Full logs are available at http://arm-soc.lixom.net/bootlogs/next/next-20161109/

Failed boards:

arndale arm-multi_v7_nosmp_defconfig : FAILED 25:17.11 chitra powerpc-pasemi_defconfig : FAILED 4:21.64 chitra powerpc-ppc64_defconfig : FAILED 1:45.93 colombus arm-multi_v7_nosmp_defconfig : FAILED 3:22.63 cubie arm-sunxi_defconfig : FAILED 2:54.00 cubie arm-multi_v7_defconfig : FAILED 4:51.44 cubie arm-multi_v7_nosmp_defconfig : FAILED 2:55.88 cubie2 arm-sunxi_defconfig : FAILED 2:53.45 cubie2 arm-multi_v7_defconfig : FAILED 3:19.19 cubie2 arm-multi_lpae_defconfig : FAILED 2:59.98 cubie2 arm-multi_v7_nosmp_defconfig : FAILED 2:54.65 omap5uevm arm-multi_v7_defconfig : FAILED 2:06.91 omap5uevm arm-multi_lpae_defconfig : FAILED 0:53.52 omap5uevm arm-multi_v7_nosmp_defconfig : FAILED 2:08.79 pi arm-exynos_defconfig : FAILED 1:51.70 pit arm-exynos_defconfig : FAILED 0:34.78 seattle arm64-defconfig : FAILED 4:49.11 seattle arm64-nosmp_defconfig : FAILED 4:27.19 snow arm-multi_v7_nosmp_defconfig : FAILED 0:48.26 snowball arm-u8500_defconfig : FAILED 3:19.22 wandboard arm-imx_v6_v7_defconfig : FAILED 2:59.36

Successful boards:

arndale arm-exynos_defconfig : warnings 1:31.29 arndale arm-multi_v7_defconfig : warnings 1:34.24 arndale arm-multi_lpae_defconfig : warnings 1:45.24 bbb arm-omap2plus_defconfig : passed 1:32.30 bbb arm-multi_v7_defconfig : passed 1:14.92 bbb arm-multi_v7_nosmp_defconfig : passed 2:28.34 beagleboard-x15 arm-omap2plus_defconfig : warnings 0:46.04 beagleboard-x15 arm-multi_v7_defconfig : passed 0:46.69 beagleboard-x15 arm-multi_lpae_defconfig : passed 0:48.35 beagleboard-x15 arm-multi_v7_nosmp_defconfig : warnings 0:51.42 beaver arm-tegra_defconfig : warnings 1:44.41 beaver arm-multi_v7_defconfig : warnings 1:35.56 beaver arm-multi_v7_nosmp_defconfig : warnings 2:03.08 capri arm-multi_v7_defconfig : passed 0:50.78 capri arm-multi_v7_nosmp_defconfig : warnings 1:03.71 colombus arm-sunxi_defconfig : warnings 2:05.02 colombus arm-multi_v7_defconfig : warnings 2:32.70 colombus arm-multi_lpae_defconfig : warnings 2:17.56 cosmic arm-imx_v6_v7_defconfig : passed 3:06.54 cosmic arm-multi_v7_defconfig : passed 3:07.64 cosmic arm-multi_v7_nosmp_defconfig : passed 2:49.44 cubox arm-multi_v7_defconfig : passed 1:09.34 cubox arm-mvebu_v7_defconfig : passed 2:22.15 cubox arm-multi_v7_nosmp_defconfig : passed 1:08.27 dalmore arm-tegra_defconfig : warnings 1:41.21 dalmore arm-multi_v7_defconfig : warnings 1:29.16 dalmore arm-multi_v7_nosmp_defconfig : warnings 1:38.66 hummingboard arm-imx_v6_v7_defconfig : passed 1:31.99 hummingboard arm-multi_v7_defconfig : passed 1:44.94 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:06.07 jetsontk1 arm-tegra_defconfig : warnings 0:45.42 jetsontk1 arm-multi_v7_defconfig : warnings 0:52.90 jetsontk1 arm-multi_lpae_defconfig : warnings 1:03.25 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:10.95 jetsontx1 arm64-defconfig : passed 3:07.75 jetsontx1 arm64-nosmp_defconfig : passed 1:52.83 minnowmax x86-minnowmax_defconfig : warnings 1:35.79 odroidu3 arm-exynos_defconfig : warnings 1:52.57 odroidu3 arm-multi_v7_defconfig : warnings 2:17.07 omap5uevm arm-omap2plus_defconfig : warnings 1:02.97 pandaes arm-omap2plus_defconfig : warnings 1:51.62 pandaes arm-multi_v7_defconfig : warnings 1:34.96 pandaes arm-multi_v7_nosmp_defconfig : warnings 2:14.82 parallella arm-multi_v7_defconfig : warnings 2:59.74 parallella arm-multi_v7_nosmp_defconfig : warnings 2:43.56 pi arm-multi_v7_defconfig : passed 2:22.75 pi arm-multi_lpae_defconfig : passed 2:23.32 pi arm-multi_v7_nosmp_defconfig : warnings 2:15.68 pit arm-multi_v7_defconfig : passed 2:13.38 pit arm-multi_lpae_defconfig : passed 2:20.33 pit arm-multi_v7_nosmp_defconfig : warnings 2:44.09 seaboard arm-tegra_defconfig : warnings 1:00.35 seaboard arm-multi_v7_defconfig : warnings 1:05.64 seaboard arm-multi_v7_nosmp_defconfig : warnings 2:45.80 snow arm-exynos_defconfig : warnings 2:14.65 snow arm-multi_v7_defconfig : warnings 2:38.52 snow arm-multi_lpae_defconfig : warnings 2:08.83 socfpga arm-socfpga_defconfig : passed 1:07.54 socfpga arm-multi_v7_defconfig : warnings 1:45.00 socfpga arm-multi_v7_nosmp_defconfig : warnings 1:35.36 trimslice arm-tegra_defconfig : warnings 1:41.24 trimslice arm-multi_v7_defconfig : warnings 3:22.05 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:44.28 wandboard arm-multi_v7_defconfig : warnings 1:16.70 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:25.22

Offline boards:

apc arm-vt8500_v6_v7_defconfig : OFFLINE 2:24.87 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:24.16 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:17.95 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 1:23.20 dalmore arm-multi_lpae_defconfig : OFFLINE 2:47.02 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:51.04 rk3288evb arm-multi_lpae_defconfig : OFFLINE 2:06.74 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:44.50 sama5 arm-sama5_defconfig : OFFLINE 2:19.99 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:47.28 snowball arm-multi_v7_defconfig : OFFLINE 2:30.77 snowball arm-multi_v7_nosmp_defconfig : OFFLINE 1:52.26

Board legend is available at http://arm-soc.lixom.net/boards.html

Last entries of failed logs below:

