Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.7-rc3-22-gabd3830/

Failed boards:

arndale multi_v7_nosmp_defconfig : NO BUILD bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver arm-tegra_defconfig : FAILED 1:48.82 beaver arm-multi_v7_defconfig : FAILED 1:49.08 beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:47.07 omap5uevm arm-omap2plus_defconfig : FAILED 2:07.31 omap5uevm arm-multi_v7_defconfig : FAILED 2:15.74 omap5uevm arm-multi_lpae_defconfig : FAILED 2:17.71 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-exynos_defconfig : FAILED 1:49.95 pi arm-multi_v7_defconfig : FAILED 1:58.44 pi arm-multi_lpae_defconfig : FAILED 2:07.03 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard multi_v7_nosmp_defconfig : NO BUILD

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:24.90 arndale arm-exynos_defconfig : passed 1:34.43 arndale arm-multi_v7_defconfig : passed 1:28.37 arndale arm-multi_lpae_defconfig : passed 1:18.49 bbb arm-omap2plus_defconfig : passed 1:43.97 bbb arm-multi_v7_defconfig : passed 1:15.01 beagleboard-x15 arm-omap2plus_defconfig : warnings 0:55.42 beagleboard-x15 arm-multi_v7_defconfig : warnings 0:56.02 beagleboard-x15 arm-multi_lpae_defconfig : warnings 1:03.21 capri arm-bcm_defconfig : passed 0:52.23 capri arm-multi_v7_defconfig : passed 1:08.11 chitra powerpc-pasemi_defconfig : passed 2:19.00 chitra powerpc-ppc64_defconfig : passed 2:02.61 colombus arm-sunxi_defconfig : passed 2:23.94 colombus arm-multi_v7_defconfig : passed 2:33.96 colombus arm-multi_lpae_defconfig : passed 2:27.24 cosmic arm-imx_v6_v7_defconfig : passed 3:20.83 cosmic arm-multi_v7_defconfig : passed 3:07.41 cubie arm-sunxi_defconfig : passed 0:54.21 cubie arm-multi_v7_defconfig : passed 0:53.51 cubie2 arm-sunxi_defconfig : passed 0:49.97 cubie2 arm-multi_v7_defconfig : passed 1:04.57 cubie2 arm-multi_lpae_defconfig : passed 0:57.14 cubox arm-multi_v7_defconfig : passed 1:15.02 cubox arm-mvebu_v7_defconfig : passed 1:20.52 dalmore arm-tegra_defconfig : warnings 2:27.98 dalmore arm-multi_v7_defconfig : warnings 1:25.48 dalmore arm-multi_lpae_defconfig : warnings 1:25.88 jetsontk1 arm-tegra_defconfig : warnings 0:53.71 jetsontk1 arm-multi_v7_defconfig : warnings 0:50.57 jetsontk1 arm-multi_lpae_defconfig : warnings 1:04.41 pandaes arm-omap2plus_defconfig : warnings 1:34.70 pandaes arm-multi_v7_defconfig : passed 1:41.40 parallella arm-multi_v7_defconfig : passed 2:56.83 pit arm-exynos_defconfig : passed 2:12.30 pit arm-multi_v7_defconfig : passed 2:28.06 pit arm-multi_lpae_defconfig : passed 2:16.20 seaboard arm-tegra_defconfig : warnings 1:07.43 seaboard arm-multi_v7_defconfig : warnings 0:59.87 seattle arm64-defconfig : passed 2:36.60 snow arm-exynos_defconfig : passed 2:08.03 snow arm-multi_v7_defconfig : passed 2:04.91 snow arm-multi_lpae_defconfig : passed 2:01.67 snowball arm-u8500_defconfig : passed 1:18.63 snowball arm-multi_v7_defconfig : passed 1:38.93 trimslice arm-tegra_defconfig : warnings 1:36.07 trimslice arm-multi_v7_defconfig : warnings 1:47.51 wandboard arm-imx_v6_v7_defconfig : passed 1:30.08 wandboard arm-multi_v7_defconfig : passed 1:10.61

