cpu1: failed to get cpu1 clock: -2 [ 1.275666] cpufreq_dt: cpufreq_init: Failed to allocate resources: -2 [ 1.282269] cpu cpu2: failed to get cpu2 clock: -2 [ 1.287044] cpufreq_dt: cpufreq_init: Failed to allocate resources: -2 [ 1.293645] cpu cpu3: failed to get cpu3 clock: -2 [ 1.298428] cpufreq_dt: cpufreq_init: Failed to allocate resources: -2 [ 1.305009] Registering SWP/SWPB emulation handler [ 1.312235] sun6i-a31-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver [ 1.319604] ehci-platform 1c1b000.usb: EHCI Host Controller [ 1.325197] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 1 [ 1.333078] ehci-platform 1c1b000.usb: irq 29, io mem 0x01c1b000 [ 1.349575] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00 [ 1.356473] hub 1-0:1.0: USB hub found [ 1.360264] hub 1-0:1.0: 1 port detected [ 1.364593] sun6i-rtc 1f00000.rtc: setting system clock to 1970-01-01 00:00:17 UTC (17) [ 1.376257] vcc5v0: disabling [ 1.379235] vcc3v3: disabling
[PYBOOT] [colombus 01:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [colombus 01:55]: got exception: timeout ~$off
[PYBOOT] [colombus 01:57]: Done.
========================================================================
Board cubie-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.389011] hub 1-0:1.0: 1 port detected [ 1.394488] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.400167] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.408161] ehci-platform 1c1c000.usb: irq 26, io mem 0x01c1c000 [ 1.423245] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.430183] hub 2-0:1.0: USB hub found [ 1.434021] hub 2-0:1.0: 1 port detected [ 1.439497] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.446194] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.454179] ohci-platform 1c14400.usb: irq 23, io mem 0x01c14400 [ 1.518021] hub 3-0:1.0: USB hub found [ 1.521864] hub 3-0:1.0: 1 port detected [ 1.527344] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.534073] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.542380] ohci-platform 1c1c400.usb: irq 27, io mem 0x01c1c400 [ 1.608018] hub 4-0:1.0: USB hub found [ 1.611858] hub 4-0:1.0: 1 port detected [ 1.616884] sunxi-rtc 1c20d00.rtc: setting system clock to 2010-01-01 00:00:19 UTC (1262304019) [ 1.678247] ata1: SATA link down (SStatus 0 SControl 300) [ 1.743282] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 3.823236] sun4i-emac 1c0b000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 3.831533] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 3.843317] Sending DHCP requests ..., OK [ 10.383689] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.101 [ 10.391489] IP-Config: Complete: [ 10.394748] device=eth0, hwaddr=08:00:08:1e:2f:44, ipaddr=172.16.1.101, mask=255.255.255.0, gw=172.16.1.1 [ 10.404749] host=172.16.1.101, domain=lixom.net, nis-domain=(none) [ 10.411366] bootserver=172.16.1.1, rootserver=172.16.1.7, rootpath= [ 10.417895] nameserver0=75.75.75.75, nameserver1=76.76.76.76, nameserver2=8.8.8.8 [ 10.426329] ldo4: disabling [ 10.429322] ldo3: disabling [ 10.432281] vcc5v0: disabling [ 10.435286] vcc3v0: disabling
[PYBOOT] [cubie 02:10]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cubie 02:11]: got exception: timeout ~$off
[PYBOOT] [cubie 02:12]: Done.
