Full logs are available at http://arm-soc.lixom.net/bootlogs/arm-soc/v4.6-6651-g74db14d/
Failed boards:
arndale multi_v7_nosmp_defconfig : NO BUILD bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:47.16 omap5uevm arm-omap2plus_defconfig : FAILED 2:05.93 omap5uevm arm-multi_v7_defconfig : FAILED 2:11.60 omap5uevm arm-multi_lpae_defconfig : FAILED 2:22.77 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-multi_lpae_defconfig : FAILED 1:54.75 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard arm-imx_v6_v7_defconfig : FAILED 2:57.66 wandboard multi_v7_nosmp_defconfig : NO BUILD
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:17.77 arndale arm-exynos_defconfig : passed 1:30.20 arndale arm-multi_v7_defconfig : passed 1:35.36 arndale arm-multi_lpae_defconfig : passed 1:42.37 bbb arm-omap2plus_defconfig : passed 1:46.98 bbb arm-multi_v7_defconfig : passed 1:19.50 beagleboard-x15 arm-omap2plus_defconfig : warnings 0:50.99 beagleboard-x15 arm-multi_v7_defconfig : warnings 0:56.08 beagleboard-x15 arm-multi_lpae_defconfig : warnings 0:58.37 capri arm-bcm_defconfig : passed 0:48.02 capri arm-multi_v7_defconfig : passed 1:08.40 chitra powerpc-ppc64_defconfig : passed 2:09.52 colombus arm-sunxi_defconfig : passed 2:18.59 colombus arm-multi_v7_defconfig : passed 2:35.07 colombus arm-multi_lpae_defconfig : passed 2:36.78 cosmic arm-imx_v6_v7_defconfig : passed 3:26.29 cosmic arm-multi_v7_defconfig : passed 2:58.58 cubie arm-sunxi_defconfig : passed 0:59.86 cubie arm-multi_v7_defconfig : passed 0:54.32 cubie2 arm-sunxi_defconfig : passed 0:56.26 cubie2 arm-multi_v7_defconfig : passed 1:06.39 cubie2 arm-multi_lpae_defconfig : passed 0:49.54 cubox arm-multi_v7_defconfig : passed 1:21.29 cubox arm-mvebu_v7_defconfig : passed 1:23.62 dalmore arm-tegra_defconfig : warnings 1:27.61 dalmore arm-multi_v7_defconfig : warnings 1:40.49 dalmore arm-multi_lpae_defconfig : warnings 1:39.07 hummingboard arm-imx_v6_v7_defconfig : passed 1:37.99 hummingboard arm-multi_v7_defconfig : passed 1:14.51 jetsontk1 arm-tegra_defconfig : warnings 0:53.69 jetsontk1 arm-multi_v7_defconfig : warnings 0:50.35 jetsontk1 arm-multi_lpae_defconfig : warnings 0:59.07 pandaes arm-omap2plus_defconfig : warnings 1:43.65 pandaes arm-multi_v7_defconfig : passed 1:43.61 pi arm-exynos_defconfig : passed 2:13.53 pi arm-multi_v7_defconfig : passed 2:24.97 pit arm-exynos_defconfig : passed 2:12.60 pit arm-multi_v7_defconfig : passed 2:25.57 pit arm-multi_lpae_defconfig : passed 2:15.60 seaboard arm-tegra_defconfig : warnings 1:07.69 seaboard arm-multi_v7_defconfig : warnings 0:59.55 seattle arm64-defconfig : warnings 2:21.55 snow arm-exynos_defconfig : passed 2:07.58 snow arm-multi_v7_defconfig : passed 2:35.82 snow arm-multi_lpae_defconfig : passed 2:00.74 snowball arm-u8500_defconfig : passed 1:06.96 snowball arm-multi_v7_defconfig : passed 1:19.86 trimslice arm-tegra_defconfig : warnings 1:39.22 trimslice arm-multi_v7_defconfig : warnings 1:44.53 wandboard arm-multi_v7_defconfig : passed 1:19.93
Offline boards:
beaver arm-tegra_defconfig : OFFLINE 2:12.51 beaver arm-multi_v7_defconfig : OFFLINE 2:25.85 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:17.62 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:23.13 parallella arm-multi_v7_defconfig : OFFLINE 2:42.83 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:53.54 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:47.33 sama5 arm-sama5_defconfig : OFFLINE 2:23.70 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:17.34 socfpga arm-socfpga_defconfig : OFFLINE 2:36.75 socfpga arm-multi_v7_defconfig : OFFLINE 2:16.76
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.838423] NET: Registered protocol family 10 [ 1.839014] sit: IPv6 over IPv4 tunneling driver [ 1.842300] NET: Registered protocol family 17 [ 1.846280] NET: Registered protocol family 15 [ 1.850760] Key type dns_resolver registered [ 1.856077] Registering SWP/SWPB emulation handler [ 1.863004] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.867634] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.875019] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.882159] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.888749] [drm] No driver support for vblank timestamp query. [ 1.894663] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.900998] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.905435] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.905630] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.905909] mmc1: new DDR MMC card at address 0001 [ 1.906270] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.906432] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.906580] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.906740] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.907712] mmcblk1: p1 p2 [ 1.955399] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.987283] max98090 1-0010: MAX98090 REVID=0x43 [ 1.989636] max98090 1-0010: use default 2.8v micbias [ 1.999114] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 2.003574] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.039988] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 2.061851] VDD10_HDMI_1.0V: disabling [ 2.062580] vdd_g3d: disabling [ 2.063648] BUCK8_2.8V: disabling [ 2.067707] ALSA device list: [ 2.069245] #0: Odroid-U3 [ 2.073166] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:44]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:45]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:46]: Done.