Offline boards:

colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:18.97 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:23.29 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:21.96 hummingboard arm-multi_v7_defconfig : OFFLINE 2:12.13 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:52.24 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:41.77 sama5 arm-sama5_defconfig : OFFLINE 2:16.26 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:20.14 socfpga arm-socfpga_defconfig : OFFLINE 2:31.18 socfpga arm-multi_v7_defconfig : OFFLINE 2:12.93

Board legend is available at http://arm-soc.lixom.net/boards.html

Last entries of failed logs below:

========================================================================

Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 3.425075] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.431594] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.438547] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.444136] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.451130] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.461128] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.473004] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.479622] [drm] No driver support for vblank timestamp query. [ 3.485566] drm drm: No connectors reported connected with modes [ 3.491574] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.517943] Console: switching to colour frame buffer device 128x48 [ 3.529936] drm drm: fb0: frame buffer device [ 3.548702] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.559518] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.565982] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.571392] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.579241] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.593716] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.600783] hub 1-0:1.0: USB hub found [ 3.604556] hub 1-0:1.0: 1 port detected [ 3.609475] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.614886] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.622627] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.638705] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.645670] hub 2-0:1.0: USB hub found [ 3.649443] hub 2-0:1.0: 1 port detected [ 3.658069] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.671805] vdd_sata,avdd_plle: disabling [ 3.676533] usb1_vbus: disabling [ 3.680644] Waiting for root device /dev/mmcblk0p1... [ 3.958713] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.903743] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18 [ 76.868710] random: nonblocking pool is initialized

[PYBOOT] [beaver 01:46]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:47]: got exception: timeout ~$off

[PYBOOT] [beaver 01:48]: Done.

========================================================================

Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------

[ 6.444188] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 6.451236] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.456836] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 6.464343] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 6.474346] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 6.486948] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.493574] [drm] No driver support for vblank timestamp query. [ 6.499575] drm drm: No connectors reported connected with modes [ 6.505588] [drm] Cannot find any crtc or sizes - going 1024x768 [ 6.531377] Console: switching to colour frame buffer device 128x48 [ 6.543190] drm drm: fb0: frame buffer device [ 6.570775] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 6.580054] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 6.586531] tegra-ehci 7d004000.usb: EHCI Host Controller [ 6.591963] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 6.599929] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 6.620779] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 6.628379] hub 1-0:1.0: USB hub found [ 6.632159] hub 1-0:1.0: 1 port detected [ 6.636961] tegra-ehci 7d008000.usb: EHCI Host Controller [ 6.642385] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 6.650255] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 6.670776] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 6.678253] hub 2-0:1.0: USB hub found [ 6.682026] hub 2-0:1.0: 1 port detected [ 6.690737] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 6.708858] vdd_sata,avdd_plle: disabling [ 6.713658] usb1_vbus: disabling [ 6.717068] ALSA device list: [ 6.720024] #0: NVIDIA Tegra Beaver [ 6.724249] Waiting for root device /dev/mmcblk0p1... [ 7.000780] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 7.986154] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:46]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:47]: got exception: timeout ~$off

[PYBOOT] [beaver 01:48]: Done.

========================================================================

Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------

[ 1.791163] NET: Registered protocol family 10 [ 1.796781] sit: IPv6 over IPv4 tunneling driver [ 1.797253] NET: Registered protocol family 17 [ 1.800185] NET: Registered protocol family 15 [ 1.804664] Key type dns_resolver registered [ 1.809006] Registering SWP/SWPB emulation handler [ 1.822034] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.824338] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.831783] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.838912] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.845494] [drm] No driver support for vblank timestamp query. [ 1.851398] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.857746] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.862945] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.870390] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.878833] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.888638] mmc1: new DDR MMC card at address 0001 [ 1.892106] max98090 1-0010: MAX98090 REVID=0x43 [ 1.894380] max98090 1-0010: use default 2.8v micbias [ 1.906521] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.908689] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.908926] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.909165] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.909407] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.919529] mmcblk1: p1 p2 [ 1.937360] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.973873] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.994232] VDD10_HDMI_1.0V: disabling [ 1.994951] vdd_g3d: disabling [ 1.996017] BUCK8_2.8V: disabling [ 2.000049] ALSA device list: [ 2.001649] #0: Odroid-U3 [ 2.005456] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [odroidu3 01:44]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 01:45]: got exception: timeout ~$off

[PYBOOT] [odroidu3 01:46]: Done.