========================================================================
Board cubie-arm-sunxi_defconfig failure log: -------------------------------------------------
[ 1.085238] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00 [ 1.092148] hub 1-0:1.0: USB hub found [ 1.095992] hub 1-0:1.0: 1 port detected [ 1.100500] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.106137] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.113996] ehci-platform 1c1c000.usb: irq 26, io mem 0x01c1c000 [ 1.135220] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.142068] hub 2-0:1.0: USB hub found [ 1.145896] hub 2-0:1.0: 1 port detected [ 1.150400] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.157081] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.164928] ohci-platform 1c14400.usb: irq 23, io mem 0x01c14400 [ 1.229964] hub 3-0:1.0: USB hub found [ 1.233745] hub 3-0:1.0: 1 port detected [ 1.238298] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.244930] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.252832] ohci-platform 1c1c400.usb: irq 27, io mem 0x01c1c400 [ 1.319984] hub 4-0:1.0: USB hub found [ 1.323767] hub 4-0:1.0: 1 port detected [ 1.328158] sunxi-rtc 1c20d00.rtc: setting system clock to 2010-01-01 00:00:16 UTC (1262304016) [ 1.415237] ata1: SATA link down (SStatus 0 SControl 300) [ 3.675234] sun4i-emac 1c0b000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 3.695222] Sending DHCP requests ..., OK [ 9.895686] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.101 [ 9.903451] IP-Config: Complete: [ 9.906721] device=eth0, hwaddr=08:00:08:1e:2f:44, ipaddr=172.16.1.101, mask=255.255.255.0, gw=172.16.1.1 [ 9.916730] host=172.16.1.101, domain=lixom.net, nis-domain=(none) [ 9.923335] bootserver=172.16.1.1, rootserver=172.16.1.7, rootpath= [ 9.929865] nameserver0=75.75.75.75, nameserver1=76.76.76.76, nameserver2=8.8.8.8 [ 9.938269] ldo4: disabling [ 9.941232] ldo3: disabling [ 9.944184] vcc5v0: disabling [ 9.947184] vcc3v0: disabling
[PYBOOT] [cubie 01:42]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cubie 01:43]: got exception: timeout ~$off
[PYBOOT] [cubie 01:44]: Done.
========================================================================
Board cubie2-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.441360] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.447035] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.455115] ehci-platform 1c1c000.usb: irq 31, io mem 0x01c1c000 [ 1.469862] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.476936] hub 2-0:1.0: USB hub found [ 1.480788] hub 2-0:1.0: 1 port detected [ 1.486420] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.493153] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.501151] ohci-platform 1c14400.usb: irq 28, io mem 0x01c14400 [ 1.564768] hub 3-0:1.0: USB hub found [ 1.568637] hub 3-0:1.0: 1 port detected [ 1.574266] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.581002] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.589373] ohci-platform 1c1c400.usb: irq 32, io mem 0x01c1c400 [ 1.654764] hub 4-0:1.0: USB hub found [ 1.658619] hub 4-0:1.0: 1 port detected [ 1.663796] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:14 UTC (14) [ 1.724878] ata1: SATA link down (SStatus 0 SControl 300) [ 1.750615] RX IPC Checksum Offload disabled [ 1.754994] No MAC Management Counters available [ 1.774872] Sending DHCP requests . [ 3.740091] sun7i-dwmac 1c50000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 4.369836] .., OK [ 8.920315] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.77 [ 8.928053] IP-Config: Complete: [ 8.931316] device=eth0, hwaddr=08:00:08:1e:2f:64, ipaddr=172.16.1.77, mask=255.255.255.0, gw=172.16.1.1 [ 8.941229] host=172.16.1.77, domain=lixom.net, nis-domain=(none) [ 8.947759] bootserver=172.16.1.1, rootserver=172.16.1.7, rootpath= [ 8.954290] nameserver0=75.75.75.75, nameserver1=76.76.76.76, nameserver2=8.8.8.8 [ 8.962728] ldo4: disabling [ 8.965728] ldo3: disabling [ 8.968687] vcc5v0: disabling [ 8.971674] vcc3v0: disabling
[PYBOOT] [cubie2 01:38]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cubie2 01:39]: got exception: timeout ~$off
[PYBOOT] [cubie2 01:40]: Done.
