Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20160428/
Failed boards:
arndale arm-multi_v7_nosmp_defconfig : FAILED 1:02.14 bbb arm-omap2plus_defconfig : FAILED 1:53.92 bbb arm-multi_v7_defconfig : FAILED 1:54.90 bbb arm-multi_v7_nosmp_defconfig : FAILED 2:07.85 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:48.43 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:46.42 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:46.75 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 1:51.56 beaver arm-tegra_defconfig : FAILED 1:47.68 beaver arm-multi_v7_defconfig : FAILED 1:50.98 beaver arm-multi_v7_nosmp_defconfig : FAILED 1:48.69 cosmic arm-imx_v6_v7_defconfig : FAILED 2:02.06 cosmic arm-multi_v7_defconfig : FAILED 2:13.82 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:04.03 dalmore arm-tegra_defconfig : FAILED 1:54.35 dalmore arm-multi_v7_defconfig : FAILED 2:00.97 dalmore arm-multi_lpae_defconfig : FAILED 2:10.45 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:54.62 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:57.10 omap5uevm arm-omap2plus_defconfig : FAILED 2:04.90 omap5uevm arm-multi_v7_defconfig : FAILED 2:13.73 omap5uevm arm-multi_lpae_defconfig : FAILED 2:15.11 omap5uevm arm-multi_v7_nosmp_defconfig : FAILED 2:03.87 pi arm-multi_v7_defconfig : FAILED 1:55.85 pi arm-multi_lpae_defconfig : FAILED 2:39.59 seaboard arm-tegra_defconfig : FAILED 1:54.70 seaboard arm-multi_v7_defconfig : FAILED 1:59.86 seaboard arm-multi_v7_nosmp_defconfig : FAILED 1:55.28 snow arm-multi_v7_nosmp_defconfig : FAILED 0:52.13 snowball arm-u8500_defconfig : FAILED 1:59.39 snowball arm-multi_v7_defconfig : FAILED 2:16.89 snowball arm-multi_v7_nosmp_defconfig : FAILED 2:00.40 wandboard arm-imx_v6_v7_defconfig : FAILED 3:01.47
Successful boards:
apc arm-vt8500_v6_v7_defconfig : passed 1:17.40 arndale arm-exynos_defconfig : passed 1:28.00 arndale arm-multi_v7_defconfig : passed 2:00.72 arndale arm-multi_lpae_defconfig : passed 1:30.77 capri arm-bcm_defconfig : passed 0:45.90 capri arm-multi_v7_defconfig : passed 1:01.91 capri arm-multi_v7_nosmp_defconfig : warnings 0:50.42 chitra powerpc-pasemi_defconfig : passed 2:02.11 chitra powerpc-ppc64_defconfig : passed 3:01.84 colombus arm-sunxi_defconfig : passed 1:03.73 colombus arm-multi_v7_defconfig : passed 1:26.42 colombus arm-multi_lpae_defconfig : passed 1:15.42 colombus arm-multi_v7_nosmp_defconfig : warnings 3:22.94 cubie arm-sunxi_defconfig : passed 0:50.19 cubie arm-multi_v7_defconfig : passed 0:54.94 cubie arm-multi_v7_nosmp_defconfig : passed 0:50.89 cubie2 arm-sunxi_defconfig : passed 0:42.29 cubie2 arm-multi_v7_defconfig : passed 0:44.51 cubie2 arm-multi_lpae_defconfig : passed 0:44.24 cubie2 arm-multi_v7_nosmp_defconfig : warnings 0:57.47 cubox arm-multi_v7_defconfig : passed 1:16.86 cubox arm-mvebu_v7_defconfig : passed 1:20.53 cubox arm-multi_v7_nosmp_defconfig : passed 1:18.13 hummingboard arm-imx_v6_v7_defconfig : passed 1:06.99 hummingboard arm-multi_v7_defconfig : passed 1:06.07 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:05.21 jetsontk1 arm-tegra_defconfig : warnings 0:49.67 jetsontk1 arm-multi_v7_defconfig : warnings 0:46.35 jetsontk1 arm-multi_lpae_defconfig : warnings 0:56.72 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:43.80 pandaes arm-omap2plus_defconfig : warnings 1:48.52 pandaes arm-multi_v7_defconfig : passed 1:37.43 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:52.74 pi arm-exynos_defconfig : passed 2:14.62 pi arm-multi_v7_nosmp_defconfig : warnings 2:06.97 pit arm-exynos_defconfig : passed 2:13.30 pit arm-multi_v7_defconfig : passed 2:17.05 pit arm-multi_lpae_defconfig : passed 2:30.94 pit arm-multi_v7_nosmp_defconfig : warnings 2:09.12 seattle arm64-defconfig : passed 2:18.55 snow arm-exynos_defconfig : passed 2:07.76 snow arm-multi_v7_defconfig : passed 2:10.62 snow arm-multi_lpae_defconfig : passed 1:58.99 trimslice arm-tegra_defconfig : warnings 1:36.11 trimslice arm-multi_v7_defconfig : warnings 1:43.71 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:48.30 wandboard arm-multi_v7_defconfig : passed 0:45.93 wandboard arm-multi_v7_nosmp_defconfig : warnings 0:56.35
Offline boards:
colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:15.48 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:21.35 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 1:21.54 parallella arm-multi_v7_defconfig : OFFLINE 2:25.19 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:21.51 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:53.61 rk3288evb arm-multi_lpae_defconfig : OFFLINE 0:49.67 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:56.40 sama5 arm-sama5_defconfig : OFFLINE 2:17.05 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:28.97 socfpga arm-socfpga_defconfig : OFFLINE 2:16.50 socfpga arm-multi_v7_defconfig : OFFLINE 3:07.54 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:11.97
Board legend is available at http://arm-soc.lixom.net/boards.html
Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
Key type dns_resolver registered ThumbEE CPU extension supported. ahci 122f0000.sata: couldn't get PHY in node sata: -517 input: gpio_keys as /devices/platform/gpio_keys/input/input0 hctosys: unable to open rtc device (rtc0) MAIN_DC: disabling hdmi-en: disabling ahci 122f0000.sata: couldn't get PHY in node sata: -517 Unable to handle kernel paging request at virtual address c10b3618 pgd = c0204000 [c10b3618] *pgd=4100041e(bad) Internal error: Oops: 8000000d [#1] ARM Modules linked in: CPU: 0 PID: 0 Comm: swapper Tainted: G W 4.6.0-rc5-next-20160428 #1 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) task: c1005f30 ti: c1000000 task.ti: c1000000 PC is at 0xc10b3618 LR is at 0x0 pc : [<c10b3618>] lr : [<00000000>] psr: 600001d3 sp : c1001f88 ip : 00000000 fp : c10b40d8 r10: 00000000 r9 : 00000000 r8 : 68bf5db1 r7 : 00000001 r6 : c10b4178 r5 : c10b3620 r4 : c100212c r3 : 00010000 r2 : 00000006 r1 : 00000006 r0 : 00000001 Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none Control: 10c53c7d Table: 40204059 DAC: 00000051 Process swapper (pid: 0, stack limit = 0xc1000218) Stack: (0xc1001f88 to 0xc1002000) 1f80: c1002134 c10fe055 c1001fa4 c0a9638c c1035f80 c1000000 1fa0: c1001fac c0a9658c c10b40d8 c0358000 00000001 ffffffff 00000000 c0f00c44 1fc0: ffffffff ffffffff 00000000 c0f0068c 00000000 c0f8ba20 c11001d4 c10020b4 1fe0: c0f8ba1c c10070f8 40204059 410fc0f4 00000000 40208078 00000000 00000000 Code: 00000000 00000000 00000000 00000000 (c10b3620) ---[ end trace cb88537fdc8fa202 ]--- Kernel panic - not syncing: Attempted to kill the idle task! ---[ end Kernel panic - not syncing: Attempted to kill the idle task!
