Hi Guys,
Could you please let me know which release of toolchain support v8.2-A CPU? How to get it?
https://www.linaro.org/downloads/
Thanks
David
IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
Oh dear...
Adding linaro-toolchain(a)lists.linaro.org to see what they have to say
(and linaro-uefi, because it's useful information for subscribers of that).
Regards,
Leif
On Tue, Feb 21, 2017 at 08:09:53PM +0000, Evan Lloyd wrote:
> To add to Alexei's comments:
> It seems there is a bug in the newer GCC Pre-processor that messes with the file case.
> (He is currently checking what file system flags might be affecting that, but older versions work fine).
>
> The questions I'd add are:
> Is there someone in Linaro who we might discuss the problem with (on the GCC side)? I think there are Linaro guys involved with it, and they may be able to tell us it is confusion on our part.
> Should we be trying to upstream the fix, or just wait for a new GCC?
>
> Regards,
> Evan
>
>
>
> From: Alexei Fedorov
> Sent: 21 February 2017 16:37
> To: ard.biesheuvel(a)linaro.org; ryan.harkin(a)linaro.org; leif.lindholm(a)linaro.org; Evan Lloyd; Sami Mujawar; Girish Pathak
> Cc: Mitch Ishihara; Alexei Fedorov
> Subject: Problem with building AML file from Dsdt.asl for Juno
>
>
> Hello,
>
>
>
> We are facing a problem when compiling Juno's Dsdt.asl file with the following GCC builds:
>
>
>
> gcc-linaro-5.3.1-2016.05-i686-mingw32_aarch64-elf
>
> gcc-linaro-6.1.1-2016.08-i686-mingw32_aarch64-elf
>
> gcc-linaro-6.2.1-2016.11-i686-mingw32_aarch64-elf
>
> gcc-linaro-6.3.1-2017.02-i686-mingw32_aarch64-elf
>
>
>
> which all show a similar error:
>
>
>
> ...
> Trim --source-code -l -o k:\Build\ArmJuno\DEBUG_GCC5\AARCH64\OpenPlatformPkg\Platforms\ARM\Juno\AcpiTables\AcpiTables\OUTPUT\.\Dsdt.iiii k:\Build\ArmJuno\DEBUG_GCC5\AARCH64\OpenPlatformPkg\Platforms\ARM\Juno\AcpiTables\AcpiTables\OUTPUT\.\Dsdt.iii
> "C:\ASL\iasl" -pk:\Build\ArmJuno\DEBUG_GCC5\AARCH64\OpenPlatformPkg\Platforms\ARM\Juno\AcpiTables\AcpiTables\OUTPUT\.\Dsdt.aml k:\Build\ArmJuno\DEBUG_GCC5\AARCH64\OpenPlatformPkg\Platforms\ARM\Juno\AcpiTables\AcpiTables\OUTPUT\.\Dsdt.iiii
> Error 6126 - Input file does not appear to be an ASL or data table source file
> Intel ACPI Component Architecture
> make: *** [Makefile:325: k:\Build\ArmJuno\DEBUG_GCC5\AARCH64\OpenPlatformPkg\Platforms\ARM\Juno\AcpiTables\AcpiTables\OUTPUT\Dsdt.aml] Error -1
>
>
>
> It looks like the problem is with GCC pre-processor running on Dsdt.i file (created after
>
> Trim --asl-file -o k:\Build\ArmJuno\DEBUG_GCC5\AARCH64\OpenPlatformPkg\Platforms\ARM\Juno\AcpiTables\AcpiTables\OUTPUT\.\Dsdt.i -i k:\Build\ArmJuno\DEBUG_GCC5\AARCH64\OpenPlatformPkg\Platforms\ARM\Juno\AcpiTables\AcpiTables\OUTPUT\inc.lst k:\OpenPlatformPkg\Platforms\ARM\Juno\AcpiTables\Dsdt.asl
>
> )
>
>
>
> See:
>
>
