Full logs are available at http://arm-soc.lixom.net/bootlogs/stable-rc/v4.8.10-68-g5b1cb43/

Failed boards:

arndale arm-multi_v7_nosmp_defconfig : FAILED 23:38.19 chitra powerpc-ppc64_defconfig : FAILED 3:31.44 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:25.45 omap5uevm arm-multi_v7_defconfig : FAILED 2:14.45 pi arm-multi_lpae_defconfig : FAILED 3:32.88 pi arm-multi_v7_nosmp_defconfig : FAILED 1:49.50 wandboard arm-imx_v6_v7_defconfig : FAILED 3:01.76

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:24.54 arndale arm-exynos_defconfig : passed 1:33.05 arndale arm-multi_lpae_defconfig : passed 1:39.76 bbb arm-omap2plus_defconfig : passed 1:45.43 bbb arm-multi_v7_defconfig : passed 1:34.55 bbb arm-multi_v7_nosmp_defconfig : passed 2:53.31 beagleboard-x15 arm-omap2plus_defconfig : passed 0:59.01 beagleboard-x15 arm-multi_v7_defconfig : passed 0:47.36 beagleboard-x15 arm-multi_lpae_defconfig : passed 0:46.68 beagleboard-x15 arm-multi_v7_nosmp_defconfig : warnings 1:00.68 beaver arm-tegra_defconfig : passed 1:40.42 beaver arm-multi_v7_defconfig : passed 1:36.38 capri arm-multi_v7_defconfig : passed 1:07.87 chitra powerpc-pasemi_defconfig : passed 1:56.51 colombus arm-sunxi_defconfig : passed 2:11.81 colombus arm-multi_v7_defconfig : passed 2:44.31 colombus arm-multi_lpae_defconfig : passed 2:34.38 cosmic arm-imx_v6_v7_defconfig : passed 3:21.04 cosmic arm-multi_v7_defconfig : passed 3:21.97 cosmic arm-multi_v7_nosmp_defconfig : passed 3:14.77 cubie arm-sunxi_defconfig : passed 0:54.53 cubie arm-multi_v7_defconfig : passed 0:55.68 cubie2 arm-sunxi_defconfig : passed 0:51.66 cubie2 arm-multi_v7_defconfig : passed 1:04.97 cubie2 arm-multi_v7_nosmp_defconfig : warnings 1:16.18 cubox arm-multi_v7_defconfig : passed 1:34.74 cubox arm-mvebu_v7_defconfig : passed 1:17.77 jetsontk1 arm-tegra_defconfig : passed 0:48.89 jetsontk1 arm-multi_v7_defconfig : passed 0:48.08 jetsontk1 arm-multi_lpae_defconfig : passed 1:00.69 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:05.75 jetsontx1 arm64-defconfig : passed 3:40.23 jetsontx1 arm64-nosmp_defconfig : passed 2:09.46 odroidu3 arm-exynos_defconfig : passed 2:29.27 odroidu3 arm-multi_v7_defconfig : passed 2:16.56 omap5uevm arm-omap2plus_defconfig : passed 1:07.29 omap5uevm arm-multi_v7_nosmp_defconfig : warnings 2:23.74 pandaes arm-omap2plus_defconfig : warnings 1:36.86 pandaes arm-multi_v7_defconfig : passed 1:40.52 pandaes arm-multi_v7_nosmp_defconfig : warnings 2:05.70 parallella arm-multi_v7_nosmp_defconfig : warnings 3:03.91 pi arm-exynos_defconfig : passed 2:13.06 pi arm-multi_v7_defconfig : passed 4:01.80 pit arm-exynos_defconfig : passed 2:12.60 pit arm-multi_v7_defconfig : passed 2:20.71 pit arm-multi_lpae_defconfig : passed 2:36.32 pit arm-multi_v7_nosmp_defconfig : warnings 3:21.51 seaboard arm-tegra_defconfig : passed 1:04.83 seaboard arm-multi_v7_nosmp_defconfig : warnings 1:35.23 seattle arm64-nosmp_defconfig : warnings 2:46.11 snowball arm-u8500_defconfig : passed 2:05.80 trimslice arm-multi_v7_defconfig : passed 4:40.37 trimslice arm-multi_v7_nosmp_defconfig : warnings 2:45.39 wandboard arm-multi_v7_defconfig : passed 2:18.89 wandboard arm-multi_v7_nosmp_defconfig : warnings 2:27.39