[PYBOOT] [arndale 01:00]: got exception: panic ~$off
[PYBOOT] [arndale 01:01]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.560802] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.626472] Synopsys Designware Multimedia Card Interface Driver [ 1.634346] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.644292] ledtrig-cpu: registered to indicate activity on CPUs [ 1.651517] usbcore: registered new interface driver usbhid [ 1.657449] usbhid: USB HID core driver [ 1.669509] NET: Registered protocol family 10 [ 1.676014] sit: IPv6 over IPv4 tunneling driver [ 1.682136] NET: Registered protocol family 17 [ 1.686888] can: controller area network core (rev 20120528 abi 9) [ 1.693535] NET: Registered protocol family 29 [ 1.698243] can: raw protocol (rev 20120528) [ 1.702763] can: broadcast manager protocol (rev 20120528 t) [ 1.708758] can: netlink gateway (rev 20130117) max_hops=1 [ 1.715512] Key type dns_resolver registered [ 1.720386] omap_voltage_late_init: Voltage driver support not added [ 1.727353] ThumbEE CPU extension supported. [ 1.731907] Registering SWP/SWPB emulation handler [ 1.776544] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.783098] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.790845] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.799565] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.807498] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.815391] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.823219] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.830583] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.837663] hctosys: unable to open rtc device (rtc0) [ 1.851162] Waiting for root device /dev/mmcblk0p2... [ 1.856944] mmc1: new high speed MMC card at address 0001 [ 1.863727] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.869019] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.875687] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.884301] mmcblk1: p1 p2
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:54]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman omap_hsmmc 48060000.mmc: Got CD GPIO Synopsys Designware Multimedia Card Interface Driver sdhci-pltfm: SDHCI platform and OF driver helper ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 Key type dns_resolver registered omap_voltage_late_init: Voltage driver support not added ThumbEE CPU extension supported. at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz hctosys: unable to open rtc device (rtc0) Waiting for root device /dev/mmcblk0p2... mmc1: new high speed MMC card at address 0001 mmcblk1: mmc1:0001 MMC02G 1.79 GiB mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB mmcblk1: p1 p2
[PYBOOT] [bbb 02:04]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 02:05]: got exception: timeout ~$off
[PYBOOT] [bbb 02:07]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 2.066121] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.072253] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.078592] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.085478] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.095088] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.104601] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.111629] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.154795] ledtrig-cpu: registered to indicate activity on CPUs [ 2.163502] oprofile: using arm/armv7 [ 2.168519] Initializing XFRM netlink socket [ 2.173651] NET: Registered protocol family 10 [ 2.184414] sit: IPv6 over IPv4 tunneling driver [ 2.193265] NET: Registered protocol family 17 [ 2.198210] NET: Registered protocol family 15 [ 2.203447] Key type dns_resolver registered [ 2.208307] omap_voltage_late_init: Voltage driver support not added [ 2.215058] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.223538] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.233166] ThumbEE CPU extension supported. [ 2.237804] Registering SWP/SWPB emulation handler [ 2.242834] SmartReflex Class3 initialized [ 2.315504] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.322746] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.333511] mmc1: new high speed MMC card at address 0001 [ 2.346704] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.355170] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.362893] hctosys: unable to open rtc device (rtc0) [ 2.368358] sr_init: No PMIC hook to init smartreflex [ 2.374183] sr_init: platform driver register failed for SR [ 2.414767] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.422882] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.437624] mmcblk1: p1 p2 [ 2.455745] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [bbb 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [bbb 01:52]: got exception: timeout ~$off
[PYBOOT] [bbb 01:53]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.180667] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 2.195469] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.202540] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.225340] rtc-ds1307 2-006f: SET TIME! [ 2.231074] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.237833] rtc-ds1307 2-006f: 64 bytes nvram [ 2.242439] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.250635] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.256413] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.264655] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.273822] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.280699] hub 1-0:1.0: USB hub found [ 2.284651] hub 1-0:1.0: 1 port detected [ 2.289056] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.294837] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.302933] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.311951] hub 2-0:1.0: USB hub found [ 2.315927] hub 2-0:1.0: 1 port detected [ 2.321975] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.386476] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.404558] aic_dvdd_fixed: disabling [ 2.409248] Waiting for root device /dev/mmcblk0p1... [ 2.436912] mmc1: new high speed MMC card at address 0001 [ 2.442942] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.447847] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.454198] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.461117] mmcblk1: p1 [ 2.594848] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.629878] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.655066] hub 2-1:1.0: USB hub found [ 2.659035] hub 2-1:1.0: 4 ports detected [ 2.751067] hub 1-1:1.0: USB hub found [ 2.755048] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:44]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:45]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.190521] palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 [ 2.205291] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 2.212359] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.234987] rtc-ds1307 2-006f: SET TIME! [ 2.240710] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 2.247458] rtc-ds1307 2-006f: 64 bytes nvram [ 2.252069] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 2.260266] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.266041] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.274273] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 2.283426] xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 [ 2.290299] hub 1-0:1.0: USB hub found [ 2.294245] hub 1-0:1.0: 1 port detected [ 2.298640] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.304408] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 2.312509] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.321521] hub 2-0:1.0: USB hub found [ 2.325480] hub 2-0:1.0: 1 port detected [ 2.331570] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.395997] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 2.414094] aic_dvdd_fixed: disabling [ 2.418789] Waiting for root device /dev/mmcblk0p1... [ 2.451581] mmc1: new high speed MMC card at address 0001 [ 2.457604] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.462515] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.468861] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.475780] mmcblk1: p1 [ 2.604495] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.639524] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.664690] hub 2-1:1.0: USB hub found [ 2.668661] hub 2-1:1.0: 4 ports detected [ 2.760638] hub 1-1:1.0: USB hub found [ 2.764615] hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:43]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:44]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:45]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
