Full logs are available at http://arm-soc.lixom.net/bootlogs/stable-rc/v4.4.31/

Failed boards:

arndale arm-multi_v7_nosmp_defconfig : FAILED 2:36.98 bbb arm-omap2plus_defconfig : FAILED 1:53.40 bbb arm-multi_v7_defconfig : FAILED 1:53.55 bbb arm-multi_v7_nosmp_defconfig : FAILED 2:23.52 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:46.52 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:43.20 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:48.91 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 2:14.29 beaver arm-tegra_defconfig : FAILED 1:43.59 beaver arm-multi_v7_defconfig : FAILED 1:46.19 beaver arm-multi_v7_nosmp_defconfig : FAILED 1:58.76 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:23.11 dalmore arm-tegra_defconfig : FAILED 1:49.01 dalmore arm-multi_v7_defconfig : FAILED 1:53.65 dalmore arm-multi_lpae_defconfig : FAILED 2:07.51 dalmore arm-multi_v7_nosmp_defconfig : FAILED 2:04.77 hummingboard arm-imx_v6_v7_defconfig : FAILED 1:50.63 hummingboard arm-multi_v7_defconfig : FAILED 1:57.62 hummingboard arm-multi_v7_nosmp_defconfig : FAILED 1:56.19 jetsontx1 arm64-defconfig : NO DTB jetsontx1 arm64-nosmp_defconfig : NO DTB odroidu3 arm-exynos_defconfig : FAILED 1:49.37 odroidu3 arm-multi_v7_defconfig : FAILED 2:04.91 seaboard arm-tegra_defconfig : FAILED 1:51.03 seaboard arm-multi_v7_defconfig : FAILED 2:14.02 seaboard arm-multi_v7_nosmp_defconfig : FAILED 1:51.01 snowball arm-u8500_defconfig : FAILED 1:59.16 snowball arm-multi_v7_defconfig : FAILED 2:30.65 snowball arm-multi_v7_nosmp_defconfig : FAILED 2:06.11

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:15.65 arndale arm-exynos_defconfig : warnings 1:28.28 arndale arm-multi_v7_defconfig : passed 1:26.53 arndale arm-multi_lpae_defconfig : passed 1:50.43 capri arm-multi_v7_defconfig : passed 0:49.54 capri arm-multi_v7_nosmp_defconfig : warnings 0:59.49 chitra powerpc-pasemi_defconfig : passed 2:51.49 chitra powerpc-ppc64_defconfig : passed 3:03.68 colombus arm-sunxi_defconfig : passed 2:01.19 colombus arm-multi_v7_defconfig : passed 2:38.56 colombus arm-multi_lpae_defconfig : passed 2:12.93 cosmic arm-imx_v6_v7_defconfig : passed 3:24.98 cosmic arm-multi_v7_defconfig : passed 3:09.46 cosmic arm-multi_v7_nosmp_defconfig : passed 2:53.99 cubie2 arm-sunxi_defconfig : passed 0:56.91 cubie2 arm-multi_v7_defconfig : passed 1:11.33 cubie2 arm-multi_lpae_defconfig : passed 1:57.67 cubie2 arm-multi_v7_nosmp_defconfig : warnings 1:05.03 cubox arm-multi_v7_defconfig : passed 1:06.66 cubox arm-mvebu_v7_defconfig : passed 1:42.99 cubox arm-multi_v7_nosmp_defconfig : passed 1:19.61 jetsontk1 arm-tegra_defconfig : passed 1:35.42 jetsontk1 arm-multi_v7_defconfig : passed 1:32.18 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:35.48 minnowmax x86-minnowmax_defconfig : passed 2:37.39 omap5uevm arm-omap2plus_defconfig : passed 1:03.00 omap5uevm arm-multi_v7_defconfig : passed 1:19.06 omap5uevm arm-multi_lpae_defconfig : passed 1:14.79 omap5uevm arm-multi_v7_nosmp_defconfig : warnings 1:47.73 pandaes arm-omap2plus_defconfig : warnings 1:49.34 pandaes arm-multi_v7_defconfig : passed 1:39.94 pandaes arm-multi_v7_nosmp_defconfig : warnings 2:10.56 parallella arm-multi_v7_defconfig : passed 3:05.39 parallella arm-multi_v7_nosmp_defconfig : warnings 2:49.86 pi arm-exynos_defconfig : passed 1:58.36 pi arm-multi_v7_defconfig : passed 1:38.58 pi arm-multi_lpae_defconfig : passed 2:31.79 pi arm-multi_v7_nosmp_defconfig : warnings 1:45.09 pit arm-exynos_defconfig : passed 1:32.42 pit arm-multi_v7_defconfig : passed 1:33.70 pit arm-multi_lpae_defconfig : passed 3:34.56 pit arm-multi_v7_nosmp_defconfig : warnings 1:48.03 seattle arm64-defconfig : passed 3:20.54 seattle arm64-nosmp_defconfig : passed 2:07.78 snow arm-exynos_defconfig : passed 1:16.77 snow arm-multi_v7_defconfig : passed 1:27.00 snow arm-multi_v7_nosmp_defconfig : warnings 2:02.03 socfpga arm-socfpga_defconfig : passed 1:22.71 socfpga arm-multi_v7_defconfig : passed 1:23.52 socfpga arm-multi_v7_nosmp_defconfig : warnings 1:34.82 trimslice arm-tegra_defconfig : passed 1:32.19 trimslice arm-multi_v7_nosmp_defconfig : warnings 2:41.10 wandboard arm-imx_v6_v7_defconfig : passed 1:13.44 wandboard arm-multi_v7_defconfig : passed 1:07.90 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:26.23

Offline boards:

colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:19.04 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:18.83 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 3:15.44 cubie arm-sunxi_defconfig : OFFLINE 2:15.42 cubie arm-multi_v7_defconfig : OFFLINE 2:31.35 cubie arm-multi_v7_nosmp_defconfig : OFFLINE 2:33.01 jetsontk1 arm-multi_lpae_defconfig : OFFLINE 3:51.43 rk3288evb arm-multi_v7_defconfig : OFFLINE 2:10.58 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:49.69 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:44.22 sama5 arm-sama5_defconfig : OFFLINE 2:20.06 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:48.22 snow arm-multi_lpae_defconfig : OFFLINE 2:01.07 trimslice arm-multi_v7_defconfig : OFFLINE 4:20.76