========================================================================

Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.682159] usbcore: registered new interface driver smsc95xx [ 1.687877] usbcore: registered new interface driver net1080 [ 1.693519] usbcore: registered new interface driver cdc_subset [ 1.699419] usbcore: registered new interface driver zaurus [ 1.704992] usbcore: registered new interface driver cdc_ncm [ 1.711090] exynos-dwc3 soc:usb_dwc3: no suspend clk specified [ 1.716435] soc:usb_dwc3 supply vdd33 not found, using dummy regulator [ 1.722946] soc:usb_dwc3 supply vdd10 not found, using dummy regulator [ 1.732624] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.737687] ehci-pci: EHCI PCI platform driver [ 1.742134] ehci-platform: EHCI generic platform driver [ 1.747451] ehci-orion: EHCI orion driver [ 1.751387] SPEAr-ehci: EHCI SPEAr driver [ 1.755382] ehci-st: EHCI STMicroelectronics driver [ 1.760242] ehci-exynos: EHCI EXYNOS driver [ 1.764501] ehci-atmel: EHCI Atmel driver [ 1.768389] tegra-ehci: Tegra EHCI driver [ 1.772410] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.778482] ohci-pci: OHCI PCI platform driver [ 1.782927] ohci-platform: OHCI generic platform driver [ 1.788208] ohci-omap3: OHCI OMAP3 driver [ 1.792183] SPEAr-ohci: OHCI SPEAr driver [ 1.796179] ohci-st: OHCI STMicroelectronics driver [ 1.801042] ohci-atmel: OHCI Atmel driver [ 1.805309] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 1.810428] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 1 [ 1.818260] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.826755] xhci-hcd xhci-hcd.2.auto: irq 140, io mem 0x12000000 [ 1.833152] hub 1-0:1.0: USB hub found [ 1.836475] hub 1-0:1.0: 1 port detected [ 1.840552] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 1.845838] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 2 [ 1.853504] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.861917] hub 2-0:1.0: USB hub found [ 1.865289] hub 2-0:1.0: 1 port detected [ [PYBOOT] [arndale 25:10]: got exception: maximum recursion depth exceeded ~$off

[PYBOOT] [arndale 25:11]: Done.

========================================================================

Board chitra-powerpc-pasemi_defconfig failure log: -------------------------------------------------

[ 3.023767] ALSA device list: [ 3.026736] No soundcards found. [ 3.305291] ata3: SATA link down (SStatus 0 SControl 300) [ 3.617326] ata4: SATA link down (SStatus 0 SControl 300) [ 3.622771] md: Waiting for all devices to be available before autodetect [ 3.629567] md: If you don't use raid, use raid=noautodetect [ 3.635459] md: Autodetecting RAID arrays. [ 3.639561] md: autorun ... [ 3.642353] md: ... autorun DONE. [ 3.646230] EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities [ 3.656957] EXT4-fs (sda2): mounted filesystem without journal. Opts: (null) [ 3.664051] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [ 3.674019] devtmpfs: mounted [ 3.677165] Freeing unused kernel memory: 512K [ 3 [PYBOOT] [chitra 01:48]: kernel: finished booting, starting userspace. .681613] This architecture does not have kernel memory protection. Mount failed for selinuxfs on /sys/fs/selinux: No such file or directory INIT: version 2.88 booting [info] Using makefile-style concurrent boot in runlevel S. [....] Starting the hotplug events dispatcher: udevd[ 4.382276] systemd-udevd[1084]: starting version 204 [?25l[?1c7[ ok 8[?25h[?0c. [....] Synthesizing the initial hotplug events...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Setting preliminary keymap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Setting parameters of disc: (none)[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 5.871145] EXT4-fs (sda2): warning: mounting unchecked fs, running e2fsck is recommended [ 5.881198] EXT4-fs (sda2): re-mounted. Opts: (null) [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [ 6.296302] EXT4-fs error (device sda2): ext4_mb_generate_buddy:758: group 21, block bitmap and bg descriptor inconsistent: 7871 vs 7869 free clusters [ 75.142145] random: crng init done

[PYBOOT] [chitra 04:18]: Timed out waiting for "<type 'str'>":

[PYBOOT] [chitra 04:19]: got exception: timeout ~$off

[PYBOOT] [chitra 04:21]: Done.

========================================================================

Board chitra-powerpc-ppc64_defconfig failure log: -------------------------------------------------

pcpu-alloc: [0] 0 1 Built 1 zonelists in Node order, mobility grouping on. Total pages: 1034240 Policy zone: DMA Kernel command line: debug root=/dev/sda2 console=ttyS0,115200 PID hash table entries: 4096 (order: 3, 32768 bytes) Sorting __ex_table... Memory: 4023964K/4194304K available (9740K kernel code, 1732K rwdata, 3400K rodata, 4176K init, 1187K bss, 170340K reserved, 0K cma-reserved) SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 Hierarchical RCU implementation. Build-time adjustment of leaf fanout to 64. RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2. RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2 NR_IRQS:512 nr_irqs:512 16 OpenPIC addr: fc000000 mpic: Setting up MPIC "PASEMI-OPIC" version 1.3 at fc000000, max 2 CPUs mpic: ISU size: 1024, shift: 10, mask: 3ff mpic: Initializing for 1024 sources time_init: decrementer frequency = 66.666666 MHz time_init: processor frequency = 2000.000000 MHz clocksource: timebase: mask: 0xffffffffffffffff max_cycles: 0xf6018975a, max_idle_ns: 440795204712 ns clocksource: timebase mult[f000003] shift[24] registered clockevent: decrementer mult[1111110e] shift[32] cpu[0] Console: colour dummy device 80x25 pid_max: default: 32768 minimum: 301 Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) mpic: requesting IPIs... smp: Bringing up secondary CPUs ... smp: Brought up 1 node, 2 CPUs devtmpfs: initialized clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns kworker/u4:0 (22) used greatest stack depth: 12656 bytes lef [PYBOOT] [chitra 01:43]: Timed out waiting for "<type 'str'>":

[PYBOOT] [chitra 01:44]: got exception: timeout ~$off

[PYBOOT] [chitra 01:45]: Done.

========================================================================

Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 44.761080] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 44.775557] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

[ 93.808952] eth0: device MAC address 96:b9:28:72:d8:9e [ 93.846873] RX IPC Checksum Offload disabled [ 93.851496] No MAC Management Counters available [ 93.856541] sun7i-dwmac 1c30000.ethernet eth0: fail to init PTP. [ 93.863754] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/96:b9:28:72:d8:9e Sending on LPF/eth0/96:b9:28:72:d8:9e Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 14 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 16 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 No DHCPOFFERS received. No working leases in persistent database - sleeping.

[PYBOOT] [colombus 03:19]: Timed out waiting for "<type 'str'>":

[PYBOOT] [colombus 03:20]: got exception: timeout ~$off

[PYBOOT] [colombus 03:22]: Done.