palmas-rtc 48070000.i2c:tps659038@58:tps659038_rtc: rtc core: registered 48070000.i2c:tps659 as rtc1 at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz rtc-ds1307 2-006f: SET TIME! rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 rtc-ds1307 2-006f: 64 bytes nvram omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz xhci-hcd xhci-hcd.0.auto: xHCI Host Controller xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 xhci-hcd xhci-hcd.0.auto: irq 410, io mem 0x48890000 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected xhci-hcd xhci-hcd.0.auto: xHCI Host Controller xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected omap_hsmmc 4809c000.mmc: Got CD GPIO rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) aic_dvdd_fixed: disabling Waiting for root device /dev/mmcblk0p1... mmc1: new high speed MMC card at address 0001 mmcblk1: mmc1:0001 S10004 3.56 GiB mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB mmcblk1: p1 usb 1-1: new high-speed USB device number 2 using xhci-hcd usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd hub 2-1:1.0: USB hub found hub 2-1:1.0: 4 ports detected hub 1-1:1.0: USB hub found hub 1-1:1.0: 4 ports detected
[PYBOOT] [beagleboard-x15 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:49]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:51]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 4.298650] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 4.304944] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.311833] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 4.322216] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 4.327079] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.333364] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.340231] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.349823] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.359318] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.366358] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.407717] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 4.414013] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 4.420886] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 4.430477] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 4.439954] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 4.447000] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 4.453121] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 4.459425] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 4.466267] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 4.475852] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 4.485353] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 4.492395] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 4.538010] hctosys: unable to open rtc device (rtc0) [ 4.543316] sr_init: No PMIC hook to init smartreflex [ 4.548871] sr_init: platform driver register failed for SR [ 4.596441] aic_dvdd_fixed: disabling [ 4.600673] ldousb: disabling [ 4.603930] mmc1: new high speed MMC card at address 0001 [ 4.612078] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 4.617538] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 4.624397] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 4.632923] mmcblk1: p1 [ 4.640508] Waiting for root device /dev/mmcblk0p1...
[PYBOOT] [beagleboard-x15 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beagleboard-x15 01:46]: got exception: timeout ~$off
[PYBOOT] [beagleboard-x15 01:48]: Done. Board beaver-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 3.288125] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 3.295081] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt [ 3.301601] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 3.308462] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 3.314046] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 3.321159] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf09f2000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 3.331160] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 3.343212] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 3.349829] [drm] No driver support for vblank timestamp query. [ 3.355764] drm drm: No connectors reported connected with modes [ 3.361770] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.387087] Console: switching to colour frame buffer device 128x48 [ 3.399373] drm drm: fb0: frame buffer device [ 3.418418] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.429287] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 3.435750] tegra-ehci 7d004000.usb: EHCI Host Controller [ 3.441162] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 3.449003] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 3.463428] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 3.470271] hub 1-0:1.0: USB hub found [ 3.474045] hub 1-0:1.0: 1 port detected [ 3.478997] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.484408] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 3.492148] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 3.503422] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 3.510179] hub 2-0:1.0: USB hub found [ 3.513949] hub 2-0:1.0: 1 port detected [ 3.523109] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 3.536675] vdd_sata,avdd_plle: disabling [ 3.541483] usb1_vbus: disabling [ 3.545545] Waiting for root device /dev/mmcblk0p1... [ 3.823429] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 4.762004] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:48]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:49]: got exception: timeout ~$off
[PYBOOT] [beaver 01:50]: Done. Board beaver-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt pci 0000:01:00.0: Signaling PME through PCIe PME interrupt pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:01:00.0: enabling device (0140 -> 0143) r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] No driver support for vblank timestamp query. drm drm: No connectors reported connected with modes [drm] Cannot find any crtc or sizes - going 1024x768 Console: switching to colour frame buffer device 128x48 drm drm: fb0: frame buffer device [drm] Initialized tegra 0.0.0 20120330 on minor 0 utmi_phy_clk_enable: timeout waiting for phy to stabilize tegra-ehci 7d004000.usb: EHCI Host Controller tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 1 port detected tegra-ehci 7d008000.usb: EHCI Host Controller tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 hub 2-0:1.0: USB hub found hub 2-0:1.0: 1 port detected tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) vdd_sata,avdd_plle: disabling usb1_vbus: disabling Waiting for root device /dev/mmcblk0p1... usb 2-1: new high-speed USB device number 2 using tegra-ehci asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:46]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:47]: got exception: timeout ~$off
[PYBOOT] [beaver 01:48]: Done. Board beaver-arm-tegra_defconfig failure log: -------------------------------------------------
[ 6.074268] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded [ 6.081225] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 6.086829] r8169 0000:01:00.0: enabling device (0140 -> 0143) [ 6.094376] r8169 0000:01:00.0 eth0: RTL8168evl/8111evl at 0xf087e000, 02:04:4b:01:60:99, XID 0c900800 IRQ 375 [ 6.104378] r8169 0000:01:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 6.117290] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 6.123932] [drm] No driver support for vblank timestamp query. [ 6.129929] drm drm: No connectors reported connected with modes [ 6.135962] [drm] Cannot find any crtc or sizes - going 1024x768 [ 6.161660] Console: switching to colour frame buffer device 128x48 [ 6.173482] drm drm: fb0: frame buffer device [ 6.200829] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 6.210174] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 6.216652] tegra-ehci 7d004000.usb: EHCI Host Controller [ 6.222084] tegra-ehci 7d004000.usb: new USB bus registered, assigned bus number 1 [ 6.230056] tegra-ehci 7d004000.usb: irq 343, io mem 0x7d004000 [ 6.250829] tegra-ehci 7d004000.usb: USB 2.0 started, EHCI 1.00 [ 6.258576] hub 1-0:1.0: USB hub found [ 6.262377] hub 1-0:1.0: 1 port detected [ 6.267207] tegra-ehci 7d008000.usb: EHCI Host Controller [ 6.272649] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 2 [ 6.280517] tegra-ehci 7d008000.usb: irq 344, io mem 0x7d008000 [ 6.300823] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.00 [ 6.308422] hub 2-0:1.0: USB hub found [ 6.312208] hub 2-0:1.0: 1 port detected [ 6.320467] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:02 UTC (946684802) [ 6.339284] vdd_sata,avdd_plle: disabling [ 6.343780] usb1_vbus: disabling [ 6.347191] ALSA device list: [ 6.350148] #0: NVIDIA Tegra Beaver [ 6.354405] Waiting for root device /dev/mmcblk0p1... [ 6.630829] usb 2-1: new high-speed USB device number 2 using tegra-ehci [ 7.616317] asix 2-1:1.0 eth1: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 58:6d:8f:50:ba:18
