Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20160512/
Failed boards:
arndale multi_v7_nosmp_defconfig : NO BUILD bbb arm-omap2plus_defconfig : FAILED 1:54.68 bbb arm-multi_v7_defconfig : FAILED 1:58.13 bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:45.81 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:43.85 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:48.28 beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD chitra powerpc-pasemi_defconfig : BUILD FAILED colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.48 cosmic arm-multi_v7_defconfig : FAILED 2:15.73 cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore arm-tegra_defconfig : FAILED 1:54.08 dalmore arm-multi_v7_defconfig : FAILED 2:02.49 dalmore arm-multi_lpae_defconfig : FAILED 2:05.95 dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:49.63 omap5uevm arm-multi_v7_defconfig : FAILED 3:11.85 omap5uevm arm-multi_lpae_defconfig : FAILED 2:10.69 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-multi_v7_defconfig : FAILED 2:01.20 pi arm-multi_lpae_defconfig : FAILED 1:52.00 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard arm-tegra_defconfig : FAILED 1:52.24 seaboard arm-multi_v7_defconfig : FAILED 1:54.66 seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball arm-u8500_defconfig : FAILED 1:56.99 snowball arm-multi_v7_defconfig : FAILED 2:13.90 snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard multi_v7_nosmp_defconfig : NO BUILD
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:12.24 arndale arm-exynos_defconfig : passed 1:32.70 arndale arm-multi_v7_defconfig : passed 1:31.48 arndale arm-multi_lpae_defconfig : passed 1:24.70 capri arm-bcm_defconfig : passed 0:56.51 capri arm-multi_v7_defconfig : passed 0:55.39 chitra powerpc-ppc64_defconfig : passed 3:06.40 colombus arm-sunxi_defconfig : passed 2:32.93 colombus arm-multi_v7_defconfig : passed 2:37.94 colombus arm-multi_lpae_defconfig : passed 2:30.41 cubie arm-sunxi_defconfig : passed 0:57.92 cubie arm-multi_v7_defconfig : passed 0:49.88 cubie2 arm-sunxi_defconfig : passed 1:00.20 cubie2 arm-multi_v7_defconfig : passed 0:55.49 cubie2 arm-multi_lpae_defconfig : passed 0:55.64 cubox arm-multi_v7_defconfig : passed 1:24.29 cubox arm-mvebu_v7_defconfig : passed 1:01.19 hummingboard arm-imx_v6_v7_defconfig : passed 1:29.53 hummingboard arm-multi_v7_defconfig : passed 1:16.40 jetsontk1 arm-tegra_defconfig : warnings 0:59.08 jetsontk1 arm-multi_v7_defconfig : warnings 0:56.92 jetsontk1 arm-multi_lpae_defconfig : warnings 1:00.81 omap5uevm arm-omap2plus_defconfig : passed 1:05.91 pandaes arm-omap2plus_defconfig : warnings 1:39.89 pandaes arm-multi_v7_defconfig : passed 1:48.85 pi arm-exynos_defconfig : passed 2:09.74 pit arm-exynos_defconfig : passed 2:10.85 pit arm-multi_v7_defconfig : passed 2:19.15 pit arm-multi_lpae_defconfig : passed 2:20.63 seattle arm64-defconfig : passed 2:26.33 snow arm-exynos_defconfig : passed 2:07.87 snow arm-multi_v7_defconfig : passed 2:03.63 snow arm-multi_lpae_defconfig : passed 2:04.88 trimslice arm-tegra_defconfig : warnings 1:34.63 wandboard arm-imx_v6_v7_defconfig : passed 1:16.73 wandboard arm-multi_v7_defconfig : passed 1:05.01
Offline boards:
beaver arm-tegra_defconfig : OFFLINE 2:11.73 beaver arm-multi_v7_defconfig : OFFLINE 2:19.17 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 2:15.55 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 2:27.84 parallella arm-multi_v7_defconfig : OFFLINE 2:27.02 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:47.09 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:51.75 sama5 arm-sama5_defconfig : OFFLINE 2:25.38 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:13.64 socfpga arm-socfpga_defconfig : OFFLINE 2:16.17 socfpga arm-multi_v7_defconfig : OFFLINE 2:19.47 trimslice arm-multi_v7_defconfig : OFFLINE 2:22.88
Board legend is available at http://arm-soc.lixom.net/boards.html
Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.565441] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.631129] Synopsys Designware Multimedia Card Interface Driver [ 1.638906] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.648765] ledtrig-cpu: registered to indicate activity on CPUs [ 1.655999] usbcore: registered new interface driver usbhid [ 1.661930] usbhid: USB HID core driver [ 1.673866] NET: Registered protocol family 10 [ 1.680410] sit: IPv6 over IPv4 tunneling driver [ 1.686544] NET: Registered protocol family 17 [ 1.691299] can: controller area network core (rev 20120528 abi 9) [ 1.697940] NET: Registered protocol family 29 [ 1.702649] can: raw protocol (rev 20120528) [ 1.707161] can: broadcast manager protocol (rev 20120528 t) [ 1.713147] can: netlink gateway (rev 20130117) max_hops=1 [ 1.719907] Key type dns_resolver registered [ 1.724777] omap_voltage_late_init: Voltage driver support not added [ 1.731726] ThumbEE CPU extension supported. [ 1.736274] Registering SWP/SWPB emulation handler [ 1.781215] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.787667] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.795393] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.802729] mmc1: new MMC card at address 0001 [ 1.808458] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.813665] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.821636] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.829459] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.837219] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.844996] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.852335] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.858383] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.866716] hctosys: unable to open rtc device (rtc0) [ 1.879563] mmcblk1: p1 p2 [ 1.886628] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:55]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:56]: got exception: timeout ~$off
