Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-rc6-85-g1248ded/

Failed boards:

arndale arm-multi_v7_nosmp_defconfig : FAILED 2:37.97 bbb arm-omap2plus_defconfig : FAILED 1:55.53 bbb arm-multi_v7_defconfig : FAILED 1:54.72 bbb arm-multi_v7_nosmp_defconfig : FAILED 2:09.86 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:45.44 beagleboard-x15 arm-multi_v7_defconfig : FAILED 2:14.74 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:50.70 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 1:49.88 chitra powerpc-pasemi_defconfig : BUILD FAILED colombus arm-multi_v7_nosmp_defconfig : FAILED 3:20.17 cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.24 cosmic arm-multi_v7_defconfig : FAILED 2:03.53 cosmic arm-multi_v7_nosmp_defconfig : FAILED 1:59.54 dalmore arm-tegra_defconfig : FAILED 1:49.02 dalmore arm-multi_v7_defconfig : FAILED 1:59.04 dalmore arm-multi_lpae_defconfig : FAILED 2:49.86 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:52.28 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:50.15 omap5uevm arm-multi_v7_defconfig : FAILED 0:51.85 omap5uevm arm-multi_lpae_defconfig : FAILED 0:52.63 omap5uevm arm-multi_v7_nosmp_defconfig : FAILED 0:50.72 seaboard arm-tegra_defconfig : FAILED 1:52.79 seaboard arm-multi_v7_defconfig : FAILED 1:58.46 seaboard arm-multi_v7_nosmp_defconfig : FAILED 1:52.90 snow arm-multi_v7_nosmp_defconfig : FAILED 3:13.74 snowball arm-u8500_defconfig : FAILED 1:56.94 snowball arm-multi_v7_defconfig : FAILED 2:10.82 snowball arm-multi_v7_nosmp_defconfig : FAILED 2:04.26 wandboard arm-imx_v6_v7_defconfig : FAILED 2:58.04

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:10.02 arndale arm-exynos_defconfig : passed 1:28.16 arndale arm-multi_v7_defconfig : passed 1:17.28 arndale arm-multi_lpae_defconfig : passed 1:26.31 capri arm-bcm_defconfig : passed 0:45.98 capri arm-multi_v7_defconfig : passed 0:57.81 capri arm-multi_v7_nosmp_defconfig : warnings 0:54.82 chitra powerpc-ppc64_defconfig : passed 2:17.13 colombus arm-sunxi_defconfig : passed 2:32.99 colombus arm-multi_v7_defconfig : passed 2:40.94 colombus arm-multi_lpae_defconfig : passed 2:31.18 cubie arm-sunxi_defconfig : passed 0:50.93 cubie arm-multi_v7_defconfig : passed 0:54.40 cubie arm-multi_v7_nosmp_defconfig : passed 0:54.11 cubie2 arm-sunxi_defconfig : passed 0:49.90 cubie2 arm-multi_v7_defconfig : passed 0:50.76 cubie2 arm-multi_lpae_defconfig : passed 0:56.22 cubie2 arm-multi_v7_nosmp_defconfig : warnings 0:58.72 cubox arm-multi_v7_defconfig : passed 1:05.78 cubox arm-mvebu_v7_defconfig : passed 1:09.46 cubox arm-multi_v7_nosmp_defconfig : passed 1:06.23 hummingboard arm-imx_v6_v7_defconfig : passed 1:30.55 hummingboard arm-multi_v7_defconfig : passed 1:40.95 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:11.31 jetsontk1 arm-tegra_defconfig : passed 2:05.87 jetsontk1 arm-multi_v7_defconfig : passed 1:40.14 jetsontk1 arm-multi_lpae_defconfig : passed 1:39.31 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:39.60 omap5uevm arm-omap2plus_defconfig : passed 1:04.19 pandaes arm-omap2plus_defconfig : warnings 1:44.20 pandaes arm-multi_v7_defconfig : passed 1:42.48 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:57.50 pi arm-exynos_defconfig : passed 2:13.37 pi arm-multi_v7_defconfig : passed 2:26.81 pi arm-multi_lpae_defconfig : passed 2:30.88 pi arm-multi_v7_nosmp_defconfig : warnings 2:10.42 pit arm-exynos_defconfig : passed 2:12.53 pit arm-multi_v7_defconfig : passed 2:12.81 pit arm-multi_lpae_defconfig : passed 2:28.80 pit arm-multi_v7_nosmp_defconfig : warnings 2:11.69 seattle arm64-defconfig : warnings 2:28.91 snow arm-exynos_defconfig : passed 2:09.77 snow arm-multi_v7_defconfig : passed 2:02.49 snow arm-multi_lpae_defconfig : passed 1:58.67 trimslice arm-tegra_defconfig : passed 2:37.44 trimslice arm-multi_v7_defconfig : passed 1:53.32 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:35.90 wandboard arm-multi_v7_defconfig : passed 1:15.63 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:07.90

Offline boards:

beaver arm-tegra_defconfig : OFFLINE 2:12.64 beaver arm-multi_v7_defconfig : OFFLINE 2:20.48 beaver arm-multi_v7_nosmp_defconfig : OFFLINE 2:13.18 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:15.49 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:16.66 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 1:30.49 parallella arm-multi_v7_defconfig : OFFLINE 2:32.69 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:13.20 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:49.10 rk3288evb arm-multi_lpae_defconfig : OFFLINE 1:01.31 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:48.22 sama5 arm-sama5_defconfig : OFFLINE 2:17.92 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:32.79 socfpga arm-socfpga_defconfig : OFFLINE 2:23.78 socfpga arm-multi_v7_defconfig : OFFLINE 2:27.91 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:13.25

