Tree/Branch: next Git describe: next-20140424 Failed boot tests (console logs at the end) =========================================== omap5-uevm: FAIL: arm-omap2plus_defconfig bcm28155-ap: FAIL: arm-multi_v7_defconfig
Full Report ===========
arm-davinci_all_defconfig ------------------------- legacy,dm365evm 0 min 17.2 sec: PASS da850-evm 0 min 15.4 sec: PASS
arm-tegra_defconfig ------------------- tegra30-beaver 0 min 22.7 sec: PASS
arm-omap2plus_defconfig ----------------------- legacy,3730xm 0 min 53.0 sec: PASS am335x-boneblack 0 min 44.9 sec: PASS omap3-beagle-xm 0 min 58.5 sec: PASS legacy,3530beagle 1 min 2.3 sec: PASS (Warnings: 1) omap4-panda 1 min 6.5 sec: PASS (Warnings: 1) omap3-overo-tobi 0 min 23.3 sec: PASS (Warnings: 1) am335x-bone 0 min 27.4 sec: PASS omap3-overo-storm-tobi 0 min 25.1 sec: PASS omap5-uevm 1 min 18.7 sec: FAIL omap3-n900 0 min 43.5 sec: PASS (Warnings: 1) legacy,n900 0 min 48.4 sec: PASS (Warnings: 1) omap4-panda-es 1 min 6.1 sec: PASS (Warnings: 1) legacy,3730storm 0 min 22.6 sec: PASS legacy,3530overo 0 min 21.4 sec: PASS (Warnings: 1)
arm-imx_v6_v7_defconfig ----------------------- imx6dl-wandboard,wand-dual 0 min 18.6 sec: PASS imx6dl-wandboard,wand-solo 0 min 18.9 sec: PASS imx6q-wandboard 0 min 17.3 sec: PASS
arm-multi_v7_defconfig ---------------------- qcom-apq8074-dragonboard 0 min 17.4 sec: PASS ste-snowball 1 min 20.7 sec: PASS tegra30-beaver 0 min 19.9 sec: PASS am335x-boneblack 0 min 36.9 sec: PASS omap3-beagle-xm 0 min 52.2 sec: PASS sun7i-a20-cubieboard2 0 min 12.1 sec: PASS armada-370-mirabox 0 min 22.5 sec: PASS omap4-panda 0 min 55.4 sec: PASS (Warnings: 1) armada-xp-openblocks-ax3-4 0 min 25.7 sec: PASS sun4i-a10-cubieboard 0 min 18.7 sec: PASS bcm28155-ap 0 min 44.7 sec: FAIL omap3-overo-tobi 0 min 22.0 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-solo 0 min 17.9 sec: PASS am335x-bone 0 min 27.6 sec: PASS omap3-overo-storm-tobi 0 min 23.9 sec: PASS omap5-uevm 1 min 43.3 sec: PASS (Warnings: 1) omap3-n900 0 min 33.7 sec: PASS (Warnings: 1) imx6q-wandboard 0 min 17.2 sec: PASS omap4-panda-es 0 min 56.3 sec: PASS (Warnings: 1) imx6dl-wandboard,wand-dual 0 min 18.3 sec: PASS
arm-sunxi_defconfig ------------------- sun7i-a20-cubieboard2 0 min 22.9 sec: PASS sun4i-a10-cubieboard 0 min 17.9 sec: PASS
arm-bcm_defconfig ----------------- bcm28155-ap 0 min 24.8 sec: PASS
arm-exynos_defconfig -------------------- exynos5420-arndale-octa 0 min 32.6 sec: PASS exynos5250-arndale 0 min 29.9 sec: PASS
arm-u8500_defconfig ------------------- ste-snowball 0 min 34.4 sec: PASS
arm-mvebu_v7_defconfig ---------------------- armada-xp-openblocks-ax3-4 0 min 22.3 sec: PASS armada-370-mirabox 0 min 20.3 sec: PASS
arm-sama5_defconfig ------------------- sama5d35ek 0 min 17.2 sec: PASS
Console logs for failures =========================
arm-omap2plus_defconfig -----------------------
omap5-uevm: FAIL: last 80 lines of boot log: --------------------------------------------
USB0: USB EHCI 1.00 scanning bus 0 for devices... found: 002/083 2 3 USB Device(s) found scanning usb for storage devices... 0 Storage Device(s) found scanning usb for ethernet devices... 1 Ethernet Device(s) found U-Boot# setenv autoload no; setenv autoboot no setenv autoload no; setenv autoboot no U-Boot# dhcp dhcp Waiting for Ethernet connection... done. BOOTP broadcast 1 EHCI timed out on TD - token=0x8008d80 BOOTP broadcast 2 DHCP client bound to address 192.168.1.200 U-Boot#setenv serverip 192.168.1.2 setenv serverip 192.168.1.2 U-Boot# if test -n ${netargs}; then run netargs; fi if test -n ${netargs}; then run netargs; fi U-Boot# tftp 0x82000000 192.168.1.2:tmp/omap5uevm-M26b98/zImage tftp 0x82000000 192.168.1.2:tmp/omap5uevm-M26b98/zImage Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.200 Filename 'tmp/omap5uevm-M26b98/zImage'. Load address: 0x82000000 Loading: *T ################################################################# ################################################################# ################################################################# ################################################################# ################################## 448.2 KiB/s done Bytes transferred = 4310088 (41c448 hex) U-Boot# tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot tftp 0x81000000 192.168.1.2:buildroot.cpio.gz.uboot Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.200 Filename 'buildroot.cpio.gz.uboot'. Load address: 0x81000000 Loading: *EHCI timed out on TD - token=0x8008d80 T ############################################ 69.3 KiB/s done Bytes transferred = 642602 (9ce2a