Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-1278-g1649098/

Failed boards:

arndale multi_v7_nosmp_defconfig : NO BUILD bbb arm-omap2plus_defconfig : FAILED 1:54.40 bbb arm-multi_v7_defconfig : FAILED 1:53.97 bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:43.97 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:46.37 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:54.50 beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.68 cosmic arm-multi_v7_defconfig : FAILED 2:11.13 cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore arm-tegra_defconfig : FAILED 1:49.06 dalmore arm-multi_v7_defconfig : FAILED 1:59.14 dalmore arm-multi_lpae_defconfig : FAILED 2:00.43 dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:53.35 omap5uevm arm-omap2plus_defconfig : FAILED 2:04.20 omap5uevm arm-multi_v7_defconfig : FAILED 2:05.36 omap5uevm arm-multi_lpae_defconfig : FAILED 2:07.23 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-multi_v7_defconfig : FAILED 1:59.39 pi arm-multi_lpae_defconfig : FAILED 1:55.68 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball arm-u8500_defconfig : FAILED 1:55.46 snowball arm-multi_v7_defconfig : FAILED 2:11.87 snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard arm-imx_v6_v7_defconfig : FAILED 2:58.32 wandboard multi_v7_nosmp_defconfig : NO BUILD

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:13.23 arndale arm-exynos_defconfig : passed 1:33.39 arndale arm-multi_v7_defconfig : passed 1:28.88 arndale arm-multi_lpae_defconfig : passed 1:21.86 capri arm-bcm_defconfig : passed 0:48.29 capri arm-multi_v7_defconfig : passed 0:54.69 chitra powerpc-ppc64_defconfig : passed 2:08.53 colombus arm-sunxi_defconfig : passed 2:31.91 colombus arm-multi_v7_defconfig : passed 2:35.58 colombus arm-multi_lpae_defconfig : passed 2:33.68 cubie arm-sunxi_defconfig : passed 0:56.86 cubie arm-multi_v7_defconfig : passed 0:58.83 cubie2 arm-sunxi_defconfig : passed 0:48.90 cubie2 arm-multi_v7_defconfig : passed 0:55.72 cubie2 arm-multi_lpae_defconfig : passed 1:00.10 cubox arm-multi_v7_defconfig : passed 1:02.36 cubox arm-mvebu_v7_defconfig : passed 1:11.21 hummingboard arm-imx_v6_v7_defconfig : passed 1:28.86 hummingboard arm-multi_v7_defconfig : passed 1:20.13 jetsontk1 arm-tegra_defconfig : passed 1:39.16 jetsontk1 arm-multi_v7_defconfig : passed 1:40.19 jetsontk1 arm-multi_lpae_defconfig : passed 1:34.73 pandaes arm-omap2plus_defconfig : warnings 1:30.84 pandaes arm-multi_v7_defconfig : passed 1:50.10 pi arm-exynos_defconfig : passed 2:12.52 pit arm-exynos_defconfig : passed 2:13.02 pit arm-multi_v7_defconfig : passed 2:16.86 pit arm-multi_lpae_defconfig : passed 2:11.88 seattle arm64-defconfig : warnings 2:14.49 snow arm-exynos_defconfig : passed 2:07.08 snow arm-multi_v7_defconfig : passed 2:00.33 snow arm-multi_lpae_defconfig : passed 1:58.15 trimslice arm-tegra_defconfig : passed 2:38.32 trimslice arm-multi_v7_defconfig : passed 1:43.15 wandboard arm-multi_v7_defconfig : passed 1:05.19

Offline boards:

beaver arm-tegra_defconfig : OFFLINE 2:12.10 beaver arm-multi_v7_defconfig : OFFLINE 2:20.61 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 2:13.01 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 2:19.31 parallella arm-multi_v7_defconfig : OFFLINE 2:23.57 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:49.92 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:57.56 sama5 arm-sama5_defconfig : OFFLINE 2:23.57 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:19.24 seaboard arm-tegra_defconfig : OFFLINE 2:13.92 seaboard arm-multi_v7_defconfig : OFFLINE 2:14.31 socfpga arm-socfpga_defconfig : OFFLINE 2:22.71 socfpga arm-multi_v7_defconfig : OFFLINE 2:25.31