> "C:\gcc-linaro-6.3.1-2017.02-i686-mingw32_aarch64-elf\bin\aarch64-elf-gcc" -x c -E -include AutoGen.h -Ik:\OpenPlatformPkg\Platforms\ARM\Juno\AcpiTables -Ik:\Build\ArmJuno\DEBUG_GCC5\AARCH64\OpenPlatformPkg\Platforms\ARM\Juno\AcpiTables\AcpiTables\DEBUG -Ik:\ArmPkg -Ik:\ArmPkg\Include -Ik:\ArmPlatformPkg -Ik:\ArmPlatformPkg\Include -Ik:\ArmPlatformPkg\ArmVExpressPkg -Ik:\ArmPlatformPkg\ArmVExpressPkg\Include -Ik:\ArmPlatformPkg\ArmJunoPkg -Ik:\ArmPlatformPkg\ArmJunoPkg\Include -Ik:\EmbeddedPkg -Ik:\EmbeddedPkg\Include -Ik:\MdePkg -Ik:\MdePkg\Include -Ik:\MdePkg\Include\AArch64 -Ik:\MdeModulePkg -Ik:\MdeModulePkg\Include -Ik:\OpenPlatformPkg\Platforms\ARM\Juno\AcpiTablesk:\Build\ArmJuno\DEBUG_GCC5AARCH64OpenPlatformPkg\Platforms\ARM\Juno\AcpiTables\AcpiTables\OUTPUT\.\Dsdt.i > k:\Build\ArmJuno\DEBUG_GCC5\AARCH64\OpenPlatformPkg\Platforms\ARM\Juno\AcpiTables\AcpiTables\OUTPUT\.\Dsdt.iii
>
>
>
> For all GCC versions above, the 1st line of Dsdt.iii lists its name & full path in lowercase:
>
> # 1 "k:\\build\\armjuno\\debug_gcc5\\aarch64\\openplatformpkg\\platforms\\arm\\juno\\acpitables\\acpitables\\output\\dsdt.i"
>
>
>
> Compare it with Dsdt.iii after pre-processing by GCC from gcc-linaro-4.9.4-2017.01-i686-mingw32_aarch64-elf release:
>
> # 1 "k:\\Build\\ArmJuno\\DEBUG_GCC49\\AARCH64\\OpenPlatformPkg\\Platforms\\ARM\\Juno\\AcpiTables\\AcpiTables\\OUTPUT\\.\\Dsdt.i"
>
>
>
> For GCC 5.3.1 & above Dsdt.iiii created by
>
> Trim --source-code -l -o k:\Build\ArmJuno\DEBUG_GCC5\AARCH64\OpenPlatformPkg\Platforms\ARM\Juno\AcpiTables\AcpiTables\OUTPUT\.\Dsdt.iiii k:\Build\ArmJuno\DEBUG_GCC5\AARCH64\OpenPlatformPkg\Platforms\ARM\Juno\AcpiTables\AcpiTables\OUTPUT\.\Dsdt.iii
>
>
>
> has 0 length, which causes iASL compiler to fail with:
>
> Error 6126 - Input file does not appear to be an ASL or data table source file
>
>
>
> We've got a workaround solution for that problem which involves modification of \BaseTools\Conf\build_rule.template:
>
>
>
> In ASL section:
> [Acpi-Source-Language-File]
> <InputFile>
> ?.asl, ?.Asl, ?.ASL
>
>
>
> by replacing 3 lines as below:
>
>
> <Command.GCC, Command.GCCLD>
> # Trim --asl-file -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i -i $(INC_LIST) ${src}
> # "$(ASLPP)" $(ASLPP_FLAGS) $(INC) -I${s_path} $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
> # Trim --source-code -l -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iiii $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iii
> "$(ASLPP)" $(ASLPP_FLAGS) $(INC) -I${s_path} ${src} > $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.i
> Trim --source-code -l -o $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.iiii $(OUTPUT_DIR)(+)${s_dir}(+)${s_base}.I
>
>
>
> Please share your opinion on that matter.
>
>
>
> Alexei.
>
>
>
>
>
>
>
>
>
> IMPORTANT NOTICE: The contents of this email and any attachments are confidential and may also be privileged. If you are not the intended recipient, please notify the sender immediately and do not disclose the contents to any other person, use it for any purpose, or store or copy the information in any medium. Thank you.
=== This Week ===
LLDB ARM/AArch64 hardware breakpoints [TCWG-717] [6/10]
-- Test on Arm hardware and fix issues.
-- Wrote breakpoint command based test-cases for multi-thread tests.
