Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.7-rc3-240-gc141afd/
Failed boards:
arndale multi_v7_nosmp_defconfig : NO BUILD bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver arm-tegra_defconfig : FAILED 1:46.75 beaver arm-multi_v7_defconfig : FAILED 2:01.40 beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 0:34.16 omap5uevm arm-omap2plus_defconfig : FAILED 2:08.87 omap5uevm arm-multi_v7_defconfig : FAILED 2:09.27 omap5uevm arm-multi_lpae_defconfig : FAILED 2:16.11 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-multi_v7_defconfig : FAILED 1:53.40 pi arm-multi_lpae_defconfig : FAILED 2:00.29 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard multi_v7_nosmp_defconfig : NO BUILD
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:26.65 arndale arm-exynos_defconfig : passed 1:49.89 arndale arm-multi_v7_defconfig : passed 1:32.17 arndale arm-multi_lpae_defconfig : passed 1:36.14 bbb arm-omap2plus_defconfig : passed 1:40.12 bbb arm-multi_v7_defconfig : passed 1:14.74 beagleboard-x15 arm-omap2plus_defconfig : warnings 0:49.19 beagleboard-x15 arm-multi_v7_defconfig : warnings 0:57.30 beagleboard-x15 arm-multi_lpae_defconfig : warnings 0:50.89 capri arm-bcm_defconfig : passed 0:55.61 capri arm-multi_v7_defconfig : passed 0:58.56 chitra powerpc-pasemi_defconfig : passed 1:59.14 chitra powerpc-ppc64_defconfig : passed 2:00.53 colombus arm-sunxi_defconfig : passed 2:24.76 colombus arm-multi_v7_defconfig : passed 2:35.10 colombus arm-multi_lpae_defconfig : passed 2:35.79 cosmic arm-imx_v6_v7_defconfig : passed 3:27.65 cosmic arm-multi_v7_defconfig : passed 2:57.73 cubie arm-sunxi_defconfig : passed 0:52.56 cubie arm-multi_v7_defconfig : passed 0:56.66 cubie2 arm-sunxi_defconfig : passed 0:50.99 cubie2 arm-multi_v7_defconfig : passed 1:00.92 cubie2 arm-multi_lpae_defconfig : passed 0:52.12 cubox arm-multi_v7_defconfig : passed 1:14.76 cubox arm-mvebu_v7_defconfig : passed 1:18.45 dalmore arm-tegra_defconfig : passed 1:26.40 dalmore arm-multi_v7_defconfig : passed 1:28.52 dalmore arm-multi_lpae_defconfig : passed 1:30.52 jetsontk1 arm-tegra_defconfig : passed 0:50.00 jetsontk1 arm-multi_v7_defconfig : passed 0:50.30 jetsontk1 arm-multi_lpae_defconfig : passed 1:50.29 pandaes arm-omap2plus_defconfig : warnings 1:39.33 pandaes arm-multi_v7_defconfig : passed 1:44.59 parallella arm-multi_v7_defconfig : passed 2:48.38 pi arm-exynos_defconfig : passed 2:13.16 pit arm-exynos_defconfig : passed 2:11.25 pit arm-multi_v7_defconfig : passed 2:19.29 pit arm-multi_lpae_defconfig : passed 2:18.68 seaboard arm-tegra_defconfig : passed 1:01.85 seaboard arm-multi_v7_defconfig : passed 1:14.00 seattle arm64-defconfig : passed 2:21.82 snow arm-exynos_defconfig : passed 2:12.17 snow arm-multi_v7_defconfig : passed 2:07.30 snow arm-multi_lpae_defconfig : passed 2:00.91 snowball arm-u8500_defconfig : passed 1:22.78 snowball arm-multi_v7_defconfig : passed 2:47.80 trimslice arm-multi_v7_defconfig : passed 1:44.24 wandboard arm-imx_v6_v7_defconfig : passed 1:18.67 wandboard arm-multi_v7_defconfig : passed 1:08.20
Offline boards:
colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:18.27 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:19.51 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:24.07 hummingboard arm-multi_v7_defconfig : OFFLINE 2:14.53 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:43.00 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:56.64 sama5 arm-sama5_defconfig : OFFLINE 2:18.00 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:26.76 socfpga arm-socfpga_defconfig : OFFLINE 2:23.37 socfpga arm-multi_v7_defconfig : OFFLINE 2:13.38 trimslice arm-tegra_defconfig : OFFLINE 2:22.82
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.238066] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.245023] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.251542] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.258492] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.264076] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.270784] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.280783] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.291670] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.298312] [drm] No driver support for vblank timestamp query. [ 3.304258] drm drm: No connectors reported connected with modes [ 3.310268] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.336380] Console: switching to colour frame buffer device 128x48 [ 3.348346] drm drm: fb0: frame buffer device [ 3.363648] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.374463] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.380927] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.386337] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.394167] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.408656] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.415703] hub 1-0:1.0: USB hub found [ 3.419474] hub 1-0:1.0: 1 port detected [ 3.424394] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.429804] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.437554] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.448650] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.455601] hub 2-0:1.0: USB hub found [ 3.459368] hub 2-0:1.0: 1 port detected [ 3.469195] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.482855] vdd_sata,avdd_plle: disabling [ 3.487555] usb1_vbus: disabling [ 3.491650] Waiting for root device /dev/mmcblk0p1... [ 3.773655] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.715290] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:57]: got exception: timeout ~$off
[PYBOOT] [beaver 01:58]: Done.
