Full logs are available at http://arm-soc.lixom.net/bootlogs/mainline/v4.6-rc6-128-gc5e0666/

Failed boards:

arndale arm-multi_v7_nosmp_defconfig : FAILED 20:01.57 bbb arm-omap2plus_defconfig : FAILED 1:54.70 bbb arm-multi_v7_defconfig : FAILED 1:59.28 bbb arm-multi_v7_nosmp_defconfig : FAILED 2:23.02 beagleboard-x15 arm-omap2plus_defconfig : FAILED 1:44.34 beagleboard-x15 arm-multi_v7_defconfig : FAILED 1:48.13 beagleboard-x15 arm-multi_lpae_defconfig : FAILED 1:48.72 beagleboard-x15 arm-multi_v7_nosmp_defconfig : FAILED 2:06.27 chitra powerpc-pasemi_defconfig : BUILD FAILED colombus arm-multi_v7_nosmp_defconfig : FAILED 3:20.12 cosmic arm-imx_v6_v7_defconfig : FAILED 2:01.92 cosmic arm-multi_v7_defconfig : FAILED 2:10.13 cosmic arm-multi_v7_nosmp_defconfig : FAILED 2:18.16 dalmore arm-tegra_defconfig : FAILED 1:49.30 dalmore arm-multi_v7_defconfig : FAILED 2:00.78 dalmore arm-multi_lpae_defconfig : FAILED 2:15.26 dalmore arm-multi_v7_nosmp_defconfig : FAILED 1:54.34 minnowmax minnowmax_defconfig : NO BUILD odroidu3 arm-exynos_defconfig : FAILED 1:53.89 omap5uevm arm-multi_v7_defconfig : FAILED 0:54.52 omap5uevm arm-multi_lpae_defconfig : FAILED 0:52.03 omap5uevm arm-multi_v7_nosmp_defconfig : FAILED 1:13.76 seaboard arm-tegra_defconfig : FAILED 1:53.12 seaboard arm-multi_v7_defconfig : FAILED 1:55.45 seaboard arm-multi_v7_nosmp_defconfig : FAILED 1:55.75 snow arm-multi_v7_nosmp_defconfig : FAILED 3:13.25 snowball arm-u8500_defconfig : FAILED 1:59.37 snowball arm-multi_v7_defconfig : FAILED 2:05.13 snowball arm-multi_v7_nosmp_defconfig : FAILED 2:02.39 wandboard arm-imx_v6_v7_defconfig : FAILED 2:57.85

Successful boards:

apc arm-vt8500_v6_v7_defconfig : passed 1:14.25 arndale arm-exynos_defconfig : passed 1:32.07 arndale arm-multi_v7_defconfig : passed 1:18.13 arndale arm-multi_lpae_defconfig : passed 1:28.27 capri arm-bcm_defconfig : passed 0:46.95 capri arm-multi_v7_defconfig : passed 0:53.81 capri arm-multi_v7_nosmp_defconfig : warnings 0:56.14 chitra powerpc-ppc64_defconfig : passed 2:13.47 colombus arm-sunxi_defconfig : passed 2:25.03 colombus arm-multi_v7_defconfig : passed 3:05.86 colombus arm-multi_lpae_defconfig : passed 2:33.70 cubie arm-sunxi_defconfig : passed 0:52.12 cubie arm-multi_v7_defconfig : passed 0:48.52 cubie arm-multi_v7_nosmp_defconfig : passed 1:00.27 cubie2 arm-sunxi_defconfig : passed 0:48.32 cubie2 arm-multi_v7_defconfig : passed 0:55.02 cubie2 arm-multi_lpae_defconfig : passed 2:10.86 cubie2 arm-multi_v7_nosmp_defconfig : warnings 1:06.28 cubox arm-multi_v7_defconfig : passed 1:17.06 cubox arm-mvebu_v7_defconfig : passed 1:04.11 cubox arm-multi_v7_nosmp_defconfig : passed 1:30.32 hummingboard arm-imx_v6_v7_defconfig : passed 1:30.56 hummingboard arm-multi_v7_defconfig : passed 1:39.07 hummingboard arm-multi_v7_nosmp_defconfig : warnings 1:18.09 jetsontk1 arm-tegra_defconfig : passed 1:42.63 jetsontk1 arm-multi_v7_defconfig : passed 1:43.83 jetsontk1 arm-multi_lpae_defconfig : passed 1:49.06 jetsontk1 arm-multi_v7_nosmp_defconfig : warnings 1:38.33 omap5uevm arm-omap2plus_defconfig : passed 1:04.37 pandaes arm-omap2plus_defconfig : warnings 1:43.37 pandaes arm-multi_v7_defconfig : passed 1:48.54 pandaes arm-multi_v7_nosmp_defconfig : warnings 1:43.73 pi arm-exynos_defconfig : passed 2:10.98 pi arm-multi_v7_defconfig : passed 2:23.78 pi arm-multi_lpae_defconfig : passed 2:30.44 pi arm-multi_v7_nosmp_defconfig : warnings 2:09.56 pit arm-exynos_defconfig : passed 2:12.73 pit arm-multi_v7_defconfig : passed 2:14.96 pit arm-multi_lpae_defconfig : passed 2:29.20 pit arm-multi_v7_nosmp_defconfig : warnings 2:13.29 seattle arm64-defconfig : warnings 2:20.03 snow arm-exynos_defconfig : passed 2:08.97 snow arm-multi_v7_defconfig : passed 2:21.35 snow arm-multi_lpae_defconfig : passed 1:59.36 trimslice arm-tegra_defconfig : passed 2:44.01 trimslice arm-multi_v7_defconfig : passed 2:56.80 trimslice arm-multi_v7_nosmp_defconfig : warnings 1:39.09 wandboard arm-multi_v7_defconfig : passed 1:19.69 wandboard arm-multi_v7_nosmp_defconfig : warnings 1:12.98

Offline boards:

beaver arm-tegra_defconfig : OFFLINE 2:13.39 beaver arm-multi_v7_defconfig : OFFLINE 2:28.18 beaver arm-multi_v7_nosmp_defconfig : OFFLINE 2:13.69 colibri-vf61 arm-imx_v6_v7_defconfig : OFFLINE 1:15.65 colibri-vf61 arm-multi_v7_defconfig : OFFLINE 1:17.00 colibri-vf61 arm-multi_v7_nosmp_defconfig : OFFLINE 1:20.84 parallella arm-multi_v7_defconfig : OFFLINE 2:25.53 parallella arm-multi_v7_nosmp_defconfig : OFFLINE 2:21.41 rk3288evb arm-multi_v7_defconfig : OFFLINE 0:45.33 rk3288evb arm-multi_lpae_defconfig : OFFLINE 1:00.01 rk3288evb arm-multi_v7_nosmp_defconfig : OFFLINE 0:46.20 sama5 arm-sama5_defconfig : OFFLINE 2:17.15 sama5d3-xplained arm-sama5_defconfig : OFFLINE 2:30.85 socfpga arm-socfpga_defconfig : OFFLINE 2:20.88 socfpga arm-multi_v7_defconfig : OFFLINE 2:34.02 socfpga arm-multi_v7_nosmp_defconfig : OFFLINE 2:14.21

