Full logs are available at http://arm-soc.lixom.net/bootlogs/arm-soc/v3.16-rc1-54-g6c9d161/

Failed boards:

capri bcm_defconfig : FAILED 1:44.60 cubie2 multi_v7_defconfig : FAILED 2:07.71 omap5uevm omap2plus_defconfig : FAILED 2:05.43 omap5uevm multi_lpae_defconfig : FAILED 2:03.05 snowball u8500_defconfig : FAILED 2:05.74

Successful boards:

apc vt8500_v6_v7_defconfig : passed 1:14.70 arndale exynos_defconfig : passed 1:15.30 arndale multi_v7_defconfig : passed 1:35.37 arndale multi_lpae_defconfig : passed 1:22.80 bbb omap2plus_defconfig : passed 1:31.18 bbb multi_v7_defconfig : passed 1:34.37 beaver tegra_defconfig : passed 0:58.87 beaver multi_v7_defconfig : passed 0:57.47 capri multi_v7_defconfig : passed 0:40.73 colombus multi_v7_defconfig : passed 0:56.45 colombus multi_lpae_defconfig : passed 0:58.04 cubie sunxi_defconfig : passed 1:12.13 cubie multi_v7_defconfig : passed 1:29.84 cubie2 sunxi_defconfig : passed 1:20.44 cubie2 multi_lpae_defconfig : passed 1:21.16 cubox multi_v7_defconfig : passed 1:21.72 dalmore tegra_defconfig : passed 2:31.05 dalmore multi_v7_defconfig : passed 1:25.55 dalmore multi_lpae_defconfig : passed 1:27.13 hummingboard imx_v6_v7_defconfig : passed 1:13.57 hummingboard multi_v7_defconfig : passed 1:12.60 jetsontk1 tegra_defconfig : passed 1:07.74 jetsontk1 multi_v7_defconfig : passed 0:58.78 jetsontk1 multi_lpae_defconfig : passed 0:55.19 panda omap2plus_defconfig : warnings 1:36.77 panda multi_v7_defconfig : warnings 1:43.55 sama5 sama5_defconfig : warnings 1:52.71 seaboard tegra_defconfig : passed 1:10.19 seaboard multi_v7_defconfig : passed 1:07.39 snow multi_v7_defconfig : passed 0:59.95 snow multi_lpae_defconfig : passed 0:57.77 snowball multi_v7_defconfig : passed 4:23.17 trimslice tegra_defconfig : passed 1:53.31 trimslice multi_v7_defconfig : passed 0:57.05 wandboard imx_v6_v7_defconfig : passed 1:08.34 wandboard multi_v7_defconfig : passed 1:21.93

Offline boards:

colombus sunxi_defconfig : OFFLINE 0:54.17 omap5uevm multi_v7_defconfig : OFFLINE 2:21.90 snow exynos_defconfig : OFFLINE 2:01.54

Board legend is available at http://arm-soc.lixom.net/boards.html

Last entries of failed logs below:

========================================================================

Board capri-bcm_defconfig failure log: -------------------------------------------------

[ 0.480000] vsr: at 1240 mV [ 0.480000] gpldo1: at 1200 mV [ 0.480000] gpldo2: at 3300 mV [ 0.490000] gpldo3: at 1200 mV [ 0.490000] gpldo4: at 1800 mV [ 0.490000] gpldo5: at 1200 mV [ 0.500000] gpldo6: at 3300 mV [ 0.500000] : no parameters [ 0.500000] : Failed to create debugfs directory [ 0.510000] bcm-kona-i2c 3500d000.i2c: device registered successfully [ 0.510000] sdhci: Secure Digital Host Controller Interface driver [ 0.520000] sdhci: Copyright(c) Pierre Ossman [ 0.520000] TCP: cubic registered [ 0.520000] NET: Registered protocol family 10 [ 0.530000] sit: IPv6 over IPv4 tunneling driver [ 0.530000] NET: Registered protocol family 17 [ 0.530000] NET: Registered protocol family 15 [ 0.540000] ThumbEE CPU extension supported. [ 0.540000] gpldo6: disabling [ 0.550000] gpldo5: disabling [ 0.550000] gpldo4: disabling [ 0.550000] gpldo3: disabling [ 0.560000] gpldo2: disabling [ 0.560000] gpldo1: disabling [ 0.560000] vsr: disabling [ 0.570000] sdsr2: disabling [ 0.570000] sdsr1: disabling [ 0.570000] msr: disabling [ 0.580000] iosr2: disabling [ 0.580000] csr: disabling [ 0.580000] mmcldo2: disabling [ 0.590000] mmcldo1: disabling [ 0.590000] Waiting for root device /dev/mmcblk0p8...

[PYBOOT] [capri 01:41]: Timed out waiting for "<type 'str'>":

[PYBOOT] [capri 01:42]: got exception: timeout ~$off

[PYBOOT] [capri 01:44]: Done.

========================================================================

Board cubie2-multi_v7_defconfig failure log: -------------------------------------------------

U-Boot 2013.10-rc2-00709-g3977e12 (Oct 18 2013 - 16:12:20) Allwinner Technology

CPU: Allwinner A20 (SUN7I) Board: Cubieboard2 I2C: ready DRAM: 1 GiB MMC: SUNXI SD/MMC: 0 In: serial Out: serial Err: serial Net: emac Hit any key to stop autoboot: 3  2  1  0 reading uEnv.txt ** Unable to read file uEnv.txt ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** reading boot.scr ** Unable to read file boot.scr ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** reading script.bin ** Unable to read file script.bin ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** sun7i# node: cubie2 status: on

[PYBOOT] [cubie2 02:05]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cubie2 02:06]: got exception: timeout ~$off

[PYBOOT] [cubie2 02:07]: Done.

