- linaro-toolchain - lists.linaro.org

by Peter Maydell

Progress: * UM-2 [QEMU upstream maintainership] - took over pullreq handling from RTH for the next couple of weeks - wrote and sent patches that fix a mishandling of Secure stage 2 translation caused by QEMU not noticing that some config bits are in VTCR_EL2 and some in VSTCR_EL2. Removed an ancient microoptimization that was getting in the way of fixing that. - sent patch fixing incorrect syndrome value for data abort on some post-indexed load/store insns - RTH's SME patchset is now upstream, so now would be a good time to test it if anybody has compiler test cases or similar they were thinking of running under QEMU - softfreeze next Tuesday: started reviewing and collecting up minor patches for a pre-freeze pullreq -- PMM

3 years, 3 months

1
0
0 0

Status of ccache setup on LLVM build bots

by Thiago Jung Bauermann

Hello, I went through the LLVM build bots (and also the libc++ buildkites) and increased their ccache max size. There was a big impact on the flang builds on tcwg-jade-01 (which went from 1h–2h to 10min–30min), but not on other builds. One reason is probably that since I made this change earlier today, there wasn't time yet to finish enough several-hours-long builds to warm up the caches. Since different machines have different disk sizes and free space I chose different ccache max sizes for them, as follows: * tcwg-fx-02 hosts the following build bots: - clang-aarch64-sve-vls-2stage - clang-aarch64-sve-vls - clang-aarch64-sve-vla-2stage - clang-aarch64-sve-vla All share the same ccache. I changed its max size to 20 GB. It's not a lot, but this machine is also used as a dev box so I though it would be good to preserve a fair amount of space. * tcwg-jade-01 hosts the following build bots: - clang-armv8-lld-2stage - clang-armv7-vfpv3-2stage - clang-armv7-global-isel - clang-armv7-quick - clang-armv7-2stage - clang-armv7-lnt - flang-aarch64-latest-gcc - flang-aarch64-rel-assert - flang-aarch64-release - flang-aarch64-latest-clang - flang-aarch64-debug - flang-aarch64-out-of-tree - flang-aarch64-sharedlibs - flang-aarch64-dylib - clang-aarch64-full-2stage - clang-aarch64-global-isel - clang-aarch64-lld-2stage - clang-aarch64-quick All armv7 and armv8 bots share one ccache, and all aarch64 bots share another. I changed the max size of each one to 100 GB. * tcwg-jade-04 hosts the following build bots: - lldb-aarch64-ubuntu - lldb-arm-ubuntu - buildkite-linaro-armv8-libcxx-01 - buildkite-linaro-armv8-libcxx-02 - buildkite-linaro-armv8-libcxx-03 - buildkite-linaro-armv8-libcxx-04 The buildkite bots share a 50 GB ccache, while lldb-arm-ubuntu uses another 50 GB ccache due to being based on a different distro version. And lldb-aarch64-ubuntu also uses its own 50 GB ccache. * tcwg-llvmbot_tk1-01.tcwglab hosts the following build bot: - silent-linaro-tk1-01 I changed the max cache size to 10 GB. There's not a lot of free space on the machine. * tcwg-llvmbot_tk1-03.tcwglab hosts the following build bot: - normal-linaro-tk1-02 I changed the max cache size to 20 GB. * tcwg-llvmbot_tk1-05.tcwglab hosts the following build bot: - silent-linaro-tk1-08 I changed the max cache size to 10 GB. * The following tcwg-llvmbot_tk1-* machines are currently unreachable so I couldn't examine them: - tcwg-llvmbot_tk1-02.tcwglab - tcwg-llvmbot_tk1-04.tcwglab * The following tcwg-llvmbot_tk1-* machines are running an llvmbot container but no builder container, so I didn't change their ccache configuration: - tcwg-llvmbot_tk1-06.tcwglab - tcwg-llvmbot_tk1-07.tcwglab - tcwg-llvmbot_tk1-08.tcwglab - tcwg-llvmbot_tk1-09.tcwglab * tcwg-jade-02 is a GNU builder, and from peeking into a few containers running build jobs I have the impression that it doesn't use ccache. Should I look into it? * Going through our ssh config file I didn't find these build bots that are listed at http://llvm.validation.linaro.org/ so I didn't check their ccache usage: - clang-arm64-windows-msvc-2stage - clang-arm64-windows-msvc - clang-arm64-windows-msvc-2stage - clang-arm64-windows-msvc - clang-native-arm-lnt-perf - clang-armv7-vfpv3-full-2stage - clang-thumbv7-full-2stage - libcxx aarch64 - libcxx aarch64 -fno-exceptions -- Thiago

3 years, 3 months

2
2
0 0

[ACTIVITY] Report for week #27

by Thiago Jung Bauermann

Hello, # [GNU-767] Support changing SVE vector length in remote debugging * Analysed and fixed a couple more regressions in my branch. The change to per-thread target descriptions in gdbserver (which was the more challenging part) is now free of regressions. Now cleaning up the part that actually deals with the SVE vector length change. # Linaro CI's GDB testsuite results * Increased ccache's max size on most build bots. Sent email to the linaro-toolchain list summarising the current status of their ccache setup. * Started looking more closely into how ccache configuration is put together in our container scripts to document it on the wiki (together with the steps I took to change the ccache max size). -- Thiago

3 years, 3 months

1
0
0 0

linaro-clang-armv8-lld-2stage has been red for a month

by Galina Kistanova

Hello Linaro Toolchain Working Group, linaro-clang-armv8-lld-2stage <https://lab.llvm.org/buildbot/#/workers/140> has been red since June 7th. Is anybody looking at the issue? Thanks Galina

3 years, 3 months

2
1
0 0

[weekly][linaro] report week ending 7 Jul

by Peter Maydell

Progress: (short week, 3 days) * UM-2 [QEMU upstream maintainership] - More code review, as softfreeze is now quite close. I think we've finally got there with the SME patchset (the remaining problems with v5 were very minor) * QEMU-422 [QEMU Arm Neoverse V1 vCPU for TCG] - QEMU-315 OS Lock/DoubleLock work now upstream -- PMM

3 years, 3 months

1
0
0 0

clang-armv7-vfpv3-full-2stage has been failing for more than 7 days and sends emails for each failed build

