Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.0-10976-gd56a669/
Failed boards:
minnowmax x86-minnowmax_defconfig : FAILED 0:56.03 pi arm-exynos_defconfig : FAILED 0:33.25 pit arm-exynos_defconfig : FAILED 0:32.97 seaboard arm-tegra_defconfig : FAILED 1:50.23 seaboard arm-multi_v7_defconfig : FAILED 2:00.39 snowball arm-u8500_defconfig : FAILED 1:57.07 socfpga arm-multi_v7_defconfig : FAILED 3:04.64
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:15.35 arndale arm-exynos_defconfig : passed 1:26.67 bbb arm-omap2plus_defconfig : passed 1:43.17 bbb arm-multi_v7_defconfig : passed 1:13.60 beaver arm-tegra_defconfig : passed 0:55.84 beaver arm-multi_v7_defconfig : passed 0:56.04 capri arm-bcm_defconfig : passed 0:39.68 capri arm-multi_v7_defconfig : passed 0:46.61 chitra powerpc-pasemi_defconfig : passed 1:17.81 chitra powerpc-ppc64_defconfig : warnings 2:10.17 colombus arm-sunxi_defconfig : passed 0:57.01 colombus arm-multi_v7_defconfig : passed 1:21.89 colombus arm-multi_lpae_defconfig : passed 1:06.78 cosmic arm-imx_v6_v7_defconfig : passed 1:58.99 cosmic arm-multi_v7_defconfig : passed 1:31.31 cubie arm-sunxi_defconfig : passed 0:57.69 cubie arm-multi_v7_defconfig : passed 1:03.92 cubie2 arm-sunxi_defconfig : passed 0:56.66 cubie2 arm-multi_v7_defconfig : passed 1:13.10 cubie2 arm-multi_lpae_defconfig : passed 1:06.55 cubox arm-multi_v7_defconfig : passed 1:07.85 cubox arm-mvebu_v7_defconfig : passed 1:24.86 dalmore arm-tegra_defconfig : passed 1:23.35 dalmore arm-multi_v7_defconfig : passed 1:23.95 dalmore arm-multi_lpae_defconfig : passed 1:26.11 hummingboard arm-imx_v6_v7_defconfig : passed 1:21.58 hummingboard arm-multi_v7_defconfig : passed 1:22.29 jetsontk1 arm-tegra_defconfig : passed 0:58.73 jetsontk1 arm-multi_v7_defconfig : passed 0:59.41 jetsontk1 arm-multi_lpae_defconfig : passed 1:16.59 odroidu3 arm-exynos_defconfig : passed 0:58.70 omap5uevm arm-omap2plus_defconfig : passed 1:03.88 omap5uevm arm-multi_v7_defconfig : passed 1:12.27 omap5uevm arm-multi_lpae_defconfig : passed 1:11.88 pandaes arm-omap2plus_defconfig : warnings 1:38.25 pandaes arm-multi_v7_defconfig : passed 1:34.58 pi arm-multi_v7_defconfig : passed 0:51.53 pi arm-multi_lpae_defconfig : passed 0:56.71 pit arm-multi_v7_defconfig : passed 0:50.46 pit arm-multi_lpae_defconfig : passed 0:55.34 rk3288evb arm-multi_v7_defconfig : passed 0:52.59 rk3288evb arm-multi_lpae_defconfig : passed 0:48.88 sama5 arm-sama5_defconfig : passed 1:18.78 snowball arm-multi_v7_defconfig : passed 2:27.13 socfpga arm-socfpga_defconfig : passed 1:09.73 trimslice arm-tegra_defconfig : passed 0:55.50 trimslice arm-multi_v7_defconfig : passed 0:59.34 wandboard arm-imx_v6_v7_defconfig : passed 1:03.18 wandboard arm-multi_v7_defconfig : passed 1:56.49
Offline boards:
arndale arm-multi_v7_defconfig : OFFLINE 1:07.25 arndale arm-multi_lpae_defconfig : OFFLINE 1:09.35 parallella arm-multi_v7_defconfig : OFFLINE 1:25.78 snow arm-exynos_defconfig : OFFLINE 1:44.79 snow arm-multi_v7_defconfig : OFFLINE 1:44.50 snow arm-multi_lpae_defconfig : OFFLINE 1:43.96
Board legend is available at http://arm-soc.lixom.net/boards.html
Board minnowmax-x86-minnowmax_defconfig failure log: -------------------------------------------------
Connected to minnowmax console [channel connected] (~$quit to exit) ~$open
~$hardreset
Command(minnowmax console)> open console already open
Command(minnowmax console)> hardreset (user:build) Reset target node minnowmax status: off node minnowmax status: on
[PYBOOT] [minnowmax 00:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [minnowmax 00:54]: got exception: timeout ~$off
[PYBOOT] [minnowmax 00:55]: Done. Board pi-arm-exynos_defconfig failure log: -------------------------------------------------
