Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-rc6-111-g7391daf/

Failed boards:

arndale arm-multi_v7_nosmp_defconfig : FAILED 17:59.21 bbb arm-omap2plus_defconfig : FAILED 1:54.04 bbb arm-multi_v7_defconfig : FAILED 1:59.42 bbb arm-multi_v7_nosmp_defconfig : FAILED 2:17.44 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:44.03 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:50.13 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 2:00.79 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 1:55.51 chitra powerpc-pasemi_defconfig : BUILD FAILED colombus arm-multi_v7_nosmp_defconfig : FAILED 3:20.96 cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.43 cosmic arm-multi_v7_defconfig : FAILED 2:12.68 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:27.65 dalmore arm-tegra_defconfig : FAILED 1:48.54 dalmore arm-multi_v7_defconfig : FAILED 1:59.95 dalmore arm-multi_lpae_defconfig : FAILED 2:09.30 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:55.85 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:57.03 omap5uevm arm-multi_v7_defconfig : FAILED 0:50.18 omap5uevm arm-multi_lpae_defconfig : FAILED 0:49.70 omap5uevm arm-multi_v7_nosmp_defconfig : FAILED 1:35.61 seaboard arm-tegra_defconfig : FAILED 1:52.39 seaboard arm-multi_v7_defconfig : FAILED 1:53.13 seaboard arm-multi_v7_nosmp_defconfig : FAILED 1:50.03 snow arm-multi_v7_nosmp_defconfig : FAILED 3:45.22 snowball arm-u8500_defconfig : FAILED 1:56.29 snowball arm-multi_v7_defconfig : FAILED 2:05.76 snowball arm-multi_v7_nosmp_defconfig : FAILED 1:58.51 wandboard arm-imx_v6_v7_defconfig : FAILED 2:58.48

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:21.81 arndale arm-exynos_defconfig : passed 1:32.79 arndale arm-multi_v7_defconfig : passed 1:25.80 arndale arm-multi_lpae_defconfig : passed 1:19.48 capri arm-bcm_defconfig : passed 0:45.49 capri arm-multi_v7_defconfig : passed 0:51.33 capri arm-multi_v7_nosmp_defconfig : warnings 1:33.67 chitra powerpc-ppc64_defconfig : passed 3:04.34 colombus arm-sunxi_defconfig : passed 2:25.72 colombus arm-multi_v7_defconfig : passed 2:47.88 colombus arm-multi_lpae_defconfig : passed 2:40.51 cubie arm-sunxi_defconfig : passed 0:57.37 cubie arm-multi_v7_defconfig : passed 0:53.95 cubie arm-multi_v7_nosmp_defconfig : passed 0:58.83 cubie2 arm-sunxi_defconfig : passed 0:50.55 cubie2 arm-multi_v7_defconfig : passed 0:54.57 cubie2 arm-multi_lpae_defconfig : passed 0:58.42 cubie2 arm-multi_v7_nosmp_defconfig : warnings 1:00.52 cubox arm-multi_v7_defconfig : passed 1:15.96 cubox arm-mvebu_v7_defconfig : passed 1:03.52 cubox arm-multi_v7_nosmp_defconfig : passed 1:17.61 hummingboard arm-imx_v6_v7_defconfig : passed 1:20.08 hummingboard arm-multi_v7_defconfig : passed 1:37.76 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:08.67 jetsontk1 arm-tegra_defconfig : passed 1:35.56 jetsontk1 arm-multi_v7_defconfig : passed 1:34.18 jetsontk1 arm-multi_lpae_defconfig : passed 1:53.26 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:36.42 omap5uevm arm-omap2plus_defconfig : passed 1:03.17 pandaes arm-omap2plus_defconfig : warnings 1:37.78 pandaes arm-multi_v7_defconfig : passed 1:42.91 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:59.58 pi arm-exynos_defconfig : passed 2:13.50 pi arm-multi_v7_defconfig : passed 2:16.50 pi arm-multi_lpae_defconfig : passed 2:23.88 pi arm-multi_v7_nosmp_defconfig : warnings 2:08.90 pit arm-exynos_defconfig : passed 2:10.48 pit arm-multi_v7_defconfig : passed 2:15.59 pit arm-multi_lpae_defconfig : passed 2:22.68 pit arm-multi_v7_nosmp_defconfig : warnings 2:16.02 seattle arm64-defconfig : warnings 2:22.98 snow arm-exynos_defconfig : passed 2:08.47 snow arm-multi_v7_defconfig : passed 2:12.13 snow arm-multi_lpae_defconfig : passed 1:59.23 trimslice arm-tegra_defconfig : passed 2:41.89 trimslice arm-multi_v7_defconfig : passed 1:53.24 trimslice arm-multi_v7_nosmp_defconfig : warnings 2:48.54 wandboard arm-multi_v7_defconfig : passed 1:15.88 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:15.46

Offline boards:

beaver arm-tegra_defconfig : OFFLINE 2:15.32 beaver arm-multi_v7_defconfig : OFFLINE 2:16.74 beaver arm-multi_v7_nosmp_defconfig : OFFLINE 2:13.92 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:15.56 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:16.36 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 1:33.84 parallella arm-multi_v7_defconfig : OFFLINE 2:30.44 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:16.73 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:48.98 rk3288evb arm-multi_lpae_defconfig : OFFLINE 1:03.17 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:42.82 sama5 arm-sama5_defconfig : OFFLINE 2:17.01 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:30.23 socfpga arm-socfpga_defconfig : OFFLINE 2:26.44 socfpga arm-multi_v7_defconfig : OFFLINE 2:33.05 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:14.24

