Failed boards:
bbb multi_v7_defconfig : FAILED 3:11.40 beaver multi_v7_defconfig : FAILED 2:57.42 capri multi_v7_defconfig : FAILED 2:58.14 cubie multi_v7_defconfig : FAILED 3:00.89 cubie2 sunxi_defconfig : FAILED 1:18.81 cubie2 multi_v7_defconfig : FAILED 3:02.50 cubie2 multi_lpae_defconfig : FAILED 2:53.74 dalmore multi_v7_defconfig : FAILED 3:04.69 dalmore multi_lpae_defconfig : FAILED 3:02.22 hummingboard multi_v7_defconfig : FAILED 1:02.39 omap5uevm multi_v7_defconfig : FAILED 3:50.95 omap5uevm multi_lpae_defconfig : FAILED 3:50.13 panda multi_v7_defconfig : FAILED 3:08.39 seaboard multi_v7_defconfig : FAILED 3:02.08 snowball multi_v7_defconfig : FAILED 1:12.49 trimslice multi_v7_defconfig : FAILED 3:08.39 wandboard multi_v7_defconfig : FAILED 1:07.12
Successful boards:
apc vt8500_v6_v7_defconfig : passed 1:13.09 arndale exynos_defconfig : passed 1:02.19 bbb omap2plus_defconfig : passed 1:32.95 beaver tegra_defconfig : passed 0:52.48 capri bcm_defconfig : passed 0:43.14 cubie sunxi_defconfig : passed 0:55.31 dalmore tegra_defconfig : passed 1:20.09 hummingboard imx_v6_v7_defconfig : passed 2:01.76 omap5uevm omap2plus_defconfig : warnings 1:16.61 panda omap2plus_defconfig : passed 1:15.72 sama5 sama5_defconfig : passed 1:49.51 seaboard tegra_defconfig : passed 1:01.66 snow exynos_defconfig : passed 1:27.77 snowball u8500_defconfig : passed 1:29.37 trimslice tegra_defconfig : passed 0:56.36 wandboard imx_v6_v7_defconfig : passed 0:52.35
Offline boards:
Board legend is available at http://arm-soc.lixom.net/boards.html
Last entries of failed logs below:
========================================================================
Board bbb-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.236663] gspca_main: v2.14.0 registered [ 1.242998] sdhci: Secure Digital Host Controller Interface driver [ 1.249535] sdhci: Copyright(c) Pierre Ossman [ 1.255309] 48060000.mmc supply vmmc_aux not found, using dummy regulator [ 1.297210] 481d8000.mmc supply vmmc_aux not found, using dummy regulator [ 1.337238] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.344088] usbcore: registered new interface driver usbhid [ 1.349991] usbhid: USB HID core driver [ 1.359050] TCP: cubic registered [ 1.362553] NET: Registered protocol family 17 [ 1.367617] Key type dns_resolver registered [ 1.373046] ThumbEE CPU extension supported. [ 1.377629] Registering SWP/SWPB emulation handler [ 1.382657] PJ4 iWMMXt coprocessor enabled. [ 1.395034] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.449903] mmc1: BKOPS_EN bit is not set [ 1.456564] mmc1: new high speed MMC card at address 0001 [ 1.463015] mmcblk0: mmc1:0001 MMC02G 1.78 GiB [ 1.468032] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6 [ 1.474432] davinci_mdio 4a101000.mdio: detected phy mask fffffffe [ 1.481442] mmcblk0boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.488112] mmcblk0boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.495501] libphy: 4a101000.mdio: probed [ 1.499836] davinci_mdio 4a101000.mdio: phy[0]: device 4a101000.mdio:00, driver unknown [ 1.509591] Detected MACID = bc:6a:29:7a:42:a8 [ 1.515839] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.529997] ALSA device list: [ 1.533133] No soundcards found. [ 1.538043] mmcblk0: p1 p2 [ 1.543858] mmcblk0boot1: unknown partition table [ 1.550896] mmcblk0boot0: unknown partition table [ 1.558052] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 1.567730] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 1.627376] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.635935] VFS: Mounted root (ext4 filesystem) on device 179:2. [ 1.662735] devtmpfs: mounted [ 1.666915] Freeing unused kernel memory: 556K (c0a6d000 - c0af8000) [ 1.741719] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout
========================================================================
Board beaver-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.660187] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 3.666273] pci 0000:00:01.0: bridge window [mem 0x28000000-0x280fffff 64bit pref] [ 3.674016] pci 0000:00:01.0: nv_msi_ht_cap_quirk didn't locate host bridge [ 3.681112] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.686709] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.693074] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf002e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 472 [ 3.703063] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.713445] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.720044] [drm] No driver support for vblank timestamp query. [ 3.726003] host1x drm: No connectors reported connected with modes [ 3.732268] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.750760] Console: switching to colour frame buffer device 128x48 [ 