[ 3.565848] exynos-dp 145b0000.dp-controller: Link Training success! [ 3.620930] Console: switching to colour frame buffer device 274x77 [ 3.729793] exynos-drm exynos-drm: fb0: frame buffer device [ 3.735430] exynos-drm exynos-drm: registered panic notifier [ 3.753069] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 3.758006] input: gpio-keys as /devices/platform/gpio-keys/input/input2 [ 3.765740] max77802-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 3.792173] TPS65090_RAILSLDO2: disabling [ 3.794750] TPS65090_RAILSLDO1: disabling [ 3.798719] TPS65090_RAILSDCDC3: disabling [ 3.802814] vdd_1v2_2: disabling [ 3.806624] ALSA device list: [ 3.808951] No soundcard[ 3.813644] EXT3-fs (mmcblk0p1): error: couldn't mount because of unsupported optional features (240) [ 3.821844] EXT2-fs (mmcblk0p1): error: couldn't mount because of unsupported optional features (240) [ 3.834225] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.840962] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.849947] devtmpfs: mounted [ 3.851635] Freeing unused kernel memory: 344K (c072a000 - c0780000)
[PYBOOT] [pi 00:30]: kernel: finished booting, starting userspace. [ 3.861701] Unhandled fault: imprecise external abort (0x1406) at 0x00000000 [ 3.867266] pgd = ed330000 [ 3.869955] [00000000] *pgd=6d2fe831, *pte=00000000, *ppte=00000000 [ 3.883116] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 [ 3.883116] [ 3.890761] CPU: 0 PID: 1 Comm: init Not tainted 4.0.0-10976-gd56a669 #1 [ 3.897437] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 3.903528] [<c00153ec>] (unwind_backtrace) from [<c001231c>] (show_stack+0x10/0x14) [ 3.911238] [<c001231c>] (show_stack) from [<c051c2e8>] (dump_stack+0x84/0xc4) [ 3.918435] [<c051c2e8>] (dump_stack) from [<c051a8ec>] (panic+0x9c/0x200) [ 3.925289] [<c051a8ec>] (panic) from [<c00242e8>] (complete_and_exit+0x0/0x1c) [ 3.932573] [<c00242e8>] (complete_and_exit) from [<00000000>] ( (null)) [ 3.939340] drm_kms_helper: panic occurred, switching back to text console [ 3.946216] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 [ 3.946216]
[PYBOOT] [pi 00:31]: got exception: panic ~$off
[PYBOOT] [pi 00:32]: Done. Board pit-arm-exynos_defconfig failure log: -------------------------------------------------
[ 3.989392] exynos-dp 145b0000.dp-controller: Link Training success! [ 4.007495] Console: switching to colour frame buffer device 195x54 [ 4.074109] exynos-drm exynos-drm: fb0: frame buffer device [ 4.079747] exynos-drm exynos-drm: registered panic notifier [ 4.098162] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 4.103101] input: gpio-keys as /devices/platform/gpio-keys/input/input2 [ 4.110822] max77802-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 4.136383] TPS65090_RAILSLDO2: disabling [ 4.138952] TPS65090_RAILSLDO1: disabling [ 4.142903] TPS65090_RAILSDCDC3: disabling [ 4.147038] vdd_1v2_2: disabling [ 4.150813] ALSA device list: [ 4.153156] No soundcard[ 4.157816] EXT3-fs (mmcblk0p1): error: couldn't mount because of unsupported optional features (240) [ 4.166034] EXT2-fs (mmcblk0p1): error: couldn't mount because of unsupported optional features (240) [ 4.178949] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 4.185687] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 4.194626] devtmpfs: mounted [ 4.196304] Freeing unused kernel memory: 344K (c072a000 - c0780000)
[PYBOOT] [pit 00:30]: kernel: finished booting, starting userspace. [ 4.205442] Unhandled fault: imprecise external abort (0x1406) at 0x00000000 [ 4.211002] pgd = ed324000 [ 4.213691] [00000000] *pgd=6d302831, *pte=00000000, *ppte=00000000 [ 4.228208] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 [ 4.228208] [ 4.235859] CPU: 0 PID: 1 Comm: init Not tainted 4.0.0-10976-gd56a669 #1 [ 4.242535] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 4.248626] [<c00153ec>] (unwind_backtrace) from [<c001231c>] (show_stack+0x10/0x14) [ 4.256337] [<c001231c>] (show_stack) from [<c051c2e8>] (dump_stack+0x84/0xc4) [ 4.263532] [<c051c2e8>] (dump_stack) from [<c051a8ec>] (panic+0x9c/0x200) [ 4.270387] [<c051a8ec>] (panic) from [<c00242e8>] (complete_and_exit+0x0/0x1c) [ 4.277672] [<c00242e8>] (complete_and_exit) from [<00000000>] ( (null)) [ 4.284437] drm_kms_helper: panic occurred, switching back to text console [ 4.291314] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 [ 4.291314]
