arm-soc boot: 7 passed 8 failed (arm-soc/v3.12-rc5-703-g932c441) - Kernel-build-reports

28 Oct 2013


      arndale             :	passed	0:48.99
    bbb                 :	FAILED	0:46.96
    beaver              :	passed	0:57.29
    multi-beaver        :	FAILED	0:41.71
    cubie               :	FAILED	0:44.59
    cubie2              :	FAILED	0:49.91
    cubox               :	passed	0:48.32
    panda               :	passed	2:47.31
    multi-panda         :	FAILED	0:41.08
    sama5               :	passed	1:48.33
    snowball            :	passed	1:01.29
    multi-snowball      :	FAILED	0:39.81
    multi-trimslice     :	FAILED	0:44.74
    wandboard           :	passed	1:05.91
    multi-wandboard     :	FAILED	0:39.60
Board legend:
Board               :	System                 SoC                  Defconfig
arndale             :	InSignal ArndaleBoard     Samsung Exynos 5250  exynos_defconfig
    bbb                 :	BeagleBone Black          TI Sitara AM3359     omap2plus_defconfig
    beaver              :	Nvidia Beaver             Nvidia Tegra 30      tegra_defconfig
    multi-beaver        :	                                               multi_v7_defconfig
    cubie               :	Cubieboard                Allwinner A10        multi_v7_defconfig
    cubie2              :	Cubieboard 2              Allwinner A20        multi_v7_defconfig
    cubox               :	SolidRun Cubox            Marvell 88AP510      dove_defconfig
    multi-trimslice     :	CompuLab TrimSlice        Nvidia Tegra 20      multi_v7_defconfig
    panda               :	TI PandaBoard ES          TI OMAP4460          omap2plus_defconfig
    multi-panda         :	                                               multi_v7_defconfig
    sama5               :	Atmel SAMA5 devboard      Atmel SAMA5D35       sama5_defconfig
    snowball            :	CALAO Snowball            ST-Ericsson A9500    u8500_defconfig
    multi-snowball      :	                                               multi_v7_defconfig
    wandboard           :	Wandboard                 Freescale i.MX6 Quad imx_v6_v7_defconfig
    multi-wandboard     :	                                               multi_v7_defconfig
Last entries of failed logs below:
========================================================================
Board bbb failure log:
    -------------------------------------------------
[    0.000000] Console: colour dummy device 80x30
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     16384
[    0.000000] ... MAX_LOCKDEP_CHAINS:      32768
[    0.000000] ... CHAINHASH_SIZE:          16384
[    0.000000]  memory used by lock dependency info: 3695 kB
[    0.000000]  per task-struct memory footprint: 1152 bytes
[    0.001479] Calibrating delay loop... 363.72 BogoMIPS (lpj=1818624)
[    0.109388] pid_max: default: 32768 minimum: 301
[    0.110018] Security Framework initialized
[    0.110212] Mount-cache hash table entries: 512
[    0.129502] CPU: Testing write buffer coherency: ok
[    0.131434] CPU0: thread -1, cpu 0, socket -1, mpidr 0
[    0.131528] Setting up static identity map for 0xc0526d68 - 0xc0526dd8
[    0.135742] Brought up 1 CPUs
[    0.135769] SMP: Total of 1 processors activated.
[    0.135785] CPU: All CPU(s) started in SVC mode.