[PYBOOT] [bbb 01:57]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.053765] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.059883] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.066210] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.073085] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.082681] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.092181] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.099196] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.142432] ledtrig-cpu: registered to indicate activity on CPUs [ 2.151124] oprofile: using arm/armv7 [ 2.156095] Initializing XFRM netlink socket [ 2.161221] NET: Registered protocol family 10 [ 2.171615] sit: IPv6 over IPv4 tunneling driver [ 2.180611] NET: Registered protocol family 17 [ 2.185528] NET: Registered protocol family 15 [ 2.190733] Key type dns_resolver registered [ 2.195581] omap_voltage_late_init: Voltage driver support not added [ 2.202318] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.210785] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.220386] ThumbEE CPU extension supported. [ 2.225003] Registering SWP/SWPB emulation handler [ 2.230024] SmartReflex Class3 initialized [ 2.298166] mmc1: new MMC card at address 0001 [ 2.310939] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.321011] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.332243] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.350004] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.357491] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.365924] mmcblk1: p1 p2 [ 2.387616] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.396036] hctosys: unable to open rtc device (rtc0) [ 2.401344] sr_init: No PMIC hook to init smartreflex [ 2.407220] sr_init: platform driver register failed for SR [ 2.447758] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.166984] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 2.181808] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.188881] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.215699] rtc-ds1307 2-006f: SET TIME! [ 2.221469] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.228233] rtc-ds1307 2-006f: 64 bytes nvram [ 2.232843] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.241129] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.246915] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.255154] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.264317] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.271204] hub 1-0:1.0: USB hub found [ 2.275160] hub 1-0:1.0: 1 port detected [ 2.279564] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.285342] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.293459] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.302477] hub 2-0:1.0: USB hub found [ 2.306447] hub 2-0:1.0: 1 port detected [ 2.312527] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.376735] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.394544] aic_dvdd_fixed: disabling [ 2.399257] Waiting for root device /dev/mmcblk0p1... [ 2.417188] mmc1: new MMC card at address 0001 [ 2.422223] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.427132] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.433484] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.441693] mmcblk1: p1 [ 2.585196] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.741594] hub 1-1:1.0: USB hub found [ 2.745580] hub 1-1:1.0: 4 ports detected [ 2.825228] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.853588] hub 2-1:1.0: USB hub found [ 2.857575] hub 2-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:46]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:47]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.171001] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 2.185715] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.192791] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.215344] rtc-ds1307 2-006f: SET TIME! [ 2.221082] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.227835] rtc-ds1307 2-006f: 64 bytes nvram [ 2.232445] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.240703] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.246486] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.254723] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.263888] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.270772] hub 1-0:1.0: USB hub found [ 2.274723] hub 1-0:1.0: 1 port detected [ 