Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-rc6-72-g33656a1/

Failed boards:

arndale arm-multi_v7_nosmp_defconfig : FAILED 23:33.67 bbb arm-omap2plus_defconfig : FAILED 1:54.39 bbb arm-multi_v7_defconfig : FAILED 1:54.79 bbb arm-multi_v7_nosmp_defconfig : FAILED 2:11.24 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:44.70 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:43.77 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:54.22 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 1:55.67 chitra powerpc-pasemi_defconfig : BUILD FAILED colombus arm-multi_v7_nosmp_defconfig : FAILED 3:21.29 cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.53 cosmic arm-multi_v7_defconfig : FAILED 2:02.43 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:00.45 dalmore arm-tegra_defconfig : FAILED 1:48.97 dalmore arm-multi_v7_defconfig : FAILED 1:55.79 dalmore arm-multi_lpae_defconfig : FAILED 2:01.29 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:56.26 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:58.01 omap5uevm arm-multi_v7_defconfig : FAILED 2:12.14 omap5uevm arm-multi_lpae_defconfig : FAILED 2:15.50 omap5uevm arm-multi_v7_nosmp_defconfig : FAILED 0:59.04 seaboard arm-tegra_defconfig : FAILED 1:50.78 seaboard arm-multi_v7_defconfig : FAILED 1:55.16 seaboard arm-multi_v7_nosmp_defconfig : FAILED 1:49.53 snow arm-multi_v7_nosmp_defconfig : FAILED 3:13.66 snowball arm-u8500_defconfig : FAILED 1:56.12 snowball arm-multi_v7_defconfig : FAILED 2:16.21 snowball arm-multi_v7_nosmp_defconfig : FAILED 2:00.13 wandboard arm-imx_v6_v7_defconfig : FAILED 2:58.02

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:07.49 arndale arm-exynos_defconfig : passed 1:39.83 arndale arm-multi_v7_defconfig : passed 1:29.26 arndale arm-multi_lpae_defconfig : passed 1:18.44 capri arm-bcm_defconfig : passed 0:46.27 capri arm-multi_v7_defconfig : passed 0:53.83 capri arm-multi_v7_nosmp_defconfig : warnings 0:59.79 chitra powerpc-ppc64_defconfig : passed 2:09.01 colombus arm-sunxi_defconfig : passed 2:32.97 colombus arm-multi_v7_defconfig : passed 2:42.07 colombus arm-multi_lpae_defconfig : passed 2:27.53 cubie arm-sunxi_defconfig : passed 0:49.63 cubie arm-multi_v7_defconfig : passed 0:50.61 cubie arm-multi_v7_nosmp_defconfig : passed 0:55.59 cubie2 arm-sunxi_defconfig : passed 0:54.99 cubie2 arm-multi_v7_defconfig : passed 0:55.36 cubie2 arm-multi_lpae_defconfig : passed 1:00.98 cubie2 arm-multi_v7_nosmp_defconfig : warnings 0:54.53 cubox arm-multi_v7_defconfig : passed 1:11.35 cubox arm-mvebu_v7_defconfig : passed 1:10.61 cubox arm-multi_v7_nosmp_defconfig : passed 1:17.74 hummingboard arm-imx_v6_v7_defconfig : passed 1:37.94 hummingboard arm-multi_v7_defconfig : passed 1:24.37 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:15.11 jetsontk1 arm-tegra_defconfig : passed 1:39.81 jetsontk1 arm-multi_v7_defconfig : passed 1:37.58 jetsontk1 arm-multi_lpae_defconfig : passed 1:54.01 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:46.71 omap5uevm arm-omap2plus_defconfig : passed 1:04.21 pandaes arm-omap2plus_defconfig : warnings 1:39.94 pandaes arm-multi_v7_defconfig : passed 1:44.70 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:53.63 pi arm-exynos_defconfig : passed 2:14.48 pi arm-multi_v7_defconfig : passed 2:21.63 pi arm-multi_lpae_defconfig : passed 2:21.45 pi arm-multi_v7_nosmp_defconfig : warnings 2:11.39 pit arm-exynos_defconfig : passed 2:12.37 pit arm-multi_v7_defconfig : passed 2:17.70 pit arm-multi_lpae_defconfig : passed 2:09.76 pit arm-multi_v7_nosmp_defconfig : warnings 2:13.11 seattle arm64-defconfig : warnings 2:12.52 snow arm-exynos_defconfig : passed 2:03.63 snow arm-multi_v7_defconfig : passed 2:16.15 snow arm-multi_lpae_defconfig : passed 1:58.92 trimslice arm-multi_v7_defconfig : passed 1:36.29 trimslice arm-multi_v7_nosmp_defconfig : warnings 2:46.39 wandboard arm-multi_v7_defconfig : passed 1:03.75 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:13.61

Offline boards:

beaver arm-tegra_defconfig : OFFLINE 2:12.89 beaver arm-multi_v7_defconfig : OFFLINE 2:23.91 beaver arm-multi_v7_nosmp_defconfig : OFFLINE 2:15.88 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:15.80 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:17.20 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 1:25.55 parallella arm-multi_v7_defconfig : OFFLINE 2:44.27 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:14.80 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:49.49 rk3288evb arm-multi_lpae_defconfig : OFFLINE 1:01.56 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:44.70 sama5 arm-sama5_defconfig : OFFLINE 2:17.98 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:24.04 socfpga arm-socfpga_defconfig : OFFLINE 2:26.68 socfpga arm-multi_v7_defconfig : OFFLINE 2:21.59 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:13.48 trimslice arm-tegra_defconfig : OFFLINE 2:13.57