Board legend is available at http://arm-soc.lixom.net/boards.html

Last entries of failed logs below:

========================================================================

Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 2.116453] dwmmc_exynos 12220000.mmc: No vqmmc regulator found [ 2.149297] dwmmc_exynos 12220000.mmc: 1 slots initialized [ 2.153798] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.160040] ledtrig-cpu: registered to indicate activity on CPUs [ 2.165047] usbcore: registered new interface driver usbhid [ 2.170490] usbhid: USB HID core driver [ 2.176603] NET: Registered protocol family 10 [ 2.179989] sit: IPv6 over IPv4 tunneling driver [ 2.184472] NET: Registered protocol family 17 [ 2.188598] can: controller area network core (rev 20120528 abi 9) [ 2.194791] NET: Registered protocol family 29 [ 2.199185] can: raw protocol (rev 20120528) [ 2.203445] can: broadcast manager protocol (rev 20120528 t) [ 2.209087] can: netlink gateway (rev 20130117) max_hops=1 [ 2.214749] Key type dns_resolver registered [ 2.219067] ThumbEE CPU extension supported. [ 2.224071] ahci 122f0000.sata: couldn't get PHY in node sata: -517 [ 2.230527] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.236164] hctosys: unable to open rtc device (rtc0) [ 2.244605] MAIN_DC: disabling [ 2.246182] hdmi-en: disabling [ 2.249601] ahci 122f0000.sata: couldn't get PHY in node sata: -517 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.4.31 (build@brutus) (gcc version 4.9.2 (GCC) ) #1 Thu Nov 10 10:20:40 PST 2016 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c53c7d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Insignal Arndale evaluation board based on EXYNOS5250 [ 0.000000] cma: Reserved 64 MiB at 0xbc000000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Samsung CPU ID: 0x43520010 [ 0.000000] On node 0 totalpages: 520192 [ 0.000000] free_area_init_node: node 0, pgdat c0f70968, node_mem_map eeff7000 [ 0.000000] DMA zone: 1536 pages used for memmap

[PYBOOT] [arndale 02:34]: Timed out waiting for "<type 'str'>":

[PYBOOT] [arndale 02:35]: got exception: timeout ~$off

[PYBOOT] [arndale 02:36]: Done.

========================================================================

Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.529781] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.596282] Synopsys Designware Multimedia Card Interface Driver [ 1.604074] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.613659] ledtrig-cpu: registered to indicate activity on CPUs [ 1.620497] usbcore: registered new interface driver usbhid [ 1.626395] usbhid: USB HID core driver [ 1.637077] NET: Registered protocol family 10 [ 1.643557] sit: IPv6 over IPv4 tunneling driver [ 1.649707] NET: Registered protocol family 17 [ 1.654470] can: controller area network core (rev 20120528 abi 9) [ 1.661113] NET: Registered protocol family 29 [ 1.665835] can: raw protocol (rev 20120528) [ 1.670355] can: broadcast manager protocol (rev 20120528 t) [ 1.676351] can: netlink gateway (rev 20130117) max_hops=1 [ 1.683040] Key type dns_resolver registered [ 1.687909] omap_voltage_late_init: Voltage driver support not added [ 1.696045] ThumbEE CPU extension supported. [ 1.700655] Registering SWP/SWPB emulation handler [ 1.714685] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.722446] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.730863] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.738533] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.746132] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.753691] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.761010] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.769193] hctosys: unable to open rtc device (rtc0) [ 1.783951] Waiting for root device /dev/mmcblk1p2... [ 1.818296] mmc1: MAN_BKOPS_EN bit is not set [ 1.824828] mmc1: new high speed MMC card at address 0001 [ 1.831494] mmcblk0: mmc1:0001 MMC02G 1.79 GiB [ 1.836699] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.843291] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.851814] mmcblk0: p1 p2

[PYBOOT] [bbb 01:50]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:51]: got exception: timeout ~$off

[PYBOOT] [bbb 01:52]: Done.

========================================================================

Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.344948] sdhci: Copyright(c) Pierre Ossman [ 1.350692] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.413972] Synopsys Designware Multimedia Card Interface Driver [ 1.421470] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.430496] ledtrig-cpu: registered to indicate activity on CPUs [ 1.437208] usbcore: registered new interface driver usbhid [ 1.443088] usbhid: USB HID core driver [ 1.452391] NET: Registered protocol family 10 [ 1.458883] sit: IPv6 over IPv4 tunneling driver [ 1.464818] NET: Registered protocol family 17 [ 1.469554] can: controller area network core (rev 20120528 abi 9) [ 1.476147] NET: Registered protocol family 29 [ 1.480842] can: raw protocol (rev 20120528) [ 1.485355] can: broadcast manager protocol (rev 20120528 t) [ 1.491332] can: netlink gateway (rev 20130117) max_hops=1 [ 1.497949] Key type dns_resolver registered [ 1.502726] omap_voltage_late_init: Voltage driver support not added [ 1.510562] ThumbEE CPU extension supported. [ 1.522789] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.530411] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.538193] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.545720] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.553211] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.560688] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.567962] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.575545] hctosys: unable to open rtc device (rtc0) [ 1.586474] Waiting for root device /dev/mmcblk1p2... [ 1.621043] mmc1: MAN_BKOPS_EN bit is not set [ 1.627422] mmc1: new high speed MMC card at address 0001 [ 1.633863] mmcblk0: mmc1:0001 MMC02G 1.79 GiB [ 1.638928] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.645403] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.653653] mmcblk0: p1 p2

[PYBOOT] [bbb 02:20]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 02:21]: got exception: timeout ~$off

[PYBOOT] [bbb 02:23]: Done.