2.279128] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.284906] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.293011] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.302043] hub 2-0:1.0: USB hub found [ 2.306013] hub 2-0:1.0: 1 port detected [ 2.312151] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.376427] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.394681] aic_dvdd_fixed: disabling [ 2.399367] Waiting for root device /dev/mmcblk0p1... [ 2.421838] mmc1: new MMC card at address 0001 [ 2.426868] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.431777] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.438127] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.446331] mmcblk1: p1 [ 2.584854] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.741157] hub 1-1:1.0: USB hub found [ 2.745142] hub 1-1:1.0: 4 ports detected [ 2.824885] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.853148] hub 2-1:1.0: USB hub found [ 2.857136] hub 2-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:43]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 4.277935] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 4.284228] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.291127] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 4.301524] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 4.306371] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.312680] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.319535] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.329138] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.338637] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.345682] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.387444] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 4.393747] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 4.400616] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 4.410211] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 4.419710] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 4.426755] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 4.432871] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 4.439181] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 4.446027] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 4.455628] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 4.465135] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 4.472186] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 4.517586] hctosys: unable to open rtc device (rtc0) [ 4.522884] sr_init: No PMIC hook to init smartreflex [ 4.528422] sr_init: platform driver register failed for SR [ 4.563996] mmc1: new MMC card at address 0001 [ 4.571013] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 4.574697] aic_dvdd_fixed: disabling [ 4.580020] ldousb: disabling [ 4.580467] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 4.581150] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 4.597836] mmcblk1: p1 [ 4.605457] Waiting for root device /dev/mmcblk0p1...
[PYBOOT] [beagleboard-x15 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:44]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:45]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.425999] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.500223] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.510553] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.584781] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.595103] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.669278] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.679598] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.753833] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.764161] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.838334] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.848664] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.922891] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.933243] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.007448] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.017779] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.092025] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.102346] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.176520] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.186845] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.261071] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.271389] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.345609] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.355935] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.430154] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.440480] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.514709] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.525033] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.599204] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.609526] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.683763] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.694090] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.768259] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.778582] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.068703] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.142686] