linaro-toolchain

linaro-toolchain@lists.linaro.org

3 participants
5603 discussions

by Ken Werner

Hi, * got llvm+clang working on ARM: https://wiki.linaro.org/KenWerner/Sandbox/HowToBuildToolchainComponents#llv… * checked whether llvm inlines the __sync_* builtins on ARM or not: https://wiki.linaro.org/WorkingGroups/ToolChain/AtomicMemoryOperations#LLVM * developed a patch for #681138 (tested with current gcc-linaro) * spent some time for bootstrapping the GCC trunk in order to test and post that patch on the ml but wasn't successful (finally ran into the issues discussed at #659713) * did some verification work on #674090 * preparing to work on the "investigate current developer tools" item Regards Ken

14 years, 7 months

Using inline NEON code

by Michael Hope

Hi there. Currently you can't use NEON instructions in inline assembly if the compiler is set to -mfpu=vfp such as Ubuntu's -mfpu=vfpv3-d16. Trying code like this: int main() { asm("veor d1, d2, d3"); return 0; } gives an error message like: test.s: Assembler messages: test.s:29: Error: selected processor does not support Thumb mode `veor d1,d2,d3' The problem is that -mfpu=vfpv3-d16 has two jobs: it tells the compiler what instructions to use, and also tells the assembler what instructions are valid. We might want the compiler to use the VFP for compatibility or power reasons, but still be able to use NEON instructions in inline assembler without passing extra flags. Inserting ".fpu neon" to the start of the inline assembly fixes the problem. Is this valid? Are assembly files with multiple .fpu statements allowed? Passing '-Wa,-mfpu=neon' to GCC doesn't work as gas seems to ignore the second -mfpu. What's the best way to handle this? Some options are: * Add '.fpu neon' directives to the start of any inline assembly * Separate out the features, so you can specify the capabilities with one option and restrict the compiler to a subset with another. Something like '-mfpu=neon -mfpu-tune=vfpv3-d16' * Relax the assembler so that any instructions are accepted. We'd lose some checking of GCC's output though. -- Michael

14 years, 7 months

[ACTIVITY] Nov 29 - Dec 2

by Ira Rosen

- Continued looking into NEON special loads and stores. - Benchmarks: concentrated on EEMBC Telecom: - autcor gets vectorized - viterbi, besides strided data accesses, needs to sink conditional stores to allow if-conversion and make the main loop vectorizable. Since the potential here is 4x, I think it's worthwhile to work on this. - conven, fbital also have control-flow issue, but much more complicated than viterbi - fft has a problem with loop count, I would like to investigate this a bit more - diffmeasure doesn't seem to have vectorization potential - Fixed GCC PR 46663 on trunk, testing the fix for 4.3, 4.4, 4.5.

14 years, 7 months

[PATCH, WIP] NEON quadword vectors in big-endian mode (#10061, #7306)