Board legend is available at http://arm-soc.lixom.net/boards.html

Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.558555] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.623764] Synopsys Designware Multimedia Card Interface Driver [ 1.631671] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.641835] ledtrig-cpu: registered to indicate activity on CPUs [ 1.648891] usbcore: registered new interface driver usbhid [ 1.654816] usbhid: USB HID core driver [ 1.666894] NET: Registered protocol family 10 [ 1.673470] sit: IPv6 over IPv4 tunneling driver [ 1.679620] NET: Registered protocol family 17 [ 1.684388] can: controller area network core (rev 20120528 abi 9) [ 1.691027] NET: Registered protocol family 29 [ 1.695744] can: raw protocol (rev 20120528) [ 1.700263] can: broadcast manager protocol (rev 20120528 t) [ 1.706255] can: netlink gateway (rev 20130117) max_hops=1 [ 1.713010] Key type dns_resolver registered [ 1.717911] omap_voltage_late_init: Voltage driver support not added [ 1.724896] ThumbEE CPU extension supported. [ 1.729459] Registering SWP/SWPB emulation handler [ 1.773786] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.780349] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.788080] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.796770] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.804705] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.812564] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.820387] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.827739] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.834863] hctosys: unable to open rtc device (rtc0) [ 1.848255] Waiting for root device /dev/mmcblk0p2... [ 1.853997] mmc1: new high speed MMC card at address 0001 [ 1.860784] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.866069] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.872725] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.881332] mmcblk1: p1 p2

[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:52]: got exception: timeout ~$off

[PYBOOT] [bbb 01:53]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.064652] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.070780] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.077118] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.084004] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.093613] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.103126] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.110153] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.153433] ledtrig-cpu: registered to indicate activity on CPUs [ 2.162162] oprofile: using arm/armv7 [ 2.167281] Initializing XFRM netlink socket [ 2.172392] NET: Registered protocol family 10 [ 2.183375] sit: IPv6 over IPv4 tunneling driver [ 2.192199] NET: Registered protocol family 17 [ 2.197155] NET: Registered protocol family 15 [ 2.202410] Key type dns_resolver registered [ 2.207296] omap_voltage_late_init: Voltage driver support not added [ 2.214046] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.222524] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.232167] ThumbEE CPU extension supported. [ 2.236818] Registering SWP/SWPB emulation handler [ 2.241867] SmartReflex Class3 initialized [ 2.312156] mmc1: new high speed MMC card at address 0001 [ 2.325221] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.334869] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.346069] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.361808] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.369192] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.381231] mmcblk1: p1 p2 [ 2.389374] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.409013] hctosys: unable to open rtc device (rtc0) [ 2.414546] sr_init: No PMIC hook to init smartreflex [ 2.420240] sr_init: platform driver register failed for SR [ 2.463928] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:52]: got exception: timeout ~$off