Board legend is available at http://arm-soc.lixom.net/boards.html

Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.557222] usbcore: registered new interface driver smsc75xx [ 1.562955] usbcore: registered new interface driver smsc95xx [ 1.568671] usbcore: registered new interface driver net1080 [ 1.574313] usbcore: registered new interface driver cdc_subset [ 1.580214] usbcore: registered new interface driver zaurus [ 1.585794] usbcore: registered new interface driver cdc_ncm [ 1.592085] usb_phy_generic.0.auto supply vcc not found, using dummy regulator [ 1.598704] usb_phy_generic.1.auto supply vcc not found, using dummy regulator [ 1.605831] exynos-dwc3 usb@12000000: no suspend clk specified [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.6.0-rc6-00111-g7391daf (build@brutus) (gcc version 6.1.0 (GCC) ) #1 Tue May 3 15:22:12 PDT 2016 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Insignal Arndale evaluation board based on EXYNOS5250 [ 0.000000] cma: Reserved 64 MiB at 0xbc000000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Samsung CPU ID: 0x43520010 [ 0.000000] On node 0 totalpages: 520192 [ 0.000000] free_area_init_node: node 0, pgdat c10fd334, node_mem_map eeff7000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 192512 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327680 pages, LIFO batch:31 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at /home/build/work/batch/arch/arm/kernel/devtree.c:149 arm_dt_init_cpu_maps+0xf8/0x134 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.6.0-rc6-00111-g7391daf #1 [ 0.000000] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 0.000000] [<c030e70c>] (unwind_backtrace) from [<c030b298>] (show_stack+0x10/0x14) [ 0.000000] [<c030b298>] (show_stack) from [<c0335fb8>] (__warn+0xe4/0xfc) [ 0.000000] [<c0335fb8>] (__warn) from [<c0336008>] (warn_slowpath_fmt+0x38/0x48) [ 0.000000] [<c0336008>] (warn_slowpath_fmt) from [<c0f04040>] (arm_dt_init_cpu_maps+0xf8/0x134) [ 0.000000] [<c0f04040>] (arm_dt_init_cpu_maps) from [<c0f03368>] (setup_arch+0x780/0x8b8) [ 0.000000] [<c0f03368>] (setup_arch) from [<c0f00940>] (start_ [PYBOOT] [arndale 17:53]: got exception: maximum recursion depth exceeded ~$off

[PYBOOT] [arndale 17:55]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.631205] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.641488] ledtrig-cpu: registered to indicate activity on CPUs [ 1.648581] usbcore: registered new interface driver usbhid [ 1.654510] usbhid: USB HID core driver [ 1.666523] NET: Registered protocol family 10 [ 1.673119] sit: IPv6 over IPv4 tunneling driver [ 1.679253] NET: Registered protocol family 17 [ 1.684015] can: controller area network core (rev 20120528 abi 9) [ 1.690655] NET: Registered protocol family 29 [ 1.695373] can: raw protocol (rev 20120528) [ 1.699894] can: broadcast manager protocol (rev 20120528 t) [ 1.705885] can: netlink gateway (rev 20130117) max_hops=1 [ 1.712627] Key type dns_resolver registered [ 1.717537] omap_voltage_late_init: Voltage driver support not added [ 1.725825] ThumbEE CPU extension supported. [ 1.730449] Registering SWP/SWPB emulation handler [ 1.772666] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.779193] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.786973] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.795678] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.803604] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.811440] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.819262] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.826614] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.835283] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.843212] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.852946] mmc1: new high speed MMC card at address 0001 [ 1.860190] hctosys: unable to open rtc device (rtc0) [ 1.873196] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.879240] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.886219] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.895139] mmcblk1: p1 p2 [ 1.900837] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [bbb 01:56]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:57]: got exception: timeout ~$off

[PYBOOT] [bbb 01:58]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.322453] sdhci: Secure Digital Host Controller Interface driver [ 1.328974] sdhci: Copyright(c) Pierre Ossman [ 1.334772] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.397817] Synopsys Designware Multimedia Card Interface Driver [ 1.405198] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.414385] ledtrig-cpu: registered to indicate activity on CPUs [ 1.421123] usbcore: registered new interface driver usbhid [ 1.426999] usbhid: USB HID core driver [ 1.436574] NET: Registered protocol family 10 [ 1.443045] sit: IPv6 over IPv4 tunneling driver [ 1.448918] NET: Registered protocol family 17 [ 1.453652] can: controller area network core (rev 20120528 abi 9) [ 1.460245] NET: Registered protocol family 29 [ 1.464939] can: raw protocol (rev 20120528) [ 1.469450] can: broadcast manager protocol (rev 20120528 t) [ 1.475426] can: netlink gateway (rev 20130117) max_hops=1 [ 1.481934] Key type dns_resolver registered [ 1.486802] omap_voltage_late_init: Voltage driver support not added [ 1.494605] ThumbEE CPU extension supported. [ 1.507182] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.514736] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.522802] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.530529] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.538216] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.545894] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.553171] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.560844] hctosys: unable to open rtc device (rtc0) [ 1.571564] Waiting for root device /dev/mmcblk0p2... [ 1.607079] mmc1: new high speed MMC card at address 0001 [ 1.613544] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.618607] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.625087] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.633528] mmcblk1: p1 p2

[PYBOOT] [bbb 02:14]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 02:15]: got exception: timeout ~$off

[PYBOOT] [bbb 02:16]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.050129] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.056266] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.062612] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.069507] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.079130] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.088656] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.095695] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.138873] ledtrig-cpu: registered to indicate activity on CPUs [ 2.147580] oprofile: using arm/armv7 [ 2.152670] Initializing XFRM netlink socket [ 2.157753] NET: Registered protocol family 10 [ 2.168427] sit: IPv6 over IPv4 tunneling driver [ 2.177161] NET: Registered protocol family 17 [ 2.182090] NET: Registered protocol family 15 [ 2.187323] Key type dns_resolver registered [ 2.192181] omap_voltage_late_init: Voltage driver support not added [ 2.198918] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.207412] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.217663] ThumbEE CPU extension supported. [ 2.222313] Registering SWP/SWPB emulation handler [ 2.227361] SmartReflex Class3 initialized [ 2.296716] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.304003] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.314519] mmc1: new high speed MMC card at address 0001 [ 2.326615] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.334898] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.342671] hctosys: unable to open rtc device (rtc0) [ 2.347992] sr_init: No PMIC hook to init smartreflex [ 2.353780] sr_init: platform driver register failed for SR [ 2.393780] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.401733] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.415992] mmcblk1: p1 p2 [ 2.433258] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:52]: got exception: timeout ~$off