Offline boards:

arndale arm-multi_v7_defconfig : OFFLINE 2:08.61 beaver arm-multi_v7_nosmp_defconfig : OFFLINE 2:58.49 capri arm-multi_v7_nosmp_defconfig : OFFLINE 2:13.51 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:17.71 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:18.30 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 1:43.54 cubie arm-multi_v7_nosmp_defconfig : OFFLINE 2:27.53 cubie2 arm-multi_lpae_defconfig : OFFLINE 2:28.45 cubox arm-multi_v7_nosmp_defconfig : OFFLINE 2:19.40 dalmore arm-tegra_defconfig : OFFLINE 2:24.72 dalmore arm-multi_v7_defconfig : OFFLINE 5:25.50 dalmore arm-multi_lpae_defconfig : OFFLINE 2:25.04 dalmore arm-multi_v7_nosmp_defconfig : OFFLINE 2:22.92 hummingboard arm-imx_v6_v7_defconfig : OFFLINE 3:17.53 hummingboard arm-multi_v7_defconfig : OFFLINE 2:48.85 hummingboard arm-multi_v7_nosmp_defconfig : OFFLINE 2:29.17 minnowmax x86-minnowmax_defconfig : OFFLINE 2:48.02 omap5uevm arm-multi_lpae_defconfig : OFFLINE 2:07.23 parallella arm-multi_v7_defconfig : OFFLINE 2:09.86 rk3288evb arm-multi_v7_defconfig : OFFLINE 2:23.79 rk3288evb arm-multi_lpae_defconfig : OFFLINE 1:05.51 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:56.85 sama5 arm-sama5_defconfig : OFFLINE 2:28.79 sama5d3-xplained arm-sama5_defconfig : OFFLINE 4:18.42 seaboard arm-multi_v7_defconfig : OFFLINE 2:37.00 seattle arm64-defconfig : OFFLINE 2:32.13 snow arm-exynos_defconfig : OFFLINE 3:08.00 snow arm-multi_v7_defconfig : OFFLINE 3:15.56 snow arm-multi_lpae_defconfig : OFFLINE 2:24.78 snow arm-multi_v7_nosmp_defconfig : OFFLINE 2:17.97 snowball arm-multi_v7_defconfig : OFFLINE 5:36.21 snowball arm-multi_v7_nosmp_defconfig : OFFLINE 2:24.94 socfpga arm-socfpga_defconfig : OFFLINE 4:45.44 socfpga arm-multi_v7_defconfig : OFFLINE 3:32.27 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:24.20 trimslice arm-tegra_defconfig : OFFLINE 3:35.00