Board legend is available at http://arm-soc.lixom.net/boards.html

Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.611878] usb@12000000 supply vdd33 not found, using dummy regulator [ 1.618396] usb@12000000 supply vdd10 not found, using dummy regulator [ 1.626767] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.631836] ehci-pci: EHCI PCI platform driver [ 1.636281] ehci-platform: EHCI generic platform driver [ 1.641603] ehci-omap: OMAP-EHCI Host Controller driver [ 1.646751] ehci-orion: EHCI orion driver [ 1.650746] SPEAr-ehci: EHCI SPEAr driver [ 1.654741] ehci-st: EHCI STMicroelectronics driver [ 1.659605] ehci-exynos: EHCI EXYNOS driver [ 1.663863] ehci-atmel: EHCI Atmel driver [ 1.667749] tegra-ehci: Tegra EHCI driver [ 1.671776] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.677837] ohci-pci: OHCI PCI platform driver [ 1.682287] ohci-platform: OHCI generic platform driver [ 1.687571] ohci-omap3: OHCI OMAP3 driver [ 1.691542] SPEAr-ohci: OHCI SPEAr driver [ 1.695538] ohci-st: OHCI STMicroelectronics driver [ 1.700398] ohci-atmel: OHCI Atmel driver [ 1.704666] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 1.709788] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 1 [ 1.717603] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.726108] xhci-hcd xhci-hcd.2.auto: irq 140, io mem 0x12000000 [ 1.732506] hub 1-0:1.0: USB hub found [ 1.735828] hub 1-0:1.0: 1 port detected [ 1.739909] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 1.745191] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 2 [ 1.752861] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.761283] hub 2-0:1.0: USB hub found [ 1.764642] hub 2-0:1.0: 1 port detected [ 1.768820] usbcore: registered new interface driver usb-storage [ 1.775528] mousedev: PS/2 mouse device common for all mice [ 1.782310] i2c /dev entries driver [ 1.787685] exynos-tmu 10060000.tmu: Regulator node (vtmu) not found [ 1.800234] sdhci: Secure Digital Host Controller Interface driver

[PYBOOT] [arndale 23:27]: got exception: maximum recursion depth exceeded ~$off

[PYBOOT] [arndale 23:28]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.631124] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.641350] ledtrig-cpu: registered to indicate activity on CPUs [ 1.648433] usbcore: registered new interface driver usbhid [ 1.654363] usbhid: USB HID core driver [ 1.666357] NET: Registered protocol family 10 [ 1.672948] sit: IPv6 over IPv4 tunneling driver [ 1.679083] NET: Registered protocol family 17 [ 1.683854] can: controller area network core (rev 20120528 abi 9) [ 1.690489] NET: Registered protocol family 29 [ 1.695208] can: raw protocol (rev 20120528) [ 1.699728] can: broadcast manager protocol (rev 20120528 t) [ 1.705723] can: netlink gateway (rev 20130117) max_hops=1 [ 1.712460] Key type dns_resolver registered [ 1.717367] omap_voltage_late_init: Voltage driver support not added [ 1.725647] ThumbEE CPU extension supported. [ 1.730285] Registering SWP/SWPB emulation handler [ 1.772675] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.779209] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.786988] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.795690] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.803612] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.811438] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.819261] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.826613] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.835278] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.843206] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.852954] mmc1: new high speed MMC card at address 0001 [ 1.860188] hctosys: unable to open rtc device (rtc0) [ 1.873161] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.879204] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.886193] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.895056] mmcblk1: p1 p2 [ 1.900751] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:52]: got exception: timeout ~$off

[PYBOOT] [bbb 01:53]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.317736] sdhci: Secure Digital Host Controller Interface driver [ 1.324259] sdhci: Copyright(c) Pierre Ossman [ 1.330067] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.393090] Synopsys Designware Multimedia Card Interface Driver [ 1.400460] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.409629] ledtrig-cpu: registered to indicate activity on CPUs [ 1.416375] usbcore: registered new interface driver usbhid [ 1.422254] usbhid: USB HID core driver [ 1.431861] NET: Registered protocol family 10 [ 1.438347] sit: IPv6 over IPv4 tunneling driver [ 1.444229] NET: Registered protocol family 17 [ 1.448970] can: controller area network core (rev 20120528 abi 9) [ 1.455565] NET: Registered protocol family 29 [ 1.460258] can: raw protocol (rev 20120528) [ 1.464769] can: broadcast manager protocol (rev 20120528 t) [ 1.470745] can: netlink gateway (rev 20130117) max_hops=1 [ 1.477265] Key type dns_resolver registered [ 1.482137] omap_voltage_late_init: Voltage driver support not added [ 1.489937] ThumbEE CPU extension supported. [ 1.502530] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.510087] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.518154] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.525885] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.533566] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.541242] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.548523] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.556191] hctosys: unable to open rtc device (rtc0) [ 1.566895] Waiting for root device /dev/mmcblk0p2... [ 1.602352] mmc1: new high speed MMC card at address 0001 [ 1.608817] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.613877] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.620356] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.628790] mmcblk1: p1 p2

[PYBOOT] [bbb 02:08]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 02:09]: got exception: timeout ~$off

[PYBOOT] [bbb 02:10]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.058474] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.064609] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.070955] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.077850] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.087474] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.097003] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.104040] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.147222] ledtrig-cpu: registered to indicate activity on CPUs [ 2.155952] oprofile: using arm/armv7 [ 2.161038] Initializing XFRM netlink socket [ 2.166110] NET: Registered protocol family 10 [ 2.176798] sit: IPv6 over IPv4 tunneling driver [ 2.185555] NET: Registered protocol family 17 [ 2.190485] NET: Registered protocol family 15 [ 2.195758] Key type dns_resolver registered [ 2.200618] omap_voltage_late_init: Voltage driver support not added [ 2.207353] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.215845] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.226118] ThumbEE CPU extension supported. [ 2.230771] Registering SWP/SWPB emulation handler [ 2.235820] SmartReflex Class3 initialized [ 2.305048] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.312336] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.322874] mmc1: new high speed MMC card at address 0001 [ 2.334969] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.343236] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.351004] hctosys: unable to open rtc device (rtc0) [ 2.356325] sr_init: No PMIC hook to init smartreflex [ 2.362112] sr_init: platform driver register failed for SR [ 2.402173] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.410131] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.424359] mmcblk1: p1 p2 [ 2.441614] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:52]: got exception: timeout ~$off