Board legend is available at http://arm-soc.lixom.net/boards.html

Board arndale-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.580109] usbcore: registered new interface driver zaurus [ 1.585689] usbcore: registered new interface driver cdc_ncm [ 1.591981] usb_phy_generic.0.auto supply vcc not found, using dummy regulator [ 1.598598] usb_phy_generic.1.auto supply vcc not found, using dummy regulator [ 1.605726] exynos-dwc3 usb@12000000: no suspend clk specified [ 1.611512] usb@12000000 supply vdd33 not found, using dummy regulator [ 1.618030] usb@12000000 supply vdd10 not found, using dummy regulator [ 1.626393] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.631462] ehci-pci: EHCI PCI platform driver [ 1.635906] ehci-platform: EHCI generic platform driver [ 1.641232] ehci-omap: OMAP-EHCI Host Controller driver [ 1.646377] ehci-orion: EHCI orion driver [ 1.650371] SPEAr-ehci: EHCI SPEAr driver [ 1.654366] ehci-st: EHCI STMicroelectronics driver [ 1.659233] ehci-exynos: EHCI EXYNOS driver [ 1.663481] ehci-atmel: EHCI Atmel driver [ 1.667386] tegra-ehci: Tegra EHCI driver [ 1.671397] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.677463] ohci-pci: OHCI PCI platform driver [ 1.681912] ohci-platform: OHCI generic platform driver [ 1.687197] ohci-omap3: OHCI OMAP3 driver [ 1.691167] SPEAr-ohci: OHCI SPEAr driver [ 1.695163] ohci-st: OHCI STMicroelectronics driver [ 1.700019] ohci-atmel: OHCI Atmel driver [ 1.704293] xhci-hcd xhci-hcd.2.auto: xHCI Host Controller [ 1.709414] xhci-hcd xhci-hcd.2.auto: new USB bus registered, assigned bus number 1 [ 1.717232] xhci-hcd xhci-hcd.2.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 4.6.0-rc6-00128-gc5e0666 (build@brutus) (gcc version 6.1.0 (GCC) ) #1 Thu May 5 08:51:55 PDT 2016 [ 0.000000] CPU: ARMv7 Processor [410fc0f4] revision 4 (ARMv7), cr=10c53c7d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] Machine model: Insignal Arndale evaluation board based on EXYNOS5250 [ 0.000000] cma: Reserved 64 MiB at 0xbc000000 [ 0.000000] Memory policy: Data cache writeback [ 0.000000] [PYBOOT] [arndale 19:55]: got exception: maximum recursion depth exceeded ~$off

[PYBOOT] [arndale 19:57]: Done. Board bbb-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.631096] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.641360] ledtrig-cpu: registered to indicate activity on CPUs [ 1.648433] usbcore: registered new interface driver usbhid [ 1.654361] usbhid: USB HID core driver [ 1.666360] NET: Registered protocol family 10 [ 1.672944] sit: IPv6 over IPv4 tunneling driver [ 1.679083] NET: Registered protocol family 17 [ 1.683840] can: controller area network core (rev 20120528 abi 9) [ 1.690481] NET: Registered protocol family 29 [ 1.695201] can: raw protocol (rev 20120528) [ 1.699718] can: broadcast manager protocol (rev 20120528 t) [ 1.705712] can: netlink gateway (rev 20130117) max_hops=1 [ 1.712460] Key type dns_resolver registered [ 1.717364] omap_voltage_late_init: Voltage driver support not added [ 1.725629] ThumbEE CPU extension supported. [ 1.730265] Registering SWP/SWPB emulation handler [ 1.772640] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 1.779169] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.786948] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.795635] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.803557] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.811385] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.819190] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.826533] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.835206] cpufreq: cpufreq_online: CPU0: Running at unlisted freq: 550000 KHz [ 1.843126] cpufreq: cpufreq_online: CPU0: Unlisted initial frequency changed to: 600000 KHz [ 1.852865] mmc1: new high speed MMC card at address 0001 [ 1.860111] hctosys: unable to open rtc device (rtc0) [ 1.873084] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.879100] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.886087] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.894930] mmcblk1: p1 p2 [ 1.900646] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [bbb 01:56]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:57]: got exception: timeout ~$off

[PYBOOT] [bbb 01:58]: Done. Board bbb-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.317450] sdhci: Secure Digital Host Controller Interface driver [ 1.323970] sdhci: Copyright(c) Pierre Ossman [ 1.329773] omap_hsmmc 48060000.mmc: Got CD GPIO [ 1.392854] Synopsys Designware Multimedia Card Interface Driver [ 1.400233] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.409417] ledtrig-cpu: registered to indicate activity on CPUs [ 1.416171] usbcore: registered new interface driver usbhid [ 1.422047] usbhid: USB HID core driver [ 1.431634] NET: Registered protocol family 10 [ 1.438111] sit: IPv6 over IPv4 tunneling driver [ 1.443983] NET: Registered protocol family 17 [ 1.448721] can: controller area network core (rev 20120528 abi 9) [ 1.455314] NET: Registered protocol family 29 [ 1.460010] can: raw protocol (rev 20120528) [ 1.464522] can: broadcast manager protocol (rev 20120528 t) [ 1.470495] can: netlink gateway (rev 20130117) max_hops=1 [ 1.476995] Key type dns_resolver registered [ 1.481863] omap_voltage_late_init: Voltage driver support not added [ 1.489663] ThumbEE CPU extension supported. [ 1.502219] at24 0-0050: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.509776] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 1.517820] at24 2-0054: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.525554] at24 2-0055: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.533237] at24 2-0056: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.540918] at24 2-0057: 32768 byte 24c256 EEPROM, writable, 1 bytes/write [ 1.548199] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 1.555861] hctosys: unable to open rtc device (rtc0) [ 1.566596] Waiting for root device /dev/mmcblk0p2... [ 1.602113] mmc1: new high speed MMC card at address 0001 [ 1.608574] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 1.613642] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 1.620121] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 1.628554] mmcblk1: p1 p2

[PYBOOT] [bbb 02:20]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 02:21]: got exception: timeout ~$off

[PYBOOT] [bbb 02:22]: Done. Board bbb-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.049111] omap_hsmmc 481d8000.mmc: lookup for GPIO cd failed [ 2.055246] omap_hsmmc 481d8000.mmc: GPIO lookup for consumer wp [ 2.061593] omap_hsmmc 481d8000.mmc: using device tree for GPIO lookup [ 2.068488] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@481d8000[0]' [ 2.078111] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@481d8000[0]' [ 2.087638] omap_hsmmc 481d8000.mmc: using lookup tables for GPIO lookup [ 2.094676] omap_hsmmc 481d8000.mmc: lookup for GPIO wp failed [ 2.137856] ledtrig-cpu: registered to indicate activity on CPUs [ 2.146576] oprofile: using arm/armv7 [ 2.151680] Initializing XFRM netlink socket [ 2.156751] NET: Registered protocol family 10 [ 2.167456] sit: IPv6 over IPv4 tunneling driver [ 2.176213] NET: Registered protocol family 17 [ 2.181146] NET: Registered protocol family 15 [ 2.186393] Key type dns_resolver registered [ 2.191323] omap_voltage_late_init: Voltage driver support not added [ 2.198085] sr_dev_init: No voltage domain specified for smartreflex0. Cannot initialize [ 2.206577] sr_dev_init: No voltage domain specified for smartreflex1. Cannot initialize [ 2.216846] ThumbEE CPU extension supported. [ 2.221498] Registering SWP/SWPB emulation handler [ 2.226530] SmartReflex Class3 initialized [ 2.295536] tps65217 0-0024: TPS65217 ID 0xe version 1.2 [ 2.302823] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz [ 2.313351] mmc1: new high speed MMC card at address 0001 [ 2.325406] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 100 kHz [ 2.333678] mmcblk1: mmc1:0001 MMC02G 1.79 GiB [ 2.341491] hctosys: unable to open rtc device (rtc0) [ 2.346813] sr_init: No PMIC hook to init smartreflex [ 2.352600] sr_init: platform driver register failed for SR [ 2.392528] mmcblk1boot0: mmc1:0001 MMC02G partition 1 1.00 MiB [ 2.400480] mmcblk1boot1: mmc1:0001 MMC02G partition 2 1.00 MiB [ 2.414715] mmcblk1: p1 p2 [ 2.431924] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [bbb 01:52]: Timed out waiting for "<type 'str'>":