3.762722] host1x drm: fb0: frame buffer device [ 3.767432] host1x drm: registered panic notifier [ 3.772129] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.778326] platform 7d004000.usb: Driver tegra-ehci requests probe deferral [ 3.785707] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.797049] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.802447] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.810256] tegra-ehci 7d004000.usb: irq 53, io mem 0x7d004000 [ 3.833049] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.839412] hub 1-0:1.0: USB hub found [ 3.843190] hub 1-0:1.0: 1 port detected [ 3.847525] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.852920] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.860715] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.883047] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.889337] hub 2-0:1.0: USB hub found [ 3.893115] hub 2-0:1.0: 1 port detected [ 3.900974] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.913712] ALSA device list: [ 3.916679] #0: NVIDIA Tegra Beaver [ 3.922825] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.931744] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 3.947865] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.955986] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.982126] devtmpfs: mounted [ 3.985557] Freeing unused kernel memory: 556K (c0a6d000 - c0af8000) ~$off # PYBOOT: Exception: timeout
========================================================================
Board capri-multi_v7_defconfig failure log: -------------------------------------------------
[ 0.930000] mmcblk0boot0: mmc0:0001 016G4A partition 1 2.00 MiB [ 0.930000] mmcblk0boot1: mmc0:0001 016G4A partition 2 2.00 MiB [ 0.940000] mmcblk0rpmb: mmc0:0001 016G4A partition 3 256 KiB [ 0.940000] Alternate GPT is invalid, using primary GPT. [ 0.950000] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 [ 0.950000] mmcblk0boot1: unknown partition table [ 0.960000] mmcblk0boot0: unknown partition table [ 1.010000] EXT4-fs (mmcblk0p8): mounted filesystem with ordered data mode. Opts: (null) [ 1.020000] VFS: Mounted root (ext4 filesystem) readonly on device 179:8. [ 1.020000] devtmpfs: mounted [ 1.030000] Freeing unused kernel memory: 556K (c0a6d000 - c0af8000) [ 1.050000] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 1.050000] Alignment trap: not handling instruction e1923f9f at [<c07d1a9c>] [ 1.050000] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 1.050000] Internal error: : 1 [#2] SMP ARM [ 1.050000] Modules linked in: [ 1.050000] CPU: 0 PID: 29042 Comm: %s [ 1.050000] Not tainted 3.14.0-11993-gce7613d #1 [ 1.050000] task: c09aa494 ti: ea838000 task.ti: 70737573 [ 1.050000] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 1.050000] LR is at __down_read_trylock+0x14/0x54 [ 1.050000] pc : [<c07d1aa0>] lr : [<c027cfb4>] psr: 40000193 [ 1.050000] sp : ea839f38 ip : c0b04390 fp : ea83a020 [ 1.050000] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 1.050000] r7 : c09aa494 r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 1.050000] r3 : 00000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 1.050000] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 1.050000] Control: 10c5387d Table: babf404a DAC: 00000015 [ 1.050000] Process %s [ 1.050000] (pid: 29042, stack limit = 0x707377c3) [ 1.050000] Stack: (0xea839f38 to 0x70739573) [ 1.050000] [<c07d1aa0>] (_raw_spin_lock_irqsave) from [<c027cfb4>] (__down_read_trylock+0x14/0x54) [ 1.050000] [<c027cfb4>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 1.050000] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 1.050000] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 1.050000] ---[ end trace c15865f7fb993a53 ]--- [ 1.050000] Alignment trap: not handling instruction e1923f9f at [<c07d1a9c>] [ 1.050000] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie-multi_v7_defconfig failure log: -------------------------------------------------
[ 0.968842] usbcore: registered new interface driver usb-storage [ 0.975965] mousedev: PS/2 mouse device common for all mice [ 0.982848] i2c /dev entries driver [ 0.987976] usbcore: registered new interface driver uvcvideo [ 0.993786] USB Video Class driver (1.1.1) [ 0.997878] gspca_main: v2.14.0 registered [ 1.004771] sdhci: Secure Digital Host Controller Interface driver [ 1.010947] sdhci: Copyright(c) Pierre Ossman [ 1.015671] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.021792] usbcore: registered new interface driver usbhid [ 1.027381] usbhid: USB HID core driver [ 1.033829] TCP: cubic registered [ 1.037150] NET: Registered protocol family 17 [ 1.041762] Key type dns_resolver registered [ 1.046193] ThumbEE CPU extension supported. [ 1.050478] Registering SWP/SWPB