[    0.140128] devtmpfs: initialized
[    0.154887] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    0.169289] ------------[ cut here ]------------
[    0.169348] WARNING: CPU: 0 PID: 1 at ../../arch/arm/mach-omap2/omap_hwmod.c:2438 _init+0x338/0x37c()
[    0.169366] omap_hwmod: spinlock: doesn't have mpu register target base
[    0.169380] Modules linked in:
[    0.169413] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.12.0-rc5-00703-g932c441 #1
[    0.169538] [<c001ba40>] (unwind_backtrace+0x0/0xec) from [<c0017b80>] (show_stack+0x10/0x14)
[    0.169572] [<c0017b80>] (show_stack+0x10/0x14) from [<c051b3a4>] (dump_stack+0x7c/0x94)
[    0.169605] [<c051b3a4>] (dump_stack+0x7c/0x94) from [<c00460a8>] (warn_slowpath_common+0x6c/0x90)
[    0.169632] [<c00460a8>] (warn_slowpath_common+0x6c/0x90) from [<c00460fc>] (warn_slowpath_fmt+0x30/0x40)
[    0.169661] [<c00460fc>] (warn_slowpath_fmt+0x30/0x40) from [<c076d8c4>] (_init+0x338/0x37c)
[    0.169690] [<c076d8c4>] (_init+0x338/0x37c) from [<c076dddc>] (__omap_hwmod_setup_all+0x40/0x8c)
[    0.169719] [<c076dddc>] (__omap_hwmod_setup_all+0x40/0x8c) from [<c0008848>] (do_one_initcall+0xe8/0x14c)
[    0.169757] [<c0008848>] (do_one_initcall+0xe8/0x14c) from [<c0761b8c>] (kernel_init_freeable+0x104/0x1c8)
[    0.169794] [<c0761b8c>] (kernel_init_freeable+0x104/0x1c8) from [<c05152a4>] (kernel_init+0x8/0x150)
[    0.169832] [<c05152a4>] (kernel_init+0x8/0x150) from [<c0013bc8>] (ret_from_fork+0x14/0x2c)
[    0.170051] ---[ end trace 1b75b31a2719ed1c ]---
~$off
========================================================================
Board cubie failure log:
    -------------------------------------------------
bootenv=uEnv.txt
bootfile=arm-soc/v3.12-rc5-703-g932c441/uImage.multi-1g
bootscr=boot.scr
console=ttyS0,115200
device=mmc
dnsip=172.16.1.1
ethact=emac
ethaddr=08:00:08:1e:2f:44
gatewayip=172.16.1.1
ipaddr=172.16.1.137
kernel=uImage
loadbootenv=fatload $device $partition $scriptaddr ${bootenv} || ext2load $device $partition $scriptaddr boot/${bootenv} || ext2load $device $partition $scriptaddr ${bootenv}
loadbootscr=fatload $device $partition $scriptaddr ${bootscr} || ext2load $device $partition $scriptaddr boot/${bootscr} ||ext2load $device $partition $scriptaddr ${bootscr}
loadkernel=if bootpath=/boot/ && ext2load $device $partition 0x43000000 ${bootpath}script.bin && ext2load $device $partition 0x48000000 ${bootpath}${kernel};then true; elif bootpath=/ && fatload $device $partition 0x43000000 script.bin && fatload $device $partition 0x48000000 ${kernel};then true; elif bootpath=/ && ext2load $device $partition 0x43000000 ${bootpath}script.bin && ext2load $device $partition 0x48000000 ${bootpath}${kernel};then true; else false;fi
loglevel=8
netmask=255.255.255.0
panicarg=panic=10
partition=0:1
scriptaddr=0x44000000
serverip=172.16.1.4
setargs=if test -z \"$root\"; then if test \"$bootpath\" = "boot/"; then root="/dev/mmcblk0p1 rootwait"; else root="/dev/mmcblk0p2 rootwait"; fi; fi; setenv bootargs console=${console} root=${root} loglevel=${loglevel} ${panicarg} ${extraargs}
stderr=serial
stdin=serial
stdout=serial
Environment size: 2102/131068 bytes
sun4i#printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie ip=dhcp
sun4i#tftpboot 0x41000000 172.16.1.4:/srv/tftp/arm-soc/v3.12-rc5-703-g932c441/uImage.multi-1g
tftpboot 0x41000000 172.16.1.4:/srv/tftp/arm-soc/v3.12-rc5-703-g932c441/uImage.multi-1g
Using emac device
TFTP from server 172.16.1.4; our IP address is 172.16.1.137
Filename '/srv/tftp/arm-soc/v3.12-rc5-703-g932c441/uImage.multi-1g'.
Load address: 0x41000000
Loading: *
TFTP error: 'File not found' (1)
Not retrying...