========================================================================

Board omap5uevm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 47.072393] omap_vp_init: No PMIC info for vdd_core [ 47.072396] omap_vc_init_channel: No PMIC info for vdd_mm [ 47.072398] omap_vp_init: No PMIC info for vdd_mm [ 47.072402] omap_vc_init_channel: No PMIC info for vdd_mpu [ 47.072403] omap_vp_init: No PMIC info for vdd_mpu [ 47.072716] ThumbEE CPU extension supported. [ 47.072730] Registering SWP/SWPB emulation handler [ 47.077430] palmas 0-0048: Irq flag is 0x00000000 [ 47.155708] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 47.156557] mmc0: new high speed MMC card at address 0001 [ 47.156811] mmcblk0: mmc0:0001 SEM04G 3.68 GiB [ 47.161536] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 47.161626] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 47.162214] mmcblk0: unknown partition table [ 47.162998] mmcblk0boot1: unknown partition table [ 47.163739] mmcblk0boot0: unknown partition table [ 47.200538] smps123: 600 <--> 1500 mV at 1060 mV [ 47.206671] smps45: 600 <--> 1310 mV at 1030 mV [ 47.213092] smps6: 1200 mV [ 47.217059] smps7: 1800 mV [ 47.221165] smps8: 600 <--> 1310 mV at 1040 mV [ 47.226921] smps9: failed to get the current voltage [ 47.232170] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 47.244221] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 47.371717] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.516725] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.522810] platform 4a140000.sata: Driver ahci requests probe deferral [ 47.530274] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 47.537140] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 47.544863] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.558333] ALSA device list: [ 47.561428] No soundcards found. [ 47.565442] Waiting for root device /dev/mmcblk1p2...

[PYBOOT] [omap5uevm 02:00]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:01]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:02]: Done.

========================================================================

Board omap5uevm-omap2plus_defconfig failure log: -------------------------------------------------

[ 1.915631] omap_vp_init: No PMIC info for vdd_core [ 1.915641] omap_vc_init_channel: No PMIC info for vdd_mm [ 1.915644] omap_vp_init: No PMIC info for vdd_mm [ 1.915653] omap_vc_init_channel: No PMIC info for vdd_mpu [ 1.915656] omap_vp_init: No PMIC info for vdd_mpu [ 1.916218] ThumbEE CPU extension supported. [ 1.916244] Registering SWP/SWPB emulation handler [ 1.916258] SmartReflex Class3 initialized [ 1.933609] palmas 0-0048: Irq flag is 0x00000000 [ 2.022785] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 2.031706] mmcblk0: unknown partition table [ 2.038245] mmcblk0boot1: unknown partition table [ 2.045108] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 2.050571] mmcblk0boot0: unknown partition table [ 2.103661] smps123: 600 <--> 1500 mV at 1060 mV [ 2.110795] smps45: 600 <--> 1310 mV at 1030 mV [ 2.118215] smps6: 1200 mV [ 2.123006] smps7: 1800 mV [ 2.127929] smps8: 600 <--> 1310 mV at 1040 mV [ 2.134469] smps9: failed to get the current voltage [ 2.140409] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.154809] palmas-pmic: probe of 48070000.i2c:palmas@48:palmas_pmic failed with error -22 [ 2.163650] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.171514] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.177636] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.186761] of_get_named_gpiod_flags: can't parse gpios property of node '/ocp/mmc@4809c000[0]' [ 2.196138] omap_hsmmc 4809c000.mmc: unable to get vmmc regulator -517 [ 2.203094] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.211642] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.220322] sr_init: No PMIC hook to init smartreflex [ 2.225782] sr_init: platform driver register failed for SR [ 2.254229] pbias_mmc_omap5: disabling [ 2.259760] Waiting for root device /dev/mmcblk1p2...

[PYBOOT] [omap5uevm 02:02]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:03]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:04]: Done.

========================================================================

Board snowball-u8500_defconfig failure log: -------------------------------------------------

[ 3.587951] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.595275] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.606750] musb-hdrc musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.614562] HS USB OTG: no transceiver configured [ 3.619262] musb-hdrc musb-hdrc.22.auto: musb_init_controller failed with status -517 [ 3.627136] platform musb-hdrc.22.auto: Driver musb-hdrc requests probe deferral [ 3.635040] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.22.auto [ 3.646972] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.22.auto) status -22 [ 3.654296] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.665771] musb-ux500 musb-hdrc.22.auto: Error applying setting, reverse things back [ 3.674285] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.686218] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.693542] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.705017] musb-hdrc musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.712829] HS USB OTG: no transceiver configured [ 3.717529] musb-hdrc musb-hdrc.23.auto: musb_init_controller failed with status -517 [ 3.725372] platform musb-hdrc.23.auto: Driver musb-hdrc requests probe deferral [ 3.733306] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.23.auto [ 3.745208] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.23.auto) status -22 [ 3.752532] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.764007] musb-ux500 musb-hdrc.23.auto: Error applying setting, reverse things back [ 3.772521] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.784454] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.791778] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.803253] musb-hdrc musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.811065] HS USB OTG: no transceiver configured [ 3.815765] musb-hdrc musb-hdrc.24.auto: musb_init_controller failed with status -517 [ 3.823608] platform musb-hdrc.24.auto: Driver musb-hdrc requests probe deferral [ 3.831542] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.24.auto [ 3.843444] pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.24.auto) status -22 [ 3.850769] pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik [ 3.862243] musb-ux500 musb-hdrc.24.auto: Error applying setting, reverse things back [ 3.870727] pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.25.auto

[PYBOOT] [snowball 02:02]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:03]: got exception: timeout ~$off

[PYBOOT] [snowball 02:04]: Done.