Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-8907-g7639dad/
Failed boards:
arndale multi_v7_nosmp_defconfig : NO BUILD bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:53.27 omap5uevm arm-omap2plus_defconfig : FAILED 2:06.02 omap5uevm arm-multi_v7_defconfig : FAILED 2:09.71 omap5uevm arm-multi_lpae_defconfig : FAILED 2:12.67 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-multi_v7_defconfig : FAILED 2:05.76 pi arm-multi_lpae_defconfig : FAILED 1:50.78 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard multi_v7_nosmp_defconfig : NO BUILD
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:14.71 arndale arm-exynos_defconfig : passed 1:32.25 arndale arm-multi_v7_defconfig : passed 1:30.75 arndale arm-multi_lpae_defconfig : passed 1:23.52 bbb arm-omap2plus_defconfig : passed 1:40.56 beagleboard-x15 arm-omap2plus_defconfig : warnings 0:52.50 beagleboard-x15 arm-multi_v7_defconfig : warnings 0:54.38 beagleboard-x15 arm-multi_lpae_defconfig : warnings 1:03.73 capri arm-bcm_defconfig : passed 0:56.43 capri arm-multi_v7_defconfig : passed 0:49.07 chitra powerpc-ppc64_defconfig : passed 3:17.42 colombus arm-sunxi_defconfig : passed 2:22.57 colombus arm-multi_v7_defconfig : passed 2:36.58 colombus arm-multi_lpae_defconfig : passed 2:35.40 cosmic arm-imx_v6_v7_defconfig : passed 3:27.29 cosmic arm-multi_v7_defconfig : passed 2:52.04 cubie arm-sunxi_defconfig : passed 0:52.81 cubie arm-multi_v7_defconfig : passed 0:52.33 cubie2 arm-sunxi_defconfig : passed 1:00.23 cubie2 arm-multi_v7_defconfig : passed 0:53.51 cubie2 arm-multi_lpae_defconfig : passed 0:52.98 cubox arm-multi_v7_defconfig : passed 1:26.65 cubox arm-mvebu_v7_defconfig : passed 1:07.20 dalmore arm-tegra_defconfig : warnings 1:27.78 dalmore arm-multi_v7_defconfig : warnings 1:31.34 dalmore arm-multi_lpae_defconfig : warnings 1:30.06 hummingboard arm-imx_v6_v7_defconfig : passed 1:36.99 hummingboard arm-multi_v7_defconfig : passed 1:22.91 jetsontk1 arm-tegra_defconfig : warnings 1:39.09 jetsontk1 arm-multi_v7_defconfig : warnings 1:38.04 jetsontk1 arm-multi_lpae_defconfig : warnings 1:43.36 pandaes arm-omap2plus_defconfig : warnings 1:45.19 pandaes arm-multi_v7_defconfig : passed 2:05.52 parallella arm-multi_v7_defconfig : passed 2:41.55 pi arm-exynos_defconfig : passed 2:15.89 pit arm-exynos_defconfig : passed 2:13.99 pit arm-multi_v7_defconfig : passed 2:27.11 pit arm-multi_lpae_defconfig : passed 2:21.73 seaboard arm-tegra_defconfig : warnings 1:02.23 seaboard arm-multi_v7_defconfig : warnings 1:02.37 seattle arm64-defconfig : passed 2:10.53 snow arm-exynos_defconfig : passed 2:11.99 snow arm-multi_v7_defconfig : passed 2:07.19 snow arm-multi_lpae_defconfig : passed 2:01.13 snowball arm-u8500_defconfig : passed 1:06.16 snowball arm-multi_v7_defconfig : passed 2:12.64 trimslice arm-multi_v7_defconfig : warnings 1:43.98 wandboard arm-imx_v6_v7_defconfig : passed 1:18.88 wandboard arm-multi_v7_defconfig : passed 1:20.77
Offline boards:
bbb arm-multi_v7_defconfig : OFFLINE 1:43.98 beaver arm-tegra_defconfig : OFFLINE 2:12.08 beaver arm-multi_v7_defconfig : OFFLINE 2:26.08 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:18.42 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:22.66 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:44.97 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:41.93 sama5 arm-sama5_defconfig : OFFLINE 2:28.31 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:32.43 socfpga arm-socfpga_defconfig : OFFLINE 2:18.98 socfpga arm-multi_v7_defconfig : OFFLINE 2:18.53 trimslice arm-tegra_defconfig : OFFLINE 2:27.23
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.825294] NET: Registered protocol family 10 [ 1.825908] sit: IPv6 over IPv4 tunneling driver [ 1.833520] NET: Registered protocol family 17 [ 1.834423] NET: Registered protocol family 15 [ 1.838896] Key type dns_resolver registered [ 1.843215] Registering SWP/SWPB emulation handler [ 1.851122] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.855765] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.863191] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.870352] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.876925] [drm] No driver support for vblank timestamp query. [ 1.882836] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.889185] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.894392] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.901565] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.910357] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.920122] mmc1: new DDR MMC card at address 0001 [ 1.925043] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.929275] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.935125] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.940849] max98090 1-0010: MAX98090 REVID=0x43 [ 1.945612] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.952124] mmcblk1: p1 p2 [ 1.954773] max98090 1-0010: use default 2.8v micbias [ 1.965047] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.968502] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.005552] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:21 UTC (946688421) [ 2.021126] VDD10_HDMI_1.0V: disabling [ 2.021801] vdd_g3d: disabling [ 2.022879] BUCK8_2.8V: disabling [ 2.026806] ALSA device list: [ 2.028517] #0: Odroid-U3 [ 2.032121] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:50]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:51]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:52]: Done.