========================================================================

Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.906489] palmas 0-0048: Irq flag is 0x00000000 [ 1.926381] smsc95xx v1.0.4 [ 1.932305] palmas 0-0048: Muxing GPIO 2, PWM 0, LED 0 [ 1.943026] palmas-rtc 48070000.i2c:palmas@48:rtc: rtc core: registered 48070000.i2c:palmas as rtc0 [ 1.958516] smps6: Bringing 1350000uV into 1200000-1200000uV [ 1.968852] smps9: Bringing 0uV into 2100000-2100000uV [ 1.977399] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.983987] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.992061] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.002158] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 86:6c:24:5c:26:e7 [ 2.014740] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.022939] ldo9: bypassed regulator has no supply! [ 2.028051] ldo9: failed to get the current voltage(-517) [ 2.033715] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.048929] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.074287] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.080673] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.107219] smps9: Bringing 0uV into 2100000-2100000uV [ 2.125921] ldo9: bypassed regulator has no supply! [ 2.131039] ldo9: failed to get the current voltage(-517) [ 2.136701] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.151197] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:02:29 UTC (946684949) [ 2.167113] pbias_mmc_omap5: disabling [ 2.171072] vmmcsdio_fixed: disabling [ 2.175631] Waiting for root device /dev/mmcblk1p2... [ 2.243515] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.379339] hub 1-2:1.0: USB hub found [ 2.383354] hub 1-2:1.0: 3 ports detected [ 2.389108] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.417200] smps9: Bringing 0uV into 2100000-2100000uV [ 2.435979] ldo9: bypassed regulator has no supply! [ 2.441101] ldo9: failed to get the current voltage(-517) [ 2.446763] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator

[PYBOOT] [omap5uevm 02:15]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:16]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:17]: Done.

========================================================================

Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.978206] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.984745] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.992776] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.003878] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.012044] ldo9: bypassed regulator has no supply! [ 2.017160] ldo9: failed to get the current voltage(-517) [ 2.022828] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.037023] smsc95xx v1.0.4 [ 2.041060] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.064306] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.070706] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.098141] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, be:07:ca:07:fe:37 [ 2.110001] smps9: Bringing 0uV into 2100000-2100000uV [ 2.128969] ldo9: bypassed regulator has no supply! [ 2.134088] ldo9: failed to get the current voltage(-517) [ 2.139753] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.153874] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.182412] smps9: Bringing 0uV into 2100000-2100000uV [ 2.201243] ldo9: bypassed regulator has no supply! [ 2.206359] ldo9: failed to get the current voltage(-517) [ 2.212021] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.226514] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.242425] pbias_mmc_omap5: disabling [ 2.246382] vmmcsdio_fixed: disabling [ 2.250922] Waiting for root device /dev/mmcblk1p2... [ 2.363555] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.499441] hub 1-2:1.0: USB hub found [ 2.503456] hub 1-2:1.0: 3 ports detected [ 2.509377] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.542510] smps9: Bringing 0uV into 2100000-2100000uV [ 2.561482] ldo9: bypassed regulator has no supply! [ 2.566602] ldo9: failed to get the current voltage(-517) [ 2.572272] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator

[PYBOOT] [omap5uevm 02:11]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:12]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:14]: Done.