by Florian Hahn

Hi, It looks like https://lab.llvm.org/buildbot/#/builders/190 has been failing for the last week. It also sends out emails for each failed build, instead of for new failures only. The failure is below. It would be great if you could take a look and possibly adjust the configuration of the bot: [10/2380] Linking CXX shared library lib/clang/15.0.0/lib/linux/libclang_rt.scudo_standalone-armhf.so FAILED: lib/clang/15.0.0/lib/linux/libclang_rt.scudo_standalone-armhf.so : && /usr/local/bin/c++ -fPIC -fPIC -fvisibility-inlines-hidden -Werror=date-time -Werror=unguarded-availability-new -Wall -Wextra -Wno-unused-parameter -Wwrite-strings -Wcast-qual -Wmissing-field-initializers -pedantic -Wno-long-long -Wc++98-compat-extra-semi -Wimplicit-fallthrough -Wcovered-switch-default -Wno-noexcept-type -Wnon-virtual-dtor -Wdelete-non-virtual-dtor -Wsuggest-override -Wstring-conversion -Wmisleading-indentation -fdiagnostics-color -ffunction-sections -fdata-sections -Wall -std=c++14 -Wno-unused-parameter -O3 -DNDEBUG -Wl,-z,defs -Wl,-z,nodelete -Wl,-rpath-link,/home/tcwg-buildbot/worker/clang-armv7-vfpv3-full-2stage/stage1/./lib -march=armv7-a -mfloat-abi=hard -Wl,-z,defs,-z,now,-z,relro -ffunction-sections -fdata-sections -Wl,--gc-sections -nostdlib++ --unwindlib=none -pthread -shared -Wl,-soname,libclang_rt.scudo_standalone-armhf.so -o lib/clang/15.0.0/lib/linux/libclang_rt.scudo_standalone-armhf.so projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/common.cpp.o projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/crash_handler.cpp.o projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/platform_specific/common_posix.cpp.o projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/platform_specific/guarded_pool_allocator_posix.cpp.o projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/platform_specific/mutex_posix.cpp.o projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/platform_specific/utilities_posix.cpp.o projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/guarded_pool_allocator.cpp.o projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/stack_trace_compressor.cpp.o projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsanBacktraceLibc.armhf.dir/optional/backtrace_linux_libc.cpp.o projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsanSegvHandler.armhf.dir/optional/segv_handler_posix.cpp.o projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsanOptionsParser.armhf.dir/optional/options_parser.cpp.o projects/compiler-rt/lib/scudo/standalone/CMakeFiles/clang_rt.scudo_standalone-dynamic-armhf.dir/checksum.cpp.o projects/compiler-rt/lib/scudo/standalone/CMakeFiles/clang_rt.scudo_standalone-dynamic-armhf.dir/common.cpp.o projects/compiler-rt/lib/scudo/standalone/CMakeFiles/clang_rt.scudo_standalone-dynamic-armhf.dir/crc32_hw.cpp.o projects/compiler-rt/lib/scudo/standalone/CMakeFiles/clang_rt.scudo_standalone-dynamic-armhf.dir/flags_parser.cpp.o projects/compiler-rt/lib/scudo/standalone/CMakeFiles/clang_rt.scudo_standalone-dynamic-armhf.dir/flags.cpp.o projects/compiler-rt/lib/scudo/standalone/CMakeFiles/clang_rt.scudo_standalone-dynamic-armhf.dir/fuchsia.cpp.o projects/compiler-rt/lib/scudo/standalone/CMakeFiles/clang_rt.scudo_standalone-dynamic-armhf.dir/linux.cpp.o projects/compiler-rt/lib/scudo/standalone/CMakeFiles/clang_rt.scudo_standalone-dynamic-armhf.dir/release.cpp.o projects/compiler-rt/lib/scudo/standalone/CMakeFiles/clang_rt.scudo_standalone-dynamic-armhf.dir/report.cpp.o projects/compiler-rt/lib/scudo/standalone/CMakeFiles/clang_rt.scudo_standalone-dynamic-armhf.dir/string_utils.cpp.o projects/compiler-rt/lib/scudo/standalone/CMakeFiles/clang_rt.scudo_standalone-dynamic-armhf.dir/wrappers_c.cpp.o projects/compiler-rt/lib/scudo/standalone/CMakeFiles/clang_rt.scudo_standalone-dynamic-armhf.dir/wrappers_cpp.cpp.o -Wl,-rpath,"\$ORIGIN/../lib" && : /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/common.cpp.o:(.ARM.exidx.text._ZN8gwp_asan13ErrorToStringERKNS_5ErrorE+0x0): undefined reference to `__aeabi_unwind_cpp_pr0' /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/common.cpp.o:(.ARM.exidx.text._ZN8gwp_asan18AllocationMetadata16RecordAllocationEjj+0x0): undefined reference to `__aeabi_unwind_cpp_pr1' /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/common.cpp.o:(.ARM.exidx.text._ZN8gwp_asan18AllocationMetadata18RecordDeallocationEv+0x0): undefined reference to `__aeabi_unwind_cpp_pr1' /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/common.cpp.o:(.ARM.exidx.text._ZN8gwp_asan18AllocationMetadata12CallSiteInfo15RecordBacktraceEPFjPjjE+0x0): undefined reference to `__aeabi_unwind_cpp_pr1' /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/common.cpp.o:(.ARM.exidx.text._ZNK8gwp_asan14AllocatorState21maximumAllocationSizeEv+0x0): undefined reference to `__aeabi_unwind_cpp_pr0' /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/common.cpp.o:(.ARM.exidx.text._ZNK8gwp_asan14AllocatorState10slotToAddrEj+0x0): undefined reference to `__aeabi_unwind_cpp_pr0' /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/common.cpp.o:(.ARM.exidx.text._ZNK8gwp_asan14AllocatorState11isGuardPageEj+0x0): undefined reference to `__aeabi_unwind_cpp_pr0' /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/common.cpp.o:(.ARM.exidx.text._ZNK8gwp_asan14AllocatorState14getNearestSlotEj+0x0): undefined reference to `__aeabi_unwind_cpp_pr1' /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/crash_handler.cpp.o:(.ARM.exidx.text.__gwp_asan_error_is_mine+0x0): undefined reference to `__aeabi_unwind_cpp_pr0' /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/crash_handler.cpp.o:(.ARM.exidx.text.__gwp_asan_get_internal_crash_address+0x0): undefined reference to `__aeabi_unwind_cpp_pr0' /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/crash_handler.cpp.o:(.ARM.exidx.text.__gwp_asan_diagnose_error+0x0): undefined reference to `__aeabi_unwind_cpp_pr1' /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/crash_handler.cpp.o:(.ARM.exidx.text.__gwp_asan_get_metadata+0x0): undefined reference to `__aeabi_unwind_cpp_pr1' /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/crash_handler.cpp.o:(.ARM.exidx.text.__gwp_asan_get_allocation_address+0x0): undefined reference to `__aeabi_unwind_cpp_pr0' /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/crash_handler.cpp.o:(.ARM.exidx.text.__gwp_asan_get_allocation_size+0x0): undefined reference to `__aeabi_unwind_cpp_pr0' /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/crash_handler.cpp.o:(.ARM.exidx.text.__gwp_asan_get_allocation_thread_id+0x0): undefined reference to `__aeabi_unwind_cpp_pr0' /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/crash_handler.cpp.o:(.ARM.exidx.text.__gwp_asan_get_allocation_trace+0x0): undefined reference to `__aeabi_unwind_cpp_pr1' /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/crash_handler.cpp.o:(.ARM.exidx.text.__gwp_asan_is_deallocated+0x0): undefined reference to `__aeabi_unwind_cpp_pr0' /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/crash_handler.cpp.o:(.ARM.exidx.text.__gwp_asan_get_deallocation_thread_id+0x0): undefined reference to `__aeabi_unwind_cpp_pr0' /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/crash_handler.cpp.o:(.ARM.exidx.text.__gwp_asan_get_deallocation_trace+0x0): undefined reference to `__aeabi_unwind_cpp_pr1' /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/platform_specific/common_posix.cpp.o:(.ARM.exidx.text._ZN8gwp_asan11getThreadIDEv+0x0): undefined reference to `__aeabi_unwind_cpp_pr0' /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/platform_specific/guarded_pool_allocator_posix.cpp.o:(.ARM.exidx.text._ZN8gwp_asan20GuardedPoolAllocator8initPRNGEv+0x0): undefined reference to `__aeabi_unwind_cpp_pr1' /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/platform_specific/guarded_pool_allocator_posix.cpp.o:(.ARM.exidx.text._ZNK8gwp_asan20GuardedPoolAllocator3mapEjPKc+0x0): undefined reference to `__aeabi_unwind_cpp_pr1' /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/platform_specific/guarded_pool_allocator_posix.cpp.o:(.ARM.exidx.text._ZN8gwp_asan20GuardedPoolAllocator18reserveGuardedPoolEj+0x0): undefined reference to `__aeabi_unwind_cpp_pr1' /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/platform_specific/guarded_pool_allocator_posix.cpp.o:(.ARM.exidx.text._ZNK8gwp_asan20GuardedPoolAllocator21allocateInGuardedPoolEPvj+0x0): undefined reference to `__aeabi_unwind_cpp_pr0' /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/platform_specific/guarded_pool_allocator_posix.cpp.o:(.ARM.exidx.text._ZNK8gwp_asan20GuardedPoolAllocator23deallocateInGuardedPoolEPvj+0x0): undefined reference to `__aeabi_unwind_cpp_pr0' /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/platform_specific/guarded_pool_allocator_posix.cpp.o:(.ARM.exidx.text._ZN8gwp_asan20GuardedPoolAllocator19getPlatformPageSizeEv+0x0): undefined reference to `__aeabi_unwind_cpp_pr0' /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/platform_specific/guarded_pool_allocator_posix.cpp.o:(.ARM.exidx.text._ZN8gwp_asan20GuardedPoolAllocator13installAtForkEv+0x0): undefined reference to `__aeabi_unwind_cpp_pr0' /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/platform_specific/guarded_pool_allocator_posix.cpp.o:(.ARM.exidx.text._ZZN8gwp_asan20GuardedPoolAllocator13installAtForkEvEN3$_08__invokeEv+0x0): undefined reference to `__aeabi_unwind_cpp_pr0' /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/platform_specific/guarded_pool_allocator_posix.cpp.o:(.ARM.exidx.text._ZZN8gwp_asan20GuardedPoolAllocator13installAtForkEvEN3$_18__invokeEv+0x0): more undefined references to `__aeabi_unwind_cpp_pr0' follow /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/guarded_pool_allocator.cpp.o:(.ARM.exidx.text._ZN8gwp_asan20GuardedPoolAllocator7disableEv+0x0): undefined reference to `__aeabi_unwind_cpp_pr1' /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/guarded_pool_allocator.cpp.o:(.ARM.exidx.text._ZN8gwp_asan20GuardedPoolAllocator6enableEv+0x0): undefined reference to `__aeabi_unwind_cpp_pr1' /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/guarded_pool_allocator.cpp.o:(.ARM.exidx.text._ZN8gwp_asan20GuardedPoolAllocator7iterateEPvjPFvjjS1_ES1_+0x0): undefined reference to `__aeabi_unwind_cpp_pr0' /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/guarded_pool_allocator.cpp.o:(.ARM.exidx.text._ZN8gwp_asan20GuardedPoolAllocator8allocateEjj+0x0): undefined reference to `__aeabi_unwind_cpp_pr0' /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/guarded_pool_allocator.cpp.o:(.ARM.exidx.text._ZN8gwp_asan20GuardedPoolAllocator4stopEv+0x0): undefined reference to `__aeabi_unwind_cpp_pr0' /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/guarded_pool_allocator.cpp.o:(.ARM.exidx.text._ZN8gwp_asan20GuardedPoolAllocator10deallocateEPv+0x0): undefined reference to `__aeabi_unwind_cpp_pr0' /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/guarded_pool_allocator.cpp.o:(.ARM.exidx.text._ZN8gwp_asan20GuardedPoolAllocator7getSizeEPKv+0x0): undefined reference to `__aeabi_unwind_cpp_pr1' /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/stack_trace_compressor.cpp.o:(.ARM.exidx.text._ZN8gwp_asan11compression4packEPKjjPhj+0x0): undefined reference to `__aeabi_unwind_cpp_pr1' /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsan.armhf.dir/stack_trace_compressor.cpp.o:(.ARM.exidx.text._ZN8gwp_asan11compression6unpackEPKhjPjj+0x0): undefined reference to `__aeabi_unwind_cpp_pr0' /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsanBacktraceLibc.armhf.dir/optional/backtrace_linux_libc.cpp.o:(.ARM.exidx.text._ZN8gwp_asan9backtrace20getBacktraceFunctionEv+0x0): undefined reference to `__aeabi_unwind_cpp_pr0' /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsanBacktraceLibc.armhf.dir/optional/backtrace_linux_libc.cpp.o:(.ARM.exidx.text._ZN12_GLOBAL__N_19BacktraceEPjj+0x0): undefined reference to `__aeabi_unwind_cpp_pr0' /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsanBacktraceLibc.armhf.dir/optional/backtrace_linux_libc.cpp.o:(.ARM.exidx.text._ZN8gwp_asan9backtrace25getPrintBacktraceFunctionEv+0x0): undefined reference to `__aeabi_unwind_cpp_pr0' /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsanBacktraceLibc.armhf.dir/optional/backtrace_linux_libc.cpp.o:(.ARM.exidx.text._ZN12_GLOBAL__N_114PrintBacktraceEPjjPFvPKczE+0x0): undefined reference to `__aeabi_unwind_cpp_pr0' /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsanBacktraceLibc.armhf.dir/optional/backtrace_linux_libc.cpp.o:(.ARM.exidx.text._ZN8gwp_asan9backtrace24getSegvBacktraceFunctionEv+0x0): more undefined references to `__aeabi_unwind_cpp_pr0' follow /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsanSegvHandler.armhf.dir/optional/segv_handler_posix.cpp.o:(.ARM.exidx.text._ZN8gwp_asan12segv_handler21installSignalHandlersEPNS_20GuardedPoolAllocatorEPFvPKczEPFvPjjS6_EPFjS7_jPvE+0x0): undefined reference to `__aeabi_unwind_cpp_pr1' /usr/bin/ld: projects/compiler-rt/lib/gwp_asan/CMakeFiles/RTGwpAsanSegvHandler.armhf.dir/optional/segv_handler_posix.cpp.o:(.ARM.exidx.text._ZN12_GLOBAL__N_114sigSegvHandlerEiP9siginfo_tPv+0x0): undefined reference to `__aeabi_unwind_cpp_pr0' clang-13: error: linker command failed with exit code 1 (use -v to see invocation) [11/2380] Linking CXX static library lib/libLLVMObject.a Cheers, Florian

3 years, 3 months

2
3
0 0

[ACTIVITY] Report for week #26

by Thiago Jung Bauermann

Hello, # Linaro CI's GDB testsuite results * Implemented new version of change in the Abe shell script to correctly set auto-load-safe-path so that GDB can load libthread_db.so.1. Since GDB's configure script needs to be passed an argument containing literal dollar signs, use '@@' instead of '$' to avoid the shell misinterpreting it and substitute at the point of use. This version worked and was merged to the Abe repo. * Implemented and merged change in the Abe shell script to set variables pointing to language-specific target tools only if they are present in the path. This fixes Ada test failures in the GDB testsuite. * Implemented and merged improvement to our tcwg_gnu-build.sh script to allow specifying on the command line the Abe repo and branch to use. # [GNU-767] Support changing SVE vector length in remote debugging * Analysed and fixed a couple more regressions in my branch. -- Thiago

3 years, 3 months

1
0
0 0

[ACTIVITY] report week ending 1 Jul

by Peter Maydell

Progress: * UM-2 [QEMU upstream maintainership] - Code review (misc, plus another round on the SME patchset) - KVM Forum programme committee work * QEMU-422 [QEMU Arm Neoverse V1 vCPU for TCG] - Wrote and sent patches that deal with the last of the "small and uninteresting" dependencies of the V1 support epic (this one covers Feat_DoubleLock, which lets guest OSes suppress debug events as part of their power-down-a-CPU sequence) -- PMM

3 years, 3 months

1
0
0 0

qemu meeting status

by Richard Henderson

Hi guys. I just realized that today's meeting will be right in the middle of dinner plans. I'll organize better next week. Anyway, here's my status: - Fourth SME patch set -- parts merged, and some bugs fixed. - Base/arm-compat portion of semihosting rewrite now upstream. Target-specific bits for m68k, mips, nios2, xtensa outstanding. - Almost done with FEAT_HAFDBS (hardware access/dirty updates). Big changes to ptw.c to make that work: 50+ patches. The reorg should make FEAT_RME easier though. r~