[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.731213] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.745935] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.753006] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.775605] rtc-ds1307 2-006f: SET TIME! [ 1.781362] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.788113] rtc-ds1307 2-006f: 64 bytes nvram [ 1.792728] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.800922] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.806713] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.814958] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.824117] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.830981] hub 1-0:1.0: USB hub found [ 1.834933] hub 1-0:1.0: 1 port detected [ 1.839342] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.845116] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.853217] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.862229] hub 2-0:1.0: USB hub found [ 1.866194] hub 2-0:1.0: 1 port detected [ 1.872217] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.936695] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.954701] aic_dvdd_fixed: disabling [ 1.959420] Waiting for root device /dev/mmcblk0p1... [ 1.987178] mmc1: new high speed MMC card at address 0001 [ 1.993194] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.998105] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.004461] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.011389] mmcblk1: p1 [ 2.145105] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.180136] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.205357] hub 2-1:1.0: USB hub found [ 2.209322] hub 2-1:1.0: 4 ports detected [ 2.301361] hub 1-1:1.0: USB hub found [ 2.305352] hub 1-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:52]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:53]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.721929] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.736724] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.743810] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.770628] rtc-ds1307 2-006f: SET TIME! [ 1.776419] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.783168] rtc-ds1307 2-006f: 64 bytes nvram [ 1.787775] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.795984] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.801769] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.810016] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.819177] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.826045] hub 1-0:1.0: USB hub found [ 1.830001] hub 1-0:1.0: 1 port detected [ 1.834411] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.840191] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.848298] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.857308] hub 2-0:1.0: USB hub found [ 1.861276] hub 2-0:1.0: 1 port detected [ 1.867320] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.931633] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.949264] aic_dvdd_fixed: disabling [ 1.953996] Waiting for root device /dev/mmcblk0p1... [ 1.977207] mmc1: new high speed MMC card at address 0001 [ 1.983246] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.988150] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.994507] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.001424] mmcblk1: p1 [ 2.140119] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.175151] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.200434] hub 2-1:1.0: USB hub found [ 2.204403] hub 2-1:1.0: 4 ports detected [ 2.296439] hub 1-1:1.0: USB hub found [ 2.300428] hub 1-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 01:43]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:44]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:45]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.218856] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.225174] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.232047] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.242446] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.247313] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.253612] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.260469] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.270068] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.279565] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.286629] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.335378] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.341674] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.348543] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.358128] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.367640] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.374686] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.380816] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.387130] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.393973] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.403567] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.413061] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.420104] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.465467] hctosys: unable to open rtc device (rtc0) [ 2.470765] sr_init: No PMIC hook to init smartreflex [ 2.476275] sr_init: platform driver register failed for SR [ 2.517035] mmc1: new high speed MMC card at address 0001 [ 2.525117] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.525678] aic_dvdd_fixed: disabling [ 2.533980] ldousb: disabling [ 2.534513] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.535307] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.551215] mmcblk1: p1 [ 2.558757] Waiting for root device /dev/mmcblk0p1...

[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:43]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

[ 14.453641] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.527868] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.538194] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.612427] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.622756] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.696988] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.707319] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.781534] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.791864] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.866028] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.876358] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.950579] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.960910] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.035102] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.045429] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.119678] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.130002] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.204172] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.214496] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.288708] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.299031] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.373253] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.383578] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.457799] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.468121] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.542345] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.552667] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.626830] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.637152] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.711371] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.721698] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.795861] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.806188] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:01]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 14.081905] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.155895] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.165973] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.239956] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.250033] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.324012] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.334093] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.408079] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.418161] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.492149] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.502248] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.576280] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.586339] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.660333] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.670409] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.744398] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.754467] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.828454] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.838526] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.912508] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.922578] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.996562] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.006655] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.080642] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.090715] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.164696] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.174775] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.248756] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.258834] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.332816] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.342895] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.416881] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.426962] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 02:07]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:08]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:10]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.631674] can: netlink gateway (rev 20130117) max_hops=1 [ 2.638862] Key type dns_resolver registered [ 2.645304] ThumbEE CPU extension supported. [ 2.649734] Registering SWP/SWPB emulation handler [ 2.668857] usb1_vbus: supplied by vdd-sys-5v0 [ 2.692380] usb2_vbus: supplied by vdd-sys-5v0 [ 2.709099] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.731234] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.738111] [drm] No driver support for vblank timestamp query. [ 2.768922] mmc1: new high speed MMC card at address 0001 [ 2.777806] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.783539] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.792109] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.801767] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.811478] mmcblk1: p1 [ 2.921097] Console: switching to colour frame buffer device 240x75 [ 3.008552] drm drm: fb0: frame buffer device [ 3.032892] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.047737] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.053323] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.062122] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.077932] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.088320] hub 1-0:1.0: USB hub found [ 3.092353] hub 1-0:1.0: 1 port detected [ 3.103237] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.117322] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.179397] dvdd_ts: disabling [ 3.182499] usb1_vbus: disabling [ 3.185877] vdd_cam_1v8_reg: disabling [ 3.193301] Waiting for root device /dev/mmcblk0p1... [ 3.402930] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.362994] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 55.872820] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:57]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:58]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:59]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.633025] can: netlink gateway (rev 20130117) max_hops=1 [ 2.640145] Key type dns_resolver registered [ 2.646619] ThumbEE CPU extension supported. [ 2.651043] Registering SWP/SWPB emulation handler [ 2.664615] usb1_vbus: supplied by vdd-sys-5v0 [ 2.672527] usb2_vbus: supplied by vdd-sys-5v0 [ 2.689510] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.711362] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.718147] [drm] No driver support for vblank timestamp query. [ 2.740300] mmc1: new high speed MMC card at address 0001 [ 2.747847] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.755044] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.764593] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.773670] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.783507] mmcblk1: p1 [ 2.895432] Console: switching to colour frame buffer device 240x75 [ 2.982841] drm drm: fb0: frame buffer device [ 3.007388] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.022258] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.027842] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.036528] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.052425] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.061798] hub 1-0:1.0: USB hub found [ 3.065909] hub 1-0:1.0: 1 port detected [ 3.075289] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.089398] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.151645] dvdd_ts: disabling [ 3.154865] usb1_vbus: disabling [ 3.158167] vdd_cam_1v8_reg: disabling [ 3.165555] Waiting for root device /dev/mmcblk0p1... [ 3.377737] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.351115] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 64.443699] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:56]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:57]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:58]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------