-- Wrote RSP packets based test-cases.
-- Code clean-up, formatting and re basing to latest code.
-- Submit final patch for review after adding tests and arm support.
Initial investigation on LLDB watchpoints set on variables [TCWG-1049] [1/10]
GDB Kernel Awareness [1/10]
-- Looked at STM landing team patches and tried setting up test environment.
LLDB BUD17 Presentation [1/10]
-- Spent some time deciding on content and information gathering.
Miscellaneous Activities [1/10]
-- Meetings, Emails etc.
=== Next Week ===
LLDB ARM/AArch64 hardware breakpoints [TCWG-717]
-- Work on review and up streaming.
LLDB BUD17 Presentation
-- Complete slide deck and submit for review.
GDB Kernel Awareness
-- Test submitted patches and develop understanding of project.
Further investigation on LLDB watchpoints set on variables [TCWG-1049]
1 day in office this week
== Activity ==
[TCWG-617] Range extension thunks
- Reworked patch to finalize dynamic content early and resubmitted for
upstream review
- Investigated what I'll need to do to handle linkerscripts
[BUD17]
Uploaded slide deck
== Plan ==
On holiday till Thursday 1st March
Deal with any last minute Linaro Connect stuff
Continue with Range Extension Thunk work.
== Planned absences ==
Holiday 21st Feb to 1st March
Linaro Connect 6th to 10th March
Euro LLVM 27-28 March
~ Progress ~
* AArch64 OpenOCD. TCWG-947 [4/10]
AArch64 support is merged to mainline. Works with one Hikey I
borrowed from Peter G.
Still doesn't work with mine.
* Upstream patch reviews. [2/10]
** Review Peter B.'s disassembly option patch.
** DWARF implicit_pointer big-endian patch.
** Python event before_prompt patch.
* Off on Thur and Fri. [4/10]
~ Plan ~
* Go to London again on Tue for Schengen visa.
* Back to GDB work, think about SVE GDB patches,
8.0 release, etc.
--
Yao Qi
== This Week ==
* gimplefe (5/10)
- Committed patch to add abs_expr
- Committed patch to fix PR79478
- Committed patch to add fma_expr
- Committed patch to fix ICE's in c_parser_gimple_postfix_expression
- Submitted patch to fix incorrect translation for an invalid
test-case, but decided to drop the
patch after discussing with Richard.
* TCWG-1005 (2/10)
- Formatting fixes
- Patch compiles SPEC2K (not benchmarked)
* PR79588 (1/10)
- Fix discussion with Jakub
* Misc (2/10)
- Meetings
- Connect slides
== Next Week ==
- TCWG-1010, TCWG-1005, gimple-fe
== Progress ==
* Validation
- more work on use of containers, ssh-agent & jenkins problem
- good progress
- committed several improvements to the production jobs too
* misc (conf-calls, meetings, emails, ....)
== Next ==
* ABE & Jenkins jobs patches reviews and bug fixes
* Holidays Feb 27th-March 3rd (week before Connect)
The Linaro Binary Toolchain
============================
The Linaro GCC 6.3-2017.02 Release is now available.
The GCC 6 Release series has significant changes from the GCC 5
release series. For an explanation of the changes please see the
following website:
https://gcc.gnu.org/gcc-6/changes.html
For help in porting to GCC 6 please see the following explanation:
https://gcc.gnu.org/gcc-6/porting_to.html
Download release packages from:
(sources)
http://releases.linaro.org/components/toolchain/gcc-linaro/6.3-2017.02/
(binaries)
http://releases.linaro.org/components/toolchain/binaries/6.3-2017.02/
Previous snapshots and release-candidates are at:
http://snapshots.linaro.org/components/toolchain/binaries/
Previous releases are at:
http://releases.linaro.org/components/toolchain/binaries/
Supported Targets
==================
The Linaro binary toolchain is a collection of x86-hosted GNU
cross-toolchains targeting a variety of ARM architecture targets.
Linaro TCWG provides these toolchains as a service to our members.
Due to hardware availability, system-image availability, validation
complexity, and user-base size, not all host and target toolchain
combinations can be validated by Linaro with the same rigor.