========================================================================
Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.980255] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.986763] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.994783] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.005892] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.014056] smsc95xx v1.0.4 [ 2.017521] ldo9: bypassed regulator has no supply! [ 2.022639] ldo9: failed to get the current voltage(-517) [ 2.028302] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.043632] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.069876] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.076258] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.103413] smps9: Bringing 0uV into 2100000-2100000uV [ 2.103602] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 16:d1:dd:26:6b:db [ 2.133996] ldo9: bypassed regulator has no supply! [ 2.139120] ldo9: failed to get the current voltage(-517) [ 2.144780] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.158900] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.192856] smps9: Bringing 0uV into 2100000-2100000uV [ 2.211752] ldo9: bypassed regulator has no supply! [ 2.216866] ldo9: failed to get the current voltage(-517) [ 2.222530] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.237055] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 02:31:32 UTC (946693892) [ 2.252722] pbias_mmc_omap5: disabling [ 2.256671] vmmcsdio_fixed: disabling [ 2.261215] Waiting for root device /dev/mmcblk1p2... [ 2.329123] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.465008] hub 1-2:1.0: USB hub found [ 2.469022] hub 1-2:1.0: 3 ports detected [ 2.474765] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.502978] smps9: Bringing 0uV into 2100000-2100000uV [ 2.521909] ldo9: bypassed regulator has no supply! [ 2.527035] ldo9: failed to get the current voltage(-517) [ 2.532706] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:20]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:21]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:22]: Done.
========================================================================
Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.938301] smps6: Bringing 1350000uV into 1200000-1200000uV [ 1.946552] mmc0: new high speed MMC card at address 0001 [ 1.952562] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.953679] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 8a:fb:b3:15:d0:42 [ 1.969130] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.975477] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.984367] smps9: Bringing 0uV into 2100000-2100000uV [ 1.992602] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.999122] ldo2: Bringing 0uV into 2800000-2800000uV [ 2.007153] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.018312] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.026571] ldo9: bypassed regulator has no supply! [ 2.031687] ldo9: failed to get the current voltage(-517) [ 2.037355] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.052666] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.080003] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.086391] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.112894] smps9: Bringing 0uV into 2100000-2100000uV [ 2.131600] ldo9: bypassed regulator has no supply! [ 2.136721] ldo9: failed to get the current voltage(-517) [ 2.142387] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.156976] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 02:28:54 UTC (946693734) [ 2.172605] pbias_mmc_omap5: disabling [ 2.176546] vmmcsdio_fixed: disabling [ 2.181083] Waiting for root device /dev/mmcblk1p2... [ 2.189185] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.324975] hub 1-2:1.0: USB hub found [ 2.328987] hub 1-2:1.0: 3 ports detected [ 2.334731] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.362922] smps9: Bringing 0uV into 2100000-2100000uV [ 2.381627] ldo9: bypassed regulator has no supply! [ 2.386749] ldo9: failed to get the current voltage(-517) [ 2.392417] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:08]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:09]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:10]: Done.