[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.717394] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.724459] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750659] rtc-ds1307 2-006f: SET TIME! [ 1.756414] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.763167] rtc-ds1307 2-006f: 64 bytes nvram [ 1.767785] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.775953] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.781740] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.789989] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.799161] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.806029] hub 1-0:1.0: USB hub found [ 1.809987] hub 1-0:1.0: 1 port detected [ 1.814386] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.820164] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.828276] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.837291] hub 2-0:1.0: USB hub found [ 1.841264] hub 2-0:1.0: 1 port detected [ 1.847295] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.881270] vdd_3v3: supplied by regen1 [ 1.919346] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.937530] aic_dvdd_fixed: disabling [ 1.942253] Waiting for root device /dev/mmcblk0p1... [ 1.969419] mmc1: new high speed MMC card at address 0001 [ 1.975397] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.980273] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.986605] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.993468] mmcblk1: p1 [ 2.120158] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.155182] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.180389] hub 2-1:1.0: USB hub found [ 2.184366] hub 2-1:1.0: 4 ports detected [ 2.276410] hub 1-1:1.0: USB hub found [ 2.280397] hub 1-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 01:50]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:51]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:52]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.712330] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.719412] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.745650] rtc-ds1307 2-006f: SET TIME! [ 1.751404] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.758157] rtc-ds1307 2-006f: 64 bytes nvram [ 1.762769] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.770951] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.776735] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.784981] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.794151] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.801024] hub 1-0:1.0: USB hub found [ 1.804978] hub 1-0:1.0: 1 port detected [ 1.809379] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.815160] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.823270] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.832279] hub 2-0:1.0: USB hub found [ 1.836249] hub 2-0:1.0: 1 port detected [ 1.842267] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.876248] vdd_3v3: supplied by regen1 [ 1.914364] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.932529] aic_dvdd_fixed: disabling [ 1.937270] Waiting for root device /dev/mmcblk0p1... [ 1.964433] mmc1: new high speed MMC card at address 0001 [ 1.970406] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.975286] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.981616] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.988481] mmcblk1: p1 [ 2.115137] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.150160] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.175378] hub 2-1:1.0: USB hub found [ 2.179356] hub 2-1:1.0: 4 ports detected [ 2.271401] hub 1-1:1.0: USB hub found [ 2.275381] hub 1-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:43]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.590712] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.597772] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.623015] rtc-ds1307 2-006f: SET TIME! [ 1.628638] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.635356] rtc-ds1307 2-006f: 64 bytes nvram [ 1.639941] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.647321] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.653093] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.661312] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.670465] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.677194] hub 1-0:1.0: USB hub found [ 1.681156] hub 1-0:1.0: 1 port detected [ 1.685475] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.691244] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.699338] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.708208] hub 2-0:1.0: USB hub found [ 1.712154] hub 2-0:1.0: 1 port detected [ 1.717406] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.753249] vdd_3v3: supplied by regen1 [ 1.784325] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.797245] aic_dvdd_fixed: disabling [ 1.802630] Waiting for root device /dev/mmcblk0p1... [ 1.849550] mmc1: new high speed MMC card at address 0001 [ 1.855418] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.860247] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.866542] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.873327] mmcblk1: p1 [ 1.992554] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.022574] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.051438] hub 2-1:1.0: USB hub found [ 2.055418] hub 2-1:1.0: 4 ports detected [ 2.147440] hub 1-1:1.0: USB hub found [ 2.151405] hub 1-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 01:52]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:53]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:54]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.175367] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.182231] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.192608] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.197469] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.203780] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.210629] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.220226] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.229720] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.236792] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.283791] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.290085] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.296947] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.306546] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.316047] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.323089] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.329207] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.335514] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.342365] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.351948] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.361441] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.368482] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.375171] vdd_3v3: supplied by regen1 [ 2.413892] hctosys: unable to open rtc device (rtc0) [ 2.419190] sr_init: No PMIC hook to init smartreflex [ 2.424702] sr_init: platform driver register failed for SR [ 2.465544] mmc1: new high speed MMC card at address 0001 [ 2.472346] aic_dvdd_fixed: disabling [ 2.473489] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.474233] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.474853] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.484619] mmcblk1: p1 [ 2.496393] ldousb: disabling [ 2.502408] Waiting for root device /dev/mmcblk0p1...

[PYBOOT] [beagleboard-x15 01:42]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:43]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:44]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[....] Synthesizing the initial hotplug events...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 41.861633] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 41.876032] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 85.224865] random: dd urandom read with 57 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

[ 89.612322] eth0: device MAC address ca:ae:55:1a:66:97 [ 89.767006] RX IPC Checksum Offload disabled [ 89.771616] No MAC Management Counters available [ 89.777359] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/ca:ae:55:1a:66:97 Sending on LPF/eth0/ca:ae:55:1a:66:97 Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 19

[PYBOOT] [colombus 03:18]: Timed out waiting for "<type 'str'>": DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8

[PYBOOT] [colombus 03:19]: got exception: timeout ~$off

[PYBOOT] [colombus 03:20]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

[ 14.466424] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.540658] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.550977] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.625160] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.635477] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.709702] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.720050] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.794514] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.804839] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.879089] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.889421] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.963607] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.973929] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.048194] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.058550] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.132908] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.143228] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.217460] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.227808] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.302144] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.312465] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.386698] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.397020] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.471242] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.481564] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.555740] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.566059] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.640290] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.650610] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.724794] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.735112] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.809332] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.819658] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 01:58]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 01:59]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:01]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 14.081212] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.155199] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.165271] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.239255] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.249331] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.323313] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.333391] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.407381] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.417458] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.491480] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.501564] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.575549] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.585618] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.659607] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.669679] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.743669] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.753755] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.827753] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.837824] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.911813] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.921898] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.995893] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.005969] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.079957] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.090030] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.164015] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.174110] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.248097] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.258176] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.332163] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.342245] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.416235] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.426313] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 01:59]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:00]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:01]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 13.872222] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 17.946134] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 17.956185] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.030096] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.040149] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.114062] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.124116] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.198028] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.208089] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.281999] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.292063] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.365980] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.376052] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.449968] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.460034] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.533948] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.543992] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.617900] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.627949] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.701856] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.711905] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.785810] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.795879] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 62.869793] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 62.879841] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 66.953750] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 66.963807] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.037721] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.047782] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.121697] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.131755] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.205662] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.215719] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 01:57]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 01:58]: got exception: timeout ~$off