The most rigorously validated targets are little-endian and hardfloat
implementations of the 32-bit ARMv7 (arm), 32-bit ARMv8 (armv8), and
64-bit ARMv8 (aarch64) architectures. Linaro recommends those targets
to our members.
A full list of the supported arm and AArch64 target triples can be
found here:
https://collaborate.linaro.org/display/TCWGPUB/ARM+and+AArch64+Target+Tripl…
Host Requirements
==================
Linaro officially supports the current and previous Ubuntu LTS
releases (as of the time of this release). This does not mean that
the toolchain will not work on other/older Linux distributions. See
the following for the life-time of Ubuntu LTS releases.
https://wiki.ubuntu.com/Releases
The host system upon which the cross-compiler will run requires a
minimum of glibc 2.14, because of API changes to glibc's memcpy API.
https://bugs.linaro.org/show_bug.cgi?id=1869
Linaro recommends using the 64-bit x86_64 host toolchains as the
32-bit i686 host toolchains and the 32-bit mingw host toolchains will
only be provided as long as there is sufficient member interest to
justify their continued availability.
Package Versions
=================
Linaro GCC 6.3-2017.02
http://releases.linaro.org/components/toolchain/gcc-linaro/6.3-2017.02/
Linaro glibc 2.23 (linaro/2.23/master)
https://lists.gnu.org/archive/html/info-gnu/2016-02/msg00009.html
Linaro newlib 2.4-2016.03 (linaro_2.4-branch)
https://sourceware.org/ml/newlib/2016/msg00370.html
Linaro binutils 2.27 (linaro_binutils-2_27-branch)
https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=blob_plain;f=bin…
Linaro GDB 7.12 (gdb-7.12-branch)
https://lists.gnu.org/archive/html/info-gnu/2016-10/msg00007.html
Linaro toolchain package git branches are hosted at:
http://git.linaro.org/toolchain
NEWS for GCC 6 (as of Linaro GCC 6.3-2017.02)
==============================================
* Previous versions of the Linaro GCC 6 toolchain were incorrectly
generating floating-point code for soft-float Linux targets
(arm-linux-gnueabi, and armeb-linux-gnueabi). This escaped detection
until recently because the soft-float targeted toolchains were
configured to use general-purpose registers for passing floating-point
values (which is what you would expect for soft-float toolchains) and
the intra-routine floating-code was not noticed.
The issue would only show up on targets that were run on hardware that
truly didn't have floating-point hardware where the kernel did not
trap and emulate floating-point routines. This has been solved in
Linaro GCC 6.3-2017.02-rc2 by configuring the toolchain (using
--with-float=soft) to generate code without any floating-point
instructions at all (-mfloat-abi=soft).
https://review.linaro.org/#/c/16968/2
This change should not break compatibility between existing binaries
compiled with these toolchains since the float-point parameter passing
ABI is still the same.
* A bug/regression in the compiler has been identified whereby the
target function that is invoked when calling a "weak" function
directly is the "strong" override, whereas when calling the function
via a pointer the "weak" implementation is used. This would be
noticed as inconsistent function invocation when invoking directly vs.
invoking via function pointer. This issue only affected 32-bit arm
targets. This regression has been fixed upstream and backported into
Linaro GCC 6.3-2017.02-rc2.
GCC PR target/78253: [5/6/7 Regression] [ARM] call weak function
instead of strong when called through pointer.
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=78253
Linaro bugzilla #2562: ARM GCC 5.2 call weak function instead of
strong when called through pointer
https://bugs.linaro.org/show_bug.cgi?id=2562
* MS Windows does not support symlinks and the MS Windows archive
extractor does not properly deep copy the symlink target
files/directories into the symlinked directory structure when
unpacking the toolchain archive. This causes problems with missing
dependencies when using the Linaro mingw toolchains, as identified in
the following bugs:
https://bugs.linaro.org/show_bug.cgi?id=2684https://bugs.linaro.org/show_bug.cgi?id=2192https://bugs.linaro.org/show_bug.cgi?id=2762
This has been solved by copying files rather than using symlinks when
the mingw targeted toolchain archives are created.
https://review.linaro.org/#/c/16415/
* Users of Linaro's toolchain have encountered problems when building
projects with Autotools (specifically libtool):
https://bugs.linaro.org/show_bug.cgi?id=2764
The Linaro binary toolchain release contained files with a .la suffix
as artifacts of the toolchain build process. These .la files are
helper files for libtool, but unlike a gcc install tree, they are not
position independent and contain full paths. Since these artifacts
contain absolute paths they can actually mislead user invocation of
libtool into not finding required libraries (because they reference
the build tree, not the install location) and hence breaking Autotools
builds. These *.la file artifacts have been removed from Linaro
toolchain binaries because they are unnecessary for users.