========================================================================
Board omap5uevm-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 4.058197] ldo9: bypassed regulator has no supply! [ 4.063325] ldo9: failed to get the current voltage(-517) [ 4.068993] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.091708] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 4.099150] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 4.105719] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 4.112033] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.118878] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.128460] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.137950] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.145002] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 4.151138] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.157425] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.164286] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.173878] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.183363] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.190400] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.230079] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 4.236367] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 4.243239] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 4.252825] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 4.262315] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 4.269359] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 4.290336] smps9: Bringing 0uV into 2100000-2100000uV [ 4.319157] ldo9: bypassed regulator has no supply! [ 4.324286] ldo9: failed to get the current voltage(-517) [ 4.329967] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.350032] hctosys: unable to open rtc device (rtc0) [ 4.355333] sr_init: No PMIC hook to init smartreflex [ 4.360833] sr_init: platform driver register failed for SR [ 4.388578] pbias_mmc_omap5: disabling [ 4.392544] vmmcsdio_fixed: disabling [ 4.398603] Waiting for root device /dev/mmcblk1p2...
[PYBOOT] [omap5uevm 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:04]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:05]: Done.
========================================================================
Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.539737] isl29018 7-0044: No cache defaults, reading back from HW [ 1.546083] isl29018 7-0044: Failed to read 1: -6 [ 1.550667] isl29018 7-0044: regmap initialization fails: -6 [ 1.561540] NET: Registered protocol family 10 [ 1.565991] sit: IPv6 over IPv4 tunneling driver [ 1.569576] NET: Registered protocol family 17 [ 1.573579] can: controller area network core (rev 20120528 abi 9) [ 1.579764] NET: Registered protocol family 29 [ 1.584154] can: raw protocol (rev 20120528) [ 1.588403] can: broadcast manager protocol (rev 20120528 t) [ 1.594045] can: netlink gateway (rev 20130117) max_hops=1 [ 1.599773] Key type dns_resolver registered [ 1.604105] ThumbEE CPU extension supported. [ 1.608015] Registering SWP/SWPB emulation handler [ 1.617928] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.623411] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.629775] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.635149] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.645252] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.655536] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.660981] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.671167] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.677347] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.682725] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.692462] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.714584] Waiting for root device /dev/mmcblk0p1... [ 1.718468] mmc0: tuning execution failed: -5 [ 1.722525] mmc0: error -5 whilst initialising MMC card [ 2.584491] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.598583] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.604040] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.610412] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.615797] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:52]: got exception: timeout ~$off
[PYBOOT] [pi 01:53]: Done.
========================================================================
Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 19.925747] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" cannot execute "/sbin/getty" INIT: Id "1" respawning too fast: disabled for 5 minutes INIT: Id "5" respawning too fast: disabled for 5 minutes [ 19.972253] mmcblk0: error -110 sending status command, retrying [ 19.980781] mmcblk0: error -110 sending status command, retrying [ 19.989245] mmcblk0: error -110 sending status command, aborting [ 20.000313] mmcblk0: error -110 sending status command, retrying [ 20.008770] mmcblk0: error -110 sending status command, retrying [ 20.017191] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" I[ 20.028421] mmcblk0: error -110 sending status command, retrying NIT: Id "S1" respawning too fast:[ 20.037228] mmcblk0: error -110 sending status command, retrying disabled for 5 minutes cannot [ 20.046080] mmcblk0: error -110 sending status command, aborting execute "/sbin/getty" INIT: cannot execute "/sbin/getty" [ 20.059165] mmcblk0: error -110 sending status command, retrying [ 20.068084] mmcblk0: error -110 sending status command, retrying [ 20.076510] mmcblk0: error -110 sending status command, aborting [ 20.087540] mmcblk0: error -110 sending status command, retrying [ 20.095963] mmcblk0: error -110 sending status command, retrying [ 20.104386] mmcblk0: error -110 sending status command, aborting INIT: INIT: cannot execute "/sbin/getty"
INIT: Id "3" respawning too fast: disabled for 5 minutes INIT: Id "4" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 47.375908] random: nonblocking pool is initialized
[PYBOOT] [wandboard 02:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 02:56]: got exception: timeout ~$off
[PYBOOT] [wandboard 02:57]: Done.
kernel-build-reports@lists.linaro.org