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.152764] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.226743] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.236822] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.310803] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.320883] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.394862] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.404943] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.478932] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.489012] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.562996] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.573083] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.647075] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.657146] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.731129] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.741197] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.815180] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.825247] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.899273] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.909335] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.983321] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.993392] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.067372] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.077444] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.151425] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.161505] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.235487] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.245564] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.319547] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.329623] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.403601] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.413684] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:12]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:13]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:14]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.810816] can: netlink gateway (rev 20130117) max_hops=1 [ 2.817845] Key type dns_resolver registered [ 2.824221] ThumbEE CPU extension supported. [ 2.828613] Registering SWP/SWPB emulation handler [ 2.843146] usb1_vbus: supplied by vdd-sys-5v0 [ 2.853441] usb2_vbus: supplied by vdd-sys-5v0 [ 2.872977] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.897316] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.904070] [drm] No driver support for vblank timestamp query. [ 2.912314] mmc1: new MMC card at address 0001 [ 2.920445] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.926443] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.934957] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.942129] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.953470] mmcblk1: p1 [ 3.084212] Console: switching to colour frame buffer device 240x75 [ 3.173545] drm drm: fb0: frame buffer device [ 3.196249] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.211384] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.216980] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.225791] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.241275] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.251677] hub 1-0:1.0: USB hub found [ 3.255677] hub 1-0:1.0: 1 port detected [ 3.266398] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.281073] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.343192] dvdd_ts: disabling [ 3.346450] usb1_vbus: disabling [ 3.349714] vdd_cam_1v8_reg: disabling [ 3.357537] Waiting for root device /dev/mmcblk0p1... [ 3.566283] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.544185] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 65.131488] random: nonblocking pool is initialized
[PYBOOT] [dalmore 02:03]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 02:04]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:05]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.810748] can: netlink gateway (rev 20130117) max_hops=1 [ 2.817765] Key type dns_resolver registered [ 2.824141] ThumbEE CPU extension supported. [ 2.828529] Registering SWP/SWPB emulation handler [ 2.844459] usb1_vbus: supplied by vdd-sys-5v0 [ 2.854922] usb2_vbus: supplied by vdd-sys-5v0 [ 2.873535] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.895965] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.902747] [drm] No driver support for vblank timestamp query. [ 2.911414] mmc1: new MMC card at address 0001 [ 2.919636] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.925420] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.935141] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.943807] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.955738] mmcblk1: p1 [ 3.081464] Console: switching to colour frame buffer device 240x75 [ 3.170480] drm drm: fb0: frame buffer device [ 3.191127] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.206244] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.211833] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.220373] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.236161] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.246465] hub 