Board legend is available at http://arm-soc.lixom.net/boards.html

Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 2.033077] ahci 122f0000.sata: couldn't get PHY in node sata: -517 [ 2.028065] MAIN_DC: disabli [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.6.0-rc6-00085-g1248ded (build@brutus) (gcc version 6.1.0 (GCC) ) #1 Tue May 3 11:16:57 PDT 2016 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 2.070610] [c10b5928] *pgd=4100041e(bad) [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Insignal Arndale evaluation board based on EXYNOS5250 [ 2.088925] Modules linked in: [ 0.000000] cma: Reserved 64 MiB at 0xbc000000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Samsung CPU ID: 0x43520010 [ 0.000000] On node 0 totalpages: 520192 [ 0.000000] free_area_init_node: node 0, pgdat c10fd334, node_mem_map eeff7000 [ 0.000000] DMA zone: 1536 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 192512 pages, LIFO batch:31 [ 0.000000] HighMem zone: 327680 pages, LIFO batch:31 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at /home/build/work/batch/arch/arm/kernel/devtree.c:149 arm_dt_init_cpu_maps+0xf8/0x134 [ 0.000000] DT /cpu 2 nodes greater than max cores 1, capping them [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.6.0-rc6-00085-g1248ded #1 [ 0.000000] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 0.000000] [<c030e70c>] (unwind_backtrace) from [<c030b298>] (show_stack+0x10/0x14) [ 0.000000] [<c030b298>] (show_stack) from [<c0335fb8>] (__warn+0xe4/0xfc) [ 0.000000] [<c0335fb8>] (__warn) from [<c0336008>] (warn_slowpath_fmt+0x38/0x48) [ 0.000000] [<c0336008>] (warn_slowpath_fmt) from [<c0f04040>] (arm_dt_init_cpu_maps+0xf8/0x134) [ 0.000000] [<c0f04040>] (arm_dt_init_cpu_maps) from [<c0f03368>] (setup_arch+0x780/0x8b8) [ 0.000000] [<c0f03368>] (setup_arch) from [<c0f00940>] (start_kernel+0x68/0x370) [ 0.000000] [<c0f00940>] (start_kernel) from [<40208078>] (0x40208078) [ 0.000000] ---[ end trace cb88537fdc8fa200 ]---

[PYBOOT] [arndale 02:35]: Timed out waiting for "<type 'str'>":

[PYBOOT] [arndale 02:36]: got exception: timeout ~$off

[PYBOOT] [arndale 02:37]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.631183] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.641449] ledtrig-cpu: registered to indicate activity on CPUs [ 1.648527] usbcore: registered new interface driver usbhid [ 1.654455] usbhid: USB HID core driver [ 1.666467] NET: Registered protocol family 10 [ 1.673057] sit: IPv6 over IPv4 tunneling driver [ 1.679193] NET: Registered protocol family 17 [ 1.683961] can: controller area network core (rev 20120528 abi 9) [ 1.690603] NET: Registered protocol family 29 [ 1.695322] can: raw protocol (rev 20120528) [ 1.699843] can: broadcast manager protocol (rev 20120528 t) [ 1.705836] can: netlink gateway (rev 20130117) max_hops=1 [ 1.712594] Key type dns_resolver registered [ 1.717503] omap_voltage_late_init: Voltage driver support not added [ 1.725785] ThumbEE CPU extension supported. [ 1.730416] Registering SWP/SWPB emulation handler [ 1.772748] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.779287] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.787053] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.795769] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.803679] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.811508] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.819316] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.826670] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.835350] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.843284] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.853016] mmc1: new high speed MMC card at address 0001 [ 1.860259] hctosys: unable to open rtc device (rtc0) [ 1.873233] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.879256] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.886236] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.895074] mmcblk1: p1 p2 [ 1.900782] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:52]: got exception: timeout ~$off

[PYBOOT] [bbb 01:53]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.317603] sdhci: Secure Digital Host Controller Interface driver [ 1.324128] sdhci: Copyright(c) Pierre Ossman [ 1.329935] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.393005] Synopsys Designware Multimedia Card Interface Driver [ 1.400374] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.409558] ledtrig-cpu: registered to indicate activity on CPUs [ 1.416309] usbcore: registered new interface driver usbhid [ 1.422188] usbhid: USB HID core driver [ 1.431769] NET: Registered protocol family 10 [ 1.438249] sit: IPv6 over IPv4 tunneling driver [ 1.444116] NET: Registered protocol family 17 [ 1.448853] can: controller area network core (rev 20120528 abi 9) [ 1.455448] NET: Registered protocol family 29 [ 1.460142] can: raw protocol (rev 20120528) [ 1.464653] can: broadcast manager protocol (rev 20120528 t) [ 1.470628] can: netlink gateway (rev 20130117) max_hops=1 [ 1.477140] Key type dns_resolver registered [ 1.482012] omap_voltage_late_init: Voltage driver support not added [ 1.489818] ThumbEE CPU extension supported. [ 1.502400] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.509964] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.518020] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.525752] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.533442] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.541119] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.548401] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.556077] hctosys: unable to open rtc device (rtc0) [ 1.566808] Waiting for root device /dev/mmcblk0p2... [ 1.602263] mmc1: new high speed MMC card at address 0001 [ 1.608724] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.613794] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.620275] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.628709] mmcblk1: p1 p2

[PYBOOT] [bbb 02:07]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 02:08]: got exception: timeout ~$off

[PYBOOT] [bbb 02:09]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.048615] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.054751] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.061098] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.067994] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.077619] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.087145] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.094183] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.137360] ledtrig-cpu: registered to indicate activity on CPUs [ 2.146088] oprofile: using arm/armv7 [ 2.151183] Initializing XFRM netlink socket [ 2.156263] NET: Registered protocol family 10 [ 2.166936] sit: IPv6 over IPv4 tunneling driver [ 2.175687] NET: Registered protocol family 17 [ 2.180618] NET: Registered protocol family 15 [ 2.185846] Key type dns_resolver registered [ 2.190705] omap_voltage_late_init: Voltage driver support not added [ 2.197442] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.205934] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.216197] ThumbEE CPU extension supported. [ 2.220853] Registering SWP/SWPB emulation handler [ 2.225904] SmartReflex Class3 initialized [ 2.295143] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.302443] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.312968] mmc1: new high speed MMC card at address 0001 [ 2.325044] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.333306] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.341070] hctosys: unable to open rtc device (rtc0) [ 2.346389] sr_init: No PMIC hook to init smartreflex [ 2.352176] sr_init: platform driver register failed for SR [ 2.392263] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.400219] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.414437] mmcblk1: p1 p2 [ 2.431703] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [bbb 01:52]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:53]: got exception: timeout ~$off