sun4i#node: cubie           status: on
~$off
========================================================================
Board cubie2 failure log:
    -------------------------------------------------
bootenv=uEnv.txt
bootfile=arm-soc/v3.12-rc5-703-g932c441/uImage.multi-1g
bootscr=boot.scr
console=ttyS0,115200
device=mmc
dnsip=172.16.1.1
ethact=emac
ethaddr=08:00:08:1e:2f:64
gatewayip=172.16.1.1
ipaddr=172.16.1.153
kernel=uImage
loadbootenv=fatload $device $partition $scriptaddr ${bootenv} || ext2load $device $partition $scriptaddr boot/${bootenv} || ext2load $device $partition $scriptaddr ${bootenv}
loadbootscr=fatload $device $partition $scriptaddr ${bootscr} || ext2load $device $partition $scriptaddr boot/${bootscr} ||ext2load $device $partition $scriptaddr ${bootscr}
loadkernel=if bootpath=/boot/ && ext2load $device $partition 0x43000000 ${bootpath}script.bin && ext2load $device $partition 0x48000000 ${bootpath}${kernel};then true; elif bootpath=/ && fatload $device $partition 0x43000000 script.bin && fatload $device $partition 0x48000000 ${kernel};then true; elif bootpath=/ && ext2load $device $partition 0x43000000 ${bootpath}script.bin && ext2load $device $partition 0x48000000 ${bootpath}${kernel};then true; else false;fi
loglevel=8
netmask=255.255.255.0
panicarg=panic=10
partition=0:1
scriptaddr=0x44000000
serverip=172.16.1.4
setargs=if test -z \"$root\"; then if test \"$bootpath\" = "boot/"; then root="/dev/mmcblk0p1 rootwait"; else root="/dev/mmcblk0p2 rootwait"; fi; fi; setenv bootargs console=${console} root=${root} loglevel=${loglevel} ${panicarg} ${extraargs}
stderr=serial
stdin=serial
stdout=serial
Environment size: 2103/131068 bytes
sun7i# printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200n8 root=/dev/nfs rootwait rw nfsroot=172.16.1.7:/work/nfsroot/cubie2 ip=dhcp
sun7i# tftpboot 0x41000000 172.16.1.4:/srv/tftp/arm-soc/v3.12-rc5-703-g932c441/uImage.multi-1g
tftpboot 0x41000000 172.16.1.4:/srv/tftp/arm-soc/v3.12-rc5-703-g932c441/uImage.multi-1g
Using emac device
TFTP from server 172.16.1.4; our IP address is 172.16.1.153
Filename '/srv/tftp/arm-soc/v3.12-rc5-703-g932c441/uImage.multi-1g'.
Load address: 0x41000000
Loading: *
TFTP error: 'File not found' (1)
Not retrying...
sun7i# node: cubie2          status: on
~$off
========================================================================
Board multi-beaver failure log:
    -------------------------------------------------
cpu=armv7
dnsip=172.16.1.1
ethact=asx0
fdt_addr_r=0x82000000
gatewayip=172.16.1.1
initrd_high=0xffffffff
ipaddr=172.16.1.174
kernel_addr_r=0x81000000
loadaddr=0x80408000
mmc_boot=setenv devtype mmc; if mmc dev ${devnum}; then run scan_boot; fi
netmask=255.255.255.0
ramdisk_addr_r=0x82100000
rootpart=1
scan_boot=echo Scanning ${devtype} ${devnum}...; for prefix in ${boot_prefixes}; do for script in ${boot_scripts}; do run script_boot; done; done;
script_boot=if load ${devtype} ${devnum}:${rootpart} ${scriptaddr} ${prefix}${script}; then echo ${script} found! Executing ...;source ${scriptaddr};fi;
scriptaddr=0x90000000
serverip=172.16.1.7
soc=tegra30
stderr=serial
stdin=serial
stdout=serial
usb_boot=setenv devtype usb; run usb_init; if usb dev ${devnum}; then run scan_boot; fi
usb_init=if ${usb_need_init}; then set usb_need_init false; usb start 0; fi
usbethaddr=58:6d:8f:50:ba:18
vendor=nvidia
Environment size: 1604/8188 bytes
Tegra30 (Beaver) # printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 earlyprintk debug root=/dev/mmcblk0p1 rootwait
Tegra30 (Beaver) # tftpboot 0x82000000 172.16.1.4:/srv/tftp/arm-soc/v3.12-rc5-703-g932c441/uImage.multi-2g
tftpboot 0x82000000 172.16.1.4:/srv/tftp/arm-soc/v3.12-rc5-703-g932c441/uImage.multi-2g
Using asx0 device
TFTP from server 172.16.1.4; our IP address is 172.16.1.174
Filename '/srv/tftp/arm-soc/v3.12-rc5-703-g932c441/uImage.multi-2g'.
Load address: 0x82000000
Loading: *
TFTP error: 'File not found' (1)
Not retrying...
