Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v3.19-rc7-22-gdc6d684/
Failed boards:
capri arm-bcm_defconfig : FAILED 0:26.11 capri arm-multi_v7_defconfig : FAILED 0:35.49 rk3288evb arm-multi_v7_defconfig : FAILED 2:02.21 rk3288evb arm-multi_lpae_defconfig : FAILED 1:47.30
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:24.26 arndale arm-exynos_defconfig : passed 1:27.89 arndale arm-multi_v7_defconfig : passed 1:27.41 arndale arm-multi_lpae_defconfig : passed 1:29.19 bbb arm-omap2plus_defconfig : passed 1:26.73 bbb arm-multi_v7_defconfig : passed 1:25.66 beaver arm-tegra_defconfig : passed 1:02.70 beaver arm-multi_v7_defconfig : passed 1:12.77 chitra powerpc-pasemi_defconfig : passed 1:02.37 chitra powerpc-ppc64_defconfig : passed 1:01.28 colombus arm-sunxi_defconfig : passed 0:59.45 colombus arm-multi_v7_defconfig : passed 1:13.41 colombus arm-multi_lpae_defconfig : passed 1:05.26 cosmic arm-imx_v6_v7_defconfig : passed 1:54.07 cosmic arm-multi_v7_defconfig : passed 1:44.96 cubie arm-sunxi_defconfig : passed 0:57.31 cubie arm-multi_v7_defconfig : passed 1:14.93 cubie2 arm-sunxi_defconfig : passed 0:57.20 cubie2 arm-multi_v7_defconfig : passed 1:09.84 cubie2 arm-multi_lpae_defconfig : passed 1:07.14 cubox arm-multi_v7_defconfig : passed 1:13.06 cubox arm-mvebu_v7_defconfig : passed 1:22.51 dalmore arm-tegra_defconfig : passed 1:21.42 dalmore arm-multi_v7_defconfig : passed 1:34.78 dalmore arm-multi_lpae_defconfig : passed 1:26.45 hummingboard arm-imx_v6_v7_defconfig : passed 1:41.01 hummingboard arm-multi_v7_defconfig : passed 1:18.29 jetsontk1 arm-tegra_defconfig : passed 0:58.01 jetsontk1 arm-multi_v7_defconfig : passed 1:02.16 jetsontk1 arm-multi_lpae_defconfig : passed 1:12.52 minnowmax x86-minnowmax_defconfig : passed 1:36.26 odroidu3 arm-exynos_defconfig : passed 1:14.22 omap5uevm arm-omap2plus_defconfig : passed 1:02.30 omap5uevm arm-multi_v7_defconfig : passed 1:18.96 omap5uevm arm-multi_lpae_defconfig : passed 1:22.53 pandaes arm-omap2plus_defconfig : warnings 1:38.15 pandaes arm-multi_v7_defconfig : passed 1:41.87 parallella arm-multi_v7_defconfig : passed 1:21.15 pi arm-exynos_defconfig : passed 0:57.65 pi arm-multi_v7_defconfig : passed 0:54.54 pi arm-multi_lpae_defconfig : passed 1:06.03 pit arm-exynos_defconfig : passed 0:55.54 pit arm-multi_v7_defconfig : passed 0:48.97 pit arm-multi_lpae_defconfig : passed 1:09.19 sama5 arm-sama5_defconfig : passed 1:56.90 seaboard arm-tegra_defconfig : passed 1:02.60 seaboard arm-multi_v7_defconfig : passed 1:02.72 snow arm-exynos_defconfig : passed 1:06.70 snow arm-multi_v7_defconfig : passed 1:07.05 snow arm-multi_lpae_defconfig : passed 0:59.68 snowball arm-u8500_defconfig : passed 2:14.81 snowball arm-multi_v7_defconfig : passed 3:37.54 socfpga arm-socfpga_defconfig : passed 1:32.13 socfpga arm-multi_v7_defconfig : passed 1:24.50 trimslice arm-tegra_defconfig : passed 1:06.66 trimslice arm-multi_v7_defconfig : passed 1:02.78 wandboard arm-imx_v6_v7_defconfig : passed 1:01.32 wandboard arm-multi_v7_defconfig : passed 1:04.47