========================================================================

Board cubie-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.707961] sunxi-rtc 1c20d00.rtc: setting system clock to 2010-01-01 00:00:15 UTC (1262304015) [ 1.717227] vcc3v0: disabling [ 1.720248] vcc5v0: disabling [ 1.754184] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.764075] ata1.00: ATA-8: SanDisk SSD P4 32GB, SSD CS01, max UDMA/133 [ 1.770705] ata1.00: 62533296 sectors, multi 1: LBA48 [ 1.776369] ata1.00: configured for UDMA/133 [ 1.781144] scsi 0:0:0:0: Direct-Access ATA SanDisk SSD P4 3 CS01 PQ: 0 ANSI: 5 [ 1.791571] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 1.799324] sd 0:0:0:0: [sda] Write Protect is off [ 1.804251] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.822775] sda: sda1 [ 1.826427] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.831963] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities [ 1.840388] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities [ 1.931245] EXT4-fs (sda1): recovery complete [ 1.939352] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 1.947068] VFS: Mounted root (ext4 filesystem) on device 8:1. [ 1.955010] devtmpfs: mounted [ 1.960426] Freeing unused kernel memory: 2048K

[PYBOOT] [cubie 02:18]: kernel: finished booting, starting userspace. INIT: version 2.88 booting [info] Using makefile-style concurrent boot in runlevel S. [....] Starting the hotplug events dispatcher: udevd[ 2.630406] udevd[193]: starting version 175 [?25l[?1c7[ ok 8[?25h[?0c. [....] Synthesizing the initial hotplug events...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 5.860222] EXT4-fs (sda1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1

[PYBOOT] [cubie 04:48]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cubie 04:49]: got exception: timeout ~$off

[PYBOOT] [cubie 04:50]: Done.

========================================================================

Board cubie-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.586789] sunxi-rtc 1c20d00.rtc: setting system clock to 2010-01-01 00:00:14 UTC (1262304014) [ 1.595976] vcc3v0: disabling [ 1.598982] vcc5v0: disabling [ 1.642727] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.652527] ata1.00: ATA-8: SanDisk SSD P4 32GB, SSD CS01, max UDMA/133 [ 1.659151] ata1.00: 62533296 sectors, multi 1: LBA48 [ 1.664790] ata1.00: configured for UDMA/133 [ 1.669445] scsi 0:0:0:0: Direct-Access ATA SanDisk SSD P4 3 CS01 PQ: 0 ANSI: 5 [ 1.679282] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 1.686958] sd 0:0:0:0: [sda] Write Protect is off [ 1.691924] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.710013] sda: sda1 [ 1.713329] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.718659] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities [ 1.726905] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities [ 1.811766] EXT4-fs (sda1): recovery complete [ 1.819718] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 1.827416] VFS: Mounted root (ext4 filesystem) on device 8:1. [ 1.835269] devtmpfs: mounted [ 1.839809] Freeing unused kernel memory: 1024K

[PYBOOT] [cubie 00:23]: kernel: finished booting, starting userspace. INIT: version 2.88 booting [info] Using makefile-style concurrent boot in runlevel S. [....] Starting the hotplug events dispatcher: udevd[ 2.401505] udevd[188]: starting version 175 [?25l[?1c7[ ok 8[?25h[?0c. [....] Synthesizing the initial hotplug events...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 4.806156] EXT4-fs (sda1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1

[PYBOOT] [cubie 02:53]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cubie 02:54]: got exception: timeout ~$off

[PYBOOT] [cubie 02:55]: Done.

========================================================================

Board cubie-arm-sunxi_defconfig failure log: -------------------------------------------------

[ 1.671958] vcc5v0: disabling [ 1.674934] ldo3: disabling [ 1.678069] ldo4: disabling [ 1.680944] ata1.00: ATA-8: SanDisk SSD P4 32GB, SSD CS01, max UDMA/133 [ 1.687558] ata1.00: 62533296 sectors, multi 1: LBA48 [ 1.692803] ALSA device list: [ 1.695772] #0: sun4i-codec [ 1.699765] ata1.00: configured for UDMA/133 [ 1.704504] scsi 0:0:0:0: Direct-Access ATA SanDisk SSD P4 3 CS01 PQ: 0 ANSI: 5 [ 1.714081] sd 0:0:0:0: [sda] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB) [ 1.721800] sd 0:0:0:0: [sda] Write Protect is off [ 1.726685] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.745029] sda: sda1 [ 1.748625] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.754069] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities [ 1.762548] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities [ 1.795187] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 1.802920] VFS: Mounted root (ext4 filesystem) on device 8:1. [ 1.810790] devtmpfs: mounted [ 1.815237] Freeing unused kernel memory: 1024K

[PYBOOT] [cubie 00:21]: kernel: finished booting, starting userspace. INIT: version 2.88 booting [info] Using makefile-style concurrent boot in runlevel S. [....] Starting the hotplug events dispatcher: udevd[ 2.553759] udevd[177]: starting version 175 [?25l[?1c7[ ok 8[?25h[?0c. [....] Synthesizing the initial hotplug events...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 5.642268] EXT4-fs (sda1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1

[PYBOOT] [cubie 02:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cubie 02:52]: got exception: timeout ~$off

[PYBOOT] [cubie 02:53]: Done.

========================================================================

Board cubie2-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.765098] vcc3v0: disabling [ 1.768137] vcc5v0: disabling [ 1.802047] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.813680] ata1.00: ATA-8: SanDisk pSSD-S2 8GB, SSD 6.00, max UDMA/133 [ 1.820314] ata1.00: 15649200 sectors, multi 0: LBA48 [ 1.833323] ata1.00: configured for UDMA/133 [ 1.838184] scsi 0:0:0:0: Direct-Access ATA SanDisk pSSD-S2 6.00 PQ: 0 ANSI: 5 [ 1.848965] sd 0:0:0:0: [sda] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 1.856903] sd 0:0:0:0: [sda] Write Protect is off [ 1.861873] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.889625] sda: sda1 [ 1.893459] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.899176] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities [ 1.907798] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities [ 2.107187] EXT4-fs (sda1): recovery complete [ 2.112938] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 2.120672] VFS: Mounted root (ext4 filesystem) on device 8:1. [ 2.129541] devtmpfs: mounted [ 2.134972] Freeing unused kernel memory: 2048K

[PYBOOT] [cubie2 00:26]: kernel: finished booting, starting userspace. INIT: version 2.88 booting [info] Using makefile-style concurrent boot in runlevel S. [ 2.504496] random: fast init done [....] Starting the hotplug events dispatcher: udevd[ 2.924126] udevd[198]: starting version 175 [?25l[?1c7[ ok 8[?25h[?0c. [....] Synthesizing the initial hotplug events...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 6.683476] EXT4-fs (sda1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1

[PYBOOT] [cubie2 02:56]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cubie2 02:57]: got exception: timeout ~$off

[PYBOOT] [cubie2 02:58]: Done.

========================================================================

Board cubie2-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.765101] vcc3v0: disabling [ 1.768139] vcc5v0: disabling [ 1.802043] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.813671] ata1.00: ATA-8: SanDisk pSSD-S2 8GB, SSD 6.00, max UDMA/133 [ 1.820302] ata1.00: 15649200 sectors, multi 0: LBA48 [ 1.833367] ata1.00: configured for UDMA/133 [ 1.838223] scsi 0:0:0:0: Direct-Access ATA SanDisk pSSD-S2 6.00 PQ: 0 ANSI: 5 [ 1.849023] sd 0:0:0:0: [sda] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 1.856946] sd 0:0:0:0: [sda] Write Protect is off [ 1.861921] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.889647] sda: sda1 [ 1.893473] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.899192] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities [ 1.907830] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities [ 2.173424] EXT4-fs (sda1): recovery complete [ 2.179240] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 2.186981] VFS: Mounted root (ext4 filesystem) on device 8:1. [ 2.195817] devtmpfs: mounted [ 2.201266] Freeing unused kernel memory: [PYBOOT] [cubie2 00:46]: kernel: finished booting, starting userspace. 2048K INIT: version 2.88 booting [info] Using makefile-style concurrent boot in runlevel S. [ 2.553002] random: fast init done [....] Starting the hotplug events dispatcher: udevd[ 2.980459] udevd[198]: starting version 175 [?25l[?1c7[ ok 8[?25h[?0c. [....] Synthesizing the initial hotplug events...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 6.915422] EXT4-fs (sda1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1

[PYBOOT] [cubie2 03:16]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cubie2 03:17]: got exception: timeout ~$off

[PYBOOT] [cubie2 03:18]: Done.