3 years, 3 months

2
1
0 0

[ACTIVITY] Report for weeks #24 and #25

by Thiago Jung Bauermann

Hello, I just noticed that I didn't send a report for week #24. Sorry about that. For that reason, this report covers two weeks. # Linaro CI's GDB testsuite results * Submitted upstream patch fixing gdb_compile regexp to account for our GNATMAKE_FOR_TARGET value containing spaces. This should solve the Ada test failures in our CI. * Fixed the Abe shell script to correctly set auto-load-safe-path so that GDB can load libthread_db.so.1. Unfortunately the CI detected a problem with using the generated manifest to reproduce the toolchain build, so I'm back to the drawing board on this one. * Sent a Gerrit change request for the Abe script updating it to use release 12's branch and tag for GDB and gdbserver, and another one removing a workaround for a build problem fixed in GDB 9. * Sent a Gerrit change request for tcwg-dev-build.sh fixing a couple of issues I found when using it to build and test GDB. # [GNU-767] Support changing SVE vector length in remote debugging * Analysed and fixed a couple more regressions in my branch. # Misc * Attended a few online sessions from Linaro San Francisco Get Together. * Sent Gerrit change request updating the TCWG script that generates our SSH known_hosts file to include the Ed25519 host keys, which are now preferred in Ubuntu 22.04. * Was out one day due to “Corpus Christi” public holiday. -- Thiago

3 years, 3 months

1
0
0 0

[weekly][linaro] report week ending 24 Jun

by Peter Maydell

Progress: * UM-2 [QEMU upstream maintainership] - First week back after holiday: lots of catchup - Good progress with the code review queue, including getting rid of a few things that had been lurking in it for too long, and another pass through the latest SME series - KVM Forum programme committee work -- PMM

3 years, 3 months

1
0
0 0

[ACTIVITY] Report for week #23

by Thiago Jung Bauermann

Hello, # [GNU-767] Support changing SVE vector length in remote debugging * Debugged and fixed a few issues in my code where gdbserver was having trouble with setting the target description for new threads. Also fixed regressions in a couple more testcases. # Linaro CI's GDB testsuite results * Luis commented on IRC that the GDB testsuite results from the Linaro CI seemed a bit high with about 540 failures, so I set out to investigate. The two biggest sources of failures are: 1. Ada tests were failing because they can't build their test executables. This is expected because we don't have the Ada compiler in the CI, but normally these testcases would just bail out as unsupported. Found out that there was a regex in the GDB testsuite that was (IMHO) too strict for our particular setup and fixed it. 2. All CTF tests are failing. The compiler in the CI seems to be building test executables with CTF debug info, so we do seem to have a problem there. The CI's GDB is also not loading libthread_db.so because of a GDB security setting, so I fixed that as well and expect some more tests to pass now. I still haven't submitted my fixes for 1. to upstream and for the libthread_db.so.1 issue to our CI scripts because I'm still working with jenkins-scripts and Abe to reproduce the CI environment to verify the fixes. -- Thiago

3 years, 4 months

1
0
0 0

[ACTIVITY] report week ending 10 Jun

by Peter Maydell

Progress: * UM-2 [QEMU upstream maintainership] - This week was almost entirely code review and similar upstream tasks - managed to review all the preliminary parts of the SME patchset - reviewed several other refactoring series from rth - reviewed a big PS/2 keyboard emulation refactoring patchset - prep for KVM Forum program committee session * QEMU-422 [QEMU Arm Neoverse V1 vCPU for TCG] - FEAT_RASv1p1 and FEAT_DoubleFault now upstream -- PMM

3 years, 4 months

1
0
0 0

[ACTIVITY] Report for week #22

by Thiago Jung Bauermann

Hello, # [GNU-767] Support changing SVE vector length in remote debugging * Debugged and fixed issues in my code where gdbserver was in some cases trying to read inferior registers before aarch64_target was fully initialised, and also while the inferior thread was running. This improved reliability but there are still some testsuite regressions to look into. # Sourceware bug 28561 - [gdb/testsuite] Error due to not reading \r\n at end of mi prompt * Posted comment to the bug report summarising my current results. * Tried to reproduce the bug using the upstream v5.3 kernel (since I was able to see it with openSUSE Leap's v5.3 kernel), but failed. Still trying to understand what that implies. -- Thiago

3 years, 4 months

1
0
0 0

[TCWG CI] Regression caused by gcc: rs6000: Harden mma_init_builtins

by ci_notify＠linaro.org

[TCWG CI] Regression caused by gcc: rs6000: Harden mma_init_builtins: commit 6278065af07634278ba30029d92a82b089969baa Author: Peter Bergner <bergner(a)linux.ibm.com> rs6000: Harden mma_init_builtins Results regressed to # reset_artifacts: -10 # build_abe binutils: -9 # build_abe stage1: -5 # build_abe qemu: -2 # linux_n_obj: 33 # First few build errors in logs: # 00:03:13 cc1plus: fatal error: ./include/generated/utsrelease.h: No such file or directory # 00:03:13 make[2]: *** [scripts/gcc-plugins/latent_entropy_plugin.so] Error 1 # 00:03:13 cc1plus: fatal error: ./include/generated/utsrelease.h: No such file or directory # 00:03:13 make[2]: *** [scripts/gcc-plugins/stackleak_plugin.so] Error 1 # 00:03:13 cc1plus: fatal error: ./include/generated/utsrelease.h: No such file or directory # 00:03:13 make[2]: *** [scripts/gcc-plugins/randomize_layout_plugin.so] Error 1 # 00:03:13 make[1]: *** [scripts/gcc-plugins] Error 2 # 00:03:14 make: *** [scripts] Error 2 from # reset_artifacts: -10 # build_abe binutils: -9 # build_abe stage1: -5 # build_abe qemu: -2 # linux_n_obj: 31574 # linux build successful: all # linux boot successful: boot THIS IS THE END OF INTERESTING STUFF. BELOW ARE LINKS TO BUILDS, REPRODUCTION INSTRUCTIONS, AND THE RAW COMMIT. This commit has regressed these CI configurations: - tcwg_kernel/gnu-release-aarch64-next-allmodconfig First_bad build: https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-aarch64-next-a… Last_good build: https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-aarch64-next-a… Baseline build: https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-aarch64-next-a… Even more details: https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-aarch64-next-a… Reproduce builds: <cut> mkdir investigate-gcc-6278065af07634278ba30029d92a82b089969baa cd investigate-gcc-6278065af07634278ba30029d92a82b089969baa # Fetch scripts git clone https://git.linaro.org/toolchain/jenkins-scripts # Fetch manifests and test.sh script mkdir -p artifacts/manifests curl -o artifacts/manifests/build-baseline.sh https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-aarch64-next-a… --fail curl -o artifacts/manifests/build-parameters.sh https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-aarch64-next-a… --fail curl -o artifacts/test.sh https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-aarch64-next-a… --fail chmod +x artifacts/test.sh # Reproduce the baseline build (build all pre-requisites) ./jenkins-scripts/tcwg_kernel-build.sh @@ artifacts/manifests/build-baseline.sh # Save baseline build state (which is then restored in artifacts/test.sh) mkdir -p ./bisect rsync -a --del --delete-excluded --exclude /bisect/ --exclude /artifacts/ --exclude /gcc/ ./ ./bisect/baseline/ cd gcc # Reproduce first_bad build git checkout --detach 6278065af07634278ba30029d92a82b089969baa ../artifacts/test.sh # Reproduce last_good build git checkout --detach a5b5c7c2840ebb0aaa0d0f1e090fb2fc6942196d ../artifacts/test.sh cd .. </cut> Full commit (up to 1000 lines): <cut> commit 6278065af07634278ba30029d92a82b089969baa Author: Peter Bergner <bergner(a)linux.ibm.com> Date: Wed Jul 7 11:39:34 2021 -0500 rs6000: Harden mma_init_builtins The previous MMA patch added some fragile code to initialize its new built-ins. This patch hardens the initialization. 2021-07-07 Peter Bergner <bergner(a)linux.ibm.com> gcc/ * config/rs6000/rs6000-call.c (mma_init_builtins): Use VSX_BUILTIN_LXVP and VSX_BUILTIN_STXVP. --- gcc/config/rs6000/rs6000-call.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/gcc/config/rs6000/rs6000-call.c b/gcc/config/rs6000/rs6000-call.c index 6115e3b34d9..904e104c058 100644 --- a/gcc/config/rs6000/rs6000-call.c +++ b/gcc/config/rs6000/rs6000-call.c @@ -14293,7 +14293,8 @@ mma_init_builtins (void) /* Some MMA built-ins that are expanded into gimple are converted into internal MMA built-ins that are expanded into rtl. The internal built-in follows immediately after this built-in. */ - if (d[1].icode != CODE_FOR_nothing) + if (d->code != VSX_BUILTIN_LXVP + && d->code != VSX_BUILTIN_STXVP) { op[nopnds++] = void_type_node; icode = d[1].icode; </cut>

3 years, 4 months

3
2
0 0

[ACTIVITY] report week ending 31 May

by Peter Maydell

Progress (covers two half-weeks): * UM-2 [QEMU upstream maintainership] - investigating a reported bug with semihosting syscalls over gdbstub - reviewed a massive series from RTH refactoring our SVE code in preparation for handling SME * QEMU-422 [QEMU Arm Neoverse V1 vCPU for TCG] - looking at exactly what FEAT_RASv1p1 and FEAT_DoubleFault require of a minimal RAS implementation like QEMU's - sent a patch implementing FEAT_RASv1p1 (a no-op for QEMU) - sent a patch implementing FEAT_DoubleFault (turns out to be simpler than I initially feared it might be) -- PMM

3 years, 4 months

1
0
0 0

[TCWG CI] Regression caused by gcc: rs6000: MMA test case ICEs using -O3 [PR99842]