========================================================================
Board cubie2-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.441479] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.447153] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.455227] ehci-platform 1c1c000.usb: irq 31, io mem 0x01c1c000 [ 1.469964] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.477031] hub 2-0:1.0: USB hub found [ 1.480890] hub 2-0:1.0: 1 port detected [ 1.486529] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.493262] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.501257] ohci-platform 1c14400.usb: irq 28, io mem 0x01c14400 [ 1.564876] hub 3-0:1.0: USB hub found [ 1.568739] hub 3-0:1.0: 1 port detected [ 1.574360] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.581094] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.589483] ohci-platform 1c1c400.usb: irq 32, io mem 0x01c1c400 [ 1.654878] hub 4-0:1.0: USB hub found [ 1.658730] hub 4-0:1.0: 1 port detected [ 1.663904] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 00:00:26 UTC (26) [ 1.724976] ata1: SATA link down (SStatus 0 SControl 300) [ 1.750719] RX IPC Checksum Offload disabled [ 1.755099] No MAC Management Counters available [ 1.774973] Sending DHCP requests . [ 3.740189] sun7i-dwmac 1c50000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 4.009965] .., OK [ 8.370413] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.77 [ 8.378166] IP-Config: Complete: [ 8.381429] device=eth0, hwaddr=08:00:08:1e:2f:64, ipaddr=172.16.1.77, mask=255.255.255.0, gw=172.16.1.1 [ 8.391345] host=172.16.1.77, domain=lixom.net, nis-domain=(none) [ 8.397876] bootserver=172.16.1.1, rootserver=172.16.1.7, rootpath= [ 8.404405] nameserver0=75.75.75.75, nameserver1=76.76.76.76, nameserver2=8.8.8.8 [ 8.412892] ldo4: disabling [ 8.415888] ldo3: disabling [ 8.418843] vcc5v0: disabling [ 8.421834] vcc3v0: disabling
[PYBOOT] [cubie2 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cubie2 02:04]: got exception: timeout ~$off
[PYBOOT] [cubie2 02:05]: Done.
========================================================================
Board cubie2-arm-sunxi_defconfig failure log: -------------------------------------------------
[ 1.113648] ehci-platform 1c1c000.usb: EHCI Host Controller [ 1.119300] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2 [ 1.127176] ehci-platform 1c1c000.usb: irq 31, io mem 0x01c1c000 [ 1.148186] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00 [ 1.155101] hub 2-0:1.0: USB hub found [ 1.158947] hub 2-0:1.0: 1 port detected [ 1.163524] ohci-platform 1c14400.usb: Generic Platform OHCI controller [ 1.170224] ohci-platform 1c14400.usb: new USB bus registered, assigned bus number 3 [ 1.178086] ohci-platform 1c14400.usb: irq 28, io mem 0x01c14400 [ 1.243018] hub 3-0:1.0: USB hub found [ 1.246813] hub 3-0:1.0: 1 port detected [ 1.251454] ohci-platform 1c1c400.usb: Generic Platform OHCI controller [ 1.258101] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 4 [ 1.266043] ohci-platform 1c1c400.usb: irq 32, io mem 0x01c1c400 [ 1.333033] hub 4-0:1.0: USB hub found [ 1.336826] hub 4-0:1.0: 1 port detected [ 1.341252] sunxi-rtc 1c20d00.rtc: setting system clock to 1970-01-01 06:08:54 UTC (22134) [ 1.428199] ata1: SATA link down (SStatus 0 SControl 300) [ 1.444396] RX IPC Checksum Offload disabled [ 1.448776] No MAC Management Counters available [ 1.468211] Sending DHCP requests . [ 3.428409] sun7i-dwmac 1c50000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off [ 4.428162] .., OK [ 9.628635] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.77 [ 9.636356] IP-Config: Complete: [ 9.639623] device=eth0, hwaddr=08:00:08:1e:2f:64, ipaddr=172.16.1.77, mask=255.255.255.0, gw=172.16.1.1 [ 9.649537] host=172.16.1.77, domain=lixom.net, nis-domain=(none) [ 9.656055] bootserver=172.16.1.1, rootserver=172.16.1.7, rootpath= [ 9.662584] nameserver0=75.75.75.75, nameserver1=76.76.76.76, nameserver2=8.8.8.8 [ 9.670995] ldo4: disabling [ 9.673956] ldo3: disabling [ 9.676906] vcc5v0: disabling [ 9.679904] vcc3v0: disabling
[PYBOOT] [cubie2 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cubie2 01:42]: got exception: timeout ~$off
[PYBOOT] [cubie2 01:43]: Done.