========================================================================

Board cubie2-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.754842] vcc3v0: disabling [ 1.757851] vcc5v0: disabling [ 1.796590] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.807983] ata1.00: ATA-8: SanDisk pSSD-S2 8GB, SSD 6.00, max UDMA/133 [ 1.814605] ata1.00: 15649200 sectors, multi 0: LBA48 [ 1.827754] ata1.00: configured for UDMA/133 [ 1.832474] scsi 0:0:0:0: Direct-Access ATA SanDisk pSSD-S2 6.00 PQ: 0 ANSI: 5 [ 1.842792] sd 0:0:0:0: [sda] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 1.850586] sd 0:0:0:0: [sda] Write Protect is off [ 1.855490] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.881439] sda: sda1 [ 1.884859] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.890391] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities [ 1.898799] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities [ 2.122305] EXT4-fs (sda1): recovery complete [ 2.128007] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 2.135721] VFS: Mounted root (ext4 filesystem) on device 8:1. [ 2.144461] devtmpfs: mounted [ 2.148673] Freeing unused kernel memory: 1024K

[PYBOOT] [cubie2 00:22]: kernel: finished booting, starting userspace. INIT: version 2.88 booting [info] Using makefile-style concurrent boot in runlevel S. [ 2.484251] random: fast init done [....] Starting the hotplug events dispatcher: udevd[ 2.827345] udevd[187]: starting version 175 [?25l[?1c7[ ok 8[?25h[?0c. [....] Synthesizing the initial hotplug events...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 5.930043] EXT4-fs (sda1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1

[PYBOOT] [cubie2 02:52]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cubie2 02:53]: got exception: timeout ~$off

[PYBOOT] [cubie2 02:54]: Done.

========================================================================

Board cubie2-arm-sunxi_defconfig failure log: -------------------------------------------------

[ 1.665723] vcc5v0: disabling [ 1.668701] ldo3: disabling [ 1.671834] ldo4: disabling [ 1.674851] ata1.00: ATA-8: SanDisk pSSD-S2 8GB, SSD 6.00, max UDMA/133 [ 1.681469] ata1.00: 15649200 sectors, multi 0: LBA48 [ 1.686675] ALSA device list: [ 1.689633] #0: sun4i-codec [ 1.696006] ata1.00: configured for UDMA/133 [ 1.700823] scsi 0:0:0:0: Direct-Access ATA SanDisk pSSD-S2 6.00 PQ: 0 ANSI: 5 [ 1.710531] sd 0:0:0:0: [sda] 15649200 512-byte logical blocks: (8.01 GB/7.46 GiB) [ 1.718286] sd 0:0:0:0: [sda] Write Protect is off [ 1.723366] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.750827] sda: sda1 [ 1.754523] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.760030] EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities [ 1.768721] EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities [ 1.812189] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 1.819954] VFS: Mounted root (ext4 filesystem) on device 8:1. [ 1.841080] devtmpfs: mounted [ 1.845258] Freeing unused kernel memory: 1024K

[PYBOOT] [cubie2 00:19]: kernel: finished booting, starting userspace. INIT: version 2.88 booting [info] Using makefile-style concurrent boot in runlevel S. [....] Starting the hotplug events dispatcher: udevd[ 2.706356] udevd[181]: starting version 175 [?25l[?1c7[ ok 8[?25h[?0c. [....] Synthesizing the initial hotplug events...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 6.419064] EXT4-fs (sda1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1

[PYBOOT] [cubie2 02:49]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cubie2 02:50]: got exception: timeout ~$off

[PYBOOT] [cubie2 02:51]: Done.

========================================================================

Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.091446] WARNING: CPU: 0 PID: 20 at /work/build/batch/fs/kernfs/dir.c:483 kernfs_get+0x44/0x48 [ 2.100764] Modules linked in: [ 2.103974] CPU: 0 PID: 20 Comm: kworker/0:1 Not tainted 4.9.0-rc4-next-20161109 #1 [ 2.111992] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 2.118285] Workqueue: events deferred_probe_work_func [ 2.123681] [<c03103e4>] (unwind_backtrace) from [<c030b9a0>] (show_stack+0x10/0x14) [ 2.131787] [<c030b9a0>] (show_stack) from [<c059ccfc>] (dump_stack+0x88/0x9c) [ 2.139349] [<c059ccfc>] (dump_stack) from [<c0341c58>] (__warn+0xe8/0x100) [ 2.146640] [<c0341c58>] (__warn) from [<c0341d20>] (warn_slowpath_null+0x20/0x28) [ 2.154568] [<c0341d20>] (warn_slowpath_null) from [<c047ae78>] (kernfs_get+0x44/0x48) [ 2.162859] [<c047ae78>] (kernfs_get) from [<c047ea78>] (internal_create_group+0x6c/0x2f8) [ 2.171519] [<c047ea78>] (internal_create_group) from [<c047f0a4>] (sysfs_create_groups+0x44/0x84) [ 2.180893] [<c047f0a4>] (sysfs_create_groups) from [<c07df824>] (device_add+0x354/0x580) [ 2.189460] [<c07df824>] (device_add) from [<c0a31da4>] (__thermal_cooling_device_register+0x128/0x39c) [ 2.199300] [<c0a31da4>] (__thermal_cooling_device_register) from [<c0a34864>] (__cpufreq_cooling_register+0x2f4/0x590) [ 2.210589] [<c0a34864>] (__cpufreq_cooling_register) from [<c0a48848>] (cpufreq_ready+0x74/0xc4) [ 2.219882] [<c0a48848>] (cpufreq_ready) from [<c0a465e0>] (cpufreq_online+0x38c/0x648) [ 2.228264] [<c0a465e0>] (cpufreq_online) from [<c0a46958>] (cpufreq_add_dev+0xbc/0xcc) [ 2.236635] [<c0a46958>] (cpufreq_add_dev) from [<c07e0a28>] (subsys_interface_register+0x90/0xcc) [ 2.246015] [<c07e0a28>] (subsys_interface_register) from [<c0a4587c>] (cpufreq_register_driver+0x15c/0x1dc) [ 2.256314] [<c0a4587c>] (cpufreq_register_driver) from [<c0a48c64>] (dt_cpufreq_probe+0x88/0x10c) [ 2.265699] [<c0a48c64>] (dt_cpufreq_probe) from [<c07e3ae4>] (platform_drv_probe+0x50/0xb0) [ 2.274543] [<c07e3ae4>] (platform_drv_probe) from [<c07e215c>] (driver_probe_device+0x228/0x2c8) [ 2.283838] [<c07e215c>] (driver_probe_device) from [<c07e0700>] (bus_for_each_drv+0x60/0x94) [ 2.292761] [<c07e0700>] (bus_for_each_drv) from [<c07e1e54>] (__device_attach+0xb0/0x114) [ 2.301418] [<c07e1e54>] (__device_attach) from [<c07e14dc>] (bus_probe_device+0x84/0x8c) [ 2.309977] [<c07e14dc>] (bus_probe_device) from [<c07e1968>] (deferred_probe_work_func+0x68/0x94) [ 2.319354] [<c07e1968>] (deferred_probe_work_func) from [<c0357d08>] (process_one_work+0x1ec/0x414) [ 2.328919] [<c0357d08>] (process_one_work) from [<c0358bf8>] (worker_thread+0x27c/0x594) [ 2.337485] [<c0358bf8>] (worker_thread) from [<c035d7c0>] (kthread+0xdc/0xf4) [ 2.345054] [<c035d7c0>] (kthread) from [<c0307d38>] (ret_from_fork+0x14/0x3c) [ 2.352633] ---[ end trace 832f1f1ea81d326a ]--- [ 2.359345] Unable to handle kernel NULL pointer dereference at virtual address 00000508 [ 2.367770] pgd = c0204000 [ 2.370063] Unable to handle kernel NULL pointer dereference at virtual address 0000000e [ 2.370064] pgd = [ 00 e] *pgd [PYBOOT] [omap5uevm 00:50]: got exception: panic ~$off

