Full logs are available at http://arm-soc.lixom.net/bootlogs/arm-soc/v4.8-rc7-919-g2fd766d/

Failed boards:

arndale arm-multi_v7_nosmp_defconfig : FAILED 1:13.37 beaver arm-tegra_defconfig : FAILED 1:45.10 beaver arm-multi_v7_defconfig : FAILED 1:46.42 beaver arm-multi_v7_nosmp_defconfig : FAILED 1:54.94 capri bcm_defconfig : NO BUILD colombus arm-multi_v7_defconfig : FAILED 2:04.54 colombus arm-multi_lpae_defconfig : FAILED 2:06.31 colombus arm-multi_v7_nosmp_defconfig : FAILED 1:18.56 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 2:01.05 omap5uevm arm-multi_v7_defconfig : FAILED 0:46.76 omap5uevm arm-multi_lpae_defconfig : FAILED 0:49.38 pi arm-multi_v7_nosmp_defconfig : FAILED 1:50.06 pit arm-exynos_defconfig : FAILED 1:51.73 snow arm-multi_v7_nosmp_defconfig : FAILED 3:14.62 wandboard arm-imx_v6_v7_defconfig : FAILED 1:47.03 wandboard arm-multi_v7_defconfig : FAILED 1:53.95 wandboard arm-multi_v7_nosmp_defconfig : FAILED 2:01.21

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:11.18 arndale arm-exynos_defconfig : passed 1:31.84 arndale arm-multi_v7_defconfig : passed 1:33.60 arndale arm-multi_lpae_defconfig : passed 1:27.29 bbb arm-omap2plus_defconfig : passed 1:43.46 bbb arm-multi_v7_defconfig : passed 1:19.36 bbb arm-multi_v7_nosmp_defconfig : passed 1:17.42 beagleboard-x15 arm-omap2plus_defconfig : passed 0:52.14 beagleboard-x15 arm-multi_v7_defconfig : passed 0:51.22 beagleboard-x15 arm-multi_lpae_defconfig : passed 0:44.85 beagleboard-x15 arm-multi_v7_nosmp_defconfig : warnings 0:54.95 capri arm-multi_v7_defconfig : passed 0:50.89 capri arm-multi_v7_nosmp_defconfig : warnings 0:56.69 chitra powerpc-pasemi_defconfig : passed 1:45.73 chitra powerpc-ppc64_defconfig : passed 2:46.70 colombus arm-sunxi_defconfig : passed 2:09.50 cosmic arm-imx_v6_v7_defconfig : passed 3:20.99 cosmic arm-multi_v7_defconfig : passed 2:55.64 cosmic arm-multi_v7_nosmp_defconfig : passed 2:44.16 cubie arm-sunxi_defconfig : passed 0:52.49 cubie arm-multi_v7_defconfig : passed 0:51.73 cubie arm-multi_v7_nosmp_defconfig : passed 0:47.75 cubie2 arm-sunxi_defconfig : passed 0:49.44 cubie2 arm-multi_v7_defconfig : passed 0:54.84 cubie2 arm-multi_lpae_defconfig : passed 1:01.84 cubie2 arm-multi_v7_nosmp_defconfig : warnings 1:02.12 cubox arm-multi_v7_defconfig : passed 1:15.35 cubox arm-mvebu_v7_defconfig : passed 1:15.37 cubox arm-multi_v7_nosmp_defconfig : passed 1:04.88 jetsontk1 arm-tegra_defconfig : passed 0:50.46 jetsontk1 arm-multi_v7_defconfig : passed 0:46.19 jetsontk1 arm-multi_lpae_defconfig : passed 0:59.89 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 0:51.63 omap5uevm arm-omap2plus_defconfig : passed 1:07.52 omap5uevm arm-multi_v7_nosmp_defconfig : warnings 1:04.75 pandaes arm-omap2plus_defconfig : warnings 1:44.22 pandaes arm-multi_v7_defconfig : passed 1:35.16 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:43.13 pi arm-exynos_defconfig : passed 2:13.79 pi arm-multi_v7_defconfig : passed 2:15.98 pi arm-multi_lpae_defconfig : passed 2:14.46 pit arm-multi_v7_defconfig : passed 2:15.58 pit arm-multi_lpae_defconfig : passed 2:30.36 pit arm-multi_v7_nosmp_defconfig : warnings 2:13.27 seaboard arm-tegra_defconfig : passed 1:02.75 seaboard arm-multi_v7_defconfig : passed 1:06.29 seaboard arm-multi_v7_nosmp_defconfig : warnings 1:03.13 seattle arm64-defconfig : warnings 2:31.87 snow arm-exynos_defconfig : passed 2:14.30 snow arm-multi_v7_defconfig : passed 2:03.79 snow arm-multi_lpae_defconfig : passed 1:59.37 snowball arm-u8500_defconfig : passed 2:01.38 snowball arm-multi_v7_defconfig : passed 1:21.75 snowball arm-multi_v7_nosmp_defconfig : warnings 1:09.57 trimslice arm-multi_v7_defconfig : passed 3:01.85 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:34.04

Offline boards:

colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 2:15.77 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 2:30.15 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 2:16.39 dalmore arm-tegra_defconfig : OFFLINE 2:18.46 dalmore arm-multi_v7_defconfig : OFFLINE 2:22.54 dalmore arm-multi_lpae_defconfig : OFFLINE 2:26.82 dalmore arm-multi_v7_nosmp_defconfig : OFFLINE 2:18.77 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:32.46 hummingboard arm-multi_v7_defconfig : OFFLINE 2:22.32 hummingboard arm-multi_v7_nosmp_defconfig : OFFLINE 2:15.79 parallella arm-multi_v7_defconfig : OFFLINE 2:29.94 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:12.16 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:45.98 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:50.84 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:50.99 sama5 arm-sama5_defconfig : OFFLINE 2:17.94 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:27.80 socfpga arm-socfpga_defconfig : OFFLINE 2:23.20 socfpga arm-multi_v7_defconfig : OFFLINE 2:23.20 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:17.53 trimslice arm-tegra_defconfig : OFFLINE 2:17.63