[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.717195] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.724277] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750397] rtc-ds1307 2-006f: SET TIME! [ 1.756123] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.762888] rtc-ds1307 2-006f: 64 bytes nvram [ 1.767502] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.775697] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.781480] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.789734] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.798912] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.805784] hub 1-0:1.0: USB hub found [ 1.809740] hub 1-0:1.0: 1 port detected [ 1.814140] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.819923] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.828030] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.837062] hub 2-0:1.0: USB hub found [ 1.841037] hub 2-0:1.0: 1 port detected [ 1.847071] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.881056] vdd_3v3: supplied by regen1 [ 1.919133] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.937315] aic_dvdd_fixed: disabling [ 1.942057] Waiting for root device /dev/mmcblk0p1... [ 1.969230] mmc1: new high speed MMC card at address 0001 [ 1.975192] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.980086] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.986418] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.993296] mmcblk1: p1 [ 2.119900] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.154923] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.180144] hub 2-1:1.0: USB hub found [ 2.184121] hub 2-1:1.0: 4 ports detected [ 2.276166] hub 1-1:1.0: USB hub found [ 2.280156] hub 1-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 01:57]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:58]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 02:00]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.717147] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.724226] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750461] rtc-ds1307 2-006f: SET TIME! [ 1.756223] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.762983] rtc-ds1307 2-006f: 64 bytes nvram [ 1.767595] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.775764] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.781557] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.789803] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.798972] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.805857] hub 1-0:1.0: USB hub found [ 1.809814] hub 1-0:1.0: 1 port detected [ 1.814206] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.819979] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.828081] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.837093] hub 2-0:1.0: USB hub found [ 1.841053] hub 2-0:1.0: 1 port detected [ 1.847072] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.881066] vdd_3v3: supplied by regen1 [ 1.919991] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.937126] aic_dvdd_fixed: disabling [ 1.941727] Waiting for root device /dev/mmcblk0p1... [ 1.972021] mmc1: new high speed MMC card at address 0001 [ 1.977997] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.982884] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.989216] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.996093] mmcblk1: p1 [ 2.119952] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.154977] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.180192] hub 2-1:1.0: USB hub found [ 2.184174] hub 2-1:1.0: 4 ports detected [ 2.276214] hub 1-1:1.0: USB hub found [ 2.280200] hub 1-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 01:47]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:48]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:49]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.590889] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.597955] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.623180] rtc-ds1307 2-006f: SET TIME! [ 1.628805] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.635519] rtc-ds1307 2-006f: 64 bytes nvram [ 1.640105] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.647495] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.653270] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.661487] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.670640] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.677360] hub 1-0:1.0: USB hub found [ 1.681313] hub 1-0:1.0: 1 port detected [ 1.685629] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.691395] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.699475] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.708340] hub 2-0:1.0: USB hub found [ 1.712283] hub 2-0:1.0: 1 port detected [ 1.717536] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.753412] vdd_3v3: supplied by regen1 [ 1.784492] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.797504] aic_dvdd_fixed: disabling [ 1.802886] Waiting for root device /dev/mmcblk0p1... [ 1.849733] mmc1: new high speed MMC card at address 0001 [ 1.855599] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.860428] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.866724] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.873502] mmcblk1: p1 [ 1.992717] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.022737] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.051575] hub 2-1:1.0: USB hub found [ 2.055554] hub 2-1:1.0: 4 ports detected [ 2.147577] hub 1-1:1.0: USB hub found [ 2.151544] hub 1-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 01:52]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:53]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:55]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.174909] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.181780] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.192174] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.197036] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.203353] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.210201] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.219800] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.229304] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.236362] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.283798] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.290095] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.296967] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.306559] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.316065] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.323111] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.329229] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.335534] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.342375] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.351966] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.361457] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.368501] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.375201] vdd_3v3: supplied by regen1 [ 2.413918] hctosys: unable to open rtc device (rtc0) [ 2.419219] sr_init: No PMIC hook to init smartreflex [ 2.424725] sr_init: platform driver register failed for SR [ 2.465553] mmc1: new high speed MMC card at address 0001 [ 2.472406] aic_dvdd_fixed: disabling [ 2.473506] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.474226] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.474881] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.484652] mmcblk1: p1 [ 2.496506] ldousb: disabling [ 2.502498] Waiting for root device /dev/mmcblk0p1...

[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:43]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[?25l[?1c7[ ok 8[?25h[?0c. [....] Synthesizing the initial hotplug events...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 41.446942] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 41.461332] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 84.808640] random: dd urandom read with 55 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

[ 89.198982] eth0: device MAC address 1e:ca:f9:3a:39:2f [ 89.353949] RX IPC Checksum Offload disabled [ 89.358559] No MAC Management Counters available [ 89.364307] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/1e:ca:f9:3a:39:2f Sending on LPF/eth0/1e:ca:f9:3a:39:2f Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 20 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 18

[PYBOOT] [colombus 03:18]: Timed out waiting for "<type 'str'>":