========================================================================
Board hummingboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 2.948732] [<80a6b370>] (imx6q_init_late) from [<80a6185c>] (init_machine_late+0x24/0x94) [ 2.957026] r7:80a61838 r6:9dcbd380 r5:80acffe0 r4:80acffe0 [ 2.962807] [<80a61838>] (init_machine_late) from [<8000983c>] (do_one_initcall+0x88/0x1e4) [ 2.971184] r4:80acffe0 r3:00000000 [ 2.974814] [<800097b4>] (do_one_initcall) from [<80a5ee48>] (kernel_init_freeable+0x12c/0x1f4) [ 2.983540] r10:80a5e5ec r9:80ab5ba8 r8:80ab5ba4 r7:80b34000 r6:80ac3f50 r5:80b34000 [ 2.991492] r4:00000007 [ 2.994063] [<80a5ed1c>] (kernel_init_freeable) from [<807a7b34>] (kernel_init+0x10/0xf4) [ 3.002273] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:807a7b24 [ 3.010233] r4:00000000 [ 3.012803] [<807a7b24>] (kernel_init) from [<8000fbb8>] (ret_from_fork+0x14/0x3c) [ 3.020400] r4:00000000 r3:00000000 [ 3.024053] ---[ end trace bcd53f17c95c7543 ]--- [ 3.029269] Registering SWP/SWPB emulation handler [ 3.043138] fsl-asoc-card sound-sgtl5000: ASoC: CODEC DAI sgtl5000 not registered [ 3.050722] fsl-asoc-card sound-sgtl5000: snd_soc_register_card failed (-517) [ 3.060436] imx-sgtl5000 sound-sgtl5000: ASoC: CODEC DAI sgtl5000 not registered [ 3.067854] imx-sgtl5000 sound-sgtl5000: snd_soc_register_card failed (-517) [ 3.086128] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01 00:00:01 UTC (1) [ 3.322737] cfg80211: Calling CRDA to update world regulatory domain [ 3.331120] ALSA device list: [ 3.334108] #0: On-board SPDIF [ 3.339025] Waiting for root device /dev/mmcblk0p2... [ 6.480817] cfg80211: Calling CRDA to update world regulatory domain [ 9.640211] cfg80211: Calling CRDA to update world regulatory domain [ 12.800279] cfg80211: Calling CRDA to update world regulatory domain [ 15.960259] cfg80211: Calling CRDA to update world regulatory domain [ 19.120205] cfg80211: Calling CRDA to update world regulatory domain [ 22.280220] cfg80211: Calling CRDA to update world regulatory domain [ 25.440213] cfg80211: Calling CRDA to update world regulatory domain [ 28.600210] cfg80211: Calling CRDA to update world regulatory domain [ 31.760259] cfg80211: Calling CRDA to update world regulatory domain [ 34.920194] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA
[PYBOOT] [hummingboard 02:14]: Timed out waiting for "<type 'str'>":
[PYBOOT] [hummingboard 02:15]: got exception: timeout ~$off
[PYBOOT] [hummingboard 02:16]: Done.