[PYBOOT] [bbb 01:53]: got exception: timeout ~$off

[PYBOOT] [bbb 01:54]: Done. Board beagleboard-x15-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 1.717304] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.724390] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750636] rtc-ds1307 2-006f: SET TIME! [ 1.756397] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.763153] rtc-ds1307 2-006f: 64 bytes nvram [ 1.767767] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.775970] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.781758] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.790008] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.799175] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.806046] hub 1-0:1.0: USB hub found [ 1.810003] hub 1-0:1.0: 1 port detected [ 1.814404] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.820188] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.828294] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.837313] hub 2-0:1.0: USB hub found [ 1.841285] hub 2-0:1.0: 1 port detected [ 1.847291] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.881253] vdd_3v3: supplied by regen1 [ 1.917821] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.935248] aic_dvdd_fixed: disabling [ 1.939843] Waiting for root device /dev/mmcblk0p1... [ 1.972169] mmc1: new high speed MMC card at address 0001 [ 1.978141] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.983032] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.989367] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.996241] mmcblk1: p1 [ 2.120130] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.155155] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.180409] hub 2-1:1.0: USB hub found [ 2.184384] hub 2-1:1.0: 4 ports detected [ 2.276432] hub 1-1:1.0: USB hub found [ 2.280419] hub 1-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 01:45]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:46]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:47]: Done. Board beagleboard-x15-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.717550] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.724636] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.750729] rtc-ds1307 2-006f: SET TIME! [ 1.756497] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.763245] rtc-ds1307 2-006f: 64 bytes nvram [ 1.767856] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.776046] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.781823] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.790073] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.799237] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.806126] hub 1-0:1.0: USB hub found [ 1.810084] hub 1-0:1.0: 1 port detected [ 1.814469] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.820236] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.828333] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.837338] hub 2-0:1.0: USB hub found [ 1.841300] hub 2-0:1.0: 1 port detected [ 1.847302] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.881347] vdd_3v3: supplied by regen1 [ 1.920660] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.938489] aic_dvdd_fixed: disabling [ 1.943277] Waiting for root device /dev/mmcblk0p1... [ 1.987266] mmc1: new high speed MMC card at address 0001 [ 1.993256] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.998155] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.004506] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.011534] mmcblk1: p1 [ 2.120228] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.155292] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.180446] hub 2-1:1.0: USB hub found [ 2.184424] hub 2-1:1.0: 4 ports detected [ 2.276468] hub 1-1:1.0: USB hub found [ 2.280455] hub 1-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 01:45]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:46]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:47]: Done. Board beagleboard-x15-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.590729] at24 0-0050: 4096 byte 24c32 EEPROM, writable, 1 bytes/write [ 1.597781] omap_i2c 48070000.i2c: bus 0 rev0.12 at 400 kHz [ 1.623080] rtc-ds1307 2-006f: SET TIME! [ 1.628706] rtc-ds1307 2-006f: rtc core: registered mcp7941x as rtc0 [ 1.635414] rtc-ds1307 2-006f: 64 bytes nvram [ 1.640004] omap_i2c 48060000.i2c: bus 2 rev0.12 at 400 kHz [ 1.647394] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.653174] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 1.661389] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x00010010 [ 1.670541] xhci-hcd xhci-hcd.0.auto: irq 400, io mem 0x48890000 [ 1.677270] hub 1-0:1.0: USB hub found [ 1.681227] hub 1-0:1.0: 1 port detected [ 1.685544] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 1.691310] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2 [ 1.699392] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 1.708258] hub 2-0:1.0: USB hub found [ 1.712199] hub 2-0:1.0: 1 port detected [ 1.717448] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 1.753310] vdd_3v3: supplied by regen1 [ 1.784386] rtc-ds1307 2-006f: setting system clock to 2001-01-01 00:00:00 UTC (978307200) [ 1.797299] aic_dvdd_fixed: disabling [ 1.802672] Waiting for root device /dev/mmcblk0p1... [ 1.849615] mmc1: new high speed MMC card at address 0001 [ 1.855484] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 1.860313] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 1.866607] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 1.873386] mmcblk1: p1 [ 1.992615] usb 1-1: new high-speed USB device number 2 using xhci-hcd [ 2.022636] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 2.051492] hub 2-1:1.0: USB hub found [ 2.055469] hub 2-1:1.0: 4 ports detected [ 2.147495] hub 1-1:1.0: USB hub found [ 2.151460] hub 1-1:1.0: 4 ports detected

[PYBOOT] [beagleboard-x15 02:03]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 02:04]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 02:05]: Done. Board beagleboard-x15-arm-omap2plus_defconfig failure log: -------------------------------------------------

[ 2.174424] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.181293] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/ocp/mmc@4809c000[0]' - status (0) [ 2.191693] omap_hsmmc 4809c000.mmc: Got CD GPIO [ 2.196557] omap_hsmmc 4809c000.mmc: GPIO lookup for consumer wp [ 2.202872] omap_hsmmc 4809c000.mmc: using device tree for GPIO lookup [ 2.209721] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@4809c000[0]' [ 2.219311] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@4809c000[0]' [ 2.228809] omap_hsmmc 4809c000.mmc: using lookup tables for GPIO lookup [ 2.235862] omap_hsmmc 4809c000.mmc: lookup for GPIO wp failed [ 2.283768] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer cd [ 2.290070] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.296944] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.306538] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.316036] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.323075] omap_hsmmc 480b4000.mmc: lookup for GPIO cd failed [ 2.329195] omap_hsmmc 480b4000.mmc: GPIO lookup for consumer wp [ 2.335499] omap_hsmmc 480b4000.mmc: using device tree for GPIO lookup [ 2.342351] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/ocp/mmc@480b4000[0]' [ 2.351935] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/ocp/mmc@480b4000[0]' [ 2.361442] omap_hsmmc 480b4000.mmc: using lookup tables for GPIO lookup [ 2.368480] omap_hsmmc 480b4000.mmc: lookup for GPIO wp failed [ 2.375176] vdd_3v3: supplied by regen1 [ 2.413843] hctosys: unable to open rtc device (rtc0) [ 2.419143] sr_init: No PMIC hook to init smartreflex [ 2.424654] sr_init: platform driver register failed for SR [ 2.471637] aic_dvdd_fixed: disabling [ 2.475897] ldousb: disabling [ 2.483825] Waiting for root device /dev/mmcblk0p1... [ 2.535441] mmc1: new high speed MMC card at address 0001 [ 2.543195] mmcblk1: mmc1:0001 S10004 3.56 GiB [ 2.548457] mmcblk1boot0: mmc1:0001 S10004 partition 1 4.00 MiB [ 2.555259] mmcblk1boot1: mmc1:0001 S10004 partition 2 4.00 MiB [ 2.563785] mmcblk1: p1

[PYBOOT] [beagleboard-x15 01:41]: Timed out waiting for "<type 'str'>":

[PYBOOT] [beagleboard-x15 01:42]: got exception: timeout ~$off

[PYBOOT] [beagleboard-x15 01:43]: Done. Board colombus-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 41.980841] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended [ 41.995166] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 85.318251] random: dd urandom read with 58 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

[ 89.721607] eth0: device MAC address da:18:29:a2:c1:d4 [ 89.876744] RX IPC Checksum Offload disabled [ 89.881358] No MAC Management Counters available [ 89.887121] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready Listening on LPF/eth0/da:18:29:a2:c1:d4 Sending on LPF/eth0/da:18:29:a2:c1:d4 Sending on Socket/fallback DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPREQUEST on eth0 to 255.255.255.255 port 67 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11

[PYBOOT] [colombus 03:17]: Timed out waiting for "<type 'str'>":

[PYBOOT] [colombus 03:18]: got exception: timeout ~$off

[PYBOOT] [colombus 03:19]: Done. Board cosmic-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