by ci_notify＠linaro.org

[TCWG CI] Regression caused by gcc: rs6000: MMA test case ICEs using -O3 [PR99842]: commit df4e0359dad239854af0ea9eacb8e7e3719557d0 Author: Peter Bergner <bergner(a)linux.ibm.com> rs6000: MMA test case ICEs using -O3 [PR99842] Results regressed to # reset_artifacts: -10 # build_abe binutils: -9 # build_abe stage1: -5 # build_abe qemu: -2 # linux_n_obj: 33 # First few build errors in logs: # 00:00:57 cc1plus: fatal error: ./include/generated/utsrelease.h: No such file or directory # 00:00:57 cc1plus: fatal error: ./include/generated/utsrelease.h: No such file or directory # 00:00:57 cc1plus: fatal error: ./include/generated/utsrelease.h: No such file or directory # 00:00:57 make[2]: *** [scripts/gcc-plugins/stackleak_plugin.so] Error 1 # 00:00:57 make[2]: *** [scripts/gcc-plugins/latent_entropy_plugin.so] Error 1 # 00:00:57 make[2]: *** [scripts/gcc-plugins/randomize_layout_plugin.so] Error 1 # 00:00:57 make[1]: *** [scripts/gcc-plugins] Error 2 # 00:00:59 make: *** [scripts] Error 2 from # reset_artifacts: -10 # build_abe binutils: -9 # build_abe stage1: -5 # build_abe qemu: -2 # linux_n_obj: 21071 # linux build successful: all THIS IS THE END OF INTERESTING STUFF. BELOW ARE LINKS TO BUILDS, REPRODUCTION INSTRUCTIONS, AND THE RAW COMMIT. This commit has regressed these CI configurations: - tcwg_kernel/gnu-release-aarch64-next-allyesconfig First_bad build: https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-aarch64-next-a… Last_good build: https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-aarch64-next-a… Baseline build: https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-aarch64-next-a… Even more details: https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-aarch64-next-a… Reproduce builds: <cut> mkdir investigate-gcc-df4e0359dad239854af0ea9eacb8e7e3719557d0 cd investigate-gcc-df4e0359dad239854af0ea9eacb8e7e3719557d0 # Fetch scripts git clone https://git.linaro.org/toolchain/jenkins-scripts # Fetch manifests and test.sh script mkdir -p artifacts/manifests curl -o artifacts/manifests/build-baseline.sh https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-aarch64-next-a… --fail curl -o artifacts/manifests/build-parameters.sh https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-aarch64-next-a… --fail curl -o artifacts/test.sh https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-aarch64-next-a… --fail chmod +x artifacts/test.sh # Reproduce the baseline build (build all pre-requisites) ./jenkins-scripts/tcwg_kernel-build.sh @@ artifacts/manifests/build-baseline.sh # Save baseline build state (which is then restored in artifacts/test.sh) mkdir -p ./bisect rsync -a --del --delete-excluded --exclude /bisect/ --exclude /artifacts/ --exclude /gcc/ ./ ./bisect/baseline/ cd gcc # Reproduce first_bad build git checkout --detach df4e0359dad239854af0ea9eacb8e7e3719557d0 ../artifacts/test.sh # Reproduce last_good build git checkout --detach e21e93407202e62a10c372595076c593c561bb11 ../artifacts/test.sh cd .. </cut> Full commit (up to 1000 lines): <cut> commit df4e0359dad239854af0ea9eacb8e7e3719557d0 Author: Peter Bergner <bergner(a)linux.ibm.com> Date: Sun May 30 22:45:55 2021 -0500 rs6000: MMA test case ICEs using -O3 [PR99842] The mma_assemble_input_operand predicate does not accept reg+reg indexed addresses which can lead to ICEs. The lxv and lxvp instructions have indexed forms (lxvx and lxvpx), so the simple solution is to just allow indexed addresses in the predicate. 2021-05-30 Peter Bergner <bergner(a)linux.ibm.com> gcc/ PR target/99842 * config/rs6000/predicates.md(mma_assemble_input_operand): Allow indexed form addresses. gcc/testsuite/ PR target/99842 * g++.target/powerpc/pr99842.C: New. --- gcc/config/rs6000/predicates.md | 3 +- gcc/testsuite/g++.target/powerpc/pr99842.C | 188 +++++++++++++++++++++++++++++ 2 files changed, 190 insertions(+), 1 deletion(-) diff --git a/gcc/config/rs6000/predicates.md b/gcc/config/rs6000/predicates.md index e21bc745f72..121cbf14810 100644 --- a/gcc/config/rs6000/predicates.md +++ b/gcc/config/rs6000/predicates.md @@ -1172,7 +1172,8 @@ (match_test "(mode == V16QImode && (vsx_register_operand (op, mode) || (MEM_P (op) - && quad_address_p (XEXP (op, 0), mode, false))))")) + && (indexed_or_indirect_address (XEXP (op, 0), mode) + || quad_address_p (XEXP (op, 0), mode, false)))))")) ;; Return 1 if this operand is valid for an MMA disassemble insn. (define_predicate "mma_disassemble_output_operand" diff --git a/gcc/testsuite/g++.target/powerpc/pr99842.C b/gcc/testsuite/g++.target/powerpc/pr99842.C new file mode 100644 index 00000000000..922450e2c21 --- /dev/null +++ b/gcc/testsuite/g++.target/powerpc/pr99842.C @@ -0,0 +1,188 @@ +/* PR target/99842 */ +/* { dg-require-effective-target power10_ok } */ +/* { dg-options "-O3 -mdejagnu-cpu=power10 -Wno-return-type" } */ + +/* Verify we do not ICE on the following noisy creduced test case. */ + +enum { a, b, c, d }; +template <typename> struct e; +template <typename g, typename h, typename k> struct e<g(h, k)> { + typedef h f; +}; +template <typename> struct ac; +template <typename ab> struct ac<const ab> : ac<ab> {}; +template <typename> struct l; +template <typename, int, int m, int = 0, int = a, int = m> class n; +template <typename> class o; +template <typename, typename, typename> class ag; +template <typename, typename, int = c> class af; +template <typename> struct ad; +template <typename ab> struct an { + typedef n<typename ab ::ah, ac<ab>::ai, ac<ab>::aj> f; +}; +template <typename al> struct am { typedef o<al> f; }; +template <typename al, typename = typename ac<al>::ao, + typename = typename ac<al>::av> +struct ak; +template <typename al, typename ao> struct ak<al, ao, int> { + typedef typename am<al>::f f; +}; +template <typename, typename, typename> struct aq; +template <typename ar, typename as> struct aq<ar, ar, as> { typedef ar at; }; +template <typename ap> ap bf(const typename ad<ap>::f *); +template <typename ap, int> ap aw(typename ad<ap>::f *ax) { return bf<ap>(ax); } +typedef __attribute__((altivec(vector__))) double au; +template <> struct ad<au> { typedef double f; }; +template <> au bf(const double *ax) { return __builtin_vec_vsx_ld(0, ax); } +template <typename> struct az {}; +template <typename al> class o : public l<al> { +public: + typedef typename ac<al>::ah ah; + template <typename ay> al &operator+=(const o<ay> &); +}; +template <typename> struct l {}; +template <typename ba, typename bb, int bd> struct ac<af<ba, bb, bd>> { + typedef typename ba::ah ah; + enum { ai, aj }; +}; +template <typename, typename, int bd> +class af + : public ak< + af<ag<int, const n<double, -1, -1, 3>, const n<double, -1, -1, 3>>, + n<double, -1, 1, 3>, bd>, + int, int>::f {}; +template <typename, typename, typename> struct be; +template <typename bj, typename bg, typename g> void bi(bj, bg bm, g) { + typename an<bg>::f bk(bm); +} +template <typename bj, typename bg, typename g> void bl(bj, bg bm, g bp) { + be<bj, bg, g>::bn(a, bm, bp); +} +template <typename, typename, typename, typename> struct bo; +class bs { +public: + bs(double *, int); + double &operator()(int, int) { return bq[br]; } + template <typename bw, int> bw bt(int i, int j) { + double &bu = operator()(i, j); + return aw<bw, b>(&bu); + } + double *bq; + int br; +}; +class ca : public bs { +public: + ca(double *by, int bz) : bs(by, bz) {} +}; +template <typename al> class ce : public am<al>::f { +protected: + template <typename ay> void cb(l<ay>) { + af<ag<int, const n<double, -1, -1, 3>, const n<double, -1, -1, 3>>, + n<double, -1, 1, 3>> + cc; + bl(0, cc, az<typename ay::ah>()); + } + template <typename> void ch(long); + template <typename ay> void ch(l<ay> cf) { cb(cf); } +}; +template <typename cg, int aa, int m, int cl, int ci, int cj> +struct ac<n<cg, aa, m, cl, ci, cj>> { + typedef cg ah; + typedef int av; +}; +template <typename cg, int, int m, int, int, int> +class n : public ce<n<cg, m, c>> { +public: + template <typename ab> n(ab p) { n::template ch<ab>(p); } +}; +template <typename bc, typename ba, typename bb> struct ac<ag<bc, ba, bb>> { + typedef ba ao; + typedef typename e<bc(typename ba::ah, typename bb::ah)>::f ah; + typedef typename aq<typename ac<ba>::av, typename ac<bb>::av, bc>::at av; +}; +template <typename> class cm; +template <typename, typename r, typename cs> +class ag + : public cm<typename aq<typename ac<r>::av, typename ac<cs>::av, int>::at> { +}; +template <typename> +class cm : public ak<ag<int, n<double, 1, 1>, n<double, 1, 1>>>::f {}; +template <typename al> +template <typename ay> +al &o<al>::operator+=(const o<ay> &) { + af<ag<int, const n<double, -1, -1, 3>, const n<double, -1, -1, 3>>, + n<double, -1, 1, 3>> + co; + bi(0, co, int()); +} +enum { cp }; +template <int> struct cq; +template <typename> struct cr { + enum { q }; + enum { ae = cq<q>::at }; +}; +template <> struct cq<cp> { + enum { at = d }; +}; +struct t { + template <typename ba, typename bb, typename s> static void bn(ba, bb, s) { + typedef typename bb::ah x; + x u; + bo<long, ca, x, ca>::bn(0, 0, ca(0, 0), ca(&u, 1), 0, 0, 0); + } +}; +template <typename, typename bb, int = cr<bb>::ae> struct cu; +template <typename cd, typename ba, typename bb, int ct, typename ah> +struct be<cd, af<ba, bb, ct>, az<ah>> { + static void bn(cd, af<ba, bb> bm, az<ah>) { + ag<int, const n<double, -1, -1, 3>, const n<double, -1, -1, 3>> da; + cu<ba, bb>::cv(c, da, bm); + } +}; +template <typename al> struct cw { + template <typename bj> + static void + cv(bj, ag<int, const n<double, -1, -1, 3>, const n<double, -1, -1, 3>>, + n<double, -1, 1, 3> bx) { + double alpha; + ag<int, const n<double, -1, -1, 3>, const n<double, -1, -1, 3>> bh; + al::cx(c, bh, bx, alpha); + } +}; +template <typename ba, typename bb> struct cu<ba, bb, d> : cw<cu<ba, bb>> { + template <typename s> static void cx(s, ba, bb bx, typename af<ba, bb>::ah) { + ba cz; + t::bn(cz, bx, c); + } +}; +template <typename dj, typename, bool> +void db(__vector_quad *, __vector_pair &, dj); +template <typename, typename, typename, typename, typename, typename, int> +void dc(ca alhs) { + typedef au dj; + typedef au dd; + ca bh(alhs); + enum { de }; + __vector_quad df, dg; + int j; + dd v; + __vector_pair dh; + __builtin_mma_assemble_pair( + &dh, (__attribute__((altivec(vector__))) char)bh.bt<dj, de>(0, j), + (__attribute__((altivec(vector__))) char)bh.bt<dj, de>(0, j)); + db<dj, dd, true>(&df, dh, v); + __vector_pair di; + __builtin_mma_assemble_pair( + &di, (__attribute__((altivec(vector__))) char)bh.bt<dj, de>(0, j), + (__attribute__((altivec(vector__))) char)bh.bt<dj, de>(0, j)); + db<dj, dd, true>(&dg, di, v); +} +template <typename bv, typename w, typename cy> struct bo<bv, w, double, cy> { + static void bn(bv, bv, w bh, cy, double, bv, double) { + dc<bv, double, w, double, cy, double, d>(bh); + } +}; +void dm() { + n<double, 1, 1> dk(1), y(0); + y += dk; +} </cut>

3 years, 4 months

3
2
0 0

[ACTIVITY] Report for week #21

by Thiago Jung Bauermann

Hello, # [GNU-767] Support changing SVE vector length in remote debugging * Found out that one issue I was having with gdbserver was caused by an incompatibility it has with zsh (sourceware bug 26116). * Fixed a gdbserver crash in my code where a register set was NULL in the target description. * Now working on an issue where the target description says SVE isn't supported, but the regsets information says they are. This is caused by my code sometimes moving the first ptrace call to get the inferior registers to a time before it is properly stopped. # Sourceware bug 28561 - [gdb/testsuite] Error due to not reading \r\n at end of mi prompt * Set up a few containers and KVM guests to attempt to reproduce this bug on different environments. Reproduced it successfully on an openSUSE Leap 15.3 guest, as well as Ubuntu 20.04 and 22.04 containers in said guest. I wasn't able to reproduce on Ubuntu 20.04 nor 22.04 guests. Suspecting it's a kernel issue where the fix was backported to the Ubuntu kernels. -- Thiago

