== Progress ==
* Thursday off (2/10)
* Buildbots (CARD-1823 1/10)
- Fixing llvm-apm-01 (disk problem)
- Fixing llvm-d01-04 (my bad)
* Releases (CARD-1431 1/10)
- Spinning release 3.5.2 RC1, all green
* Automation Framework (CARD-1378 3/10)
- A lot of time wasted in infra shenanigans
* Background (3/10)
- Code review, meetings, discussions, etc.
- Reviewing, testing and committing ARM11 patch by Tinti
- Getting ircproxy to work
- Broken bots a-plenty
== Plan ==
* Fork LLVM lab out of TCWG
* Zillions of patches to review
* Continue target description changes
* Welcome Adhemerval, setup LLD track
* Catch up with Omair on LLDB
# Progress #
* aarch64 gdb , TCWG-652, [7/10]
** TCWG-663, TCWG-680: closed, as patches are committed
** TCWG-681, TCWG-664: in progress, patches are posted upstream for
review.
The current FSF mainline GDB on aarch64-linux only has 46 FAILs
in the remote testing!
* arm gdb remote testing on pandaboard, [1/10]
There are 3584 FAILs! Have no chance to triage them yet.
* fsf gdb, [2/10]
** Clean up gdbarch method cannot_step_breakpoint.
** Take a look at the state of C++ move in GDB. Offer some help on this
project.
* misc [1/10]
** Meeting and internal trainings.
# Plan #
* Other cards under TCWG-652.
* TCWG-682, Investigate on GDB/LLDB performance.
* Write up some slides to help people understand what GDB can
do for the incoming meeting.
--
Yao
Hi all
I am trying to compile poky-dizzy-12.0.1(MACHINE ?= "beaglebone") using
meta-toolchain.
so i downloaded dizzy from
http://downloads.yoctoproject.org/releases/yocto/yocto-1.7.
1/poky-dizzy-12.0.1.tar.bz2
meta-linaro from
https://git.linaro.org/openembedded/meta-linaro.git
I have changed bblayers.conf as below
# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf
# changes incompatibly
LCONF_VERSION = "6"
BBPATH = "${TOPDIR}"
BBFILES ?= ""
BBLAYERS ?= " \
/home/praveenk/work/poky-dizzy-12.0.1/meta \
/home/praveenk/work/poky-dizzy-12.0.1/meta-yocto \
/home/praveenk/work/poky-dizzy-12.0.1/meta-yocto-bsp \
/home/praveenk/work/poky-dizzy-12.0.1/meta-linaro/meta-linaro-toolchain \
"
BBLAYERS_NON_REMOVABLE ?= " \
/home/praveenk/work/poky-dizzy-12.0.1/meta \
/home/praveenk/work/poky-dizzy-12.0.1/meta-yocto \
I added required changes in local.conf
MACHINE ?= "beaglebone"
DEFAULTTUNE = "cortexa8hf-neon"
PREFERRED_PROVIDER_glibc ?= "glibc"
PREFERRED_VERSION_gcc ?= "linaro-4.9%"
PREFERRED_VERSION_gcc-cross ?= "linaro-4.9%"
PREFERRED_VERSION_gcc-cross-initial ?= "linaro-4.9%"
PREFERRED_VERSION_gcc-cross-intermediate ?= "linaro-4.9%"
PREFERRED_VERSION_gcc-cross-canadian ?= "linaro-4.9%"
PREFERRED_VERSION_gcc-crosssdk ?= "linaro-4.9%"
PREFERRED_VERSION_gcc-crosssdk-initial ?= "linaro-4.9%"
PREFERRED_VERSION_gcc-crosssdk-intermediate ?= "linaro-4.9%"
PREFERRED_VERSION_gcc-runtime ?= "linaro-4.9%"
PREFERRED_VERSION_nativesdk-gcc-runtime ?= "linaro-4.9%"
PREFERRED_VERSION_libgcc ?= "linaro-4.9%"
PREFERRED_VERSION_nativesdk-libgcc ?= "linaro-4.9%"
PREFERRED_VERSION_gcc-cross-canadian-${TRANSLATED_TARGET_ARCH} ?=
"linaro-4.9%"
but still it is building gcc-4.9 instead of gcc-linaro-4.9
below is the log
WARNING: Could not copy license file COPYING: [Errno 2] No such file or
directory:
'/home/praveenk/work/poky-dizzy-12.0.1/build/tmp/work-shared/gcc-linaro-4.9-r2014.11/gcc-linaro-4.9-2014.11/COPYING'
WARNING: Could not copy license file COPYING: [Errno 2] No such file or
directory:
'/home/praveenk/work/poky-dizzy-12.0.1/build/tmp/work-shared/gcc-linaro-4.9-r2014.11/gcc-linaro-4.9-2014.11/COPYING'
WARNING: Could not copy license file COPYING3: [Errno 2] No such file or
directory:
'/home/praveenk/work/poky-dizzy-12.0.1/build/tmp/work-shared/gcc-linaro-4.9-r2014.11/gcc-linaro-4.9-2014.11/COPYING3'
WARNING: Could not copy license file COPYING3: [Errno 2] No such file or
directory:
'/home/praveenk/work/poky-dizzy-12.0.1/build/tmp/work-shared/gcc-linaro-4.9-r2014.11/gcc-linaro-4.9-2014.11/COPYING3'
WARNING: Could not copy license file COPYING3.LIB: [Errno 2] No such file
or directory:
'/home/praveenk/work/poky-dizzy-12.0.1/build/tmp/work-shared/gcc-linaro-4.9-r2014.11/gcc-linaro-4.9-2014.11/COPYING3.LIB'
WARNING: Could not copy license file COPYING3.LIB: [Errno 2] No such file
or directory:
'/home/praveenk/work/poky-dizzy-12.0.1/build/tmp/work-shared/gcc-linaro-4.9-r2014.11/gcc-linaro-4.9-2014.11/COPYING3.LIB'
WARNING: Could not copy license file COPYING.LIB: [Errno 2] No such file or
directory:
'/home/praveenk/work/poky-dizzy-12.0.1/build/tmp/work-shared/gcc-linaro-4.9-r2014.11/gcc-linaro-4.9-2014.11/COPYING.LIB'
