Summary:
* Analyze PATH issues for win32 binary toolchain.
Details:
1. Analyze PATH issues for win32 binary toolchain.
* gcc can not find the install dir if user set
PATH="INSTALL_DIR\bin" in dos cmdline, which leads to compile fail
since gcc can not find ../lib, ../libexec, etc.
* Root cause: in dos, " is taken as part of dirs during set PATH,
which is different from cygwin or linux. And dir with " is invalid in
dos.
* Work out a patch to filter " in function make_relative_prefix_1
and discuss it with Michael.
* Create an windows install package, so users do not need to set
PATH. Will discuss more detail with Michael for the following
releases.
2. Read document to ramp-up on gcc.
Plans:
* Feb 6-10: Linaro Connect Q1.12
Best regards!
-Zhenqiang
I've set up a new user on my laptop that we can use for experimenting
with benchmarks during Connect. Here's what we've got:
* A user called 'connect'
* Ramana, Ulrich, Åsa, and myself can log in via SSH
* bzr repo for trunk, 4.6, and gcc-linaro 4.6
* Tarballs of all gcc-linaro 4.4, 4.5, and 4.6 releases
* Tarballs of the recent CSL, Google 4.6, and Android 4.4 compilers
* A sysroot in ~/sysroot
* Cross-binutils etch in ~/cross
* A shared ccache in ~/ccache primed with these
* A ~/env.sh that sets up the right paths etc
* A ~/builds/doconfigure.sh that configures for our standard ARMv7-A
C/C++/Fortran configuration
* EEMBC, DENBench, and SPEC 2000 under ~/benchmarks
The trees under build/ build into build/$ver/build and install into
build/$ver/install.
The benchmarks are set up to cross build and cross run. I've pulled
ursa2 out of the farm and nuked it, so we can do something like:
make CROSS_COMPILE=arm-linux-gnueabi- RUN="$PWD/sshrun ursa2"
to run the benchmarks.
I'll see about perf. We still need to re-baseline the benchmarks and
get perf traces.
Anything else needed?
You can log in and try things if you want. Go through the bounce host
and try connecting as connect@crucis.
-- Michael
Hi Ramana,
as you pointed out, in the gcc.dg/vect/vect-double-reduc-6.c test case,
using compiler options as described in PR 51819, we see the following
inefficient code generation:
vmov.32 r2, d28[0] @ 57 vec_extractv4si [length = 4]
vmov.32 r1, d22[0] @ 84 vec_extractv4si [length = 4]
str r2, [r0, #4] @ 58 *thumb2_movsi_vfp/7 [length =
4]
vmov.32 r3, d0[0] @ 111 vec_extractv4si [length = 4]
str r1, [r0, #8] @ 85 *thumb2_movsi_vfp/7 [length =
4]
vst1.32 {d2[0]}, [r0:64] @ 31 neon_vst1_lanev4si
[length = 4]
str r3, [r0, #12] @ 112 *thumb2_movsi_vfp/7 [length =
4]
bx lr @ 120 *thumb2_return [length = 12]
(The :64 alignment in vst1.32 is incorrect; that is that actual problem in
PR 51819, which is now fixed.)
The reason for this particular code sequence turns out to be as follows:
The middle end tries to store the LSB vector lane to memory, and uses the
vec_extract named pattern to do so. This pattern currently only supports
an "s_register_operand" destination, and is implemented via vmov to a core
register. The contents of that register are then stored to memory. Now
why does any vst1 instruction show up? This is because combine is able to
merge the vec_extract back into the store pattern and ends up with a
pattern that matches neon_vst1_lanev4si. Note that the latter pattern is
actually intended to implement NEON built-ins (vst1_lane_... etc).
Now there seem to be two problems with this scenario:
First of all, the neon_vst1_lane<mode> patterns seem to be actually
incorrect on big-endian systems due to lane-numbering problems. As I
understand it, all NEON intrinsics are supposed to take lane numbers
according to the NEON ordering scheme, while the vec_select RTX pattern is
defined to take lane numbers according to the in-memory order. Those
disagree in the big-endian case. All other patterns implementing NEON
intrinsics therefore avoid using vec_select, and instead resort to using
special UNSPEC codes -- the sole exception to this happens to be
neon_vst1_lane<mode>. It would appear that this is actually incorrect, and
the pattern ought to use a UNSPEC_VST1_LANE unspec instead (that UNSPEC
code is already defined, but nowhere used).