Offline boards:
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board capri-arm-bcm_defconfig failure log: -------------------------------------------------
[ 0.970000] df20: 00000000 c04c1e98 60000013 00000000 c0487598 ef200e7f ef200e74 c0034abc [ 0.970000] df40: c04322f8 ef200e83 00000006 00000006 c04c1e80 c04b1470 c04b15f4 00000006 [ 0.970000] df60: c04ab61c c04d9f80 c04d9f80 c04ab624 00000000 c0487da4 00000006 00000006 [ 0.970000] df80: c0487598 c0038f4c 00000000 c036a41c 00000000 00000000 00000000 00000000 [ 0.970000] dfa0: 00000000 c036a424 00000000 c000e680 00000000 00000000 00000000 00000000 [ 0.970000] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 0.970000] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 a080c085 c2c9e180 [ 0.970000] [<c0116744>] (insert_header) from [<c01177ec>] (__register_sysctl_table+0x348/0x5f0) [ 0.970000] [<c01177ec>] (__register_sysctl_table) from [<c04a4218>] (sysctl_ipv4_init+0x20/0x54) [ 0.970000] [<c04a4218>] (sysctl_ipv4_init) from [<c0008910>] (do_one_initcall+0x8c/0x1d4) [ 0.970000] [<c0008910>] (do_one_initcall) from [<c0487da4>] (kernel_init_freeable+0x144/0x1e4) [ 0.970000] [<c0487da4>] (kernel_init_freeable) from [<c036a424>] (kernel_init+0x8/0xe8) [ 0.970000] [<c036a424>] (kernel_init) from [<c000e680>] (ret_from_fork+0x14/0x34) [ 0.970000] Code: e5922000 e063300b e1a03243 e0833183 (e792a103) [ 0.980000] ---[ end trace b666ec3914dafca0 ]--- [ 0.980000] note: swapper/0[1] exited with preempt_count 1 [ 0.990000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 0.990000] [ 0.990000] CPU1: stopping [ 0.990000] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.19.0-rc7+ #1 [ 0.990000] Hardware name: BCM281xx Broadcom Application Processor [ 0.990000] [<c00143dc>] (unwind_backtrace) from [<c001148c>] (show_stack+0x10/0x14) [ 0.990000] [<c001148c>] (show_stack) from [<c036c5c8>] (dump_stack+0x84/0xc4) [ 0.990000] [<c036c5c8>] (dump_stack) from [<c00135fc>] (handle_IPI+0x17c/0x18c) [ 0.990000] [<c00135fc>] (handle_IPI) from [<c0008660>] (gic_handle_irq+0x58/0x5c) [ 0.990000] [<c0008660>] (gic_handle_irq) from [<c0011fc0>] (__irq_svc+0x40/0x74) [ 0.990000] Exception stack(0xeec87f78 to 0xeec87fc0) [ 0.990000] 7f60: ffffffed 00000000 [ 0.990000] 7f80: 00000408 c0018f00 eec86000 c04bc4a8 c0372750 00000000 00000000 00000000 [ 0.990000] 7fa0: ffffffed 00000000 c04bd00c eec87fc0 c000f154 c000f158 60000153 ffffffff [ 0.990000] [<c0011fc0>] (__irq_svc) from [<c000f158>] (arch_cpu_idle+0x38/0x3c) [ 0.990000] [<c000f158>] (arch_cpu_idle) from [<c004d9fc>] (cpu_startup_entry+0x230/0x2dc) [ 0.990000] [<c004d9fc>] (cpu_startup_entry) from [<90008704>] (0x90008704) [ 0.990000] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 0.990000]
[PYBOOT] [capri 00:24]: got exception: panic ~$off
[PYBOOT] [capri 00:25]: Done.