[PYBOOT] [cosmic 01:59]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.486106] Key type dns_resolver registered [ 2.492524] ThumbEE CPU extension supported. [ 2.496946] Registering SWP/SWPB emulation handler [ 2.529724] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.536810] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.545172] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.560145] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.566893] [drm] No driver support for vblank timestamp query. [ 2.585200] mmc1: new high speed MMC card at address 0001 [ 2.595565] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.602693] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.612341] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.622182] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.632661] mmcblk1: p1 [ 2.745658] Console: switching to colour frame buffer device 240x75 [ 2.833101] drm drm: fb0: frame buffer device [ 2.853823] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.864100] usb2_vbus: supplied by vdd-sys-5v0 [ 2.875869] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.881510] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.890189] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.903856] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.913107] hub 1-0:1.0: USB hub found [ 2.917266] hub 1-0:1.0: 1 port detected [ 2.927051] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.940532] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.004308] dvdd_ts: disabling [ 3.007408] usb1_vbus: disabling [ 3.010771] vdd_cam_1v8_reg: disabling [ 3.018086] Waiting for root device /dev/mmcblk0p1... [ 3.233882] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.212487] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 65.459538] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:58]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:59]: got exception: timeout ~$off

[PYBOOT] [dalmore 02:00]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.486147] Key type dns_resolver registered [ 2.492554] ThumbEE CPU extension supported. [ 2.496985] Registering SWP/SWPB emulation handler [ 2.523068] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.530266] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.541698] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.556056] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.562848] [drm] No driver support for vblank timestamp query. [ 2.588772] mmc1: new high speed MMC card at address 0001 [ 2.598939] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.607465] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.616015] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.623113] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.633800] mmcblk1: p1 [ 2.742941] Console: switching to colour frame buffer device 240x75 [ 2.830452] drm drm: fb0: frame buffer device [ 2.848923] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.859068] usb2_vbus: supplied by vdd-sys-5v0 [ 2.870830] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.876425] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.885185] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.898935] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.909239] hub 1-0:1.0: USB hub found [ 2.913244] hub 1-0:1.0: 1 port detected [ 2.923798] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.938087] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.999857] dvdd_ts: disabling [ 3.002958] usb1_vbus: disabling [ 3.006328] vdd_cam_1v8_reg: disabling [ 3.013843] Waiting for root device /dev/mmcblk0p1... [ 3.228959] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.206501] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 65.339764] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:52]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:53]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:54]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 2.031198] can: broadcast manager protocol (rev 20120528 t) [ 2.036953] can: netlink gateway (rev 20130117) max_hops=1 [ 2.043599] Key type dns_resolver registered [ 2.048710] ThumbEE CPU extension supported. [ 2.080443] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.085377] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.095479] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.117695] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.124391] [drm] No driver support for vblank timestamp query. [ 2.288500] Console: switching to colour frame buffer device 240x75 [ 2.374440] drm drm: fb0: frame buffer device [ 2.379006] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.386975] usb2_vbus: supplied by vdd-sys-5v0 [ 2.392953] mmc1: new high speed MMC card at address 0001 [ 2.402176] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.407765] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.415848] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.420875] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.427589] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.433671] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.440044] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.446201] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.454998] mmcblk1: p1 [ 2.458827] hub 1-0:1.0: USB hub found [ 2.467180] hub 1-0:1.0: 1 port detected [ 2.475346] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.486653] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.526151] dvdd_ts: disabling [ 2.529238] usb1_vbus: disabling [ 2.532546] vdd_cam_1v8_reg: disabling [ 2.537948] Waiting for root device /dev/mmcblk0p1... [ 2.779605] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.732556] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f

[PYBOOT] [dalmore 01:53]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:54]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:55]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------

[ 2.656001] Bluetooth: RFCOMM ver 1.11 [ 2.659957] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.665350] Bluetooth: BNEP socket layer initialized [ 2.670449] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.676445] Bluetooth: HIDP socket layer initialized [ 2.683428] Key type dns_resolver registered [ 2.693034] Registering SWP/SWPB emulation handler [ 2.723314] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.728622] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.737383] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.762236] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.769003] [drm] No driver support for vblank timestamp query. [ 2.946217] Console: switching to colour frame buffer device 240x75 [ 3.033120] drm drm: fb0: frame buffer device [ 3.058790] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.066069] usb2_vbus: supplied by vdd-sys-5v0 [ 3.074512] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.080331] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.089506] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.108811] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.122860] hub 1-0:1.0: USB hub found [ 3.126819] hub 1-0:1.0: 1 port detected [ 3.140616] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.156081] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.250988] dvdd_ts: disabling [ 3.254093] usb1_vbus: disabling [ 3.257355] vdd_cam_1v8_reg: disabling [ 3.262175] ALSA device list: [ 3.265194] #0: NVIDIA Tegra Dalmore [ 3.271200] Waiting for root device /dev/mmcblk0p1... [ 3.448689] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.472131] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 61.596590] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:45]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:46]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:47]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------