WARNING: Could not copy license file COPYING.LIB: [Errno 2] No such file or
directory:
'/home/praveenk/work/poky-dizzy-12.0.1/build/tmp/work-shared/gcc-linaro-4.9-r2014.11/gcc-linaro-4.9-2014.11/COPYING.LIB'
WARNING: Could not copy license file COPYING.RUNTIME: [Errno 2] No such
file or directory:
'/home/praveenk/work/poky-dizzy-12.0.1/build/tmp/work-shared/gcc-linaro-4.9-r2014.11/gcc-linaro-4.9-2014.11/COPYING.RUNTIME'
WARNING: Could not copy license file COPYING.RUNTIME: [Errno 2] No such
file or directory:
'/home/praveenk/work/poky-dizzy-12.0.1/build/tmp/work-shared/gcc-linaro-4.9-r2014.11/gcc-linaro-4.9-2014.11/COPYING.RUNTIME'
ERROR: Function failed: do_configure (log file is located at
/home/praveenk/work/poky-dizzy-12.0.1/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/libgcc/linaro-4.9-r2014.11/temp/log.do_configure.26074)
ERROR: Logfile of failure stored in:
/home/praveenk/work/poky-dizzy-12.0.1/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/libgcc/linaro-4.9-r2014.11/temp/log.do_configure.26074
Log data follows:
| DEBUG: Executing python function sysroot_cleansstate
| DEBUG: Python function sysroot_cleansstate finished
| DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common',
'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi', 'common']
| DEBUG: Executing shell function autotools_preconfigure
| DEBUG: Shell function autotools_preconfigure finished
| DEBUG: Executing python function autotools_copy_aclocals
| DEBUG: Python function autotools_copy_aclocals finished
| DEBUG: Executing shell function do_configure
| 0 blocks
| chmod: cannot access
'/home/praveenk/work/poky-dizzy-12.0.1/build/tmp/work-shared/gcc-linaro-4.9-r2014.11/gcc-linaro-4.9-2014.11/libgcc/configure':
No such file or directory
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed: do_configure (log file is located at
/home/praveenk/work/poky-dizzy-12.0.1/build/tmp/work/cortexa9hf-vfp-neon-poky-linux-gnueabi/libgcc/linaro-4.9-r2014.11/temp/log.do_configure.26074)
ERROR: Task 692
(/home/praveenk/work/poky-dizzy-12.0.1/meta-linaro/meta-linaro-toolchain/recipes-devtools/gcc/
libgcc_linaro-4.9.bb, do_configure) failed with exit code '1'
== Progress ==
LLDB development
-- Got lldb-server executable running on aarch64 target but debug
connection not working [1/10] [TCWG-640]
-- Got lldb-server executable running on arm target [1/10] [TCWG-641]
-- Started collecting missing pieces for arm lldb linux run control
support [2/10]
-- Written wiki pages for LLDB developer process [1/10]
GDB Development
-- Started writing tests for arm-gdb instruction recording [0.5/10] [TCWG-677]
-- Started writing tests for aarch64-gdb instruction recording
[0.5/10] [TCWG-517]
Miscellaneous [3/10]
-- Trying out 96board network setup with powered usb ethernet dongle
-- Emails/Meetings etc
-- Sick Day on Friday 13th March
== Plan ==
More work for ARM and AArch64 support in LLDB
Do some more work on arm/aarch64 gdb instruction recording tests
== Progress ==
LLDB Development
-- Tried lldb-server cross build for AArch64 target on x86 host
[1/10] [TCWG-640]
-- Tried lldb-server cross build for ARM target on x86 host [4/10] [TCWG-641]
GDB Development
-- Started writing tests for arm-gdb instruction recording [3/10] [TCWG-677]
-- Started writing tests for aarch64-gdb instruction recording
[1/10] [TCWG-517]
Miscellaneous [1/10]
-- Some work on setting up 96board for testing lldb-server
-- Emails/Meetings etc
== Plan ==
More work for ARM and AArch64 support in LLDB
Do some more work on arm/aarch64 gdb instruction recording tests
* ASAN/TSAN run on 42 bit VA Aarch64 with 64 bit allocators (TCWG-634) (3/10)
Tried various allocator sizes in juno, still fails.
On amd-01, Debugging LLVM test failures in gdb.
* Emails, meetings. (2/10)
* Linaro 1-1 with christophe. status call.
* AMD meetings/event, 1-1 with AMD manager, status meeting.
* GCC mailing list.
* AMD internal meeting (4/10)
* Half day off on 12/3/2015(1/10)
== Plan ==
*Continue TSAN/ASAN support look why 64 allocator on juno is failing .
* Bug869
== Progress ==
Off sick [4/10]
Backporting [2/10]
. unexpected conflicts and test failures meant that previous attempts
were abandoned
. will try again for 2015.04
Benchmarking [1/10]
. one config failed, restarted in Jenkins
. accessing Jenkins benchmarks still requires help from Bernie due to
permissions
Misc [3/10]
. emails about bugs
. meetings
. verification of lab fixes