* The Linaro GCC 6.3-2017.01 snapshot added further enablement for
ARMv8-M and these have been incorporated into this release.
* Compiling and statically linking some SPEC2006int tests against
tcmalloc have been failing due to a problem with glibc's memory
allocator function overrides. This was fixed upstream:
https://sourceware.org/bugzilla/show_bug.cgi?id=20432
Backported into Linaro glibc 2.23:
commit 058b5a41d56b9a8860dede14d97dd443792d064b
Author: Florian Weimer <fweimer(a)redhat.com>
Date: Fri Aug 26 22:40:27 2016 +0200
malloc: Simplify static malloc interposition [BZ #20432]
* Host binaries for x86_64 linux hosts now have symbols and debug
information stripped in order to reduce the size of the toolchain
binary archives. This reduces the archive size from 1.5G to 600M for
aarch64-linux-gnu target with the gcc-6-branch.
* The GDB version was upgraded from GDB 7.11 in the Linaro GCC
6.1-2016.08 release to GDB 7.12 in the Linaro GCC 6.2-2016.11 release.
* The Linaro GCC 6.2-2016.10 snapshot added AArch32 support for ARMv8.2
and ARMv8m, as well as some AArch64 fixes for ARMv8.2, and bug fixes
merged from FSF GCC 6.2. This is available in the binary toolchain as
of Linaro GCC 6.2-2016.11.
* Basic tuning support for the Qualcomm qdf24xx was added to the Linaro
GCC 6.2-2016.10 snapshot and is available in the binary toolchain as
of Linaro GCC 6.2-2016.11.
* IFUNC was disabled for baremetal targets, as it was causing test-suite
failures, and is presently a Linux only feature.
* The gold linker was added to this binary release.
* Backported malloc_lock fix into Linaro newlib 2.4.
commit 2665915cfc46aa6403bb2efd473c523d3167e0cb
Author: Andre Vieira (lists) <Andre.SimoesDiasVieira(a)arm.com>
Date: Thu Jun 16 12:23:51 2016 +0100
Re-enable malloc_lock for newlib-nano
* Backported rawmemchr patch into Linaro newlib 2.4.
commit e7b1ee2ea6aa3ee1da41976407410e6202a098c5
Author: Wilco Dijkstra <Wilco.Dijkstra(a)arm.com>
Date: Thu May 12 16:16:58 2016 +0000
Add rawmemchr
* Backported strlen fix when using Thumb-2 and -Os -marm into Linaro
newlib 2.4.
commit 5c02bcc086a96b174e1b9e1445a4a1770070107a
Author: Thomas Preud'homme <thomas.preudhomme(a)arm.com>
Date: Wed May 11 17:18:48 2016 -0400
Fix strlen using Thumb-2 with -Os -marm
* Backported fix for semihosting ARM when heapinfo not provided by
debugger into Linaro newlib 2.4.
commit 5c9403eaf40951f8a4f55ed65f661b485ff44be7
Author: David Hoover <spm2(a)dangerous.li>
Date: Thu Apr 21 07:12:24 2016 +0200
Fixed semihosting for ARM when heapinfo not provided by debugger.
* Merged latest FSF glibc release/2.23/master into Linaro glibc 2.23.