Board legend is available at http://arm-soc.lixom.net/boards.html

Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 2.436058] mmcblk0: mmc0:0001 M4G1FA 3.73 GiB [ 2.441292] mmcblk0boot0: mmc0:0001 M4G1FA partition 1 1.00 MiB [ 2.448152] mmcblk0boot1: mmc0:0001 M4G1FA partition 2 1.00 MiB [ 2.452690] mmcblk0rpmb: mmc0:0001 M4G1FA partition 3 128 KiB [ 2.410248] MAIN_DC: disabling [ 2.411824] hdmi-en: disabling [ 2.415331] ahci 122f0000.sata: couldn't get PHY in node sata: -517 [ 2.459011] Unable to handle kernel paging request at virtual address c11c1ed8 [ 2.477844] pgd = c0204000 [ 2.480534] [c11c1ed8] *pgd=4100040e(bad) [ 2.484529] Internal error: Oops: 8000000d [#1] ARM [ 2.489388] Modules linked in: [ 2.492429] CPU: 0 PID: 0 Comm: swapper Tainted: G W 4.8.0-rc7-00919-g2fd766d #1 [ 2.500931] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 2.507008] task: c1106038 task.stack: c1100000 [ 2.511523] PC is at 0xc11c1ed8 [ 2.514650] LR is at cpu_pm_pmu_notify+0x70/0xb4 [ 2.519249] pc : [<c11c1ed8>] lr : [<c0a3984c>] psr: 600001d3 [ 2.519249] sp : c1101f88 ip : 00000000 fp : 000000a0 [ 2.530704] r10: 00000000 r9 : 00000001 r8 : c11c2a20 [ 2.535912] r7 : c11c29e0 r6 : c11c1ee0 r5 : 00000000 r4 : c110212c [ 2.542422] r3 : 00000006 r2 : 00000000 r1 : 00000006 r0 : 00000000 [ 2.548933] Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none [ 2.556223] Control: 10c53c7d Table: 40204059 DAC: 00000051 [ 2.561953] Process swapper (pid: 0, stack limit = 0xc1100218) [ 2.567768] Stack: (0xc1101f88 to 0xc1102000) [ 2.572112] 1f80: c1217961 c1102134 c11c1ee0 c11c2980 c1101fac c0b4ad60 [ 2.580271] 1fa0: c1100000 c110212c c1101fb4 c0b4af68 00000000 c035a34c ffffffff c1000c4c [ 2.588429] 1fc0: ffffffff ffffffff 00000000 c1000684 00000000 c1093a28 c12191d4 c11020b4 [ 2.596588] 1fe0: c1093a24 c1107224 40204059 410fc0f4 00000000 40208078 00000000 00000000 [ 2.604753] [<c0a3984c>] (cpu_pm_pmu_notify) from [<c0b4ad60>] (schedule+0x44/0x9c) [ 2.612388] Code: c11c1ec4 c11c2010 c11c2010 00000000 (c11c1ee0) [ 2.618462] ---[ end trace 0251d28383cef264 ]--- [ 2.623060] Kernel panic - not syncing: Attempted to kill the idle task! [ 2.629745] ---[ end Kernel panic - not syncing: Attempted to kill the idle task!

[PYBOOT] [arndale 01:11]: got exception: panic ~$off

[PYBOOT] [arndale 01:12]: Done. Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 3.298082] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.305039] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.311558] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.318526] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.324113] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.330821] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf097e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.340821] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.352656] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.359271] [drm] No driver support for vblank timestamp query. [ 3.365206] drm drm: No connectors reported connected with modes [ 3.371211] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.397099] Console: switching to colour frame buffer device 128x48 [ 3.409056] drm drm: fb0: frame buffer device [ 3.428964] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.439784] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.446252] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.451663] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.459483] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.478676] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.485742] hub 1-0:1.0: USB hub found [ 3.489513] hub 1-0:1.0: 1 port detected [ 3.494498] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.499910] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.507655] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.528687] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.535649] hub 2-0:1.0: USB hub found [ 3.539416] hub 2-0:1.0: 1 port detected [ 3.549177] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.562836] vdd_sata,avdd_plle: disabling [ 3.567548] usb1_vbus: disabling [ 3.571612] Waiting for root device /dev/mmcblk0p1... [ 3.873678] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.871269] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:43]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:44]: got exception: timeout ~$off

[PYBOOT] [beaver 01:45]: Done. Board beaver-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 3.242786] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.249739] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.256255] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.263193] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.268776] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.275358] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.285350] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.295617] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.302231] [drm] No driver support for vblank timestamp query. [ 3.308169] drm drm: No connectors reported connected with modes [ 3.314169] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.333587] Console: switching to colour frame buffer device 128x48 [ 3.345375] drm drm: fb0: frame buffer device [ 3.349813] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.359982] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.366437] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.371841] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.379561] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.398176] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.404514] hub 1-0:1.0: USB hub found [ 3.408278] hub 1-0:1.0: 1 port detected [ 3.413004] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.418413] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.426067] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.443172] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.449450] hub 2-0:1.0: USB hub found [ 3.453210] hub 2-0:1.0: 1 port detected [ 3.460672] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.473763] vdd_sata,avdd_plle: disabling [ 3.478147] usb1_vbus: disabling [ 3.482069] Waiting for root device /dev/mmcblk0p1... [ 3.783176] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.771765] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:52]: got exception: timeout ~$off

[PYBOOT] [beaver 01:54]: Done. Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------

