Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.7-rc3-70-g41ef721/

Failed boards:

arndale multi_v7_nosmp_defconfig : NO BUILD bbb multi_v7_nosmp_defconfig : NO BUILD beagleboard-x15 multi_v7_nosmp_defconfig : NO BUILD beaver arm-tegra_defconfig : FAILED 1:48.84 beaver arm-multi_v7_defconfig : FAILED 1:50.65 beaver multi_v7_nosmp_defconfig : NO BUILD capri multi_v7_nosmp_defconfig : NO BUILD colibri-vf61 multi_v7_nosmp_defconfig : NO BUILD colombus multi_v7_nosmp_defconfig : NO BUILD cosmic multi_v7_nosmp_defconfig : NO BUILD cubie multi_v7_nosmp_defconfig : NO BUILD cubie2 multi_v7_nosmp_defconfig : NO BUILD cubox multi_v7_nosmp_defconfig : NO BUILD dalmore multi_v7_nosmp_defconfig : NO BUILD hummingboard multi_v7_nosmp_defconfig : NO BUILD jetsontk1 multi_v7_nosmp_defconfig : NO BUILD minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:55.87 omap5uevm arm-omap2plus_defconfig : FAILED 2:05.83 omap5uevm arm-multi_v7_defconfig : FAILED 2:12.72 omap5uevm arm-multi_lpae_defconfig : FAILED 2:12.47 omap5uevm multi_v7_nosmp_defconfig : NO BUILD pandaes multi_v7_nosmp_defconfig : NO BUILD parallella multi_v7_nosmp_defconfig : NO BUILD pi arm-multi_v7_defconfig : FAILED 1:57.47 pi arm-multi_lpae_defconfig : FAILED 1:56.16 pi multi_v7_nosmp_defconfig : NO BUILD pit multi_v7_nosmp_defconfig : NO BUILD rk3288evb multi_v7_nosmp_defconfig : NO BUILD seaboard multi_v7_nosmp_defconfig : NO BUILD snow multi_v7_nosmp_defconfig : NO BUILD snowball multi_v7_nosmp_defconfig : NO BUILD socfpga multi_v7_nosmp_defconfig : NO BUILD trimslice multi_v7_nosmp_defconfig : NO BUILD wandboard arm-imx_v6_v7_defconfig : FAILED 2:58.02 wandboard multi_v7_nosmp_defconfig : NO BUILD

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:17.49 arndale arm-exynos_defconfig : passed 1:29.81 arndale arm-multi_v7_defconfig : passed 1:29.77 arndale arm-multi_lpae_defconfig : passed 1:29.54 bbb arm-omap2plus_defconfig : passed 1:39.39 bbb arm-multi_v7_defconfig : passed 1:17.06 beagleboard-x15 arm-omap2plus_defconfig : warnings 0:51.29 beagleboard-x15 arm-multi_v7_defconfig : warnings 0:54.51 beagleboard-x15 arm-multi_lpae_defconfig : warnings 1:00.24 capri arm-bcm_defconfig : passed 0:47.31 capri arm-multi_v7_defconfig : passed 0:51.47 chitra powerpc-pasemi_defconfig : passed 2:14.53 chitra powerpc-ppc64_defconfig : passed 2:59.03 colombus arm-sunxi_defconfig : passed 2:24.28 colombus arm-multi_v7_defconfig : passed 2:30.13 colombus arm-multi_lpae_defconfig : passed 2:32.00 cosmic arm-imx_v6_v7_defconfig : passed 3:24.38 cosmic arm-multi_v7_defconfig : passed 3:06.71 cubie arm-sunxi_defconfig : passed 0:50.34 cubie arm-multi_v7_defconfig : passed 1:00.33 cubie2 arm-sunxi_defconfig : passed 0:58.03 cubie2 arm-multi_v7_defconfig : passed 1:00.23 cubie2 arm-multi_lpae_defconfig : passed 1:02.07 cubox arm-multi_v7_defconfig : passed 1:16.19 cubox arm-mvebu_v7_defconfig : passed 1:01.19 dalmore arm-tegra_defconfig : warnings 2:28.21 dalmore arm-multi_v7_defconfig : warnings 1:32.26 dalmore arm-multi_lpae_defconfig : warnings 1:27.01 jetsontk1 arm-tegra_defconfig : warnings 0:53.41 jetsontk1 arm-multi_v7_defconfig : warnings 0:49.91 jetsontk1 arm-multi_lpae_defconfig : warnings 0:59.26 pandaes arm-omap2plus_defconfig : passed 1:44.40 pandaes arm-multi_v7_defconfig : passed 1:47.59 parallella arm-multi_v7_defconfig : passed 3:03.78 pi arm-exynos_defconfig : passed 2:17.96 pit arm-exynos_defconfig : passed 2:11.53 pit arm-multi_v7_defconfig : passed 2:27.91 pit arm-multi_lpae_defconfig : passed 2:16.30 seaboard arm-tegra_defconfig : warnings 1:08.60 seaboard arm-multi_v7_defconfig : warnings 1:05.36 seattle arm64-defconfig : passed 2:32.38 snow arm-exynos_defconfig : passed 2:14.64 snow arm-multi_v7_defconfig : passed 2:02.70 snow arm-multi_lpae_defconfig : passed 2:00.89 snowball arm-u8500_defconfig : passed 1:22.56 snowball arm-multi_v7_defconfig : passed 2:42.02 trimslice arm-tegra_defconfig : warnings 1:38.30 wandboard arm-multi_v7_defconfig : passed 1:02.72