========================================================================

Board omap5uevm-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 3.996936] ldo9: bypassed regulator has no supply! [ 4.002068] ldo9: failed to get the current voltage(-517) [ 4.007733] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.030631] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 4.038173] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 4.044751] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 4.051069] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.057919] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.067508] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.077021] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.084079] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 4.090213] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.096523] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.103383] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.112973] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.122472] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.129508] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.149954] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 4.156242] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 4.163101] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 4.172699] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 4.182183] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 4.189223] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 4.209667] smps9: Bringing 0uV into 2100000-2100000uV [ 4.238080] ldo9: bypassed regulator has no supply! [ 4.243210] ldo9: failed to get the current voltage(-517) [ 4.248875] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.268962] hctosys: unable to open rtc device (rtc0) [ 4.274278] sr_init: No PMIC hook to init smartreflex [ 4.279777] sr_init: platform driver register failed for SR [ 4.307393] pbias_mmc_omap5: disabling [ 4.311353] vmmcsdio_fixed: disabling [ 4.317523] Waiting for root device /dev/mmcblk1p2...

[PYBOOT] [omap5uevm 02:04]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:05]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:06]: Done.

========================================================================

Board pi-arm-exynos_defconfig failure log: -------------------------------------------------

[ 20.943552] BUG: spinlock lockup suspected on CPU#0, kworker/u16:1/80 [ 20.948508] lock: 0xee73f000, .magic: dead4ead, .owner: kworker/u16:1/80, .owner_cpu: 0 [ 20.956574] CPU: 0 PID: 80 Comm: kworker/u16:1 Tainted: G D 4.7.0-rc3-00022-gabd3830 #1 [ 20.965682] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 20.971765] [<c010dfec>] (unwind_backtrace) from [<c010ad18>] (show_stack+0x10/0x14) [ 20.979479] [<c010ad18>] (show_stack) from [<c0326ab8>] (dump_stack+0x78/0x8c) [ 20.986681] [<c0326ab8>] (dump_stack) from [<c015994c>] (do_raw_spin_lock+0xfc/0x1d8) [ 20.994487] [<c015994c>] (do_raw_spin_lock) from [<c06d2468>] (__schedule+0x84/0x4b8) [ 21.002294] [<c06d2468>] (__schedule) from [<c06d28e8>] (schedule+0x4c/0xac) [ 21.009320] [<c06d28e8>] (schedule) from [<c011e500>] (do_exit+0x870/0xa34) [ 21.016260] [<c011e500>] (do_exit) from [<c010af54>] (die+0x238/0x2f4) [ 21.022769] [<c010af54>] (die) from [<c0114e84>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 21.030663] [<c0114e84>] (__do_kernel_fault.part.0) from [<c0110894>] (do_bad_area+0x0/0x8c) [ 21.039076] [<c0110894>] (do_bad_area) from [<c01105fc>] (do_page_fault+0x0/0x298) [ 21.046622] [<c01105fc>] (do_page_fault) from [<00000000>] ( (null)) [ 21.053040] Sending NMI to all CPUs: [ 21.056596] NMI backtrace for cpu 0 [ 21.060067] CPU: 0 PID: 80 Comm: kworker/u16:1 Tainted: G D 4.7.0-rc3-00022-gabd3830 #1 [ 21.069174] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 21.075254] [<c010dfec>] (unwind_backtrace) from [<c010ad18>] (show_stack+0x10/0x14) [ 21.082971] [<c010ad18>] (show_stack) from [<c0326ab8>] (dump_stack+0x78/0x8c) [ 21.090172] [<c0326ab8>] (dump_stack) from [<c032a418>] (nmi_cpu_backtrace+0x78/0x7c) [ 21.097978] [<c032a418>] (nmi_cpu_backtrace) from [<c010c934>] (raise_nmi+0x60/0x64) [ 21.105699] [<c010c934>] (raise_nmi) from [<c032a398>] (nmi_trigger_all_cpu_backtrace+0x128/0x130) [ 21.114634] [<c032a398>] (nmi_trigger_all_cpu_backtrace) from [<c0159954>] (do_raw_spin_lock+0x104/0x1d8) [ 21.124177] [<c0159954>] (do_raw_spin_lock) from [<c06d2468>] (__schedule+0x84/0x4b8) [ 21.131985] [<c06d2468>] (__schedule) from [<c06d28e8>] (schedule+0x4c/0xac) [ 21.139011] [<c06d28e8>] (schedule) from [<c011e500>] (do_exit+0x870/0xa34) [ 21.145951] [<c011e500>] (do_exit) from [<c010af54>] (die+0x238/0x2f4) [ 21.152458] [<c010af54>] (die) from [<c0114e84>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 21.160352] [<c0114e84>] (__do_kernel_fault.part.0) from [<c0110894>] (do_bad_area+0x0/0x8c) [ 21.168766] [<c0110894>] (do_bad_area) from [<c01105fc>] (do_page_fault+0x0/0x298) [ 21.176313] [<c01105fc>] (do_page_fault) from [<00000000>] ( (null))