Now if we make that change, then the above code sequence will contain no
vst1 any more. But in any case, expanding first into a vec_extract
followed by a store pattern, only to rely on combine to merge them back
together, is a suboptimal approach. One obvious drawback is that the
auto-inc-dec pass runs before reload, and therefore only sees plain stores
-- with no reason whatsoever to attempt to introduce post-inc operations.
Also, just in general it normally works out best to allow the final choice
between register and memory operands to be make in reload ...
Therefore, I think the vec_extract patterns ought to support *both*
register and memory destination operands, and implement those via vmov or
vst1 in final code generation, as appropriate. This means that we can make
the choice in reload, guided as usual by alternative ordering and/or
penalties -- for example, we can choose to reload the address and still use
vst1 over reloading the contents to a core register and then using an
offsetted store.
Finally, this sequence will also allow the auto-inc-dec pass to do a better
job. The current in-tree pass doesn't manage unfortunately, but with
Richard's proposed replacement, assisted by a tweak to the cost function to
make sure the (future) address reload is "priced in" correctly, I'm now
seeing what appears to be the optimal code sequence:
vst1.32 {d6[0]}, [r0:64]! @ 30 vec_extractv4si/1
[length = 4]
vst1.32 {d22[0]}, [r0]! @ 56 vec_extractv4si/1 [length =
4]
vst1.32 {d2[0]}, [r0:64]! @ 82 vec_extractv4si/1
[length = 4]
vst1.32 {d4[0]}, [r0] @ 108 vec_extractv4si/1 [length =
4]
bx lr @ 116 *thumb2_return [length = 12]
(Again the :64 is wrong; it's already fixed on mainline but I haven't
pulled that change in yet.)
The attached patch implements the above-mentioned changes. Any comments?
I'll try to get some performance numbers as well before moving forward with
the patch ...
(As an aside, it might likewise be helpful to update the vec_set patterns
to allow for memory operands, implemented via vld1.)
(See attached file: diff-gcc-arm-vecextractmem)
B.t.w. I'm wondering how I can properly test:
- that the NEON intrinsics still work
- that everything works on big-endian
Any suggestions would be appreciated!
Mit freundlichen Gruessen / Best Regards
Ulrich Weigand
--
Dr. Ulrich Weigand | Phone: +49-7031/16-3727
STSM, GNU compiler and toolchain for Linux on System z and Cell/B.E.
IBM Deutschland Research & Development GmbH
Vorsitzende des Aufsichtsrats: Martina Koederitz | Geschäftsführung: Dirk
Wittkopp
Sitz der Gesellschaft: Böblingen | Registergericht: Amtsgericht
Stuttgart, HRB 243294
Hi Andrew. gcc-4.7~svn183693 just finished running through the auto
builders and builds and tests in the ARM, Cortex-A9, i686, and x86_64
configurations.
You could base the Linaro 4.7 branch off that. It's r114897 in bzr
and, suitably, Sandra is the author.
-- Michael
For your records:
Loïc wrote a script that pushes the revisions from a GCC branch into
the current development focus. This makes branching on a shared
repository much faster. The script is here:
http://bazaar.launchpad.net/~linaro-toolchain-dev/cbuild/tools/view/head:/e…
and it runs daily on a cronjob as the cbuild user on the 'apus' EC2
instance (phew).
We'll need to update this when 4.7 comes along.
-- Michael
I've gone through the documentation on the wiki about how to get
going with KVM on Fast Models, to clean it up and reorganise it
and add some of the missing bits (notably how to set up a KVM
guest kernel and filesystem). It's now at:
https://wiki.linaro.org/PeterMaydell/KVM/HowTo
The only minor point I'd still like to address is that at the
moment we document the old-style "build your kernel and arguments
into an .axf file" boot-wrapper, because my changes to support
specifying them at model runtime haven't yet gone into the
boot-wrapper git repo. When they do land I'll update the wiki.
(Yes, technically TCWG2011-A15-KVM says "one page summary" but
I thought splitting it into four pages was much clearer :-))
-- PMM
Ken, Åsa: could you add a -O0 and -O1 build to the size and benchmark
results? I'm looking at the writeup and it would be interesting to
contrast the speed/size of -O0 with -O2.
Ta,
-- Michael
Continued work on 64-bit shifts in core registers. This has now been
posted to gcc-patches, and is awaiting review.
64-bit shifts in NEON are also working correctly, but the register
allocator chooses not to use them most of the time. I've begun trying to
work out why, but it's quite involved in ira-costs.c and will take some
unpicking, I think.
Attempted to create a Linaro GCC 4.7 branch, but my test build failed,
so that'll have to wait until it's stabilized a little.