[ 1.642400] usb 1-3: new high-speed USB device number 2 using exynos-ehci [ 1.651314] dwmmc_exynos 12550000.mmc: allocated mmc-pwrseq [ 1.682442] dwmmc_exynos 12550000.mmc: 1 slots initialized [ 1.683618] usbcore: registered new interface driver usbhid [ 1.688862] usbhid: USB HID core driver [ 1.697542] NET: Registered protocol family 10 [ 1.698168] sit: IPv6 over IPv4 tunneling driver [ 1.701372] NET: Registered protocol family 17 [ 1.705407] NET: Registered protocol family 15 [ 1.709856] Key type dns_resolver registered [ 1.714183] Registering SWP/SWPB emulation handler [ 1.720015] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.724434] s3c-rtc 10070000.rtc: warning: invalid RTC value so initializing it [ 1.731818] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.751301] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.755583] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.762961] max98090 1-0010: MAX98090 REVID=0x43 [ 1.765180] max98090 1-0010: use default 2.8v micbias [ 1.775201] mmc1: new DDR MMC card at address 0001 [ 1.780346] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.784465] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.784470] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.787469] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.803079] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.808987] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.815535] mmcblk1: p1 p2 [ 1.820762] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:20 UTC (946688420) [ 1.842000] VDD10_HDMI_1.0V: disabling [ 1.842685] vdd_g3d: disabling [ 1.843751] BUCK8_2.8V: disabling [ 1.84o767] ALSA device list: [ 1.849386] #0: Odroid-U3 [ 1.853075] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [odroidu3 01:55]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 01:56]: got exception: timeout ~$off

[PYBOOT] [odroidu3 01:57]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.592112] bc40: c1302684 20000093 00000000 00000001 c12082c0 c1302684 c12082c0 ee041500 [ 2.600671] bc60: c1302574 00000000 c12082c0 00000000 00000002 eefc93a4 c03ae5dc 20000013 [ 2.609231] bc80: ffffffff ee05bcc4 ee05bd2c c030c420 c113d27c ee05bd2c ee05bd28 1f77defd [ 2.617788] bca0: 00013034 c0208000 c0d97b10 0001351d ee05bd2c ee05bd28 ee05be88 c0c1ceac [ 2.626348] bcc0: 00013021 ee05bce0 c113d5e8 c03ae5dc 20000013 ffffffff 00000051 00000001 [ 2.634902] bce0: 00000000 ee05bd51 ee05bd24 c113d27c ee05bd2c c03aecb0 ee05bd51 c113d27c [ 2.643455] bd00: 00000000 00000000 00000000 00000002 ee05be88 c03aed5c ee05bd51 ee06c328 [ 2.652025] bd20: ee600b08 ee600b00 eefcd300 c0369f50 ffff0a00 ee05bd51 00000000 00000000 [ 2.660583] bd40: ffffffff c0593d90 00000000 eefcd770 00000000 ee06c080 00001a12 eefcd2c0 [ 2.669141] bd60: ee06c000 c12082c0 c12082c0 ee06c328 2ddc5000 eefcd2c0 ffffffff ee688000 [ 2.677697] bd80: 00000000 ee2b4fc0 ee688018 eefcd2c0 ee06c000 ee600a80 00000000 c1339cc8 [ 2.686256] bda0: 2ddc5000 c1302684 ee05bdf4 c0b513b4 ee05a000 ffffffff 00000000 00000000 [ 2.694818] bdc0: 00000063 eefcd2c0 c0b517a8 00000000 ee600b00 ee05a000 ee05a000 ee05beb4 [ 2.703381] bde0: 00000002 00000000 00000000 7fffffff ee05be04 c0b517a8 7fffffff ee05a000 [ 2.711944] be00: 00000000 c0b541a8 c12082c0 c12082c0 2ddc5000 ee06c000 eefcd2c0 eefcd2c0 [ 2.720505] be20: 00000010 c12082c0 ffffffff ee05beb0 00000000 00000000 c113d27c c05961a8 [ 2.729074] be40: 00000000 ffffff05 ffff0a00 c0ee0c2a ee06c000 c03636bc 00000000 c0ee0c28 [ 2.737638] be60: ee05befc 00000000 c0ee0c2a 00000002 ee05be88 c05964f8 ffffff05 ffff0a00 [ 2.746203] be80: 00000000 00000000 ffffff05 ffff0a00 00000000 ee05bef8 c1410000 c0ee0c28 [ 2.754765] bea0: c113d27c 024000c0 c05980c4 00000008 00000000 c0597fcc ee05beb8 ee05beb8 [ 2.763321] bec0: 00000118 ee05bef8 c144fcf4 c1410000 c1410000 c1203220 c113d27c 00000000 [ 2.771877] bee0: 00000118 c05980c4 00000000 ee05bef8 c0301e20 c0ee0c28 c113d27c ee05a000 [ 2.780435] bf00: 00000000 cccccccd 00000000 c0464d8c c0c0b400 ee132880 00000000 c133659c [ 2.788996] bf20: c101e86c c0c1ceac 00000118 c035b858 c0eca2c8 c101d28c 00000000 00000007 [ 2.797564] bf40: 00000007 c0ee0918 c1336584 c1410000 c1410000 c1410000 c1410000 c1203220 [ 2.806117] bf60: c11a3838 c11a383c 00000118 c1100db0 00000007 00000007 00000000 c11005ac [ 2.814679] bf80: 00000000 00000000 c0b4fc1c 00000000 00000000 00000000 00000000 00000000 [ 2.823246] bfa0: 00000000 c0b4fc24 00000000 c0307d38 00000000 00000000 00000000 00000000 [ 2.831808] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.840367] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 0898c0c5 e9d998e8 [ 2.848927] [<c058a568>] (memcpy) from [<0000000e>] (0xe) [ 2.854578] Code: ba000002 f5d1f03c f5d1f05c f5d1f07c (e8b151f8) [ 2.860952] ---[ end trace f19d392f4840c27b ]---