3 years, 4 months

1
0
0 0

[TCWG CI] Regression caused by gcc: c++: designators in single-element init lists

by ci_notify＠linaro.org

[TCWG CI] Regression caused by gcc: c++: designators in single-element init lists: commit 885035eacb36b5bf1aa3b0d05f675ab89665d7be Author: Jason Merrill <jason(a)redhat.com> c++: designators in single-element init lists Results regressed to # reset_artifacts: -10 # build_abe binutils: -9 # build_abe stage1: -5 # build_abe qemu: -2 # linux_n_obj: 33 # First few build errors in logs: # 00:00:55 cc1plus: fatal error: ./include/generated/utsrelease.h: No such file or directory # 00:00:55 cc1plus: fatal error: ./include/generated/utsrelease.h: No such file or directory # 00:00:55 cc1plus: fatal error: ./include/generated/utsrelease.h: No such file or directory # 00:00:56 make[2]: *** [scripts/gcc-plugins/latent_entropy_plugin.so] Error 1 # 00:00:56 make[2]: *** [scripts/gcc-plugins/stackleak_plugin.so] Error 1 # 00:00:56 make[2]: *** [scripts/gcc-plugins/randomize_layout_plugin.so] Error 1 # 00:00:56 make[1]: *** [scripts/gcc-plugins] Error 2 # 00:00:57 make: *** [scripts] Error 2 from # reset_artifacts: -10 # build_abe binutils: -9 # build_abe stage1: -5 # build_abe qemu: -2 # linux_n_obj: 21071 # linux build successful: all THIS IS THE END OF INTERESTING STUFF. BELOW ARE LINKS TO BUILDS, REPRODUCTION INSTRUCTIONS, AND THE RAW COMMIT. This commit has regressed these CI configurations: - tcwg_kernel/gnu-release-aarch64-next-allyesconfig First_bad build: https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-aarch64-next-a… Last_good build: https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-aarch64-next-a… Baseline build: https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-aarch64-next-a… Even more details: https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-aarch64-next-a… Reproduce builds: <cut> mkdir investigate-gcc-885035eacb36b5bf1aa3b0d05f675ab89665d7be cd investigate-gcc-885035eacb36b5bf1aa3b0d05f675ab89665d7be # Fetch scripts git clone https://git.linaro.org/toolchain/jenkins-scripts # Fetch manifests and test.sh script mkdir -p artifacts/manifests curl -o artifacts/manifests/build-baseline.sh https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-aarch64-next-a… --fail curl -o artifacts/manifests/build-parameters.sh https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-aarch64-next-a… --fail curl -o artifacts/test.sh https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-aarch64-next-a… --fail chmod +x artifacts/test.sh # Reproduce the baseline build (build all pre-requisites) ./jenkins-scripts/tcwg_kernel-build.sh @@ artifacts/manifests/build-baseline.sh # Save baseline build state (which is then restored in artifacts/test.sh) mkdir -p ./bisect rsync -a --del --delete-excluded --exclude /bisect/ --exclude /artifacts/ --exclude /gcc/ ./ ./bisect/baseline/ cd gcc # Reproduce first_bad build git checkout --detach 885035eacb36b5bf1aa3b0d05f675ab89665d7be ../artifacts/test.sh # Reproduce last_good build git checkout --detach 84fd1b5dff70cd74aee7e8b18f66959d8b8e1ce7 ../artifacts/test.sh cd .. </cut> Full commit (up to 1000 lines): <cut> commit 885035eacb36b5bf1aa3b0d05f675ab89665d7be Author: Jason Merrill <jason(a)redhat.com> Date: Wed May 19 21:13:43 2021 -0400 c++: designators in single-element init lists While looking at PR100489, it occurred to me that places that currently use an initializer-list with a single element to initialize an object of the same type shouldn't do that if the element has a designator. gcc/cp/ChangeLog: * call.c (reference_binding): Check for designator. (implicit_conversion_1, build_special_member_call): Likewise. * decl.c (reshape_init_r): Likewise. * pt.c (do_class_deduction): Likewise. * typeck2.c (digest_init_r): Likewise. gcc/testsuite/ChangeLog: * g++.dg/cpp2a/desig19.C: New test. --- gcc/cp/call.c | 5 ++++- gcc/cp/decl.c | 2 ++ gcc/cp/pt.c | 3 ++- gcc/cp/typeck2.c | 1 + gcc/testsuite/g++.dg/cpp2a/desig19.C | 33 +++++++++++++++++++++++++++++++++ 5 files changed, 42 insertions(+), 2 deletions(-) diff --git a/gcc/cp/call.c b/gcc/cp/call.c index fa770f244cb..cfccf273632 100644 --- a/gcc/cp/call.c +++ b/gcc/cp/call.c @@ -1731,7 +1731,8 @@ reference_binding (tree rto, tree rfrom, tree expr, bool c_cast_p, int flags, because A[] and A[2] are reference-related. But we don't do it because grok_reference_init has deduced the array size (to 1), and A[1] and A[2] aren't reference-related. */ - if (CONSTRUCTOR_NELTS (expr) == 1) + if (CONSTRUCTOR_NELTS (expr) == 1 + && !CONSTRUCTOR_IS_DESIGNATED_INIT (expr)) { tree elt = CONSTRUCTOR_ELT (expr, 0)->value; if (error_operand_p (elt)) @@ -2095,6 +2096,7 @@ implicit_conversion_1 (tree to, tree from, tree expr, bool c_cast_p, { if (BRACE_ENCLOSED_INITIALIZER_P (expr) && CONSTRUCTOR_NELTS (expr) == 1 + && !CONSTRUCTOR_IS_DESIGNATED_INIT (expr) && !is_list_ctor (cand->fn)) { /* "If C is not an initializer-list constructor and the @@ -10199,6 +10201,7 @@ build_special_member_call (tree instance, tree name, vec<tree, va_gc> **args, if (BRACE_ENCLOSED_INITIALIZER_P (arg) && !TYPE_HAS_LIST_CTOR (class_type) + && !CONSTRUCTOR_IS_DESIGNATED_INIT (arg) && CONSTRUCTOR_NELTS (arg) == 1) arg = CONSTRUCTOR_ELT (arg, 0)->value; diff --git a/gcc/cp/decl.c b/gcc/cp/decl.c index 6107b553cb4..e7268d5ad18 100644 --- a/gcc/cp/decl.c +++ b/gcc/cp/decl.c @@ -6650,6 +6650,8 @@ reshape_init_r (tree type, reshape_iter *d, tree first_initializer_p, initialized from that element." Even if T is an aggregate. */ if (cxx_dialect >= cxx11 && (CLASS_TYPE_P (type) || VECTOR_TYPE_P (type)) && first_initializer_p + /* But not if it's a designated init. */ + && !d->cur->index && d->end - d->cur == 1 && reference_related_p (type, TREE_TYPE (init))) { diff --git a/gcc/cp/pt.c b/gcc/cp/pt.c index 3d1787b6fc3..99a9ee5ade2 100644 --- a/gcc/cp/pt.c +++ b/gcc/cp/pt.c @@ -29326,7 +29326,8 @@ do_class_deduction (tree ptype, tree tmpl, tree init, { list_init_p = true; try_list_ctor = TYPE_HAS_LIST_CTOR (type); - if (try_list_ctor && CONSTRUCTOR_NELTS (init) == 1) + if (try_list_ctor && CONSTRUCTOR_NELTS (init) == 1 + && !CONSTRUCTOR_IS_DESIGNATED_INIT (init)) { /* As an exception, the first phase in 16.3.1.7 (considering the initializer list as a single argument) is omitted if the diff --git a/gcc/cp/typeck2.c b/gcc/cp/typeck2.c index 5a7219dec65..6679e247816 100644 --- a/gcc/cp/typeck2.c +++ b/gcc/cp/typeck2.c @@ -1183,6 +1183,7 @@ digest_init_r (tree type, tree init, int nested, int flags, the object is initialized from that element." */ if (cxx_dialect >= cxx11 && BRACE_ENCLOSED_INITIALIZER_P (stripped_init) + && !CONSTRUCTOR_IS_DESIGNATED_INIT (stripped_init) && CONSTRUCTOR_NELTS (stripped_init) == 1 && ((CLASS_TYPE_P (type) && !CLASSTYPE_NON_AGGREGATE (type)) || VECTOR_TYPE_P (type))) diff --git a/gcc/testsuite/g++.dg/cpp2a/desig19.C b/gcc/testsuite/g++.dg/cpp2a/desig19.C new file mode 100644 index 00000000000..3321da85802 --- /dev/null +++ b/gcc/testsuite/g++.dg/cpp2a/desig19.C @@ -0,0 +1,33 @@ +// { dg-do compile { target c++11 } } +// { dg-options "" } + +struct A +{ + int i; + constexpr operator int() { return 42; } +}; + +#define SA(X) static_assert ((X),#X) +constexpr A a1 { A() }; +SA(a1.i == 0); +constexpr A a2 { i: A() }; +SA(a2.i == 42); +#if __cpp_constexpr >= 201304L +constexpr int f3 () { A const &r { A() }; return r.i; } +SA(f3() == 0); +constexpr int f4 () { A const &r { i: A() }; return r.i; } +SA(f4() == 42); +constexpr int f5 () { A ar[1]{{ A() }}; return ar[0].i; } +SA(f5() == 0); +constexpr int f5a () { A ar[1]{{ i: A() }}; return ar[0].i; } +SA(f5a() == 42); +#if __cpp_constexpr >= 201907L +constexpr int f6 () { A* p = new A{A()}; int i = p->i; delete p; return i; } +SA(f6() == 0); +constexpr int f6a () { A* p = new A{i:A()}; int i = p->i; delete p; return i; } +SA(f6a() == 42); +#endif +#endif +constexpr int f7 (A a) { return a.i; } +SA(f7({A()}) == 0); +SA(f7({i:A()}) == 42); </cut>

3 years, 4 months

1
0
0 0

[ACTIVITY] week ending May. 29 2022

by Alex Bennée

Project Stratos =============== - posted [RFC PATCH] xen/arm: p2m don't fall over on FEAT_LPA enabled hw Message-Id: <20220426160548.2020794-1-alex.bennee(a)linaro.org> - posted [PATCH v2] xen/arm: p2m don't fall over on FEAT_LPA enabled hw Message-Id: <20220428103410.2723837-1-alex.bennee(a)linaro.org> - many discussions and plans at KWG sprint - posted Remaining Xen enabling work for rust-vmm Message-Id: <87pmk472ii.fsf(a)linaro.org> - posted vhost-device outstanding tasks Message-Id: <87zgj87alq.fsf(a)linaro.org> vhost-device maintainer effort ([UM-196]) - adopted [PATCH 0/2] virtio: Add vhost-user-gpio device's support Message-Id: <5f560cab92d0d789b1c94295ec74b9952907d69d.1641987128.git.viresh.kumar(a)linaro.org> - posted [RFC PATCH v2] tests/qtest: attempt to enable tests for virtio-gpio (!working) Message-Id: <20220408155704.2777166-1-alex.bennee(a)linaro.org> - posted [PATCH v2 00/15] virtio-gpio and various virtio cleanups Message-Id: <20220524154056.2896913-14-alex.bennee(a)linaro.org> QEMU Upstream Work ([UM-2]) =========================== - posted [PATCH v1 00/15] testing, docs, tracepoints and cputlb hacks Message-Id: <20220408164742.2844631-1-alex.bennee(a)linaro.org> - posted [RFC PATCH] target/i386: avoid copying junk to extended ZMMReg fields Message-Id: <20220411145609.3932882-1-alex.bennee(a)linaro.org> - posted [RFC PATCH] gdb/gic: expose cpu_index via MxTxAttrs Message-Id: <20220412104519.201655-1-alex.bennee(a)linaro.org> - posted [RFC PATCH] tests/guest-debug: better handle gdb crashes Message-Id: <20220413121115.639610-1-alex.bennee(a)linaro.org> - posted [PATCH v2 01/15] contrib/vhost-user-blk: fix 32 bit build and enable Message-Id: <9c313696-6626-0b9e-0625-394fb2b38e21(a)redhat.com> - posted [PATCH v1 00/33] testing/next (gitlab, junit, lcitool, x-compile) Message-Id: <20220527153603.887929-1-alex.bennee(a)linaro.org> [UM-2] <https://linaro.atlassian.net/browse/UM-2> Completed Reviews [7/7] ======================= [PATCH for-7.1 v2 00/39] Logging cleanup and per-thread logfiles Message-Id: <20220326132534.543738-1-richard.henderson(a)linaro.org> [PATCH 00/17] tests/docker and tests/tcg cleanup and diet Message-Id: <20220401141326.1244422-1-pbonzini(a)redhat.com> [PATCH v1] virtio/virtio.c: include virtio prefix in error message Message-Id: <20220414112902.41390-1-codeguy.moteen(a)gmail.com> [PATCH v3 00/39] Logging cleanup and per-thread logfiles Message-Id: <20220417183019.755276-1-richard.henderson(a)linaro.org> [PATCH v3 00/60] target/arm: Cleanups, new features, new cpus Message-Id: <20220417174426.711829-1-richard.henderson(a)linaro.org> - or at least a chunk of it [PATCH] Remove Ubuntu 18.04 support from the repository Message-Id: <20220510195612.677494-1-thuth(a)redhat.com> [PATCH 00/16] Cross compilation of embedded firmware Message-Id: <20220517092616.1272238-1-pbonzini(a)redhat.com> Current Review Queue ==================== TODO [PATCH v4 0/9] Record/replay refactoring and stuff Message-Id: <165364836050.688121.11980415709895333098.stgit@pasha-ThinkPad-X280> ======================================================================================================================================= TODO [PATCH v11 0/2] hw/arm/virt: CXL 2.0 emulation support Message-Id: <20220520163732.27545-3-Jonathan.Cameron(a)huawei.com> =========================================================================================================================== TODO [PATCH v2 0/7] target/arm: SME prep patches Message-Id: <20220517054850.177016-1-richard.henderson(a)linaro.org> ================================================================================================================== -- Alex Bennée