========================================================================
Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------
[ 6.244182] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 6.251221] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.256821] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 6.264307] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 6.274305] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 6.286869] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.293506] [drm] No driver support for vblank timestamp query. [ 6.299501] drm drm: No connectors reported connected with modes [ 6.305526] [drm] Cannot find any crtc or sizes - going 1024x768 [ 6.331195] Console: switching to colour frame buffer device 128x48 [ 6.343003] drm drm: fb0: frame buffer device [ 6.370766] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 6.380053] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 6.386529] tegra-ehci 7d004000.usb: EHCI Host Controller [ 6.391959] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 6.399935] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 6.420768] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 6.428363] hub 1-0:1.0: USB hub found [ 6.432160] hub 1-0:1.0: 1 port detected [ 6.436976] tegra-ehci 7d008000.usb: EHCI Host Controller [ 6.442417] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 6.450280] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 6.470762] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 6.478235] hub 2-0:1.0: USB hub found [ 6.482020] hub 2-0:1.0: 1 port detected [ 6.491975] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 6.510044] vdd_sata,avdd_plle: disabling [ 6.514764] usb1_vbus: disabling [ 6.518174] ALSA device list: [ 6.521145] #0: NVIDIA Tegra Beaver [ 6.525371] Waiting for root device /dev/mmcblk0p1... [ 6.800765] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 7.786165] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:44]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:45]: got exception: timeout ~$off
[PYBOOT] [beaver 01:46]: Done.
========================================================================
Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 2.289547] 5fc0: c01081b0 c01081b4 60000153 ffffffff [ 2.294582] [<c010b7d4>] (__irq_svc) from [<c01081b4>] (arch_cpu_idle+0x38/0x3c) [ 2.301959] [<c01081b4>] (arch_cpu_idle) from [<c01530f8>] (cpu_startup_entry+0x1c0/0x238) [ 2.310193] [<c01530f8>] (cpu_startup_entry) from [<401015ac>] (0x401015ac) [ 2.317126] CPU3: stopping [ 2.319817] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.7.0-rc3-00240-gc141afd #1 [ 2.327271] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 2.333355] [<c010dfec>] (unwind_backtrace) from [<c010ad18>] (show_stack+0x10/0x14) [ 2.341068] [<c010ad18>] (show_stack) from [<c0326af8>] (dump_stack+0x78/0x8c) [ 2.348265] [<c0326af8>] (dump_stack) from [<c010d2a8>] (handle_IPI+0x198/0x1ac) [ 2.355637] [<c010d2a8>] (handle_IPI) from [<c010150c>] (gic_handle_irq+0x94/0x98) [ 2.363181] [<c010150c>] (gic_handle_irq) from [<c010b7d4>] (__irq_svc+0x54/0x90) [ 2.370635] Exception stack(0xee8b9f88 to 0xee8b9fd0) [ 2.375669] 9f80: 00000001 00000000 00000000 c0113d20 ee8b8000 c0b02454 [ 2.383822] 9fa0: 00000000 00000000 c0a623f8 c0b024b8 c0b4389b c0b024c0 f0816640 ee8b9fd8 [ 2.391972] 9fc0: c01081b0 c01081b4 60000053 ffffffff [ 2.397006] [<c010b7d4>] (__irq_svc) from [<c01081b4>] (arch_cpu_idle+0x38/0x3c) [ 2.404381] [<c01081b4>] (arch_cpu_idle) from [<c01530f8>] (cpu_startup_entry+0x1c0/0x238) [ 2.412616] [<c01530f8>] (cpu_startup_entry) from [<401015ac>] (0x401015ac) [ 2.419550] CPU2: stopping [ 2.422241] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.7.0-rc3-00240-gc141afd #1 [ 2.429695] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 2.435780] [<c010dfec>] (unwind_backtrace) from [<c010ad18>] (show_stack+0x10/0x14) [ 2.443493] [<c010ad18>] (show_stack) from [<c0326af8>] (dump_stack+0x78/0x8c) [ 2.450690] [<c0326af8>] (dump_stack) from [<c010d2a8>] (handle_IPI+0x198/0x1ac) [ 2.458061] [<c010d2a8>] (handle_IPI) from [<c010150c>] (gic_handle_irq+0x94/0x98) [ 2.465606] [<c010150c>] (gic_handle_irq) from [<c010b7d4>] (__irq_svc+0x54/0x90) [ 2.473060] Exception stack(0xee8b7f88 to 0xee8b7fd0) [ 2.478094] 7f80: 00000001 00000000 00000000 c0113d20 ee8b6000 c0b02454 [ 2.486247] 7fa0: 00000000 00000000 c0a623f8 c0b024b8 c0b4389b c0b024c0 eef9ff70 ee8b7fd8 [ 2.494397] 7fc0: c01081b0 c01081b4 60000153 ffffffff [ 2.499431] [<c010b7d4>] (__irq_svc) from [<c01081b4>] (arch_cpu_idle+0x38/0x3c) [ 2.506806] [<c01081b4>] (arch_cpu_idle) from [<c01530f8>] (cpu_startup_entry+0x1c0/0x238) [ 2.515041] [<c01530f8>] (cpu_startup_entry) from [<401015ac>] (0x401015ac) [ 2.521985] ---[ end Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