[ 14.456665] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.530907] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.541229] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.615417] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.625734] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.699961] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.710282] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.784462] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.794783] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.869019] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.879349] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.953529] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.963883] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 43.038247] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 43.048706] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 47.122998] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 47.133320] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 51.207557] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 51.217875] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 55.292106] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 55.302426] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 59.376661] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.386981] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.461215] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.471535] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.545711] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.556028] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.630252] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.640574] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.714755] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.725075] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.799305] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.809628] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 01:59]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:00]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:01]: Done. Board cosmic-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 14.082601] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 18.156586] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 18.166661] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.240645] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.250721] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.324700] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.334779] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.408762] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.418841] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.492833] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.502933] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.576930] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.586999] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.660990] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.671059] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.745048] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.755120] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.829108] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.839179] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.913167] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.923239] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.997229] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 59.007299] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 63.081285] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 63.091358] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 67.165342] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 67.175419] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.249399] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.259495] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.333480] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.343556] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.417545] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.427625] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 02:07]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:08]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:09]: Done. Board cosmic-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 13.873150] blk_update_request: I/O error, dev mmcblk0, sector 3633185 [ 17.947064] mmcblk0: error -110 transferring data, sector 3633186, nr 230, cmd response 0x900, card status 0x0 [ 17.957115] blk_update_request: I/O error, dev mmcblk0, sector 3633186 [ 22.031027] mmcblk0: error -110 transferring data, sector 3633187, nr 229, cmd response 0x900, card status 0x0 [ 22.041079] blk_update_request: I/O error, dev mmcblk0, sector 3633187 [ 26.114992] mmcblk0: error -110 transferring data, sector 3633188, nr 228, cmd response 0x900, card status 0x0 [ 26.125053] blk_update_request: I/O error, dev mmcblk0, sector 3633188 [ 30.198966] mmcblk0: error -110 transferring data, sector 3633189, nr 227, cmd response 0x900, card status 0x0 [ 30.209026] blk_update_request: I/O error, dev mmcblk0, sector 3633189 [ 34.282939] mmcblk0: error -110 transferring data, sector 3633190, nr 226, cmd response 0x900, card status 0x0 [ 34.293000] blk_update_request: I/O error, dev mmcblk0, sector 3633190 [ 38.366912] mmcblk0: error -110 transferring data, sector 3633191, nr 225, cmd response 0x900, card status 0x0 [ 38.376973] blk_update_request: I/O error, dev mmcblk0, sector 3633191 [ 42.450899] mmcblk0: error -110 transferring data, sector 3633192, nr 224, cmd response 0x900, card status 0x0 [ 42.460963] blk_update_request: I/O error, dev mmcblk0, sector 3633192 [ 46.534874] mmcblk0: error -110 transferring data, sector 3633193, nr 223, cmd response 0x900, card status 0x0 [ 46.544922] blk_update_request: I/O error, dev mmcblk0, sector 3633193 [ 50.618832] mmcblk0: error -110 transferring data, sector 3633194, nr 222, cmd response 0x900, card status 0x0 [ 50.628878] blk_update_request: I/O error, dev mmcblk0, sector 3633194 [ 54.702784] mmcblk0: error -110 transferring data, sector 3633195, nr 221, cmd response 0x900, card status 0x0 [ 54.712844] blk_update_request: I/O error, dev mmcblk0, sector 3633195 [ 58.786764] mmcblk0: error -110 transferring data, sector 3633196, nr 220, cmd response 0x900, card status 0x0 [ 58.796815] blk_update_request: I/O error, dev mmcblk0, sector 3633196 [ 62.870728] mmcblk0: error -110 transferring data, sector 3633197, nr 219, cmd response 0x900, card status 0x0 [ 62.880780] blk_update_request: I/O error, dev mmcblk0, sector 3633197 [ 66.954694] mmcblk0: error -110 transferring data, sector 3633198, nr 218, cmd response 0x900, card status 0x0 [ 66.964745] blk_update_request: I/O error, dev mmcblk0, sector 3633198 [ 71.038659] mmcblk0: error -110 transferring data, sector 3633199, nr 217, cmd response 0x900, card status 0x0 [ 71.048719] blk_update_request: I/O error, dev mmcblk0, sector 3633199 [ 75.122635] mmcblk0: error -110 transferring data, sector 3633200, nr 216, cmd response 0x900, card status 0x0 [ 75.132691] blk_update_request: I/O error, dev mmcblk0, sector 3633200 [ 79.206600] mmcblk0: error -110 transferring data, sector 3633201, nr 215, cmd response 0x900, card status 0x0 [ 79.216657] blk_update_request: I/O error, dev mmcblk0, sector 3633201

[PYBOOT] [cosmic 02:15]: Timed out waiting for "<type 'str'>":

[PYBOOT] [cosmic 02:16]: got exception: timeout ~$off

[PYBOOT] [cosmic 02:17]: Done. Board dalmore-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.486697] Key type dns_resolver registered [ 2.493105] ThumbEE CPU extension supported. [ 2.497530] Registering SWP/SWPB emulation handler [ 2.526416] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.534651] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.544499] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.561066] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.567823] [drm] No driver support for vblank timestamp query. [ 2.587139] mmc1: new high speed MMC card at address 0001 [ 2.597106] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.605257] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.614013] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.622683] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.633504] mmcblk1: p1 [ 2.744944] Console: switching to colour frame buffer device 240x75 [ 2.832229] drm drm: fb0: frame buffer device [ 2.849033] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.859152] usb2_vbus: supplied by vdd-sys-5v0 [ 2.870776] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.876365] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.885127] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.899067] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.909495] hub 1-0:1.0: USB hub found [ 2.913491] hub 1-0:1.0: 1 port detected [ 2.923576] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.937273] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.000485] dvdd_ts: disabling [ 3.003587] usb1_vbus: disabling [ 3.006953] vdd_cam_1v8_reg: disabling [ 3.014538] Waiting for root device /dev/mmcblk0p1... [ 3.224071] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.201602] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 49.849030] random: nonblocking pool is initialized

[PYBOOT] [dalmore 02:12]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 02:13]: got exception: timeout ~$off

[PYBOOT] [dalmore 02:14]: Done. Board dalmore-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.486699] Key type dns_resolver registered [ 2.493120] ThumbEE CPU extension supported. [ 2.497540] Registering SWP/SWPB emulation handler [ 2.525364] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.532588] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.542223] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.557311] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.564088] [drm] No driver support for vblank timestamp query. [ 2.583163] mmc1: new high speed MMC card at address 0001 [ 2.590950] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.598001] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.607777] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.617564] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.628318] mmcblk1: p1 [ 2.743555] Console: switching to colour frame buffer device 240x75 [ 2.830986] drm drm: fb0: frame buffer device [ 2.849096] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.859216] usb2_vbus: supplied by vdd-sys-5v0 [ 2.870910] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.876503] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.885329] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.899106] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.909335] hub 1-0:1.0: USB hub found [ 2.913327] hub 1-0:1.0: 1 port detected [ 2.923900] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.938221] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 3.000583] dvdd_ts: disabling [ 3.003684] usb1_vbus: disabling [ 3.007055] vdd_cam_1v8_reg: disabling [ 3.014800] Waiting for root device /dev/mmcblk0p1... [ 3.229111] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.206491] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 65.408009] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:58]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:59]: got exception: timeout ~$off

[PYBOOT] [dalmore 02:00]: Done. Board dalmore-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 2.031518] can: broadcast manager protocol (rev 20120528 t) [ 2.037274] can: netlink gateway (rev 20130117) max_hops=1 [ 2.043915] Key type dns_resolver registered [ 2.049023] ThumbEE CPU extension supported. [ 2.080759] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.085691] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.095779] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.115994] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.122672] [drm] No driver support for vblank timestamp query. [ 2.286290] Console: switching to colour frame buffer device 240x75 [ 2.372176] drm drm: fb0: frame buffer device [ 2.376789] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 2.384834] usb2_vbus: supplied by vdd-sys-5v0 [ 2.389862] mmc1: new high speed MMC card at address 0001 [ 2.398710] tegra-ehci 7d008000.usb: EHCI Host Controller [ 2.404265] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 2.412368] mmcblk1: mmc1:0001 SEM32G 29.1 GiB [ 2.417394] mmcblk1boot0: mmc1:0001 SEM32G partition 1 4.00 MiB [ 2.424106] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 2.430188] mmcblk1boot1: mmc1:0001 SEM32G partition 2 4.00 MiB [ 2.436568] mmcblk1rpmb: mmc1:0001 SEM32G partition 3 4.00 MiB [ 2.443336] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 2.450514] mmcblk1: p1 [ 2.455379] hub 1-0:1.0: USB hub found [ 2.463668] hub 1-0:1.0: 1 port detected [ 2.471766] input: gpio-keys as /devices/soc0/gpio-keys/input/input0 [ 2.483077] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.524209] dvdd_ts: disabling [ 2.527361] usb1_vbus: disabling [ 2.530639] vdd_cam_1v8_reg: disabling [ 2.536068] Waiting for root device /dev/mmcblk0p1... [ 2.774866] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 3.727951] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f

[PYBOOT] [dalmore 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:52]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:53]: Done. Board dalmore-arm-tegra_defconfig failure log: -------------------------------------------------