hex) U-Boot# tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-M26b98/omap5-uevm.dtb tftp 0x80f80000 192.168.1.2:tmp/omap5uevm-M26b98/omap5-uevm.dtb Waiting for Ethernet connection... done. Using sms0 device TFTP from server 192.168.1.2; our IP address is 192.168.1.200 Filename 'tmp/omap5uevm-M26b98/omap5-uevm.dtb'. Load address: 0x80f80000 Loading: *EHCI timed out on TD - token=0x8008d80 T #### 7.8 KiB/s done Bytes transferred = 44972 (afac hex) U-Boot# printenv bootargs printenv bootargs bootargs=console=ttyO2,115200n8 debug earlyprintk ip=192.168.1.200:192.168.1.2:192.168.1.254:255.255.255.0:::none:192.168.1.254 U-Boot# bootz 0x82000000 0x81000000 0x80f80000 bootz 0x82000000 0x81000000 0x80f80000 Kernel image @ 0x82000000 [ 0x000000 - 0x41c448 ] ## Loading init Ramdisk from Legacy Image at 81000000 ... Image Name: Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 642538 Bytes = 627.5 KiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 80f80000 Booting using the fdt blob at 0x80f80000 Using Device Tree in place at 80f80000, end 80f8dfab
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 78.65 seconds. # PYBOOT: Result: FAIL
arm-multi_v7_defconfig ----------------------
bcm28155-ap: FAIL: last 80 lines of boot log: ---------------------------------------------
~$fastboot tmp/capri-SjFdhc/zImage tmp/capri-SjFdhc/bcm28155-ap.dtb None fastboot Adding: abi, offset 0x00000100, size 0x0000000000020000, flags 0x00000000 Adding: loader, offset 0x00000300, size 0x0000000000020000, flags 0x00000000 Adding: u-boot, offset 0x00011000, size 0x0000000000100000, flags 0x00000000 Adding: hw-blob, offset 0x00011800, size 0x0000000000040000, flags 0x00000000 Adding: u-boot-env, offset 0x00011a00, size 0x0000000000001000, flags 0x00000000 Adding: Command(capri console)> fastboot tmp/capri-SjFdhc/zImage tmp/capri-SjFdhc/bcm28155-ap.dtb None device-tree, offset 0x00011a80, size 0x0000000000020000, flags 0x00000000 Adding: kernel, offset 0x0001c000, size 0x0000000001000000, flags 0x00000000 Adding: file-system, offset 0x00024000, size 0x00000000a0000000, flags 0x00000000 Adding: initrd, offset 0x00524000, size 0x0000000002000000, flags 0x00000000
(user:khilman) Fastboot capri eS Su USB speed: High GET_DESC ->DEVICE DESC eS USB speed: High GET_DESC ->DEVICE DESC GET_DESC ->CONFIG DESC GET_DESC ->CONFIG DESC GET_DESC ->STRING DESC GET_DESC ->STRING DESC GET_DESC ->STRING DESC GET_DESC ->STRING DESC SET_CONFIG GET_DESC ->STRING DESC GET_DESC ->STRING DESC GET_DESC ->STRING DESC sending 'kernel' (4582 KB)... ................................................................................ ...............................................................OKAY [ 0.440s] writing 'kernel'...
downloading of 4692456 bytes finished Flashing Raw Image Writing to partition 'kernel' Writing 'kernel' DONE! OKAY [ 0.815s] finished. total time: 1.255s GET_DESC ->STRING DESC sending 'device-tree' (7 KB)... OKAY [ 0.001s]
writing 'device-tree'... downloading of 7575 bytes finished Flashing Raw Image Writing to partition 'device-tree' Writing 'device-trOKAY [ 0.012s] finished. total time: 0.014s ee' DONE! GET_DESC ->STRIunknown partition 'initrd' error: NG DESC cannot determine image filename for 'initrd' GET_DESC ->STRINresuming boot... G DESC OKAY [ 0.000s] finished. total time: 0.000s
MMC read: dev # 0, block # 72320, count 16384 ... ['/home/khilman/bin/fastboot.py', 'capri', 'tmp/capri-SjFdhc/zImage', 'tmp/capri-SjFdhc/bcm28155-ap.dtb', 'None'] /home/khilman/bin/fastboot.py capri tmp/capri-SjFdhc/zImage tmp/capri-SjFdhc/bcm28155-ap.dtb None TFTP: download kernel (tmp/capri-SjFdhc/zImage) to /tmp/kernel-3sdxUM TFTP: download dtb (tmp/capri-SjFdhc/bcm28155-ap.dtb) to /tmp/dtb-bex1X5 Deleting /tmp/kernel-3sdxUM Deleting /tmp/dtb-bex1X5 16384 blocks read: OK
MMC read: dev # 0, block # 114688, count 32768 ... 32768 blocks read: OK ## Flattened Device Tree blob at 9e000000 Booting using the fdt blob at 0x9e000000 Using Device Tree in place at 9e000000, end 9e004d96
Starting kernel ...
~$off # PYBOOT: Exception: kernel: ERROR: did not start booting. # PYBOOT: Time: 44.67 seconds. # PYBOOT: Result: FAIL
On Thu, Apr 24, 2014 at 8:02 AM, Kevin's boot bot khilman@linaro.org wrote:
Tree/Branch: next Git describe: next-20140424 Failed boot tests (console logs at the end) =========================================== omap5-uevm: FAIL: arm-omap2plus_defconfig
This one was a(nother) case of kernel uncompressing and overwriting DTB. Fixing load addresses in u-boot env makes it boot again.
bcm28155-ap: FAIL: arm-multi_v7_defconfig
This one still under investigation.
Kevin
kernel-build-reports@lists.linaro.org