========================================================================
Board capri-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 0.760000] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 c0c0c0c0 c0c0c0c0 [ 0.760000] [<c05c9df4>] (dev_uevent) from [<c046f33c>] (kobject_uevent_env+0x1d4/0x4ec) [ 0.760000] [<c046f33c>] (kobject_uevent_env) from [<c05c9894>] (device_add+0x390/0x520) [ 0.760000] [<c05c9894>] (device_add) from [<c05c9bb0>] (device_create_groups_vargs+0xac/0xbc) [ 0.760000] [<c05c9bb0>] (device_create_groups_vargs) from [<c05c9be0>] (device_create_vargs+0x20/0x28) [ 0.760000] [<c05c9be0>] (device_create_vargs) from [<c02d44a0>] (bdi_register+0x58/0xf0) [ 0.760000] [<c02d44a0>] (bdi_register) from [<c02d455c>] (bdi_register_dev+0x24/0x2c) [ 0.760000] [<c02d455c>] (bdi_register_dev) from [<c045e2e0>] (add_disk+0x130/0x440) [ 0.760000] [<c045e2e0>] (add_disk) from [<c05e6334>] (loop_add+0x16c/0x1d8) [ 0.760000] [<c05e6334>] (loop_add) from [<c0cbae54>] (loop_init+0xf0/0x12c) [ 0.760000] [<c0cbae54>] (loop_init) from [<c0208cd0>] (do_one_initcall+0x8c/0x1d4) [ 0.760000] [<c0208cd0>] (do_one_initcall) from [<c0c78db8>] (kernel_init_freeable+0x148/0x1e8) [ 0.760000] [<c0c78db8>] (kernel_init_freeable) from [<c092d398>] (kernel_init+0x8/0xe8) [ 0.760000] [<c092d398>] (kernel_init) from [<c020e8c0>] (ret_from_fork+0x14/0x34) [ 0.760000] Code: bad PC value [ 0.765000] ---[ end trace c3e27cff6b0f328e ]--- [ 0.765000] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 0.765000] [ 0.765000] CPU1: stopping [ 0.765000] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 3.19.0-rc7-00022-gdc6d684 #1 [ 0.765000] Hardware name: BCM281xx Broadcom Application Processor [ 0.765000] [<c021627c>] (unwind_backtrace) from [<c0211c90>] (show_stack+0x10/0x14) [ 0.765000] [<c0211c90>] (show_stack) from [<c093052c>] (dump_stack+0x8c/0x9c) [ 0.765000] [<c093052c>] (dump_stack) from [<c0214a74>] (handle_IPI+0x150/0x170) [ 0.765000] [<c0214a74>] (handle_IPI) from [<c020899c>] (gic_handle_irq+0x64/0x68) [ 0.765000] [<c020899c>] (gic_handle_irq) from [<c0212800>] (__irq_svc+0x40/0x54) [ 0.765000] Exception stack(0xea883f80 to 0xea883fc8) [ 0.765000] 3f80: ffffffed 00000000 ffffffed c021f820 c0d4049c c0d40500 00000000 00000000 [ 0.765000] 3fa0: ea882000 ea883fd0 c093e658 00000000 c0d41c7c ea883fc8 c020f380 c020f384 [ 0.765000] 3fc0: 60000153 ffffffff [ 0.765000] [<c0212800>] (__irq_svc) from [<c020f384>] (arch_cpu_idle+0x38/0x3c) [ 0.765000] [<c020f384>] (arch_cpu_idle) from [<c0275f9c>] (cpu_startup_entry+0x194/0x268) [ 0.765000] [<c0275f9c>] (cpu_startup_entry) from [<90208ac4>] (0x90208ac4) [ 0.765000] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 0.765000]
[PYBOOT] [capri 00:33]: got exception: panic ~$off
[PYBOOT] [capri 00:34]: Done.