[PYBOOT] [beaver 01:45]: Timed out waiting for "<type 'str'>":
[PYBOOT] [beaver 01:46]: got exception: timeout ~$off
[PYBOOT] [beaver 01:47]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
[ 14.636500] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.710532] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.720848] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.794930] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.805242] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.879279] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.889601] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.963682] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.974005] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 35.048061] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 35.058380] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 39.132467] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 39.142783] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.216864] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.227172] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.301198] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.311510] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.385589] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.395899] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.469931] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.480245] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.554328] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.564716] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.638753] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.649065] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.723147] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.733463] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.807538] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.817851] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.891892] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.902207] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.976279] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.986595] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 01:59]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:00]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:01]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 14.047265] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.121243] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.131341] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.205322] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.215402] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.289384] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.299463] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.373442] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.383523] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.457505] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.467591] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.541573] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.551645] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.625635] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.635707] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.709685] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.719773] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.793760] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.803835] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.877815] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.887885] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.961863] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.971936] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.045914] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.055988] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.129966] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.140049] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.214033] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.224117] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.298136] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.308220] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.382204] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.392289] blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:11]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:12]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:13]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
blk_update_request: I/O error, dev mmcblk0, sector 3633185 mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633186 mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633187 mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633188 mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633189 mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633190 mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633191 mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633192 mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633193 mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633194 mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633195 mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633196 mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633197 mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633198 mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633199 mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633200 mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 blk_update_request: I/O error, dev mmcblk0, sector 3633201
[PYBOOT] [cosmic 02:00]: Timed out waiting for "<type 'str'>":
[PYBOOT] [cosmic 02:01]: got exception: timeout ~$off
[PYBOOT] [cosmic 02:03]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 2.764294] can: netlink gateway (rev 20130117) max_hops=1 [ 2.771265] Key type dns_resolver registered [ 2.777684] ThumbEE CPU extension supported. [ 2.782074] Registering SWP/SWPB emulation handler [ 2.799051] usb1_vbus: supplied by vdd-sys-5v0 [ 2.809585] usb2_vbus: supplied by vdd-sys-5v0 [ 2.828279] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.851032] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.857824] [drm] No driver support for vblank timestamp query. [ 2.880181] mmc1: new high speed MMC card at address 0001 [ 2.890746] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.896453] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.904922] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.913576] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.923607] mmcblk1: p1 [ 3.039514] Console: switching to colour frame buffer device 240x75 [ 3.127276] drm drm: fb0: frame buffer device [ 3.142037] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.157323] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.162952] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.171643] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.186969] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.197473] hub 1-0:1.0: USB hub found [ 3.201476] hub 1-0:1.0: 1 port detected [ 3.213010] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.228359] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.290670] dvdd_ts: disabling [ 3.293887] usb1_vbus: disabling [ 3.297188] vdd_cam_1v8_reg: disabling [ 3.304733] Waiting for root device /dev/mmcblk0p1... [ 3.512175] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.489482] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 47.502142] random: nonblocking pool is initialized