[PYBOOT] [omap5uevm 00:51]: Done.

========================================================================

Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.091576] ------------[ cut here ]------------ [ 2.096448] WARNING: CPU: 0 PID: 20 at /work/build/batch/fs/kernfs/dir.c:483 kernfs_get+0x44/0x48 [ 2.105756] Modules linked in: [ 2.108966] CPU: 0 PID: 20 Comm: kworker/0:1 Not tainted 4.9.0-rc4-next-20161109 #1 [ 2.116982] Hardware name: Generic OMAP5 (Flattened Device Tree) [ 2.123274] Workqueue: events deferred_probe_work_func [ 2.128665] [<c03103e4>] (unwind_backtrace) from [<c030b9a0>] (show_stack+0x10/0x14) [ 2.136777] [<c030b9a0>] (show_stack) from [<c059ccfc>] (dump_stack+0x88/0x9c) [ 2.144343] [<c059ccfc>] (dump_stack) from [<c0341c58>] (__warn+0xe8/0x100) [ 2.151630] [<c0341c58>] (__warn) from [<c0341d20>] (warn_slowpath_null+0x20/0x28) [ 2.159556] [<c0341d20>] (warn_slowpath_null) from [<c047ae78>] (kernfs_get+0x44/0x48) [ 2.167853] [<c047ae78>] (kernfs_get) from [<c047ea78>] (internal_create_group+0x6c/0x2f8) [ 2.176507] [<c047ea78>] (internal_create_group) from [<c047f0a4>] (sysfs_create_groups+0x44/0x84) [ 2.185888] [<c047f0a4>] (sysfs_create_groups) from [<c07df824>] (device_add+0x354/0x580) [ 2.194451] [<c07df824>] (device_add) from [<c0a31da4>] (__thermal_cooling_device_register+0x128/0x39c) [ 2.204283] [<c0a31da4>] (__thermal_cooling_device_register) from [<c0a34864>] (__cpufreq_cooling_register+0x2f4/0x590) [ 2.215574] [<c0a34864>] (__cpufreq_cooling_register) from [<c0a48848>] (cpufreq_ready+0x74/0xc4) [ 2.224873] [<c0a48848>] (cpufreq_ready) from [<c0a465e0>] (cpufreq_online+0x38c/0x648) [ 2.233257] [<c0a465e0>] (cpufreq_online) from [<c0a46958>] (cpufreq_add_dev+0xbc/0xcc) [ 2.241638] [<c0a46958>] (cpufreq_add_dev) from [<c07e0a28>] (subsys_interface_register+0x90/0xcc) [ 2.251026] [<c07e0a28>] (subsys_interface_register) from [<c0a4587c>] (cpufreq_register_driver+0x15c/0x1dc) [ 2.261321] [<c0a4587c>] (cpufreq_register_driver) from [<c0a48c64>] (dt_cpufreq_probe+0x88/0x10c) [ 2.270706] [<c0a48c64>] (dt_cpufreq_probe) from [<c07e3ae4>] (platform_drv_probe+0x50/0xb0) [ 2.279540] [<c07e3ae4>] (platform_drv_probe) from [<c07e215c>] (driver_probe_device+0x228/0x2c8) [ 2.288832] [<c07e215c>] (driver_probe_device) from [<c07e0700>] (bus_for_each_drv+0x60/0x94) [ 2.297759] [<c07e0700>] (bus_for_each_drv) from [<c07e1e54>] (__device_attach+0xb0/0x114) [ 2.306408] [<c07e1e54>] (__device_attach) from [<c07e14dc>] (bus_probe_device+0x84/0x8c) [ 2.314971] [<c07e14dc>] (bus_probe_device) from [<c07e1968>] (deferred_probe_work_func+0x68/0x94) [ 2.324354] [<c07e1968>] (deferred_probe_work_func) from [<c0357d08>] (process_one_work+0x1ec/0x414) [ 2.333918] [<c0357d08>] (process_one_work) from [<c0358bf8>] (worker_thread+0x27c/0x594) [ 2.342485] [<c0358bf8>] (worker_thread) from [<c035d7c0>] (kthread+0xdc/0xf4) [ 2.350048] [<c035d7c0>] (kthread) from [<c0307d38>] (ret_from_fork+0x14/0x3c) [ 2.357646] ---[ end trace d5f0c6d9040cd72f ]---

[PYBOOT] [omap5uevm 02:04]: Timed out waiting for "<type 'str'>":

[PYBOOT] [omap5uevm 02:05]: got exception: timeout ~$off

[PYBOOT] [omap5uevm 02:06]: Done.