[PYBOOT] [bbb 01:55]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.712559] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.719641] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.745739] rtc-ds1307 2-006f: SET TIME! [ 1.751496] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.758263] rtc-ds1307 2-006f: 64 bytes nvram [ 1.762879] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.771045] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.776837] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.785090] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.794250] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.801129] hub 1-0:1.0: USB hub found [ 1.805085] hub 1-0:1.0: 1 port detected [ 1.809489] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.815276] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.823397] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.832415] hub 2-0:1.0: USB hub found [ 1.836387] hub 2-0:1.0: 1 port detected [ 1.842385] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.876365] vdd_3v3: supplied by regen1 [ 1.914439] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.932605] aic_dvdd_fixed: disabling [ 1.937348] Waiting for root device /dev/mmcblk0p1... [ 1.964511] mmc1: new high speed MMC card at address 0001 [ 1.970488] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.975367] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.981697] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.988565] mmcblk1: p1 [ 2.115238] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.150262] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.175505] hub 2-1:1.0: USB hub found [ 2.179483] hub 2-1:1.0: 4 ports detected [ 2.271529] hub 1-1:1.0: USB hub found [ 2.275514] hub 1-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 01:47]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:48]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:49]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.713262] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.720345] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.745702] rtc-ds1307 2-006f: SET TIME! [ 1.751500] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.758256] rtc-ds1307 2-006f: 64 bytes nvram [ 1.762872] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.771053] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.776844] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.785091] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.794261] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.801141] hub 1-0:1.0: USB hub found [ 1.805100] hub 1-0:1.0: 1 port detected [ 1.809507] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.815287] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.823407] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.832414] hub 2-0:1.0: USB hub found [ 1.836387] hub 2-0:1.0: 1 port detected [ 1.842395] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.876313] vdd_3v3: supplied by regen1 [ 1.912928] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.930768] aic_dvdd_fixed: disabling [ 1.935549] Waiting for root device /dev/mmcblk0p1... [ 1.957271] mmc1: new high speed MMC card at address 0001 [ 1.963237] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.968123] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.974459] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.981321] mmcblk1: p1 [ 2.115188] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.150214] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.175512] hub 2-1:1.0: USB hub found [ 2.179490] hub 2-1:1.0: 4 ports detected [ 2.271536] hub 1-1:1.0: USB hub found [ 2.275530] hub 1-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 02:12]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 02:13]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 02:14]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.590520] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.597571] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.622860] rtc-ds1307 2-006f: SET TIME! [ 1.628484] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.635199] rtc-ds1307 2-006f: 64 bytes nvram [ 1.639787] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.647172] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.652954] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.661177] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.670331] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.677053] hub 1-0:1.0: USB hub found [ 1.681006] hub 1-0:1.0: 1 port detected [ 1.685321] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.691094] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.699179] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.708046] hub 2-0:1.0: USB hub found [ 1.711985] hub 2-0:1.0: 1 port detected [ 1.717259] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.753096] vdd_3v3: supplied by regen1 [ 1.784168] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.797092] aic_dvdd_fixed: disabling [ 1.802468] Waiting for root device /dev/mmcblk0p1... [ 1.849397] mmc1: new high speed MMC card at address 0001 [ 1.855267] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.860097] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.866393] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.873177] mmcblk1: p1 [ 1.992398] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.022419] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.051281] hub 2-1:1.0: USB hub found [ 2.055258] hub 2-1:1.0: 4 ports detected [ 2.147280] hub 1-1:1.0: USB hub found [ 2.151248] hub 1-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 01:47]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:48]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:49]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.175066] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.181935] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.192329] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.197189] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.203509] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.210352] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.219948] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.229445] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.236493] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.283973] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.290270] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.297135] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.306719] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.316218] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.323263] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.329382] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.335691] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.342537] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.352122] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.361628] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.368673] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.375374] vdd_3v3: supplied by regen1 [ 2.414097] hctosys: unable to open rtc device (rtc0) [ 2.419394] sr_init: No PMIC hook to init smartreflex [ 2.424897] sr_init: platform driver register failed for SR [ 2.465729] mmc1: new high speed MMC card at address 0001 [ 2.472441] aic_dvdd_fixed: disabling [ 2.473700] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.474368] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.475037] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.484831] mmcblk1: p1 [ 2.496526] ldousb: disabling [ 2.502505] Waiting for root device /dev/mmcblk0p1...

[PYBOOT] [beagleboard-x15 01:42]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:43]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:45]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[....] Synthesizing the initial hotplug events...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 41.864819] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 41.879156] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 85.243574] random: dd urandom read with 57 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

[ 89.639876] eth0: device MAC address 06:a9:1a:88:03:48 [ 89.793016] RX IPC Checksum Offload disabled [ 89.797624] No MAC Management Counters available [ 89.803381] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/06:a9:1a:88:03:48 Sending on LPF/eth0/06:a9:1a:88:03:48 Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 16 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 18 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7

[PYBOOT] [colombus 03:17]: Timed out waiting for "<type 'str'>":

[PYBOOT] [colombus 03:18]: got exception: timeout ~$off

[PYBOOT] [colombus 03:19]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

[ 14.466122] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.540361] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.550685] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.624869] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.635191] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.709441] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.719772] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.793954] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.804277] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.878576] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.888891] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.963075] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.973402] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.047665] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.058025] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.132380] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.142702] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.216937] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.227255] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.301486] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.311809] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.386075] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.396423] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.470748] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.481071] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.555247] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.565565] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.639792] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.650109] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.724293] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.734612] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.808842] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.819165] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:00]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 14.082584] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.156570] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.166645] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.240629] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.250704] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.324686] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.334765] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.408756] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.418834] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.492825] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.502902] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.576891] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.586958] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.660945] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.671017] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.745007] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.755078] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.829065] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.839137] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.913126] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.923196] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.997183] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.007257] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.081245] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.091317] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.165297] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.175377] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.249401] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.259467] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.333456] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.343531] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.417513] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.427592] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 02:00]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:01]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:02]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 13.873114] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 17.947025] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 17.957079] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.030990] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.041042] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.114954] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.125008] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.198920] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.208981] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.282896] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.292956] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.366874] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.376938] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.450866] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.460925] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.534830] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.544877] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.618786] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.628833] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.702739] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.712796] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.786707] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.796762] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 62.870666] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 62.880718] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 66.954632] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 66.964683] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.038597] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.048657] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.122572] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.132630] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.206536] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.216594] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 01:56]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 01:57]: got exception: timeout ~$off