========================================================================
Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.978293] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.984829] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.992844] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.003959] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.012097] ldo9: bypassed regulator has no supply! [ 2.017220] ldo9: failed to get the current voltage(-517) [ 2.022886] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.037117] smsc95xx v1.0.4 [ 2.041164] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.064319] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.070731] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.088098] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 8e:6e:71:ee:d3:b5 [ 2.107055] smps9: Bringing 0uV into 2100000-2100000uV [ 2.125760] ldo9: bypassed regulator has no supply! [ 2.130877] ldo9: failed to get the current voltage(-517) [ 2.136538] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.150619] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.182202] smps9: Bringing 0uV into 2100000-2100000uV [ 2.200873] ldo9: bypassed regulator has no supply! [ 2.205994] ldo9: failed to get the current voltage(-517) [ 2.211659] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.226117] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:02:25 UTC (946684945) [ 2.241809] pbias_mmc_omap5: disabling [ 2.245763] vmmcsdio_fixed: disabling [ 2.250303] Waiting for root device /dev/mmcblk1p2... [ 2.328566] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.464404] hub 1-2:1.0: USB hub found [ 2.468416] hub 1-2:1.0: 3 ports detected [ 2.474282] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.502318] smps9: Bringing 0uV into 2100000-2100000uV [ 2.520992] ldo9: bypassed regulator has no supply! [ 2.526116] ldo9: failed to get the current voltage(-517) [ 2.531784] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:10]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:11]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:12]: Done.
========================================================================
Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.933254] mmc0: new high speed MMC card at address 0001 [ 1.939324] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.944221] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.950578] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.959971] smps6: Bringing 1350000uV into 1200000-1200000uV [ 1.970271] smps9: Bringing 0uV into 2100000-2100000uV [ 1.978435] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.985074] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.993458] ldo4: Bringing 0uV into 1800000-1800000uV [ 1.998938] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, e2:ae:a5:4c:c5:44 [ 2.016489] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.024678] ldo9: bypassed regulator has no supply! [ 2.029798] ldo9: failed to get the current voltage(-517) [ 2.035462] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.050801] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.074300] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.080694] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.107416] smps9: Bringing 0uV into 2100000-2100000uV [ 2.126435] ldo9: bypassed regulator has no supply! [ 2.131557] ldo9: failed to get the current voltage(-517) [ 2.137214] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.151746] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.167401] pbias_mmc_omap5: disabling [ 2.171342] vmmcsdio_fixed: disabling [ 2.175876] Waiting for root device /dev/mmcblk1p2... [ 2.248543] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.384315] hub 1-2:1.0: USB hub found [ 2.388331] hub 1-2:1.0: 3 ports detected [ 2.394221] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.422447] smps9: Bringing 0uV into 2100000-2100000uV [ 2.441430] ldo9: bypassed regulator has no supply! [ 2.446548] ldo9: failed to get the current voltage(-517) [ 2.452222] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:07]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:08]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:09]: Done.