[ 2.635890] Bluetooth: RFCOMM ver 1.11 [ 2.639877] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.645274] Bluetooth: BNEP socket layer initialized [ 2.650376] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.656374] Bluetooth: HIDP socket layer initialized [ 2.663327] Key type dns_resolver registered [ 2.672929] Registering SWP/SWPB emulation handler [ 2.704180] vdd-sys-5v0: supplied by vdd_ac_bat [ 2.711545] VDD_5V0_HDMI_CON: supplied by vdd-sys-5v0 [ 2.721646] vdd_hdmi_5v0: supplied by vdd-sys-5v0 [ 2.746003] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.752804] [drm] No driver support for vblank timestamp query. [ 2.931934] Console: switching to colour frame buffer device 240x75 [ 3.019195] drm drm: fb0: frame buffer device [ 3.048764] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.055990] usb2_vbus: supplied by vdd-sys-5v0 [ 3.065368] tegra-ehci 7d008000.usb: EHCI Host Controller [ 3.071171] tegra-ehci 7d008000.usb: new USB bus registered, assigned bus number 1 [ 3.080325] tegra-ehci 7d008000.usb: irq 339, io mem 0x7d008000 [ 3.098953] tegra-ehci 7d008000.usb: USB 2.0 started, EHCI 1.10 [ 3.113039] hub 1-0:1.0: USB hub found [ 3.117010] hub 1-0:1.0: 1 port detected [ 3.130854] input: gpio-keys as /devices/soc0/gpio-keys/input/input1 [ 3.146199] palmas-rtc 7000d000.i2c:tps65913@58:rtc: setting system clock to 2000-01-01 00:00:01 UTC (946684801) [ 3.241136] dvdd_ts: disabling [ 3.244240] usb1_vbus: disabling [ 3.247502] vdd_cam_1v8_reg: disabling [ 3.252309] ALSA device list: [ 3.255309] #0: NVIDIA Tegra Dalmore [ 3.261283] Waiting for root device /dev/mmcblk0p1... [ 3.438758] usb 1-1: new high-speed USB device number 2 using tegra-ehci [ 4.473292] asix 1-1:1.0 eth0: register 'asix' at usb-7d008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, 48:f8:b3:2b:29:1f [ 46.948729] random: nonblocking pool is initialized

[PYBOOT] [dalmore 01:45]: Timed out waiting for "<type 'str'>":

[PYBOOT] [dalmore 01:46]: got exception: timeout ~$off

[PYBOOT] [dalmore 01:48]: Done. Board odroidu3-arm-exynos_defconfig failure log: -------------------------------------------------

[ 1.688841] usbhid: USB HID core driver [ 1.697500] NET: Registered protocol family 10 [ 1.698120] sit: IPv6 over IPv4 tunneling driver [ 1.701327] NET: Registered protocol family 17 [ 1.705363] NET: Registered protocol family 15 [ 1.709812] Key type dns_resolver registered [ 1.714139] Registering SWP/SWPB emulation handler [ 1.719976] s3c-rtc 10070000.rtc: rtc disabled, re-enabling [ 1.724391] s3c-rtc 10070000.rtc: warning: invalid RTC value so initializing it [ 1.731777] s3c-rtc 10070000.rtc: rtc core: registered s3c as rtc1 [ 1.751237] mmc_host mmc1: Bus speed (slot 0) = 44000000Hz (slot req 52000000Hz, actual 44000000HZ div = 0) [ 1.755490] mmc_host mmc1: Bus speed (slot 0) = 73333333Hz (slot req 52000000Hz, actual 36666666HZ div = 1) [ 1.762938] max98090 1-0010: MAX98090 REVID=0x43 [ 1.765173] max98090 1-0010: use default 2.8v micbias [ 1.775118] mmc1: new DDR MMC card at address 0001 [ 1.777771] usb 1-3: New USB device found, idVendor=0424, idProduct=3503 [ 1.777779] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.778433] hub 1-3:1.0: USB hub found [ 1.778497] hub 1-3:1.0: 3 ports detected [ 1.790030] asoc-simple-card sound: HiFi <-> 3830000.i2s mapping ok [ 1.793035] input: gpio_keys as /devices/platform/gpio_keys/input/input0 [ 1.814354] mmcblk1: mmc1:0001 008G92 7.28 GiB [ 1.818606] mmcblk1boot0: mmc1:0001 008G92 partition 1 4.00 MiB [ 1.824523] mmcblk1boot1: mmc1:0001 008G92 partition 2 4.00 MiB [ 1.830409] mmcblk1rpmb: mmc1:0001 008G92 partition 3 512 KiB [ 1.836948] mmcblk1: p1 p2 [ 1.839945] max77686-rtc max77686-rtc: setting system clock to 2000-01-01 01:00:19 UTC (946688419) [ 1.863553] VDD10_HDMI_1.0V: disabling [ 1.864250] vdd_g3d: disabling [ 1.865329] BUCK8_2.8V: disabling [ 1.86q350] ALSA device list: [ 1.870945] #0: Odroid-U3 [ 1.874638] Waiting for root device /dev/mmcblk0p2...

[PYBOOT] [odroidu3 01:50]: Timed out waiting for "<type 'str'>":

[PYBOOT] [odroidu3 01:51]: got exception: timeout ~$off

[PYBOOT] [odroidu3 01:52]: Done. Board omap5uevm-arm-multi_lpae_defconfig failure log: -------------------------------------------------

[ 2.165874] Stack: (0xee05bdd8 to 0xee05c000) [ 2.170430] bdc0: ffff0a00 20000013 [ 2.178982] bde0: 000007d2 ee6600be 00000000 00000000 ee6e6eb0 ee660000 c1444b98 c133f9b4 [ 2.187540] be00: ee042640 ee660000 00000000 c0f69594 c0f78f48 c058e8c8 c0f69594 ee05be30 [ 2.196090] be20: ee6e700c ee6e700c c058ebb0 c0f048dc 00000806 00000000 ee03b410 c046e134 [ 2.204651] be40: ee6e700c ee6e700c ee03b410 ee6e54c0 00000000 c03636bc c1444b98 ee6e700c [ 2.213210] be60: ee6e700c c058e20c ee6e700c 00000000 ee6e700c 00000000 c11af84c 00000000 [ 2.221768] be80: 00000118 00000008 00000000 c058e4d8 ee6e7000 c13b1488 00000000 c077baf0 [ 2.230326] bea0: c1452b98 c1306890 ee6e54c0 c11af84c 00000000 c113ee0c ee05beb8 ee05beb8 [ 2.238890] bec0: 00000118 ee05bef8 c144fcf4 c1410000 c1410000 c1203224 c113edc4 c1306890 [ 2.247447] bee0: c1306890 ee6e54c0 c113edc4 00000000 00000118 00000008 00000000 c0301e7c [ 2.255999] bf00: 00000000 cccccccd 00000000 c0464d8c c0c0b400 ee132880 00000000 c133659c [ 2.264555] bf20: c101e86c c0c1ceac 00000118 c035b858 c0eca318 c101d28c 00000000 00000007 [ 2.273118] bf40: 00000007 c0ee0968 c1336584 c1410000 c1410000 c1410000 c1410000 c1203224 [ 2.281687] bf60: c11a3838 c11a383c 00000118 c1100db0 00000007 00000007 00000000 c11005ac [ 2.290248] bf80: 00000000 00000000 c0b4fc6c 00000000 00000000 00000000 00000000 00000000 [ 2.298804] bfa0: 00000000 c0b4fc74 00000000 c0307d38 00000000 00000000 00000000 00000000 [ 2.307370] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 2.315931] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 4999c0cd e9d99ae8 [ 2.324504] [<c059649c>] (vsnprintf) from [<c058e8c8>] (add_uevent_var+0x3c/0xc8) [ 2.332337] [<c058e8c8>] (add_uevent_var) from [<c058ebb0>] (kobject_uevent_env+0x25c/0x508) [ 2.341167] [<c058ebb0>] (kobject_uevent_env) from [<c058e4d8>] (kset_register+0x60/0x70) [ 2.349731] [<c058e4d8>] (kset_register) from [<c077baf0>] (__class_register+0xcc/0x1c0) [ 2.358198] [<c077baf0>] (__class_register) from [<c113ee0c>] (ubi_init+0x48/0x260) [ 2.366215] [<c113ee0c>] (ubi_init) from [<c0301e7c>] (do_one_initcall+0x90/0x1d4) [ 2.374137] [<c0301e7c>] (do_one_initcall) from [<c1100db0>] (kernel_init_freeable+0x158/0x1e8) [ 2.383247] [<c1100db0>] (kernel_init_freeable) from [<c0b4fc74>] (kernel_init+0x8/0x114) [ 2.391812] [<c0b4fc74>] (kernel_init) from [<c0307d38>] (ret_from_fork+0x14/0x3c) [ 2.399737] Code: e1a00004 a1a02009 ebffd021 e0844009 (e5d83000) [ 2.406163] ---[ end trace 8ce9daf80faccafd ]--- [ 2.411020] Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 2.411020] [ 3.397530] SMP: failed to stop secondary CPUs [ 3.402177] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b [ 3.402177]