[PYBOOT] [cosmic 01:58]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.480322] Key type dns_resolver registered [ 2.486714] ThumbEE CPU extension supported. [ 2.491131] Registering SWP/SWPB emulation handler [ 2.537612] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.543005] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.549687] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.563084] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.569898] [drm] No driver support for vblank timestamp query. [ 2.583672] mmc1: new high speed MMC card at address 0001 [ 2.591615] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.598111] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.606193] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.614129] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.627644] mmcblk1: p1 [ 2.746931] Console: switching to colour frame buffer device 240x75 [ 2.833933] drm drm: fb0: frame buffer device [ 2.855087] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.865345] usb2_vbus: supplied by vdd-sys-5v0 [ 2.876124] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.881724] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.890575] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.905125] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.915468] hub 1-0:1.0: USB hub found [ 2.919482] hub 1-0:1.0: 1 port detected [ 2.930016] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.942764] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.998177] dvdd_ts: disabling [ 3.001428] usb1_vbus: disabling [ 3.004689] vdd_cam_1v8_reg: disabling [ 3.012031] Waiting for root device /dev/mmcblk0p1... [ 3.230081] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.186962] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 77.354791] random: nonblocking pool is initialized

[PYBOOT] [dalmore 02:46]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 02:47]: got exception: timeout ~$off

[PYBOOT] [dalmore 02:49]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.486682] Key type dns_resolver registered [ 2.493094] ThumbEE CPU extension supported. [ 2.497533] Registering SWP/SWPB emulation handler [ 2.525194] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.532430] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.542599] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.557004] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.563810] [drm] No driver support for vblank timestamp query. [ 2.590430] mmc1: new high speed MMC card at address 0001 [ 2.598036] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.603856] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.612293] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.619448] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.630237] mmcblk1: p1 [ 2.741768] Console: switching to colour frame buffer device 240x75 [ 2.829116] drm drm: fb0: frame buffer device [ 2.848998] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.859116] usb2_vbus: supplied by vdd-sys-5v0 [ 2.870873] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.876495] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.885326] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.899029] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.908357] hub 1-0:1.0: USB hub found [ 2.912476] hub 1-0:1.0: 1 port detected [ 2.922207] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.935728] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.999420] dvdd_ts: disabling [ 3.002522] usb1_vbus: disabling [ 3.005886] vdd_cam_1v8_reg: disabling [ 3.013192] Waiting for root device /dev/mmcblk0p1... [ 3.229034] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.207656] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 65.173006] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:56]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:57]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:58]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 2.036267] can: broadcast manager protocol (rev 20120528 t) [ 2.042022] can: netlink gateway (rev 20130117) max_hops=1 [ 2.048704] Key type dns_resolver registered [ 2.053826] ThumbEE CPU extension supported. [ 2.085541] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.090477] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.100565] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.122735] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.129416] [drm] No driver support for vblank timestamp query. [ 2.293070] Console: switching to colour frame buffer device 240x75 [ 2.378976] drm drm: fb0: frame buffer device [ 2.383591] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.391562] usb2_vbus: supplied by vdd-sys-5v0 [ 2.397531] mmc1: new high speed MMC card at address 0001 [ 2.406791] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.412368] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.420446] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.425473] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.432184] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.438270] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.444696] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.450850] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.458599] mmcblk1: p1 [ 2.463494] hub 1-0:1.0: USB hub found [ 2.471836] hub 1-0:1.0: 1 port detected [ 2.479992] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.490457] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.523340] dvdd_ts: disabling [ 2.526490] usb1_vbus: disabling [ 2.529793] vdd_cam_1v8_reg: disabling [ 2.535227] Waiting for root device /dev/mmcblk0p1... [ 2.784629] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.736911] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f

[PYBOOT] [dalmore 01:49]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:50]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:51]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------

[ 2.655996] Bluetooth: RFCOMM ver 1.11 [ 2.659940] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.665334] Bluetooth: BNEP socket layer initialized [ 2.670428] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.676426] Bluetooth: HIDP socket layer initialized [ 2.683422] Key type dns_resolver registered [ 2.693038] Registering SWP/SWPB emulation handler [ 2.725148] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.731618] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.742536] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.766394] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.773199] [drm] No driver support for vblank timestamp query. [ 2.951020] Console: switching to colour frame buffer device 240x75 [ 3.038195] drm drm: fb0: frame buffer device [ 3.068791] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.076022] usb2_vbus: supplied by vdd-sys-5v0 [ 3.085295] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.091098] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.100212] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.118944] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.132389] hub 1-0:1.0: USB hub found [ 3.136434] hub 1-0:1.0: 1 port detected [ 3.150463] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.164580] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.252658] dvdd_ts: disabling [ 3.255761] usb1_vbus: disabling [ 3.259147] vdd_cam_1v8_reg: disabling [ 3.263818] ALSA device list: [ 3.266810] #0: NVIDIA Tegra Dalmore [ 3.272656] Waiting for root device /dev/mmcblk0p1... [ 3.458783] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.493241] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 63.300014] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:45]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:46]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:47]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------

[ 1.683607] usbcore: registered new interface driver usbhid [ 1.688851] usbhid: USB HID core driver [ 1.697518] NET: Registered protocol family 10 [ 1.698138] sit: IPv6 over IPv4 tunneling driver [ 1.701352] NET: Registered protocol family 17 [ 1.705389] NET: Registered protocol family 15 [ 1.709838] Key type dns_resolver registered [ 1.714163] Registering SWP/SWPB emulation handler [ 1.720008] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.724576] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.751139] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.752992] max98090 1-0010: MAX98090 REVID=0x43 [ 1.755274] max98090 1-0010: use default 2.8v micbias [ 1.765170] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.772770] usb 1-3: New USB device found, idVendor=0424, idProduct=3503 [ 1.772775] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.773284] hub 1-3:1.0: USB hub found [ 1.773431] hub 1-3:1.0: 3 ports detected [ 1.779301] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.781344] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.809321] mmc1: new DDR MMC card at address 0001 [ 1.814301] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.818296] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.827613] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.832747] VDD10_HDMI_1.0V: disabling [ 1.833390] vdd_g3d: disabling [ 1.834016] BUCK8_2.8V: disabling [ 1.835s19] ALSA device list: [ 1.835323] #0: Odroid-U3 [ 1.849147] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.855040] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.861549] mmcblk1: p1 p2 [ 1.865407] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [odroidu3 01:47]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 01:48]: got exception: timeout ~$off