[PYBOOT] [colombus 03:19]: got exception: timeout ~$off

[PYBOOT] [colombus 03:20]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

[ 14.466893] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.541149] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.551477] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.625662] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.635980] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.710207] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.720527] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.794715] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.805037] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.879276] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.889602] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.963784] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.974110] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.048368] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.058735] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.133087] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.143403] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.217635] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.227954] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.302189] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.312507] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.386740] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.397063] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.471285] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.481608] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.555780] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.566100] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.640324] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.650645] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.724827] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.735147] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.809369] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.819692] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 14.082527] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.156514] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.166589] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.240572] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.250649] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.324632] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.334710] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.408699] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.418777] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.492769] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.502845] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.576837] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.586910] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.660899] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.670971] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.744958] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.755030] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.829018] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.839090] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.913081] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.923165] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.997162] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.007236] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.081223] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.091295] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.165274] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.175347] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.249329] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.259427] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.333417] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.343494] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.417482] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.427562] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 02:10]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:11]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:12]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 13.872774] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 17.946688] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 17.956739] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.030652] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.040703] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.114618] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.124677] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.198591] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.208653] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.282564] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.292625] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.366535] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.376599] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.450521] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.460578] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.534491] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.544538] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.618449] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.628502] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.702410] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.712458] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.786364] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.796413] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 62.870318] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 62.880370] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 66.954286] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 66.964343] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.038257] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.048317] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.122230] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.132291] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.206198] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.216255] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 02:24]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:25]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:27]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.491038] Key type dns_resolver registered [ 2.497441] ThumbEE CPU extension supported. [ 2.501859] Registering SWP/SWPB emulation handler [ 2.534628] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.541725] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.552027] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.566835] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.573632] [drm] No driver support for vblank timestamp query. [ 2.588699] mmc1: new high speed MMC card at address 0001 [ 2.598340] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.606594] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.616131] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.624722] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.635232] mmcblk1: p1 [ 2.752291] Console: switching to colour frame buffer device 240x75 [ 2.839691] drm drm: fb0: frame buffer device [ 2.858853] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.868950] usb2_vbus: supplied by vdd-sys-5v0 [ 2.880654] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.886249] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.895029] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.908863] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.919130] hub 1-0:1.0: USB hub found [ 2.923134] hub 1-0:1.0: 1 port detected [ 2.933687] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.947967] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.009935] dvdd_ts: disabling [ 3.013036] usb1_vbus: disabling [ 3.016407] vdd_cam_1v8_reg: disabling [ 3.024046] Waiting for root device /dev/mmcblk0p1... [ 3.238889] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.217450] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 65.333415] random: nonblocking pool is initialized

[PYBOOT] [dalmore 02:03]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 02:04]: got exception: timeout ~$off

[PYBOOT] [dalmore 02:06]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.486469] Key type dns_resolver registered [ 2.492878] ThumbEE CPU extension supported. [ 2.497302] Registering SWP/SWPB emulation handler [ 2.524681] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.531902] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.541750] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.556855] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.563699] [drm] No driver support for vblank timestamp query. [ 2.586863] mmc1: new high speed MMC card at address 0001 [ 2.595542] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.602624] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.611342] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.618543] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.629062] mmcblk1: p1 [ 2.740854] Console: switching to colour frame buffer device 240x75 [ 2.828274] drm drm: fb0: frame buffer device [ 2.843931] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.854024] usb2_vbus: supplied by vdd-sys-5v0 [ 2.865843] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.871443] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.880246] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.893944] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.903220] hub 1-0:1.0: USB hub found [ 2.907247] hub 1-0:1.0: 1 port detected [ 2.916852] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.930879] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.994749] dvdd_ts: disabling [ 2.997850] usb1_vbus: disabling [ 3.001214] vdd_cam_1v8_reg: disabling [ 3.008732] Waiting for root device /dev/mmcblk0p1... [ 3.223971] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.202598] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 65.493910] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:56]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:57]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:58]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 2.031199] can: broadcast manager protocol (rev 20120528 t) [ 2.036954] can: netlink gateway (rev 20130117) max_hops=1 [ 2.043594] Key type dns_resolver registered [ 2.048704] ThumbEE CPU extension supported. [ 2.080453] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.085389] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.095477] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.118592] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.125276] [drm] No driver support for vblank timestamp query. [ 2.288833] Console: switching to colour frame buffer device 240x75 [ 2.375696] drm drm: fb0: frame buffer device [ 2.380425] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.388380] usb2_vbus: supplied by vdd-sys-5v0 [ 2.395970] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.401519] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.409458] mmc1: new high speed MMC card at address 0001 [ 2.416105] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.421134] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.427845] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.433929] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.440303] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.446455] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.454175] mmcblk1: p1 [ 2.459083] hub 1-0:1.0: USB hub found [ 2.466065] hub 1-0:1.0: 1 port detected [ 2.475624] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.486912] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.520857] dvdd_ts: disabling [ 2.523943] usb1_vbus: disabling [ 2.527269] vdd_cam_1v8_reg: disabling [ 2.532677] Waiting for root device /dev/mmcblk0p1... [ 2.779558] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.732570] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f

[PYBOOT] [dalmore 01:52]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:53]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:54]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------

[ 2.666418] Bluetooth: RFCOMM ver 1.11 [ 2.670369] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.675763] Bluetooth: BNEP socket layer initialized [ 2.680861] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.686858] Bluetooth: HIDP socket layer initialized [ 2.693843] Key type dns_resolver registered [ 2.703444] Registering SWP/SWPB emulation handler [ 2.733648] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.739933] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.748567] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.773218] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.780024] [drm] No driver support for vblank timestamp query. [ 2.957159] Console: switching to colour frame buffer device 240x75 [ 3.044058] drm drm: fb0: frame buffer device [ 3.068987] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.076265] usb2_vbus: supplied by vdd-sys-5v0 [ 3.084711] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.090532] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.099701] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.119006] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.133052] hub 1-0:1.0: USB hub found [ 3.137008] hub 1-0:1.0: 1 port detected [ 3.150800] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.166043] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.260878] dvdd_ts: disabling [ 3.263982] usb1_vbus: disabling [ 3.267245] vdd_cam_1v8_reg: disabling [ 3.272059] ALSA device list: [ 3.275055] #0: NVIDIA Tegra Dalmore [ 3.281066] Waiting for root device /dev/mmcblk0p1... [ 3.458884] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.482038] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 61.690824] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:45]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:46]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:47]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------

[ 1.688642] usbcore: registered new interface driver usbhid [ 1.693880] usbhid: USB HID core driver [ 1.702556] NET: Registered protocol family 10 [ 1.703181] sit: IPv6 over IPv4 tunneling driver [ 1.706396] NET: Registered protocol family 17 [ 1.710426] NET: Registered protocol family 15 [ 1.714881] Key type dns_resolver registered [ 1.719203] Registering SWP/SWPB emulation handler [ 1.733097] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.733381] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.762997] max98090 1-0010: MAX98090 REVID=0x43 [ 1.765288] max98090 1-0010: use default 2.8v micbias [ 1.767641] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.777061] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.777795] usb 1-3: New USB device found, idVendor=0424, idProduct=3503 [ 1.777800] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.778407] hub 1-3:1.0: USB hub found [ 1.778539] hub 1-3:1.0: 3 ports detected [ 1.792138] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.800968] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.821227] mmc1: new DDR MMC card at address 0001 [ 1.826138] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.830400] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.836259] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.842163] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.848252] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.856677] mmcblk1: p1 p2 [ 1.872532] VDD10_HDMI_1.0V: disabling [ 1.873227] vdd_g3d: disabling [ 1.874300] BUCK8_2.8V: disabling [ 1.87p314] ALSA device list: [ 1.879920] #0: Odroid-U3 [ 1.883649] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [odroidu3 01:54]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 01:55]: got exception: timeout ~$off