========================================================================

Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.058486] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.064812] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.071685] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.081275] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.090772] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.097787] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.141377] ledtrig-cpu: registered to indicate activity on CPUs [ 2.149537] oprofile: using arm/armv7 [ 2.154741] Initializing XFRM netlink socket [ 2.159816] NET: Registered protocol family 10 [ 2.170283] sit: IPv6 over IPv4 tunneling driver [ 2.179060] NET: Registered protocol family 17 [ 2.183987] NET: Registered protocol family 15 [ 2.189272] Key type dns_resolver registered [ 2.194217] omap_voltage_late_init: Voltage driver support not added [ 2.200955] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.209417] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.219691] ThumbEE CPU extension supported. [ 2.224349] Registering SWP/SWPB emulation handler [ 2.229387] SmartReflex Class3 initialized [ 2.286306] mmc1: MAN_BKOPS_EN bit is not set [ 2.296254] mmc1: new high speed MMC card at address 0001 [ 2.307838] mmcblk0: mmc1:0001 MMC02G 1.79 GiB [ 2.318202] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.328936] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.344872] mmcblk0: p1 p2 [ 2.368068] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.375413] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.388037] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.396358] hctosys: unable to open rtc device (rtc0) [ 2.401796] sr_init: No PMIC hook to init smartreflex [ 2.407442] sr_init: platform driver register failed for SR [ 2.452469] Waiting for root device /dev/mmcblk1p2...

[PYBOOT] [bbb 01:50]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:51]: got exception: timeout ~$off

[PYBOOT] [bbb 01:52]: Done.

========================================================================

Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.571646] NET: Registered protocol family 10 [ 1.576905] sit: IPv6 over IPv4 tunneling driver [ 1.582184] NET: Registered protocol family 17 [ 1.586847] can: controller area network core (rev 20120528 abi 9) [ 1.593357] NET: Registered protocol family 29 [ 1.598010] can: raw protocol (rev 20120528) [ 1.602479] can: broadcast manager protocol (rev 20120528 t) [ 1.608399] can: netlink gateway (rev 20130117) max_hops=1 [ 1.614437] Key type dns_resolver registered [ 1.618985] omap_voltage_late_init: Voltage driver support not added [ 1.626123] Power Management for TI OMAP4+ devices. [ 1.631425] ThumbEE CPU extension supported. [ 1.635915] Registering SWP/SWPB emulation handler [ 1.642724] palmas 0-0058: Irq flag is 0x00000008 [ 1.667355] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.698952] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.713092] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.735610] rtc-ds1307 2-006f: SET TIME! [ 1.741333] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.748095] rtc-ds1307 2-006f: 64 bytes nvram [ 1.752699] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.761507] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.796090] vdd_3v3: supplied by regen1 [ 1.837014] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.854213] aic_dvdd_fixed: disabling [ 1.858226] ldousb: disabling [ 1.862265] Waiting for root device /dev/mmcblk1p1... [ 1.869716] mmc1: MAN_BKOPS_EN bit is not set [ 1.881713] mmc1: new high speed MMC card at address 0001 [ 1.887694] mmcblk0: mmc1:0001 S10004 3.56 GiB [ 1.892585] mmcblk0boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.898936] mmcblk0boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.905804] mmcblk0: p1

[PYBOOT] [beagleboard-x15 01:45]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:46]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:48]: Done.

========================================================================

Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.571615] NET: Registered protocol family 10 [ 1.576886] sit: IPv6 over IPv4 tunneling driver [ 1.582161] NET: Registered protocol family 17 [ 1.586827] can: controller area network core (rev 20120528 abi 9) [ 1.593334] NET: Registered protocol family 29 [ 1.597985] can: raw protocol (rev 20120528) [ 1.602454] can: broadcast manager protocol (rev 20120528 t) [ 1.608385] can: netlink gateway (rev 20130117) max_hops=1 [ 1.614430] Key type dns_resolver registered [ 1.618980] omap_voltage_late_init: Voltage driver support not added [ 1.626119] Power Management for TI OMAP4+ devices. [ 1.631426] ThumbEE CPU extension supported. [ 1.635912] Registering SWP/SWPB emulation handler [ 1.642724] palmas 0-0058: Irq flag is 0x00000008 [ 1.667302] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.698959] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.713115] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.735583] rtc-ds1307 2-006f: SET TIME! [ 1.741338] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.748092] rtc-ds1307 2-006f: 64 bytes nvram [ 1.752693] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.761504] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.796075] vdd_3v3: supplied by regen1 [ 1.836957] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.854145] aic_dvdd_fixed: disabling [ 1.858157] ldousb: disabling [ 1.862199] Waiting for root device /dev/mmcblk1p1... [ 1.869657] mmc1: MAN_BKOPS_EN bit is not set [ 1.881661] mmc1: new high speed MMC card at address 0001 [ 1.887641] mmcblk0: mmc1:0001 S10004 3.56 GiB [ 1.892534] mmcblk0boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.898888] mmcblk0boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.905755] mmcblk0: p1

[PYBOOT] [beagleboard-x15 01:40]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:41]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:42]: Done.

========================================================================

Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.450728] NET: Registered protocol family 10 [ 1.455973] sit: IPv6 over IPv4 tunneling driver [ 1.461153] NET: Registered protocol family 17 [ 1.465817] can: controller area network core (rev 20120528 abi 9) [ 1.472324] NET: Registered protocol family 29 [ 1.476985] can: raw protocol (rev 20120528) [ 1.481463] can: broadcast manager protocol (rev 20120528 t) [ 1.487389] can: netlink gateway (rev 20130117) max_hops=1 [ 1.493355] Key type dns_resolver registered [ 1.497898] omap_voltage_late_init: Voltage driver support not added [ 1.504833] Power Management for TI OMAP4+ devices. [ 1.510096] ThumbEE CPU extension supported. [ 1.514675] ata1: SATA link down (SStatus 0 SControl 300) [ 1.521584] palmas 0-0058: Irq flag is 0x00000008 [ 1.546184] palmas 0-0058: Muxing GPIO 2f, PWM 0, LED 0 [ 1.574353] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 1.587656] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.609743] rtc-ds1307 2-006f: SET TIME! [ 1.615358] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.622058] rtc-ds1307 2-006f: 64 bytes nvram [ 1.626646] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.634456] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.669938] vdd_3v3: supplied by regen1 [ 1.705085] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.717518] aic_dvdd_fixed: disabling [ 1.721519] ldousb: disabling [ 1.725313] Waiting for root device /dev/mmcblk1p1... [ 1.763855] mmc1: MAN_BKOPS_EN bit is not set [ 1.775816] mmc1: new high speed MMC card at address 0001 [ 1.781691] mmcblk0: mmc1:0001 S10004 3.56 GiB [ 1.786524] mmcblk0boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.792813] mmcblk0boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.799558] mmcblk0: p1

[PYBOOT] [beagleboard-x15 02:11]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 02:12]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 02:13]: Done.