========================================================================

Board omap5uevm-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 27.141387] 2ca0: 00000000 ee682cc0 c034c920 c0351650 00000193 ffffffff [ 27.148310] [<c030be78>] (__dabt_svc) from [<c0351650>] (kthread_data+0x4/0xc) [ 27.155877] [<c0351650>] (kthread_data) from [<c034c920>] (wq_worker_sleeping+0x8/0xb8) [ 27.164260] [<c034c920>] (wq_worker_sleeping) from [<c0b86888>] (__schedule+0x304/0x454) [ 27.172727] [<c0b86888>] (__schedule) from [<c0b86a1c>] (schedule+0x44/0x9c) [ 27.180115] [<c0b86a1c>] (schedule) from [<c033a208>] (do_exit+0x7a0/0x8f4) [ 27.187409] [<c033a208>] (do_exit) from [<c030b7b4>] (die+0x328/0x394) [ 27.194240] [<c030b7b4>] (die) from [<c031aa70>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 27.202531] [<c031aa70>] (__do_kernel_fault.part.0) from [<c0315d04>] (do_page_fault+0x36c/0x380) [ 27.211812] [<c0315d04>] (do_page_fault) from [<c0301298>] (do_DataAbort+0x3c/0xb8) [ 27.219822] [<c0301298>] (do_DataAbort) from [<c030be78>] (__dabt_svc+0x58/0x80) [ 27.227569] Exception stack(0xee682ea8 to 0xee682ef0) [ 27.232852] 2ea0: ee67c440 00000000 fffffffc 00000000 ee67c440 00000000 [ 27.241412] 2ec0: c12341f8 00000000 ee67c66c c0b86a1c c0351652 ee682f44 00000000 ee682ef8 [ 27.249973] 2ee0: c034c920 c0351650 00000193 ffffffff [ 27.255255] [<c030be78>] (__dabt_svc) from [<c0351650>] (kthread_data+0x4/0xc) [ 27.262807] [<c0351650>] (kthread_data) from [<c034c920>] (wq_worker_sleeping+0x8/0xb8) [ 27.271192] [<c034c920>] (wq_worker_sleeping) from [<c0b86888>] (__schedule+0x304/0x454) [ 27.279662] [<c0b86888>] (__schedule) from [<c0b86a1c>] (schedule+0x44/0x9c) [ 27.287045] [<c0b86a1c>] (schedule) from [<c033a208>] (do_exit+0x7a0/0x8f4) [ 27.294325] [<c033a208>] (do_exit) from [<c030b7b4>] (die+0x328/0x394) [ 27.301159] [<c030b7b4>] (die) from [<c031aa70>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 27.309449] [<c031aa70>] (__do_kernel_fault.part.0) from [<c0315d04>] (do_page_fault+0x36c/0x380) [ 27.318738] [<c0315d04>] (do_page_fault) from [<c0301298>] (do_DataAbort+0x3c/0xb8) [ 27.326758] [<c0301298>] (do_DataAbort) from [<c030be78>] (__dabt_svc+0x58/0x80) [ 27.334495] Exception stack(0xee6830e0 to 0xee683128) [ 27.339785] 30e0: ee67c440 00000000 fffffffd 00000000 ee67c440 00000000 c12341f8 00000000 [ 27.348350] 3100: ee67c66c c0b86a1c c0351652 ee68317c 00000000 ee683130 c034c920 c0351650 [ 27.356908] 3120: 00000193 ffffffff [ 27.360554] [<c030be78>] (__dabt_svc) from [<c0351650>] (kthread_data+0x4/0xc) [ 27.368116] [<c0351650>] (kthread_data) from [<c034c920>] (wq_worker_sleeping+0x8/0xb8) [ 27.376503] [<c034c920>] (wq_worker_sleeping) from [<c0b86888>] (__schedule+0x304/0x454) [ 27.384964] [<c0b86888>] (__schedule) from [<c0b86a1c>] (schedule+0x44/0x9c) [ 27.392345] [<c0b86a1c>] (schedule) from [<c033a208>] (do_exit+0x7a0/0x8f4) [ 27.399635] [<c033a208>] (do_exit) from [<c030b7b4>] (die+0x328/0x394) [ 27.406462] [<c030b7b4>] (die) from [<c03 [PYBOOT] [omap5uevm 02:06]: got exception: panic ~$off

[PYBOOT] [omap5uevm 02:08]: Done.

========================================================================

Board pi-arm-exynos_defconfig failure log: -------------------------------------------------

[ 3.878976] ---[ end trace a4c9772f6cf3a1d7 ]--- [ 3.883571] Fixing recursive fault but reboot is needed! [ 21.031722] BUG: spinlock lockup suspected on CPU#0, kworker/0:3/68 [ 21.036504] lock: 0xee755a80, .magic: dead4ead, .owner: kworker/0:3/68, .owner_cpu: 0 [ 21.044397] CPU: 0 PID: 68 Comm: kworker/0:3 Tainted: G D 4.9.0-rc4-next-20161109 #1 [ 21.053244] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 21.059327] [<c010e0a4>] (unwind_backtrace) from [<c010ad4c>] (show_stack+0x10/0x14) [ 21.067045] [<c010ad4c>] (show_stack) from [<c0330220>] (dump_stack+0x78/0x8c) [ 21.074244] [<c0330220>] (dump_stack) from [<c015bf0c>] (do_raw_spin_lock+0xfc/0x1e0) [ 21.082048] [<c015bf0c>] (do_raw_spin_lock) from [<c06f6444>] (__schedule+0x7c/0x480) [ 21.089854] [<c06f6444>] (__schedule) from [<c06f6894>] (schedule+0x4c/0xac) [ 21.096881] [<c06f6894>] (schedule) from [<c011dc58>] (do_exit+0x850/0xa14) [ 21.103822] [<c011dc58>] (do_exit) from [<c010af88>] (die+0x238/0x2f4) [ 21.110332] [<c010af88>] (die) from [<c0114ed8>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 21.118225] [<c0114ed8>] (__do_kernel_fault.part.0) from [<c01108e8>] (do_bad_area+0x0/0x8c) [ 21.126638] [<c01108e8>] (do_bad_area) from [<c0110654>] (do_page_fault+0x0/0x294) [ 21.134184] [<c0110654>] (do_page_fault) from [<00000000>] ( (null)) [ 21.140602] NMI backtrace for cpu 0 [ 21.144072] CPU: 0 PID: 68 Comm: kworker/0:3 Tainted: G D 4.9.0-rc4-next-20161109 #1 [ 21.152920] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 21.159000] [<c010e0a4>] (unwind_backtrace) from [<c010ad4c>] (show_stack+0x10/0x14) [ 21.166717] [<c010ad4c>] (show_stack) from [<c0330220>] (dump_stack+0x78/0x8c) [ 21.173919] [<c0330220>] (dump_stack) from [<c0333a88>] (nmi_cpu_backtrace+0xb0/0xb4) [ 21.181726] [<c0333a88>] (nmi_cpu_backtrace) from [<c0333b9c>] (nmi_trigger_cpumask_backtrace+0x110/0x154) [ 21.191353] [<c0333b9c>] (nmi_trigger_cpumask_backtrace) from [<c015bf1c>] (do_raw_spin_lock+0x10c/0x1e0) [ 21.200895] [<c015bf1c>] (do_raw_spin_lock) from [<c06f6444>] (__schedule+0x7c/0x480) [ 21.208702] [<c06f6444>] (__schedule) from [<c06f6894>] (schedule+0x4c/0xac) [ 21.215729] [<c06f6894>] (schedule) from [<c011dc58>] (do_exit+0x850/0xa14) [ 21.222670] [<c011dc58>] (do_exit) from [<c010af88>] (die+0x238/0x2f4) [ 21.229176] [<c010af88>] (die) from [<c0114ed8>] (__do_kernel_fault.part.0+0x64/0x1e4) [ 21.237070] [<c0114ed8>] (__do_kernel_fault.part.0) from [<c01108e8>] (do_bad_area+0x0/0x8c) [ 21.245485] [<c01108e8>] (do_bad_area) from [<c0110654>] (do_page_fault+0x0/0x294) [ 21.253031] [<c0110654>] (do_page_fault) from [<00000000>] ( (null))

[PYBOOT] [pi 01:49]: Timed out waiting for "<type 'str'>":

[PYBOOT] [pi 01:50]: got exception: timeout ~$off

[PYBOOT] [pi 01:51]: Done.