emulation handler [ 1.055281] PJ4 iWMMXt coprocessor enabled. [ 1.060564] ahci-5v: 5000 mV [ 1.064028] usb1-vbus: 5000 mV [ 1.067541] usb2-vbus: 5000 mV [ 1.071220] platform 1c14000.usb: Driver ehci-platform requests probe deferral [ 1.079051] platform 1c1c000.usb: Driver ehci-platform requests probe deferral [ 1.086706] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.100120] platform 1c14000.usb: Driver ehci-platform requests probe deferral [ 1.108007] platform 1c1c000.usb: Driver ehci-platform requests probe deferral [ 3.432758] sun4i-emac 1c0b000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx [ 3.452743] Sending DHCP requests ., OK [ 3.473184] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.173 [ 3.480946] IP-Config: Complete: [ 3.484205] device=eth0, hwaddr=08:00:08:1e:2f:44, ipaddr=172.16.1.173, mask=255.255.255.0, gw=172.16.1.1 [ 3.494233] host=172.16.1.173, domain=lixom.net, nis-domain=(none) [ 3.500839] bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath= [ 3.507375] nameserver0=172.16.1.1 [ 3.511498] ALSA device list: [ 3.514480] No soundcards found. [ 3.523048] VFS: Mounted root (nfs filesystem) on device 0:11. [ 3.529277] devtmpfs: mounted [ 3.532858] Freeing unused kernel memory: 556K (c0a6d000 - c0af8000) ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_lpae_defconfig failure log: -------------------------------------------------
[ 3.329659] ., OK [ 3.350118] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.109 [ 3.357929] IP-Config: Complete: [ 3.361204] device=eth0, hwaddr=08:00:08:1e:2f:64, ipaddr=172.16.1.109, mask=255.255.255.0, gw=172.16.1.1 [ 3.371206] host=172.16.1.109, domain=lixom.net, nis-domain=(none) [ 3.377811] bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath= [ 3.384340] nameserver0=172.16.1.1 [ 3.388477] ALSA device list: [ 3.391456] No soundcards found. [ 3.400375] VFS: Mounted root (nfs filesystem) on device 0:11. [ 3.406687] devtmpfs: mounted [ 3.410306] Freeing unused kernel memory: 560K (c0a74000 - c0b00000) [ 3.434232] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 3.441033] Alignment trap: not handling instruction e1923f9f at [<c07d8964>] [ 3.448161] Unhandled fault: alignment exception (0x221) at 0x20736eae [ 3.454679] Internal error: : 221 [#2] SMP ARM [ 3.459116] Modules linked in: [ 3.462186] CPU: 0 PID: 29042 Comm: %s [ 3.462186] Not tainted 3.14.0-11993-gce7613d #1 [ 3.470709] task: c09b14a0 ti: ea03e000 task.ti: 70737573 [ 3.476110] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 3.481162] LR is at __down_read_trylock+0x14/0x54 [ 3.485948] pc : [<c07d8968>] lr : [<c027dd08>] psr: 40000193 [ 3.485948] sp : ea03ffb8 ip : c0b0c3e8 fp : ea0400a0 [ 3.497408] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 3.502625] r7 : c09b14a0 r6 : 00000207 r5 : 20736eae r4 : 20736eaa [ 3.509142] r3 : 20000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 3.515660] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 3.522872] Control: 30c5387d Table: 6a3ec500 DAC: fffffffd [ 3.528608] Process %s [ 3.528608] (pid: 29042, stack limit = 0x707377c3) [ 3.535908] Stack: (0xea03ffb8 to 0x70739573) [ 3.540276] [<c07d8968>] (_raw_spin_lock_irqsave) from [<c027dd08>] (__down_read_trylock+0x14/0x54) [ 3.549322] [<c027dd08>] (__down_read_trylock) from [<c0218010>] (do_page_fault+0x78/0x27c) [ 3.557665] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 3.563753] ---[ end trace 4d686486462a217c ]--- [ 3.568369] Alignment trap: not handling instruction e1923f9f at [<c07d8964>] [ 3.575492] Unhandled fault: alignment exception (0x221) at 0x20736eae ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-multi_v7_defconfig failure log: -------------------------------------------------
[ 4.359929] IP-Config: Got DHCP answer from 172.16.1.1, my address is 172.16.1.109 [ 4.367774] IP-Config: Complete: [ 4.371051] device=eth0, hwaddr=08:00:08:1e:2f:64, ipaddr=172.16.1.109, mask=255.255.255.0, gw=172.16.1.1 [ 4.381050] host=172.16.1.109, domain=lixom.net, nis-domain=(none) [ 4.387656] bootserver=172.16.1.7, rootserver=172.16.1.7, rootpath= [ 4.394183] nameserver0=172.16.1.1 [ 4.398322] ALSA device list: [ 4.401302] No soundcards found. [ 4.410403] VFS: Mounted root (nfs filesystem) on device 0:11. [ 4.416673] devtmpfs: mounted [ 4.420293] Freeing unused kernel memory: 556K (c0a6d000 - c0af8000) [ 4.443972] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM [ 4.450787] Alignment trap: not handling instruction e1923f9f at [<c07d1a9c>] [ 4.457912] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 4.464431] Internal error: : 1 [#2] SMP ARM [ 4.468694] Modules linked in: [ 4.471762] CPU: 0 PID: 29042 Comm: %s [ 4.471762] Not tainted 3.14.0-11993-gce7613d #1 [ 4.480288] task: c09aa494 ti: ea03c000 task.ti: 70737573 [ 