========================================================================

Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.188445] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.198819] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.203674] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.209965] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.216831] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.226416] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.235910] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.242955] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.292857] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.299150] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.306025] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.315609] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.325110] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.332146] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.338251] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.344555] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.351397] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.360986] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.370524] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.377592] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.384216] vdd_3v3: supplied by regen1 [ 2.423115] hctosys: unable to open rtc device (rtc0) [ 2.428431] sr_init: No PMIC hook to init smartreflex [ 2.433981] sr_init: platform driver register failed for SR [ 2.477129] mmc1: MAN_BKOPS_EN bit is not set [ 2.485769] aic_dvdd_fixed: disabling [ 2.490000] ldousb: disabling [ 2.494382] mmc1: new high speed MMC card at address 0001 [ 2.500708] Waiting for root device /dev/mmcblk1p1... [ 2.502044] mmcblk0: mmc1:0001 S10004 3.56 GiB [ 2.502727] mmcblk0boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.503500] mmcblk0boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.517182] mmcblk0: p1

[PYBOOT] [beagleboard-x15 01:43]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:44]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:46]: Done.

========================================================================

Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 3.178370] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.183955] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.191062] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf08d6000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.201065] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.210379] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.215869] vdd_1v8_gen: supplied by vdd_5v_in [ 3.222724] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.229347] [drm] No driver support for vblank timestamp query. [ 3.235294] drm drm: No connectors reported connected with modes [ 3.241312] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.266755] Console: switching to colour frame buffer device 128x48 [ 3.278790] drm drm: fb0: frame buffer device [ 3.293300] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.301756] usb3_vbus: supplied by vdd_5v_in [ 3.308129] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.314597] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.320006] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.327833] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.343308] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.350174] hub 1-0:1.0: USB hub found [ 3.353957] hub 1-0:1.0: 1 port detected [ 3.358814] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.364232] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.372004] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.383303] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.390098] hub 2-0:1.0: USB hub found [ 3.393877] hub 2-0:1.0: 1 port detected [ 3.402329] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.416312] vdd_sata,avdd_plle: disabling [ 3.420764] usb1_vbus: disabling [ 3.424798] Waiting for root device /dev/mmcblk1p1... [ 3.703306] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.641858] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:43]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:44]: got exception: timeout ~$off

[PYBOOT] [beaver 01:45]: Done.

========================================================================

Board beaver-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 3.157921] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.163503] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.170120] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf08d6000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.180113] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.189299] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.194778] vdd_1v8_gen: supplied by vdd_5v_in [ 3.200402] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.207013] [drm] No driver support for vblank timestamp query. [ 3.212943] drm drm: No connectors reported connected with modes [ 3.218945] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.238200] Console: switching to colour frame buffer device 128x48 [ 3.249970] drm drm: fb0: frame buffer device [ 3.254406] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.262360] usb3_vbus: supplied by vdd_5v_in [ 3.268611] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.275060] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.280462] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.288179] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.303014] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.309370] hub 1-0:1.0: USB hub found [ 3.313135] hub 1-0:1.0: 1 port detected [ 3.317784] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.323190] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.330843] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.343013] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.349288] hub 2-0:1.0: USB hub found [ 3.353054] hub 2-0:1.0: 1 port detected [ 3.360555] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.373824] vdd_sata,avdd_plle: disabling [ 3.378208] usb1_vbus: disabling [ 3.382120] Waiting for root device /dev/mmcblk1p1... [ 3.663021] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.601543] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:54]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:55]: got exception: timeout ~$off

[PYBOOT] [beaver 01:57]: Done.

========================================================================

Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------

[ 3.603950] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf08b6000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.613953] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.622831] +VDD_5V_HDMI: supplied by sys_3v3,vdd_3v3_alw [ 3.628356] vdd_1v8_gen: supplied by vdd_5v_in [ 3.636722] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.643359] [drm] No driver support for vblank timestamp query. [ 3.649359] drm drm: No connectors reported connected with modes [ 3.655374] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.681538] Console: switching to colour frame buffer device 128x48 [ 3.693330] drm drm: fb0: frame buffer device [ 3.720417] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.727918] usb3_vbus: supplied by vdd_5v_in [ 3.734024] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.740488] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.745904] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.753883] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.770426] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.778128] hub 1-0:1.0: USB hub found [ 3.781918] hub 1-0:1.0: 1 port detected [ 3.786704] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.792136] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.799999] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.820418] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.828002] hub 2-0:1.0: USB hub found [ 3.831782] hub 2-0:1.0: 1 port detected [ 3.840048] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.858995] vdd_sata,avdd_plle: disabling [ 3.863480] usb1_vbus: disabling [ 3.866914] ALSA device list: [ 3.869871] #0: NVIDIA Tegra Beaver [ 3.874172] Waiting for root device /dev/mmcblk1p1... [ 4.150424] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 5.135878] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18

[PYBOOT] [beaver 01:40]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beaver 01:41]: got exception: timeout ~$off

[PYBOOT] [beaver 01:43]: Done.

========================================================================

Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 82.543583] random: dd: uninitialized urandom read (512 bytes read, 54 bits of entropy available) [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

[ 86.843754] eth0: device MAC address e6:d4:2d:1a:32:08 [ 86.995092] RX IPC Checksum Offload disabled [ 86.999731] No MAC Management Counters available Listening on LPF/eth0/e6:d4:2d:1a:32:08 Sending on LPF/eth0/e6:d4:2d:1a:32:08 Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 4 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 9 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14 No DHCPOFFERS received. No working leases in persistent database - sleeping. [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c.

[PYBOOT] [colombus 03:20]: Timed out waiting for "<type 'str'>": INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2.

[PYBOOT] [colombus 03:21]: got exception: timeout ~$off

[PYBOOT] [colombus 03:22]: Done.