[PYBOOT] [omap5uevm 02:12]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:13]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:15]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.741235] 7e00: ee0c68d0 00000001 00000000 c2009c40 ee6f1d90 00000000 ee6f64c0 ee6f614c [ 2.749789] 7e20: ee6f6500 ee189240 ee6f62c0 c05c5478 ee6f6140 c143b968 024080c0 c0f09c20 [ 2.758345] 7e40: c1341ea4 c1341edc ee19da10 ee19da10 ee6f6110 ee19da10 c13c4f5c ee5aba00 [ 2.766906] 7e60: 0000000f ee00b000 ee03ec00 c05c55cc ee19da10 ee6f60d0 c144fcfc c07985cc [ 2.775464] 7e80: ee19da10 c144fcf4 c144fcfc c077ae38 00000000 ee087ec8 c077b124 00000001 [ 2.784028] 7ea0: ee5aba00 00000000 ee00b000 c07793dc ee03fb70 ee0cbc38 ee19da10 ee19da44 [ 2.792586] 7ec0: c13a29c0 c077acd4 ee19da10 00000001 2ddd1000 ee19da10 ee19da10 c13a29c0 [ 2.801140] 7ee0: c13a27e0 c077a1b8 ee19da10 c13a27c0 c13a27c0 c077a644 c13a27f4 ee03ec00 [ 2.809689] 7f00: ee00b000 00000000 ee5aba00 c0356718 c1302100 ee00b018 ee00b000 ee03ec18 [ 2.818238] 7f20: 00000088 c1302100 ee00b018 ee086000 ee00b000 c0357384 ee00b168 00000000 [ 2.826806] 7f40: c035734c 00000000 ee03dc40 ee03ec00 c035734c 00000000 00000000 00000000 [ 2.835370] 7f60: 00000000 c035c140 00000001 00000000 42480427 ee03ec00 00000000 00000000 [ 2.843937] 7f80: ee087f80 ee087f80 00000001 00010001 ee087f90 ee087f90 ee03dc40 ee03dc40 [ 2.852486] 7fa0: c035c064 00000000 00000000 c0307d38 00000000 00000000 00000000 00000000 [ 2.861044] 7fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.869590] 7fe0: 00000000 00000000 00000000 00000000 00000013 00000000 3015c023 71808600 [ 2.878152] [<c035c568>] (kthread_data) from [<c0357968>] (wq_worker_sleeping+0x8/0xd0) [ 2.886538] [<c0357968>] (wq_worker_sleeping) from [<c0b51554>] (__schedule+0x380/0x590) [ 2.895006] [<c0b51554>] (__schedule) from [<c0b517a8>] (schedule+0x44/0x9c) [ 2.902388] [<c0b517a8>] (schedule) from [<c034386c>] (do_exit+0x678/0xa18) [ 2.909678] [<c034386c>] (do_exit) from [<c030bd7c>] (die+0x410/0x474) [ 2.916510] [<c030bd7c>] (die) from [<c031cb9c>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 2.924804] [<c031cb9c>] (__do_kernel_fault.part.0) from [<c0317c10>] (do_page_fault+0x370/0x384) [ 2.934096] [<c0317c10>] (do_page_fault) from [<c030137c>] (do_PrefetchAbort+0x38/0x9c) [ 2.942465] [<c030137c>] (do_PrefetchAbort) from [<c030c58c>] (__pabt_svc+0x4c/0x80) [ 2.950573] Exception stack(0xee087d88 to 0xee087dd0) [ 2.955854] 7d80: ee370810 00000005 0000006d c05d1c2c 00000005 ee365900 [ 2.964412] 7da0: 00000005 eefe6d44 0000000e ee6f6500 ee6f1d90 00000000 ed809160 ee087dd8 [ 2.972968] 7dc0: c05d1c38 0000006c 20000033 ffffffff [ 2.978257] [<c030c58c>] (__pabt_svc) from [<0000006c>] (0x6c) [ 2.984362] Code: ebff888a e1a00006 e8bd81f0 e59032f8 (e5130014) [ 2.990735] ---[ end trace 5f773ed0a5361831 ]--- [ 2.995559] Fixing recursive fault but reboot is needed!

[PYBOOT] [omap5uevm 02:08]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:09]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:11]: Done. Board omap5uevm-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 2.533317] 1f20: c0e83b8c c0b1c0ac 000000fc c034d284 c0d45358 c0e827dc 00000000 00000007 [ 2.541880] 1f40: 00000007 c0d58cb4 00000000 c1101000 c1101000 c1101000 c1101000 000000fc [ 2.550443] 1f60: c0f88834 c0f88838 c0fe4dd4 c0f00d7c 00000007 00000007 00000000 c0f005ac [ 2.559003] 1f80: 00000000 00000000 c0a8d408 00000000 00000000 00000000 00000000 00000000 [ 2.567565] 1fa0: 00000000 c0a8d410 00000000 c0307998 00000000 00000000 00000000 00000000 [ 2.576132] 1fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.584692] 1fe0: 00000000 00000000 00000000 00000000 00000013 00000000 08b8c0e0 2d9940a1 [ 2.593260] [<c036b6ec>] (run_timer_softirq) from [<c0338a3c>] (__do_softirq+0xac/0x214) [ 2.601730] [<c0338a3c>] (__do_softirq) from [<c0338e40>] (irq_exit+0xd8/0x10c) [ 2.609388] [<c0338e40>] (irq_exit) from [<c0361ba8>] (__handle_domain_irq+0x58/0xa8) [ 2.617592] [<c0361ba8>] (__handle_domain_irq) from [<c0301620>] (gic_handle_irq+0x54/0x88) [ 2.626336] [<c0301620>] (gic_handle_irq) from [<c030bcd4>] (__irq_svc+0x54/0x70) [ 2.634174] Exception stack(0xee071ca8 to 0xee071cf0) [ 2.639458] 1ca0: 00000000 c11026a8 00000280 00000000 c11011dc ee071e68 [ 2.648013] 1cc0: 60000113 0000000b 00000001 c05606cc c05606ca 00000000 00000000 ee071cf8 [ 2.656577] 1ce0: c030b3a0 c030b3b8 60000113 ffffffff [ 2.661872] [<c030bcd4>] (__irq_svc) from [<c030b3b8>] (die+0x11c/0x394) [ 2.668890] [<c030b3b8>] (die) from [<c031a290>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 2.677179] [<c031a290>] (__do_kernel_fault.part.0) from [<c0315580>] (do_page_fault+0x370/0x384) [ 2.686464] [<c0315580>] (do_page_fault) from [<c030125c>] (do_DataAbort+0x3c/0xb8) [ 2.694484] [<c030125c>] (do_DataAbort) from [<c030bc60>] (__dabt_svc+0x40/0x60) [ 2.702218] Exception stack(0xee071e68 to 0xee071eb0) [ 2.707506] 1e60: c0b20924 c200cffc 00000000 a60c018a c0b205f0 c200020c [ 2.716069] 1e80: 4d043b08 322e798f 00001410 00001810 00001010 00001c10 e7aba42b ee071eb8 [ 2.724628] 1ea0: 00000000 c05606c8 20000013 ffffffff [ 2.729913] [<c030bc60>] (__dabt_svc) from [<c05606c8>] (crc32_be+0xd8/0x184) [ 2.737387] [<c05606c8>] (crc32_be) from [<c0f40e3c>] (of_fdt_raw_init+0x2c/0x74) [ 2.745216] [<c0f40e3c>] (of_fdt_raw_init) from [<c0301c34>] (do_one_initcall+0x90/0x1d4) [ 2.753783] [<c0301c34>] (do_one_initcall) from [<c0f00d7c>] (kernel_init_freeable+0x134/0x1c4) [ 2.762893] [<c0f00d7c>] (kernel_init_freeable) from [<c0a8d410>] (kernel_init+0x8/0x110) [ 2.771450] [<c0a8d410>] (kernel_init) from [<c0307998>] (ret_from_fork+0x14/0x3c) [ 2.779378] Code: e7973106 e3530000 128d2004 15832004 (e7875106) [ 2.785758] ---[ end trace cb88537fdc8fa202 ]--- [ 2.790582] Kernel panic - not syncing: Fatal exception in interrupt [ 2.797237] ---[ end Kernel panic - not syncing: Fatal exception in interrupt