[ 7.104249] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 7.111323] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 7.116923] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 7.124433] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 7.134472] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 7.147138] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 7.153779] [drm] No driver support for vblank timestamp query. [ 7.159782] drm drm: No connectors reported connected with modes [ 7.165793] [drm] Cannot find any crtc or sizes - going 1024x768 [ 7.191650] Console: switching to colour frame buffer device 128x48 [ 7.203460] drm drm: fb0: frame buffer device [ 7.240815] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 7.249968] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 7.256466] tegra-ehci 7d004000.usb: EHCI Host Controller [ 7.261898] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 7.269869] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 7.300823] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 7.308443] hub 1-0:1.0: USB hub found [ 7.312238] hub 1-0:1.0: 1 port detected [ 7.317035] tegra-ehci 7d008000.usb: EHCI Host Controller [ 7.322460] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 7.330334] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 7.360811] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 7.368280] hub 2-0:1.0: USB hub found [ 7.372065] hub 2-0:1.0: 1 port detected [ 7.380246] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:03 UTC (946684803) [ 7.398473] vdd_sata,avdd_plle: disabling [ 7.402979] usb1_vbus: disabling [ 7.406368] ALSA device list: [ 7.409324] #0: NVIDIA Tegra Beaver [ 7.413512] Waiting for root device /dev/mmcblk0p1... [ 7.730821] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 8.816100] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:41]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:42]: got exception: timeout ~$off

[PYBOOT] [beaver 01:43]: Done. Board colombus-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.357084] df00: eefbb700 00000000 eefbeb00 c035772c eefb8440 c03975fc eefbb700 ee034018 [ 2.365762] df20: 00000108 c1202100 eefbb718 ee0ac000 eefbb700 c035839c eefbb860 00000000 [ 2.374436] df40: c0358364 00000000 ee033080 ee034000 c0358364 00000000 00000000 00000000 [ 2.383104] df60: 00000000 c035d180 00000001 00000000 ffffffff ee034000 00000000 00000000 [ 2.391786] df80: ee0adf80 ee0adf80 00000001 00010001 ee0adf90 ee0adf90 ee033080 ee033080 [ 2.400461] dfa0: c035d0a4 00000000 00000000 c0307d38 00000000 00000000 00000000 00000000 [ 2.409115] dfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.417794] dfe0: 00000000 00000000 00000000 00000000 00000013 00000000 ffffffff ffffffff [ 2.426567] [<c035d5a8>] (kthread_data) from [<c0358980>] (wq_worker_sleeping+0x8/0xd0) [ 2.435176] [<c0358980>] (wq_worker_sleeping) from [<c0bad498>] (__schedule+0x374/0x584) [ 2.443810] [<c0bad498>] (__schedule) from [<c0bad6ec>] (schedule+0x44/0x9c) [ 2.451443] [<c0bad6ec>] (schedule) from [<c03446a0>] (do_exit+0x6d8/0xa78) [ 2.458967] [<c03446a0>] (do_exit) from [<c030bdac>] (die+0x410/0x474) [ 2.466051] [<c030bdac>] (die) from [<c031ce18>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 2.474576] [<c031ce18>] (__do_kernel_fault.part.0) from [<c0317e60>] (do_page_fault+0x36c/0x380) [ 2.484010] [<c0317e60>] (do_page_fault) from [<c03012d8>] (do_DataAbort+0x3c/0xb8) [ 2.492202] [<c03012d8>] (do_DataAbort) from [<c030c478>] (__dabt_svc+0x58/0x80) [ 2.499917] Exception stack(0xee0adcd8 to 0xee0add20) [ 2.505314] dcc0: 00000000 00000000 [ 2.513988] dce0: 00000000 ee0182cc ee018298 c133fb90 00000001 00000000 ee01a008 ffffffff [ 2.522669] dd00: 00000000 0010c8e0 ee018288 ee0add28 c03a2b08 c03a2aac 20000013 ffffffff [ 2.531437] [<c030c478>] (__dabt_svc) from [<c03a2aac>] (clocksource_unbind+0x2c/0x5c) [ 2.539983] [<c03a2aac>] (clocksource_unbind) from [<c03a2b08>] (clocksource_unregister+0x2c/0x44) [ 2.549594] [<c03a2b08>] (clocksource_unregister) from [<c0a272a8>] (sun5i_rate_cb_clksrc+0x34/0x3c) [ 2.559344] [<c0a272a8>] (sun5i_rate_cb_clksrc) from [<c035dc68>] (notifier_call_chain+0x44/0x84) [ 2.568806] [<c035dc68>] (notifier_call_chain) from [<c035dfd8>] (__srcu_notifier_call_chain+0x44/0x60) [ 2.578794] [<c035dfd8>] (__srcu_notifier_call_chain) from [<c035e00c>] (srcu_notifier_call_chain+0x18/0x20) [ 2.589232] [<c035e00c>] (srcu_notifier_call_chain) from [<c0a495e4>] (__clk_notify+0x70/0x7c) [ 2.598452] [<c0a495e4>] (__clk_notify) from [<c0a49730>] (clk_propagate_rate_change+0xa4/0xc4) [ 2.607767] [<c0a49730>] (clk_propagate_rate_change) from [<c0a496f8>] (clk_propagate_rate_change+0x6c/0xc4) [ 2.618091] Code: ebff872d e1a00006 e8bd81f0 e59032f8 (e5130014) [ 2.624530] ---[ end trace a8f82d7508b5e9b0 ]--- [ 2.629408] Fixing recursive fault but reboot is needed!

[PYBOOT] [colombus 02:03]: Timed out waiting for "<type 'str'>":