Offline boards:

colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:20.41 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:21.83 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 2:38.17 hummingboard arm-multi_v7_defconfig : OFFLINE 2:15.72 rk3288evb arm-multi_v7_defconfig : OFFLINE 1:00.12 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:42.73 sama5 arm-sama5_defconfig : OFFLINE 2:20.12 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:19.34 socfpga arm-socfpga_defconfig : OFFLINE 2:25.81 socfpga arm-multi_v7_defconfig : OFFLINE 2:12.27 trimslice arm-multi_v7_defconfig : OFFLINE 2:26.78

Board legend is available at http://arm-soc.lixom.net/boards.html

Last entries of failed logs below:

========================================================================

Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 3.408113] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.415069] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.421588] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 3.428533] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.434118] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.441125] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.451124] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.462571] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.469195] [drm] No driver support for vblank timestamp query. [ 3.475141] drm drm: No connectors reported connected with modes [ 3.481150] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.506149] Console: switching to colour frame buffer device 128x48 [ 3.518302] drm drm: fb0: frame buffer device [ 3.533409] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.544220] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.550684] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.556095] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.563922] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.578424] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.585174] hub 1-0:1.0: USB hub found [ 3.588947] hub 1-0:1.0: 1 port detected [ 3.593879] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.599288] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.607026] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.618417] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.625085] hub 2-0:1.0: USB hub found [ 3.628852] hub 2-0:1.0: 1 port detected [ 3.639227] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.652901] vdd_sata,avdd_plle: disabling [ 3.657609] usb1_vbus: disabling [ 3.661713] Waiting for root device /dev/mmcblk0p1... [ 3.938423] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.877008] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:48]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:49]: got exception: timeout ~$off

[PYBOOT] [beaver 01:50]: Done.

========================================================================

Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------

[ 6.504199] pcie_pme 0000:00:01.0:pcie001: service driver pcie_pme loaded [ 6.511234] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.516834] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 6.524340] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 6.534341] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 6.547265] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.553885] [drm] No driver support for vblank timestamp query. [ 6.559888] drm drm: No connectors reported connected with modes [ 6.565897] [drm] Cannot find any crtc or sizes - going 1024x768 [ 6.592914] Console: switching to colour frame buffer device 128x48 [ 6.604721] drm drm: fb0: frame buffer device [ 6.631072] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 6.640354] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 6.646829] tegra-ehci 7d004000.usb: EHCI Host Controller [ 6.652262] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 6.660242] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 6.681076] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 6.688979] hub 1-0:1.0: USB hub found [ 6.692757] hub 1-0:1.0: 1 port detected [ 6.697558] tegra-ehci 7d008000.usb: EHCI Host Controller [ 6.702979] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 6.710861] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 6.731070] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 6.738848] hub 2-0:1.0: USB hub found [ 6.742622] hub 2-0:1.0: 1 port detected [ 6.752230] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 6.770258] vdd_sata,avdd_plle: disabling [ 6.774984] usb1_vbus: disabling [ 6.778392] ALSA device list: [ 6.781404] #0: NVIDIA Tegra Beaver [ 6.785606] Waiting for root device /dev/mmcblk0p1... [ 7.061077] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 8.061271] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:46]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:47]: got exception: timeout ~$off

[PYBOOT] [beaver 01:48]: Done.

========================================================================

Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------

[ 1.791159] NET: Registered protocol family 10 [ 1.796777] sit: IPv6 over IPv4 tunneling driver [ 1.797245] NET: Registered protocol family 17 [ 1.800184] NET: Registered protocol family 15 [ 1.804662] Key type dns_resolver registered [ 1.809014] Registering SWP/SWPB emulation handler [ 1.822050] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.824352] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.831797] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.838926] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.845511] [drm] No driver support for vblank timestamp query. [ 1.851412] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.857765] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.862958] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.870413] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.878873] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.888667] mmc1: new DDR MMC card at address 0001 [ 1.892119] max98090 1-0010: MAX98090 REVID=0x43 [ 1.894390] max98090 1-0010: use default 2.8v micbias [ 1.903911] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.907576] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.913699] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.913736] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.913993] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.925453] mmcblk1: p1 p2 [ 1.937276] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.973884] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:21 UTC (946688421) [ 1.994452] VDD10_HDMI_1.0V: disabling [ 1.995168] vdd_g3d: disabling [ 1.996232] BUCK8_2.8V: disabling [ 2.000256] ALSA device list: [ 2.001863] #0: Odroid-U3 [ 2.005628] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [odroidu3 01:53]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 01:54]: got exception: timeout ~$off

[PYBOOT] [odroidu3 01:55]: Done.