4.485692] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 4.490742] LR is at __down_read_trylock+0x14/0x54 [ 4.495528] pc : [<c07d1aa0>] lr : [<c027cfb4>] psr: 40000193 [ 4.495528] sp : ea03df18 ip : c0b04390 fp : ea03e000 [ 4.506987] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 4.512204] r7 : c09aa494 r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 4.518722] r3 : 20000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 4.525240] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 4.532451] Control: 10c5387d Table: 6a47806a DAC: 00000015 [ 4.538189] Process %s [ 4.538189] (pid: 29042, stack limit = 0x707377c3) [ 4.545489] Stack: (0xea03df18 to 0x70739573) [ 4.549858] [<c07d1aa0>] (_raw_spin_lock_irqsave) from [<c027cfb4>] (__down_read_trylock+0x14/0x54) [ 4.558902] [<c027cfb4>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 4.567248] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 4.574897] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 4.580985] ---[ end trace 49e4168f92d51584 ]--- [ 4.585599] Alignment trap: not handling instruction e1923f9f at [<c07d1a9c>] [ 4.592722] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: timeout
========================================================================
Board cubie2-sunxi_defconfig failure log: -------------------------------------------------
[ 0.017725] platform ahci-5v.2: Driver reg-fixed-voltage requests probe deferral [ 0.017748] reg-fixed-voltage usb1-vbus.3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb1_vbus_pin@0, deferring probe [ 0.017762] platform usb1-vbus.3: Driver reg-fixed-voltage requests probe deferral [ 0.017781] reg-fixed-voltage usb2-vbus.4: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/usb2_vbus_pin@0, deferring probe [ 0.017794] platform usb2-vbus.4: Driver reg-fixed-voltage requests probe deferral [ 0.018739] Switched to clocksource arch_sys_counter [ 0.025699] NET: Registered protocol family 2 [ 0.026179] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.026265] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.026387] TCP: Hash tables configured (established 8192 bind 8192) [ 0.026470] TCP: reno registered [ 0.026487] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.026540] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.026738] NET: Registered protocol family 1 [ 0.027122] RPC: Registered named UNIX socket transport module. [ 0.027135] RPC: Registered udp transport module. [ 0.027141] RPC: Registered tcp transport module. [ 0.027147] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.028120] futex hash table entries: 512 (order: 3, 32768 bytes) [ 0.028587] bounce pool size: 64 pages [ 0.036375] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.036396] io scheduler noop registered [ 0.036402] io scheduler deadline registered [ 0.036580] io scheduler cfq registered (default) [ 0.038224] sunxi-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver [ 0.079258] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 0.081650] console [ttyS0] disabled [ 0.101845] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 33, base_baud = 1500000) is a U6_16550A [ 0.616894] console [ttyS0] enabled [ 0.621587] mousedev: PS/2 mouse device common for all mice [ 0.627400] i2c /dev entries driver [ 0.632228] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 0.641216] TCP: cubic registered [ 0.644536] NET: Registered protocol family 17 [ 0.649093] Registering SWP/SWPB emulation handler [ 0.654778] ahci-5v: 5000 mV [ 0.658005] usb1-vbus: 5000 mV [ 0.661419] usb2-vbus: 5000 mV ~$off # PYBOOT: Exception: timeout
========================================================================
Board dalmore-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.746417] input: NVIDIA Tegra Dalmore Headphones as /devices/soc0/sound.5/sound/card0/input0 [ 2.759425] TCP: cubic registered [ 2.762841] NET: Registered protocol family 17 [ 2.767958] Key type dns_resolver registered [ 2.774032] ThumbEE CPU extension supported. [ 2.778356] Registering SWP/SWPB emulation handler [ 2.783217] PJ4 iWMMXt coprocessor enabled. [ 2.794195] dvdd_ts: 1800 mV [ 2.798916] usb1_vbus: 5000 mV [ 2.802375] usb1_vbus: supplied by vdd-sys-5v0 [ 2.808313] usb2_vbus: 5000 mV [ 2.811642] usb2_vbus: supplied by vdd-sys-5v0 [ 2.817613] vdd_hdmi_5v0: 5000 mV [ 2.821202] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.830919] vdd_cam_1v8_reg: 1800 mV [ 2.850909] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.857649] [drm] No driver support for vblank timestamp query. [ 2.988282] Console: switching to colour frame buffer device 240x75 [ 3.073915] host1x drm: fb0: frame buffer device [ 3.078725] host1x drm: registered panic notifier [ 