[PYBOOT] [colombus 02:04]: got exception: timeout ~$off

[PYBOOT] [colombus 02:05]: Done. Board colombus-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.462083] [<c030bdac>] (die) from [<c031ce18>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 2.470608] [<c031ce18>] (__do_kernel_fault.part.0) from [<c0317e60>] (do_page_fault+0x36c/0x380) [ 2.480038] [<c0317e60>] (do_page_fault) from [<c03012d8>] (do_DataAbort+0x3c/0xb8) [ 2.488227] [<c03012d8>] (do_DataAbort) from [<c030c478>] (__dabt_svc+0x58/0x80) [ 2.495947] Exception stack(0xee687cd8 to 0xee687d20) [ 2.501344] 7cc0: 00000000 00000000 [ 2.510017] 7ce0: 00000000 ee0182cc ee018298 c133fb90 00000001 00000000 ee01a008 ffffffff [ 2.518689] 7d00: 00000000 0010c8e0 ee018288 ee687d28 c03a2b08 c03a2aac 20000013 ffffffff [ 2.527460] [<c030c478>] (__dabt_svc) from [<c03a2aac>] (clocksource_unbind+0x2c/0x5c) [ 2.535999] [<c03a2aac>] (clocksource_unbind) from [<c03a2b08>] (clocksource_unregister+0x2c/0x44) [ 2.545602] [<c03a2b08>] (clocksource_unregister) from [<c0a272a8>] (sun5i_rate_cb_clksrc+0x34/0x3c) [ 2.555366] [<c0a272a8>] (sun5i_rate_cb_clksrc) from [<c035dc68>] (notifier_call_chain+0x44/0x84) [ 2.564832] [<c035dc68>] (notifier_call_chain) from [<c035dfd8>] (__srcu_notifier_call_chain+0x44/0x60) [ 2.574826] [<c035dfd8>] (__srcu_notifier_call_chain) from [<c035e00c>] (srcu_notifier_call_chain+0x18/0x20) [ 2.585264] [<c035e00c>] (srcu_notifier_call_chain) from [<c0a495e4>] (__clk_notify+0x70/0x7c) [ 2.594488] [<c0a495e4>] (__clk_notify) from [<c0a49730>] (clk_propagate_rate_change+0xa4/0xc4) [ 2.603808] [<c0a49730>] (clk_propagate_rate_change) from [<c0a496f8>] (clk_propagate_rate_change+0x6c/0xc4) [ 2.614122] Code: ebff872d e1a00006 e8bd81f0 e59032f8 (e5130014) [ 2.620569] ---[ end trace b9e98fe2e6cec86d ]--- [ 2.625458] Fixing recursive fault but reboot is needed! [ 22.559688] INFO: rcu_sched detected stalls on CPUs/tasks: [ 22.565916] 1-...: (3 ticks this GP) idle=d63/140000000000000/0 softirq=32/32 fqs=3 [ 22.574011] (detected by 0, t=4203 jiffies, g=-278, c=-279, q=8) [ 22.580624] Task dump for CPU 1: [ 22.584121] kworker/1:1 D c0bad300 0 90 0 0x00000002 [ 22.591582] [<c0bad300>] (__schedule) from [<c1202100>] (0xc1202100) [ 22.598444] rcu_sched kthread starved for 4121 jiffies! g4294967018 c4294967017 f0x0 RCU_GP_WAIT_FQS(3) ->state=0x1 [ 22.609149] rcu_sched S c0bad300 0 7 2 0x00000000 [ 22.616388] [<c0bad300>] (__schedule) from [<c0bad6ec>] (schedule+0x44/0x9c) [ 22.623994] [<c0bad6ec>] (schedule) from [<c0bb0444>] (schedule_timeout+0x150/0x234) [ 22.632350] [<c0bb0444>] (schedule_timeout) from [<c03949f8>] (rcu_gp_kthread+0x518/0x8dc) [ 22.641168] [<c03949f8>] (rcu_gp_kthread) from [<c035d180>] (kthread+0xdc/0xf4) [ 22.649030] [<c035d180>] (kthread) from [<c0307d38>] (ret_from_fork+0x14/0x3c)

[PYBOOT] [colombus 02:01]: Timed out waiting for "<type 'str'>":

[PYBOOT] [colombus 02:02]: got exception: timeout ~$off

[PYBOOT] [colombus 02:03]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 33.923667] [<c0b4ad60>] (schedule) from [<c0338c50>] (do_exit+0x7bc/0x910) [ 33.933592] [<c0338c50>] (do_exit) from [<c030b7b0>] (die+0x328/0x394) [ 33.943051] [<c030b7b0>] (die) from [<c031a730>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 33.953649] [<c031a730>] (__do_kernel_fault.part.0) from [<c03159b0>] (do_page_fault+0x36c/0x380) [ 33.965103] [<c03159b0>] (do_page_fault) from [<c0301298>] (do_DataAbort+0x3c/0xb8) [ 33.975216] [<c0301298>] (do_DataAbort) from [<c030be78>] (__dabt_svc+0x58/0x80) [ 33.984123] Exception stack(0xee0728e8 to 0xee072930) [ 33.991369] 28e0: ee060cc0 00000001 ffffffff 00000000 ee060cc0 00000000 [ 34.002177] 2900: c1132e20 00000000 ee060eec c0b4ad60 c034fada ee072984 ee0608b8 ee072938 [ 34.012326] 2920: c034b360 c034fad8 20000193 ffffffff [ 34.020016] [<c030be78>] (__dabt_svc) from [<c034fad8>] (kthread_data+0x4/0xc) [ 34.029946] [<c034fad8>] (kthread_data) from [<c034b360>] (wq_worker_sleeping+0x8/0xb8) [ 34.040474] [<c034b360>] (wq_worker_sleeping) from [<c0b4abc8>] (__schedule+0x310/0x464) [ 34.051004] [<c0b4abc8>] (__schedule) from [<c0b4ad60>] (schedule+0x44/0x9c) [ 34.060695] [<c0b4ad60>] (schedule) from [<c0338c50>] (do_exit+0x7bc/0x910) [ 34.070622] [<c0338c50>] (do_exit) from [<c030b7b0>] (die+0x328/0x394) [ 34.080082] [<c030b7b0>] (die) from [<c031a730>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 34.090684] [<c031a730>] (__do_kernel_fault.part.0) from [<c03159b0>] (do_page_fault+0x36c/0x380) [ 34.102135] [<c03159b0>] (do_page_fault) from [<c0301298>] (do_DataAbort+0x3c/0xb8) [ 34.112255] [<c0301298>] (do_DataAbort) from [<c030be78>] (__dabt_svc+0x58/0x80) [ 34.121160] Exception stack(0xee072b20 to 0xee072b68) [ 34.128681] 2b20: ee060cc0 00000001 ffffffff 00000000 ee060cc0 00000000 c1132e20 00000000 [ 34.139509] 2b40: ee060eec c0b4ad60 c034fada ee072bbc ee0608b8 ee072b70 c034b360 c034fad8 [ 34.149316] 2b60: 20000193 ffffffff [ 34.155426] [<c030be78>] (__dabt_svc) from [<c034fad8>] (kthread_data+0x4/0xc) [ 34.165354] [<c034fad8>] (kthread_data) from [<c034b360>] (wq_worker_sleeping+0x8/0xb8) [ 34.175883] [<c034b360>] (wq_worker_sleeping) from [<c0b4abc8>] (__schedule+0x310/0x464) [ 34.186412] [<c0b4abc8>] (__schedule) from [<c0b4ad60>] (schedule+0x44/0x9c) [ 34.196110] [<c0b4ad60>] (schedule) from [<c0338c50>] (do_exit+0x7bc/0x910) [ 34.206034] [<c0338c50>] (do_exit) from [<c030b7b0>] (die+0x328/0x394) [ 34.215500] [<c030b7b0>] (die) from [<c031a730>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 34.226099] [<c031a730>] (__do_kernel_fault.part.0) from [<c03159b0>] (do_page_fault+0x36c/0x380) [ 34.237521] [<c03159b0>] (do_page_fault) from [<c0301298>] (do_DataAbort+0x3c/0xb8) [ 34.247642] [<c0301298>] (do_DataAbort) from [<c030be78>] (__dabt_svc+0x58/0x80) [ 34.256545] Exception stack(0xee072d58 to 0xee072da0) [ 34.263244] 2d40: [PYBOOT] [colombus 01:16]: got exception: panic ~$off

