queue boot: 6 passed 9 failed (queue/v3.10.21-24-g644ed47) - Kernel-build-reports

30 Nov 2013


      arndale             :	passed	0:48.64
    bbb                 :	FAILED	1:14.25
    beaver              :	passed	0:34.17
    multi-beaver        :	FAILED	0:49.77
    cubie               :	FAILED	0:12.77
    cubie2              :	FAILED	0:53.66
    cubox               :	passed	0:51.78
    panda               :	passed	2:51.20
    multi-panda         :	FAILED	0:47.12
    sama5               :	passed	1:36.46
    snowball            :	passed	0:50.18
    multi-snowball      :	FAILED	0:43.57
    multi-trimslice     :	FAILED	0:38.92
    wandboard           :	FAILED	0:43.64
    multi-wandboard     :	FAILED	0:41.14
Board legend:
Board               :	System                 SoC                  Defconfig
arndale             :	InSignal ArndaleBoard     Samsung Exynos 5250  exynos_defconfig
    bbb                 :	BeagleBone Black          TI Sitara AM3359     omap2plus_defconfig
    beaver              :	Nvidia Beaver             Nvidia Tegra 30      tegra_defconfig
    multi-beaver        :	                                               multi_v7_defconfig
    cubie               :	Cubieboard                Allwinner A10        multi_v7_defconfig
    cubie2              :	Cubieboard 2              Allwinner A20        multi_v7_defconfig
    cubox               :	SolidRun Cubox            Marvell 88AP510      dove_defconfig
    multi-trimslice     :	CompuLab TrimSlice        Nvidia Tegra 20      multi_v7_defconfig
    panda               :	TI PandaBoard ES          TI OMAP4460          omap2plus_defconfig
    multi-panda         :	                                               multi_v7_defconfig
    sama5               :	Atmel SAMA5 devboard      Atmel SAMA5D35       sama5_defconfig
    snowball            :	CALAO Snowball            ST-Ericsson A9500    u8500_defconfig
    multi-snowball      :	                                               multi_v7_defconfig
    wandboard           :	Wandboard                 Freescale i.MX6 Quad imx_v6_v7_defconfig
    multi-wandboard     :	                                               multi_v7_defconfig
Last entries of failed logs below:
========================================================================
Board bbb failure log:
    -------------------------------------------------
Environment size: 4203/131068 bytes
U-Boot# setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp'
setenv bootargs 'console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp'
U-Boot# printenv bootargs
printenv bootargs
bootargs=console=ttyO0,115200 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/bbb ip=dhcp
U-Boot# tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/uImage.omap
tftpboot 0x80000000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/uImage.omap
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 172.16.1.4; our IP address is 172.16.1.110
Filename '/srv/tftp/queue/v3.10.21-24-g644ed47/uImage.omap'.
Load address: 0x80000000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     ######
     625 KiB/s
done
Bytes transferred = 4019968 (3d5700 hex)
U-Boot# tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/am335x-boneblack.dtb
tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/am335x-boneblack.dtb
link up on port 0, speed 100, full duplex
Using cpsw device
TFTP from server 172.16.1.4; our IP address is 172.16.1.110
Filename '/srv/tftp/queue/v3.10.21-24-g644ed47/am335x-boneblack.dtb'.
Load address: 0x81000000
Loading: *
TFTP error: 'File not found' (1)
Not retrying...
U-Boot# ~$off
========================================================================
Board cubie failure log:
    -------------------------------------------------
io scheduler deadline registered
io scheduler cfq registered (default)
sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: Adding default-specified kcs state machine
ipmi_si: Trying default-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si: Could not set up I/O space
Trying to free nonexistent resource <0000000000000ca2-0000000000000ca2>
Trying to free nonexistent resource <0000000000000ca3-0000000000000ca3>
ipmi_si: Adding default-specified smic state machine
ipmi_si: Trying default-specified smic state machine at i/o address 0xca9, slave address 0x0, irq 0
ipmi_si: Could not set up I/O space
Trying to free nonexistent resource <0000000000000ca9-0000000000000ca9>
Trying to free nonexistent resource <0000000000000caa-0000000000000caa>
Trying to free nonexistent resource <0000000000000cab-0000000000000cab>
ipmi_si: Adding default-specified bt state machine
ipmi_si: Trying default-specified bt state machine at i/o address 0xe4, slave address 0x0, irq 0
ipmi_si: Could not set up I/O space
Trying to free nonexistent resource <00000000000000e4-00000000000000e4>
Trying to free nonexistent resource <00000000000000e5-00000000000000e5>
Trying to free nonexistent resource <00000000000000e6-00000000000000e6>
ipmi_si: Unable to find any System Interface(s)
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 17) is a U6_16550A
console [ttynode: cubie           status: on
S0] enabled
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
Registering SWP/SWPB emulation handler
/home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
List of all partitions:
No filesystem could mount root, tried: 
Kernel panic - not s~$off
========================================================================
Board cubie2 failure log:
    -------------------------------------------------
netmask=255.255.255.0
panicarg=panic=10
partition=0:1
scriptaddr=0x44000000
serverip=172.16.1.4
setargs=if test -z \"$root\"; then if test \"$bootpath\" = "boot/"; then root="/dev/mmcblk0p1 rootwait"; else root="/dev/mmcblk0p2 rootwait"; fi; fi; setenv bootargs console=${console} root=${root} loglevel=${loglevel} ${panicarg} ${extraargs}
stderr=serial
stdin=serial
stdout=serial
Environment size: 2099/131068 bytes
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp
sun7i# tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/uImage.multi-1g
tftpboot 0x41000000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/uImage.multi-1g
Using emac device
TFTP from server 172.16.1.4; our IP address is 172.16.1.156
Filename '/srv/tftp/queue/v3.10.21-24-g644ed47/uImage.multi-1g'.