[PYBOOT] [odroidu3 01:56]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 3.187972] 1da0: 00000000 c03827a8 00000400 00000042 00000002 c1413a30 60000193 00000000 [ 3.196538] 1dc0: c1337708 c0ee2ae8 00000001 c1300000 c13024a4 00000000 c1413a30 00000042 [ 3.205109] 1de0: c1413a30 c1337708 c143637e 00000000 00000000 00000000 00000000 c0382be4 [ 3.213678] 1e00: 00000000 00000000 00000000 00000000 c143637e 00000042 00000001 00000000 [ 3.222235] 1e20: 60000193 00000000 00000000 00001ce7 00000000 c1300000 c1301f58 8000000d [ 3.230800] 1e40: c1339cc8 c1301f58 c1302504 c140dee8 c130250c c0382f38 c0ecdea0 c1301e7c [ 3.239370] 1e60: ffff173d c03c7cb4 00000000 c1301e7c c1204400 c031cb7c c0ecdea0 c0ecde90 [ 3.247939] 1e80: c1300000 c143675c c1339cc8 c0317cac 77359400 00000000 00000001 c13087fc [ 3.256511] 1ea0: 0000000d c0317cac c1300000 c0317cb4 c13087fc c030137c 00000000 c03a4a70 [ 3.265073] 1ec0: 0000e000 c03452d8 00000000 eefcfec0 eefcfec0 00000000 7b003d61 00000000 [ 3.273644] 1ee0: ffffffff 7fffffff c1300000 c1300000 00000000 00000000 c1301f50 fa212000 [ 3.282208] 1f00: fa213000 c140dee8 c130250c c0345640 c12054cc c030ea78 c1302880 c1340078 [ 3.290772] 1f20: fa21200c c1301f50 fa212000 c03017d4 c0308740 a0000013 ffffffff c1301f84 [ 3.299341] 1f40: c1300000 60000093 ffffffff c1301f8c c12075c0 c030c58c 00000000 2ddc5000 [ 3.307916] 1f60: c12075c0 c1301fa8 c1300000 c13024a4 00000000 00000000 c12075c0 c1302504 [ 3.316489] 1f80: c140dee8 c130250c 60000013 c1301fa8 c0378154 c1300000 60000093 ffffffff [ 3.325060] 1fa0: 00000051 c03780bc c1301fb4 c1301fa8 00000000 ffffffff 00000000 c1100c4c [ 3.333626] 1fc0: ffffffff ffffffff 00000000 c1100684 00000000 c11a3a30 c14105d4 c1302480 [ 3.342199] 1fe0: c11a3a2c c1307c4c 8020406a 412fc0f2 00000000 8020807c 00000000 00000000 [ 3.350778] [<c036f778>] (update_cpu_load_active) from [<c0364818>] (scheduler_tick+0x6c/0xe8) [ 3.359808] [<c0364818>] (scheduler_tick) from [<c0393f90>] (update_process_times+0x58/0x64) [ 3.368659] [<c0393f90>] (update_process_times) from [<c03a4de0>] (tick_sched_timer+0x48/0x8c) [ 3.377679] [<c03a4de0>] (tick_sched_timer) from [<c0394cd0>] (__hrtimer_run_queues+0x128/0x1bc) [ 3.386887] [<c0394cd0>] (__hrtimer_run_queues) from [<c0394f20>] (hrtimer_interrupt+0xa8/0x208) [ 3.396099] [<c0394f20>] (hrtimer_interrupt) from [<c09dc930>] (arch_timer_handler_virt+0x28/0x30) [ 3.405487] [<c09dc930>] (arch_timer_handler_virt) from [<c0387d50>] (handle_percpu_devid_irq+0x6c/0x84) [ 3.415420] [<c0387d50>] (handle_percpu_devid_irq) from [<c0383a64>] (generic_handle_irq+0x24/0x34) [ 3.424893] [<c0383a64>] (generic_handle_irq) from [<c0383d14>] (__handle_domain_irq+0x5c/0xb4) [ 3.434005] [<c0383d14>] (__handle_domain_irq) from [<c0301798>] (gic_handle_irq+0x54/0x94) [ 3.442755] [<c0301798>] (gic_handle_irq) from [<c030c494>] (__irq_svc+0x54/0x70) [ 3.450591] Exception stack(0xc1301ac0 to 0xc1301b08) [ 3.455879] 1ac0: 00000275 00000000 ff550000 c09dc8fc c1444b70 000017ff 0cf3f0c8 000000c8 [ 3.464438] 1ae0: c133f970 0000003d 0ccccb60 00000000 00000000 c1301b10 c030f784 c0589844 [ 3.473005] 1b00: 80000113 ffffffff [ 3.476654] [<c030c494>] (__irq_svc) from [<c0589844>] (__timer_delay+0x34/0x5c) [ 3.484410] [<c0 [PYBOOT] [omap5uevm 00:47]: got exception: panic ~$off