[PYBOOT] [omap5uevm 00:50]: got exception: panic ~$off

[PYBOOT] [omap5uevm 00:51]: Done. Board omap5uevm-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 2.118698] pc : [<c0589a48>] lr : [<c058b700>] psr: 60000193 [ 2.118698] sp : c1301d70 ip : 00000000 fp : eefd92c0 [ 2.130730] r10: c1301e10 r9 : c13024e0 r8 : 00000000 [ 2.136195] r7 : c1302574 r6 : c1302574 r5 : eefc93a4 r4 : ee042110 [ 2.143026] r3 : 00000009 r2 : 00000000 r1 : 00000010 r0 : ffffffff [ 2.149853] Flags: nZCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 2.157398] Control: 10c5387d Table: 8020406a DAC: 00000051 [ 2.163410] Process swapper/0 (pid: 0, stack limit = 0xc1300220) [ 2.169692] Stack: (0xc1301d70 to 0xc1302000) [ 2.174249] 1d60: c1301dd4 00000000 ee2b7128 c0368d84 [ 2.182809] 1d80: ee2b6fd4 eefd92c0 eefd97b8 ee2b6f40 00000000 c037054c 01535a04 20000113 [ 2.191375] 1da0: 00063246 00000000 c12082c0 c1302684 c12082c0 ee041500 c1302574 00000000 [ 2.199938] 1dc0: c12082c0 00000000 00000000 eefc93a4 eefcd2c0 ee041500 eefd92c0 00000001 [ 2.208506] 1de0: 00000000 eefcd2c0 ee042110 00000000 00000000 00000174 eefc93a4 00000009 [ 2.217073] 1e00: 00000002 00000020 00000002 00000002 c1301e10 c1301e10 00000100 ee041500 [ 2.225633] 1e20: 00000001 c1302100 c13024f0 00003244 00000000 00003244 00000000 c0371a68 [ 2.234184] 1e40: c1301e9c eefcd2c0 00000000 00000000 eefc9cb8 00000000 00000000 ffffe000 [ 2.242742] 1e60: ffff461c 00000000 00000000 eefcd2c0 c1413940 00000000 eefc9400 c0393880 [ 2.251301] 1e80: eefc9cb8 c03a4118 00000000 eefcd300 00000000 c0393a88 00000000 00000001 [ 2.259857] 1ea0: eefc9cf8 00000000 00000007 c1300000 c130209c c1302080 00000100 c1302088 [ 2.268416] 1ec0: 40000005 c0345240 00000000 eefcfec0 c1301ec8 c1412c40 0000000a ffff173d [ 2.276976] 1ee0: c1302100 00200000 c130250c ffffe000 00000000 00000000 00000001 ee008000 [ 2.285536] 1f00: fa213000 c140dee8 c130250c c034562c c12054cc c0383d18 c1302880 c1340078 [ 2.294096] 1f20: fa21200c c1301f50 fa212000 c0301798 c0308740 a0000013 ffffffff c1301f84 [ 2.302654] 1f40: c12075c0 c1302504 c140dee8 c030c494 00000001 00000000 ea000013 f0880000 [ 2.311213] 1f60: c1300000 c13024a4 00000000 00000000 c12075c0 c1302504 c140dee8 c130250c [ 2.319768] 1f80: 60000013 c1301fa0 c032aee0 c0308740 a0000013 ffffffff 00000051 c030873c [ 2.328327] 1fa0: c1300000 c03781e0 c1301fb4 c1301fa8 00000000 ffffffff 00000000 c1100c4c [ 2.336893] 1fc0: ffffffff ffffffff 00000000 c1100684 00000000 c11a3a30 c14105d4 c1302480 [ 2.345450] 1fe0: c11a3a2c c1307c4c 8020406a 412fc0f2 00000000 8020807c 00000000 00000000 [ 2.354016] Code: eafffff0 e3310000 0a000006 e3a02000 (e7d031a2) [ 2.360399] ---[ end trace 69f6ea12ac1d773a ]--- [ 2.365228] Kernel panic - not syncing: Fatal exception in interrupt [ 3.348835] SMP: failed to stop secondary CPUs [ 3.353485] ---[ end Kernel panic - not syncing: Fatal exception in interrupt

[PYBOOT] [omap5uevm 00:52]: got exception: panic ~$off

[PYBOOT] [omap5uevm 00:53]: Done. Board omap5uevm-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 25.702004] Exception stack(0xee4fd030 to 0xee4fd078) [ 25.707284] d020: 0000012c 00000005 ee4fc000 ffffe000 [ 25.715838] d040: ee4fd170 00000000 c031562c 00000005 0000012c c1036d80 00000000 00000001 [ 25.724400] d060: 00000193 ee4fd080 c030125c c0315240 00000193 ffffffff [ 25.731319] [<c030bc60>] (__dabt_svc) from [<c0315240>] (do_page_fault+0x30/0x384) [ 25.739254] [<c0315240>] (do_page_fault) from [<c030125c>] (do_DataAbort+0x3c/0xb8) [ 25.747270] [<c030125c>] (do_DataAbort) from [<c030bc60>] (__dabt_svc+0x40/0x60) [ 25.755012] Exception stack(0xee4fd170 to 0xee4fd1b8) [ 25.760297] d160: 0000012c 00000005 ee4fc000 ffffe000 [ 25.768855] d180: ee4fd2b0 00000000 c031562c 00000005 0000012c c1036d80 00000000 00000001 [ 25.777412] d1a0: 00000193 ee4fd1c0 c030125c c0315240 00000193 ffffffff [ 25.784340] [<c030bc60>] (__dabt_svc) from [<c0315240>] (do_page_fault+0x30/0x384) [ 25.792265] [<c0315240>] (do_page_fault) from [<c030125c>] (do_DataAbort+0x3c/0xb8) [ 25.800278] [<c030125c>] (do_DataAbort) from [<c030bc60>] (__dabt_svc+0x40/0x60) [ 25.808022] Exception stack(0xee4fd2b0 to 0xee4fd2f8) [ 25.813309] d2a0: 0000012c 00000005 ee4fc000 ffffe000 [ 25.821871] d2c0: ee4fd3f0 00000000 c031562c 00000005 0000012c c1036d80 00000000 00000001 [ 25.830432] d2e0: 00000193 ee4fd300 c030125c c0315240 00000193 ffffffff [ 25.837350] [<c030bc60>] (__dabt_svc) from [<c0315240>] (do_page_fault+0x30/0x384) [ 25.845268] [<c0315240>] (do_page_fault) from [<c030125c>] (do_DataAbort+0x3c/0xb8) [ 25.853279] [<c030125c>] (do_DataAbort) from [<c030bc60>] (__dabt_svc+0x40/0x60) [ 25.861020] Exception stack(0xee4fd3f0 to 0xee4fd438) [ 25.866303] d3e0: 0000012c 00000005 ee4fc000 ffffe000 [ 25.874867] d400: ee4fd530 00000000 c031562c 00000005 0000012c c1036d80 00000000 00000001 [ 25.883426] d420: 00000193 ee4fd440 c030125c c0315240 00000193 ffffffff [ 25.890352] [<c030bc60>] (__dabt_svc) from [<c0315240>] (do_page_fault+0x30/0x384) [ 25.898273] [<c0315240>] (do_page_fault) from [<c030125c>] (do_DataAbort+0x3c/0xb8) [ 25.906286] [<c030125c>] (do_DataAbort) from [<c030bc60>] (__dabt_svc+0x40/0x60) [ 25.914021] Exception stack(0xee4fd530 to 0xee4fd578) [ 25.919303] d520: 0000012c 00000005 ee4fc000 ffffe000 [ 25.927860] d540: ee4fd670 00000000 c031562c 00000005 0000012c c1036d80 00000000 00000001 [ 25.936426] d560: 00000193 ee4fd580 c030125c c0315240 00000193 ffffffff [ 25.943358] [<c030bc60>] (__dabt_svc) from [<c0315240>] (do_page_fault+0x30/0x384) [ 25.951286] [<c0315240>] (do_page_fault) from [<c030125c>] (do_DataAbort+0x3c/0xb8) [ 25.959298] [<c030125c>] (do_DataAbort) from [<c030bc60>] (__dabt_svc+0x40/0x60) [ 25.967043] Exception stack(0xee4fd670 [PYBOOT] [omap5uevm 01:10]: got exception: panic ~$off