* Backported __ASSUME_REQUEUE_PI check Linaro glibc 2.23 branch.
commit 2d20c3bf918cd94ebd4106693adb3a5c9272baba
Author: Adhemerval Zanella <adhemerval.zanella(a)linaro.org>
Date: Tue May 17 10:16:39 2016 -0300
Add runtime check for __ASSUME_REQUEUE_PI (BZ# 18463)
* Backported removal of __ASSUME_SET_ROBUST_LIST from Linaro glibc 2.23
branch.
commit bb8f09d72756186a3d82a1f7b2adcf8bc1fbaed1
Author: Adhemerval Zanella <adhemerval.zanella(a)linaro.org>
Date: Mon May 16 19:01:10 2016 -0300
Remove __ASSUME_SET_ROBUST_LIST
* Backported removal of __ASSUME_FUTEX_LOCK_PI from Linaro glibc 2.23
branch.
commit e48b4e7fed0de06dd7832ead48bea8ebc813a204
Author: Adhemerval Zanella <adhemerval.zanella(a)linaro.org>
Date: Mon May 16 10:35:25 2016 -0300
Remove __ASSUME_FUTEX_LOCK_PI
* Merged latest FSF binutils-2_27-branch into
linaro_binutils-2_27-branch.
* The libwinpthread DLL is now copied into the host bin directory to
satisfy mingw package dependencies.
* Backported GNU Linker fix.
commit fbc6c6763e70cb2376e2de990c7fc54c0ee44a59
Author: Nick Clifton <nickc(a)redhat.com>
Date: Tue Aug 23 09:45:11 2016 +0100
Fix seg-fault in ARM linker when trying to parse a binary file.
* Backported GNU Assembler fix for PR 20364
commit 5fe7ebe5ab43750abf8f490b785d99a1e598e7fd
Author: Nick Clifton <nickc(a)redhat.com>
Date: Fri Aug 5 10:37:57 2016 +0100
Fix the generation of alignment frags in code sections for AArch64.
https://sourceware.org/bugzilla/show_bug.cgi?id=20364
* Performance related backports from the following snapshots have been
included: Linaro GCC 6.1-2016.06, Linaro GCC 6.1-2016.07, Linaro GCC
6.1-2016.08, Linaro GCC 6.2-2016.09, Linaro GCC 6.2-2016.10, Linaro
GCC 6.2-2016.11, Linaro GCC 6.2-2016.12, and Linaro GCC 6.3-2017.01.
See the following Linaro GCC snapshots:
http://snapshots.linaro.org/components/toolchain/gcc-linaro/6.1-2016.06/http://snapshots.linaro.org/components/toolchain/gcc-linaro/6.1-2016.07/http://snapshots.linaro.org/components/toolchain/gcc-linaro/6.1-2016.08/http://snapshots.linaro.org/components/toolchain/gcc-linaro/6.2-2016.09/http://snapshots.linaro.org/components/toolchain/gcc-linaro/6.2-2016.10/http://snapshots.linaro.org/components/toolchain/gcc-linaro/6.2-2016.11/http://snapshots.linaro.org/components/toolchain/gcc-linaro/6.2-2016.12/http://snapshots.linaro.org/components/toolchain/gcc-linaro/6.3-2017.01/
Contact Linaro
===============
File bugs at http://bugs.linaro.org
For Linaro member support see http://support.linaro.org
For Linaro community support email linaro-toolchain(a)lists.linaro.org
--
Ryan S. Arnold | Director - Linaro Core Technology and Tools
ryan.arnold(a)linaro.org | ryanarn on #linaro-tcwg @ freenode.irc.net
T: +1-612-424-1861
[TCWG-617] Range extension thunks
- Did some refactoring to allow addresses to be assigned to sections
prior to Thunk creation
-- In upstream review
- Investigated lld's implementation of linkerscripts and found out
that they will need some refactoring as well
-- Need to assign addresses more than once
-- Need to insert some thunks at precise points (Mips equivalent of
inline veneers), need to make sure that linkerscript won't reorder the
sections.
[BUD17]
Gave test run of presentation, cut down a lot of the slides as a result
== Plan ==
In office on Monday only, then Holiday to 1st March
- Finalise slides for connect, and work out how to submit them.
- Work out how to do Thunks and linker scripts cleanly
== Planned absences ==
Holiday 21st Feb to 1st March
Linaro Connect 6th to 10th March
Euro LLVM 27-28 March
== Progress ==
* [ARM GlobalISel] Add support for fp arguments [TCWG-1029] [7/10]
- Committed support for double precision hard float and soft-fp
* [ARM GlobalISel] Fix atomic loads/stores after r294993 [TCWG-1041] [1/10]
- Worked on a patch that I'll probably commit next week
* Misc [2/10]
- Meetings, mailing lists, code reviews
== Plan ==
* More code reviews
* More GlobalISel