[PYBOOT] [omap5uevm 00:49]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.109145] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 2.109147] task: ee06f480 ti: ee090000 task.ti: ee090000 [ 2.109154] PC is at cpu_needs_another_gp+0x58/0xac [ 2.109157] LR is at rcu_check_callbacks+0x23c/0x7a4 [ 2.109161] pc : [<c038dfa0>] lr : [<c03913a8>] psr: 60000193 [ 2.109161] sp : ee091e00 ip : fffffef3 fp : c1337d00 [ 2.109163] r10: c1302534 r9 : 2ddd1000 r8 : ee091e00 [ 2.109165] r7 : 00000000 r6 : c12089c0 r5 : c1337d00 r4 : eefd99c0 [ 2.109167] r3 : eefd99e0 r2 : 00000000 r1 : eefd99c0 r0 : c1337d00 [ 2.109171] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 2.109173] Control: 10c5387d Table: 8020406a DAC: 00000051 [ 2.109175] Process swapper/1 (pid: 0, stack limit = 0xee090220) [ 2.109178] Stack: (0xee091e00 to 0xee092000) [ 2.109183] 1e00: 00000000 eefd92c0 eefd92c0 c12082c0 c130252c c1337f80 c1302100 fffffef3 [ 2.109187] 1e20: 00000000 c1208980 c1337a80 ee090000 00000001 ee06f480 ee091e38 ee091e38 [ 2.109191] 1e40: 00000000 ffffe000 ee06f480 00000000 00000000 eefd5c8c eefd5c80 00000000 [ 2.109195] 1e60: ffffffff c0393f74 eefd5e90 ee091f88 7d77c4b3 c03a4de0 eefd5e90 eefd5c80 [ 2.109198] 1e80: 7d77c4b3 00000000 eefd5c40 eefd5c40 eefd5e90 7d77c36e 00000000 c0394cd0 [ 2.109202] 1ea0: 6e0a4557 00000001 7d77c36e 00000000 c140df0e c0ee4030 eefd5cb8 eefd5c40 [ 2.109206] 1ec0: c1204c40 eefd5cf8 eefd5c54 eefd5cd8 eefd5cb8 00000003 ffffffff c0394f20 [ 2.109210] 1ee0: eefd5cf8 7d2b7fcf 7fffffff 2ddd1000 7d77c36e 00000000 7d77c36e 00000000 [ 2.109214] 1f00: 00000000 eefdbec0 ee003e40 c1302880 ee025bc0 00000013 fa213000 c140dee8 [ 2.109217] 1f20: c130250c c09dc930 eefdbec0 c0387d50 c12054cc 00000000 00000000 00000001 [ 2.109221] 1f40: ee008000 c0383a64 c12054cc c0383d14 c1302880 c1340078 fa21200c ee091f88 [ 2.109225] 1f60: fa212000 c0301798 c0308740 a0000013 ffffffff ee091fbc c12075c0 c1302504 [ 2.109229] 1f80: c140dee8 c030c494 00000001 00000000 ea000013 f0880000 ee090000 c13024a4 [ 2.109233] 1fa0: 00000000 00000000 c12075c0 c1302504 c140dee8 c130250c 60000013 ee091fd8 [ 2.109236] 1fc0: c032aee0 c0308740 a0000013 ffffffff 00000051 c030873c ee090000 c03781e0 [ 2.109240] 1fe0: 00000051 ee091fe0 ae07806a c14106b0 00000000 80301c8c 08b8c0e0 2d9944a1 [ 2.109248] [<c038dfa0>] (cpu_needs_another_gp) from [<00000000>] ( (null)) [ 2.109253] Code: e3520000 0a000001 e3a00001 e12fff1e (e591c028) [ 2.109257] ---[ end trace 277211a4acb5b014 ]--- [ 2.109259] Kernel panic - not syncing: Fatal exception in interrupt [ 3.086208] SMP: failed to stop secondary CPUs [ 3.360506] ---[ end Kernel panic - not syncing: Fatal exception in interrupt

[PYBOOT] [omap5uevm 00:48]: got exception: panic ~$off

[PYBOOT] [omap5uevm 00:49]: Done. Board omap5uevm-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 47.259560] 9de0: 00000000 00000000 00000001 ee006000 fa213000 c0315242 00000000 c0338e40 [ 47.268120] 9e00: c103e4e0 c0361ba8 c10023f4 c103e990 fa21200c fa212000 ee4f9e40 c0301620 [ 47.276690] 9e20: c03373b0 60000113 ffffffff ee4f9e74 ee4f9e90 ee481b28 c0315242 c030bcd4 [ 47.285249] 9e40: 00000001 ee072254 00000000 ee28fb00 ee481980 00000000 ee06c000 00000000 [ 47.293818] 9e60: ee4f9e90 ee481b28 c0315242 00000000 ee072240 ee4f9e90 c0357e7c c03373b0 [ 47.302381] 9e80: 60000113 ffffffff 00000051 c0337758 ee481b44 ee481b44 c0315244 0000000b [ 47.310943] 9ea0: 00000000 c030b5c4 ee4f8218 0000000b 00000000 00000008 ee4f8000 00000000 [ 47.319497] 9ec0: 65000000 38306131 20303030 30613165 31303037 39356520 30303532 33652063 [ 47.328055] 9ee0: 30306331 28203038 35393565 63323136 c0002029 ee4f9f14 80000053 0000012c [ 47.336614] 9f00: ee4fa018 00000005 00000000 0000012c 00000037 ffffe000 ee481dc0 c031a290 [ 47.345174] 9f20: 00000005 c0315580 ee4c5080 c0349428 00000000 ee1d053c c1036cc0 00000000 [ 47.353737] 9f40: c10fef30 ee4c5080 c0349144 00000000 ee42ee00 c1008034 00000005 c031562c [ 47.362307] 9f60: 0000012c ee4fa018 00000037 ffffe000 ee481dc0 c030125c c034da40 ee4c5080 [ 47.370871] 9f80: 00000000 ee4f9f84 ee4f9f84 00000001 ee4f9f90 ee4f9f90 ee42ee00 ee42ee00 [ 47.379435] 9fa0: c034da40 00000000 00000000 c0307998 00000000 00000000 00000000 00000000 [ 47.387993] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 47.396556] 9fe0: 00000000 c110360b ffffffff c0550f5c 00000010 0000000a 00094ffc 00000000 [ 47.405116] [<c036b6ec>] (run_timer_softirq) from [<c0338a3c>] (__do_softirq+0xac/0x214) [ 47.413585] [<c0338a3c>] (__do_softirq) from [<c0338e40>] (irq_exit+0xd8/0x10c) [ 47.421246] [<c0338e40>] (irq_exit) from [<c0361ba8>] (__handle_domain_irq+0x58/0xa8) [ 47.429449] [<c0361ba8>] (__handle_domain_irq) from [<c0301620>] (gic_handle_irq+0x54/0x88) [ 47.438192] [<c0301620>] (gic_handle_irq) from [<c030bcd4>] (__irq_svc+0x54/0x70) [ 47.446020] Exception stack(0xee4f9e40 to 0xee4f9e88) [ 47.451309] 9e40: 00000001 ee072254 00000000 ee28fb00 ee481980 00000000 ee06c000 00000000 [ 47.459871] 9e60: ee4f9e90 ee481b28 c0315242 00000000 ee072240 ee4f9e90 c0357e7c c03373b0 [ 47.468434] 9e80: 60000113 ffffffff [ 47.472083] [<c030bcd4>] (__irq_svc) from [<c03373b0>] (do_exit+0x524/0x908) [ 47.479463] [<c03373b0>] (do_exit) from [<c030b5c4>] (die+0x328/0x394) [ 47.486297] [<c030b5c4>] (die) from [<c031a290>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 47.494588] [<c031a290>] (__do_kernel_fault.part.0) from [<c0315580>] (do_page_fault+0x370/0x384) [ 47.503871] [<c0315580>] (do_page_fault) from [<c030125c>] (do_DataAbort+0x3c/0xb8) [ 47.511885] Code: e7973106 e3530000 128d2004 15832004 (e7875106) [ 47.518264] ---[ end trace cb88537fdc8fa21c ]--- [ 47.523098] Kernel panic - not syncing: Fatal exception in interrupt [ 47.529746] ---[ end Kernel panic - not syncing: Fatal exception in interrupt