[PYBOOT] [omap5uevm 01:12]: Done. Board seaboard-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.657012] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.667499] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.673979] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.679396] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.687854] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.699658] mmc2: switch to bus width 8 failed [ 1.704207] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.710844] mmc2: switch to bus width 4 failed [ 1.715354] mmc2: new high speed MMC card at address 0001 [ 1.715694] hub 3-0:1.0: USB hub found [ 1.715747] hub 3-0:1.0: 1 port detected [ 1.729119] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.735152] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.741795] [drm] No driver support for vblank timestamp query. [ 1.748044] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.754233] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.761646] mmcblk2: p3 [ 1.772925] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.786792] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.795196] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.802519] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.821656] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.826050] mmc0: new SDIO card at address 0001 [ 1.847522] Console: switching to colour frame buffer device 170x48 [ 1.891691] drm drm: fb0: frame buffer device [ 1.908564] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.915364] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.922431] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.936756] vdd_1v5: disabling [ 1.939840] vdd_1v2: disabling [ 2.566860] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.578323] Waiting for root device /dev/mmcblk0p3... [ 58.504796] random: nonblocking pool is initialized

[PYBOOT] [seaboard 01:51]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:52]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:54]: Done. Board seaboard-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.617670] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 1.623999] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 1.633899] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 1.640354] tegra-ehci c5000000.usb: EHCI Host Controller [ 1.645767] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 1.653523] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 1.669210] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 1.675820] hub 3-0:1.0: USB hub found [ 1.679640] hub 3-0:1.0: 1 port detected [ 1.684690] mmc2: switch to bus width 8 failed [ 1.703784] mmc2: switch to bus width 4 failed [ 1.708261] mmc2: new high speed MMC card at address 0001 [ 1.714039] mmcblk2: mmc2:0001 MMC08G 7.46 GiB [ 1.718821] mmcblk2boot0: mmc2:0001 MMC08G partition 1 512 KiB [ 1.724874] mmcblk2boot1: mmc2:0001 MMC08G partition 2 512 KiB [ 1.732154] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 1.738779] [drm] No driver support for vblank timestamp query. [ 1.746110] mmcblk2: p3 [ 1.773511] mmc0: queuing unknown CIS tuple 0x80 (50 bytes) [ 1.781119] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.784543] mmc0: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.791560] mmc0: queuing unknown CIS tuple 0x80 (19 bytes) [ 1.807394] Console: switching to colour frame buffer device 170x48 [ 1.849369] drm drm: fb0: frame buffer device [ 1.853854] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 1.860350] input: gpio-keys as /devices/soc0/gpio-keys/input/input2 [ 1.878018] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 1.889935] vdd_1v5: disabling [ 1.893005] vdd_1v2: disabling [ 1.909645] mmc0: queuing unknown CIS tuple 0x02 (1 bytes) [ 1.918334] mmc0: new SDIO card at address 0001 [ 2.587455] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 2.598332] Waiting for root device /dev/mmcblk0p3...

[PYBOOT] [seaboard 01:52]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:53]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:55]: Done. Board seaboard-arm-tegra_defconfig failure log: -------------------------------------------------

[ 2.649032] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 2.649064] Bluetooth: BNEP socket layer initialized [ 2.649077] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 2.649106] Bluetooth: HIDP socket layer initialized [ 2.649721] Key type dns_resolver registered [ 2.650947] Registering SWP/SWPB emulation handler [ 2.726605] tegra-dc 54200000.dc: failed to probe RGB output: -517 [ 2.727163] VDDIO_HDMI: supplied by vdd_5v0 [ 2.727435] vdd_sys: supplied by vdd_5v0 [ 2.727532] vdd_sm2,vin_ldo*: supplied by vdd_sys [ 2.747148] vdd_ldo8,avdd_hdmi_pll: supplied by vdd_sm2,vin_ldo* [ 2.762369] vdd_ldo7,avdd_hdmi,vdd_fuse: supplied by vdd_sm2,vin_ldo* [ 2.773273] utmi_phy_clk_enable: timeout waiting for phy to stabilize [ 2.785047] mmc0: new SDIO card at address 0001 [ 2.792062] tegra-ehci c5000000.usb: EHCI Host Controller [ 2.797515] tegra-ehci c5000000.usb: new USB bus registered, assigned bus number 3 [ 2.805540] tegra-ehci c5000000.usb: irq 287, io mem 0xc5000000 [ 2.825287] tegra-ehci c5000000.usb: USB 2.0 started, EHCI 1.00 [ 2.833499] hub 3-0:1.0: USB hub found [ 2.837375] hub 3-0:1.0: 1 port detected [ 2.848510] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.855110] [drm] No driver support for vblank timestamp query. [ 2.973315] Console: switching to colour frame buffer device 170x48 [ 2.992230] drm drm: fb0: frame buffer device [ 3.045290] [drm] Initialized tegra 0.0.0 20120330 on minor 0 [ 3.052491] input: gpio-keys as /devices/soc0/gpio-keys/input/input4 [ 3.060199] tps6586x-rtc tps6586x-rtc: setting system clock to 2009-01-01 00:00:00 UTC (1230768000) [ 3.079585] vdd_1v5: disabling [ 3.082637] vdd_1v2: disabling [ 3.086335] ALSA device list: [ 3.089296] #0: NVIDIA Tegra Seaboard [ 3.321556] asix 2-1:1.0 eth0: register 'asix' at usb-c5008000.usb-1, ASIX AX88772 USB 2.0 Ethernet, c0:c1:c0:13:08:60 [ 3.332583] Waiting for root device /dev/mmcblk0p3...

[PYBOOT] [seaboard 01:50]: Timed out waiting for "<type 'str'>":

[PYBOOT] [seaboard 01:51]: got exception: timeout ~$off

[PYBOOT] [seaboard 01:52]: Done. Board snow-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[....] Waiting for /dev to be fully populated...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 3.182637] EXT4-fs (mmcblk0p3): warning: mounting fs with errors, running e2fsck is recommended [ 3.190993] EXT4-fs (mmcblk0p3): re-mounted. Opts: (null) [....] Cleaning up temporary files... /tmp[?25l[?1c7[ ok 8[?25h[?0c. [....] Activating lvm and md swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Checking file systems...fsck from util-linux 2.20.1 [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Mounting local filesystems...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Activating swapfile swap...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. [....] Setting kernel variables ...[?25l[?1c7[ ok 8[?25h[?0cdone. [ 4.226753] random: dd urandom read with 59 bits of entropy available [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.2.2 Copyright 2004-2011 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/

Cannot find device "eth0" Bind socket to interface: No such device Failed to bring up eth0. [?25l[?1c7[ ok 8[?25h[?0cdone. [....] Cleaning up temporary files...[?25l[?1c7[ ok 8[?25h[?0c. INIT: Entering runlevel: 2 [info] Using makefile-style concurrent boot in runlevel 2. [....] Starting enhanced syslogd: rsyslogd[?25l[?1c7[ ok 8[?25h[?0c. [....] Starting web server: apache2apache2: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1 for ServerName [?25l[?1c7[ ok 8[?25h[?0c. [....] Starting periodic command scheduler: cron[?25l[?1c7[ ok 8[?25h[?0c. [....] Loading cpufreq kernel modules...[?25l[?1c7[ ok 8[?25h[?0cdone (none). [....] Starting system message bus: dbus[?25l[?1c7[ ok 8[?25h[?0c. [....] CPUFreq Utilities: Setting ondemand CPUFreq governor...CPU0...[?25l[?1c7[ ok 8[?25h[?0cdone. [....] Starting OpenBSD Secure Shell server: sshd[?25l[?1c7[ ok 8[?25h[?0c.

