Automated DT boot report for various ARM defconfigs.
Tree/Branch: queue Git describe: v3.10.32 Failed boot tests (console logs at the end) =========================================== omap4-panda: FAIL: omap2plus_defconfig
Full Report ===========
omap2plus_defconfig ------------------- am335x-bone PASS: 0 min 26.5 sec omap4-panda-es PASS: 1 min 2.5 sec omap3-beagle-xm PASS: 0 min 56.3 sec omap3-tobi PASS: 0 min 33.9 sec omap4-panda FAIL: 3 min 5.9 sec
tegra_defconfig --------------- tegra30-beaver PASS: 0 min 18.0 sec
imx_v6_v7_defconfig ------------------- imx6dl-wandboard,wand-dual PASS: 0 min 17.5 sec imx6dl-wandboard,wand-solo PASS: 0 min 18.2 sec
mvebu_defconfig --------------- armada-xp-openblocks-ax3-4 PASS: 0 min 21.5 sec armada-370-mirabox PASS: 0 min 19.4 sec
exynos_defconfig ---------------- exynos5250-arndale PASS: 0 min 30.2 sec
sama5_defconfig --------------- sama5d35ek PASS: 0 min 16.4 sec
Console logs for failures =========================
omap2plus_defconfig -------------------
omap4-panda: FAIL: last 80 lines of boot log: ---------------------------------------------
[ 2.018920] usbcore: registered new interface driver usb-storage [ 2.025726] usbcore: registered new interface driver usbtest [ 2.033416] mousedev: PS/2 mouse device common for all mice [ 2.043823] i2c /dev entries driver [ 2.047851] Driver for 1-wire Dallas network protocol. [ 2.056884] omap_wdt: OMAP Watchdog Timer Rev 0x00: initial timeout 60 sec [ 2.066558] of_get_named_gpio_flags: can't parse gpios property [ 2.072875] of_get_named_gpio_flags: can't parse gpios property [ 2.079742] omap-dma-engine 4a056000.dma-controller: allocating channel for 62 [ 2.087524] omap-dma-engine 4a056000.dma-controller: allocating channel for 61 [ 2.095336] omap_hsmmc 4809c000.mmc: vmmc regulator missing [ 2.101562] omap-dma-engine 4a056000.dma-controller: freeing channel for 61 [ 2.109008] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 2.116485] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 2.124114] of_get_named_gpio_flags: can't parse gpios property [ 2.130401] of_get_named_gpio_flags: can't parse gpios property [ 2.136932] omap-dma-engine 4a056000.dma-controller: allocating channel for 60 [ 2.144653] omap-dma-engine 4a056000.dma-controller: allocating channel for 59 [ 2.152374] omap_hsmmc 480d5000.mmc: vmmc regulator missing [ 2.158355] omap-dma-engine 4a056000.dma-controller: freeing channel for 59 [ 2.165802] omap-dma-engine 4a056000.dma-controller: freeing channel for 60 [ 2.174072] leds-gpio leds.5: pins are not configured from the driver [ 2.180938] of_get_named_gpio_flags exited with status 7 [ 2.186645] of_get_named_gpio_flags exited with status 8 [ 2.192291] of_get_named_gpio_flags exited with status 7 [ 2.199188] of_get_named_gpio_flags exited with status 8 [ 2.206512] ledtrig-cpu: registered to indicate activity on CPUs [ 2.214050] usbcore: registered new interface driver usbhid [ 2.219970] usbhid: USB HID core driver [ 2.225067] oprofile: no performance counters [ 2.231597] oprofile: using timer interrupt. [ 2.236907] TCP: cubic registered [ 2.240447] Initializing XFRM netlink socket [ 2.245117] NET: Registered protocol family 17 [ 2.249938] NET: Registered protocol family 15 [ 2.255004] Key type dns_resolver registered [ 2.259735] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1 [ 2.269165] Power Management for TI OMAP4. [ 2.273742] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 2.281097] ThumbEE CPU extension supported. [ 2.293121] omap_i2c 48070000.i2c: bus 0 rev0.10 at 400 kHz [ 2.308715] Skipping twl internal clock init and using bootloader value (unknown osc rate) [ 2.320373] twl 0-0048: PIH (irq 39) chaining IRQs 416..436 [ 2.329284] twl_rtc rtc.7: Enabling TWL-RTC [ 2.338592] twl_rtc rtc.7: rtc core: registered rtc.7 as rtc0 [ 2.347473] VAUX1_6030: 1000 <--> 3000 mV at 1800 mV [ 2.355255] VAUX2_6030: 1200 <--> 2800 mV at 1800 mV [ 2.362762] VAUX3_6030: 1000 <--> 3000 mV at 1200 mV [ 2.370269] VMMC: 1200 <--> 3000 mV at 3000 mV [ 2.377197] VPP: 1800 <--> 2500 mV at 1900 mV [ 2.384246] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 2.391021] VDAC: 1800 mV [ 2.395538] VANA: 2100 mV [ 2.400512] VCXIO: 1800 mV [ 2.405151] VUSB: 3300 mV [ 2.410156] V1V8: 1800 mV [ 2.415130] V2V1: 2100 mV [ 2.428588] of_get_named_gpio_flags exited with status 127 [ 2.441070] omap_i2c 48072000.i2c: bus 1 rev0.10 at 400 kHz [ 2.449005] omap_i2c 48060000.i2c: bus 2 rev0.10 at 100 kHz [ 2.460937] omap_i2c 48350000.i2c: bus 3 rev0.10 at 400 kHz [ 2.466979] of_get_named_gpio_flags: can't parse gpios property [ 2.473663] of_get_named_gpio_flags: can't parse gpios property [ 2.480133] omap-dma-engine 4a056000.dma-controller: allocating channel for 62 [ 2.488006] omap-dma-engine 4a056000.dma-controller: allocating channel for 61 [ 2.499206] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.550537] twl_rtc rtc.7: setting system clock to 2000-02-01 10:11:03 UTC (949399863) [ 2.814300] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.825164] mmc0: new high speed SD card at address aaaa [ 2.833282] mmcblk0: mmc0:aaaa SD02G 1.84 GiB [ 2.842956] mmcblk0: p1 p2 p[ 15.982940] Freeing unused kernel memory: 392K (c0705000 - c0767000) Starting logging: OK Initializing random number generator... done. Starting network... /bin/sh: can't access tty; job control turned off / #~$off # PYBOOT: Exception: userspace: ERROR: Never found root shell # PYBOOT: Time: 185.93 seconds. # PYBOOT: Result: FAIL
kernel-build-reports@lists.linaro.org