========================================================================

Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.450205] can: netlink gateway (rev 20130117) max_hops=1 [ 2.457364] Key type dns_resolver registered [ 2.463998] ThumbEE CPU extension supported. [ 2.468440] Registering SWP/SWPB emulation handler [ 2.473810] mmc1: new high speed MMC card at address 0001 [ 2.482757] mmcblk0: mmc1:0001 SEM32G 29.1 GiB [ 2.492156] mmcblk0boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.500730] mmcblk0boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.502043] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.502572] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.506320] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.519249] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.519262] [drm] No driver support for vblank timestamp query. [ 2.537712] mmcblk0rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.548478] mmcblk0: p1 [ 2.689137] Console: switching to colour frame buffer device 240x75 [ 2.777150] drm drm: fb0: frame buffer device [ 2.793714] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.803152] usb2_vbus: supplied by vdd-sys-5v0 [ 2.816839] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.822431] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.831247] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.843745] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.853997] hub 1-0:1.0: USB hub found [ 2.857997] hub 1-0:1.0: 1 port detected [ 2.869136] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.881871] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.942533] dvdd_ts: disabling [ 2.945741] usb1_vbus: disabling [ 2.949055] vdd_cam_1v8_reg: disabling [ 2.956113] Waiting for root device /dev/mmcblk1p1... [ 3.168703] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.151376] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f

[PYBOOT] [dalmore 02:04]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 02:05]: got exception: timeout ~$off

[PYBOOT] [dalmore 02:06]: Done.

========================================================================

Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.450155] can: netlink gateway (rev 20130117) max_hops=1 [ 2.457325] Key type dns_resolver registered [ 2.463936] ThumbEE CPU extension supported. [ 2.468378] Registering SWP/SWPB emulation handler [ 2.473768] mmc1: new high speed MMC card at address 0001 [ 2.482721] mmcblk0: mmc1:0001 SEM32G 29.1 GiB [ 2.491171] mmcblk0boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.500188] mmcblk0boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.503044] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.505851] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.510916] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.524235] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.524587] mmcblk0rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.535342] mmcblk0: p1 [ 2.539587] [drm] No driver support for vblank timestamp query. [ 2.709977] Console: switching to colour frame buffer device 240x75 [ 2.796898] drm drm: fb0: frame buffer device [ 2.818628] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.827879] usb2_vbus: supplied by vdd-sys-5v0 [ 2.841616] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.847254] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.857398] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.873684] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.883949] hub 1-0:1.0: USB hub found [ 2.887937] hub 1-0:1.0: 1 port detected [ 2.898596] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.911147] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.970907] dvdd_ts: disabling [ 2.974117] usb1_vbus: disabling [ 2.977376] vdd_cam_1v8_reg: disabling [ 2.984520] Waiting for root device /dev/mmcblk1p1... [ 3.198637] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.181200] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f

[PYBOOT] [dalmore 01:50]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:51]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:53]: Done.

========================================================================

Board dalmore-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 2.057553] can: netlink gateway (rev 20130117) max_hops=1 [ 2.064203] Key type dns_resolver registered [ 2.069284] ThumbEE CPU extension supported. [ 2.101092] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.106044] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.116130] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.139049] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.145732] [drm] No driver support for vblank timestamp query. [ 2.226620] mmc1: MAN_BKOPS_EN bit is not set [ 2.310727] Console: switching to colour frame buffer device 240x75 [ 2.403178] drm drm: fb0: frame buffer device [ 2.407783] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.415985] usb2_vbus: supplied by vdd-sys-5v0 [ 2.421909] mmc1: new high speed MMC card at address 0001 [ 2.433798] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.439342] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.447441] mmcblk0: mmc1:0001 SEM32G 29.1 GiB [ 2.452464] mmcblk0boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.458865] mmcblk0boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.465403] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.471663] mmcblk0rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.479294] mmcblk0: p1 [ 2.482304] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.495039] hub 1-0:1.0: USB hub found [ 2.499802] hub 1-0:1.0: 1 port detected [ 2.507153] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.518510] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.559626] dvdd_ts: disabling [ 2.562810] usb1_vbus: disabling [ 2.566089] vdd_cam_1v8_reg: disabling [ 2.571534] Waiting for root device /dev/mmcblk1p1... [ 2.810739] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.765986] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f

[PYBOOT] [dalmore 02:01]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 02:02]: got exception: timeout ~$off

[PYBOOT] [dalmore 02:03]: Done.

========================================================================

Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------

[ 2.816128] Bluetooth: RFCOMM socket layer initialized [ 2.821350] Bluetooth: RFCOMM ver 1.11 [ 2.825337] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.830732] Bluetooth: BNEP socket layer initialized [ 2.836209] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.842322] Bluetooth: HIDP socket layer initialized [ 2.848761] Key type dns_resolver registered [ 2.858367] Registering SWP/SWPB emulation handler [ 2.887959] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.894284] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.905150] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.929037] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.935811] [drm] No driver support for vblank timestamp query. [ 3.111184] Console: switching to colour frame buffer device 240x75 [ 3.197932] drm drm: fb0: frame buffer device [ 3.225146] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.232327] usb2_vbus: supplied by vdd-sys-5v0 [ 3.244190] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.249970] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.259036] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.285164] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.299224] hub 1-0:1.0: USB hub found [ 3.303179] hub 1-0:1.0: 1 port detected [ 3.317019] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.331153] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.423677] dvdd_ts: disabling [ 3.426898] usb1_vbus: disabling [ 3.430213] vdd_cam_1v8_reg: disabling [ 3.434944] ALSA device list: [ 3.437936] #0: NVIDIA Tegra Dalmore [ 3.443699] Waiting for root device /dev/mmcblk1p1... [ 3.625163] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.660022] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f

[PYBOOT] [dalmore 01:46]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:47]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:48]: Done.