========================================================================
Board hummingboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.213520] i2c /dev entries driver [ 1.225198] sdhci: Secure Digital Host Controller Interface driver [ 1.231416] sdhci: Copyright(c) Pierre Ossman [ 1.237524] Synopsys Designware Multimedia Card Interface Driver [ 1.244788] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.251247] /soc/aips-bus@02100000/usdhc@02190000: voltage-ranges unspecified [ 1.258535] ERROR: could not get clock /usdhc1_pwrseq:ext_clock(0) [ 1.264778] sdhci-esdhc-imx 2190000.usdhc: allocated mmc-pwrseq [ 1.270732] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode [ 1.281827] sdhci-esdhc-imx 2190000.usdhc: No vqmmc regulator found [ 1.528725] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 1.536450] /soc/aips-bus@02100000/usdhc@02194000: voltage-ranges unspecified [ 1.543647] sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO [ 1.548835] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 1.558191] sdhci-esdhc-imx 2194000.usdhc: No vqmmc regulator found [ 1.598799] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 1.610094] ledtrig-cpu: registered to indicate activity on CPUs [ 1.616388] usbcore: registered new interface driver usbhid [ 1.621996] usbhid: USB HID core driver [ 1.630723] NET: Registered protocol family 10 [ 1.638250] sit: IPv6 over IPv4 tunneling driver [ 1.643524] NET: Registered protocol family 17 [ 1.648024] can: controller area network core (rev 20120528 abi 9) [ 1.654288] NET: Registered protocol family 29 [ 1.658767] can: raw protocol (rev 20120528) [ 1.663050] can: broadcast manager protocol (rev 20120528 t) [ 1.668745] can: netlink gateway (rev 20130117) max_hops=1 [ 1.674682] Key type dns_resolver registered [ 1.679125] ThumbEE CPU extension supported. [ 1.683419] Registering SWP/SWPB emulation handler [ 1.690011] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 1.697786] hctosys: unable to open rtc device (rtc0) [ 1.839519] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [hummingboard 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [hummingboard 01:44]: got exception: timeout ~$off
[PYBOOT] [hummingboard 01:45]: Done.
========================================================================
Board minnowmax-x86-minnowmax_defconfig failure log: -------------------------------------------------
Connected to minnowmax console [channel connected] (~$quit to exit)~$open
~$hardreset
Command(minnowmax console)> open console already open
Command(minnowmax console)> hardreset (user:build) Reset target node minnowmax status: off node minnowmax status: on
[PYBOOT] [minnowmax 00:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [minnowmax 00:54]: got exception: timeout ~$off
[PYBOOT] [minnowmax 00:55]: Done.
========================================================================
Board pi-arm-exynos_defconfig failure log: -------------------------------------------------
[ 2.872336] snow-audio sound: snd_soc_register_card failed (-22) [ 2.878376] snow-audio: probe of sound failed with error -22 [ 2.883829] usb 5-1: New USB device found, idVendor=2232, idProduct=1056 [ 2.890645] usb 5-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.899020] NET: Registered protocol family 10 [ 2.902709] sit: IPv6 over IPv4 tunneling driver [ 2.906654] usb 5-1: Product: WebCam SC-10HDM13631N [ 2.912094] NET: Registered protocol family 17 [ 2.916065] usb 5-1: Manufacturer: Generic [ 2.920011] NET: Registered protocol family 15 [ 2.924422] usb 5-1: SerialNumber: 200901010001 [ 2.929295] Registering SWP/SWPB emulation handler [ 2.934153] big.LITTLE switcher initializing [ 2.937949] bL_switcher_halve_cpus: no CPU pairing possible [ 2.943636] big.LITTLE switcher initialization failed [ 2.949975] vcd_led: supplied by vbat-supply [ 2.957556] vdd_1v2: supplied by TPS65090_RAILSDCDC1 [ 2.961108] vdd_ldo8: supplied by vdd_1v2 [ 2.965200] vdd_ldo10: supplied by vdd_2v [ 2.969182] video_mid_1a: supplied by TPS65090_RAILSDCDC1 [ 2.978404] TPS65090_RAILSDCDC2: supplied by vbat-supply [ 2.982304] lcd_vdd: supplied by TPS65090_RAILSDCDC2 [ 2.989024] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling [ 2.993407] s3c-rtc 101e0000.rtc: rtc core: registered s3c as rtc1 [ 2.999766] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 3.006217] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 3.012597] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 3.017972] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70, 64 bit host data width, 64 deep fifo [ 3.027474] dwmmc_exynos 12210000.mmc: No vmmc regulator found [ 3.033456] dwmmc_exynos 12210000.mmc: allocated mmc-pwrseq [ 3.038895] vdd_1v8: operation not allowed [ 3.068304] dwmmc_exynos 12210000.mmc: 1 slots initialized [ 3.072916] of_graph_get_next_endpoint(): no port node found in /dp-controller@145B0000
[PYBOOT] [pi 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:47]: got exception: timeout ~$off
[PYBOOT] [pi 01:48]: Done.