Board legend is available at http://arm-soc.lixom.net/boards.html

Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.664138] usbcore: registered new interface driver zaurus [ 1.669707] usbcore: registered new interface driver cdc_ncm [ 1.675806] exynos-dwc3 soc:usb_dwc3: no suspend clk specified [ 1.681144] soc:usb_dwc3 supply vdd33 not found, using dummy regulator [ 1.687662] soc:usb_dwc3 supply vdd10 not found, using dummy regulator [ 1.697167] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.702229] ehci-pci: EHCI PCI platform driver [ 1.706671] ehci-platform: EHCI generic platform driver [ 1.711992] ehci-orion: EHCI orion driver [ 1.715929] SPEAr-ehci: EHCI SPEAr driver [ 1.719925] ehci-st: EHCI STMicroelectronics driver [ 1.724785] ehci-exynos: EHCI EXYNOS driver [ 1.729035] ehci-atmel: EHCI Atmel driver [ 1.732944] tegra-ehci: Tegra EHCI driver [ 1.736950] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.743024] ohci-pci: OHCI PCI platform driver [ 1.747472] ohci-platform: OHCI generic platform driver [ 1.752751] ohci-omap3: OHCI OMAP3 driver [ 1.756725] SPEAr-ohci: OHCI SPEAr driver [ 1.760721] ohci-st: OHCI STMicroelectronics driver [ 1.765581] ohci-atmel: OHCI Atmel driver [ 1.769851] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 1.774972] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 1 [ 1.782803] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.791296] xhci-hcd xhci-hcd.2.auto: irq 140, io mem 0x12000000 [ 1.797697] hub 1-0:1.0: USB hub found [ 1.801018] hub 1-0:1.0: 1 port detected [ 1.805093] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 1.810381] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 2 [ 1.818052] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.826456] hub 2-0:1.0: USB hub found [ 1.829832] hub 2-0:1.0: 1 port detected [ 1.834109] usbcore: registered new interface driver usb-storage [ 1.840677] mousedev: PS/2 mouse device common for all mice [ 1.847215] i2c /dev entries driver [ 1.853925] exynos-tmu [PYBOOT] [arndale 23:31]: got exception: maximum recursion depth exceeded ~$off

[PYBOOT] [arndale 23:32]: Done. Board chitra-powerpc-ppc64_defconfig failure log: -------------------------------------------------

PID hash table entries: 4096 (order: 3, 32768 bytes) Sorting __ex_table... Memory: 4023680K/4194304K available (10016K kernel code, 1744K rwdata, 3432K rodata, 4204K init, 1027K bss, 170624K reserved, 0K cma-reserved) SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. Build-time adjustment of leaf fanout to 64. RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2 NR_IRQS:512 nr_irqs:512 16 OpenPIC addr: fc000000 mpic: Setting up MPIC "PASEMI-OPIC" version 1.3 at fc000000, max 2 CPUs mpic: ISU size: 1024, shift: 10, mask: 3ff mpic: Initializing for 1024 sources time_init: decrementer frequency = 66.666666 MHz time_init: processor frequency = 2000.000000 MHz clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0xf6018975a, max_idle_ns: 440795204712 ns clocksource: timebase mult[f000003] shift[24] registered clockevent: decrementer mult[1111110e] shift[32] cpu[0] Console: colour dummy device 80x25 pid_max: default: 32768 minimum: 301 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) mpic: requesting IPIs... Brought up 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns kworker/u4:0 (22) used greatest stack depth: 12992 bytes left NET: Registered protocol family 16 eeh_init: Platform EEH operation not found IBM eBus Device Driver cpuidle: using governor menu kworker/u4:0 (39) used greatest stack de [PYBOOT] [chitra 03:28]: Timed out waiting for "<type 'str'>":

[PYBOOT] [chitra 03:29]: got exception: timeout ~$off

[PYBOOT] [chitra 03:30]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[?25l[?1c7[ ok 8[?25h[?0c. [....] Synthesizing the initial hotplug events...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 44.967745] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 44.982182] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

[ 93.193728] eth0: device MAC address ba:8c:06:f5:2d:42 [ 93.231691] RX IPC Checksum Offload disabled [ 93.236307] No MAC Management Counters available [ 93.242096] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/ba:8c:06:f5:2d:42 Sending on LPF/eth0/ba:8c:06:f5:2d:42 Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 18 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 No DHCPOFFERS received. No working leases in persistent database - sleeping.