========================================================================

Board hummingboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

[ 2.318832] usbhid: USB HID core driver [ 2.328757] mmc0: host does not support reading read-only switch, assuming write-enable [ 2.338340] fsl-asoc-card sound-sgtl5000: ASoC: CPU DAI (null) not registered [ 2.345623] fsl-asoc-card sound-sgtl5000: snd_soc_register_card failed (-517) [ 2.359554] mmc0: new high speed SDHC card at address b368 [ 2.365447] fsl-asrc 2034000.asrc: driver registered [ 2.503963] mmcblk0: mmc0:b368 00000 7.51 GiB [ 2.645169] mmcblk0: p1 p2 [ 3.028249] imx-sgtl5000 sound-sgtl5000: ASoC: CODEC DAI sgtl5000 not registered [ 3.035729] imx-sgtl5000 sound-sgtl5000: snd_soc_register_card failed (-517) [ 3.045803] imx-spdif sound-spdif: snd-soc-dummy-dai <-> 2004000.spdif mapping ok [ 3.059544] NET: Registered protocol family 10 [ 3.067038] sit: IPv6 over IPv4 tunneling driver [ 3.073589] NET: Registered protocol family 17 [ 3.078189] can: controller area network core (rev 20120528 abi 9) [ 3.084539] NET: Registered protocol family 29 [ 3.089060] can: raw protocol (rev 20120528) [ 3.093444] can: broadcast manager protocol (rev 20120528 t) [ 3.099180] can: netlink gateway (rev 20130117) max_hops=1 [ 3.105434] Key type dns_resolver registered [ 3.114859] Registering SWP/SWPB emulation handler [ 3.125926] imx_thermal 2000000.aips-bus:tempmon: Commercial CPU temperature grade - max:95C critical:90C passive:85C [ 3.138644] /soc/aips-bus@02100000/usdhc@02190000: voltage-ranges unspecified [ 3.145859] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode [ 3.156231] fsl-asoc-card sound-sgtl5000: ASoC: CODEC DAI sgtl5000 not registered [ 3.163734] fsl-asoc-card sound-sgtl5000: snd_soc_register_card failed (-517) [ 3.171214] imx-sgtl5000 sound-sgtl5000: ASoC: CODEC DAI sgtl5000 not registered [ 3.178663] imx-sgtl5000 sound-sgtl5000: snd_soc_register_card failed (-517) [ 3.187094] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01 00:00:01 UTC (1) [ 3.235899] brcm_reg: disabling [ 3.239551] ALSA device list: [ 3.242529] #0: On-board SPDIF [ 3.247232] Waiting for root device /dev/mmcblk1p2...

[PYBOOT] [hummingboard 01:47]: Timed out waiting for "<type 'str'>":

[PYBOOT] [hummingboard 01:48]: got exception: timeout ~$off

[PYBOOT] [hummingboard 01:49]: Done.

========================================================================

Board hummingboard-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.255925] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode [ 1.265638] /soc/aips-bus@02100000/usdhc@02194000: voltage-ranges unspecified [ 1.272813] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 1.281986] sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO [ 1.288214] sdhci-esdhc-imx 2194000.usdhc: No vqmmc regulator found [ 1.329909] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 1.339341] ledtrig-cpu: registered to indicate activity on CPUs [ 1.345620] usbcore: registered new interface driver usbhid [ 1.351221] usbhid: USB HID core driver [ 1.359981] NET: Registered protocol family 10 [ 1.367382] sit: IPv6 over IPv4 tunneling driver [ 1.372671] NET: Registered protocol family 17 [ 1.377165] can: controller area network core (rev 20120528 abi 9) [ 1.383430] NET: Registered protocol family 29 [ 1.387910] can: raw protocol (rev 20120528) [ 1.392208] can: broadcast manager protocol (rev 20120528 t) [ 1.397899] can: netlink gateway (rev 20130117) max_hops=1 [ 1.403871] Key type dns_resolver registered [ 1.408320] ThumbEE CPU extension supported. [ 1.412630] Registering SWP/SWPB emulation handler [ 1.428411] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 1.436822] /soc/aips-bus@02100000/usdhc@02190000: voltage-ranges unspecified [ 1.444019] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode [ 1.456071] hctosys: unable to open rtc device (rtc0) [ 1.470942] brcm_reg: disabling [ 1.475090] Waiting for root device /dev/mmcblk1p2... [ 1.512363] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.526445] mmc0: new high speed SDHC card at address b368 [ 1.532427] mmcblk0: mmc0:b368 00000 7.51 GiB [ 1.538348] mmcblk0: p1 p2 [ 1.542122] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 1.550567] /soc/aips-bus@02100000/usdhc@02190000: voltage-ranges unspecified [ 1.557755] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode

[PYBOOT] [hummingboard 01:54]: Timed out waiting for "<type 'str'>":

[PYBOOT] [hummingboard 01:55]: got exception: timeout ~$off

[PYBOOT] [hummingboard 01:56]: Done.

========================================================================

Board hummingboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.255205] /soc/aips-bus@02100000/usdhc@02190000: voltage-ranges unspecified [ 1.262371] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode [ 1.272044] /soc/aips-bus@02100000/usdhc@02194000: voltage-ranges unspecified [ 1.279207] sdhci-esdhc-imx 2194000.usdhc: could not get ultra high speed state, work on normal mode [ 1.288370] sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO [ 1.293902] sdhci-esdhc-imx 2194000.usdhc: No vqmmc regulator found [ 1.333819] mmc0: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA [ 1.343010] ledtrig-cpu: registered to indicate activity on CPUs [ 1.349272] usbcore: registered new interface driver usbhid [ 1.354867] usbhid: USB HID core driver [ 1.362817] NET: Registered protocol family 10 [ 1.370231] sit: IPv6 over IPv4 tunneling driver [ 1.375408] NET: Registered protocol family 17 [ 1.379897] can: controller area network core (rev 20120528 abi 9) [ 1.386144] NET: Registered protocol family 29 [ 1.390614] can: raw protocol (rev 20120528) [ 1.394906] can: broadcast manager protocol (rev 20120528 t) [ 1.400590] can: netlink gateway (rev 20130117) max_hops=1 [ 1.406517] Key type dns_resolver registered [ 1.410950] ThumbEE CPU extension supported. [ 1.423874] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 1.432018] /soc/aips-bus@02100000/usdhc@02190000: voltage-ranges unspecified [ 1.441219] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode [ 1.453093] hctosys: unable to open rtc device (rtc0) [ 1.463790] brcm_reg: disabling [ 1.467714] Waiting for root device /dev/mmcblk1p2... [ 1.506241] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.520251] mmc0: new high speed SDHC card at address b368 [ 1.526133] mmcblk0: mmc0:b368 00000 7.51 GiB [ 1.531957] mmcblk0: p1 p2 [ 1.535578] imx-gpc 20dc000.gpc: failed to get pu regulator: -517 [ 1.543786] /soc/aips-bus@02100000/usdhc@02190000: voltage-ranges unspecified [ 1.550948] sdhci-esdhc-imx 2190000.usdhc: could not get ultra high speed state, work on normal mode

[PYBOOT] [hummingboard 01:53]: Timed out waiting for "<type 'str'>":

[PYBOOT] [hummingboard 01:54]: got exception: timeout ~$off

[PYBOOT] [hummingboard 01:55]: Done.