[PYBOOT] [odroidu3 01:49]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.326211] 1c20: 00000004 c03012c8 0000af73 00000000 00000000 eefcd2c0 ee06df80 a0000193 [ 2.334773] 1c40: ee06e000 fa212000 fa213000 c1301e10 c1301cd4 c036d16c 00000000 00000001 [ 2.343321] 1c60: ffffffff 00ffffff 00358293 00000000 ee042100 eefcd2c0 ee042100 00000400 [ 2.351885] 1c80: 00000000 c12082c0 c1302684 c036f8d8 ee042154 00000001 ee042110 c1413f4b [ 2.360454] 1ca0: ffffffff c0594704 00000010 0000000a c0589874 20000193 ffffffff c1301cfc [ 2.369005] 1cc0: 0000270f c030c420 000246dc 00000032 00000002 0000f970 00000000 ee0d5410 [ 2.377562] 1ce0: 000346dc 00000005 0000270f c133f970 00000052 00000004 00000000 c1301d18 [ 2.386124] 1d00: c06dd1bc c0589874 20000193 ffffffff 00000051 c06dd1bc 00000032 ee0d5410 [ 2.394682] 1d20: ee0d5410 c06dd238 00000000 c1413f44 00000052 c06dd248 c1413f4a c1413f96 [ 2.403234] 1d40: ee0d5410 c06bcdd8 ee0d5410 00000001 60000193 00000001 00000000 c06dd310 [ 2.411784] 1d60: c06dd260 c139f450 c1413a30 00000052 c143437c 00000000 c1300000 00000000 [ 2.420329] 1d80: 000000e6 c0381c30 000000e7 00000000 00000001 00000052 c14339b0 00000006 [ 2.428889] 1da0: 00000000 c03827a8 00000400 00000042 00000002 c1413a30 60000193 00000000 [ 2.437450] 1dc0: c1337708 c0ee2ae8 00000001 c1300000 c13024a4 00000000 c1413a30 00000042 [ 2.446000] 1de0: c1413a30 c1337708 c143637e 00000000 00000000 00000000 00000000 c0382be4 [ 2.454554] 1e00: 00000000 00000000 00000000 00000000 c143637e 00000042 00000001 00000000 [ 2.463115] 1e20: 60000193 00000000 00000000 00001de2 00000000 c1300000 c1301f58 8000000d [ 2.471673] 1e40: c1339cc8 c1301f58 c1302504 c140dee8 c130250c c0382f38 c0ecdea0 c1301e7c [ 2.480232] 1e60: ffff173b c03c7cb4 00000000 c1301e7c c1204400 c031cb7c c0ecdea0 c0ecde90 [ 2.488785] 1e80: c1300000 c143675c c1339cc8 c0317cac 77359400 00000000 00000001 c13087fc [ 2.497335] 1ea0: 0000000d c0317cac c1300000 c0317cb4 c13087fc c030137c 00000000 c03a4a70 [ 2.505893] 1ec0: 0000e000 c03452d8 00000000 eefcfec0 eefcfec0 00000000 7a6830d8 00000000 [ 2.514452] 1ee0: ffffffff 7fffffff c1300000 c1300000 00000000 00000000 c1301f50 fa212000 [ 2.523017] 1f00: fa213000 c140dee8 c130250c c0345640 c12054cc c030ea78 c1302880 c1340078 [ 2.531570] 1f20: fa21200c c1301f50 fa212000 c03017d4 c0308740 a0000013 ffffffff c1301f84 [ 2.540125] 1f40: c1300000 60000093 ffffffff c1301f8c c12075c0 c030c58c 00000000 2ddc5000 [ 2.548684] 1f60: c12075c0 c1301fa8 c1300000 c13024a4 00000000 00000000 c12075c0 c1302504 [ 2.557241] 1f80: c140dee8 c130250c 60000013 c1301fa8 c0378154 c1300000 60000093 ffffffff [ 2.565800] 1fa0: 00000051 c03780bc c1301fb4 c1301fa8 00000000 ffffffff 00000000 c1100c4c [ 2.574357] 1fc0: ffffffff ffffffff 00000000 c1100684 00000000 c11a3a30 c14105d4 c1302480 [ 2.582911] 1fe0: c11a3a2c c1307c4c 8020406a 412fc0f2 00000000 8020807c 00000000 00000000 [ 2.591485] [<c059637c>] (vsnprintf) from [<c1337708>] (0xc1337708) [ 2.598043] Code: bad PC value [ 2.601240] ---[ end trace 879030e043801cb5 ]--- [ 2.606067] Kernel panic - not syncing: Attempted to kill the idle task!