[PYBOOT] [dalmore 02:07]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 02:08]: got exception: timeout ~$off
[PYBOOT] [dalmore 02:09]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 2.782897] can: netlink gateway (rev 20130117) max_hops=1 [ 2.789907] Key type dns_resolver registered [ 2.796322] ThumbEE CPU extension supported. [ 2.800715] Registering SWP/SWPB emulation handler [ 2.816928] usb1_vbus: supplied by vdd-sys-5v0 [ 2.827837] usb2_vbus: supplied by vdd-sys-5v0 [ 2.847945] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.872546] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.879319] [drm] No driver support for vblank timestamp query. [ 2.901580] mmc1: new high speed MMC card at address 0001 [ 2.911838] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.918896] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.927591] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.937182] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.947856] mmcblk1: p1 [ 3.058782] Console: switching to colour frame buffer device 240x75 [ 3.146303] drm drm: fb0: frame buffer device [ 3.165481] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.180204] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.185782] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.194585] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.210386] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.220857] hub 1-0:1.0: USB hub found [ 3.224891] hub 1-0:1.0: 1 port detected [ 3.235551] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 3.250012] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.312213] dvdd_ts: disabling [ 3.315463] usb1_vbus: disabling [ 3.318725] vdd_cam_1v8_reg: disabling [ 3.326138] Waiting for root device /dev/mmcblk0p1... [ 3.540438] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.518330] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 59.500388] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:57]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:58]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:59]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 Key type dns_resolver registered ThumbEE CPU extension supported. usb1_vbus: supplied by vdd-sys-5v0 usb2_vbus: supplied by vdd-sys-5v0 VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] No driver support for vblank timestamp query. Console: switching to colour frame buffer device 240x75 drm drm: fb0: frame buffer device [drm] Initialized tegra 0.0.0 20120330 on minor 0 tegra-ehci 7d008000.usb: EHCI Host Controller tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 mmc1: new high speed MMC card at address 0001 tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 mmcblk1: mmc1:0001 SEM32G 29.1 GiB mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 hub 1-0:1.0: USB hub found mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB hub 1-0:1.0: 1 port detected mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB input: gpio-keys as /devices/soc0/gpio-keys/input/input0 mmcblk1: p1 palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) dvdd_ts: disabling usb1_vbus: disabling vdd_cam_1v8_reg: disabling Waiting for root device /dev/mmcblk0p1... usb 1-1: new high-speed USB device number 2 using tegra-ehci asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f
[PYBOOT] [dalmore 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:52]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:54]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------
[ 5.447653] Bluetooth: RFCOMM socket layer initialized [ 5.452879] Bluetooth: RFCOMM ver 1.11 [ 5.456728] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 5.462220] Bluetooth: BNEP socket layer initialized [ 5.467286] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 5.473285] Bluetooth: HIDP socket layer initialized [ 5.479663] Key type dns_resolver registered [ 5.489143] Registering SWP/SWPB emulation handler [ 5.505681] usb1_vbus: supplied by vdd-sys-5v0 [ 5.515914] usb2_vbus: supplied by vdd-sys-5v0 [ 5.529901] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 5.558154] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 5.564803] [drm] No driver support for vblank timestamp query. [ 5.741379] Console: switching to colour frame buffer device 240x75 [ 5.828095] drm drm: fb0: frame buffer device [ 5.857293] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 5.866490] tegra-ehci 7d008000.usb: EHCI Host Controller [ 5.872368] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 5.881624] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 5.907297] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 5.921437] hub 1-0:1.0: USB hub found [ 5.925395] hub 1-0:1.0: 1 port detected [ 5.939217] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 5.955202] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 6.049733] dvdd_ts: disabling [ 6.052852] usb1_vbus: disabling [ 6.056120] vdd_cam_1v8_reg: disabling [ 6.060929] ALSA device list: [ 6.063933] #0: NVIDIA Tegra Dalmore [ 6.069832] Waiting for root device /dev/mmcblk0p1... [ 6.247292] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 7.271538] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 63.727237] random: nonblocking pool is initialized
[PYBOOT] [dalmore 01:51]: Timed out waiting for "<type 'str'>":
[PYBOOT] [dalmore 01:52]: got exception: timeout ~$off
[PYBOOT] [dalmore 01:53]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------
[ 1.702459] NET: Registered protocol family 10 [ 1.703040] sit: IPv6 over IPv4 tunneling driver [ 1.706314] NET: Registered protocol family 17 [ 1.710304] NET: Registered protocol family 15 [ 1.714775] Key type dns_resolver registered [ 1.720103] Registering SWP/SWPB emulation handler [ 1.728942] [drm] Exynos DRM: using 12c10000.mixer device for DMA mapping operations [ 1.731671] exynos-drm exynos-drm: bound 12c10000.mixer (ops mixer_component_ops) [ 1.739087] exynos-drm exynos-drm: bound 12d00000.hdmi (ops hdmi_component_ops) [ 1.746214] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.752793] [drm] No driver support for vblank timestamp query. [ 1.758712] [drm] Initialized exynos 1.0.0 20110530 on minor 0 [ 1.765051] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.770281] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.781985] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.786359] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.796152] mmc1: new DDR MMC card at address 0001 [ 1.801158] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.801801] max98090 1-0010: MAX98090 REVID=0x43 [ 1.804089] max98090 1-0010: use default 2.8v micbias [ 1.815255] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.820916] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.827193] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.828517] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.833043] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.846427] mmcblk1: p1 p2 [ 1.877923] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:28 UTC (946688428) [ 1.899255] VDD10_HDMI_1.0V: disabling [ 1.899976] vdd_g3d: disabling [ 1.901044] BUCK8_2.8V: disabling [ 1.905`66] ALSA device list: [ 1.906672] #0: Odroid-U3 [ 1.910444] Waiting for root device /dev/mmcblk0p2...
[PYBOOT] [odroidu3 01:54]: Timed out waiting for "<type 'str'>":
[PYBOOT] [odroidu3 01:55]: got exception: timeout ~$off