Load address: 0x41000000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     ###############################
     2.7 MiB/s
done
Bytes transferred = 1820736 (1bc840 hex)
sun7i# tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/sun7i-a20-cubieboard2.dtb
tftpboot 0x42000000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/sun7i-a20-cubieboard2.dtb
Using emac device
TFTP from server 172.16.1.4; our IP address is 172.16.1.156
Filename '/srv/tftp/queue/v3.10.21-24-g644ed47/sun7i-a20-cubieboard2.dtb'.
Load address: 0x42000000
Loading: *
TFTP error: 'File not found' (1)
Not retrying...
sun7i# node: cubie2          status: on
~$off
========================================================================
Board multi-beaver failure log:
    -------------------------------------------------
Using asx0 device
TFTP from server 172.16.1.4; our IP address is 172.16.1.177
Filename '/srv/tftp/queue/v3.10.21-24-g644ed47/uImage.multi-2g'.
Load address: 0x82000000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     ###############################
     1.9 MiB/s
done
Bytes transferred = 1820736 (1bc840 hex)
Tegra30 (Beaver) # tftpboot 0x83000000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/tegra30-beaver.dtb
tftpboot 0x83000000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/tegra30-beaver.dtb
Using asx0 device
TFTP from server 172.16.1.4; our IP address is 172.16.1.177
Filename '/srv/tftp/queue/v3.10.21-24-g644ed47/tegra30-beaver.dtb'.
Load address: 0x83000000
Loading: *####
     1.4 MiB/s
done
Bytes transferred = 16546 (40a2 hex)
Tegra30 (Beaver) # bootm 0x82000000 - 0x83000000
bootm 0x82000000 - 0x83000000
## Booting kernel from Legacy Image at 82000000 ...
   Image Name:   
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1820672 Bytes = 1.7 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 83000000
   Booting using the fdt blob at 0x83000000
   Loading Kernel Image ... OK
   Loading Device Tree to 8fff8000, end 8ffff0a1 ... OK
Starting kernel ...
~$off
========================================================================
Board multi-panda failure log:
    -------------------------------------------------
TFTP from server 172.16.1.4; our IP address is 172.16.1.182
Filename '/srv/tftp/queue/v3.10.21-24-g644ed47/uImage.multi-2g'.
Load address: 0x80000000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     ###############################
done
Bytes transferred = 1820736 (1bc840 hex)
Panda # tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/omap4-panda-es.dtb
tftpboot 0x81000000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/omap4-panda-es.dtb
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 172.16.1.4; our IP address is 172.16.1.182
Filename '/srv/tftp/queue/v3.10.21-24-g644ed47/omap4-panda-es.dtb'.
Load address: 0x81000000
Loading: *####
done
Bytes transferred = 17271 (4377 hex)
Panda # bootm 0x80000000 - 0x81000000
bootm 0x80000000 - 0x81000000
## Booting kernel from Legacy Image at 80000000 ...
   Image Name:   
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1820672 Bytes = 1.7 MiB
   Load Address: 80008000
   Entry Point:  80008000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 81000000
   Booting using the fdt blob at 0x81000000
   Loading Kernel Image ... OK
OK
   reserving fdt memory region: addr=9d000000 size=3000000
   Using Device Tree in place at 81000000, end 81007376
Starting kernel ...
~$off
========================================================================
Board multi-snowball failure log:
    -------------------------------------------------
ipaddr=172.16.1.124
serverip=172.16.1.7
bootfile=queue/v3.10.21-24-g644ed47/uImage.multi-snowball
autoboot=no
Environment size: 1706/4092 bytes
U8500 $ printenv bootargs
printenv bootargs
bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk
U8500 $ tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/uImage.multi-snowball
tftpboot 0x100000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/uImage.multi-snowball
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 08:00:08:1e:0f:44
Using smc911x-0 device
TFTP from server 172.16.1.4; our IP address is 172.16.1.124
Filename '/srv/tftp/queue/v3.10.21-24-g644ed47/uImage.multi-snowball'.
Load address: 0x100000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     ###############################
done
Bytes transferred = 1820736 (1bc840 hex)
U8500 $ bootm 0x100000
bootm 0x100000
## Booting kernel from Legacy Image at 00100000 ...
   Image Name:   
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    1820672 Bytes =  1.7 MB
   Load Address: 00008000
   Entry Point:  00008000
   Loading Kernel Image ... OK
OK
Starting kernel ...