3.083621] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.091329] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.103366] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.108955] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.119962] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.142970] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.152116] hub 1-0:1.0: USB hub found [ 3.156176] hub 1-0:1.0: 1 port detected [ 3.165211] input: gpio-keys.3 as /devices/soc0/gpio-keys.3/input/input1 [ 3.176288] palmas-rtc rtc.8: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.218840] ALSA device list: [ 3.221851] #0: NVIDIA Tegra Dalmore [ 3.229623] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.240401] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 3.282707] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.290954] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.306813] devtmpfs: mounted [ 3.311505] Freeing unused kernel memory: 560K (c0a74000 - c0b00000) ~$off # PYBOOT: Exception: timeout
========================================================================
Board dalmore-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.745772] input: NVIDIA Tegra Dalmore Headphones as /devices/soc0/sound.5/sound/card0/input0 [ 2.758785] TCP: cubic registered [ 2.762134] NET: Registered protocol family 17 [ 2.767264] Key type dns_resolver registered [ 2.773349] ThumbEE CPU extension supported. [ 2.777673] Registering SWP/SWPB emulation handler [ 2.782536] PJ4 iWMMXt coprocessor enabled. [ 2.793517] dvdd_ts: 1800 mV [ 2.797831] usb1_vbus: 5000 mV [ 2.801141] usb1_vbus: supplied by vdd-sys-5v0 [ 2.806952] usb2_vbus: 5000 mV [ 2.810252] usb2_vbus: supplied by vdd-sys-5v0 [ 2.816527] vdd_hdmi_5v0: 5000 mV [ 2.820120] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.829764] vdd_cam_1v8_reg: 1800 mV [ 2.847352] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.854096] [drm] No driver support for vblank timestamp query. [ 2.973414] Console: switching to colour frame buffer device 240x75 [ 3.059078] host1x drm: fb0: frame buffer device [ 3.063913] host1x drm: registered panic notifier [ 3.068699] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.076528] platform 7d008000.usb: Driver tegra-ehci requests probe deferral [ 3.088080] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.093660] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.103663] tegra-ehci 7d008000.usb: irq 129, io mem 0x7d008000 [ 3.122441] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.131864] hub 1-0:1.0: USB hub found [ 3.135925] hub 1-0:1.0: 1 port detected [ 3.144949] input: gpio-keys.3 as /devices/soc0/gpio-keys.3/input/input1 [ 3.157782] palmas-rtc rtc.8: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.200548] ALSA device list: [ 3.203606] #0: NVIDIA Tegra Dalmore [ 3.211433] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.221373] EXT4-fs (mmcblk0p1): couldn't mount as ext2 due to feature incompatibilities [ 3.266275] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.274602] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.289548] devtmpfs: mounted [ 3.294289] Freeing unused kernel memory: 556K (c0a6d000 - c0af8000) ~$off # PYBOOT: Exception: timeout
========================================================================
Board hummingboard-multi_v7_defconfig failure log: -------------------------------------------------
C1 U-Boot > tftp 0x10800000 mainline/v3.14-11993-gce7613d/multi_v7_defconfig/zImage tftp 0x10800000 mainline/v3.14-11993-gce7613d/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.111 Filename 'mainline/v3.14-11993-gce7613d/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################### 1.9 MiB/s done Bytes transferred = 4647560 (46ea88 hex) C1 U-Boot > setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 C1 U-Boot > tftp 0x11000000 mainline/v3.14-11993-gce7613d/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb tftp 0x11000000 mainline/v3.14-11993-gce7613d/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.111 Filename 'mainline/v3.14-11993-gce7613d/multi_v7_defconfig/dtbs/imx6dl-hummingboard.dtb'. Load address: 0x11000000 Loading: *## 353.5 KiB/s done Bytes transferred = 25705 (6469 hex) C1 U-Boot > printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug earlyprintk C1 U-Boot > bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x46ea88 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 11009468