========================================================================

Board pit-arm-exynos_defconfig failure log: -------------------------------------------------

[ 3.252128] input: gpio-keys as /devices/platform/gpio-keys/input/input2 [ 3.259158] snow-audio sound: ASoC: CPU DAI (null) not registered [ 3.264096] snow-audio sound: snd_soc_register_card failed (-517) [ 3.270881] max77686-rtc max77802-rtc: hctosys: unable to read the hardware clock [ 3.278673] vdd_1v2_2: disabling [ 3.280805] TPS65090_RAILSDCDC3: disabling [ 3.284719] TPS65090_RAILSLDO1: disabling [ 3.288738] TPS65090_RAILSLDO2: disabling [ 3.292717] ALSA device list: [ 3.295664] No soundcards found. [ 3.300864] EXT4-fs (mmcblk0p1): couldn't mount as ext3 due to feature incompatibilities [ 3.317364] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null) [ 3.324054] VFS: Mounted root (ext4 filesystem) readonly on device 179:1. [ 3.332829] devtmpfs: mounted [ 3.335178] Freeing unused kernel memory: 1024K [ 3.342671] Unhandled fault: imprecise external abort (0x1406) at 0x00000000 [ 3.348236] pgd = ed44c000 [ 3.350925] [00000000] *pgd=fa02c835

[PYBOOT] [pit 00:30]: kernel: finished booting, starting userspace. [ 3.365457] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 [ 3.365457] [ 3.373109] CPU: 0 PID: 1 Comm: init Not tainted 4.9.0-rc4-next-20161109 #1 [ 3.380046] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 3.386140] [<c010e0a4>] (unwind_backtrace) from [<c010ad4c>] (show_stack+0x10/0x14) [ 3.393849] [<c010ad4c>] (show_stack) from [<c0330220>] (dump_stack+0x78/0x8c) [ 3.401050] [<c0330220>] (dump_stack) from [<c019b898>] (panic+0xdc/0x258) [ 3.407901] [<c019b898>] (panic) from [<c011ddf8>] (do_exit+0x9f0/0xa14) [ 3.414577] [<c011ddf8>] (do_exit) from [<c011ea84>] (do_group_exit+0x3c/0xbc) [ 3.421778] [<c011ea84>] (do_group_exit) from [<c012808c>] (get_signal+0x220/0x5a4) [ 3.429411] [<c012808c>] (get_signal) from [<c010a494>] (do_signal+0xc4/0x418) [ 3.436612] [<c010a494>] (do_signal) from [<c010a98c>] (do_work_pending+0x94/0xa4) [ 3.444158] [<c010a98c>] (do_work_pending) from [<c0107714>] (slow_work_pending+0xc/0x20) [ 3.452326] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000007 [ 3.452326]

[PYBOOT] [pit 00:31]: got exception: panic ~$off

[PYBOOT] [pit 00:32]: Done.

========================================================================

Board seattle-arm64-defconfig failure log: -------------------------------------------------

[ 6.488653] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 6.542095] sda: sda1 sda2 sda3 sda4 sda5 [ 6.546682] sd 1:0:0:0: [sda] Attached SCSI disk [ 6.787679] ata3: SATA link down (SStatus 0 SControl 300) [ 7.107678] ata4: SATA link down (SStatus 0 SControl 300) [ 7.427678] ata5: SATA link down (SStatus 0 SControl 300) [ 7.747677] ata6: SATA link down (SStatus 0 SControl 300) [ 8.067677] ata7: SATA link down (SStatus 0 SControl 300) [ 8.387685] ata8: SATA link down (SStatus 0 SControl 300) [ 8.422785] EXT4-fs (sda5): couldn't mount as ext3 due to feature incompatibilities [ 8.463240] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 8.470904] VFS: Mounted root (ext4 filesystem) readonly on device 8:5. [ 8.494461] devtmpfs: mounted [ 8.497705] Freeing unused kernel memory: 1024K

[PYBOOT] [seattle 02:16]: kernel: finished booting, starting userspace. Mount failed for selinuxfs on /sys/fs/selinux: No such file or directory INIT: version 2.88 booting [ 8.931827] random: fast init done [info] Using makefile-style concurrent boot in runlevel S. [....] Starting the hotplug events dispatcher: systemd-udevdstarting version 227 [?25l[?1c7[ ok 8[?25h[?0c. [....] Synthesizing the initial hotplug events...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Setting up keyboard layout...[ 11.142169] random: crng init done [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 11.497965] EXT4-fs (sda5): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Starting early crypto disks...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Starting remaining crypto disks...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.28

[PYBOOT] [seattle 04:46]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seattle 04:47]: got exception: timeout ~$off

[PYBOOT] [seattle 04:48]: Done.

========================================================================

Board seattle-arm64-nosmp_defconfig failure log: -------------------------------------------------

[ 6.813635] ata3: SATA link down (SStatus 0 SControl 300) [ 7.133630] ata4: SATA link down (SStatus 0 SControl 300) [ 7.453634] ata5: SATA link down (SStatus 0 SControl 300) [ 7.773631] ata6: SATA link down (SStatus 0 SControl 300) [ 8.093630] ata7: SATA link down (SStatus 0 SControl 300) [ 8.413630] ata8: SATA link down (SStatus 0 SControl 300) [ 8.451110] EXT4-fs (sda5): couldn't mount as ext3 due to feature incompatibilities [ 8.468042] EXT4-fs (sda5): INFO: recovery required on readonly filesystem [ 8.474915] EXT4-fs (sda5): write access will be enabled during recovery [ 8.525029] EXT4-fs (sda5): recovery complete [ 8.542925] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 8.550590] VFS: Mounted root (ext4 filesystem) readonly on device 8:5. [ 8.572791] devtmpfs: mounted [ 8.576024] Freeing unused kernel memory: 1024K

[PYBOOT] [seattle 01:53]: kernel: finished booting, starting userspace. Mount failed for selinuxfs on /sys/fs/selinux: No such file or directory [ 8.861129] random: fast init done INIT: version 2.88 booting [info] Using makefile-style concurrent boot in runlevel S. [....] Starting the hotplug events dispatcher: systemd-udevdstarting version 227 [?25l[?1c7[ ok 8[?25h[?0c. [....] Synthesizing the initial hotplug events...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Setting up keyboard layout...[ 11.104867] random: crng init done [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 11.409619] EXT4-fs (sda5): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Starting early crypto disks...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Starting remaining crypto disks...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.28

[PYBOOT] [seattle 04:23]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seattle 04:24]: got exception: timeout ~$off

[PYBOOT] [seattle 04:26]: Done.