1-0:1.0: USB hub found [ 3.250464] hub 1-0:1.0: 1 port detected [ 3.261024] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.275549] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.338671] dvdd_ts: disabling [ 3.341892] usb1_vbus: disabling [ 3.345150] vdd_cam_1v8_reg: disabling [ 3.352849] Waiting for root device /dev/mmcblk0p1... [ 3.561166] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.539890] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 64.896378] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:59]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 02:00]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:01]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 5.632494] Bluetooth: RFCOMM socket layer initialized [ 5.637718] Bluetooth: RFCOMM ver 1.11 [ 5.641562] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.647056] Bluetooth: BNEP socket layer initialized [ 5.652121] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 5.658122] Bluetooth: HIDP socket layer initialized [ 5.664435] Key type dns_resolver registered [ 5.673882] Registering SWP/SWPB emulation handler [ 5.691474] usb1_vbus: supplied by vdd-sys-5v0 [ 5.701600] usb2_vbus: supplied by vdd-sys-5v0 [ 5.717216] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 5.746503] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 5.753316] [drm] No driver support for vblank timestamp query. [ 5.931097] Console: switching to colour frame buffer device 240x75 [ 6.018786] drm drm: fb0: frame buffer device [ 6.062181] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 6.071333] tegra-ehci 7d008000.usb: EHCI Host Controller [ 6.077212] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 6.086427] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 6.112180] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 6.126117] hub 1-0:1.0: USB hub found [ 6.130071] hub 1-0:1.0: 1 port detected [ 6.144055] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 6.160028] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 6.248028] dvdd_ts: disabling [ 6.251163] usb1_vbus: disabling [ 6.254579] vdd_cam_1v8_reg: disabling [ 6.259153] ALSA device list: [ 6.262215] #0: NVIDIA Tegra Dalmore [ 6.268068] Waiting for root device /dev/mmcblk0p1... [ 6.452162] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 7.476575] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 63.372140] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:52]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:53]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.787797] usbhid: USB HID core driver [ 1.796142] NET: Registered protocol family 10 [ 1.796745] sit: IPv6 over IPv4 tunneling driver [ 1.801056] NET: Registered protocol family 17 [ 1.805082] NET: Registered protocol family 15 [ 1.809528] Key type dns_resolver registered [ 1.813836] Registering SWP/SWPB emulation handler [ 1.829948] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.832276] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.839688] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.846843] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.853418] [drm] No driver support for vblank timestamp query. [ 1.859322] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.865728] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.870877] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.877633] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 25000000Hz, actual 22000000HZ div = 1) [ 1.886662] mmc1: new MMC card at address 0001 [ 1.891464] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.895659] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.901535] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.907432] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.913412] max98090 1-0010: MAX98090 REVID=0x43 [ 1.915514] mmcblk1: p1 p2 [ 1.922587] max98090 1-0010: use default 2.8v micbias [ 1.931566] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.939931] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.974188] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 1.990353] VDD10_HDMI_1.0V: disabling [ 1.991041] vdd_g3d: disabling [ 1.992120] BUCK8_2.8V: disabling [ 1.996035] ALSA device list: [ 1.997773] #0: Odroid-U3 [ 2.001388] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:47]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:49]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.259449] r3 : 00000000 r2 : 00010000 r1 : 00000000 r0 : ffff1750 [ 2.266280] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 2.273838] Control: 10c5387d Table: 8020406a DAC: 00000051 [ 2.279849] Process swapper/0 (pid: 0, stack limit = 0xc1300220) [ 2.286132] Stack: (0xc1301e78 to 0xc1302000) [ 2.290689] 1e60: 80befc00 00000000 [ 2.299251] 1e80: c1301e94 c058fdf4 ffff1750 c06fa8b4 77359400 00000000 00000000 eefc8e90 [ 2.307811] 1ea0: 00000000 ffff1750 00000001 80dbccfd 00000000 80befc00 00000000 c03a6764 [ 2.316370] 1ec0: 00000000 c0ef3eb4 00000000 ee1840c0 eefcde40 00000000 80dbccfd 00000000 [ 2.324928] 1ee0: ffffffff 7fffffff c1302510 ffffe000 00000000 00000000 00000001 ee008000 [ 2.333488] 1f00: fa213000 c140d568 c1302510 c0346520 c12134dc c03854d8 