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 46.730795] smps9: 2100 mV [ 46.734600] smps10_out2: 5000 mV [ 46.738821] smps10_out1: 5000 mV [ 46.742683] ldo1: 1500 <--> 1800 mV [ 46.747268] ldo2: 2800 mV [ 46.751606] ldo3: 1500 mV [ 46.755050] ldo4: 1500 <--> 1800 mV [ 46.760291] ldo5: 1800 mV [ 46.766115] ldo6: 1200 mV [ 46.769803] ldo7: 2000 mV [ 46.774145] ldo8: 3000 mV [ 46.778337] ldo9: 1800 <--> 3000 mV at 900 mV [ 46.784484] ldoln: 1800 mV [ 46.788900] ldousb: 3250 mV [ 46.792399] REGEN1: no parameters [ 46.795950] REGEN2: no parameters [ 46.799643] regen3: no parameters [ 46.803441] SYSEN1: no parameters [ 46.806992] SYSEN2: no parameters [ 47.050134] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.057242] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.063489] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 47.071421] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 47.110211] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 47.123677] ALSA device list: [ 47.126781] No soundcards found. [ 47.130825] Waiting for root device /dev/mmcblk1p2... [ 47.166697] mmc2: host does not support reading read-only switch. assuming write-enable. [ 47.176905] mmc2: new high speed SDHC card at address 0001 [ 47.182867] mmcblk1: mmc2:0001 00000 14.6 GiB [ 47.188333] mmcblk1: p1 p2 [ 47.240364] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 47.249209] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities [ 47.271927] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 47.280403] VFS: Mounted root (ext4 filesystem) readonly on device 179:50. [ 47.294978] devtmpfs: mounted [ 47.298337] Freeing unused kernel memory: 560K (c0a74000 - c0b00000) [ 47.331375] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout
========================================================================
Board omap5uevm-multi_v7_defconfig failure log: -------------------------------------------------
[ 47.619747] smps9: 2100 mV [ 47.623561] smps10_out2: 5000 mV [ 47.627767] smps10_out1: 5000 mV [ 47.631625] ldo1: 1500 <--> 1800 mV [ 47.636207] ldo2: 2800 mV [ 47.640519] ldo3: 1500 mV [ 47.643966] ldo4: 1500 <--> 1800 mV [ 47.649204] ldo5: 1800 mV [ 47.655056] ldo6: 1200 mV [ 47.658749] ldo7: 2000 mV [ 47.663091] ldo8: 3000 mV [ 47.667279] ldo9: 1800 <--> 3000 mV at 900 mV [ 47.673423] ldoln: 1800 mV [ 47.677862] ldousb: 3250 mV [ 47.681350] REGEN1: no parameters [ 47.684899] REGEN2: no parameters [ 47.688587] regen3: no parameters [ 47.692384] SYSEN1: no parameters [ 47.695935] SYSEN2: no parameters [ 47.939451] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 47.946545] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 47.952788] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 47.960729] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 47.999531] /home/build/work/batch/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 48.013017] ALSA device list: [ 48.016118] No soundcards found. [ 48.020151] Waiting for root device /dev/mmcblk1p2... [ 48.056037] mmc2: host does not support reading read-only switch. assuming write-enable. [ 48.066227] mmc2: new high speed SDHC card at address 0001 [ 48.072186] mmcblk1: mmc2:0001 00000 14.6 GiB [ 48.077646] mmcblk1: p1 p2 [ 48.129684] EXT4-fs (mmcblk1p2): couldn't mount as ext3 due to feature incompatibilities [ 48.138530] EXT4-fs (mmcblk1p2): couldn't mount as ext2 due to feature incompatibilities [ 48.161244] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null) [ 48.169719] VFS: Mounted root (ext4 filesystem) readonly on device 179:50. [ 48.184298] devtmpfs: mounted [ 48.187663] Freeing unused kernel memory: 556K (c0a6d000 - c0af8000) [ 48.220689] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout
========================================================================
Board panda-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.778717] VUSIM: 1200 <--> 2900 mV at 1800 mV [ 1.784210] VDAC: 1800 mV [ 1.784210] VANA: 2100 mV [ 1.791046] VCXIO: 1800 mV [ 1.791046] VUSB: 3300 mV [ 1.797973] V1V8: 1800 mV [ 1.801544] V2V1: 2100 mV [ 1.807525] omap_i2c 48070000.i2c: bus 0 rev0.11 at 400 kHz [ 1.888580] usb 1-1: new high-speed USB device number 2 using ehci-omap [ 2.041259] hub 1-1:1.0: USB hub found [ 2.045501] hub 1-1:1.0: 5 ports detected [ 2.109466] omap_i2c 48072000.i2c: bus 1 rev0.11 at 400 kHz [ 2.139251] gic_timer_retrigger: lost localtimer interrupt [ 2.358123] usb 1-1.1: new high-speed USB device number 3 using ehci-omap [ 2.450958] omap_i2c 48060000.i2c: bus 2 rev0.11 at 100 kHz [ 2.482727] smsc95xx v1.0.4 [ 2.554107] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-1.1, smsc95xx USB 2.0 Ethernet, e2:f5:8c:ae:c4:79 [ 2.789459] omap_i2c 48350000.i2c: bus 3 rev0.11 at 400 kHz [ 2.796020] 4809c000.mmc supply vmmc_aux not found, using dummy regulator [ 2.804504] omap_hsmmc 4809c000.mmc: pins are not configured from the driver [ 2.859558] 480d5000.mmc supply vmmc_aux not found, using dummy regulator [ 2.920776] mmc0: host does not support reading read-only switch. assuming write-enable. [ 2.931243] mmc0: new high speed SDHC card at address b368 [ 2.937347] mmcblk0: mmc0:b368 00000 7.51 GiB [ 2.943572] mmcblk0: p1 p2 [ 3.089538] twl_rtc rtc.15: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.099914] omap_hsmmc 480d5000.mmc: card claims to support voltages below defined range [ 3.103576] ALSA device list: [ 3.103576] No soundcards found. [ 3.117004] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities [ 3.126525] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities [ 3.142456] mmc1: queuing unknown CIS tuple 0x91 (3 bytes) [ 3.149414] mmc1: new SDIO card at address 0001 [ 3.160034] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 3.160034] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 3.186614] devtmpfs: mounted [ 3.190246] Freeing unused kernel memory: 556K (c0a6d000 - c0af8000) [ 3.236907] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout
========================================================================
Board seaboard-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.524982] Unable to handle kernel paging request at virtual address 00003aa0 [ 2.524986] Unable to handle kernel paging request at virtual address 00003aa0 [ 2.524989] Unable to handle kernel paging request at virtual address 00003aa0 [ 2.524992] Unable to handle kernel paging request at virtual address 00003aa0 [ 2.524996] Unable to handle kernel paging request at virtual address 00003aa0 [ 2.524999] Unable to handle kernel paging request at virtual address 00003aa0 [ 2.525002] Unable to handle kernel paging request at virtual address 00003aa0 [ 2.700989] Alignment trap: not handling instruction e1923f9f at [<c07d1a9c>] [ 2.708110] Unhandled fault: alignment exception (0x001) at 0x20736eae [ 2.714622] Internal error: : 1 [#2] SMP ARM [ 2.718878] Modules linked in: [ 2.721932] CPU: 0 PID: 29042 Comm: %s [ 2.721932] Not tainted 3.14.0-11993-gce7613d #1 [ 2.730447] task: c09aa494 ti: ea03a000 task.ti: 70737573 [ 2.735845] PC is at _raw_spin_lock_irqsave+0x14/0x4c [ 2.740888] LR is at __down_read_trylock+0x14/0x54 [ 2.745668] pc : [<c07d1aa0>] lr : [<c027cfb4>] psr: 40000193 [ 2.745668] sp : ea03bee8 ip : c0b04390 fp : ea03bfd0 [ 2.757122] r10: 00000028 r9 : 20736eaa r8 : 0000017c [ 2.762333] r7 : c09aa494 r6 : 00000017 r5 : 20736eae r4 : 20736eaa [ 2.768845] r3 : 00000193 r2 : 20736eae r1 : 00000000 r0 : 40000193 [ 2.775357] Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user [ 2.782563] Control: 10c5387d Table: 2a4c804a DAC: 00000015 [ 2.788295] Process %s [ 2.788295] (pid: 29042, stack limit = 0x707377c3) [ 2.795588] Stack: (0xea03bee8 to 0x70739573) [ 2.799946] [<c07d1aa0>] (_raw_spin_lock_irqsave) from [<c027cfb4>] (__down_read_trylock+0x14/0x54) [ 2.808989] [<c027cfb4>] (__down_read_trylock) from [<c0217cd0>] (do_page_fault+0x78/0x27c) [ 2.817329] [<c0217cd0>] (do_page_fault) from [<c02083d4>] (do_DataAbort+0x38/0x98) [ 2.824984] [<c02083d4>] (do_DataAbort) from [<c0212258>] (__dabt_svc+0x38/0x60) [ 2.832363] Exception stack(0xea03bfd0 to 0xea03c018) [ 2.837404] bfc0: 0000017c 00000017 ea03c000 00000193 [ 2.845566] bfe0: ea03c018 c0217c58 00000017 00000000 0000017c 00404100 ea068000 ea03c0f0 [ 2.853727] c000: c0b04390 ea03c018 c02083d4 c0217c84 00000193 ffffffff [ 2.860331] Code: e10f0000 f10c0080 f592f000 e1923f9f (e2831801) [ 2.866412] ---[ end trace 5c755c3669994ae2 ]--- [ 2.871019] Alignment trap: not handling instruction e1923f9f at [<c07d1a9c>] [ 2.878138] Unhandled fault: alignment exception (0x001) at 0x20736eae ~$off # PYBOOT: Exception: timeout
========================================================================
Board snowball-multi_v7_defconfig failure log: -------------------------------------------------
BOOTP broadcast 1 *** Unhandled DHCP Option in OFFER/ACK: 28 *** Unhandled DHCP Option in OFFER/ACK: 28 DHCP client bound to address 172.16.1.157 U8500 $ setenv serverip 172.16.1.3 setenv serverip 172.16.1.3 U8500 $ tftp 0x00100000 tmp/snowball-1C2S3l/tmpF0yHj_-uImage tftp 0x00100000 tmp/snowball-1C2S3l/tmpF0yHj_-uImage smc911x: detected LAN9221 controller smc911x: phy initialized smc911x: MAC 08:00:08:1e:0f:44 Using smc911x-0 device TFTP from server 172.16.1.3; our IP address is 172.16.1.157 Filename 'tmp/snowball-1C2S3l/tmpF0yHj_-uImage'. Load address: 0x100000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ############################################################ done Bytes transferred = 4688873 (478be9 hex) U8500 $ printenv bootargs printenv bootargs bootargs=console=ttyAMA2,115200 root=/dev/mmcblk0p4 rootwait rw debug earlyprintk U8500 $ bootm 0x00100000 bootm 0x00100000 ## Booting kernel from Legacy Image at 00100000 ... Image Name: Linux Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4688809 Bytes = 4.5 MB Load Address: 00008000 Entry Point: 00008000 Loading Kernel Image ... OK OK
Starting kernel ...