3 years, 4 months

1
0
0 0

[TCWG CI] Regression caused by gcc: Daily bump.

by ci_notify＠linaro.org

[TCWG CI] Regression caused by gcc: Daily bump.: commit b75978d14fc35981ffd8bf060ee52300db4dae50 Author: GCC Administrator <gccadmin(a)gcc.gnu.org> Daily bump. Results regressed to # reset_artifacts: -10 # build_abe binutils: -9 # build_abe stage1: -5 # build_abe qemu: -2 # linux_n_obj: 33 # First few build errors in logs: # 00:00:52 cc1plus: fatal error: ./include/generated/utsrelease.h: No such file or directory # 00:00:52 cc1plus: fatal error: ./include/generated/utsrelease.h: No such file or directory # 00:00:53 make[2]: *** [scripts/gcc-plugins/latent_entropy_plugin.so] Error 1 # 00:00:53 make[2]: *** [scripts/gcc-plugins/randomize_layout_plugin.so] Error 1 # 00:00:53 make[1]: *** [scripts/gcc-plugins] Error 2 # 00:00:53 make: *** [scripts] Error 2 from # reset_artifacts: -10 # build_abe binutils: -9 # build_abe stage1: -5 # build_abe qemu: -2 # linux_n_obj: 22769 THIS IS THE END OF INTERESTING STUFF. BELOW ARE LINKS TO BUILDS, REPRODUCTION INSTRUCTIONS, AND THE RAW COMMIT. This commit has regressed these CI configurations: - tcwg_kernel/gnu-release-arm-next-allmodconfig First_bad build: https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-arm-next-allmo… Last_good build: https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-arm-next-allmo… Baseline build: https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-arm-next-allmo… Even more details: https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-arm-next-allmo… Reproduce builds: <cut> mkdir investigate-gcc-b75978d14fc35981ffd8bf060ee52300db4dae50 cd investigate-gcc-b75978d14fc35981ffd8bf060ee52300db4dae50 # Fetch scripts git clone https://git.linaro.org/toolchain/jenkins-scripts # Fetch manifests and test.sh script mkdir -p artifacts/manifests curl -o artifacts/manifests/build-baseline.sh https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-arm-next-allmo… --fail curl -o artifacts/manifests/build-parameters.sh https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-arm-next-allmo… --fail curl -o artifacts/test.sh https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-arm-next-allmo… --fail chmod +x artifacts/test.sh # Reproduce the baseline build (build all pre-requisites) ./jenkins-scripts/tcwg_kernel-build.sh @@ artifacts/manifests/build-baseline.sh # Save baseline build state (which is then restored in artifacts/test.sh) mkdir -p ./bisect rsync -a --del --delete-excluded --exclude /bisect/ --exclude /artifacts/ --exclude /gcc/ ./ ./bisect/baseline/ cd gcc # Reproduce first_bad build git checkout --detach b75978d14fc35981ffd8bf060ee52300db4dae50 ../artifacts/test.sh # Reproduce last_good build git checkout --detach ac0bc21bd634a334ba8f323c39a11f01dfdc2aae ../artifacts/test.sh cd .. </cut> Full commit (up to 1000 lines): <cut> commit b75978d14fc35981ffd8bf060ee52300db4dae50 Author: GCC Administrator <gccadmin(a)gcc.gnu.org> Date: Wed Jun 2 00:16:43 2021 +0000 Daily bump. --- gcc/ChangeLog | 132 ++++++++++++++++++++++++++++++++++++++++++++++++ gcc/DATESTAMP | 2 +- gcc/c-family/ChangeLog | 9 ++++ gcc/cp/ChangeLog | 19 +++++++ gcc/fortran/ChangeLog | 38 ++++++++++++++ gcc/testsuite/ChangeLog | 61 ++++++++++++++++++++++ libstdc++-v3/ChangeLog | 38 ++++++++++++++ 7 files changed, 298 insertions(+), 1 deletion(-) diff --git a/gcc/ChangeLog b/gcc/ChangeLog index e1ae7fa23f0..ef69e6a04b3 100644 --- a/gcc/ChangeLog +++ b/gcc/ChangeLog @@ -1,3 +1,135 @@ +2021-06-01 Andrew Pinski <apinski(a)marvell.com> + + PR tree-optimization/25290 + * tree-ssa-phiopt.c (match_simplify_replacement): + New function. + (tree_ssa_phiopt_worker): Use match_simplify_replacement. + (two_value_replacement): Change the comment about + conditional_replacement. + (conditional_replacement): Delete. + +2021-06-01 Andrew Pinski <apinski(a)marvell.com> + + PR tree-optimization/95481 + * tree-tailcall.c (find_tail_calls): Handle empty typed + return decls. + +2021-06-01 Andrew Pinski <apinski(a)marvell.com> + + * gimplify.c (zero_sized_field_decl): Delete + (zero_sized_type): Delete + (gimplify_init_ctor_eval): Use is_empty_type instead + of zero_sized_field_decl. + (gimplify_modify_expr): Use is_empty_type instead of + zero_sized_type. + +2021-06-01 Jason Merrill <jason(a)redhat.com> + + PR c++/91859 + * tree.h (CALL_FROM_NEW_OR_DELETE_P): Adjust comment. + +2021-06-01 Jason Merrill <jason(a)redhat.com> + + PR c++/94492 + * diagnostic.h (warning_enabled_at): Declare. + * diagnostic.c (diagnostic_enabled): Factor out from... + (diagnostic_report_diagnostic): ...here. + (warning_enabled_at): New. + +2021-06-01 Aldy Hernandez <aldyh(a)redhat.com> + + * gimple-ssa-evrp.c: Enable exporting of global ranges. + +2021-06-01 Martin Liska <mliska(a)suse.cz> + + PR other/100826 + * doc/invoke.texi: Mention that -fgcse-after-reload + is enabled with -O3. + +2021-06-01 liuhongt <hongtao.liu(a)intel.com> + + PR tree-optimization/98365 + * tree-if-conv.c (strip_nop_cond_scalar_reduction): New function. + (is_cond_scalar_reduction): Handle nop_expr in cond scalar reduction. + (convert_scalar_cond_reduction): Ditto. + (predicate_scalar_phi): Ditto. + +2021-06-01 Andrew MacLeod <amacleod(a)redhat.com> + + PR tree-optimization/100781 + * gimple-range-cache.cc (ranger_cache::ranger_cache): Enable new + value calculation by default. + (ranger_cache::enable_new_values): New. + (ranger_cache::disable_new_values): New. + (ranger_cache::push_poor_value): Check if new values are allowed. + * gimple-range-cache.h (class ranger_cache): New member/methods. + * gimple-range.cc (gimple_ranger::range_of_expr): Check for debug + statement, and disable/renable new value calculation. + +2021-06-01 Andrew MacLeod <amacleod(a)redhat.com> + + * gimple-range-cache.cc (ranger_cache::ssa_range_in_bb): Delete. + (ranger_cache::range_of_def): New. + (ranger_cache::entry_range): New. + (ranger_cache::exit_range): New. + (ranger_cache::range_of_expr): Adjust. + (ranger_cache::range_on_edge): Adjust. + (ranger_cache::propagate_cache): Call exit_range directly. + * gimple-range-cache.h (class ranger_cache): Adjust. + +2021-06-01 Andrew MacLeod <amacleod(a)redhat.com> + + * gimple-range-cache.cc (ranger_cache::ranger_cache): Adjust for + gori_compute being a member rather than base class. + dervied call to member call. + (ranger_cache::dump): No longer dump gori_map. + (ranger_cache::dump_bb): New. + (ranger_cache::get_non_stale_global_range): Adjust for gori_compute + being a member rather than base class. + (ranger_cache::set_global_range): Ditto. + (ranger_cache::ssa_range_in_bb): Ditto. + (ranger_cache::range_of_expr): New. + (ranger_cache::range_on_edge): New. + (ranger_cache::block_range): Adjust for gori_computes. Debug changes. + (ranger_cache::propagate_cache): Adjust debugging output. + (ranger_cache::fill_block_cache): Adjust for gori_computes. Debug + output changes. + * gimple-range-cache.h (class ranger_cache): Make gori_compute a + member, and inherit from range_query instead. + (ranger_cache::dump_bb): New. split from dump. + * gimple-range-gori.cc (gori_compute::ssa_range_in_bb): Delete. + (gori_compute::expr_range_at_stmt): Delete. + (gori_compute::compute_name_range_op): Delete. + (gori_compute::compute_operand_range_switch): Add fur_source. + (gori_compute::compute_operand_range): Add fur_source param, inline + old compute_name_range_op and optimize_logical_operands. + (struct tf_range): Delete. + (gori_compute::logical_combine): Adjust + (gori_compute::optimize_logical_operands): Delete. + (gori_compute::compute_logical_operands_in_chain): Delete. + (gori_compute::compute_logical_operands): Adjust. + (gori_compute::compute_operand1_range): Adjust to fur_source. + (gori_compute::compute_operand2_range): Ditto. + (gori_compute::compute_operand1_and_operand2_range): Ditto. + (gori_compute::outgoing_edge_range_p): Add range_query parameter, + and adjust to