c1302870 c13405b8 [ 2.342049] 1f20: fa21200c c1301f50 fa212000 c03017a0 c0308780 a0000013 ffffffff c1301f84 [ 2.350614] 1f40: c1214580 c1302508 c140d568 c030c514 00000001 00000000 ea000013 f0880000 [ 2.359175] 1f60: c1300000 c13024a4 00000000 00000000 c1214580 c1302508 c140d568 c1302510 [ 2.367738] 1f80: 60000013 c1301fa0 c032b054 c0308780 a0000013 ffffffff 00000051 c030877c [ 2.376296] 1fa0: c1300000 c0379158 c1301fb4 c1301fa8 00000000 ffffffff 00000000 c1100c50 [ 2.384853] 1fc0: ffffffff ffffffff 00000000 c1100684 00000000 c11a6a30 c140f5d4 c1302480 [ 2.393413] 1fe0: c11a6a2c c130768c 8020406a 412fc0f2 00000000 8020807c 00000000 00000000 [ 2.401979] [<c0b8861c>] (_raw_spin_lock) from [<c0395938>] (get_next_timer_interrupt+0x64/0x2f4) [ 2.411269] [<c0395938>] (get_next_timer_interrupt) from [<c03a6764>] (__tick_nohz_idle_enter+0x2f8/0x414) [ 2.421382] [<c03a6764>] (__tick_nohz_idle_enter) from [<c0346520>] (irq_exit+0xc8/0x114) [ 2.429946] [<c0346520>] (irq_exit) from [<c03854d8>] (__handle_domain_irq+0x60/0xb4) [ 2.438145] [<c03854d8>] (__handle_domain_irq) from [<c03017a0>] (gic_handle_irq+0x54/0x98) [ 2.446887] [<c03017a0>] (gic_handle_irq) from [<c030c514>] (__irq_svc+0x54/0x70) [ 2.454713] Exception stack(0xc1301f50 to 0xc1301f98) [ 2.459997] 1f40: 00000001 00000000 ea000013 f0880000 [ 2.468554] 1f60: c1300000 c13024a4 00000000 00000000 c1214580 c1302508 c140d568 c1302510 [ 2.477115] 1f80: 60000013 c1301fa0 c032b054 c0308780 a0000013 ffffffff [ 2.484039] [<c030c514>] (__irq_svc) from [<c0308780>] (arch_cpu_idle+0x20/0x3c) [ 2.491782] [<c0308780>] (arch_cpu_idle) from [<c0379158>] (cpu_startup_entry+0x1bc/0x218) [ 2.500435] [<c0379158>] (cpu_startup_entry) from [<c1100c50>] (start_kernel+0x374/0x380) [ 2.509001] [<c1100c50>] (start_kernel) from [<8020807c>] (0x8020807c) [ 2.515834] Code: eaffffab f590f000 e1903f9f e2832801 (e1801f92) [ 2.522212] ---[ end trace e9d391d72da83e[ 2.522214] Internal error: Oops: 5 [#2] SMP [PYBOOT] [omap5uevm 02:08]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:09]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:10]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.037034] ldo2: Bringing 0uV into 2800000-2800000uV [ 2.043431] LDO3: supplied by vdds_1v8_main [ 2.049431] LDO4: supplied by vdds_1v8_main [ 2.054146] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.060516] LDO5: supplied by vsys_cobra [ 2.066285] LDO6: supplied by vdds_1v8_main [ 2.073809] LDO7: supplied by vsys_cobra [ 2.078237] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.084633] LDO8: supplied by vsys_cobra [ 2.090354] LDO9: supplied by vmmcsd_fixed [ 2.096446] LDOLN: supplied by vsys_cobra [ 2.102280] LDOUSB: supplied by vsys_cobra [ 2.111192] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.135088] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.142770] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 1100000 KHz [ 2.150675] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 1500000 KHz [ 2.234331] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.954470] hub 1-2:1.0: USB hub found [ 3.055354] hub 1-2:1.0: 3 ports detected [ 3.159342] omap_i2c 48070000.i2c: controller timed out [ 4.194338] omap_i2c 48070000.i2c: controller timed out [ 4.209346] omap_hsmmc 4809c000.mmc: fail to disable boot enabled vmmc reg [ 5.234337] omap_i2c 48070000.i2c: controller timed out [ 6.269336] omap_i2c 48070000.i2c: controller timed out [ 7.304336] omap_i2c 48070000.i2c: controller timed out [ 8.339337] omap_i2c 48070000.i2c: controller timed out [ 8.354342] cpu cpu0: _set_opp_voltage: failed to set voltage (1060000 1060000 1060000 mV): -110 [ 9.379329] omap_i2c 48070000.i2c: controller timed out [ 10.414329] omap_i2c 48070000.i2c: controller timed out [ 11.449329] omap_i2c 48070000.i2c: controller timed out [ 12.484330] omap_i2c 48070000.i2c: controller timed out [ 12.499333] cpu cpu0: _set_opp_voltage: failed to set voltage (1250000 1250000 1250000 mV): -110 [ 12.508545] cpufreq: __target_index: Failed to change cpu frequency: -110
[PYBOOT] [omap5uevm 03:09]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 03:10]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 03:11]: Done. Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.538894] isl29018 7-0044: No cache defaults, reading back from HW [ 1.545246] isl29018 7-0044: Failed to read 1: -6 [ 1.549831] isl29018 7-0044: regmap initialization fails: -6 [ 1.560744] NET: Registered protocol family 10 [ 1.565175] sit: IPv6 over IPv4 tunneling driver [ 1.568751] NET: Registered protocol family 17 [ 1.572755] can: controller area network core (rev 20120528 abi 9) [ 1.578945] NET: Registered protocol family 29 [ 1.583333] can: raw protocol (rev 20120528) [ 1.587583] can: broadcast manager protocol (rev 20120528 t) [ 1.593225] can: netlink gateway (rev 20130117) max_hops=1 [ 1.598950] Key type dns_resolver registered [ 1.603280] ThumbEE CPU extension supported. [ 1.607194] Registering SWP/SWPB emulation handler [ 