[PYBOOT] [odroidu3 00:30]: got exception: panic ~$off
[PYBOOT] [odroidu3 00:32]: Done.
========================================================================
Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.947402] mmc0: new high speed MMC card at address 0001 [ 1.953400] smps9: Bringing 0uV into 2100000-2100000uV [ 1.958861] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.963826] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.970274] smsc95xx v1.0.4 [ 1.973288] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.981765] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.988295] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.996287] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.007398] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.015612] ldo9: bypassed regulator has no supply! [ 2.020735] ldo9: failed to get the current voltage(-517) [ 2.026399] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.033027] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, e2:e5:24:eb:5b:ae [ 2.053423] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.079286] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.085684] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.112213] smps9: Bringing 0uV into 2100000-2100000uV [ 2.130970] ldo9: bypassed regulator has no supply! [ 2.136091] ldo9: failed to get the current voltage(-517) [ 2.141757] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.156304] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:02:28 UTC (946684948) [ 2.172165] pbias_mmc_omap5: disabling [ 2.176108] vmmcsdio_fixed: disabling [ 2.180636] Waiting for root device /dev/mmcblk1p2... [ 2.258521] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.394443] hub 1-2:1.0: USB hub found [ 2.398456] hub 1-2:1.0: 3 ports detected [ 2.404342] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.432257] smps9: Bringing 0uV into 2100000-2100000uV [ 2.451062] ldo9: bypassed regulator has no supply! [ 2.456179] ldo9: failed to get the current voltage(-517) [ 2.461845] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:13]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:14]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:15]: Done.
========================================================================
Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.973183] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.979731] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.987729] ldo4: Bringing 0uV into 1800000-1800000uV [ 1.998833] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.006987] ldo9: bypassed regulator has no supply! [ 2.012107] ldo9: failed to get the current voltage(-517) [ 2.017775] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.031941] smsc95xx v1.0.4 [ 2.036068] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.059250] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.065659] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.092960] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 02:54:04:78:2a:98 [ 2.104910] smps9: Bringing 0uV into 2100000-2100000uV [ 2.123793] ldo9: bypassed regulator has no supply! [ 2.128913] ldo9: failed to get the current voltage(-517) [ 2.134582] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.148738] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.177384] smps9: Bringing 0uV into 2100000-2100000uV [ 2.196207] ldo9: bypassed regulator has no supply! [ 2.201321] ldo9: failed to get the current voltage(-517) [ 2.206987] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.221484] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.237387] pbias_mmc_omap5: disabling [ 2.241346] vmmcsdio_fixed: disabling [ 2.245913] Waiting for root device /dev/mmcblk1p2... [ 2.358501] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.494370] hub 1-2:1.0: USB hub found [ 2.498386] hub 1-2:1.0: 3 ports detected [ 2.504323] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.532244] smps9: Bringing 0uV into 2100000-2100000uV [ 2.550986] ldo9: bypassed regulator has no supply! [ 2.556108] ldo9: failed to get the current voltage(-517) [ 2.561770] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:05]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:06]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:07]: Done.