========================================================================

Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.911401] vbat-supply: disabling [ 1.914236] EXT4-fs (mmcblk0p3): couldn't mount as ext3 due to feature incompatibilities [ 1.921827] EXT4-fs (mmcblk0p3): couldn't mount as ext2 due to feature incompatibilities [ 1.931518] mmc2: new high speed SDIO card at address 0001 [ 1.853355] mmcblk0boot0: mmc0:0001 SEM16G partition 1 4.00 MiB [ 1.860852] mmcblk0boot1: mmc0:0001 SEM16G partition 2 4.00 MiB [ 1.865415] mmcblk0rpmb: mmc0:0001 SEM16G partition 3 4.00 MiB [ 1.936225] Unable to handle kernel paging request at virtual address c130d4b8 [ 1.960345] pgd = c0204000 [ 1.963036] [c130d4b8] *pgd=4120041e(bad) [ 1.967031] Internal error: Oops: 8000000d [#1] ARM [ 1.971890] Modules linked in: [ 1.974931] CPU: 0 PID: 0 Comm: swapper Tainted: G W 4.9.0-rc4-next-20161109 #1 [ 1.983346] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 1.989423] task: c1206800 task.stack: c1200000 [ 1.993938] PC is at 0xc130d4b8 [ 1.997067] LR is at cpu_pm_pmu_notify+0x70/0xb4 [ 2.001663] pc : [<c130d4b8>] lr : [<c0a7100c>] psr: 600001d3 [ 2.001663] sp : c1201f88 ip : 00000000 fp : 000000a0 [ 2.013120] r10: 00000000 r9 : 00000001 r8 : c130dff4 [ 2.018327] r7 : c130dfb4 r6 : c130d4b8 r5 : 00000000 r4 : c12028c8 [ 2.024837] r3 : 00000006 r2 : 00000000 r1 : 00000006 r0 : 00000000 [ 2.031349] Flags: nZCv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none [ 2.038638] Control: 10c53c7d Table: 40204059 DAC: 00000051 [ 2.044367] Process swapper (pid: 0, stack limit = 0xc1200218) [ 2.050184] Stack: (0xc1201f88 to 0xc1202000) [ 2.054526] 1f80: c130d4b0 c12028d0 c1239ac8 c130df54 c1201fac c0b86a1c [ 2.062684] 1fa0: c1200000 c12028c8 c1201fb4 c0b86c24 00000000 c035c5a8 ffffffff c1100c50 [ 2.070843] 1fc0: ffffffff ffffffff 00000000 c1100684 00000000 c1194a28 c131d1d4 c1202858 [ 2.079003] 1fe0: c1194a24 c1207a0c 40204059 410fc0f4 00000000 40208078 00000000 00000000 [ 2.087170] [<c0a7100c>] (cpu_pm_pmu_notify) from [<c0b86a1c>] (schedule+0x44/0x9c) [ 2.094803] Code: c130d5e8 00000000 c130d4b8 00000000 (00000003) [ 2.100877] ---[ end trace 9c955b874af3d0b9 ]--- [ 2.105476] Kernel panic - not syncing: Attempted to kill the idle task! [ 2.112159] ---[ end Kernel panic - not syncing: Attempted to kill the idle task!

[PYBOOT] [snow 00:46]: got exception: panic ~$off

[PYBOOT] [snow 00:47]: Done.

========================================================================

Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------

[ 8.992889] [<c010e79c>] (unwind_backtrace) from [<c010b048>] (show_stack+0x10/0x14) [ 9.000640] [<c010b048>] (show_stack) from [<c030da14>] (dump_stack+0x84/0x98) [ 9.007873] [<c030da14>] (dump_stack) from [<c011b5a0>] (__warn+0xe8/0x100) [ 9.014831] [<c011b5a0>] (__warn) from [<c011b668>] (warn_slowpath_null+0x20/0x28) [ 9.022399] [<c011b668>] (warn_slowpath_null) from [<c016b478>] (rcu_note_context_switch+0x188/0x320) [ 9.031616] [<c016b478>] (rcu_note_context_switch) from [<c0614ec0>] (__schedule+0x5c/0x4d8) [ 9.040069] [<c0614ec0>] (__schedule) from [<c061538c>] (schedule+0x50/0xb4) [ 9.047088] [<c061538c>] (schedule) from [<c0615788>] (schedule_preempt_disabled+0x28/0x40) [ 9.055450] [<c0615788>] (schedule_preempt_disabled) from [<c0154c24>] (cpu_startup_entry+0x178/0x20c) [ 9.064758] [<c0154c24>] (cpu_startup_entry) from [<0010156c>] (0x10156c) [ 9.071533] ---[ end trace 70b8db8d23a8fd7b ]--- [ 9.148834] random: crng init done [....] Configuring network interfaces...[ 9.419036] smsc911x 50000000.ethernet eth0: MAC Address: 08:00:08:1e:0f:44 Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

[ 9.700500] SMSC LAN8700 50000000.etherne:01: attached PHY driver [SMSC LAN8700] (mii_bus:phy_addr=50000000.etherne:01, irq=-1) [ 9.740478] smsc911x 50000000.ethernet eth0: SMSC911x/921x identified at 0xf09f0000, IRQ: 219 [ 9.749694] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/08:00:08:1e:0f:44 Sending on LPF/eth0/08:00:08:1e:0f:44 Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 [ 11.890899] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 7 Connected. cu: Got hangup signal cu: waitpid: No child processes Connected.

Disconnected.

[PYBOOT] [snowball 03:16]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 03:17]: got exception: timeout ~$off

[PYBOOT] [snowball 03:18]: Done.

========================================================================

Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

[ 22.492124] blk_update_request: I/O error, dev mmcblk0, sector 4557320 [ 22.503559] mmcblk0: error -110 sending status command, retrying [ 22.511979] mmcblk0: error -110 sending status command, retrying [ 22.520396] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty" [ 22.531435] mmcblk0: error -110 sending status command, retrying [ 22.540065] mmcblk0: error -110 sending status command, retrying [ 22.548479] mmcblk0: error -110 sending status command, aborting [ 22.559446] mmcblk0: error -110 sending status command, retrying [ 22.567856] mmcblk0: error -110 sending status command, retrying [ 22.576263] mmcblk0: error -110 sending status command, aborting [ 22.587258] mmcblk0: error -110 sending status command, retrying [ 22.595662] mmcblk0: error -110 sending status command, retrying [ 22.604087] mmcblk0: error -110 sending status command, aborting INIT: INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty" cannot execute "/sbin/getty"

INIT: cannot execute "/sbin/getty" INIT: Id "1" respawning too fast: disabled for 5 minutes [ 22.662242] mmcblk0: error -110 sending status command, retrying INIT: Id "3" respawning too fast: disab[ 22.670721] mmcblk0: error -110 sending status command, retrying led for 5 minutes INIT: Id "6"[ 22.681962] mmcblk0: error -110 sending status command, aborting respawning too fast: disabled for 5 minutes [ 22.693398] mmcblk0: error -110 sending status command, retrying [ 22.701825] mmcblk0: error -110 sending status command, retrying [ 22.710245] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty"

INIT: Id "5" respawning too fast: disabled for 5 minutes INIT: Id "2" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 81.778046] random: crng init done

[PYBOOT] [wandboard 02:56]: Timed out waiting for "<type 'str'>":

[PYBOOT] [wandboard 02:57]: got exception: timeout ~$off

[PYBOOT] [wandboard 02:58]: Done.