~$off
========================================================================
Board multi-trimslice failure log:
    -------------------------------------------------
*** Unhandled DHCP Option in OFFER/ACK: 28
DHCP client bound to address 172.16.1.137
TrimSlice # setenv bootfile queue/v3.10.21-24-g644ed47/uImage.multi-trimslice
setenv bootfile queue/v3.10.21-24-g644ed47/uImage.multi-trimslice
TrimSlice # setenv autoboot no
setenv autoboot no
TrimSlice # printenv
printenv
bootdelay=5
baudrate=115200
loadaddr=0x408000
stdin=serial,usbkbd
stdout=serial,lcd
stderr=serial,lcd
console=ttyS0,115200n8
ethact=RTL8169#0
gateway=172.16.1.1
bootcmd=none
bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw
autoload=no
netmask=255.255.255.0
ipaddr=172.16.1.137
serverip=172.16.1.7
bootfile=queue/v3.10.21-24-g644ed47/uImage.multi-trimslice
autoboot=no
Environment size: 376/65532 bytes
TrimSlice # printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw
TrimSlice # tftpboot 0x800000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/uImage.multi-trimslice
tftpboot 0x800000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/uImage.multi-trimslice
Using RTL8169#0 device
TFTP from server 172.16.1.4; our IP address is 172.16.1.137
Filename '/srv/tftp/queue/v3.10.21-24-g644ed47/uImage.multi-trimslice'.
Load address: 0x800000
Loading: *
TFTP error: 'File not found' (1)
Not retrying...
TrimSlice # ~$off
========================================================================
Board multi-wandboard failure log:
    -------------------------------------------------
mmcroot=/dev/mmcblk0p2 ro
mmcrootfstype=ext4 rootwait
netargs=setenv bootargs console=${console},${baudrate} root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp
netboot=echo Booting from net ...; run netargs; if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; ${get_cmd} zImage; if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if ${get_cmd} ${fdt_addr} ${fdt_file}; then bootz ${loadaddr} - ${fdt_addr}; else if test ${boot_fdt} = try; then bootz ${loadaddr}; else echo WARN: Cannot load the DT; fi; fi; else bootz ${loadaddr}; fi;
netmask=255.255.255.0
script=boot.scr
serverip=172.16.1.7
uimage=uImage
update_sd_firmware=if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; if mmc dev ${mmcdev}; then if ${get_cmd} ${update_sd_firmware_filename}; then setexpr fw_sz ${filesize} / 0x200; setexpr fw_sz ${fw_sz} + 1; mmc write ${loadaddr} 0x2 ${fw_sz}; fi; fi
update_sd_firmware_filename=u-boot.imx
Environment size: 2719/8188 bytes
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug
=> tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/uImage.multi-256m
tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/uImage.multi-256m
Using FEC device
TFTP from server 172.16.1.4; our IP address is 172.16.1.157
Filename '/srv/tftp/queue/v3.10.21-24-g644ed47/uImage.multi-256m'.
Load address: 0x12000000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     ###############################
     3.6 MiB/s
done
Bytes transferred = 1820736 (1bc840 hex)
=> tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/imx6q-wandboard.dtb
tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/imx6q-wandboard.dtb
Using FEC device
TFTP from server 172.16.1.4; our IP address is 172.16.1.157
Filename '/srv/tftp/queue/v3.10.21-24-g644ed47/imx6q-wandboard.dtb'.
Load address: 0x14000000
Loading: *
TFTP error: 'File not found' (1)
Not retrying...
=> ~$off
========================================================================
Board wandboard failure log:
    -------------------------------------------------
update_sd_firmware=if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; if mmc dev ${mmcdev}; then if ${get_cmd} ${update_sd_firmware_filename}; then setexpr fw_sz ${filesize} / 0x200; setexpr fw_sz ${fw_sz} + 1; mmc write ${loadaddr} 0x2 ${fw_sz}; fi; fi
update_sd_firmware_filename=u-boot.imx
Environment size: 2712/8188 bytes
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug
=> tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/uImage.imx
tftpboot 0x12000000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/uImage.imx
Using FEC device
TFTP from server 172.16.1.4; our IP address is 172.16.1.157
Filename '/srv/tftp/queue/v3.10.21-24-g644ed47/uImage.imx'.
Load address: 0x12000000
Loading: *#################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     #################################################################
     ##########################################
     3.7 MiB/s
done
Bytes transferred = 4205000 (4029c8 hex)
=> tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/imx6q-wandboard.dtb
tftpboot 0x14000000 172.16.1.4:/srv/tftp/queue/v3.10.21-24-g644ed47/imx6q-wandboard.dtb
Using FEC device
TFTP from server 172.16.1.4; our IP address is 172.16.1.157
Filename '/srv/tftp/queue/v3.10.21-24-g644ed47/imx6q-wandboard.dtb'.
Load address: 0x14000000
Loading: *
TFTP error: 'File not found' (1)
Not retrying...
=> node: wandboard       status: on
~$off