[PYBOOT] [colombus 01:17]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------

[ 2.239581] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 2.250558] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 2.258996] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 2.259248] mmc1: new DDR MMC card at address 0001 [ 2.259736] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 2.259959] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 2.260192] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 2.260407] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 2.261547] mmcblk1: p1 p2 [ 2.294186] rtc rtc1: invalid alarm value: 1900-1-2 0:0:0 [ 2.299692] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 2.306880] exynos-bus: new bus device registered: bus_dmc (100000 KHz ~ 400000 KHz) [ 2.314081] exynos-bus: new bus device registered: bus_acp (100000 KHz ~ 267000 KHz) [ 2.321510] exynos-bus: new bus device registered: bus_c2c (100000 KHz ~ 400000 KHz) [ 2.329796] exynos-bus: new bus device registered: bus_leftbus (100000 KHz ~ 200000 KHz) [ 2.337298] exynos-bus: new bus device registered: bus_rightbus (100000 KHz ~ 200000 KHz) [ 2.345575] exynos-bus: new bus device registered: bus_display (160000 KHz ~ 200000 KHz) [ 2.353637] exynos-bus: new bus device registered: bus_fsys (100000 KHz ~ 134000 KHz) [ 2.361450] exynos-bus: new bus device registered: bus_peri ( 50000 KHz ~ 100000 KHz) [ 2.369155] exynos-bus: new bus device registered: bus_mfc (100000 KHz ~ 200000 KHz) [ 2.375097] devfreq bus_dmc: Couldn't update frequency transition information. [ 2.384966] devfreq bus_leftbus: Couldn't update frequency transition information. [ 2.412775] max98090 1-0010: MAX98090 REVID=0x43 [ 2.417328] max98090 1-0010: use default 2.8v micbias [ 2.429367] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 2.434692] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.467676] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 2.491506] VDD10_HDMI_1.0V: disabling [ 2.493392] vdd_g3d: disabling [ 2.494647] BUCK8_P3V3: disabling [ 2.498228] ALSA device list: [ 2.498911] #0: Odroid-U3 [ 2.503788] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [odroidu3 01:58]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 01:59]: got exception: timeout ~$off

[PYBOOT] [odroidu3 02:00]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.362055] 1f80: 60000013 c1201fa0 c032b824 c0308740 a0000013 ffffffff [ 2.368961] [<c030c50c>] (__irq_svc) from [<c0308740>] (arch_cpu_idle+0x20/0x3c) [ 2.376679] [<c0308740>] (arch_cpu_idle) from [<c037a87c>] (cpu_startup_entry+0x1cc/0x228) [ 2.385305] [<c037a87c>] (cpu_startup_entry) from [<c1000c5c>] (start_kernel+0x380/0x38c) [ 2.393839] [<c1000c5c>] (start_kernel) from [<8020807c>] (0x8020807c) [ 2.400651] Code: e594400c e1866005 e3540000 0a00000d (e5943000) [ 2.407011] ---[ end trace 68e0d337d8ded7b4 ]--- [ 2.411823] Kernel panic - not syncing: Fatal exception in interrupt [ 2.418447] CPU1: stopping [ 2.421266] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 4.8.0-rc7-00919-g2fd766d #1 [ 2.430330] Hardwar[ 2.432242] Unable to handle kernel paging request at virtual address 0000cfcc [ 2.432243] pgd = c0204000 [ 2.432246] [0000cfcc] *pgd=00000000 [ 2.432249] Internal error: Oops: 5 [#2] SMP ARM [ 2.432251] Modules linked in: [ 2.432254] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D 4.8.0-rc7-00919-g2fd766d #1 [ 2.432255] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 2.432257] task: ee0779c0 task.stack: ee09a000 [ 2.432266] PC is at __timer_const_udelay+0x8/0x1c [ 2.432271] LR is at wait_for_xmitr+0x5c/0xd8 [ 2.432275] pc : [<c05973f4>] lr : [<c06fd7b0>] psr: 20000193 [ 2.432275] sp : ee09bd88 ip : 00000000 fp : 00000004 [ 2.432277] r10: 00000044 r9 : c123cfc0 r8 : 0000270f [ 2.432279] r7 : 00000005 r6 : 00063f98 r5 : ee0eb410 r4 : 00000000 [ 2.432281] r3 : 0000cfc0 r2 : 00000002 r1 : 00000065 r0 : c123cfc0 [ 2.432284] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 2.432286] Control: 10c5387d Table: 8020406a DAC: 00000051 [ 2.432288] Process swapper/1 (pid: 0, stack limit = 0xee09a220) [ 2.432290] Stack: (0xee09bd88 to 0xee09c000) [ 2.432294] bd80: 00000065 ee0eb410 ee0eb410 c06fd82c 00000000 c131bbcc [ 2.432298] bda0: 00000044 c06fd83c c131bbe3 c131bc10 ee0eb410 c06db088 ee0eb410 00000001 [ 2.432303] bdc0: 60000193 00000001 00000000 c06fd904 00000001 c12a0d00 c131b6b8 ee09a000 [ 2.432307] bde0: c133bffc 00000000 00000044 c06fd854 00000128 c0385090 c13215ac 00000044 [ 2.432311] be00: 00000128 00000000 00000000 00000000 c133b638 c0385bf8 00000400 00000000 [ 2.432315] be20: 00000129 00000000 c13215ac c131b6b8 0000000f 00000000 00000000 60000193 [ 2.432319] be40: [PYBOOT] [omap5uevm 00:47]: got exception: panic ~$off