[PYBOOT] [omap5uevm 00:50]: got exception: panic ~$off

[PYBOOT] [omap5uevm 00:51]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.312079] r7 : ee00b454 r6 : 00000001 r5 : 00000034 r4 : 000001a0 [ 2.318881] r3 : ee00b455 r2 : 00000008 r1 : 00000000 r0 : 00000000 [ 2.325682] Flags: nzcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 2.333207] Control: 10c5387d Table: 8020406a DAC: 00000051 [ 2.339192] Process swapper/1 (pid: 0, stack limit = 0xee090220) [ 2.345444] Stack: (0xee091ea8 to 0xee092000) [ 2.349981] 1ea0: ee694000 eefd92c0 00000031 eefd9388 eefd92c0 eefd92c0 [ 2.358493] 1ec0: ee694140 c0374b98 fa213000 c140dee8 ee091eec c036075c eefd92c0 eefd92c0 [ 2.367011] 1ee0: a0000193 ee694000 eefd92c0 a0000193 0000e000 fa212000 fa213000 c140dee8 [ 2.375535] 1f00: ee091f14 c03628a4 00000000 eefd92c0 ee091f2c c03639bc c12082c0 c1302684 [ 2.384059] 1f20: ffffe000 0000e000 ee091f4c c0364df0 c12054cc 00000001 00000000 ee091f88 [ 2.392577] 1f40: fa212000 fa213000 c130250c c030ea78 c1302880 c1340078 fa21200c ee091f88 [ 2.401092] 1f60: fa212000 c03017d4 c0308740 a0000013 ffffffff ee091fbc c12075c0 c1302504 [ 2.409610] 1f80: c140dee8 c030c494 00000001 00000000 ea000013 f0880000 ee090000 c13024a4 [ 2.418134] 1fa0: 00000000 00000000 c12075c0 c1302504 c140dee8 c130250c 2ddd1000 ee091fd8 [ 2.426646] 1fc0: c032aee0 c0308740 a0000013 ffffffff 00000051 c030873c ee090000 c03781e0 [ 2.435163] 1fe0: 00000051 ee091fe0 ae07806a c14106b0 00000000 80301c8c 08b8c0e0 2d9940a1 [ 2.443687] [<c03783b4>] (cpupri_set) from [<c0374b98>] (enqueue_task_rt+0x168/0x2f4) [ 2.451845] [<c0374b98>] (enqueue_task_rt) from [<c03628a4>] (ttwu_do_activate.constprop.17+0x2c/0x64) [ 2.461548] [<c03628a4>] (ttwu_do_activate.constprop.17) from [<c03639bc>] (sched_ttwu_pending+0x64/0x80) [ 2.471518] [<c03639bc>] (sched_ttwu_pending) from [<c0364df0>] (scheduler_ipi+0x50/0x144) [ 2.480127] [<c0364df0>] (scheduler_ipi) from [<c030ea78>] (handle_IPI+0x120/0x18c) [ 2.488100] [<c030ea78>] (handle_IPI) from [<c03017d4>] (gic_handle_irq+0x90/0x94) [ 2.495981] [<c03017d4>] (gic_handle_irq) from [<c030c494>] (__irq_svc+0x54/0x70) [ 2.503779] Exception stack(0xee091f88 to 0xee091fd0) [ 2.509034] 1f80: 00000001 00000000 ea000013 f0880000 ee090000 c13024a4 [ 2.517551] 1fa0: 00000000 00000000 c12075c0 c1302504 c140dee8 c130250c 2ddd1000 ee091fd8 [ 2.526069] 1fc0: c032aee0 c0308740 a0000013 ffffffff [ 2.531330] [<c030c494>] (__irq_svc) from [<c0308740>] (arch_cpu_idle+0x20/0x3c) [ 2.539035] [<c0308740>] (arch_cpu_idle) from [<c03781e0>] (cpu_startup_entry+0x1bc/0x218) [ 2.547646] [<c03781e0>] (cpu_startup_entry) from [<80301c8c>] (0x80301c8c) [ 2.554901] Code: e1a06186 e0873006 f593f000 e1932f9f (e2422001) [ 2.561249] ---[ end trace be0ceaa26d159b65 ]--- [ 3.063585] SMP: failed to stop secondary CPUs [ 3.068217] ---[ end Kernel panic - not syncing: Attempted to kill the idle task!

[PYBOOT] [omap5uevm 00:50]: got exception: panic ~$off

[PYBOOT] [omap5uevm 00:51]: Done. Board omap5uevm-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 2.867576] [<c0301620>] (gic_handle_irq) from [<c030bcd4>] (__irq_svc+0x54/0x70) [ 2.875410] Exception stack(0xee501b78 to 0xee501bc0) [ 2.880700] 1b60: 00000001 ee072254 [ 2.889256] 1b80: 00000000 ee502000 ee482200 00000000 ee06c000 00000000 ee501bc8 ee4823a8 [ 2.897819] 1ba0: c0934b32 00000000 ee072240 ee501bc8 c0357e7c c03373b0 60000113 ffffffff [ 2.906384] [<c030bcd4>] (__irq_svc) from [<c03373b0>] (do_exit+0x524/0x908) [ 2.913765] [<c03373b0>] (do_exit) from [<c030b5c4>] (die+0x328/0x394) [ 2.920604] [<c030b5c4>] (die) from [<c031a290>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 2.928897] [<c031a290>] (__do_kernel_fault.part.0) from [<c0315580>] (do_page_fault+0x370/0x384) [ 2.938185] [<c0315580>] (do_page_fault) from [<c030125c>] (do_DataAbort+0x3c/0xb8) [ 2.946208] [<c030125c>] (do_DataAbort) from [<c030bc60>] (__dabt_svc+0x40/0x60) [ 2.953953] Exception stack(0xee501d50 to 0xee501d98) [ 2.959242] 1d40: 00000000 00000087 0000003a 00000000 [ 2.967810] 1d60: 20000013 00000000 00000001 c200af44 c200af44 00000000 00000000 00000000 [ 2.976376] 1d80: ee501de8 ee501da0 c0934eec c0934b30 60000093 ffffffff [ 2.983294] [<c030bc60>] (__dabt_svc) from [<c0934b30>] (__of_find_all_nodes.part.2+0x14/0x2c) [ 2.992311] [<c0934b30>] (__of_find_all_nodes.part.2) from [<c0934eec>] (of_find_node_by_phandle+0x70/0x88) [ 3.002517] [<c0934eec>] (of_find_node_by_phandle) from [<c093504c>] (__of_parse_phandle_with_args+0x148/0x224) [ 3.013083] [<c093504c>] (__of_parse_phandle_with_args) from [<c0935150>] (of_parse_phandle+0x28/0x50) [ 3.022818] [<c0935150>] (of_parse_phandle) from [<c0975bb8>] (extcon_get_edev_by_phandle+0x2c/0xec) [ 3.032381] [<c0975bb8>] (extcon_get_edev_by_phandle) from [<c0850bb8>] (dwc3_omap_probe+0x25c/0x3fc) [ 3.042030] [<c0850bb8>] (dwc3_omap_probe) from [<c070108c>] (platform_drv_probe+0x50/0xb0) [ 3.050777] [<c070108c>] (platform_drv_probe) from [<c06ff8d4>] (driver_probe_device+0x208/0x2b4) [ 3.060074] [<c06ff8d4>] (driver_probe_device) from [<c06fdcf4>] (bus_for_each_drv+0x60/0x94) [ 3.068994] [<c06fdcf4>] (bus_for_each_drv) from [<c06ff5ec>] (__device_attach+0xb0/0x114) [ 3.077645] [<c06ff5ec>] (__device_attach) from [<c06fead0>] (bus_probe_device+0x84/0x8c) [ 3.086210] [<c06fead0>] (bus_probe_device) from [<c06fef5c>] (deferred_probe_work_func+0x68/0x94) [ 3.095590] [<c06fef5c>] (deferred_probe_work_func) from [<c03489dc>] (process_one_work+0x1d4/0x3e0) [ 3.105156] [<c03489dc>] (process_one_work) from [<c0348c34>] (worker_thread+0x4c/0x55c) [ 3.113627] [<c0348c34>] (worker_thread) from [<c034db14>] (kthread+0xd4/0xec) [ 3.121193] [<c034db14>] (kthread) from [<c0307998>] (ret_from_fork+0x14/0x3c) [ 3.128753] Code: e7973106 e3530000 128d2004 15832004 (e7875106) [ 3.135131] ---[ end trace cb88537fdc8fa203 ]--- [ 3.139954] Kernel panic - not syncing: Fatal exception in interrupt [ 3.146603] ---[ end Kernel panic - not syncing: Fatal exception in interrupt