~$off # PYBOOT: Exception: timeout
========================================================================
Board trimslice-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.703508] tegra-ehci c5008000.usb: new USB bus registered, assigned bus number 2 [ 1.711348] tegra-ehci c5008000.usb: irq 129, io mem 0xc5008000 [ 1.729966] tegra-ehci c5008000.usb: USB 2.0 started, EHCI 1.00 [ 1.736730] hub 2-0:1.0: USB hub found [ 1.740539] hub 2-0:1.0: 1 port detected [ 1.748496] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.753936] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.761791] tegra-ehci c5000000.usb: irq 52, io mem 0xc5000000 [ 1.779966] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.786733] hub 3-0:1.0: USB hub found [ 1.790772] hub 3-0:1.0: 1 port detected [ 1.795823] input: gpio-keys.2 as /devices/soc0/gpio-keys.2/input/input0 [ 1.803198] rtc-em3027 2-0056: setting system clock to 2014-04-08 21:10:01 UTC (1396991401) [ 1.815787] ALSA device list: [ 1.818754] #0: tegra-trimslice [ 1.822761] Waiting for root device /dev/sda1... [ 2.060026] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 2.211543] hub 2-1:1.0: USB hub found [ 2.215396] hub 2-1:1.0: 4 ports detected [ 2.390128] usb 3-1: new high-speed USB device number 2 using tegra-ehci [ 2.606585] usb-storage 3-1:1.0: USB Mass Storage device detected [ 2.614035] scsi0 : usb-storage 3-1:1.0 [ 2.700339] usb 2-1.1: new high-speed USB device number 3 using tegra-ehci [ 3.163502] asix 2-1.1:1.0 eth1: register 'asix' at usb-c5008000.usb-1.1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:28:b1 [ 4.502737] scsi 0:0:0:0: Direct-Access SanDisk SSD P4 8GB 0015 PQ: 0 ANSI: 0 [ 4.514750] sd 0:0:0:0: [sda] 15649196 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 4.523707] sd 0:0:0:0: [sda] Write Protect is off [ 4.529833] sd 0:0:0:0: [sda] No Caching mode page found [ 4.535238] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 4.548119] sda: sda1 [ 4.555964] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.571773] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities [ 4.580825] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities [ 4.618458] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 4.626273] VFS: Mounted root (ext4 filesystem) on device 8:1. [ 4.646835] devtmpfs: mounted [ 4.651349] Freeing unused kernel memory: 556K (c0a6d000 - c0af8000) [ 4.697199] Internal error: Oops - undefined instruction: 0 [#1] SMP ARM ~$off # PYBOOT: Exception: timeout
========================================================================
Board wandboard-multi_v7_defconfig failure log: -------------------------------------------------
tftp 0x10800000 mainline/v3.14-11993-gce7613d/multi_v7_defconfig/zImage Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'mainline/v3.14-11993-gce7613d/multi_v7_defconfig/zImage'. Load address: 0x10800000 Loading: *################################################################# ################################################################# ################################################################# ################################################################# ######################################################### 6.1 MiB/s done Bytes transferred = 4647560 (46ea88 hex) => setenv serverip 172.16.1.3 setenv serverip 17node: wandboard status: on 2.16.1.3 => tftp 0x11000000 mainline/v3.14-11993-gce7613d/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb tftp 0x11000000 mainline/v3.14-11993-gce7613d/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb Using FEC device TFTP from server 172.16.1.3; our IP address is 172.16.1.110 Filename 'mainline/v3.14-11993-gce7613d/multi_v7_defconfig/dtbs/imx6q-wandboard.dtb'. Load address: 0x11000000 Loading: *## 1.1 MiB/s done Bytes transferred = 29143 (71d7 hex) => printenv bootargs printenv bootargs bootargs=console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait debug => bootz 0x10800000 - 0x11000000 bootz 0x10800000 - 0x11000000 Kernel image @ 0x10800000 [ 0x000000 - 0x46ea88 ] ## Flattened Device Tree blob at 11000000 Booting using the fdt blob at 0x11000000 Using Device Tree in place at 11000000, end 1100a1d6
Starting kernel ...
~$off # PYBOOT: Exception: timeout
kernel-build-reports@lists.linaro.org