[PYBOOT] [omap5uevm 00:48]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.084335] pgd = c0204000 [ 2.087140] [00000016] *pgd=00000000 [ 2.090854] Internal error: Oops: 5 [#1] SMP ARM [ 2.095645] Modules linked in: [ 2.098819] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.8.0-rc7-00919-g2fd766d #1 [ 2.106587] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 2.112823] task: c1206500 task.stack: c1200000 [ 2.117530] PC is at __irq_wake_thread+0x0/0x68 [ 2.122231] LR is at __handle_irq_event_percpu+0x6c/0x124 [ 2.127838] pc : [<c0387d44>] lr : [<c0387e18>] psr: a0000193 [ 2.127838] sp : c1201ea0 ip : 7340002f fp : c0e72438 [ 2.139762] r10: c13168ca r9 : ee1b00c0 r8 : 00000127 [ 2.145183] r7 : c1201edc r6 : 00000000 r5 : 00000002 r4 : ee686680 [ 2.151964] r3 : c09af7bc r2 : 00000004 r1 : 00000002 r0 : ee1b00c0 [ 2.158743] Flags: NzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 2.166242] Control: 10c5387d Table: 8020406a DAC: 00000051 [ 2.172208] Process swapper/0 (pid: 0, stack limit = 0xc1200220) [ 2.178445] Stack: (0xc1201ea0 to 0xc1202000) [ 2.182966] 1ea0: ffff173e 00000001 7b819268 c0e72460 7b61b180 ee1b00c0 ee1b00c0 00000000 [ 2.191461] 1ec0: 00000001 ee008000 fa213000 c1202510 c1202508 c0387eec fa213000 00000000 [ 2.199956] 1ee0: c1202508 ee1b00c0 ee1b0120 c0387f6c ee1b00c0 c120abe0 00000000 c038b3b4 [ 2.208451] 1f00: c1115fac 00000000 00000000 c038747c c1115fac c038774c c1202898 c123d748 [ 2.216946] 1f20: fa21200c c1201f50 fa212000 c0301780 c0308740 a0000013 ffffffff c1201f84 [ 2.225442] 1f40: 00000000 c1200000 c1202510 c030c50c 00000001 00000000 ea000013 f0880000 [ 2.233933] 1f60: c1200000 c12024a4 00000001 00000000 00000000 c1117080 c1202510 c1202508 [ 2.242426] 1f80: 60000013 c1201fa0 c032b824 c0308740 a0000013 ffffffff 00000051 00000000 [ 2.250921] 1fa0: c1200000 c037a87c c1201fa8 c13168c7 00000000 ffffffff 00000000 c1000c5c [ 2.259418] 1fc0: ffffffff ffffffff 00000000 c1000684 00000000 c10a7a30 c13185d4 c1202480 [ 2.267915] 1fe0: c10a7a2c c12076f0 8020406a 412fc0f2 00000000 8020807c 00000000 00000000 [ 2.276413] [<c0387d44>] (__irq_wake_thread) from [<c0e72460>] (0xc0e72460) [ 2.283641] Code: e34c00e7 eb011db7 e594303c eaffff88 (e5913014) [ 2.289971] ---[ end trace bfd2b5869a3cb381 ]--- [ 2.294763] Kernel panic - not syncing: Fatal exception in interrupt [ 3.115342] SMP: failed to stop secondary CPUs [ 3.119955] ---[ end Kernel panic - not syncing: Fatal exception in interrupt

[PYBOOT] [omap5uevm 00:45]: got exception: panic ~$off

[PYBOOT] [omap5uevm 00:46]: Done. Board pi-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.722315] NET: Registered protocol family 17 [ 1.726525] can: controller area network core (rev 20120528 abi 9) [ 1.732700] NET: Registered protocol family 29 [ 1.737104] can: raw protocol (rev 20120528) [ 1.741340] can: broadcast manager protocol (rev 20160617 t) [ 1.746995] can: netlink gateway (rev 20130117) max_hops=1 [ 1.752587] Key type dns_resolver registered [ 1.757039] ThumbEE CPU extension supported. [ 1.764725] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.770181] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.776562] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.781939] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 79,64 bit host data width,64 deep fifo [ 1.791711] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 1.797944] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.811204] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.816808] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.823039] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.828406] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 79,64 bit host data width,64 deep fifo [ 1.838064] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.849498] mmc0: tuning execution failed: -5 [ 1.852394] mmc0: error -5 whilst initialising MMC card [ 1.857627] Waiting for root device /dev/mmcblk0p1... [ 2.748009] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.760964] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.766409] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.772792] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.778172] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 79,64 bit host data width,64 deep fifo [ 5.281979] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330 [ 5.287125] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6 [ 5.298389] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 5.303812] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 5.310211] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 5.315590] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 79,64 bit host data width,64 deep fifo

[PYBOOT] [pi 01:47]: Timed out waiting for "<type 'str'>":

[PYBOOT] [pi 01:48]: got exception: timeout ~$off

[PYBOOT] [pi 01:49]: Done. Board pit-arm-exynos_defconfig failure log: -------------------------------------------------