========================================================================
Board omap5uevm-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 3.996823] ldo9: bypassed regulator has no supply! [ 4.001952] ldo9: failed to get the current voltage(-517) [ 4.007622] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.030509] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 4.038079] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 4.044653] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 4.050966] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.057814] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.067405] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.076922] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.083984] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 4.090122] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.096426] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.103289] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.112890] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.122395] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.129444] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.149939] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 4.156228] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 4.163100] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 4.172690] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 4.182183] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 4.189230] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 4.209655] smps9: Bringing 0uV into 2100000-2100000uV [ 4.238033] ldo9: bypassed regulator has no supply! [ 4.243160] ldo9: failed to get the current voltage(-517) [ 4.248832] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.268944] hctosys: unable to open rtc device (rtc0) [ 4.274268] sr_init: No PMIC hook to init smartreflex [ 4.279770] sr_init: platform driver register failed for SR [ 4.307453] pbias_mmc_omap5: disabling [ 4.311418] vmmcsdio_fixed: disabling [ 4.317585] Waiting for root device /dev/mmcblk1p2...
[PYBOOT] [omap5uevm 02:06]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:07]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:08]: Done.
========================================================================
Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.533501] isl29018 7-0044: No cache defaults, reading back from HW [ 1.539853] isl29018 7-0044: Failed to read 1: -6 [ 1.544438] isl29018 7-0044: regmap initialization fails: -6 [ 1.555333] NET: Registered protocol family 10 [ 1.559765] sit: IPv6 over IPv4 tunneling driver [ 1.563341] NET: Registered protocol family 17 [ 1.567346] can: controller area network core (rev 20120528 abi 9) [ 1.573537] NET: Registered protocol family 29 [ 1.577924] can: raw protocol (rev 20120528) [ 1.582173] can: broadcast manager protocol (rev 20120528 t) [ 1.587815] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593541] Key type dns_resolver registered [ 1.597861] ThumbEE CPU extension supported. [ 1.601784] Registering SWP/SWPB emulation handler [ 1.611655] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.617137] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623504] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.628878] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.638981] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.649291] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.654734] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.664919] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.671102] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.676480] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.686199] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708717] Waiting for root device /dev/mmcblk0p1... [ 1.712601] mmc0: tuning execution failed: -5 [ 1.716658] mmc0: error -5 whilst initialising MMC card [ 2.583299] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597451] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.602911] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609282] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614666] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:57]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:58]: got exception: timeout ~$off
[PYBOOT] [pi 01:59]: Done.
========================================================================
Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.538912] isl29018 7-0044: No cache defaults, reading back from HW [ 1.545265] isl29018 7-0044: Failed to read 1: -6 [ 1.549850] isl29018 7-0044: regmap initialization fails: -6 [ 1.560773] NET: Registered protocol family 10 [ 1.565204] sit: IPv6 over IPv4 tunneling driver [ 1.568783] NET: Registered protocol family 17 [ 1.572784] can: controller area network core (rev 20120528 abi 9) [ 1.578975] NET: Registered protocol family 29 [ 1.583361] can: raw protocol (rev 20120528) [ 1.587611] can: broadcast manager protocol (rev 20120528 t) [ 1.593253] can: netlink gateway (rev 20130117) max_hops=1 [ 1.598980] Key type dns_resolver registered [ 1.603306] ThumbEE CPU extension supported. [ 1.607221] Registering SWP/SWPB emulation handler [ 1.617108] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.622591] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.628959] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.634334] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.644434] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.654794] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.660243] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.670425] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.676609] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.681987] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.691714] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.714386] Waiting for root device /dev/mmcblk0p1... [ 1.718268] mmc0: tuning execution failed: -5 [ 1.722323] mmc0: error -5 whilst initialising MMC card [ 2.583673] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597862] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.603323] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609697] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.615080] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:50]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:51]: got exception: timeout ~$off
[PYBOOT] [pi 01:52]: Done.
kernel-build-reports@lists.linaro.org
-
Olof's autobooter