[PYBOOT] [omap5uevm 00:48]: got exception: panic ~$off

[PYBOOT] [omap5uevm 00:49]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.656943] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.667324] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.673811] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.679234] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.687683] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.703501] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.710487] hub 3-0:1.0: USB hub found [ 1.714934] hub 3-0:1.0: 1 port detected [ 1.719989] mmc2: switch to bus width 8 failed [ 1.727002] mmc2: switch to bus width 4 failed [ 1.731519] mmc2: new high speed MMC card at address 0001 [ 1.738010] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.742928] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.749163] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.756348] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.762995] [drm] No driver support for vblank timestamp query. [ 1.769817] mmcblk2: p3 [ 1.776456] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.790225] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.798845] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.811821] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.830986] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.835406] mmc0: new SDIO card at address 0001 [ 1.875076] Console: switching to colour frame buffer device 170x48 [ 1.913757] drm drm: fb0: frame buffer device [ 1.928495] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.935284] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.964314] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.978597] vdd_1v5: disabling [ 1.981652] vdd_1v2: disabling [ 2.587042] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.598623] Waiting for root device /dev/mmcblk0p3... [ 58.577402] random: nonblocking pool is initialized

[PYBOOT] [seaboard 01:55]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:56]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:57]: Done. Board seaboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.606965] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.613301] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.623202] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.629649] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.635060] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.642815] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.658146] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.664618] hub 3-0:1.0: USB hub found [ 1.668463] hub 3-0:1.0: 1 port detected [ 1.678983] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.685595] [drm] No driver support for vblank timestamp query. [ 1.692435] mmc2: switch to bus width 8 failed [ 1.697128] mmc2: switch to bus width 4 failed [ 1.701603] mmc2: new high speed MMC card at address 0001 [ 1.707309] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.719292] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.725656] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.726916] mmcblk2: p3 [ 1.749946] Console: switching to colour frame buffer device 170x48 [ 1.776531] drm drm: fb0: frame buffer device [ 1.781005] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.787415] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.794286] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.805858] vdd_1v5: disabling [ 1.808937] vdd_1v2: disabling [ 1.812382] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.825529] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.833738] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.846171] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.869898] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.878412] mmc0: new SDIO card at address 0001 [ 2.552341] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.563195] Waiting for root device /dev/mmcblk0p3...

[PYBOOT] [seaboard 01:50]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:51]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:52]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------

[ 1.622275] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.622308] Bluetooth: BNEP socket layer initialized [ 1.622321] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.622351] Bluetooth: HIDP socket layer initialized [ 1.622953] Key type dns_resolver registered [ 1.624173] Registering SWP/SWPB emulation handler [ 1.651832] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.652389] VDDIO_HDMI: supplied by vdd_5v0 [ 1.652670] vdd_sys: supplied by vdd_5v0 [ 1.652769] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.653049] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.653616] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.657670] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.657702] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.657768] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.658312] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.681505] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.686618] hub 3-0:1.0: USB hub found [ 1.686682] hub 3-0:1.0: 1 port detected [ 1.701867] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.701870] [drm] No driver support for vblank timestamp query. [ 1.779791] mmc0: new SDIO card at address 0001 [ 1.808849] Console: switching to colour frame buffer device 170x48 [ 1.833282] drm drm: fb0: frame buffer device [ 1.861495] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.868760] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 1.876490] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.896483] vdd_1v5: disabling [ 1.899549] vdd_1v2: disabling [ 1.902747] ALSA device list: [ 1.905708] #0: NVIDIA Tegra Seaboard [ 2.332392] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.343666] Waiting for root device /dev/mmcblk0p3...

[PYBOOT] [seaboard 01:50]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:51]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:52]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 3.192848] EXT4-fs (mmcblk0p3): warning: mounting fs with errors, running e2fsck is recommended [ 3.201201] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 4.235379] random: dd urandom read with 58 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

Cannot find device "eth0" Bind socket to interface: No such device Failed to bring up eth0. [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[ ok 8[?25h[?0c. [....] Starting web server: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [?25l[?1c7[ ok 8[?25h[?0c. [....] Starting periodic command scheduler: cron[?25l[?1c7[ ok 8[?25h[?0c. [....] Loading cpufreq kernel modules...[?25l[?1c7[ ok 8[?25h[?0cdone (none). [....] Starting system message bus: dbus[?25l[?1c7[ ok 8[?25h[?0c. [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[ ok 8[?25h[?0c.