[ 2.916454] Bluetooth: RFCOMM socket layer initialized [ 2.921706] Bluetooth: RFCOMM ver 1.11 [ 2.925709] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.931108] Bluetooth: BNEP socket layer initialized [ 2.936215] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.942216] Bluetooth: HIDP socket layer initialized [ 2.948933] Key type dns_resolver registered [ 2.958549] Registering SWP/SWPB emulation handler [ 2.987204] usb1_vbus: supplied by vdd-sys-5v0 [ 2.996652] usb2_vbus: supplied by vdd-sys-5v0 [ 3.012278] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 3.039841] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.046797] [drm] No driver support for vblank timestamp query. [ 3.226413] Console: switching to colour frame buffer device 240x75 [ 3.313625] drm drm: fb0: frame buffer device [ 3.344486] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.353579] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.359436] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.369708] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.394501] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.408621] hub 1-0:1.0: USB hub found [ 3.412726] hub 1-0:1.0: 1 port detected [ 3.426203] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.442313] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.537837] dvdd_ts: disabling [ 3.540942] usb1_vbus: disabling [ 3.544330] vdd_cam_1v8_reg: disabling [ 3.548994] ALSA device list: [ 3.551986] #0: NVIDIA Tegra Dalmore [ 3.557941] Waiting for root device /dev/mmcblk0p1... [ 3.734507] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.768969] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 60.774478] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:45]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:46]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:47]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------

[ 1.809297] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 1.816096] dwmmc_exynos 12550000.mmc: DW MMC controller at irq 107,32 bit host data width,128 deep fifo [ 1.825725] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.857890] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.859043] usbcore: registered new interface driver usbhid [ 1.863295] usbhid: USB HID core driver [ 1.874038] NET: Registered protocol family 10 [ 1.874654] sit: IPv6 over IPv4 tunneling driver [ 1.877931] NET: Registered protocol family 17 [ 1.881889] NET: Registered protocol family 15 [ 1.886368] Key type dns_resolver registered [ 1.890694] Registering SWP/SWPB emulation handler [ 1.896531] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.901097] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.933429] max98090 1-0010: MAX98090 REVID=0x43 [ 1.935695] max98090 1-0010: use default 2.8v micbias [ 1.942908] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.945884] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.951640] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.960384] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.970110] mmc1: new DDR MMC card at address 0001 [ 1.975242] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.979304] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.985216] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.991074] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.996648] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 2.012368] mmcblk1: p1 p2 [ 2.014158] VDD10_HDMI_1.0V: disabling [ 2.018355] vdd_g3d: disabling [ 2.021354] BUCK8_2.8V: disabling [ 2.0r5366] ALSA device list: [ 2.026975] #0: Odroid-U3 [ 2.030635] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [odroidu3 01:50]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 01:51]: got exception: timeout ~$off

