Failed boards:

bbb multi_v7_defconfig : FAILED 1:21.60 panda multi_v7_defconfig : FAILED 1:37.85

Successful boards:

apc vt8500_v6_v7_defconfig : passed 1:13.17 arndale exynos_defconfig : passed 1:07.95 bbb omap2plus_defconfig : passed 1:37.10 beaver tegra_defconfig : passed 0:51.15 beaver multi_v7_defconfig : passed 0:50.64 capri bcm_defconfig : passed 0:45.39 capri multi_v7_defconfig : passed 0:43.78 cubie sunxi_defconfig : passed 0:54.85 cubie multi_v7_defconfig : passed 0:58.85 cubie2 sunxi_defconfig : passed 0:52.49 cubie2 multi_v7_defconfig : passed 1:08.37 cubie2 multi_lpae_defconfig : passed 0:56.73 cubox dove_defconfig : warnings 1:08.39 dalmore tegra_defconfig : passed 1:19.94 dalmore multi_v7_defconfig : passed 1:15.28 dalmore multi_lpae_defconfig : passed 1:18.73 panda omap2plus_defconfig : passed 1:21.95 sama5 sama5_defconfig : passed 1:49.16 seaboard tegra_defconfig : passed 1:04.53 seaboard multi_v7_defconfig : passed 1:09.97 snow exynos_defconfig : passed 1:20.39 snowball u8500_defconfig : passed 2:24.41 snowball multi_v7_defconfig : passed 2:20.22 trimslice tegra_defconfig : passed 0:59.10 trimslice multi_v7_defconfig : passed 1:02.49 wandboard imx_v6_v7_defconfig : passed 0:58.27 wandboard multi_v7_defconfig : passed 1:05.85

Board legend is available at http://arm-soc.lixom.net/boards.html

Last entries of failed logs below:

========================================================================

Board bbb-multi_v7_defconfig failure log: -------------------------------------------------

TFTP from server 172.16.1.3; our IP address is 172.16.1.121 Filename 'arm-soc/v3.13-rc5-803-gdabd66e/multi_v7_defconfig/zImage'. Load address: 0x80200000 Loading: *###################################node: bbb status: on ############################## ################################################################# ################################################################# ################################################################# ##################################### 1.2 MiB/s done Bytes transferred = 4350216 (426108 hex) U-Boot# setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U-Boot# tftp 0x81f00000 arm-soc/v3.13-rc5-803-gdabd66e/multi_v7_defconfig/dtbs/am335x-boneblack.dtb tftp 0x81f00000 arm-soc/v3.13-rc5-803-gdabd66e/multi_v7_defconfig/dtbs/am335x-boneblack.dtb link up on port 0, speed 100, full duplex Using cpsw device TFTP from server 172.16.1.3; our IP address is 172.16.1.121 Filename 'arm-soc/v3.13-rc5-803-gdabd66e/multi_v7_defconfig/dtbs/am335x-boneblack.dtb'. Load address: 0x81f00000 Loading: *## 416 KiB/s done Bytes transferred = 17911 (45f7 hex) U-Boot# setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk setenv bootargs console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO0,115200 root=/dev/mmcblk0p2 rootwait rw debug earlyprintk U-Boot# bootz 0x80200000 - 0x81f00000 bootz 0x80200000 - 0x81f00000 ## Flattened Device Tree blob at 81f00000 Booting using the fdt blob at 0x81f00000 Using Device Tree in place at 81f00000, end 81f075f6

Starting kernel ...

~$off # PYBOOT: Exception: timeout

========================================================================

Board panda-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.415069] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 1.422424] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.429870] omap_hsmmc 480d5000.mmc: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_pins, deferring probe [ 1.441741] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.449401] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.456237] usbcore: registered new interface driver usbhid [ 1.462097] usbhid: USB HID core driver [ 1.469055] TCP: cubic registered [ 1.472534] NET: Registered protocol family 17 [ 1.477386] Key type dns_resolver registered [ 1.482269] Power Management for TI OMAP4+ devices. [ 1.487457] Power Management for TI OMAP4. [ 1.491729] OMAP4 PM: u-boot >= v2012.07 is required for full PM support [ 1.498870] Registering SWP/SWPB emulation handler [ 1.504791] reg-fixed-voltage wl12xx_vmmc.10: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_gpio, deferring probe [ 1.517578] platform wl12xx_vmmc.10: Driver reg-fixed-voltage requests probe deferral [ 1.525909] omap_i2c 48070000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c1_pins, deferring probe [ 1.537689] platform 48070000.i2c: Driver omap_i2c requests probe deferral [ 1.537689] omap_i2c 48072000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c2_pins, deferring probe [ 1.556732] platform 48072000.i2c: Driver omap_i2c requests probe deferral [ 1.557495] omap_i2c 48060000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c3_pins, deferring probe [ 1.575744] platform 48060000.i2c: Driver omap_i2c requests probe deferral [ 1.575744] omap_i2c 48350000.i2c: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_i2c4_pins, deferring probe [ 1.594757] platform 48350000.i2c: Driver omap_i2c requests probe deferral [ 1.602569] omap-dma-engine 4a056000.dma-controller: allocating channel for 62 [ 1.610137] omap-dma-engine 4a056000.dma-controller: allocating channel for 61 [ 1.617767] omap_hsmmc 4809c000.mmc: vmmc regulator missing [ 1.623657] omap-dma-engine 4a056000.dma-controller: freeing channel for 61 [ 1.630981] omap-dma-engine 4a056000.dma-controller: freeing channel for 62 [ 1.638305] platform 4809c000.mmc: Driver omap_hsmmc requests probe deferral [ 1.646026] omap_hsmmc 480d5000.mmc: could not find pctldev for node /ocp/pinmux@4a100040/pinmux_wl12xx_pins, deferring probe [ 1.657897] platform 480d5000.mmc: Driver omap_hsmmc requests probe deferral [ 1.665618] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.674407] spear_cpufreq: Invalid cpufreq_tbl [ 1.679016] ALSA device list: [ 1.679107] No soundcards found. [ 1.686035] omap_uart 48020000.serial: no wakeirq for uart2 [ 1.692321] Waiting for root device /dev/mmcblk0p2... ~$off # PYBOOT: Exception: timeout