[PYBOOT] [colombus 03:22]: Timed out waiting for "<type 'str'>":

[PYBOOT] [colombus 03:23]: got exception: timeout ~$off

[PYBOOT] [colombus 03:24]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 56.683793] omap_i2c 48070000.i2c: controller timed out [ 57.723792] omap_i2c 48070000.i2c: controller timed out [ 58.763793] omap_i2c 48070000.i2c: controller timed out [ 58.783797] cpu cpu0: _set_opp_voltage: failed to set voltage (1060000 1060000 1060000 mV): -110 [ 59.843785] omap_i2c 48070000.i2c: controller timed out [ 60.883785] omap_i2c 48070000.i2c: controller timed out [ 61.923785] omap_i2c 48070000.i2c: controller timed out [ 62.963785] omap_i2c 48070000.i2c: controller timed out [ 62.983789] cpu cpu0: _set_opp_voltage: failed to set voltage (1250000 1250000 1250000 mV): -110 [ 62.992995] cpufreq: __target_index: Failed to change cpu frequency: -110 [ 64.043793] omap_i2c 48070000.i2c: controller timed out [ 65.083792] omap_i2c 48070000.i2c: controller timed out [ 66.123792] omap_i2c 48070000.i2c: controller timed out [ 67.163792] omap_i2c 48070000.i2c: controller timed out [ 67.183797] cpu cpu0: _set_opp_voltage: failed to set voltage (1060000 1060000 1060000 mV): -110 [ 68.243785] omap_i2c 48070000.i2c: controller timed out [ 69.283785] omap_i2c 48070000.i2c: controller timed out [ 70.323785] omap_i2c 48070000.i2c: controller timed out [ 71.363785] omap_i2c 48070000.i2c: controller timed out [ 71.383788] cpu cpu0: _set_opp_voltage: failed to set voltage (1250000 1250000 1250000 mV): -110 [ 71.392991] cpufreq: __target_index: Failed to change cpu frequency: -110 [ 72.443792] omap_i2c 48070000.i2c: controller timed out [ 73.483792] omap_i2c 48070000.i2c: controller timed out [ 74.523792] omap_i2c 48070000.i2c: controller timed out [ 75.563792] omap_i2c 48070000.i2c: controller timed out [ 75.583797] cpu cpu0: _set_opp_voltage: failed to set voltage (1060000 1060000 1060000 mV): -110 [ 76.643785] omap_i2c 48070000.i2c: controller timed out [ 77.683785] omap_i2c 48070000.i2c: controller timed out [ 78.723785] omap_i2c 48070000.i2c: controller timed out [ 79.763785] omap_i2c 48070000.i2c: controller timed out [ 79.783788] cpu cpu0: _set_opp_voltage: failed to set voltage (1250000 1250000 1250000 mV): -110 [ 79.792998] cpufreq: __target_index: Failed to change cpu frequency: -110

[PYBOOT] [omap5uevm 02:11]: Timed out waiting for "<type 'str'>": [ 80.843792] omap_i2c 48070000.i2c: controller timed out

[PYBOOT] [omap5uevm 02:12]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:14]: Done. Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.560260] can: controller area network core (rev 20120528 abi 9) [ 1.566450] NET: Registered protocol family 29 [ 1.570817] can: raw protocol (rev 20120528) [ 1.575087] can: broadcast manager protocol (rev 20160617 t) [ 1.580728] can: netlink gateway (rev 20130117) max_hops=1 [ 1.586471] Key type dns_resolver registered [ 1.590774] ThumbEE CPU extension supported. [ 1.594698] Registering SWP/SWPB emulation handler [ 1.608338] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.613846] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.620178] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.625557] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 79,64 bit host data width,64 deep fifo [ 1.635655] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.641587] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.659580] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.665222] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.671445] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.676794] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 79,64 bit host data width,64 deep fifo [ 1.686532] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.708809] mmc0: tuning execution failed: -5 [ 1.711727] mmc0: error -5 whilst initialising MMC card [ 1.717074] Waiting for root device /dev/mmcblk0p1... [ 2.598073] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.615996] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.621455] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.627829] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.633214] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 79,64 bit host data width,64 deep fifo [ 5.282347] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330 [ 5.287496] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6 [ 5.303430] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 5.308871] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 5.315266] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 5.320653] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 79,64 bit host data width,64 deep fifo