[PYBOOT] [odroidu3 01:52]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.978415] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.984982] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.993003] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.004092] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.012280] ldo9: bypassed regulator has no supply! [ 2.017403] ldo9: failed to get the current voltage(-517) [ 2.023072] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.037269] smsc95xx v1.0.4 [ 2.041216] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.065016] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.071399] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.088759] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, fe:47:af:6f:77:3c [ 2.107690] smps9: Bringing 0uV into 2100000-2100000uV [ 2.126421] ldo9: bypassed regulator has no supply! [ 2.131534] ldo9: failed to get the current voltage(-517) [ 2.137199] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.151209] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.177947] smps9: Bringing 0uV into 2100000-2100000uV [ 2.196768] ldo9: bypassed regulator has no supply! [ 2.201887] ldo9: failed to get the current voltage(-517) [ 2.207551] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.221970] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 05:33:51 UTC (946704831) [ 2.237585] pbias_mmc_omap5: disabling [ 2.241530] vmmcsdio_fixed: disabling [ 2.246082] Waiting for root device /dev/mmcblk1p2... [ 2.329255] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.465067] hub 1-2:1.0: USB hub found [ 2.469077] hub 1-2:1.0: 3 ports detected [ 2.474922] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.503016] smps9: Bringing 0uV into 2100000-2100000uV [ 2.521870] ldo9: bypassed regulator has no supply! [ 2.526988] ldo9: failed to get the current voltage(-517) [ 2.532653] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator

[PYBOOT] [omap5uevm 02:04]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:05]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:06]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.974817] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.981362] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.989399] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.000524] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.008663] smsc95xx v1.0.4 [ 2.012119] ldo9: bypassed regulator has no supply! [ 2.017238] ldo9: failed to get the current voltage(-517) [ 2.022900] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.038127] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.065012] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.071382] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.098426] smps9: Bringing 0uV into 2100000-2100000uV [ 2.104008] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 0e:d1:18:f0:81:b0 [ 2.129172] ldo9: bypassed regulator has no supply! [ 2.134301] ldo9: failed to get the current voltage(-517) [ 2.139973] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.153972] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.187863] smps9: Bringing 0uV into 2100000-2100000uV [ 2.206687] ldo9: bypassed regulator has no supply! [ 2.211806] ldo9: failed to get the current voltage(-517) [ 2.217472] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.231990] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 05:31:29 UTC (946704689) [ 2.247600] pbias_mmc_omap5: disabling [ 2.251540] vmmcsdio_fixed: disabling [ 2.256087] Waiting for root device /dev/mmcblk1p2... [ 2.369270] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.505110] hub 1-2:1.0: USB hub found [ 2.509124] hub 1-2:1.0: 3 ports detected [ 2.514909] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.543033] smps9: Bringing 0uV into 2100000-2100000uV [ 2.561872] ldo9: bypassed regulator has no supply! [ 2.566990] ldo9: failed to get the current voltage(-517) [ 2.572658] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator

[PYBOOT] [omap5uevm 02:01]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:02]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:04]: Done. Board omap5uevm-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.398293] ldo9: bypassed regulator has no supply! [ 2.403422] ldo9: failed to get the current voltage(-517) [ 2.409092] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.431881] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.439380] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.445950] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 2.452245] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.459118] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.468709] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.478212] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.485272] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 2.491387] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.497695] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.504552] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.514135] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.523629] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.530650] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.574179] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 2.580471] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 2.587337] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 2.596928] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 2.606422] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 2.613459] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 2.635062] smps9: Bringing 0uV into 2100000-2100000uV [ 2.664528] ldo9: bypassed regulator has no supply! [ 2.669632] ldo9: failed to get the current voltage(-517) [ 2.675314] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.695344] hctosys: unable to open rtc device (rtc0) [ 2.700639] sr_init: No PMIC hook to init smartreflex [ 2.706145] sr_init: platform driver register failed for SR [ 2.735964] pbias_mmc_omap5: disabling [ 2.739911] vmmcsdio_fixed: disabling [ 2.745936] Waiting for root device /dev/mmcblk1p2...