[PYBOOT] [odroidu3 01:56]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.930692] mmc0: new high speed MMC card at address 0001 [ 1.941444] mmcblk0: mmc0:0001 SEM04G 3.69 GiB [ 1.946362] mmcblk0boot0: mmc0:0001 SEM04G partition 1 2.00 MiB [ 1.952729] mmcblk0boot1: mmc0:0001 SEM04G partition 2 2.00 MiB [ 1.962824] smps9: Bringing 0uV into 2100000-2100000uV [ 1.970980] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.977512] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.985526] ldo4: Bringing 0uV into 1800000-1800000uV [ 1.996648] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.003806] smsc95xx v1.0.4 [ 2.007537] ldo9: bypassed regulator has no supply! [ 2.012664] ldo9: failed to get the current voltage(-517) [ 2.018331] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.033669] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.056754] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.060472] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 2a:79:01:d0:01:ca [ 2.074865] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.104671] smps9: Bringing 0uV into 2100000-2100000uV [ 2.123433] ldo9: bypassed regulator has no supply! [ 2.128556] ldo9: failed to get the current voltage(-517) [ 2.134231] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.148734] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:02:27 UTC (946684947) [ 2.164409] pbias_mmc_omap5: disabling [ 2.168348] vmmcsdio_fixed: disabling [ 2.172903] Waiting for root device /dev/mmcblk1p2... [ 2.285974] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.421764] hub 1-2:1.0: USB hub found [ 2.425774] hub 1-2:1.0: 3 ports detected [ 2.431648] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.459685] smps9: Bringing 0uV into 2100000-2100000uV [ 2.478422] ldo9: bypassed regulator has no supply! [ 2.483545] ldo9: failed to get the current voltage(-517) [ 2.489214] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:12]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:13]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:14]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.975100] ldo1: Bringing 0uV into 1800000-1800000uV [ 1.981630] ldo2: Bringing 0uV into 2800000-2800000uV [ 1.989650] ldo4: Bringing 0uV into 1800000-1800000uV [ 2.000745] ldo7: Bringing 0uV into 2000000-2000000uV [ 2.008937] smsc95xx v1.0.4 [ 2.012388] ldo9: bypassed regulator has no supply! [ 2.017516] ldo9: failed to get the current voltage(-517) [ 2.023188] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.038555] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 2.064517] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 2.070917] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.098203] smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 42:5e:09:d0:08:c0 [ 2.110056] smps9: Bringing 0uV into 2100000-2100000uV [ 2.129109] ldo9: bypassed regulator has no supply! [ 2.134232] ldo9: failed to get the current voltage(-517) [ 2.139897] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.154036] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.187599] smps9: Bringing 0uV into 2100000-2100000uV [ 2.206510] ldo9: bypassed regulator has no supply! [ 2.211636] ldo9: failed to get the current voltage(-517) [ 2.217302] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 2.231804] palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.247447] pbias_mmc_omap5: disabling [ 2.251390] vmmcsdio_fixed: disabling [ 2.255935] Waiting for root device /dev/mmcblk1p2... [ 2.338764] usb 1-2: new high-speed USB device number 3 using ehci-omap [ 2.474629] hub 1-2:1.0: USB hub found [ 2.478645] hub 1-2:1.0: 3 ports detected [ 2.484506] omap-dwc3 4a020000.omap_dwc3: vbus init failed [ 2.512598] smps9: Bringing 0uV into 2100000-2100000uV [ 2.531633] ldo9: bypassed regulator has no supply! [ 2.536759] ldo9: failed to get the current voltage(-517) [ 2.542425] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:10]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:11]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:12]: Done. Board omap5uevm-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
ldo1: Bringing 0uV into 1800000-1800000uV ldo2: Bringing 0uV into 2800000-2800000uV ldo4: Bringing 0uV into 1800000-1800000uV ldo7: Bringing 0uV into 2000000-2000000uV ldo9: bypassed regulator has no supply! ldo9: failed to get the current voltage(-517) palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz smsc95xx v1.0.4 omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz omap-dwc3 4a020000.omap_dwc3: vbus init failed smps9: Bringing 0uV into 2100000-2100000uV ldo9: bypassed regulator has no supply! ldo9: failed to get the current voltage(-517) palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator palmas-rtc 48070000.i2c:palmas@48:rtc: setting system clock to 2000-01-01 00:04:42 UTC (946685082) pbias_mmc_omap5: disabling vmmcsdio_fixed: disabling smsc95xx 1-3:1.0 eth0: register 'smsc95xx' at usb-4a064c00.ehci-3, smsc95xx USB 2.0 Ethernet, 12:5c:cc:19:4c:2e omap-dwc3 4a020000.omap_dwc3: vbus init failed smps9: Bringing 0uV into 2100000-2100000uV ldo9: bypassed regulator has no supply! ldo9: failed to get the current voltage(-517) palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator Waiting for root device /dev/mmcblk1p2... usb 1-2: new high-speed USB device number 3 using ehci-omap hub 1-2:1.0: USB hub found hub 1-2:1.0: 3 ports detected omap-dwc3 4a020000.omap_dwc3: vbus init failed smps9: Bringing 0uV into 2100000-2100000uV ldo9: bypassed regulator has no supply! ldo9: failed to get the current voltage(-517) palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator
[PYBOOT] [omap5uevm 02:01]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:02]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:03]: Done. Board omap5uevm-arm-omap2plus_defconfig failure log: -------------------------------------------------
[ 3.944971] ldo9: bypassed regulator has no supply! [ 3.950096] ldo9: failed to get the current voltage(-517) [ 3.955763] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 3.978800] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 3.986394] omap_i2c 4807c000.i2c: bus 4 rev0.12 at 400 kHz [ 3.992978] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer cd [ 3.999292] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.006138] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.015730] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.025239] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.032298] omap_hsmmc 4809c000.mmc: lookup for GPIO cd failed [ 4.038441] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 4.044752] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 4.051619] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 4.061215] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 4.070723] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 4.077764] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 4.098305] omap_hsmmc 480ad000.mmc: GPIO lookup for consumer wp [ 4.104605] omap_hsmmc 480ad000.mmc: using device tree for GPIO lookup [ 4.111478] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480ad000[0]' [ 4.121074] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480ad000[0]' [ 4.130570] omap_hsmmc 480ad000.mmc: using lookup tables for GPIO lookup [ 4.137609] omap_hsmmc 480ad000.mmc: lookup for GPIO wp failed [ 4.157972] smps9: Bringing 0uV into 2100000-2100000uV [ 4.186125] ldo9: bypassed regulator has no supply! [ 4.191259] ldo9: failed to get the current voltage(-517) [ 4.196923] palmas-pmic 48070000.i2c:palmas@48:palmas_pmic: failed to register 48070000.i2c:palmas@48:palmas_pmic regulator [ 4.217135] hctosys: unable to open rtc device (rtc0) [ 4.222453] sr_init: No PMIC hook to init smartreflex [ 4.227950] sr_init: platform driver register failed for SR [ 4.256779] pbias_mmc_omap5: disabling [ 4.260740] vmmcsdio_fixed: disabling [ 4.266806] Waiting for root device /dev/mmcblk1p2...
[PYBOOT] [omap5uevm 02:02]: Timed out waiting for "<type 'str'>":
[PYBOOT] [omap5uevm 02:03]: got exception: timeout ~$off
[PYBOOT] [omap5uevm 02:04]: Done. Board pi-arm-multi_lpae_defconfig failure log: -------------------------------------------------
[ 1.517355] isl29018 7-0044: No cache defaults, reading back from HW [ 1.523710] isl29018 7-0044: Failed to read 1: -6 [ 1.528295] isl29018 7-0044: regmap initialization fails: -6 [ 1.538711] NET: Registered protocol family 10 [ 1.543137] sit: IPv6 over IPv4 tunneling driver [ 1.546723] NET: Registered protocol family 17 [ 1.550724] can: controller area network core (rev 20120528 abi 9) [ 1.556915] NET: Registered protocol family 29 [ 1.561302] can: raw protocol (rev 20120528) [ 1.565551] can: broadcast manager protocol (rev 20120528 t) [ 1.571193] can: netlink gateway (rev 20130117) max_hops=1 [ 1.576912] Key type dns_resolver registered [ 1.581231] ThumbEE CPU extension supported. [ 1.585142] Registering SWP/SWPB emulation handler [ 1.595026] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.600513] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.606872] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.612248] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.622321] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.632681] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.638126] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.648316] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.654497] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.659875] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.669592] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.691772] Waiting for root device /dev/mmcblk0p1... [ 1.695651] mmc0: tuning execution failed: -5 [ 1.699681] mmc0: error -5 whilst initialising MMC card [ 2.567388] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.581503] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.586965] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.593340] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.598723] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 02:37]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 02:38]: got exception: timeout ~$off