[ 17.656867] BUG: spinlock lockup suspected on CPU#0, kworker/u16:0/6 [ 17.661739] lock: 0xee737800, .magic: dead4ead, .owner: kworker/u16:0/6, .owner_cpu: 0 [ 17.669720] CPU: 0 PID: 6 Comm: kworker/u16:0 Tainted: G D 4.8.0-rc7-00919-g2fd766d #1 [ 17.678740] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 17.684827] [<c010e0ec>] (unwind_backtrace) from [<c010ad50>] (show_stack+0x10/0x14) [ 17.692540] [<c010ad50>] (show_stack) from [<c032d560>] (dump_stack+0x78/0x8c) [ 17.699741] [<c032d560>] (dump_stack) from [<c015a950>] (do_raw_spin_lock+0xfc/0x1d8) [ 17.707545] [<c015a950>] (do_raw_spin_lock) from [<c06e7ab8>] (__schedule+0x84/0x4b8) [ 17.715351] [<c06e7ab8>] (__schedule) from [<c06e7f38>] (schedule+0x4c/0xac) [ 17.722378] [<c06e7f38>] (schedule) from [<c011d618>] (do_exit+0x8b0/0xa74) [ 17.729320] [<c011d618>] (do_exit) from [<c010af8c>] (die+0x238/0x2f4) [ 17.735830] [<c010af8c>] (die) from [<c0114f78>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 17.743723] [<c0114f78>] (__do_kernel_fault.part.0) from [<c0110968>] (do_bad_area+0x0/0x8c) [ 17.752135] [<c0110968>] (do_bad_area) from [<c01106d4>] (do_page_fault+0x0/0x294) [ 17.759688] [<c01106d4>] (do_page_fault) from [<c0a6024c>] (tasklet_vec+0x4/0x8) [ 17.767053] Sending NMI to all CPUs: [ 17.770608] NMI backtrace for cpu 0 [ 17.774079] CPU: 0 PID: 6 Comm: kworker/u16:0 Tainted: G D 4.8.0-rc7-00919-g2fd766d #1 [ 17.783100] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 17.789183] [<c010e0ec>] (unwind_backtrace) from [<c010ad50>] (show_stack+0x10/0x14) [ 17.796898] [<c010ad50>] (show_stack) from [<c032d560>] (dump_stack+0x78/0x8c) [ 17.804100] [<c032d560>] (dump_stack) from [<c0330ec0>] (nmi_cpu_backtrace+0x78/0x7c) [ 17.811905] [<c0330ec0>] (nmi_cpu_backtrace) from [<c010ca34>] (raise_nmi+0x60/0x64) [ 17.819626] [<c010ca34>] (raise_nmi) from [<c0330e40>] (nmi_trigger_all_cpu_backtrace+0x128/0x130) [ 17.828562] [<c0330e40>] (nmi_trigger_all_cpu_backtrace) from [<c015a958>] (do_raw_spin_lock+0x104/0x1d8) [ 17.838103] [<c015a958>] (do_raw_spin_lock) from [<c06e7ab8>] (__schedule+0x84/0x4b8) [ 17.845910] [<c06e7ab8>] (__schedule) from [<c06e7f38>] (schedule+0x4c/0xac) [ 17.852937] [<c06e7f38>] (schedule) from [<c011d618>] (do_exit+0x8b0/0xa74) [ 17.859878] [<c011d618>] (do_exit) from [<c010af8c>] (die+0x238/0x2f4) [ 17.866385] [<c010af8c>] (die) from [<c0114f78>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 17.874279] [<c0114f78>] (__do_kernel_fault.part.0) from [<c0110968>] (do_bad_area+0x0/0x8c) [ 17.882693] [<c0110968>] (do_bad_area) from [<c01106d4>] (do_page_fault+0x0/0x294) [ 17.890241] [<c01106d4>] (do_page_fault) from [<c0a6024c>] (tasklet_vec+0x4/0x8)

[PYBOOT] [pit 01:48]: Timed out waiting for "<type 'str'>":

[PYBOOT] [pit 01:49]: got exception: timeout ~$off

[PYBOOT] [pit 01:51]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 2.011226] can: broadcast manager protocol (rev 20160617 t) [ 2.016871] can: netlink gateway (rev 20130117) max_hops=1 [ 2.022542] Key type dns_resolver registered [ 2.026923] ThumbEE CPU extension supported. [ 2.034654] dwmmc_exynos 12230000.mmc: IDMAC supports 32-bit address mode. [ 2.040136] dwmmc_exynos 12230000.mmc: Using internal DMA controller. [ 2.046493] dwmmc_exynos 12230000.mmc: Version ID is 241a [ 2.051871] dwmmc_exynos 12230000.mmc: DW MMC controller at irq 108,32 bit host data width,128 deep fifo [ 2.061402] dwmmc_exynos 12230000.mmc: allocated mmc-pwrseq [ 2.081352] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) [ 2.089638] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 2.099883] mmc_host mmc0: Bus speed (slot 0) = 100000000Hz (slot req 52000000Hz, actual 50000000HZ div = 1) [ 2.109262] mmc0: new DDR MMC card at address 0001 [ 2.113830] mmcblk0: mmc0:0001 SEM16G 14.7 GiB [ 2.118202] dwmmc_exynos 12230000.mmc: 1 slots initialized [ 2.124971] mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB [ 2.130024] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 2.137325] mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB [ 2.145492] mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB [ 2.152982] mmcblk0: p2 p3 [ 2.172873] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 2.181519] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:34 UTC (946688434) [ 2.192791] vbat-supply: disabling [ 2.196427] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 2.203309] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities [ 2.213019] mmc2: new high speed SDIO card at address 0001 [ 2.218591] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null) [ 2.225211] VFS: Mounted root (ext4 filesystem) readonly on device 179:3. [ 2.232833] devtmpfs: mounted [ 2.235386] Freeing unused kernel memory: 1024K (c1000000 - c [PYBOOT] [snow 00:41]: kernel: finished booting, starting userspace. 1100000) INIT: version 2.88 booting

[PYBOOT] [snow 03:11]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snow 03:12]: got exception: timeout ~$off

[PYBOOT] [snow 03:14]: Done. Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