========================================================================
Board pit-arm-exynos_defconfig failure log: -------------------------------------------------
[ 2.832260] snow-audio: probe of sound failed with error -22 [ 2.839282] NET: Registered protocol family 10 [ 2.842984] sit: IPv6 over IPv4 tunneling driver [ 2.847587] NET: Registered protocol family 17 [ 2.851626] NET: Registered protocol family 15 [ 2.856324] Registering SWP/SWPB emulation handler [ 2.860561] usb 5-1: New USB device found, idVendor=2232, idProduct=1056 [ 2.867280] big.LITTLE switcher initializing [ 2.871539] usb 5-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2 [ 2.878618] bL_switcher_halve_cpus: no CPU pairing possible [ 2.884139] big.LITTLE switcher initialization failed [ 2.889161] usb 5-1: Product: WebCam SC-10HDM13631N [ 2.894775] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.3.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:43:ee:23 [ 2.905586] usb 5-1: Manufacturer: Generic [ 2.909390] vcd_led: supplied by vbat-supply [ 2.915494] usb 5-1: SerialNumber: 200901010001 [ 2.919657] vdd_1v2: supplied by TPS65090_RAILSDCDC1 [ 2.923940] vdd_ldo8: supplied by vdd_1v2 [ 2.927598] vdd_ldo10: supplied by vdd_2v [ 2.931774] video_mid_1a: supplied by TPS65090_RAILSDCDC1 [ 2.941035] TPS65090_RAILSDCDC2: supplied by vbat-supply [ 2.944961] lcd_vdd: supplied by TPS65090_RAILSDCDC2 [ 2.951800] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling [ 2.956227] s3c-rtc 101e0000.rtc: rtc core: registered s3c as rtc1 [ 2.962256] 7-0048 supply vdd12 not found, using dummy regulator [ 2.968621] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.974978] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.981346] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.986727] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70, 64 bit host data width, 64 deep fifo [ 2.996216] dwmmc_exynos 12210000.mmc: No vmmc regulator found [ 3.002188] dwmmc_exynos 12210000.mmc: allocated mmc-pwrseq [ 3.007670] vdd_1v8: operation not allowed [ 3.038463] dwmmc_exynos 12210000.mmc: 1 slots initialized
[PYBOOT] [pit 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pit 01:49]: got exception: timeout ~$off
[PYBOOT] [pit 01:50]: Done.
========================================================================
Board socfpga-arm-multi_v7_defconfig failure log: -------------------------------------------------
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. root@socfpga:~# cat /proc/cmdline cat /proc/cmdline console=ttyS0,115200 debug root=/dev/mmcblk0p2 rootwait root@socfpga:~# uname -r uname -r 4.2.0-rc3-next-20150721 root@socfpga:~# cat /proc/cpuinfo cat /proc/cpuinfo processor : 0 model name : ARMv7 Processor rev 0 (v7l) BogoMIPS : 1843.20 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpd32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x3 CPU part : 0xc09 CPU revision : 0
processor : 1 model name : ARMv7 Processor rev 0 (v7l) BogoMIPS : 1843.20 Features : half thumb fastmult vfp edsp thumbee neon vfpv3 tls vfpd32 CPU implementer : 0x41 CPU architecture: 7 CPU variant : 0x3 CPU part : 0xc09 CPU revision : 0
Hardware : Altera SOCFPGA Revision : 0000 Serial : 0000000000000000 root@socfpga:~# ip -f inet -o addr ip [PYBOOT] [socfpga 02:11]: got exception: ERROR: Timeout waiting for command: ip -f inet -o addr. ~$off
[PYBOOT] [socfpga 02:12]: Done.