[PYBOOT] [snow 03:11]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snow 03:12]: got exception: timeout ~$off

[PYBOOT] [snow 03:13]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.932464] ledtrig-cpu: registered to indicate activity on CPUs [ 1.939300] usbcore: registered new interface driver usbhid [ 1.944885] usbhid: USB HID core driver [ 1.958953] NET: Registered protocol family 10 [ 1.965209] sit: IPv6 over IPv4 tunneling driver [ 1.971069] NET: Registered protocol family 17 [ 1.975585] can: controller area network core (rev 20120528 abi 9) [ 1.981903] NET: Registered protocol family 29 [ 1.986389] can: raw protocol (rev 20120528) [ 1.990692] can: broadcast manager protocol (rev 20120528 t) [ 1.996368] can: netlink gateway (rev 20130117) max_hops=1 [ 2.002716] Key type dns_resolver registered [ 2.007385] ThumbEE CPU extension supported. [ 2.011718] Registering SWP/SWPB emulation handler [ 2.024353] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.031494] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.041046] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.048095] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.055114] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.062133] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.079467] db8500-esram12: disabling [ 2.083312] db8500-esram34: disabling [ 2.087402] V-CSI/DSI: disabling [ 2.090789] mmci-reg: disabling [ 2.095886] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.101928] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.110595] Waiting for root device /dev/mmcblk0p4... [ 2.146301] mmc3: new high speed MMC card at address 0001 [ 2.152618] mmcblk3: mmc3:0001 3.53 GiB [ 2.157043] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.162872] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.168670] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.175537] mmcblk3: p1 p2 p3 p4

[PYBOOT] [snowball 02:07]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:08]: got exception: timeout ~$off

[PYBOOT] [snowball 02:09]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.898071] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.905578] ledtrig-cpu: registered to indicate activity on CPUs [ 1.911834] usbcore: registered new interface driver usbhid [ 1.917419] usbhid: USB HID core driver [ 1.924652] NET: Registered protocol family 10 [ 1.979980] sit: IPv6 over IPv4 tunneling driver [ 1.985137] NET: Registered protocol family 17 [ 1.989624] can: controller area network core (rev 20120528 abi 9) [ 1.995849] NET: Registered protocol family 29 [ 2.000305] can: raw protocol (rev 20120528) [ 2.004577] can: broadcast manager protocol (rev 20120528 t) [ 2.010253] can: netlink gateway (rev 20130117) max_hops=1 [ 2.016174] Key type dns_resolver registered [ 2.020629] ThumbEE CPU extension supported. [ 2.074981] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.089660] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.098754] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.105743] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.112731] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.119689] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.131347] db8500-esram12: disabling [ 2.179138] db8500-esram34: disabling [ 2.197875] V-CSI/DSI: disabling [ 2.209106] mmci-reg: disabling [ 2.212707] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.218658] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.239837] Waiting for root device /dev/mmcblk0p4... [ 3.040924] mmc3: new high speed MMC card at address 0001 [ 3.054748] mmcblk3: mmc3:0001 3.53 GiB [ 3.063903] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 3.069396] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 3.083923] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 3.095764] mmcblk3: p1 p2 p3 p4

[PYBOOT] [snowball 02:01]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:02]: got exception: timeout ~$off

[PYBOOT] [snowball 02:03]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------

[ 2.733398] iio iio:device1: registered pressure sensor lps001wp [ 2.741699] coresight-tpiu 80190000.tpiu: TPIU initialized [ 2.749511] coresight-etb10 801a4000.etb: ETB initialized [ 2.756713] coresight-funnel 801a6000.funnel: FUNNEL initialized [ 2.764862] coresight-replicator soc:replicator: REPLICATOR initialized [ 2.806671] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.817687] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.834472] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.845336] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.882202] NET: Registered protocol family 10 [ 2.889648] sit: IPv6 over IPv4 tunneling driver [ 2.897094] NET: Registered protocol family 17 [ 2.901641] NET: Registered protocol family 35 [ 2.906158] NET: Registered protocol family 37 [ 2.910797] Registering SWP/SWPB emulation handler [ 2.917114] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.923400] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.930023] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.945678] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-14 15:24:53 UTC (955725893) [ 2.955017] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.962097] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.969085] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.976104] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.989593] db8500-esram12: disabling [ 2.993438] db8500-esram34: disabling [ 2.997314] V-CSI/DSI: disabling [ 3.000610] mmci-reg: disabling [ 3.003936] ALSA device list: [ 3.006896] #0: MOP500-card [ 3.010253] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 3.016204] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 3.022460] Waiting for root device /dev/mmcblk0p4... [ 78.930175] random: nonblocking pool is initialized

[PYBOOT] [snowball 01:54]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 01:55]: got exception: timeout ~$off

[PYBOOT] [snowball 01:56]: Done. Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

[ 20.060280] mmcblk0: error -110 sending status command, retrying [ 20.068751] mmcblk0: error -110 sending status command, aborting [ 20.079853] mmcblk0: error -110 sending status command, retrying [ 20.088314] mmcblk0: error -110 sending status command, retrying [ 20.096754] mmcblk0: error -110 sending status command, aborting [ 20.107772] mmcblk0: error -110 sending status command, retrying [ 20.116213] mmcblk0: error -110 sending status command, retrying [ 20.124641] mmcblk0: error -110 sending status command, aborting [ 20.135711] mmcblk0: error -110 sending status command, retrying [ 20.144144] mmcblk0: error -110 sending status command, retrying [ 20.152604] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty"

INIT: Id "5" respawning too fast: disabled for 5 minutes INIT: Id "2[ 20.201749] mmcblk0: error -110 sending status command, retrying " respawning too fast: disabled f[ 20.210619] mmcblk0: error -110 sending status command, retrying or 5 minutes INIT: Id "3" resp[ 20.219424] mmcblk0: error -110 sending status command, aborting awning too fast: disabled for 5 minutes INIT: Id "6" respawnin[ 20.230882] mmcblk0: error -110 sending status command, retrying g too fast: disabled for 5 minute[ 20.239963] mmcblk0: error -110 sending status command, retrying s [ 20.248819] mmcblk0: error -110 sending status command, aborting INIT: INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty"

INIT: Id "S1" respawning too fast: disabled for 5 minutes INIT: Id "1" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 52.005016] random: nonblocking pool is initialized

[PYBOOT] [wandboard 02:55]: Timed out waiting for "<type 'str'>":

[PYBOOT] [wandboard 02:56]: got exception: timeout ~$off

[PYBOOT] [wandboard 02:57]: Done.