[PYBOOT] [pi 02:39]: Done. Board pi-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.517259] isl29018 7-0044: No cache defaults, reading back from HW [ 1.523616] isl29018 7-0044: Failed to read 1: -6 [ 1.528200] isl29018 7-0044: regmap initialization fails: -6 [ 1.538613] NET: Registered protocol family 10 [ 1.543044] sit: IPv6 over IPv4 tunneling driver [ 1.546627] NET: Registered protocol family 17 [ 1.550628] can: controller area network core (rev 20120528 abi 9) [ 1.556820] NET: Registered protocol family 29 [ 1.561207] can: raw protocol (rev 20120528) [ 1.565456] can: broadcast manager protocol (rev 20120528 t) [ 1.571098] can: netlink gateway (rev 20130117) max_hops=1 [ 1.576816] Key type dns_resolver registered [ 1.581138] ThumbEE CPU extension supported. [ 1.585047] Registering SWP/SWPB emulation handler [ 1.594924] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.600410] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.606768] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.612143] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.622217] input: gpio-keys as /devices/platform/gpio-keys/input/input1 [ 1.632571] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 1.638014] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 1.648202] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 1.654384] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 1.659762] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo [ 1.669479] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 1.691613] Waiting for root device /dev/mmcblk0p1... [ 1.695495] mmc0: tuning execution failed: -5 [ 1.699524] mmc0: error -5 whilst initialising MMC card [ 2.567285] asix 1-1:1.0 eth0: register 'asix' at usb-xhci-hcd.2.auto-1, ASIX AX88772 USB 2.0 Ethernet, c8:b3:73:46:fb:95 [ 2.581397] dwmmc_exynos 12210000.mmc: IDMAC supports 32-bit address mode. [ 2.586856] dwmmc_exynos 12210000.mmc: Using internal DMA controller. [ 2.593227] dwmmc_exynos 12210000.mmc: Version ID is 250a [ 2.598611] dwmmc_exynos 12210000.mmc: DW MMC controller at irq 70,64 bit host data width,64 deep fifo
[PYBOOT] [pi 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [pi 01:54]: got exception: timeout ~$off
[PYBOOT] [pi 01:55]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.872948] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 1.880039] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.880059] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.880079] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.880306] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.896513] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.897093] hub 3-0:1.0: USB hub found [ 1.897122] hub 3-0:1.0: 1 port detected [ 1.932751] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.939385] [drm] No driver support for vblank timestamp query. [ 1.985822] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.988173] mmc2: switch to bus width 8 failed [ 1.988461] mmc2: switch to bus width 4 failed [ 1.988476] mmc2: new high speed MMC card at address 0001 [ 1.989041] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.989254] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.989456] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.990768] mmcblk2: p3 [ 1.993948] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.996770] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 2.003991] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 2.023068] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 2.026935] mmc0: new SDIO card at address 0001 [ 2.046782] Console: switching to colour frame buffer device 170x48 [ 2.135118] drm drm: fb0: frame buffer device [ 2.151524] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.158290] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 2.165354] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 2.201951] vdd_1v5: disabling [ 2.205006] vdd_1v2: disabling [ 2.869688] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.881111] Waiting for root device /dev/mmcblk0p3... [ 58.006955] random: nonblocking pool is initialized
[PYBOOT] [seaboard 01:57]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:58]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:59]: Done. Board seaboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
VDDIO_HDMI: supplied by vdd_5v0 tegra-dc 54200000.dc: failed to probe RGB output: -517 utmi_phy_clk_enable: timeout waiting for phy to stabilize tegra-ehci c5000000.usb: EHCI Host Controller tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 hub 3-0:1.0: USB hub found hub 3-0:1.0: 1 port detected mmc2: switch to bus width 8 failed mmc2: switch to bus width 4 failed mmc2: new high speed MMC card at address 0001 mmcblk2: mmc2:0001 MMC08G 7.46 GiB mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [drm] No driver support for vblank timestamp query. mmcblk2: p3 mmc0: queuing unknown CIS tuple 0x80 (50 bytes) mmc0: queuing unknown CIS tuple 0x80 (7 bytes) mmc0: queuing unknown CIS tuple 0x80 (7 bytes) mmc0: queuing unknown CIS tuple 0x80 (19 bytes) Console: switching to colour frame buffer device 170x48 drm drm: fb0: frame buffer device [drm] Initialized tegra 0.0.0 20120330 on minor 0 input: gpio-keys as /devices/soc0/gpio-keys/input/input2 tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) vdd_1v5: disabling vdd_1v2: disabling mmc0: queuing unknown CIS tuple 0x02 (1 bytes) mmc0: new SDIO card at address 0001 asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 Waiting for root device /dev/mmcblk0p3...
[PYBOOT] [seaboard 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:53]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:54]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------
[ 4.414595] can: broadcast manager protocol (rev 20120528 t) [ 4.420304] can: netlink gateway (rev 20130117) max_hops=1 [ 4.455840] Bluetooth: RFCOMM socket layer initialized [ 4.461014] Bluetooth: RFCOMM ver 1.11 [ 4.464773] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 4.470210] Bluetooth: BNEP socket layer initialized [ 4.475166] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 4.481720] Bluetooth: HIDP socket layer initialized [ 4.487427] Key type dns_resolver registered [ 4.493201] Registering SWP/SWPB emulation handler [ 4.508942] VDDIO_HDMI: supplied by vdd_5v0 [ 4.515950] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 4.527823] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 4.534296] tegra-ehci c5000000.usb: EHCI Host Controller [ 4.539810] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 4.548033] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 4.565691] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 4.575492] hub 3-0:1.0: USB hub found [ 4.579366] hub 3-0:1.0: 1 port detected [ 4.594046] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 4.600690] [drm] No driver support for vblank timestamp query. [ 4.687819] Console: switching to colour frame buffer device 170x48 [ 4.716720] drm drm: fb0: frame buffer device [ 4.729777] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 4.755699] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 4.763770] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 4.772039] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:01 UTC (1230768001) [ 4.792109] vdd_1v5: disabling [ 4.795162] vdd_1v2: disabling [ 4.798328] ALSA device list: [ 4.801287] #0: NVIDIA Tegra Seaboard [ 4.805827] Waiting for root device /dev/mmcblk0p3... [ 62.135773] random: nonblocking pool is initialized
[PYBOOT] [seaboard 01:52]: Timed out waiting for "<type 'str'>":
[PYBOOT] [seaboard 01:53]: got exception: timeout ~$off
[PYBOOT] [seaboard 01:54]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
[....] CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0cdone. [....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[1G[[32m ok [39;49m8[?25h[?0c.