1.617111] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.622589] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.628956] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.634332] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.644429] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.654792] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.660240] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.670425] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.676607] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.681985] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.691709] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.714013] Waiting for root device /dev/mmcblk0p1... [ 1.717887] mmc0: tuning execution failed: -5 [ 1.721947] mmc0: error -5 whilst initialising MMC card [ 2.583682] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597818] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.603278] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609651] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.615036] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:50]: got exception: timeout ~$off
[PYBOOT] [pi 01:51]: Done. Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.539364] isl29018 7-0044: No cache defaults, reading back from HW [ 1.545716] isl29018 7-0044: Failed to read 1: -6 [ 1.550300] isl29018 7-0044: regmap initialization fails: -6 [ 1.561256] NET: Registered protocol family 10 [ 1.565690] sit: IPv6 over IPv4 tunneling driver [ 1.569266] NET: Registered protocol family 17 [ 1.573268] can: controller area network core (rev 20120528 abi 9) [ 1.579457] NET: Registered protocol family 29 [ 1.583845] can: raw protocol (rev 20120528) [ 1.588095] can: broadcast manager protocol (rev 20120528 t) [ 1.593737] can: netlink gateway (rev 20130117) max_hops=1 [ 1.599469] Key type dns_resolver registered [ 1.603794] ThumbEE CPU extension supported. [ 1.607706] Registering SWP/SWPB emulation handler [ 1.617666] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.623146] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.629512] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.634888] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.644987] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.655374] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.660821] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.671009] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.677188] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.682566] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.692276] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.714719] Waiting for root device /dev/mmcblk0p1... [ 1.718603] mmc0: tuning execution failed: -5 [ 1.722658] mmc0: error -5 whilst initialising MMC card [ 2.584137] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.598318] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.603775] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.610147] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.615532] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:59]: got exception: timeout ~$off
[PYBOOT] [pi 02:00]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.892070] Registering SWP/SWPB emulation handler [ 1.900821] VDDIO_HDMI: supplied by vdd_5v0 [ 1.906451] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.917773] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.924254] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.929697] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.938153] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.952636] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.959383] hub 3-0:1.0: USB hub found [ 1.963199] hub 3-0:1.0: 1 port detected [ 1.973583] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.980208] [drm] No driver support for vblank timestamp query. [ 1.991950] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.997597] mmc2: new MMC card at address 0001 [ 2.005485] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.013997] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.020581] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 2.025370] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 2.025538] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 2.027131] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 2.027993] mmcblk2: p3 [ 2.045736] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 2.049132] mmc0: new SDIO card at address 0001 [ 2.092016] Console: switching to colour frame buffer device 170x48 [ 2.141624] drm drm: fb0: frame buffer device [ 2.156606] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.163217] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 2.170191] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.183571] vdd_1v5: disabling [ 2.186647] vdd_1v2: disabling [ 2.764719] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.776110] Waiting for root device /dev/mmcblk0p3... [ 58.082447] random: nonblocking pool is initialized
[PYBOOT] [seaboard 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:52]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:54]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------