[PYBOOT] [omap5uevm 00:57]: got exception: panic ~$off

[PYBOOT] [omap5uevm 00:58]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.656969] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.667447] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.673924] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.679346] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.687820] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.699611] mmc2: switch to bus width 8 failed [ 1.704162] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.710798] mmc2: switch to bus width 4 failed [ 1.715309] mmc2: new high speed MMC card at address 0001 [ 1.715652] hub 3-0:1.0: USB hub found [ 1.715706] hub 3-0:1.0: 1 port detected [ 1.729063] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.735093] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.741736] [drm] No driver support for vblank timestamp query. [ 1.748030] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.754350] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.761767] mmcblk2: p3 [ 1.772735] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.786654] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.795096] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.802453] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.821647] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.826089] mmc0: new SDIO card at address 0001 [ 1.847091] Console: switching to colour frame buffer device 170x48 [ 1.891274] drm drm: fb0: frame buffer device [ 1.908526] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.915322] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.922389] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.936685] vdd_1v5: disabling [ 1.939774] vdd_1v2: disabling [ 2.561823] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.573299] Waiting for root device /dev/mmcblk0p3... [ 58.504007] random: nonblocking pool is initialized

[PYBOOT] [seaboard 01:52]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:53]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:54]: Done. Board seaboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.606958] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.613290] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.623214] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.629663] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.635075] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.642833] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.658110] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.664592] hub 3-0:1.0: USB hub found [ 1.668438] hub 3-0:1.0: 1 port detected [ 1.678975] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.685594] [drm] No driver support for vblank timestamp query. [ 1.692439] mmc2: switch to bus width 8 failed [ 1.697129] mmc2: switch to bus width 4 failed [ 1.701605] mmc2: new high speed MMC card at address 0001 [ 1.707319] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.719420] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.725783] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.727035] mmcblk2: p3 [ 1.741501] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.749067] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.751795] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.758758] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.781529] Console: switching to colour frame buffer device 170x48 [ 1.829633] drm drm: fb0: frame buffer device [ 1.834106] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.840507] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.847387] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.858974] vdd_1v5: disabling [ 1.862039] vdd_1v2: disabling [ 1.868524] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.877040] mmc0: new SDIO card at address 0001 [ 2.552301] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.563154] Waiting for root device /dev/mmcblk0p3...

[PYBOOT] [seaboard 01:46]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:47]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:48]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------

[ 1.660036] Bluetooth: RFCOMM ver 1.11 [ 1.663924] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 1.669319] Bluetooth: BNEP socket layer initialized [ 1.674310] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 1.680268] Bluetooth: HIDP socket layer initialized [ 1.685862] Key type dns_resolver registered [ 1.691360] Registering SWP/SWPB emulation handler [ 1.707122] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.713911] VDDIO_HDMI: supplied by vdd_5v0 [ 1.718368] vdd_sys: supplied by vdd_5v0 [ 1.722410] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 1.727369] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.733957] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.744462] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.750921] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.756983] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.764981] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.781454] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.789854] hub 3-0:1.0: USB hub found [ 1.793663] hub 3-0:1.0: 1 port detected [ 1.805168] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.811789] [drm] No driver support for vblank timestamp query. [ 1.908985] Console: switching to colour frame buffer device 170x48 [ 1.928762] drm drm: fb0: frame buffer device [ 1.961444] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.968718] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 1.976418] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.996807] vdd_1v5: disabling [ 1.999889] vdd_1v2: disabling [ 2.003090] ALSA device list: [ 2.006050] #0: NVIDIA Tegra Seaboard [ 2.311480] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.322749] Waiting for root device /dev/mmcblk0p3...

[PYBOOT] [seaboard 01:47]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:48]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:49]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 3.127093] EXT4-fs (mmcblk0p3): warning: mounting fs with errors, running e2fsck is recommended [ 3.135446] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 4.172774] random: dd urandom read with 57 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

Cannot find device "eth0" Bind socket to interface: No such device Failed to bring up eth0. [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[ ok 8[?25h[?0c. [....] Starting web server: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [?25l[?1c7[ ok 8[?25h[?0c. [....] Starting periodic command scheduler: cron[?25l[?1c7[ ok 8[?25h[?0c. [....] Starting system message bus: dbus[?25l[?1c7[ ok 8[?25h[?0c. [....] Loading cpufreq kernel modules...[?25l[?1c7[ ok 8[?25h[?0cdone (none). [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[ ok 8[?25h[?0c.