[ 2.954010] can: controller area network core (rev 20120528 abi 9) [ 2.960351] NET: Registered protocol family 29 [ 2.964844] can: raw protocol (rev 20120528) [ 2.969200] can: broadcast manager protocol (rev 20160617 t) [ 2.974920] can: netlink gateway (rev 20130117) max_hops=1 [ 2.981055] Key type dns_resolver registered [ 2.991854] Registering SWP/SWPB emulation handler [ 3.013917] 2188000.ethernet supply phy not found, using dummy regulator [ 3.020993] fec 2188000.ethernet: Unbalanced pm_runtime_enable! [ 3.030175] pps pps0: new PPS source ptp0 [ 3.042800] libphy: fec_enet_mii_bus: probed [ 3.049232] fec 2188000.ethernet eth0: registered PHC device 1 [ 3.057681] imx_thermal 2000000.aips-bus:tempmon: Extended Commercial CPU temperature grade - max:105C critical:100C passive:95C [ 3.070643] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode [ 3.079852] sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO [ 3.154328] mmc1: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 3.162603] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode [ 3.171933] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 3.244044] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 3.253804] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01 00:00:01 UTC (1) [ 3.296626] ALSA device list: [ 3.299623] #0: imx6-wandboard-sgtl5000 [ 3.303642] #1: imx-spdif [ 3.308047] Waiting for root device /dev/mmcblk0p2... [ 3.311536] mmc2: host does not support reading read-only switch, assuming write-enable [ 3.317360] mmc2: new high speed SDHC card at address 0001 [ 3.319706] mmcblk2: mmc2:0001 00000 7.61 GiB [ 3.322955] mmcblk2: p1 p2 [ 3.331896] mmc1: host does not support reading read-only switch, assuming write-enable [ 3.337726] mmc1: new high speed SDHC card at address aaaa [ 3.338748] mmcblk1: mmc1:aaaa SU16G 14.8 GiB [ 3.341101] mmcblk1: p1 p2 [ 79.074144] random: crng init done

[PYBOOT] [wandboard 01:43]: Timed out waiting for "<type 'str'>":

[PYBOOT] [wandboard 01:44]: got exception: timeout ~$off

[PYBOOT] [wandboard 01:45]: Done. Board wandboard-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.567109] NET: Registered protocol family 10 [ 1.572408] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.578996] NET: Registered protocol family 17 [ 1.583478] can: controller area network core (rev 20120528 abi 9) [ 1.589729] NET: Registered protocol family 29 [ 1.594196] can: raw protocol (rev 20120528) [ 1.598488] can: broadcast manager protocol (rev 20160617 t) [ 1.604170] can: netlink gateway (rev 20130117) max_hops=1 [ 1.610026] Key type dns_resolver registered [ 1.616179] ThumbEE CPU extension supported. [ 1.620502] Registering SWP/SWPB emulation handler [ 1.643929] 2188000.ethernet supply phy not found, using dummy regulator [ 1.650704] fec 2188000.ethernet: Unbalanced pm_runtime_enable! [ 1.658989] pps pps0: new PPS source ptp0 [ 1.667749] libphy: fec_enet_mii_bus: probed [ 1.672622] fec 2188000.ethernet eth0: registered PHC device 1 [ 1.679807] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode [ 1.690908] sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO [ 1.748494] mmc1: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 1.756948] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode [ 1.766134] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 1.823478] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 1.831164] hctosys: unable to open rtc device (rtc0) [ 1.845164] Waiting for root device /dev/mmcblk0p2... [ 1.906865] mmc2: host does not support reading read-only switch, assuming write-enable [ 1.920832] mmc2: new high speed SDHC card at address 0001 [ 1.926817] mmcblk2: mmc2:0001 00000 7.61 GiB [ 1.932201] mmcblk2: p1 p2 [ 1.940442] mmc1: host does not support reading read-only switch, assuming write-enable [ 1.954544] mmc1: new high speed SDHC card at address aaaa [ 1.960404] mmcblk1: mmc1:aaaa SU16G 14.8 GiB [ 1.965958] mmcblk1: p1 p2 [ 3.164071] random: fast init done

[PYBOOT] [wandboard 01:50]: Timed out waiting for "<type 'str'>":

[PYBOOT] [wandboard 01:51]: got exception: timeout ~$off

[PYBOOT] [wandboard 01:53]: Done. Board wandboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.530452] usbhid: USB HID core driver [ 1.539363] NET: Registered protocol family 10 [ 1.546581] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 1.553086] NET: Registered protocol family 17 [ 1.557556] can: controller area network core (rev 20120528 abi 9) [ 1.563801] NET: Registered protocol family 29 [ 1.568260] can: raw protocol (rev 20120528) [ 1.572541] can: broadcast manager protocol (rev 20160617 t) [ 1.578214] can: netlink gateway (rev 20130117) max_hops=1 [ 1.584033] Key type dns_resolver registered [ 1.589607] ThumbEE CPU extension supported. [ 1.620084] 2188000.ethernet supply phy not found, using dummy regulator [ 1.628761] fec 2188000.ethernet: Unbalanced pm_runtime_enable! [ 1.638190] pps pps0: new PPS source ptp0 [ 1.649646] libphy: fec_enet_mii_bus: probed [ 1.654392] fec 2188000.ethernet eth0: registered PHC device 1 [ 1.661440] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode [ 1.670613] sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO [ 1.721663] mmc1: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA [ 1.729969] sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode [ 1.739142] sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO [ 1.792816] mmc2: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA [ 1.802428] hctosys: unable to open rtc device (rtc0) [ 1.812511] Waiting for root device /dev/mmcblk0p2... [ 1.884023] mmc2: host does not support reading read-only switch, assuming write-enable [ 1.897687] mmc2: new high speed SDHC card at address 0001 [ 1.903550] mmcblk2: mmc2:0001 00000 7.61 GiB [ 1.908857] mmcblk2: p1 p2 [ 1.919844] mmc1: host does not support reading read-only switch, assuming write-enable [ 1.935830] mmc1: new high speed SDHC card at address aaaa [ 1.945419] mmcblk1: mmc1:aaaa SU16G 14.8 GiB [ 1.953794] mmcblk1: p1 p2 [ 2.443801] random: fast init done

[PYBOOT] [wandboard 01:58]: Timed out waiting for "<type 'str'>":

[PYBOOT] [wandboard 01:59]: got exception: timeout ~$off

[PYBOOT] [wandboard 02:00]: Done.