[PYBOOT] [omap5uevm 01:33]: got exception: panic ~$off

[PYBOOT] [omap5uevm 01:35]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.657099] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.667519] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.674002] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.679423] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.687880] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.703599] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.710584] hub 3-0:1.0: USB hub found [ 1.715039] hub 3-0:1.0: 1 port detected [ 1.720092] mmc2: switch to bus width 8 failed [ 1.727106] mmc2: switch to bus width 4 failed [ 1.731621] mmc2: new high speed MMC card at address 0001 [ 1.738091] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.743026] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.749193] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.756485] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.763123] [drm] No driver support for vblank timestamp query. [ 1.769933] mmcblk2: p3 [ 1.776872] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.790635] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.799263] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.812135] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.831296] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.835738] mmc0: new SDIO card at address 0001 [ 1.836856] Console: switching to colour frame buffer device 170x48 [ 1.875949] drm drm: fb0: frame buffer device [ 1.893591] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.900388] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.907468] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.921759] vdd_1v5: disabling [ 1.924843] vdd_1v2: disabling [ 2.588131] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.599604] Waiting for root device /dev/mmcblk0p3... [ 58.591978] random: nonblocking pool is initialized

[PYBOOT] [seaboard 01:49]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:51]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:52]: Done. Board seaboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.606923] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.613260] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.623173] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.629621] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.635033] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.642788] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.658124] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.664597] hub 3-0:1.0: USB hub found [ 1.668440] hub 3-0:1.0: 1 port detected [ 1.678960] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.685572] [drm] No driver support for vblank timestamp query. [ 1.692412] mmc2: switch to bus width 8 failed [ 1.697105] mmc2: switch to bus width 4 failed [ 1.701580] mmc2: new high speed MMC card at address 0001 [ 1.707286] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.719320] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.725704] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.726947] mmcblk2: p3 [ 1.741426] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.748992] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.751719] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.765108] Console: switching to colour frame buffer device 170x48 [ 1.807671] drm drm: fb0: frame buffer device [ 1.812148] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.818562] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.825430] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.837009] vdd_1v5: disabling [ 1.840086] vdd_1v2: disabling [ 1.845067] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.868795] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.877261] mmc0: new SDIO card at address 0001 [ 2.552323] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.563171] Waiting for root device /dev/mmcblk0p3...

[PYBOOT] [seaboard 01:46]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:47]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:49]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------

[ 1.670810] Bluetooth: RFCOMM ver 1.11 [ 1.674619] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.679951] Bluetooth: BNEP socket layer initialized [ 1.684941] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.690885] Bluetooth: HIDP socket layer initialized [ 1.696464] Key type dns_resolver registered [ 1.701978] Registering SWP/SWPB emulation handler [ 1.717644] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.724406] VDDIO_HDMI: supplied by vdd_5v0 [ 1.728862] vdd_sys: supplied by vdd_5v0 [ 1.732909] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.737864] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.744468] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.754729] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.761187] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.766643] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.774604] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.791413] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.799637] hub 3-0:1.0: USB hub found [ 1.803440] hub 3-0:1.0: 1 port detected [ 1.814612] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.821231] [drm] No driver support for vblank timestamp query. [ 1.893304] Console: switching to colour frame buffer device 170x48 [ 1.912671] drm drm: fb0: frame buffer device [ 1.941402] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.948573] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 1.956203] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.975839] vdd_1v5: disabling [ 1.978900] vdd_1v2: disabling [ 1.982093] ALSA device list: [ 1.985064] #0: NVIDIA Tegra Seaboard [ 2.319304] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.330419] Waiting for root device /dev/mmcblk0p3...

[PYBOOT] [seaboard 01:49]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:50]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:51]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 3.182908] EXT4-fs (mmcblk0p3): warning: mounting fs with errors, running e2fsck is recommended [ 3.191253] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 4.237258] random: dd urandom read with 57 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

Cannot find device "eth0" Bind socket to interface: No such device Failed to bring up eth0. [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[ ok 8[?25h[?0c. [....] Starting web server: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [?25l[?1c7[ ok 8[?25h[?0c. [....] Starting periodic command scheduler: cron[?25l[?1c7[ ok 8[?25h[?0c. [....] Starting system message bus: dbus[?25l[?1c7[ ok 8[?25h[?0c. [....] Loading cpufreq kernel modules...[?25l[?1c7[ ok 8[?25h[?0cdone (none). [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[ ok 8[?25h[?0c.