[PYBOOT] [omap5uevm 02:01]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:02]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:03]: Done. Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.522784] isl29018 7-0044: No cache defaults, reading back from HW [ 1.529129] isl29018 7-0044: Failed to read 1: -6 [ 1.533712] isl29018 7-0044: regmap initialization fails: -6 [ 1.543965] NET: Registered protocol family 10 [ 1.548406] sit: IPv6 over IPv4 tunneling driver [ 1.551986] NET: Registered protocol family 17 [ 1.555989] can: controller area network core (rev 20120528 abi 9) [ 1.562176] NET: Registered protocol family 29 [ 1.566567] can: raw protocol (rev 20120528) [ 1.570817] can: broadcast manager protocol (rev 20120528 t) [ 1.576459] can: netlink gateway (rev 20130117) max_hops=1 [ 1.582188] Key type dns_resolver registered [ 1.586506] ThumbEE CPU extension supported. [ 1.590408] Registering SWP/SWPB emulation handler [ 1.600216] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.605709] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.612066] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.617441] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.627521] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.637717] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.643158] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.653342] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.659525] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.664903] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.674627] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.696726] Waiting for root device /dev/mmcblk0p1... [ 1.700607] mmc0: tuning execution failed: -5 [ 1.704631] mmc0: error -5 whilst initialising MMC card [ 2.572644] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.586624] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.592085] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.598454] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.603838] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo

[PYBOOT] [pi 01:53]: Timed out waiting for "<type 'str'>":

[PYBOOT] [pi 01:54]: got exception: timeout ~$off

[PYBOOT] [pi 01:55]: Done. Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.522772] isl29018 7-0044: No cache defaults, reading back from HW [ 1.529119] isl29018 7-0044: Failed to read 1: -6 [ 1.533699] isl29018 7-0044: regmap initialization fails: -6 [ 1.543950] NET: Registered protocol family 10 [ 1.548394] sit: IPv6 over IPv4 tunneling driver [ 1.551974] NET: Registered protocol family 17 [ 1.555974] can: controller area network core (rev 20120528 abi 9) [ 1.562162] NET: Registered protocol family 29 [ 1.566553] can: raw protocol (rev 20120528) [ 1.570803] can: broadcast manager protocol (rev 20120528 t) [ 1.576445] can: netlink gateway (rev 20130117) max_hops=1 [ 1.582172] Key type dns_resolver registered [ 1.586494] ThumbEE CPU extension supported. [ 1.590394] Registering SWP/SWPB emulation handler [ 1.600217] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.605701] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.612060] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.617436] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.627515] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.637724] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.643170] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.653354] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.659537] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.664916] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.674637] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.696723] Waiting for root device /dev/mmcblk0p1... [ 1.700610] mmc0: tuning execution failed: -5 [ 1.704635] mmc0: error -5 whilst initialising MMC card [ 2.572584] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.586551] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.592009] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.598379] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.603763] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo

[PYBOOT] [pi 01:56]: Timed out waiting for "<type 'str'>":

[PYBOOT] [pi 01:57]: got exception: timeout ~$off

[PYBOOT] [pi 01:58]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.907226] ledtrig-cpu: registered to indicate activity on CPUs [ 1.914062] usbcore: registered new interface driver usbhid [ 1.919677] usbhid: USB HID core driver [ 1.934020] NET: Registered protocol family 10 [ 1.940124] sit: IPv6 over IPv4 tunneling driver [ 1.946014] NET: Registered protocol family 17 [ 1.950531] can: controller area network core (rev 20120528 abi 9) [ 1.956878] NET: Registered protocol family 29 [ 1.961364] can: raw protocol (rev 20120528) [ 1.965698] can: broadcast manager protocol (rev 20120528 t) [ 1.971405] can: netlink gateway (rev 20130117) max_hops=1 [ 1.977813] Key type dns_resolver registered [ 1.982482] ThumbEE CPU extension supported. [ 1.986846] Registering SWP/SWPB emulation handler [ 1.994628] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.001403] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.010650] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.017669] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.024658] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.031646] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.045013] db8500-esram12: disabling [ 2.048736] db8500-esram34: disabling [ 2.052703] V-CSI/DSI: disabling [ 2.055999] mmci-reg: disabling [ 2.059722] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.065704] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.072052] Waiting for root device /dev/mmcblk0p4... [ 2.085327] mmc3: new high speed MMC card at address 0001 [ 2.091308] mmcblk3: mmc3:0001 3.53 GiB [ 2.095520] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.101196] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.106811] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.113311] mmcblk3: p1 p2 p3 p4