[PYBOOT] [pit 00:31]: got exception: panic ~$off
[PYBOOT] [pit 00:32]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.843505] input: NVIDIA Tegra Seaboard Mic Jack as /devices/soc0/sound/sound/card0/input3 [ 1.853003] NET: Registered protocol family 17 [ 1.857454] can: controller area network core (rev 20120528 abi 9) [ 1.863705] NET: Registered protocol family 29 [ 1.868166] can: raw protocol (rev 20120528) [ 1.872432] can: broadcast manager protocol (rev 20120528 t) [ 1.878113] can: netlink gateway (rev 20130117) max_hops=1 [ 1.880072] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.884255] mmc0: new SDIO card at address 0001 [ 1.893999] Key type dns_resolver registered [ 1.898585] ThumbEE CPU extension supported. [ 1.902877] Registering SWP/SWPB emulation handler [ 1.913277] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.920516] 54280000.hdmi supply hdmi not found, using dummy regulator [ 1.930963] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.937429] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.942854] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.950612] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.962711] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.969380] hub 3-0:1.0: USB hub found [ 1.973168] hub 3-0:1.0: 1 port detected [ 1.980916] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.987533] [drm] No driver support for vblank timestamp query. [ 2.088342] Console: switching to colour frame buffer device 170x48 [ 2.117746] drm drm: fb0: frame buffer device [ 2.122189] drm drm: registered panic notifier [ 2.137740] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.145097] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.152317] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.168438] vdd_1v2: disabling [ 2.171509] vdd_1v5: disabling [ 2.175114] ALSA device list: [ 2.178112] #0: NVIDIA Tegra Seaboard
[PYBOOT] [seaboard 01:57]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:58]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:59]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------
[ 1.651173] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.667194] input: NVIDIA Tegra Seaboard Headphone Jack as /devices/soc0/sound/sound/card0/input2 [ 1.677981] input: NVIDIA Tegra Seaboard Mic Jack as /devices/soc0/sound/sound/card0/input3 [ 1.678668] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.684993] mmc0: new SDIO card at address 0001 [ 1.700084] NET: Registered protocol family 10 [ 1.707588] mip6: Mobile IPv6 [ 1.710572] sit: IPv6 over IPv4 tunneling driver [ 1.722108] NET: Registered protocol family 17 [ 1.726644] NET: Registered protocol family 15 [ 1.731112] can: controller area network core (rev 20120528 abi 9) [ 1.737712] NET: Registered protocol family 29 [ 1.742207] can: raw protocol (rev 20120528) [ 1.746488] can: broadcast manager protocol (rev 20120528 t) [ 1.752215] can: netlink gateway (rev 20130117) max_hops=1 [ 1.758018] Bluetooth: RFCOMM socket layer initialized [ 1.763221] Bluetooth: RFCOMM ver 1.11 [ 1.767007] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.772375] Bluetooth: BNEP socket layer initialized [ 1.777349] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.783319] Bluetooth: HIDP socket layer initialized [ 1.790058] Registering SWP/SWPB emulation handler [ 1.807172] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.814020] 54280000.hdmi supply hdmi not found, using dummy regulator [ 1.825353] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.831870] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.837340] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.845523] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.861877] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.871478] hub 3-0:1.0: USB hub found [ 1.875373] hub 3-0:1.0: 1 port detected [ 1.889786] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.896487] [drm] No driver support for vblank timestamp query.