by Julian Brown

Hi, Here's a work-in-progress patch which fixes many execution failures seen in big-endian mode when -mvectorize-with-neon-quad is in effect (which is soon to be the default, if we stick to the current plan). But, it's pretty hairy, and I'm not at all convinced it's not working "for the wrong reason" in a couple of places. I'm mainly posting to gauge opinions on what we should do in big-endian mode. This patch works with the assumption that quad-word vectors in big-endian mode are in "vldm" order (i.e. with constituent double-words in little-endian order: see previous discussions). But, that's pretty confusing, leads to less than optimal code, and is bound to cause more problems in the future. So I'm not sure how much effort to expend on making it work right, given that we might be throwing that vector ordering away in the future (at least in some cases: see below). The "problem" patterns are as follows. * Full-vector shifts: these don't work with big-endian vldm-order quad vectors. For now, I've disabled them, although they could potentially be implemented using vtbl (at some cost). * Widening moves (unpacks) & widening multiplies: when widening from D-reg to Q-reg size, we must swap double-words in the result (I've done this with vext). This seems to work fine, but what "hi" and "lo" refer to is rather muddled (in my head!). Also they should be expanders instead of emitting multiple assembler insns. * Narrowing moves: implemented by "open-coded" permute & vmovn (for 2x D-reg -> D-reg), or 2x vmovn and vrev64.32 for Q-regs (as suggested by Paul). These seem to work fine. * Reduction operations: when reducing Q-reg values, GCC currently tries to extract the result from the "wrong half" of the reduced vector. The fix in the attached patch is rather dubious, but seems to work (I'd like to understand why better). We can sort those bits out, but the question is, do we want to go that route? Vectors are used in three quite distinct ways by GCC: 1. By the vectorizer. 2. By the NEON intrinsics. 3. By the "generic vector" support. For the first of these, I think we can get away with changing the vectorizer to use explicit "array" loads and stores (i.e. vldN/vstN), so that vector registers will hold elements in memory order -- so, all the contortions in the attached patch will be unnecessary. ABI issues are irrelevant, since vectors are "invisible" at the source code layer generally, including at ABI boundaries. For the second, intrinsics, we should do exactly what the user requests: so, vectors are essentially treated as opaque objects. This isn't a problem as such, but might mean that instruction patterns written using "canonical" RTL for the vectorizer can't be shared with intrinsics when the order of elements matters. (I'm not sure how many patterns this would refer to at present; possibly none.) The third case would continue to use "vldm" ordering, so if users inadvertantly write code such as: res = vaddq_u32 (*foo, bar); instead of writing an explicit vld* intrinsic (for the load of *foo), the result might be different from what they expect. It'd be nice to diagnose such code as erroneous, but that's another issue. The important observation is that vectors from case 1 and from cases 2/3 never interact: it's quite safe for them to use different element orderings, without extensive changes to GCC infrastructure (i.e., multiple internal representations). I don't think I quite realised this previously. So, anyway, back to the patch in question. The choices are, I think: 1. Apply as-is (after I've ironed out the wrinkles), and then remove the "ugly" bits at a later point when vectorizer "array load/store" support is implemented. 2. Apply a version which simply disables all the troublesome patterns until the same support appears. Apologies if I'm retreading old ground ;-). (The CANNOT_CHANGE_MODE_CLASS fragment is necessary to generate good code for the quad-word vec_pack_trunc_<mode> pattern. It would eventually be applied as a separate patch.) Thoughts? Julian ChangeLog gcc/ * config/arm/arm.h (CANNOT_CHANGE_MODE_CLASS): Allow changing mode of vector registers. * config/arm/neon.md (vec_shr_<mode>, vec_shl_<mode>): Disable in big-endian mode. (reduc_splus_<mode>, reduc_smin_<mode>, reduc_smax_<mode>) (reduc_umin_<mode>, reduc_umax_<mode>) (neon_vec_unpack<US>_lo_<mode>, neon_vec_unpack<US>_hi_<mode>) (neon_vec_<US>mult_lo_<mode>, neon_vec_<US>mult_hi_<mode>) (vec_pack_trunc_<mode>, neon_vec_pack_trunc_<mode>): Handle big-endian mode for quad-word vectors.

14 years, 7 months

Building a cross compiler

by Michael Hope

Hi there. I've had a few questions recently about how to build a cross compiler, so I took a stab at writing the steps down in a Makefile. See: https://code.launchpad.net/~michaelh1/+junk/cross-build Hopefully it's easy to follow. It uses a binary sysroot and gives you vanilla binutils 2.20 and Linaro GCC 2010.11 in a good enough way that you can cross-compile for Maverick. The script is minimal and trades readability for flexibility. Note that Marcin's cross compiler packages or the Embedian toolchains are a better way to go, but if you want to see the steps involved check out the script. Marcin or Matthias, would you mind reviewing it? -- Michael

14 years, 7 months

[ACTIVITY] November 21-25

by Ira Rosen

Hi, - the struggle with the board took a lot of time - continued to investigate special loads/stores - looked for benchmarks: EEMBC Consumer filters rgbcmy and rgbyiq should be vectorizable once vld3, vst3/4 are supported EEMBC Telecom viterbi is supposed to give 4x on NEON once vectorized (according to http://www.jp.arm.com/event/pdf/forum2007/t1-5.pdf slide 29). My old version of viterbi is not vectorizable because of if-conversion problems. I'd be really happy to check the new version (it is supposed to be slightly different). Looking into other EEMBC benchmarks. FFMPEG http://www.ffmpeg.org/ (got this from Rony Nandy from User Platforms). It contains hand-vectorized code for NEON. Investigating. I am probably taking a day off on Sunday. Ira