========================================================================

Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.978354] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.984880] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.992910] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.004024] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.012212] ldo9: bypassed regulator has no supply! [ 2.017331] ldo9: failed to get the current voltage(-517) [ 2.022994] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.037168] smsc95xx v1.0.4 [ 2.041295] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.064283] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.070694] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.098050] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 3e:f2:c1:35:42:62 [ 2.110005] smps9: Bringing 0uV into 2100000-2100000uV [ 2.129014] ldo9: bypassed regulator has no supply! [ 2.134131] ldo9: failed to get the current voltage(-517) [ 2.139797] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.153936] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.182423] smps9: Bringing 0uV into 2100000-2100000uV [ 2.201431] ldo9: bypassed regulator has no supply! [ 2.206548] ldo9: failed to get the current voltage(-517) [ 2.212215] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.226724] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:02:26 UTC (946684946) [ 2.242610] pbias_mmc_omap5: disabling [ 2.246559] vmmcsdio_fixed: disabling [ 2.251098] Waiting for root device /dev/mmcblk1p2... [ 2.363522] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.499338] hub 1-2:1.0: USB hub found [ 2.503347] hub 1-2:1.0: 3 ports detected [ 2.509289] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.537354] smps9: Bringing 0uV into 2100000-2100000uV [ 2.556409] ldo9: bypassed regulator has no supply! [ 2.561530] ldo9: failed to get the current voltage(-517) [ 2.567194] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator

[PYBOOT] [omap5uevm 02:09]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:10]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:11]: Done.

========================================================================

Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.973052] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.979592] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.987596] ldo4: Bringing 0uV into 1800000-1800000uV [ 1.998693] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.006835] ldo9: bypassed regulator has no supply! [ 2.011958] ldo9: failed to get the current voltage(-517) [ 2.017623] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.032859] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.033802] smsc95xx v1.0.4 [ 2.059276] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.065700] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.092911] smps9: Bringing 0uV into 2100000-2100000uV [ 2.098526] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, e2:42:f5:c8:8f:2b [ 2.123752] ldo9: bypassed regulator has no supply! [ 2.128876] ldo9: failed to get the current voltage(-517) [ 2.134542] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.148692] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.177404] smps9: Bringing 0uV into 2100000-2100000uV [ 2.196304] ldo9: bypassed regulator has no supply! [ 2.201423] ldo9: failed to get the current voltage(-517) [ 2.207087] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.221582] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.237435] pbias_mmc_omap5: disabling [ 2.241394] vmmcsdio_fixed: disabling [ 2.245925] Waiting for root device /dev/mmcblk1p2... [ 2.358517] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.494335] hub 1-2:1.0: USB hub found [ 2.498351] hub 1-2:1.0: 3 ports detected [ 2.504286] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.532175] smps9: Bringing 0uV into 2100000-2100000uV [ 2.550879] ldo9: bypassed regulator has no supply! [ 2.556000] ldo9: failed to get the current voltage(-517) [ 2.561674] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator

[PYBOOT] [omap5uevm 02:09]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:10]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:11]: Done.

========================================================================

Board omap5uevm-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 3.998996] ldo9: bypassed regulator has no supply! [ 4.004130] ldo9: failed to get the current voltage(-517) [ 4.009806] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.032659] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 4.040338] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 4.046888] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 4.053209] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.060078] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.069666] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.079166] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.086214] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 4.092350] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.098638] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.105503] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.115105] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.124612] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.131653] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.149936] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 4.156224] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 4.163087] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 4.172667] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 4.182160] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 4.189193] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 4.210732] smps9: Bringing 0uV into 2100000-2100000uV [ 4.239871] ldo9: bypassed regulator has no supply! [ 4.244977] ldo9: failed to get the current voltage(-517) [ 4.250663] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.270775] hctosys: unable to open rtc device (rtc0) [ 4.276070] sr_init: No PMIC hook to init smartreflex [ 4.281575] sr_init: platform driver register failed for SR [ 4.309319] pbias_mmc_omap5: disabling [ 4.313254] vmmcsdio_fixed: disabling [ 4.319409] Waiting for root device /dev/mmcblk1p2...

[PYBOOT] [omap5uevm 02:03]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:04]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:05]: Done.