[PYBOOT] [pi 03:29]: Timed out waiting for "<type 'str'>":

[PYBOOT] [pi 03:30]: got exception: timeout ~$off

[PYBOOT] [pi 03:32]: Done. Board pi-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.496626] can: controller area network core (rev 20120528 abi 9) [ 1.502800] NET: Registered protocol family 29 [ 1.507205] can: raw protocol (rev 20120528) [ 1.511441] can: broadcast manager protocol (rev 20160617 t) [ 1.517096] can: netlink gateway (rev 20130117) max_hops=1 [ 1.522686] Key type dns_resolver registered [ 1.527147] ThumbEE CPU extension supported. [ 1.534818] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.540272] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.546653] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.552029] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 79,64 bit host data width,64 deep fifo [ 1.561806] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.568036] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.581242] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.586921] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.593071] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.598445] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 79,64 bit host data width,64 deep fifo [ 1.608011] mmc0: tuning execution failed: -5 [ 1.612071] mmc0: error -5 whilst initialising MMC card [ 1.617276] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.630093] Waiting for root device /dev/mmcblk0p1... [ 1.634757] Power domain power-domain@10044000 disable failed [ 2.513118] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.525997] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.531444] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.537827] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.543207] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 79,64 bit host data width,64 deep fifo [ 5.282086] dma-pl330 3880000.adma: Loaded driver for PL330 DMAC-241330 [ 5.287227] dma-pl330 3880000.adma: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6 [ 5.298451] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 5.303878] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 5.310278] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 5.315657] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 79,64 bit host data width,64 deep fifo

[PYBOOT] [pi 01:46]: Timed out waiting for "<type 'str'>":

[PYBOOT] [pi 01:47]: got exception: timeout ~$off

[PYBOOT] [pi 01:48]: Done. Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

respawning too fast: disabled for 5 minutes INIT: INIT: cann[ 22.763332] mmcblk0: error -110 sending status command, retrying ot execute "/sbin/getty" cannot[ 22.772068] mmcblk0: error -110 sending status command, retrying execute "/sbin/getty" [ 22.780896] mmcblk0: error -110 sending status command, aborting [ 22.791995] mmcblk0: error -110 sending status command, retrying [ 22.800450] mmcblk0: error -110 sending status command, retrying [ 22.808904] mmcblk0: error -110 sending status command, aborting [ 22.819966] mmcblk0: error -110 sending status command, retrying [ 22.828420] mmcblk0: error -110 sending status command, retrying [ 22.836861] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/gett[ 22.848067] mmcblk0: error -110 sending status command, retrying y" INIT: Id "3" respawning too[ 22.856864] mmcblk0: error -110 sending status command, retrying fast: disabled for 5 minutes [ 22.865724] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: cannot execute "/sbin[ 22.882807] mmcblk0: error -110 sending status command, retrying /getty" INIT: Id "6" respawnin[ 22.891645] mmcblk0: error -110 sending status command, retrying g too fast: disabled for 5 minute[ 22.900513] mmcblk0: error -110 sending status command, aborting s INIT: Id "S1" respawning too fast: disabled for 5 minutes INIT: cannot execute "/sbin/getty" [ 22.951914] mmcblk0: error -110 sending status command, retrying [ 22.960372] mmcblk0: error -110 sending status command, retrying [ 22.968836] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: Id "5" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 86.073911] random: crng init done

[PYBOOT] [wandboard 02:59]: Timed out waiting for "<type 'str'>":

[PYBOOT] [wandboard 03:00]: got exception: timeout ~$off

[PYBOOT] [wandboard 03:01]: Done.