[PYBOOT] [snowball 02:09]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:10]: got exception: timeout ~$off

[PYBOOT] [snowball 02:11]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------

[ 2.642822] iio iio:device1: registered pressure sensor lps001wp [ 2.649261] coresight-tpiu 80190000.tpiu: TPIU initialized [ 2.655456] coresight-etb10 801a4000.etb: ETB initialized [ 2.661224] coresight-funnel 801a6000.funnel: FUNNEL initialized [ 2.667602] coresight-replicator soc:replicator: REPLICATOR initialized [ 2.682373] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.693115] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.703033] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.713775] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.736541] NET: Registered protocol family 10 [ 2.741821] sit: IPv6 over IPv4 tunneling driver [ 2.747161] NET: Registered protocol family 17 [ 2.751678] NET: Registered protocol family 35 [ 2.756225] NET: Registered protocol family 37 [ 2.760803] Registering SWP/SWPB emulation handler [ 2.767181] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.773498] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.780212] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.787322] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-28 02:14:00 UTC (956888040) [ 2.796569] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.803588] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.810607] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.817565] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.831207] db8500-esram12: disabling [ 2.834930] db8500-esram34: disabling [ 2.838867] V-CSI/DSI: disabling [ 2.842163] mmci-reg: disabling [ 2.845458] ALSA device list: [ 2.848419] #0: MOP500-card [ 2.851776] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.857696] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.863891] Waiting for root device /dev/mmcblk0p4... [ 75.670776] random: nonblocking pool is initialized

[PYBOOT] [snowball 01:52]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 01:53]: got exception: timeout ~$off

[PYBOOT] [snowball 01:54]: Done. Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

INIT: cannot execute "/sbin/getty" I[ 19.910780] mmcblk0: error -110 sending status command, retrying NIT: Id "3" respawning too fast: [ 19.919373] mmcblk0: error -110 sending status command, retrying disabled for 5 minutes cannot e[ 19.928227] mmcblk0: error -110 sending status command, aborting xecute "/sbin/getty" INIT: Id "5" respawning too fast: disabled for 5 minutes INIT: INIT: cannot execute "/sbin/getty"INIT: cannot execute "/sbin/getty"ca[ 19.947805] mmcblk0: error -110 sending status command, retrying nnot execute "/sbin/getty" INI[ 19.959071] mmcblk0: error -110 sending status command, retrying T: cannot execute "/sbin/getty"[ 19.967901] mmcblk0: error -110 sending status command, aborting

INIT: Id "2" respawning too fast: disabled for 5 minutes [ 19.979379] mmcblk0: error -110 sending status command, retrying INIT: cannot execute "/sbin/getty[ 19.988521] mmcblk0: error -110 sending status command, retrying " INIT: Id "S1" respawning too[ 19.997290] mmcblk0: error -110 sending status command, aborting fast: disabled for 5 minutes INIT: cannot execute "/sbin/get[ 20.009020] mmcblk0: error -110 sending status command, retrying ty" [ 20.017734] mmcblk0: error -110 sending status command, retrying [ 20.026148] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/gett[ 20.037237] mmcblk0: error -110 sending status command, retrying y" INIT: Id "6" respawning too[ 20.046030] mmcblk0: error -110 sending status command, retrying fast: disabled for 5 minutes [ 20.054908] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty" INIT: Id "1" respawning too fast: disabled for 5 minutes INIT: Id "4" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 50.295126] random: nonblocking pool is initialized

[PYBOOT] [wandboard 02:55]: Timed out waiting for "<type 'str'>":

[PYBOOT] [wandboard 02:56]: got exception: timeout ~$off

[PYBOOT] [wandboard 02:57]: Done.