[PYBOOT] [snow 03:42]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snow 03:43]: got exception: timeout ~$off

[PYBOOT] [snow 03:44]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.954010] can: controller area network core (rev 20120528 abi 9) [ 1.960266] NET: Registered protocol family 29 [ 1.964721] can: raw protocol (rev 20120528) [ 1.969024] can: broadcast manager protocol (rev 20120528 t) [ 1.974670] can: netlink gateway (rev 20130117) max_hops=1 [ 1.980712] Key type dns_resolver registered [ 1.985229] ThumbEE CPU extension supported. [ 1.989532] Registering SWP/SWPB emulation handler [ 2.000366] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.007232] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.016448] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.023498] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.030487] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.037475] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.051422] db8500-esram12: disabling [ 2.055206] db8500-esram34: disabling [ 2.059234] V-CSI/DSI: disabling [ 2.062530] mmci-reg: disabling [ 2.066284] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.072265] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.078704] Waiting for root device /dev/mmcblk0p4... [ 2.115722] mmc3: new high speed MMC card at address 0001 [ 2.121704] mmcblk3: mmc3:0001 3.53 GiB [ 2.125976] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.131622] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.137268] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.143768] mmcblk3: p1 p2 p3 p4 Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.

Disconnected.

[PYBOOT] [snowball 02:02]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:03]: got exception: timeout ~$off

[PYBOOT] [snowball 02:05]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.898071] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.905578] ledtrig-cpu: registered to indicate activity on CPUs [ 1.911834] usbcore: registered new interface driver usbhid [ 1.917388] usbhid: USB HID core driver [ 1.924682] NET: Registered protocol family 10 [ 1.980010] sit: IPv6 over IPv4 tunneling driver [ 1.985168] NET: Registered protocol family 17 [ 1.989654] can: controller area network core (rev 20120528 abi 9) [ 1.995880] NET: Registered protocol family 29 [ 2.000335] can: raw protocol (rev 20120528) [ 2.004608] can: broadcast manager protocol (rev 20120528 t) [ 2.010253] can: netlink gateway (rev 20130117) max_hops=1 [ 2.016174] Key type dns_resolver registered [ 2.020629] ThumbEE CPU extension supported. [ 2.074981] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.089660] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.098754] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.105743] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.112731] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.119689] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.131378] db8500-esram12: disabling [ 2.179168] db8500-esram34: disabling [ 2.208923] V-CSI/DSI: disabling [ 2.213134] mmci-reg: disabling [ 2.224761] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.230712] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.244873] Waiting for root device /dev/mmcblk0p4... [ 3.040924] mmc3: new high speed MMC card at address 0001 [ 3.054748] mmcblk3: mmc3:0001 3.53 GiB [ 3.058898] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 3.074401] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 3.079925] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 3.095733] mmcblk3: p1 p2 p3 p4

[PYBOOT] [snowball 01:55]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 01:56]: got exception: timeout ~$off

[PYBOOT] [snowball 01:58]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------

[ 2.664001] iio iio:device1: registered pressure sensor lps001wp [ 2.672302] coresight-tpiu 80190000.tpiu: TPIU initialized [ 2.680114] coresight-etb10 801a4000.etb: ETB initialized [ 2.687347] coresight-funnel 801a6000.funnel: FUNNEL initialized [ 2.695465] coresight-replicator soc:replicator: REPLICATOR initialized [ 2.737274] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.748291] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.764862] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.775726] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.812561] NET: Registered protocol family 10 [ 2.820037] sit: IPv6 over IPv4 tunneling driver [ 2.827636] NET: Registered protocol family 17 [ 2.832702] NET: Registered protocol family 35 [ 2.837432] NET: Registered protocol family 37 [ 2.842529] Registering SWP/SWPB emulation handler [ 2.861877] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.868072] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.874694] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.887207] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-14 19:30:05 UTC (955740605) [ 2.901000] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.907989] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.915008] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.922058] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.936218] db8500-esram12: disabling [ 2.940063] db8500-esram34: disabling [ 2.944091] V-CSI/DSI: disabling [ 2.947357] mmci-reg: disabling [ 2.950714] ALSA device list: [ 2.953674] #0: MOP500-card [ 2.957031] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.963043] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.969299] Waiting for root device /dev/mmcblk0p4... [ 79.500762] random: nonblocking pool is initialized

[PYBOOT] [snowball 01:53]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 01:54]: got exception: timeout ~$off

[PYBOOT] [snowball 01:55]: Done. Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: INIT: cannot execute "/sbin/getty"Id "1" respawning too fast: disabled for 5 minutes

cannot execute "/sbin/getty"INIT: cannot execute "/sbin/getty"INIT:

INIT: Id "4" respawning too fast: disabled for 5 minutes INIT: Id "3[ 20.130509] mmcblk0: error -110 sending status command, retrying " respawning too fast: disabled f[ 20.141760] mmcblk0: error -110 sending status command, retrying or 5 minutes [ 20.150616] mmcblk0: error -110 sending status command, aborting [ 20.161693] mmcblk0: error -110 sending status command, retrying [ 20.170160] mmcblk0: error -110 sending status command, retrying [ 20.178625] mmcblk0: error -110 sending status command, aborting INIT: INIT: cannot execute "/sbin/gett[ 20.189934] mmcblk0: error -110 sending status command, retrying y" cannot execute "/sbin/getty"[ 20.198690] mmcblk0: error -110 sending status command, retrying

INIT: Id "S1" respawning too [ 20.207561] mmcblk0: error -110 sending status command, aborting fast: disabled for 5 minutes [ 20.219204] mmcblk0: error -110 sending status command, retrying [ 20.227665] mmcblk0: error -110 sending status command, retrying [ 20.236118] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: INIT: cannot execute "/sbin/getty"Id "6" respawning too fast: disabled for 5 minutes

[ 20.273072] mmcblk0: error -110 sending status command, retrying [ 20.281561] mmcblk0: error -110 sending status command, retrying [ 20.290019] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: Id "5" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 47.005098] random: nonblocking pool is initialized

[PYBOOT] [wandboard 02:55]: Timed out waiting for "<type 'str'>":

[PYBOOT] [wandboard 02:56]: got exception: timeout ~$off

[PYBOOT] [wandboard 02:57]: Done.