[ 4.555168] can: raw protocol (rev 20120528) [ 4.559445] can: broadcast manager protocol (rev 20120528 t) [ 4.565202] can: netlink gateway (rev 20130117) max_hops=1 [ 4.601086] Bluetooth: RFCOMM socket layer initialized [ 4.606252] Bluetooth: RFCOMM ver 1.11 [ 4.610017] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.615396] Bluetooth: BNEP socket layer initialized [ 4.620377] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.626334] Bluetooth: HIDP socket layer initialized [ 4.632025] Key type dns_resolver registered [ 4.637760] Registering SWP/SWPB emulation handler [ 4.653390] VDDIO_HDMI: supplied by vdd_5v0 [ 4.660360] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 4.672278] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 4.678752] tegra-ehci c5000000.usb: EHCI Host Controller [ 4.684345] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 4.692656] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 4.710225] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 4.719939] hub 3-0:1.0: USB hub found [ 4.723832] hub 3-0:1.0: 1 port detected [ 4.738308] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.744992] [drm] No driver support for vblank timestamp query. [ 4.841992] Console: switching to colour frame buffer device 170x48 [ 4.858322] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 4.888466] drm drm: fb0: frame buffer device [ 4.920206] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 4.927289] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 4.934828] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:01 UTC (1230768001) [ 4.953001] vdd_1v5: disabling [ 4.956052] vdd_1v2: disabling [ 4.959190] ALSA device list: [ 4.962175] #0: NVIDIA Tegra Seaboard [ 4.966626] Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:49]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:50]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:51]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.948547] usbcore: registered new interface driver usbhid [ 1.954162] usbhid: USB HID core driver [ 1.968505] NET: Registered protocol family 10 [ 1.974517] sit: IPv6 over IPv4 tunneling driver [ 1.980346] NET: Registered protocol family 17 [ 1.984832] can: controller area network core (rev 20120528 abi 9) [ 1.991149] NET: Registered protocol family 29 [ 1.995605] can: raw protocol (rev 20120528) [ 1.999908] can: broadcast manager protocol (rev 20120528 t) [ 2.005584] can: netlink gateway (rev 20130117) max_hops=1 [ 2.011932] Key type dns_resolver registered [ 2.016571] ThumbEE CPU extension supported. [ 2.020874] Registering SWP/SWPB emulation handler [ 2.033142] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.040344] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.049865] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.056945] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.063964] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.070983] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.088287] db8500-esram12: disabling [ 2.092102] db8500-esram34: disabling [ 2.095886] en-3v3-fixed-supply: disabling [ 2.101470] V-CSI/DSI: disabling [ 2.106842] mmci-reg: disabling [ 2.110778] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.116821] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.123443] Waiting for root device /dev/mmcblk0p4... [ 2.144653] mmc3: new MMC card at address 0001 [ 2.150054] mmcblk3: mmc3:0001 3.53 GiB [ 2.154449] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.160247] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.166046] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.174194] mmcblk3: p1 p2 p3 p4
[PYBOOT] [snowball 02:10]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:11]: got exception: timeout ~$off
[PYBOOT] [snowball 02:12]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.629547] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.643188] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.654022] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.664031] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.674774] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.698242] NET: Registered protocol family 10 [ 2.703552] sit: IPv6 over IPv4 tunneling driver [ 2.709045] NET: Registered protocol family 17 [ 2.713592] NET: Registered protocol family 35 [ 2.718078] NET: Registered protocol family 37 [ 2.722686] Registering SWP/SWPB emulation handler [ 2.729064] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.740417] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-23 03:00:32 UTC (956458832) [ 2.749572] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.756652] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.763671] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.770721] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.784301] db8500-esram12: disabling [ 2.788024] db8500-esram34: disabling [ 2.791839] en-3v3-fixed-supply: disabling [ 2.796142] V-CSI/DSI: disabling [ 2.799407] mmci-reg: disabling [ 2.802734] ALSA device list: [ 2.805694] #0: MOP500-card [ 2.808990] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.814971] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.821166] Waiting for root device /dev/mmcblk0p4... Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 01:53]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:54]: got exception: timeout ~$off
[PYBOOT] [snowball 01:56]: Done.
kernel-build-reports@lists.linaro.org
-
Olof's autobooter