Tegra30 (Beaver) # ~$off
========================================================================
Board multi-panda failure log:
    -------------------------------------------------
Panda # setenv autoboot no
setenv autoboot no
Panda # printenv
printenv
autoboot=no
autoload=no
baudrate=115200
bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk
bootcmd=run usb_boot ; run legacy ; run local
bootdelay=1
bootfile=arm-soc/v3.12-rc5-703-g932c441/uImage.multi-2g
console=ttyO2,115200n8
ethact=sms0
fdt_high=0xffffffff
gatewayip=172.16.1.1
hostname=panda-es
ipaddr=172.16.1.182
legacy=usb start ; bootp ; tftpboot 0x80000000 172.16.1.7:/srv/tftp/uImage.panda && bootm 0x80000000
loadaddr=0x80000000
local=mmc rescan 0 ; fatload mmc 0:1 0x80000000 uImage && bootm 0x80000000
netmask=255.255.255.0
serverip=172.16.1.7
usb_boot=usb start ; bootp ; tftpboot 0x80000000 172.16.1.7:/srv/tftp/uImage.panda && tftp 0x81000000 172.16.1.7:/srv/tftp/omap4-panda.dtb && bootm 0x80000000 - 0x81000000
usbethaddr=2E:60:67:E0:49:01
Environment size: 825/131068 bytes
Panda # printenv bootargs
printenv bootargs
bootargs=console=ttyO2,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk
Panda # tftpboot 0x80000000 172.16.1.4:/srv/tftp/arm-soc/v3.12-rc5-703-g932c441/uImage.multi-2g
tftpboot 0x80000000 172.16.1.4:/srv/tftp/arm-soc/v3.12-rc5-703-g932c441/uImage.multi-2g
Waiting for Ethernet connection... done.
Using sms0 device
TFTP from server 172.16.1.4; our IP address is 172.16.1.182
Filename '/srv/tftp/arm-soc/v3.12-rc5-703-g932c441/uImage.multi-2g'.
Load address: 0x80000000
Loading: *
TFTP error: 'File not found' (1)
Not retrying...
Panda # ~$off
========================================================================
Board multi-snowball failure log:
    -------------------------------------------------
emmcargs=setenv bootargs ${bootargs} root=/dev/mmcblk0p3 rootwait
addcons=setenv bootargs ${bootargs} console=${console}
emmcboot=echo Booting from eMMC ...; run commonargs emmcargs memargs; bootm ${loadaddr}
mmcargs=setenv bootargs ${bootargs} root=/dev/mmcblk1p2 rootwait
mmcboot=echo Booting from external MMC ...; run commonargs mmcargs memargs; bootm ${loadaddr}
ethact=smc911x-0
bootdelay=5
bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk
ethaddr=08:00:08:1e:0f:44
stdin=serial
stdout=serial
stderr=serial
board_id=1
startup_graphics=0
logo=0
crashkernel=crashkernel=1M@0x5600000
autoload=no
netmask=255.255.255.0
ipaddr=172.16.1.121
serverip=172.16.1.7
bootfile=arm-soc/v3.12-rc5-703-g932c441/uImage.multi-snowball
autoboot=no
Environment size: 1710/4092 bytes
U8500 $ printenv bootargs
printenv bootargs
bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk
U8500 $ tftpboot 0x100000 172.16.1.4:/srv/tftp/arm-soc/v3.12-rc5-703-g932c441/uImage.multi-snowball
tftpboot 0x100000 172.16.1.4:/srv/tftp/arm-soc/v3.12-rc5-703-g932c441/uImage.multi-snowball
smc911x: detected LAN9221 controller
smc911x: phy initialized
smc911x: MAC 08:00:08:1e:0f:44
Using smc911x-0 device
TFTP from server 172.16.1.4; our IP address is 172.16.1.121
Filename '/srv/tftp/arm-soc/v3.12-rc5-703-g932c441/uImage.multi-snowball'.
Load address: 0x100000
Loading: *
TFTP error: 'File not found' (1)
Not retrying...