[PYBOOT] [pi 01:47]: Timed out waiting for "<type 'str'>":

[PYBOOT] [pi 01:48]: got exception: timeout ~$off

[PYBOOT] [pi 01:49]: Done.

========================================================================

Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.533408] isl29018 7-0044: No cache defaults, reading back from HW [ 1.539762] isl29018 7-0044: Failed to read 1: -6 [ 1.544345] isl29018 7-0044: regmap initialization fails: -6 [ 1.555247] NET: Registered protocol family 10 [ 1.559677] sit: IPv6 over IPv4 tunneling driver [ 1.563254] NET: Registered protocol family 17 [ 1.567261] can: controller area network core (rev 20120528 abi 9) [ 1.573452] NET: Registered protocol family 29 [ 1.577840] can: raw protocol (rev 20120528) [ 1.582089] can: broadcast manager protocol (rev 20120528 t) [ 1.587731] can: netlink gateway (rev 20130117) max_hops=1 [ 1.593454] Key type dns_resolver registered [ 1.597781] ThumbEE CPU extension supported. [ 1.601700] Registering SWP/SWPB emulation handler [ 1.611545] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.617026] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.623394] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.628767] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.638869] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.649163] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.654607] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.664795] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.670974] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.676352] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.686074] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708641] Waiting for root device /dev/mmcblk0p1... [ 1.712526] mmc0: tuning execution failed: -5 [ 1.716582] mmc0: error -5 whilst initialising MMC card [ 2.583213] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597360] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.602817] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609189] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614573] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo

[PYBOOT] [pi 02:04]: Timed out waiting for "<type 'str'>":

[PYBOOT] [pi 02:05]: got exception: timeout ~$off

[PYBOOT] [pi 02:06]: Done.

========================================================================

Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.538908] isl29018 7-0044: No cache defaults, reading back from HW [ 1.545261] isl29018 7-0044: Failed to read 1: -6 [ 1.549846] isl29018 7-0044: regmap initialization fails: -6 [ 1.560780] NET: Registered protocol family 10 [ 1.565218] sit: IPv6 over IPv4 tunneling driver [ 1.568793] NET: Registered protocol family 17 [ 1.572797] can: controller area network core (rev 20120528 abi 9) [ 1.578989] NET: Registered protocol family 29 [ 1.583375] can: raw protocol (rev 20120528) [ 1.587624] can: broadcast manager protocol (rev 20120528 t) [ 1.593267] can: netlink gateway (rev 20130117) max_hops=1 [ 1.598989] Key type dns_resolver registered [ 1.603318] ThumbEE CPU extension supported. [ 1.607235] Registering SWP/SWPB emulation handler [ 1.617135] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.622616] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.628980] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.634355] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.644460] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.654825] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.660274] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.670458] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.676639] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.682018] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.691742] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.714414] Waiting for root device /dev/mmcblk0p1... [ 1.718299] mmc0: tuning execution failed: -5 [ 1.722352] mmc0: error -5 whilst initialising MMC card [ 2.583699] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597876] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.603340] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609710] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.615094] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo

[PYBOOT] [pi 01:55]: Timed out waiting for "<type 'str'>":

[PYBOOT] [pi 01:56]: got exception: timeout ~$off

[PYBOOT] [pi 01:57]: Done.