========================================================================

Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------

[ 1.942842] usbhid: USB HID core driver [ 1.953850] NET: Registered protocol family 10 [ 1.959907] sit: IPv6 over IPv4 tunneling driver [ 1.960857] NET: Registered protocol family 17 [ 1.963374] NET: Registered protocol family 15 [ 1.967973] Registering SWP/SWPB emulation handler [ 1.979400] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.979560] s3c-rtc 10070000.rtc: warning: invalid RTC value so initializing it [ 1.980167] mmc1: MAN_BKOPS_EN bit is not set [ 1.981440] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.981672] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.981947] mmc1: new DDR MMC card at address 0001 [ 2.007711] mmcblk0: mmc1:0001 008G92 7.28 GiB [ 2.007977] mmcblk0boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 2.008219] mmcblk0boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 2.008463] mmcblk0rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 2.009744] mmcblk0: p1 p2 [ 2.027796] usb 1-3: New USB device found, idVendor=0424, idProduct=3503 [ 2.027806] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.028647] hub 1-3:1.0: USB hub found [ 2.028786] hub 1-3:1.0: 3 ports detected [ 2.061802] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 2.093035] max98090 1-0010: MAX98090 REVID=0x43 [ 2.095514] max98090 1-0010: use default 2.8v micbias [ 2.104977] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 2.108510] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 2.137944] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 2.159287] VDD10_HDMI_1.0V: disabling [ 2.160044] vdd_g3d: disabling [ 2.161111] BUCK8_2.8V: disabling [ 2.165134] ALSA device list: [ 2.166674] #0: Odroid-U3 [ 2.170407] Waiting for root device /dev/mmcblk1p2...

[PYBOOT] [odroidu3 01:46]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 01:47]: got exception: timeout ~$off

[PYBOOT] [odroidu3 01:48]: Done.

========================================================================

Board odroidu3-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.390662] dwmmc_exynos 12550000.mmc: No vqmmc regulator found [ 1.396568] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.429781] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.430294] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.436516] ledtrig-cpu: registered to indicate activity on CPUs [ 1.441372] usbcore: registered new interface driver usbhid [ 1.446802] usbhid: USB HID core driver [ 1.453289] NET: Registered protocol family 10 [ 1.455496] sit: IPv6 over IPv4 tunneling driver [ 1.459981] NET: Registered protocol family 17 [ 1.464062] can: controller area network core (rev 20120528 abi 9) [ 1.470255] NET: Registered protocol family 29 [ 1.474638] can: raw protocol (rev 20120528) [ 1.478896] can: broadcast manager protocol (rev 20120528 t) [ 1.484534] can: netlink gateway (rev 20130117) max_hops=1 [ 1.490240] Key type dns_resolver registered [ 1.494360] ThumbEE CPU extension supported. [ 1.498508] Registering SWP/SWPB emulation handler [ 1.505967] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.535286] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:21 UTC (946688421) [ 1.547382] mmc1: MAN_BKOPS_EN bit is not set [ 1.548060] VDD10_HDMI_1.0V: disabling [ 1.548698] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.548910] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.549184] mmc1: new DDR MMC card at address 0001 [ 1.549624] mmcblk0: mmc1:0001 008G92 7.28 GiB [ 1.549815] mmcblk0boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.550005] mmcblk0boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.550185] mmcblk0rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.579358] mmcblk0: p1 p2 [ 1.599473] vdd_g3d: disabling [ 1.602491] BUCK8_2.8V: disabling [ 1.607555] Waiting for root device /dev/mmcblk1p2...

[PYBOOT] [odroidu3 02:01]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 02:02]: got exception: timeout ~$off

[PYBOOT] [odroidu3 02:03]: Done.

========================================================================

Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.675086] mmc2: switch to bus width 2 failed [ 1.679557] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.685865] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.685921] mmc2: switch to bus width 1 failed [ 1.685934] mmc2: new high speed MMC card at address 0001 [ 1.692862] mmcblk0: mmc2:0001 MMC08G 7.46 GiB [ 1.693064] mmcblk0boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.693244] mmcblk0boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.697921] mmcblk0: p3 [ 1.725647] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.732118] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.737547] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.745320] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.748045] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.756205] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.759158] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.766685] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.778834] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.785486] hub 3-0:1.0: USB hub found [ 1.786257] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.790129] mmc0: new SDIO card at address 0001 [ 1.799279] hub 3-0:1.0: 1 port detected [ 1.807134] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.813754] [drm] No driver support for vblank timestamp query. [ 1.903953] Console: switching to colour frame buffer device 170x48 [ 1.923762] drm drm: fb0: frame buffer device [ 1.938826] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.945426] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.952404] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.966126] vdd_1v5: disabling [ 1.969200] vdd_1v2: disabling [ 2.503371] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.514524] Waiting for root device /dev/mmcblk2p3...

[PYBOOT] [seaboard 02:10]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 02:11]: got exception: timeout ~$off

[PYBOOT] [seaboard 02:12]: Done.

========================================================================

Board seaboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.646282] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.652663] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.663046] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.669511] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.674925] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.682667] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.694688] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.701249] hub 3-0:1.0: USB hub found [ 1.705051] hub 3-0:1.0: 1 port detected [ 1.712402] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.719013] [drm] No driver support for vblank timestamp query. [ 1.725841] mmc2: switch to bus width 2 failed [ 1.752004] mmc2: switch to bus width 1 failed [ 1.756460] mmc2: new high speed MMC card at address 0001 [ 1.770022] mmcblk0: mmc2:0001 MMC08G 7.46 GiB [ 1.770132] mmcblk0boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.770269] mmcblk0boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.771352] mmcblk0: p3 [ 1.828655] Console: switching to colour frame buffer device 170x48 [ 1.866335] drm drm: fb0: frame buffer device [ 1.870802] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.877244] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.884154] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.928519] vdd_1v5: disabling [ 1.931588] vdd_1v2: disabling [ 1.949275] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.962890] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.971225] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.984012] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 2.008604] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 2.017293] mmc0: new SDIO card at address 0001 [ 2.510583] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.521677] Waiting for root device /dev/mmcblk2p3...