[PYBOOT] [snow 03:11]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snow 03:12]: got exception: timeout ~$off

[PYBOOT] [snow 03:13]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.953857] can: controller area network core (rev 20120528 abi 9) [ 1.960113] NET: Registered protocol family 29 [ 1.964569] can: raw protocol (rev 20120528) [ 1.968841] can: broadcast manager protocol (rev 20120528 t) [ 1.974517] can: netlink gateway (rev 20130117) max_hops=1 [ 1.980560] Key type dns_resolver registered [ 1.985076] ThumbEE CPU extension supported. [ 1.989379] Registering SWP/SWPB emulation handler [ 2.000244] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.007110] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.016357] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.023376] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.030364] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.037353] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.051300] db8500-esram12: disabling [ 2.055084] db8500-esram34: disabling [ 2.059112] V-CSI/DSI: disabling [ 2.062408] mmci-reg: disabling [ 2.066162] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.072143] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.078582] Waiting for root device /dev/mmcblk0p4... [ 2.115722] mmc3: new high speed MMC card at address 0001 [ 2.121734] mmcblk3: mmc3:0001 3.53 GiB [ 2.126007] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.131652] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.137298] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.143829] mmcblk3: p1 p2 p3 p4 cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.

Disconnected.

[PYBOOT] [snowball 02:12]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:13]: got exception: timeout ~$off

[PYBOOT] [snowball 02:15]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.897888] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.905364] ledtrig-cpu: registered to indicate activity on CPUs [ 1.911621] usbcore: registered new interface driver usbhid [ 1.917205] usbhid: USB HID core driver [ 1.924438] NET: Registered protocol family 10 [ 1.979766] sit: IPv6 over IPv4 tunneling driver [ 1.984924] NET: Registered protocol family 17 [ 1.989410] can: controller area network core (rev 20120528 abi 9) [ 1.995635] NET: Registered protocol family 29 [ 2.000061] can: raw protocol (rev 20120528) [ 2.004364] can: broadcast manager protocol (rev 20120528 t) [ 2.010009] can: netlink gateway (rev 20130117) max_hops=1 [ 2.015930] Key type dns_resolver registered [ 2.020385] ThumbEE CPU extension supported. [ 2.074737] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.089416] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.098510] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.105499] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.112487] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.119476] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.131134] db8500-esram12: disabling [ 2.178924] db8500-esram34: disabling [ 2.208679] V-CSI/DSI: disabling [ 2.212921] mmci-reg: disabling [ 2.224517] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.230468] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.244659] Waiting for root device /dev/mmcblk0p4... [ 3.040740] mmc3: new high speed MMC card at address 0001 [ 3.054565] mmcblk3: mmc3:0001 3.53 GiB [ 3.063720] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 3.074249] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 3.079742] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 3.095550] mmcblk3: p1 p2 p3 p4

[PYBOOT] [snowball 01:57]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 01:58]: got exception: timeout ~$off

[PYBOOT] [snowball 01:59]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------

[ 2.632843] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.643707] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.660400] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.671264] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.705108] NET: Registered protocol family 10 [ 2.713104] sit: IPv6 over IPv4 tunneling driver [ 2.720001] NET: Registered protocol family 17 [ 2.724945] NET: Registered protocol family 35 [ 2.729736] NET: Registered protocol family 37 [ 2.734680] Registering SWP/SWPB emulation handler [ 2.752075] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.758209] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.765289] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.772430] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-13 14:19:38 UTC (955635578) [ 2.781707] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.788696] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.795776] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.802825] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.816925] db8500-esram12: disabling [ 2.820800] db8500-esram34: disabling [ 2.824829] V-CSI/DSI: disabling [ 2.828124] mmci-reg: disabling [ 2.831481] ALSA device list: [ 2.834442] #0: MOP500-card [ 2.837799] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.843841] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.850067] Waiting for root device /dev/mmcblk0p4... Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.

Disconnected.

[PYBOOT] [snowball 01:53]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 01:54]: got exception: timeout ~$off

[PYBOOT] [snowball 01:55]: Done. Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

[ 20.097213] mmcblk0: error -110 sending status command, aborting [ 20.108284] mmcblk0: error -110 sending status command, retrying [ 20.116713] mmcblk0: error -110 sending status command, retrying [ 20.125145] mmcblk0: error -110 sending status command, aborting [ 20.136166] mmcblk0: error -110 sending status command, retrying [ 20.144606] mmcblk0: error -110 sending status command, retrying [ 20.153036] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/gett[ 20.164247] mmcblk0: error -110 sending status command, retrying y" [ 20.173043] mmcblk0: error -110 sending status command, retrying [ 20.181532] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty"INIT: cannot execute "/sbin/getty[ 20.193429] mmcblk0: error -110 sending status command, retrying " INIT: Id "3" respawning too [ 20.204684] mmcblk0: error -110 sending status command, retrying fast: disabled for 5 minutes [ 20.213491] mmcblk0: error -110 sending status command, aborting [ 20.224882] mmcblk0: error -110 sending status command, retrying [ 20.233303] mmcblk0: error -110 sending status command, retrying [ 20.242018] mmcblk0: error -110 sending status command, aborting [ 20.253102] mmcblk0: error -110 sending status command, retrying [ 20.261562] mmcblk0: error -110 sending status command, retrying [ 20.270022] mmcblk0: error -110 sending status command, aborting INIT: INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty"INIT: INIT: INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty" cannot execute "/sbin/getty" INIT: Id "4" respawning too fast: disabled for 5 minutes INIT: Id "2" respawning too fast: disabled for 5 minutes INIT: Id "6" respawning too fast: disabled for 5 minutes INIT: Id "S1" respawning too fast: disabled for 5 minutes INIT: Id "1" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 52.384897] random: nonblocking pool is initialized

[PYBOOT] [wandboard 02:55]: Timed out waiting for "<type 'str'>":

[PYBOOT] [wandboard 02:56]: got exception: timeout ~$off

[PYBOOT] [wandboard 02:57]: Done.