========================================================================
Board rk3288evb-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.296705] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.297037] backlight supply power not found, using dummy regulator [ 1.297078] pwm-backlight backlight: unable to request PWM, trying legacy API [ 1.297083] pwm-backlight backlight: unable to request legacy PWM [ 1.297127] platform backlight: Driver pwm-backlight requests probe deferral [ 1.305685] ALSA device list: [ 1.305687] No soundcards found. [ 1.346058] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 1.450591] mc_host mmc0: Bus speed (slot 0) = 25000000Hz (slot req 25000000Hz, actual 25000000HZ div = 0) [ 1.460538] of_dma_request_slave_channel: dma-names property of node '/serial@ff690000' missing or empty [ 1.460588] mmc0: new SD card at address b368 [ 1.471411] mmcblk0: mmc0:b368 SMI-S 1.00 GiB [ 1.477405] mmcblk0: unknown partition table [ 1.480263] backlight supply power not found, using dummy regulator [ 1.480471] pwm-backlight backlight: unable to request PWM, trying legacy API [ 1.480497] pwm-backlight backlight: unable to request legacy PWM [ 1.480722] platform backlight: Driver pwm-backlight requests probe deferral [ 1.510074] ttyS2 - failed to request DMA [ 1.514408] Waiting for root device PARTUUID=888FC55C-FA4D-4AA0-AE67-7CCB9287893C... [ 1.519039] mmc1: BKOPS_EN bit is not set [ 1.520581] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 1.521762] mmc1: new high speed MMC card at address 0001 [ 1.521960] mmcblk1: mmc1:0001 M8G1GC 7.28 GiB [ 1.522013] mmcblk1boot0: mmc1:0001 M8G1GC partition 1 4.00 MiB [ 1.522064] mmcblk1boot1: mmc1:0001 M8G1GC partition 2 4.00 MiB [ 1.525698] mmcblk1: p1 [ 1.526793] backlight supply power not found, using dummy regulator [ 1.526823] pwm-backlight backlight: unable to request PWM, trying legacy API [ 1.526827] pwm-backlight backlight: unable to request legacy PWM [ 1.526860] platform backlight: Driver pwm-backlight requests probe deferral [ 1.587140] EXT4-fs (mmcblk1p1): couldn't mount as ext3 due to feature incompatibilities [ 1.595653] EXT4-fs (mmcblk1p1): couldn't mount as ext2 due to feature incompatibilities [ 1.609966] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null) [ 1.618073] VFS: Mounted root (ext [PYBOOT] [rk3288evb 01:44]: Timed out waiting for "<type 'str'>":
[PYBOOT] [rk3288evb 01:45]: got exception: timeout ~$off
[PYBOOT] [rk3288evb 01:46]: Done.
========================================================================
Board rk3288evb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.331205] can: controller area network core (rev 20120528 abi 9) [ 1.337415] NET: Registered protocol family 29 [ 1.341867] can: raw protocol (rev 20120528) [ 1.346138] can: broadcast manager protocol (rev 20120528 t) [ 1.351799] can: netlink gateway (rev 20130117) max_hops=1 [ 1.354902] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 1.354936] mmc0: new high speed SDHC card at address b368 [ 1.355134] mmcblk0: mmc0:b368 00000 7.51 GiB [ 1.362287] mmcblk0: p1 p2 p3 [ 1.380196] Key type dns_resolver registered [ 1.384545] ThumbEE CPU extension supported. [ 1.388824] Registering SWP/SWPB emulation handler [ 1.393749] usb 1-1: new high-speed USB device number 2 using ehci-platform [ 1.394816] backlight supply power not found, using dummy regulator [ 1.394849] pwm-backlight backlight: unable to request PWM, trying legacy API [ 1.394853] pwm-backlight backlight: unable to request legacy PWM [ 1.394895] platform backlight: Driver pwm-backlight requests probe deferral [ 1.395735] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 1.395885] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.396294] backlight supply power not found, using dummy regulator [ 1.396327] pwm-backlight backlight: unable to request PWM, trying legacy API [ 1.396330] pwm-backlight backlight: unable to request legacy PWM [ 1.396367] platform backlight: Driver pwm-backlight requests probe deferral [ 1.402598] ALSA device list: [ 1.402600] No soundcards found. [ 1.403604] mmc1: BKOPS_EN bit is not set [ 1.404878] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 1.404997] mmc1: new high speed MMC card at address 0001 [ 1.405237] mmcblk1: mmc1:0001 M8G1GC 7.28 GiB [ 1.405305] mmcblk1boot0: mmc1:0001 M8G1GC partition 1 4.00 MiB [ 1.405370] mmcblk1boot1: mmc1:0001 M8G1GC partition 2 4.00 MiB [ 1.409063] mmcblk1: p1 [ 1.410238] backlight supply power not found, using dummy regulator [ 1.410271] pwm-back [PYBOOT] [rk3288evb 01:59]: Timed out waiting for "<type 'str'>":
[PYBOOT] [rk3288evb 02:00]: got exception: timeout ~$off
[PYBOOT] [rk3288evb 02:01]: Done.
kernel-build-reports@lists.linaro.org
-
Olof's autobooter