fur_source. + * gimple-range-gori.h (class gori_compute): Simplify and adjust to + range_query and fur_source. + * gimple-range.cc (gimple_ranger::range_on_edge): Query range_on_edge + from the ranger_cache.. + (gimple_ranger::fold_range_internal): Adjust to base class change of + ranger_cache. + (gimple_ranger::dump_bb): Adjust dump. + * gimple-range.h (gimple_ranger):export gori computes object. + +2021-06-01 Andrew MacLeod <amacleod(a)redhat.com> + + PR tree-optimization/100774 + * gimple-range-cache.cc (ranger_cache::get_non_stale_global_range): + Constant values are also not stale. + (ranger_cache::set_global_range): Range invariant values should also + have the correct timestamp. + 2021-05-31 Martin Liska <mliska(a)suse.cz> * tree-streamer-in.c (unpack_ts_function_decl_value_fields): diff --git a/gcc/DATESTAMP b/gcc/DATESTAMP index 6b43bb2aa0c..54b764ae94c 100644 --- a/gcc/DATESTAMP +++ b/gcc/DATESTAMP @@ -1 +1 @@ -20210601 +20210602 diff --git a/gcc/c-family/ChangeLog b/gcc/c-family/ChangeLog index e85a6bf2f75..cb2757c0b32 100644 --- a/gcc/c-family/ChangeLog +++ b/gcc/c-family/ChangeLog @@ -1,3 +1,12 @@ +2021-06-01 Martin Liska <mliska(a)suse.cz> + + PR other/100759 + * c-attribs.c (handle_optimize_attribute): Limit sanity check + to a situation where we are not in processing of an optimize + pragma. + * c-pragma.c (handle_pragma_pop_options): Restore target + options. + 2021-05-31 Indu Bhagat <indu.bhagat(a)oracle.com> PR testsuite/100749 diff --git a/gcc/cp/ChangeLog b/gcc/cp/ChangeLog index c764713465c..9a5fa7990f7 100644 --- a/gcc/cp/ChangeLog +++ b/gcc/cp/ChangeLog @@ -1,3 +1,22 @@ +2021-06-01 Patrick Palka <ppalka(a)redhat.com> + + PR c++/65816 + * init.c (expand_aggr_init_1): Check + type_has_non_user_provided_default_constructor instead of + type_has_user_provided_constructor. + +2021-06-01 Jason Merrill <jason(a)redhat.com> + + PR c++/91859 + * call.c (build_op_delete_call): Don't set CALL_FROM_NEW_OR_DELETE_P + for destroying delete. + * init.c (build_delete): Don't clobber before destroying delete. + +2021-06-01 Jason Merrill <jason(a)redhat.com> + + PR c++/94492 + * decl2.c (cp_warn_deprecated_use): Check warning_enabled_at. + 2021-05-31 Richard Biener <rguenther(a)suse.de> PR c++/88601 diff --git a/gcc/fortran/ChangeLog b/gcc/fortran/ChangeLog index 95857ccfa8c..bab25eb7351 100644 --- a/gcc/fortran/ChangeLog +++ b/gcc/fortran/ChangeLog @@ -1,3 +1,41 @@ +2021-06-01 Tobias Burnus <tobias(a)codesourcery.com> + + PR middle-end/99928 + * dump-parse-tree.c (show_omp_node, show_code_node): Handle + (parallel) master taskloop (simd). + * frontend-passes.c (gfc_code_walker): Set in_omp_workshare + to false for parallel master taskloop (simd). + * gfortran.h (enum gfc_statement): + Add ST_OMP_(END_)(PARALLEL_)MASTER_TASKLOOP(_SIMD). + (enum gfc_exec_op): EXEC_OMP_(PARALLEL_)MASTER_TASKLOOP(_SIMD). + * match.h (gfc_match_omp_master_taskloop, + gfc_match_omp_master_taskloop_simd, + gfc_match_omp_parallel_master_taskloop, + gfc_match_omp_parallel_master_taskloop_simd): New prototype. + * openmp.c (gfc_match_omp_parallel_master_taskloop, + gfc_match_omp_parallel_master_taskloop_simd, + gfc_match_omp_master_taskloop, + gfc_match_omp_master_taskloop_simd): New. + (gfc_match_omp_taskloop_simd): Permit 'reduction' clause. + (resolve_omp_clauses): Handle new combined directives; remove + inscan-reduction check to reduce multiple errors; add + task-reduction error for 'taskloop simd'. + (gfc_resolve_omp_parallel_blocks, + resolve_omp_do, omp_code_to_statement, + gfc_resolve_omp_directive): Handle new combined constructs. + * parse.c (decode_omp_directive, next_statement, + gfc_ascii_statement, parse_omp_do, parse_omp_structured_block, + parse_executable): Likewise. + * resolve.c (gfc_resolve_blocks, gfc_resolve_code): Likewise. + * st.c (gfc_free_statement): Likewise. + * trans.c (trans_code): Likewise. + * trans-openmp.c (gfc_split_omp_clauses, + gfc_trans_omp_directive): Likewise. + (gfc_trans_omp_parallel_master): Move after gfc_trans_omp_master_taskloop; + handle parallel master taskloop (simd) as well. + (gfc_trans_omp_taskloop): Take gfc_exec_op as arg. + (gfc_trans_omp_master_taskloop): New. + 2021-05-30 Gerald Pfeifer <gerald(a)pfeifer.com> * gfortran.texi (BOZ literal constants): Fix typo. diff --git a/gcc/testsuite/ChangeLog b/gcc/testsuite/ChangeLog index e55bbf28c9b..46dc8147391 100644 --- a/gcc/testsuite/ChangeLog +++ b/gcc/testsuite/ChangeLog @@ -1,3 +1,64 @@ +2021-06-01 Patrick Palka <ppalka(a)redhat.com> + + PR c++/65816 + * g++.dg/cpp0x/constexpr-delegating3.C: New test. + * g++.dg/cpp0x/dc10.C: New test. + * g++.dg/cpp0x/initlist-base4.C: New test. + * g++.dg/cpp2a/constexpr-init22.C: New test. + +2021-06-01 Andrew Pinski <apinski(a)marvell.com> + + PR tree-optimization/95481 + * gcc.dg/tree-ssa/tailcall-10.c: New test. + * gcc.dg/tree-ssa/tailcall-11.c: New test. + * gcc.dg/tree-ssa/tailcall-12.c: New test. + * gcc.dg/tree-ssa/tailcall-13.c: New test. + * gcc.dg/tree-ssa/tailrecursion-8.c: New test. + +2021-06-01 Bill Schmidt <wschmidt(a)linux.ibm.com> + + PR testsuite/100750 + * gcc.target/powerpc/rop-5.c: Require ELFv2 ABI. + +2021-06-01 Jason Merrill <jason(a)redhat.com> + + PR c++/91859 + * g++.dg/cpp2a/destroying-delete5.C: New test. + +2021-06-01 Jason Merrill <jason(a)redhat.com> + + PR c++/94492 + * g++.dg/cpp0x/depr-copy4.C: New test. + +2021-06-01 Aldy Hernandez <aldyh(a)redhat.com> + + * gcc.dg/Wstringop-overflow-55.c: Adjust for global ranges changes. + * gcc.dg/pr80776-1.c: Same. + +2021-06-01 Tobias Burnus <tobias(a)codesourcery.com> + + PR middle-end/99928 + * gfortran.dg/gomp/reduction5.f90: Remove dg-error; the issue is + now diagnosed with less error output. + * gfortran.dg/gomp/scan-1.f90: Likewise. + * gfortran.dg/gomp/pr99928-3.f90: New test. + * gfortran.dg/gomp/taskloop-1.f90: New test. + +2021-06-01 liuhongt <hongtao.liu(a)intel.com> + + PR tree-optimization/98365 + * gcc.target/i386/pr98365.c: New test. + +2021-06-01 Andrew MacLeod <amacleod(a)redhat.com> + + PR tree-optimization/100781 + * gcc.dg/pr100781.c: New. + +2021-06-01 Andrew MacLeod <amacleod(a)redhat.com> + + PR tree-optimization/100774 + * g++.dg/pr100774.C: New. + 2021-05-31 Tobias Burnus <tobias(a)codesourcery.com> * gfortran.dg/gomp/depend-iterator-1.f90: Use dg-do compile. diff --git a/libstdc++-v3/ChangeLog b/libstdc++-v3/ChangeLog index e50aeb9217a..3fe0a390799 100644 --- a/libstdc++-v3/ChangeLog +++ b/libstdc++-v3/ChangeLog @@ -1,3 +1,41 @@ +2021-06-01 Patrick Palka <ppalka(a)redhat.com> + + PR c++/65816 + * testsuite/23_containers/deque/allocator/default_init.cc, + testsuite/23_containers/forward_list/allocator/default_init.cc, + testsuite/23_containers/list/allocator/default_init.cc, + testsuite/23_containers/map/allocator/default_init.cc, + testsuite/23_containers/set/allocator/default_init.cc, + testsuite/23_containers/vector/allocator/default_init.cc, + testsuite/23_containers/vector/bool/allocator/default_init.cc: + Remove xfail. + +2021-06-01 Jonathan Wakely <jwakely(a)redhat.com> + + * testsuite/23_containers/unordered_map/96088.cc: Change + effective target to c++17. + * testsuite/23_containers/unordered_set/96088.cc: Likewise. + +2021-06-01 Jonathan Wakely <jwakely(a)redhat.com> + + * testsuite/22_locale/ctype/is/string/89728_neg.cc: Only test + isblank for C++11 and later. + +2021-06-01 Jonathan Wakely <jwakely(a)redhat.com> + + PR libstdc++/100833 + * include/bits/ranges_base.h (ranges::advance(iter, n, sentinel)): + Fix return value for no-op case. + * testsuite/24_iterators/range_operations/advance.cc: Test + return values of three-argument overload. + +2021-06-01 Jonathan Wakely <jwakely(a)redhat.com> + + PR libstdc++/99453 + * python/Makefile.am: Use archive name for printer hook if no + dynamic library name is available. + * python/Makefile.in: Regenerate. + 2021-05-30 Gerald Pfeifer <gerald(a)pfeifer.com> * doc/xml/manual/abi.xml: Remove dead reference to "Intel </cut>