[PYBOOT] [snow 03:10]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snow 03:11]: got exception: timeout ~$off

[PYBOOT] [snow 03:12]: Done. Board snowball-arm-multi_v7_defconfig failure log: -------------------------------------------------

[ 1.954040] can: controller area network core (rev 20120528 abi 9) [ 1.960296] NET: Registered protocol family 29 [ 1.964752] can: raw protocol (rev 20120528) [ 1.969055] can: broadcast manager protocol (rev 20120528 t) [ 1.974731] can: netlink gateway (rev 20130117) max_hops=1 [ 1.980773] Key type dns_resolver registered [ 1.985290] ThumbEE CPU extension supported. [ 1.989593] Registering SWP/SWPB emulation handler [ 2.000427] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.007293] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.016540] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.023559] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.030548] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.037536] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.051483] db8500-esram12: disabling [ 2.055236] db8500-esram34: disabling [ 2.059295] V-CSI/DSI: disabling [ 2.062561] mmci-reg: disabling [ 2.066314] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.072296] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.078735] Waiting for root device /dev/mmcblk0p4... [ 2.118591] mmc3: new high speed MMC card at address 0001 [ 2.124572] mmcblk3: mmc3:0001 3.53 GiB [ 2.128814] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 2.134460] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 2.140106] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 2.146606] mmcblk3: p1 p2 p3 p4 cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.

Disconnected.

[PYBOOT] [snowball 02:02]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:03]: got exception: timeout ~$off

[PYBOOT] [snowball 02:04]: Done. Board snowball-arm-multi_v7_nosmp_defconfig failure log: -------------------------------------------------

[ 1.897888] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.905395] ledtrig-cpu: registered to indicate activity on CPUs [ 1.911621] usbcore: registered new interface driver usbhid [ 1.917205] usbhid: USB HID core driver [ 1.924438] NET: Registered protocol family 10 [ 1.979766] sit: IPv6 over IPv4 tunneling driver [ 1.984924] NET: Registered protocol family 17 [ 1.989410] can: controller area network core (rev 20120528 abi 9) [ 1.995635] NET: Registered protocol family 29 [ 2.000091] can: raw protocol (rev 20120528) [ 2.004364] can: broadcast manager protocol (rev 20120528 t) [ 2.010009] can: netlink gateway (rev 20130117) max_hops=1 [ 2.015930] Key type dns_resolver registered [ 2.020385] ThumbEE CPU extension supported. [ 2.074737] input: gpio_keys as /devices/soc0/gpio_keys/input/input0 [ 2.089416] rtc-pl031 80154000.rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800) [ 2.098510] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.105499] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.112487] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.119445] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.131134] db8500-esram12: disabling [ 2.178924] db8500-esram34: disabling [ 2.199676] V-CSI/DSI: disabling [ 2.208892] mmci-reg: disabling [ 2.212493] uart-pl011 80007000.uart: DMA channel TX dma0chan20 [ 2.218444] uart-pl011 80007000.uart: DMA channel RX dma0chan21 [ 2.239624] Waiting for root device /dev/mmcblk0p4... [ 3.042755] mmc3: new high speed MMC card at address 0001 [ 3.054565] mmcblk3: mmc3:0001 3.53 GiB [ 3.063720] mmcblk3boot0: mmc3:0001 partition 1 2.00 MiB [ 3.074218] mmcblk3boot1: mmc3:0001 partition 2 2.00 MiB [ 3.088745] mmcblk3rpmb: mmc3:0001 partition 3 128 KiB [ 3.095550] mmcblk3: p1 p2 p3 p4

[PYBOOT] [snowball 01:59]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 02:00]: got exception: timeout ~$off

[PYBOOT] [snowball 02:01]: Done. Board snowball-arm-u8500_defconfig failure log: -------------------------------------------------

[ 2.752807] ux500-msp-i2s ux500-msp-i2s.1: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.763824] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.0 <-> ux500-msp-i2s.1 mapping ok [ 2.780273] ux500-msp-i2s ux500-msp-i2s.3: Failed to get DMA channel capabilities, falling back to period counting: -6 [ 2.791351] snd-soc-mop500 snd-soc-mop500.0: ab8500-codec-dai.1 <-> ux500-msp-i2s.3 mapping ok [ 2.825164] NET: Registered protocol family 10 [ 2.833038] sit: IPv6 over IPv4 tunneling driver [ 2.839965] NET: Registered protocol family 17 [ 2.844909] NET: Registered protocol family 35 [ 2.849670] NET: Registered protocol family 37 [ 2.854644] Registering SWP/SWPB emulation handler [ 2.874786] coresight-etm3x 801ae000.ptm: PTM 1.0 initialized [ 2.887695] coresight-etm3x 801af000.ptm: PTM 1.0 initialized [ 2.897399] input: gpio_keys as /devices/soc0/gpio_keys/input/input1 [ 2.909454] ab8500-rtc ab8500-rtc.0: setting system clock to 2000-04-16 12:59:37 UTC (955889977) [ 2.918823] thermal cooling_device0: thermal-cpufreq-0 bind to 0: 0-succeed [ 2.925903] thermal cooling_device0: thermal-cpufreq-0 bind to 1: 0-succeed [ 2.932922] thermal cooling_device0: thermal-cpufreq-0 bind to 2: 0-succeed [ 2.939910] db8500-cpufreq-cooling soc:cpufreq-cooling: Cooling device registered: thermal-cpufreq-0 [ 2.954071] db8500-esram12: disabling [ 2.957824] db8500-esram34: disabling [ 2.961822] V-CSI/DSI: disabling [ 2.965087] mmci-reg: disabling [ 2.968414] ALSA device list: [ 2.971405] #0: MOP500-card [ 2.974761] uart-pl011 80007000.uart: DMA channel TX dma0chan24 [ 2.980712] uart-pl011 80007000.uart: DMA channel RX dma0chan25 [ 2.986999] Waiting for root device /dev/mmcblk0p4... cu: Got hangup signal Connected. cu: waitpid: No child processes Connected.

Disconnected.

[PYBOOT] [snowball 01:56]: Timed out waiting for "<type 'str'>":

[PYBOOT] [snowball 01:57]: got exception: timeout ~$off

[PYBOOT] [snowball 01:58]: Done. Board wandboard-arm-imx_v6_v7_defconfig failure log: -------------------------------------------------

[ 20.112341] mmcblk0: error -110 sending status command, retrying [ 20.120791] mmcblk0: error -110 sending status command, retrying [ 20.129254] mmcblk0: error -110 sending status command, aborting INIT: INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty" INIT: cannot execute "/sbin/get[ 20.144218] mmcblk0: error -110 sending status command, retrying ty" INIT: cannot execute "/sbi[ 20.155549] mmcblk0: error -110 sending status command, retrying n/getty" INIT: Id "5" respawni[ 20.164291] mmcblk0: error -110 sending status command, aborting ng too fast: disabled for 5 minutes [ 20.175989] mmcblk0: error -110 sending status command, retrying [ 20.184418] mmcblk0: error -110 sending status command, retrying [ 20.192911] mmcblk0: error -110 sending status command, aborting [ 20.203948] mmcblk0: error -110 sending status command, retrying [ 20.212420] mmcblk0: error -110 sending status command, retrying [ 20.220866] mmcblk0: error -110 sending status command, aborting [ 20.231853] mmcblk0: error -110 sending status command, retrying [ 20.240386] mmcblk0: error -110 sending status command, retrying [ 20.248836] mmcblk0: error -110 sending status command, aborting [ 20.259844] mmcblk0: error -110 sending status command, retrying [ 20.268285] mmcblk0: error -110 sending status command, retrying [ 20.276762] mmcblk0: error -110 sending status command, aborting INIT: cannot execute "/sbin/getty"cannot execute "/sbin/getty" INIT: cannot execute "/sbin/getty" INIT: INIT: cannot execute "/sbin/getty"Id "1" respawning too fast: disabled for 5 minutes

INIT: Id "2" respawning too fast: disabled for 5 minutes INIT: Id "4" respawning too fast: disabled for 5 minutes INIT: INIT: cannot execute "/sbin/getty"Id "6" respawning too fast: disabled for 5 minutes

INIT: Id "S1" respawning too fast: disabled for 5 minutes INIT: no more processes left in this runlevel [ 52.005221] random: nonblocking pool is initialized

[PYBOOT] [wandboard 02:55]: Timed out waiting for "<type 'str'>":

[PYBOOT] [wandboard 02:56]: got exception: timeout ~$off

[PYBOOT] [wandboard 02:57]: Done.