U8500 $ ~$off
========================================================================
Board multi-trimslice failure log:
    -------------------------------------------------
*** Unhandled DHCP Option in OFFER/ACK: 28
DHCP client bound to address 172.16.1.134
TrimSlice # setenv bootfile arm-soc/v3.12-rc5-703-g932c441/uImage.multi-trimslice
setenv bootfile arm-soc/v3.12-rc5-703-g932c441/uImage.multi-trimslice
TrimSlice # setenv autoboot no
setenv autoboot no
TrimSlice # printenv
printenv
bootdelay=5
baudrate=115200
loadaddr=0x408000
stdin=serial,usbkbd
stdout=serial,lcd
stderr=serial,lcd
console=ttyS0,115200n8
ethact=RTL8169#0
gateway=172.16.1.1
bootcmd=none
bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw
autoload=no
netmask=255.255.255.0
ipaddr=172.16.1.134
serverip=172.16.1.7
bootfile=arm-soc/v3.12-rc5-703-g932c441/uImage.multi-trimslice
autoboot=no
Environment size: 380/65532 bytes
TrimSlice # printenv bootargs
printenv bootargs
bootargs=console=ttyS0,115200 root=/dev/sda1 rootwait rw
TrimSlice # tftpboot 0x800000 172.16.1.4:/srv/tftp/arm-soc/v3.12-rc5-703-g932c441/uImage.multi-trimslice
tftpboot 0x800000 172.16.1.4:/srv/tftp/arm-soc/v3.12-rc5-703-g932c441/uImage.multi-trimslice
Using RTL8169#0 device
TFTP from server 172.16.1.4; our IP address is 172.16.1.134
Filename '/srv/tftp/arm-soc/v3.12-rc5-703-g932c441/uImage.multi-trimslice'.
Load address: 0x800000
Loading: *
TFTP error: 'File not found' (1)
Not retrying...
TrimSlice # ~$off
========================================================================
Board multi-wandboard failure log:
    -------------------------------------------------
gatewayip=172.16.1.1
importbootenv=echo Importing environment from mmc (uEnv.txt)...; env import -t $loadaddr $filesize
initrd_high=0xffffffff
ip_dyn=yes
ipaddr=172.16.1.154
loadaddr=0x12000000
loadbootenv=load mmc ${mmcdev}:${mmcpart} ${loadaddr} uEnv.txt
loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};
loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} /dtbs/${fdt_file}
loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}
loadzimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} zImage
mmcargs=setenv bootargs console=${console},${baudrate} ${optargs} root=${mmcroot} rootfstype=${mmcrootfstype} video=${video}
mmcboot=echo Booting from mmc ...; run mmcargs; if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if run loadfdt; then bootz ${loadaddr} - ${fdt_addr}; else if test ${boot_fdt} = try; then bootz ${loadaddr}; else echo WARN: Cannot load the DT; fi; fi; else bootz ${loadaddr}; fi;
mmcdev=0
mmcpart=1
mmcroot=/dev/mmcblk0p2 ro
mmcrootfstype=ext4 rootwait
netargs=setenv bootargs console=${console},${baudrate} root=/dev/nfs ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp
netboot=echo Booting from net ...; run netargs; if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; ${get_cmd} zImage; if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if ${get_cmd} ${fdt_addr} ${fdt_file}; then bootz ${loadaddr} - ${fdt_addr}; else if test ${boot_fdt} = try; then bootz ${loadaddr}; else echo WARN: Cannot load the DT; fi; fi; else bootz ${loadaddr}; fi;
netmask=255.255.255.0
script=boot.scr
serverip=172.16.1.7
uimage=uImage
update_sd_firmware=if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; if mmc dev ${mmcdev}; then if ${get_cmd} ${update_sd_firmware_filename}; then setexpr fw_sz ${filesize} / 0x200; setexpr fw_sz ${fw_sz} + 1; mmc write ${loadaddr} 0x2 ${fw_sz}; fi; fi
update_sd_firmware_filename=u-boot.imx
Environment size: 2723/8188 bytes
=> printenv bootargs
printenv bootargs
bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug
=> tftpboot 0x12000000 172.16.1.4:/srv/tftp/arm-soc/v3.12-rc5-703-g932c441/uImage.multi-256m
tftpboot 0x12000000 172.16.1.4:/srv/tftp/arm-soc/v3.12-rc5-703-g932c441/uImage.multi-256m
Using FEC device
TFTP from server 172.16.1.4; our IP address is 172.16.1.154
Filename '/srv/tftp/arm-soc/v3.12-rc5-703-g932c441/uImage.multi-256m'.
Load address: 0x12000000
Loading: *
TFTP error: 'File not found' (1)
Not retrying...
=> ~$off