========================================================================
Board omap5uevm-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 4.016680] ldo9: bypassed regulator has no supply! [ 4.021806] ldo9: failed to get the current voltage(-517) [ 4.027466] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.050402] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 4.057949] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 4.064530] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 4.070841] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.077679] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.087267] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.096775] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.103837] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 4.109997] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.116292] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.123156] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.132748] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.142252] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.149301] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.169944] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 4.176240] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 4.183108] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 4.192693] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 4.202180] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 4.209212] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 4.229645] smps9: Bringing 0uV into 2100000-2100000uV [ 4.258046] ldo9: bypassed regulator has no supply! [ 4.263178] ldo9: failed to get the current voltage(-517) [ 4.268847] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.289039] hctosys: unable to open rtc device (rtc0) [ 4.294354] sr_init: No PMIC hook to init smartreflex [ 4.299854] sr_init: platform driver register failed for SR [ 4.327801] pbias_mmc_omap5: disabling [ 4.331763] vmmcsdio_fixed: disabling [ 4.337922] Waiting for root device /dev/mmcblk1p2...
[PYBOOT] [omap5uevm 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:04]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:05]: Done.
========================================================================
Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.522817] isl29018 7-0044: No cache defaults, reading back from HW [ 1.529168] isl29018 7-0044: Failed to read 1: -6 [ 1.533751] isl29018 7-0044: regmap initialization fails: -6 [ 1.544196] NET: Registered protocol family 10 [ 1.548626] sit: IPv6 over IPv4 tunneling driver [ 1.552212] NET: Registered protocol family 17 [ 1.556208] can: controller area network core (rev 20120528 abi 9) [ 1.562396] NET: Registered protocol family 29 [ 1.566786] can: raw protocol (rev 20120528) [ 1.571035] can: broadcast manager protocol (rev 20120528 t) [ 1.576676] can: netlink gateway (rev 20130117) max_hops=1 [ 1.582395] Key type dns_resolver registered [ 1.586719] ThumbEE CPU extension supported. [ 1.590626] Registering SWP/SWPB emulation handler [ 1.600519] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.606006] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.612365] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.617740] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.627818] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.638149] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.643598] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.653780] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.659963] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.665341] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.675056] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.697315] Waiting for root device /dev/mmcblk0p1... [ 1.701192] mmc0: tuning execution failed: -5 [ 1.705223] mmc0: error -5 whilst initialising MMC card [ 2.572817] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.586961] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.592421] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.598794] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.604179] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:49]: got exception: timeout ~$off
[PYBOOT] [pi 01:50]: Done.
========================================================================
Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.522781] isl29018 7-0044: No cache defaults, reading back from HW [ 1.529133] isl29018 7-0044: Failed to read 1: -6 [ 1.533717] isl29018 7-0044: regmap initialization fails: -6 [ 1.544157] NET: Registered protocol family 10 [ 1.548595] sit: IPv6 over IPv4 tunneling driver [ 1.552186] NET: Registered protocol family 17 [ 1.556181] can: controller area network core (rev 20120528 abi 9) [ 1.562370] NET: Registered protocol family 29 [ 1.566759] can: raw protocol (rev 20120528) [ 1.571008] can: broadcast manager protocol (rev 20120528 t) [ 1.576651] can: netlink gateway (rev 20130117) max_hops=1 [ 1.582362] Key type dns_resolver registered [ 1.586696] ThumbEE CPU extension supported. [ 1.590600] Registering SWP/SWPB emulation handler [ 1.600494] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.605978] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.612338] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.617713] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.627793] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.638118] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.643563] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.653747] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.659928] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.665306] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.675022] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.697281] Waiting for root device /dev/mmcblk0p1... [ 1.701161] mmc0: tuning execution failed: -5 [ 1.705188] mmc0: error -5 whilst initialising MMC card [ 2.572794] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.586926] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.592390] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.598760] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.604144] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 02:03]: got exception: timeout ~$off
[PYBOOT] [pi 02:05]: Done.
kernel-build-reports@lists.linaro.org