Debian GNU/Linux 7.0 snow ttySAC3
snow login: root root Password: root Unable to handle kernel paging request at virtual address c10b3618 pgd = c0204000 [c10b3618] *pgd=4100041e(bad) Internal error: Oops: 8000000d [#1] ARM Modules linked in: CPU: 0 PID: 0 Comm: swapper Tainted: G W 4.6.0-rc5-next-20160428 #1 Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) task: c1005f30 ti: c1000000 task.ti: c1000000 PC is at 0xc10b3618 LR is at 0x0 pc : [<c10b3618>] lr : [<00000000>] psr: 600001d3 sp : c1001f88 ip : 00000000 fp : c10b40d8 r10: 00000000 r9 : 00000001 r8 : 679de37e r7 : 00000001 r6 : c10b4178 r5 : c10b3620 r4 : c100212c r3 : 00010000 r2 : 00000006 r1 : 00000006 r0 : 00000001 Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none Control: 10c53c7d Table: 6d49c059 DAC: 00000051 Process swapper (pid: 0, stack limit = 0xc1000218) Stack: (0xc1001f88 to 0xc1002000) 1f80: c1002134 c10fe055 c1001fa4 c0a9638c ffffffff c1000000 1fa0: c1001fac c0a9658c c10b40d8 c0358000 00000001 ffffffff 00000000 c0f00c44 1fc0: ffffffff ffffffff 00000000 c0f0068c 00000000 c0f8ba20 c11001d4 c10020b4 1fe0: c0f8ba1c c10070f8 40204059 410fc0f4 00000000 40208078 00000000 00000000 Code: 00000000 00000000 00000000 00000000 (c10b3620) ---[ end trace cb88537fdc8fa202 ]--- Kernel panic - not syncing: Attempted to kill the idle task! ---[ end Kernel panic - not syncing: Attempted to kill the idle task!
[PYBOOT] [snow 00:50]: got exception: panic ~$off
[PYBOOT] [snow 00:51]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------
[ 1.975189] can: controller area network core (rev 20120528 abi 9) [ 1.981506] NET: Registered protocol family 29 [ 1.985961] can: raw protocol (rev 20120528) [ 1.990264] can: broadcast manager protocol (rev 20120528 t) [ 1.995971] can: netlink gateway (rev 20130117) max_hops=1 [ 2.002319] Key type dns_resolver registered [ 2.006927] ThumbEE CPU extension supported. [ 2.011260] Registering SWP/SWPB emulation handler [ 2.023590] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.030731] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.040283] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.047332] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.054382] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.061401] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.078674] db8500-esram12: disabling [ 2.082489] db8500-esram34: disabling [ 2.086669] V-CSI/DSI: disabling [ 2.091064] mmci-reg: disabling [ 2.097076] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.103088] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.109710] Waiting for root device /dev/mmcblk0p4... [ 2.140197] mmc3: new high speed MMC card at address 0001 [ 2.146545] mmcblk3: mmc3:0001 3.53 GiB [ 2.150970] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.156768] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.162597] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.169494] mmcblk3: p1 p2 p3 p4 Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 02:14]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 02:15]: got exception: timeout ~$off
[PYBOOT] [snowball 02:16]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------
sdhci-pltfm: SDHCI platform and OF driver helper ledtrig-cpu: registered to indicate activity on CPUs usbcore: registered new interface driver usbhid usbhid: USB HID core driver NET: Registered protocol family 10 sit: IPv6 over IPv4 tunneling driver NET: Registered protocol family 17 can: controller area network core (rev 20120528 abi 9) NET: Registered protocol family 29 can: raw protocol (rev 20120528) can: broadcast manager protocol (rev 20120528 t) can: netlink gateway (rev 20130117) max_hops=1 Key type dns_resolver registered ThumbEE CPU extension supported. input: gpio_keys as /devices/soc0/gpio_keys/input/input0 rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 db8500-esram12: disabling db8500-esram34: disabling V-CSI/DSI: disabling mmci-reg: disabling uart-pl011 80007000.uart: DMA channel TX dma0chan20 uart-pl011 80007000.uart: DMA channel RX dma0chan21 Waiting for root device /dev/mmcblk0p4... mmc3: new high speed MMC card at address 0001 mmcblk3: mmc3:0001 3.53 GiB mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB mmcblk3rpmb: mmc3:0001 partition 3 128 KiB mmcblk3: p1 p2 p3 p4
[PYBOOT] [snowball 01:57]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:58]: got exception: timeout ~$off
[PYBOOT] [snowball 01:59]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------
[ 2.638275] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.646057] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.678039] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.689208] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.704956] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.715820] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.749877] NET: Registered protocol family 10 [ 2.757812] sit: IPv6 over IPv4 tunneling driver [ 2.764953] NET: Registered protocol family 17 [ 2.769500] NET: Registered protocol family 35 [ 2.774475] NET: Registered protocol family 37 [ 2.779266] Registering SWP/SWPB emulation handler [ 2.800079] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.808868] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-09 03:30:40 UTC (955251040) [ 2.819091] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.826232] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.833251] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.840332] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.853851] db8500-esram12: disabling [ 2.857604] db8500-esram34: disabling [ 2.861541] V-CSI/DSI: disabling [ 2.864807] mmci-reg: disabling [ 2.868103] ALSA device list: [ 2.871093] #0: MOP500-card [ 2.874420] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.880371] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.886566] Waiting for root device /dev/mmcblk0p4... cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.
Disconnected.
[PYBOOT] [snowball 01:56]: Timed out waiting for "<type 'str'>":
[PYBOOT] [snowball 01:57]: got exception: timeout ~$off
[PYBOOT] [snowball 01:58]: Done. Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------
minutes INIT: INIT: cannot execute "/sb[ 20.101686] mmcblk0: error -110 sending status command, retrying in/getty"cannot execute "/sbin/getty"
INIT: Id "2" respawni[ 20.110918] mmcblk0: error -110 sending status command, retrying ng too fast: disabled for 5 minut[ 20.122199] mmcblk0: error -110 sending status command, aborting es [ 20.133720] mmcblk0: error -110 sending status command, retrying [ 20.142179] mmcblk0: error -110 sending status command, retrying [ 20.150631] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/gett[ 20.161779] mmcblk0: error -110 sending status command, retrying y" INIT: Id "S1" respawning to[ 20.170606] mmcblk0: error -110 sending status command, retrying o fast: disabled for 5 minutes [ 20.179501] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty"
[ 20.211950] mmcblk0: error -110 sending status command, retrying [ 20.220429] mmcblk0: error -110 sending status command, retrying [ 20.228892] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/gett[ 20.240213] mmcblk0: error -110 sending status command, retrying y" INIT: Id "4" respawning too[ 20.249084] mmcblk0: error -110 sending status command, retrying fast: disabled for 5 minutes [ 20.257973] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" [ 20.292802] mmcblk0: error -110 sending status command, retrying [ 20.301272] mmcblk0: error -110 sending status command, retrying [ 20.309736] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" INIT: Id "5" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 50.194945] random: nonblocking pool is initialized
[PYBOOT] [wandboard 02:58]: Timed out waiting for "<type 'str'>":
[PYBOOT] [wandboard 02:59]: got exception: timeout ~$off
[PYBOOT] [wandboard 03:00]: Done.
kernel-build-reports@lists.linaro.org