[PYBOOT] [seaboard 01:47]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:48]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:49]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 1.346313] db8500-thermal db8500-thermal.0: Thermal zone device registered. [ 1.353698] genirq: Flags mismatch irq 342. 00006000 (dbx500_temp_low) vs. 00006000 (dbx500_temp_low) [ 1.362976] db8500-thermal 801573c0.thermal: Failed to allocate temp low irq. [ 1.370147] db8500-thermal: probe of 801573c0.thermal failed with error -16 [ 1.377868] ux500_wdt ux500_wdt: initialized [ 1.382385] dbx500-cpufreq: Available frequencies: [ 1.387176] 200 Mhz [ 1.389434] 400 Mhz [ 1.391754] 800 Mhz [ 1.394012] 1000 Mhz [ 1.396453] cpufreq: __cpufreq_add_dev: CPU0: Running at unlisted freq: 998400 KHz [ 1.404357] cpufreq: __cpufreq_add_dev: CPU0: Unlisted initial frequency changed to: 1000000 KHz [ 1.417938] mmci-pl18x 80126000.sdi0_per1: Got CD GPIO [ 1.423797] V-MMC-SD: supplied by ab8500-ext-supply3 [ 1.431823] mmci-pl18x 80118000.sdi1_per2: No vmmc regulator found [ 1.437988] mmci-pl18x 80118000.sdi1_per2: No vqmmc regulator found [ 1.444335] mmci-pl18x 80118000.sdi1_per2: mmc0: PL180 manf 80 rev4 at 0x80118000 irq 403,0 (pio) [ 1.453369] mmci-pl18x 80118000.sdi1_per2: DMA channels RX dma0chan0, TX dma0chan1 [ 1.513214] mmci-pl18x 80005000.sdi2_per3: No vmmc regulator found [ 1.519500] mmci-pl18x 80005000.sdi2_per3: No vqmmc regulator found [ 1.526031] mmci-pl18x 80005000.sdi2_per3: mmc1: PL180 manf 80 rev4 at 0x80005000 irq 404,0 (pio) [ 1.535034] mmci-pl18x 80005000.sdi2_per3: DMA channels RX dma0chan2, TX dma0chan3 [ 1.584655] V-eMMC1: supplied by ab8500-ext-supply3 [ 1.590087] mmci-pl18x 80114000.sdi4_per2: No vqmmc regulator found [ 1.596801] mmci-pl18x 80114000.sdi4_per2: mmc2: PL180 manf 80 rev4 at 0x80114000 irq 405,0 (pio) [ 1.605834] mmci-pl18x 80114000.sdi4_per2: DMA channels RX dma0chan4, TX dma0chan5 [ 22.610870] INFO: rcu_preempt detected stalls on CPUs/tasks: [ 22.616516] 1: (0 ticks this GP) idle=c21/1/0 softirq=353/353 fqs=0 [ 22.622955] (detected by 0, t=2102 jiffies, g=-234, c=-235, q=1) [ 22.629058] Task dump for CPU 1: [ 22.632293] swapper/1 R running 0 0 1 0x00000000 [ 22.638671] [<c0474048>] (__schedule) from [<c06484d4>] (cpu_idle_force_poll+0x0/0x4) [ 22.646484] rcu_preempt kthread starved for 2102 jiffies!
[PYBOOT] [snowball 01:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:55]: got exception: timeout ~$off
[PYBOOT] [snowball 01:56]: Done. Board socfpga-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.188739] dw_mmc ff704000.dwmmc0: Version ID is 240a [ 1.193895] dw_mmc ff704000.dwmmc0: DW MMC controller at irq 30, 32 bit host data width, 1024 deep fifo [ 1.203400] dw_mmc ff704000.dwmmc0: Got CD GPIO [ 1.237510] dw_mmc ff704000.dwmmc0: 1 slots initialized [ 1.243252] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.249723] ledtrig-cpu: registered to indicate activity on CPUs [ 1.255903] usbcore: registered new interface driver usbhid [ 1.261464] usbhid: USB HID core driver [ 1.267267] usbcore: registered new interface driver snd-usb-audio [ 1.275294] NET: Registered protocol family 17 [ 1.279772] can: controller area network core (rev 20120528 abi 9) [ 1.286003] NET: Registered protocol family 29 [ 1.290455] can: raw protocol (rev 20120528) [ 1.294733] can: broadcast manager protocol (rev 20120528 t) [ 1.300393] can: netlink gateway (rev 20130117) max_hops=1 [ 1.306191] Key type dns_resolver registered [ 1.310575] ThumbEE CPU extension supported. [ 1.314855] Registering SWP/SWPB emulation handler [ 1.321634] rtc-ds1307 0-0068: setting system clock to 2000-01-01 00:00:23 UTC (946684823) [ 1.331814] ALSA device list: [ 1.334801] No soundcards found. [ 1.338853] Waiting for root device /dev/mmcblk0p2... [ 1.394984] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 50000000Hz, actual 50000000HZ div = 2) [ 1.404841] mmc0: new high speed SDHC card at address 0002 [ 1.410627] mmcblk0: mmc0:0002 SD8GB 7.43 GiB [ 1.417566] mmcblk0: p1 p2 p3 [ 1.449001] EXT4-fs (mmcblk0p2): mounting ext3 file system using the ext4 subsystem [ 1.486341] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.494444] VFS: Mounted root (ext3 filesystem) readonly on device 179:2. [ 1.528196] devtmpfs: mounted [ 1.531753] Freeing unused kernel memory: 820K (c0d91000 - c0e5e000)
[PYBOOT] [socfpga 00:31]: kernel: finished booting, starting userspace.
[PYBOOT] [socfpga 03:01]: Timed out waiting for "<type 'str'>":
[PYBOOT] [socfpga 03:02]: got exception: timeout ~$off
[PYBOOT] [socfpga 03:04]: Done.
kernel-build-reports@lists.linaro.org