14 years, 7 months

microoptimising atomic memory ops

by Peter Maydell

This wiki page came up during the toolchain call: https://wiki.linaro.org/Internal/People/KenWerner/AtomicMemoryOperations/ It gives the code generated for __sync_val_compare_and_swap as including a push {r4} / pop {r4} pair because it uses too many temporaries to fit them all in callee-saves registers. I think you can tweak it a bit to get rid of that: # int __sync_val_compare_and_swap (int *mem, int old, int new); # if the current value of *mem is old, then write new into *mem # r0: mem, r1 old, r2 new mov r3, r0 # move r0 into r3 dmb sy # full memory barrier .LSYT7: ldrex r0, [r3] # load (exclusive) from memory pointed to by r3 into r0 cmp r0, r1 # compare contents of r0 (mem) with r1 (old) -> updates the condition flag bne .LSYB7 # branch to LSYB7 if mem != old # This strex trashes the r0 we just loaded, but since we didn't take # the branch we know that r0 == r1 strex r0, r2, [r3] # store r2 (new) into memory pointed to by r3 (mem) # r0 contains 0 if the store was successful, otherwise 1 teq r0, #0 # compares contents of r0 with zero -> updates the condition flag bne .LSYT7 # branch to LSYT7 if r0 != 0 (if the store wasn't successful) # Move the value that was in memory into the right register to return it mov r0, r1 dmb sy # full memory barrier .LSYB7: bx lr # return I think you can do a similar trick with __sync_fetch_and_add (although you have to use a subtract to regenerate r0 from r1 and r2). On the other hand I just looked at the gcc code that does this and it's not simply dumping canned sequences out to the assembler, so maybe it's not worth the effort just to drop a stack push/pop. -- PMM

14 years, 7 months

[ACTIVITY] November 22nd-28th

by Julian Brown

== Linaro GCC == * Finished testing patch for lp675347 (QT inline-asm atomics), and send upstream for comments (no response yet). Suggested reverting a patch (which enabled -fstrict-volatile-bitfields by default on ARM) locally for Ubuntu in the bug log. * Continued working on NEON quad-word vectors/big-endian patch. This turned out to be slightly fiddlier than I expected: I think I now have semantics which make sense, though my patch requires (a) slight middle-end changes, and (b) workarounds for unexpected combiner behaviour re: subregs & sign/zero-extend ops. I will send a new version of the patch to linaro-toolchain fairly soon for comments.

14 years, 7 months

A question about thumb2 cbnz/cbz implementation in thumb2.md

by Revital1 Eres

Hello, I have a question about cbnz/cbz thumb-2 instruction implementation in thumb2.md file: I have an example where we jump to a label which appears before the branch; for example: L4 ... cmp r3, 0 bne .L4 It seems that cbnz instruction should be applied in this loop; replacing cmp+bne; however, cbnz fails to be applied as diff = ADDRESS (L4) - ADDRESS (bne .L4) is negative and according to thumb2_cbz in thumb2.md it should be 2<=diff<=128 (please see snippet below taken from thumb2_cbz). So I want to double check if the current implementation of thumb2_cbnz in thumb2.md needs to be changed to enable it. The following is from thumb2_cbnz in thumb2.md: [(set (attr "length") (if_then_else (and (ge (minus (match_dup 1) (pc)) (const_int 2)) (le (minus (match_dup 1) (pc)) (const_int 128)) (eq (symbol_ref ("which_alternative")) (const_int 0))) (const_int 2) (const_int 8)))] Thanks, Revital

14 years, 7 months

[ACTIVITY] Weekly status

by Richard Sandiford

== This week == * More ARM testing of binutils support for STT_GNU_IFUNC. * Implemented the GLIBC support for STT_GNU_IFUNC. Simple ARM testcases seem to run correctly. * Ran the GLIBC testsuite -- which includes some ifunc coverage -- but haven't analysed the results yet. * Started looking at Thumb for STT_GNU_IFUNC. The problem is that BFD internally represents Thumb symbols with an even value and a special st_type (STT_ARM_TFUNC); this is also the old, pre-EABI external representation. We need something different for STT_GNU_IFUNC. * Tried making BFD represent Thumb symbols as odd-value functions internally. I got it to "work", but I wasn't really happy with the results. * Looked at alternatives, and in the end decided that it would be better to have extra internal-only information in Elf_Internal_Sym. This "works" too, and seems cleaner to me. Sent an RFC upstream: http://sourceware.org/ml/binutils/2010-11/msg00475.html * Started writing some Thumb tests for STT_GNU_IFUNC. * Investigated #618684. Turned out to be something that Bernd had already fixed upstream. Tested a backport. == Next week == * More IFUNC tests (ARM and Thumb, EGLIBC and binutils). Richard

14 years, 7 months

Jump to page:

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

linaro-toolchain