========================================================================

Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.538360] isl29018 7-0044: No cache defaults, reading back from HW [ 1.544712] isl29018 7-0044: Failed to read 1: -6 [ 1.549296] isl29018 7-0044: regmap initialization fails: -6 [ 1.560183] NET: Registered protocol family 10 [ 1.564612] sit: IPv6 over IPv4 tunneling driver [ 1.568189] NET: Registered protocol family 17 [ 1.572195] can: controller area network core (rev 20120528 abi 9) [ 1.578384] NET: Registered protocol family 29 [ 1.582772] can: raw protocol (rev 20120528) [ 1.587022] can: broadcast manager protocol (rev 20120528 t) [ 1.592663] can: netlink gateway (rev 20130117) max_hops=1 [ 1.598384] Key type dns_resolver registered [ 1.602711] ThumbEE CPU extension supported. [ 1.606632] Registering SWP/SWPB emulation handler [ 1.616498] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.621974] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.628344] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.633718] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.643819] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.654158] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.659601] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.669787] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.675967] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.681345] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.691061] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.713586] Waiting for root device /dev/mmcblk0p1... [ 1.717469] mmc0: tuning execution failed: -5 [ 1.721525] mmc0: error -5 whilst initialising MMC card [ 2.583148] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597288] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.602745] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609116] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.614500] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo

[PYBOOT] [pi 01:53]: Timed out waiting for "<type 'str'>":

[PYBOOT] [pi 01:54]: got exception: timeout ~$off

[PYBOOT] [pi 01:55]: Done.

========================================================================

Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.538845] isl29018 7-0044: No cache defaults, reading back from HW [ 1.545197] isl29018 7-0044: Failed to read 1: -6 [ 1.549782] isl29018 7-0044: regmap initialization fails: -6 [ 1.560712] NET: Registered protocol family 10 [ 1.565145] sit: IPv6 over IPv4 tunneling driver [ 1.568722] NET: Registered protocol family 17 [ 1.572724] can: controller area network core (rev 20120528 abi 9) [ 1.578915] NET: Registered protocol family 29 [ 1.583302] can: raw protocol (rev 20120528) [ 1.587551] can: broadcast manager protocol (rev 20120528 t) [ 1.593193] can: netlink gateway (rev 20130117) max_hops=1 [ 1.598925] Key type dns_resolver registered [ 1.603239] ThumbEE CPU extension supported. [ 1.607162] Registering SWP/SWPB emulation handler [ 1.617090] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.622568] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.628934] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.634308] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.644416] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.654789] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.660235] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.670421] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.676602] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.681979] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.691705] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.714398] Waiting for root device /dev/mmcblk0p1... [ 1.718274] mmc0: tuning execution failed: -5 [ 1.722332] mmc0: error -5 whilst initialising MMC card [ 2.583640] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.597825] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.603284] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.609655] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.615038] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo

[PYBOOT] [pi 01:54]: Timed out waiting for "<type 'str'>":

[PYBOOT] [pi 01:55]: got exception: timeout ~$off

[PYBOOT] [pi 01:56]: Done.

========================================================================

Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

[ 20.079337] mmcblk0: error -110 sending status command, aborting INIT: INIT: cannot execute "/sb[ 20.090696] mmcblk0: error -110 sending status command, retrying in/getty"cannot execute "/sbin/ge[ 20.099524] mmcblk0: error -110 sending status command, retrying tty" INIT: Id "6" respawning t[ 20.108379] mmcblk0: error -110 sending status command, aborting oo fast: disabled for 5 minutes [ 20.119909] mmcblk0: error -110 sending status command, retrying [ 20.128356] mmcblk0: error -110 sending status command, retrying [ 20.136809] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/gett[ 20.148007] mmcblk0: error -110 sending status command, retrying y" INIT: Id "S1" respawning to[ 20.156842] mmcblk0: error -110 sending status command, retrying o fast: disabled for 5 minutes [ 20.165700] mmcblk0: error -110 sending status command, aborting [ 20.177208] mmcblk0: error -110 sending status command, retrying [ 20.185749] mmcblk0: error -110 sending status command, retrying [ 20.194187] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: Id "1" respawning too fast: disabled for 5 minutesINIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty"

INIT: Id "2" respawning too fast: disabled for 5 minutes [ 20.310389] mmcblk0: error -110 sending status command, retrying [ 20.318857] mmcblk0: error -110 sending status command, retrying [ 20.327329] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" [ 20.361835] mmcblk0: error -110 sending status command, retrying [ 20.370308] mmcblk0: error -110 sending status command, retrying [ 20.378765] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: Id "3" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 53.984603] random: nonblocking pool is initialized

[PYBOOT] [wandboard 02:55]: Timed out waiting for "<type 'str'>":

[PYBOOT] [wandboard 02:56]: got exception: timeout ~$off

[PYBOOT] [wandboard 02:57]: Done.