[PYBOOT] [seaboard 01:47]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:48]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:49]: Done.

========================================================================

Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------

[ 1.787900] Bluetooth: BNEP socket layer initialized [ 1.792931] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.798907] Bluetooth: HIDP socket layer initialized [ 1.804610] Key type dns_resolver registered [ 1.810184] Registering SWP/SWPB emulation handler [ 1.819045] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.831420] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.838459] VDDIO_HDMI: supplied by vdd_5v0 [ 1.843113] vdd_sys: supplied by vdd_5v0 [ 1.847202] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.852297] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.859135] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.867869] mmc0: new SDIO card at address 0001 [ 1.870389] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.870419] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.870492] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.871054] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.890796] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.907245] hub 3-0:1.0: USB hub found [ 1.911074] hub 3-0:1.0: 1 port detected [ 1.923211] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.929814] [drm] No driver support for vblank timestamp query. [ 2.002393] Console: switching to colour frame buffer device 170x48 [ 2.021787] drm drm: fb0: frame buffer device [ 2.060784] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.067891] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 2.075439] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.094342] vdd_1v5: disabling [ 2.097392] vdd_1v2: disabling [ 2.100556] ALSA device list: [ 2.103540] #0: NVIDIA Tegra Seaboard [ 2.382559] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.394047] Waiting for root device /dev/mmcblk2p3...

[PYBOOT] [seaboard 01:47]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:48]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:49]: Done.

========================================================================

Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.955596] mmcblk0boot1: mmc3:0001 partition 2 2.00 MiB [ 1.956146] mmcblk0rpmb: mmc3:0001 partition 3 128 KiB [ 1.962036] mmcblk0: p1 p2 p3 p4 [ 2.001739] NET: Registered protocol family 10 [ 2.008514] sit: IPv6 over IPv4 tunneling driver [ 2.013732] NET: Registered protocol family 17 [ 2.018249] can: controller area network core (rev 20120528 abi 9) [ 2.024505] NET: Registered protocol family 29 [ 2.028961] can: raw protocol (rev 20120528) [ 2.033233] can: broadcast manager protocol (rev 20120528 t) [ 2.038909] can: netlink gateway (rev 20130117) max_hops=1 [ 2.044921] Key type dns_resolver registered [ 2.049377] ThumbEE CPU extension supported. [ 2.053680] Registering SWP/SWPB emulation handler [ 2.060852] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.067626] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.076843] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.083862] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.090850] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.097808] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.111450] db8500-esram12: disabling [ 2.115234] db8500-esram34: disabling [ 2.119201] V-CSI/DSI: disabling [ 2.122497] mmci-reg: disabling [ 2.126159] uart-pl011 80007000.uart: DMA channel TX dma0chan8 [ 2.132049] uart-pl011 80007000.uart: DMA channel RX dma0chan9 [ 2.138214] Waiting for root device /dev/mmcblk3p4... cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.

Disconnected.

[PYBOOT] [snowball 02:26]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:27]: got exception: timeout ~$off

[PYBOOT] [snowball 02:29]: Done.

========================================================================

Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.898223] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.908020] ledtrig-cpu: registered to indicate activity on CPUs [ 1.914459] usbcore: registered new interface driver usbhid [ 1.920043] usbhid: USB HID core driver [ 1.931427] NET: Registered protocol family 10 [ 1.937835] sit: IPv6 over IPv4 tunneling driver [ 1.943511] NET: Registered protocol family 17 [ 1.948028] can: controller area network core (rev 20120528 abi 9) [ 1.954345] NET: Registered protocol family 29 [ 1.958831] can: raw protocol (rev 20120528) [ 1.963134] can: broadcast manager protocol (rev 20120528 t) [ 1.968841] can: netlink gateway (rev 20130117) max_hops=1 [ 1.975067] Key type dns_resolver registered [ 1.979675] ThumbEE CPU extension supported. [ 1.989624] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 1.996337] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.005462] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.012451] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.019439] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.026428] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.038421] db8500-esram12: disabling [ 2.042205] db8500-esram34: disabling [ 2.046112] V-CSI/DSI: disabling [ 2.049407] mmci-reg: disabling [ 2.053039] uart-pl011 80007000.uart: DMA channel TX dma0chan8 [ 2.058929] uart-pl011 80007000.uart: DMA channel RX dma0chan9 [ 2.065032] Waiting for root device /dev/mmcblk3p4... [ 2.111816] mmc3: new high speed MMC card at address 0001 [ 2.117797] mmcblk0: mmc3:0001 3.53 GiB [ 2.122161] mmcblk0boot0: mmc3:0001 partition 1 2.00 MiB [ 2.127807] mmcblk0boot1: mmc3:0001 partition 2 2.00 MiB [ 2.133453] mmcblk0rpmb: mmc3:0001 partition 3 128 KiB [ 2.140045] mmcblk0: p1 p2 p3 p4

[PYBOOT] [snowball 02:03]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:04]: got exception: timeout ~$off

[PYBOOT] [snowball 02:05]: Done.

========================================================================

Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------

[ 2.577575] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.583770] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.596557] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.607299] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.617248] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.627960] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.652679] NET: Registered protocol family 10 [ 2.668640] sit: IPv6 over IPv4 tunneling driver [ 2.674865] NET: Registered protocol family 17 [ 2.679382] NET: Registered protocol family 35 [ 2.684051] NET: Registered protocol family 37 [ 2.688720] Registering SWP/SWPB emulation handler [ 2.705383] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.712890] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-01-03 00:00:30 UTC (946857630) [ 2.722473] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.729522] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.736511] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.743499] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.757324] db8500-esram12: disabling [ 2.761108] db8500-esram34: disabling [ 2.765075] V-CSI/DSI: disabling [ 2.768341] mmci-reg: disabling [ 2.771667] ALSA device list: [ 2.774627] #0: MOP500-card [ 2.777954] uart-pl011 80007000.uart: DMA channel TX dma0chan12 [ 2.783905] uart-pl011 80007000.uart: DMA channel RX dma0chan13 [ 2.790100] Waiting for root device /dev/mmcblk3p4... Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.

Disconnected.

[PYBOOT] [snowball 01:56]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 01:57]: got exception: timeout ~$off

[PYBOOT] [snowball 01:58]: Done.