========================================================================
Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 1.921015] sgtl5000 1-000a: sgtl5000 revision 0x11 [ 1.972626] fsl-asoc-card sound: ASoC: CPU DAI (null) not registered [ 1.979057] fsl-asoc-card sound: snd_soc_register_card failed (-517) [ 1.991661] fsl-asrc 2034000.asrc: driver registered [ 2.044130] sgtl5000 1-000a: Using internal LDO instead of VDDD [ 2.070189] imx-sgtl5000 sound: sgtl5000 <-> 2028000.ssi mapping ok [ 2.096346] imx-spdif sound-spdif: snd-soc-dummy-dai <-> 2004000.spdif mapping ok [ 2.116781] NET: Registered protocol family 10 [ 2.130785] sit: IPv6 over IPv4 tunneling driver [ 2.139672] NET: Registered protocol family 17 [ 2.144173] can: controller area network core (rev 20120528 abi 9) [ 2.150548] NET: Registered protocol family 29 [ 2.155054] can: raw protocol (rev 20120528) [ 2.159444] can: broadcast manager protocol (rev 20120528 t) [ 2.165175] can: netlink gateway (rev 20130117) max_hops=1 [ 2.171407] Key type dns_resolver registered [ 2.182210] Registering SWP/SWPB emulation handler [ 2.196317] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01 00:00:00 UTC (0) [ 2.246807] ALSA device list: [ 2.249799] #0: imx6-wandboard-sgtl5000 [ 2.253816] #1: imx-spdif [ 2.258095] Waiting for root device /dev/mmcblk0p2... [ 3.326304] cfg80211: Calling CRDA to update world regulatory domain [ 6.484805] cfg80211: Calling CRDA to update world regulatory domain [ 9.644798] cfg80211: Calling CRDA to update world regulatory domain [ 12.804806] cfg80211: Calling CRDA to update world regulatory domain [ 15.964800] cfg80211: Calling CRDA to update world regulatory domain [ 19.124802] cfg80211: Calling CRDA to update world regulatory domain [ 22.284777] cfg80211: Calling CRDA to update world regulatory domain [ 25.444798] cfg80211: Calling CRDA to update world regulatory domain [ 28.604802] cfg80211: Calling CRDA to update world regulatory domain [ 31.764801] cfg80211: Calling CRDA to update world regulatory domain [ 34.924825] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA
[PYBOOT] [wandboard 01:42]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 01:43]: got exception: timeout ~$off
[PYBOOT] [wandboard 01:44]: Done.
========================================================================
Board wandboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.281596] sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO [ 1.286783] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode [ 1.297064] sdhci-esdhc-imx 2190000.usdhc: No vmmc regulator found [ 1.303282] sdhci-esdhc-imx 2190000.usdhc: No vqmmc regulator found [ 1.343826] mmc0: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 1.351415] /soc/aips-bus@02100000/usdhc@02194000: voltage-ranges unspecified [ 1.358616] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 1.368872] sdhci-esdhc-imx 2194000.usdhc: No vmmc regulator found [ 1.375084] sdhci-esdhc-imx 2194000.usdhc: No vqmmc regulator found [ 1.413717] mmc1: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 1.421303] /soc/aips-bus@02100000/usdhc@02198000: voltage-ranges unspecified [ 1.428485] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 1.433663] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode [ 1.442886] sdhci-esdhc-imx 2198000.usdhc: No vmmc regulator found [ 1.449099] sdhci-esdhc-imx 2198000.usdhc: No vqmmc regulator found [ 1.489783] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 1.498751] ledtrig-cpu: registered to indicate activity on CPUs [ 1.505013] usbcore: registered new interface driver usbhid [ 1.510611] usbhid: USB HID core driver [ 1.518873] NET: Registered protocol family 10 [ 1.524285] sit: IPv6 over IPv4 tunneling driver [ 1.529511] NET: Registered protocol family 17 [ 1.534007] can: controller area network core (rev 20120528 abi 9) [ 1.540270] NET: Registered protocol family 29 [ 1.544754] can: raw protocol (rev 20120528) [ 1.549052] can: broadcast manager protocol (rev 20120528 t) [ 1.554744] can: netlink gateway (rev 20130117) max_hops=1 [ 1.560636] Key type dns_resolver registered [ 1.565377] ThumbEE CPU extension supported. [ 1.569693] Registering SWP/SWPB emulation handler [ 1.578242] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 1.589976] hctosys: unable to open rtc device (rtc0) [ 1.604717] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [wandboard 02:01]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 02:02]: got exception: timeout ~$off
[PYBOOT] [wandboard 02:03]: Done.
kernel-build-reports@lists.linaro.org