3 years, 4 months

1
0
0 0

[TCWG CI] Regression caused by gcc: Correct handling of variable offset minus constant in -Warray-bounds [PR100137]

by ci_notify＠linaro.org

[TCWG CI] Regression caused by gcc: Correct handling of variable offset minus constant in -Warray-bounds [PR100137]: commit a110855667782dac7b674d3e328b253b3b3c919b Author: Martin Sebor <msebor(a)redhat.com> Correct handling of variable offset minus constant in -Warray-bounds [PR100137] Results regressed to # reset_artifacts: -10 # build_abe binutils: -9 # build_abe stage1: -5 # build_abe qemu: -2 # linux_n_obj: 20477 # First few build errors in logs: # 00:03:37 ./include/asm-generic/rwonce.h:44:26: error: array subscript 1 is outside array bounds of ‘struct page[0]’ [-Werror=array-bounds] # 00:03:37 make[2]: *** [arch/arm64/mm/flush.o] Error 1 # 00:03:37 ./include/asm-generic/rwonce.h:44:26: error: array subscript 1 is outside array bounds of ‘struct page[0]’ [-Werror=array-bounds] # 00:03:37 ./include/asm-generic/rwonce.h:44:26: error: array subscript 1 is outside array bounds of ‘struct page[0]’ [-Werror=array-bounds] # 00:03:37 ./include/asm-generic/rwonce.h:44:26: error: array subscript 1 is outside array bounds of ‘struct page[0]’ [-Werror=array-bounds] # 00:03:37 ./include/asm-generic/rwonce.h:44:26: error: array subscript 1 is outside array bounds of ‘struct page[0]’ [-Werror=array-bounds] # 00:03:37 ./include/asm-generic/rwonce.h:44:26: error: array subscript 0 is outside array bounds of ‘struct page[0]’ [-Werror=array-bounds] # 00:03:37 ./include/asm-generic/bitops/non-atomic.h:118:27: error: array subscript 0 is outside array bounds of ‘struct page[0]’ [-Werror=array-bounds] # 00:03:37 ./include/linux/mm.h:683:23: error: array subscript 1 is outside array bounds of ‘struct page[0]’ [-Werror=array-bounds] # 00:03:37 ./include/asm-generic/rwonce.h:44:26: error: array subscript 1 is outside array bounds of ‘struct page[0]’ [-Werror=array-bounds] from # reset_artifacts: -10 # build_abe binutils: -9 # build_abe stage1: -5 # build_abe qemu: -2 # linux_n_obj: 20799 # linux build successful: all THIS IS THE END OF INTERESTING STUFF. BELOW ARE LINKS TO BUILDS, REPRODUCTION INSTRUCTIONS, AND THE RAW COMMIT. This commit has regressed these CI configurations: - tcwg_kernel/gnu-release-aarch64-mainline-allyesconfig First_bad build: https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-aarch64-mainli… Last_good build: https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-aarch64-mainli… Baseline build: https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-aarch64-mainli… Even more details: https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-aarch64-mainli… Reproduce builds: <cut> mkdir investigate-gcc-a110855667782dac7b674d3e328b253b3b3c919b cd investigate-gcc-a110855667782dac7b674d3e328b253b3b3c919b # Fetch scripts git clone https://git.linaro.org/toolchain/jenkins-scripts # Fetch manifests and test.sh script mkdir -p artifacts/manifests curl -o artifacts/manifests/build-baseline.sh https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-aarch64-mainli… --fail curl -o artifacts/manifests/build-parameters.sh https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-aarch64-mainli… --fail curl -o artifacts/test.sh https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-aarch64-mainli… --fail chmod +x artifacts/test.sh # Reproduce the baseline build (build all pre-requisites) ./jenkins-scripts/tcwg_kernel-build.sh @@ artifacts/manifests/build-baseline.sh # Save baseline build state (which is then restored in artifacts/test.sh) mkdir -p ./bisect rsync -a --del --delete-excluded --exclude /bisect/ --exclude /artifacts/ --exclude /gcc/ ./ ./bisect/baseline/ cd gcc # Reproduce first_bad build git checkout --detach a110855667782dac7b674d3e328b253b3b3c919b ../artifacts/test.sh # Reproduce last_good build git checkout --detach 6278065af07634278ba30029d92a82b089969baa ../artifacts/test.sh cd .. </cut> Full commit (up to 1000 lines): <cut> commit a110855667782dac7b674d3e328b253b3b3c919b Author: Martin Sebor <msebor(a)redhat.com> Date: Wed Jul 7 14:05:25 2021 -0600 Correct handling of variable offset minus constant in -Warray-bounds [PR100137] Resolves: PR tree-optimization/100137 - -Warray-bounds false positive on varying offset plus negative PR tree-optimization/99121 - ICE in -Warray-bounds on a multidimensional PR tree-optimization/97027 - missing warning on buffer overflow storing a larger scalar into a smaller array gcc/ChangeLog: PR tree-optimization/100137 PR tree-optimization/99121 PR tree-optimization/97027 * builtins.c (access_ref::access_ref): Also set offmax. (access_ref::offset_in_range): Define new function. (access_ref::add_offset): Set offmax. (access_ref::inform_access): Handle access_none. (handle_mem_ref): Clear ostype. (compute_objsize_r): Handle ASSERT_EXPR. * builtins.h (struct access_ref): Add offmax member. * gimple-array-bounds.cc (array_bounds_checker::check_mem_ref): Use compute_objsize() and simplify. gcc/testsuite/ChangeLog: PR tree-optimization/100137 PR tree-optimization/99121 PR tree-optimization/97027 * c-c++-common/Warray-bounds-3.c: Remove xfail * c-c++-common/Warray-bounds-4.c: Add an expected warning. * c-c++-common/Warray-bounds-9.c: New test. * c-c++-common/Warray-bounds-10.c: New test. * g++.dg/asan/asan_test.C: Suppress expected warnings. * g++.dg/pr95768.C: Same. * g++.dg/warn/Warray-bounds-10.C: Adjust text of expected messages. * g++.dg/warn/Warray-bounds-11.C: Same. * g++.dg/warn/Warray-bounds-12.C: Same. * g++.dg/warn/Warray-bounds-13.C: Same. * g++.dg/warn/Warray-bounds-17.C: Same. * g++.dg/warn/Warray-bounds-20.C: Same. * gcc.dg/Warray-bounds-29.c: Same. * gcc.dg/Warray-bounds-30.c: Add xfail. * gcc.dg/Warray-bounds-31.c: Adjust text of expected messages. * gcc.dg/Warray-bounds-32.c: Same. * gcc.dg/Warray-bounds-52.c: Same. * gcc.dg/Warray-bounds-53.c: Same. * gcc.dg/Warray-bounds-58.c: Remove xfail. * gcc.dg/Warray-bounds-63.c: Adjust text of expected messages. * gcc.dg/Warray-bounds-66.c: Same. * gcc.dg/Warray-bounds-69.c: Same. * gcc.dg/Wstringop-overflow-34.c: Same. * gcc.dg/Wstringop-overflow-47.c: Same. * gcc.dg/Wstringop-overflow-61.c: Same. * gcc.dg/Warray-bounds-77.c: New test. * gcc.dg/Warray-bounds-78.c: New test. * gcc.dg/Warray-bounds-79.c: New test. --- gcc/builtins.c | 69 +++++- gcc/builtins.h | 5 + gcc/gimple-array-bounds.cc | 336 ++++---------------------- gcc/testsuite/c-c++-common/Warray-bounds-10.c | 114 +++++++++ gcc/testsuite/c-c++-common/Warray-bounds-3.c | 4 +- gcc/testsuite/c-c++-common/Warray-bounds-4.c | 12 +- gcc/testsuite/c-c++-common/Warray-bounds-9.c | 144 +++++++++++ gcc/testsuite/g++.dg/asan/asan_test.C | 2 +- gcc/testsuite/g++.dg/pr95768.C | 2 +- gcc/testsuite/g++.dg/warn/Warray-bounds-10.C | 4 +- gcc/testsuite/g++.dg/warn/Warray-bounds-11.C | 4 +- gcc/testsuite/g++.dg/warn/Warray-bounds-12.C | 4 +- gcc/testsuite/g++.dg/warn/Warray-bounds-13.C | 4 +- gcc/testsuite/g++.dg/warn/Warray-bounds-17.C | 2 +- gcc/testsuite/g++.dg/warn/Warray-bounds-20.C | 8 +- gcc/testsuite/gcc.dg/Warray-bounds-29.c | 22 +- gcc/testsuite/gcc.dg/Warray-bounds-30.c | 2 +- gcc/testsuite/gcc.dg/Warray-bounds-31.c | 8 +- gcc/testsuite/gcc.dg/Warray-bounds-32.c | 26 +- gcc/testsuite/gcc.dg/Warray-bounds-52.c | 6 +- gcc/testsuite/gcc.dg/Warray-bounds-53.c | 6 +- gcc/testsuite/gcc.dg/Warray-bounds-58.c | 2 +- gcc/testsuite/gcc.dg/Warray-bounds-63.c | 6 +- gcc/testsuite/gcc.dg/Warray-bounds-66.c | 12 +- gcc/testsuite/gcc.dg/Warray-bounds-69.c | 2 +- gcc/testsuite/gcc.dg/Warray-bounds-77.c | 135 +++++++++++ gcc/testsuite/gcc.dg/Warray-bounds-78.c | 109 +++++++++ gcc/testsuite/gcc.dg/Warray-bounds-79.c | 112 +++++++++ gcc/testsuite/gcc.dg/Wstringop-overflow-34.c | 8 +- gcc/testsuite/gcc.dg/Wstringop-overflow-47.c | 14 +- gcc/testsuite/gcc.dg/Wstringop-overflow-61.c | 4 +- 31 files changed, 817 insertions(+), 371 deletions(-) diff --git a/gcc/builtins.c b/gcc/builtins.c index e52fe4291c8..39ab139b7e1 100644 --- a/gcc/builtins.c +++ b/gcc/builtins.c @@ -206,6 +206,7 @@ access_ref::access_ref (tree bound /* = NULL_TREE */, { /* Set to valid. */ offrng[0] = offrng[1] = 0; + offmax[0] = offmax[1] = 0; /* Invalidate. */ sizrng[0] = sizrng[1] = -1; @@ -457,6 +458,21 @@ access_ref::size_remaining (offset_int *pmin /* = NULL */) const return sizrng[1] - or0; } +/* Return true if the offset and object size are in range for SIZE. */ + +bool +access_ref::offset_in_range (const offset_int &size) const +{ + if (size_remaining () < size) + return false; + + if (base0) + return offmax[0] >= 0 && offmax[1] <= sizrng[1]; + + offset_int maxoff = wi::to_offset (TYPE_MAX_VALUE (ptrdiff_type_node)); + return offmax[0] > -maxoff && offmax[1] < maxoff; +} + /* Add the range [MIN, MAX] to the offset range. For known objects (with zero-based offsets) at least one of whose offset's bounds is in range, constrain the other (or both) to the bounds of the object (i.e., zero @@ -493,6 +509,8 @@ void access_ref::add_offset (const offset_int &min, const offset_int &max) if (max >= 0) { offrng[0] = 0; + if (offmax[0] > 0) + offmax[0] = 0; return; } @@ -509,6 +527,12 @@ void access_ref::add_offset (const offset_int &min, const offset_int &max) offrng[0] = 0; } + /* Set the minimum and maximmum computed so far. */ + if (offrng[1] < 0 && offrng[1] < offmax[0]) + offmax[0] = offrng[1]; + if (offrng[0] > 0 && offrng[0] > offmax[1]) + offmax[1] = offrng[0]; + if (!base0) return; @@ -4571,23 +4595,46 @@ access_ref::inform_access (access_mode mode) const return; } + if (mode == access_read_only) + { + if (allocfn == NULL_TREE) + { + if (*offstr) + inform (loc, "at offset %s into source object %qE of size %s", + offstr, ref, sizestr); + else + inform (loc, "source object %qE of size %s", ref, sizestr); + + return; + } + + if (*offstr) + inform (loc, + "at offset %s into source object of size %s allocated by %qE", + offstr, sizestr, allocfn); + else + inform (loc, "source object of size %s allocated by %qE", + sizestr, allocfn); + return; + } + if (allocfn == NULL_TREE) { if (*offstr) - inform (loc, "at offset %s into source object %qE of size %s", + inform (loc, "at offset %s into object %qE of size %s", offstr, ref, sizestr); else - inform (loc, "source object %qE of size %s", ref, sizestr); + inform (loc, "object %qE of size %s", ref, sizestr); return; } if (*offstr) inform (loc, - "at offset %s into source object of size %s allocated by %qE", + "at offset %s into object of size %s allocated by %qE", offstr, sizestr, allocfn); else - inform (loc, "source object of size %s allocated by %qE", + inform (loc, "object of size %s allocated by %qE", sizestr, allocfn); } @@ -5433,16 +5480,16 @@ handle_mem_ref (tree mref, int ostype, access_ref *pref, if (VECTOR_TYPE_P (TREE_TYPE (mref))) { - /* Hack: Give up for MEM_REFs of vector types; those may be - synthesized from multiple assignments to consecutive data - members (see PR 93200 and 96963). + /* Hack: Handle MEM_REFs of vector types as those to complete + objects; those may be synthesized from multiple assignments + to consecutive data members (see PR 93200 and 96963). FIXME: Vectorized assignments should only be present after vectorization so this hack is only necessary after it has run and could be avoided in calls from prior passes (e.g., tree-ssa-strlen.c). FIXME: Deal with this more generally, e.g., by marking up such MEM_REFs at the time they're created. */ - return false; + ostype = 0; } tree mrefop = TREE_OPERAND (mref, 0); @@ -5796,6 +5843,12 @@ compute_objsize_r (tree ptr, int ostype, access_ref *pref, tree rhs = gimple_assign_rhs1 (stmt); + if (code == ASSERT_EXPR) + { + rhs = TREE_OPERAND (rhs, 0); + return compute_objsize_r (rhs, ostype, pref, snlim, qry); + } + if (code == POINTER_PLUS_EXPR && TREE_CODE (TREE_TYPE (rhs)) == POINTER_TYPE) { diff --git a/gcc/builtins.h b/gcc/builtins.h index e71f40c300a..a64ece3f1cd 100644 --- a/gcc/builtins.h +++ b/gcc/builtins.h @@ -222,6 +222,9 @@ struct access_ref argument to the minimum. */ offset_int size_remaining (offset_int * = NULL) const; +/* Return true if the offset and object size are in range for SIZE. */ + bool offset_in_range (const offset_int &) const; + /* Return true if *THIS is an access to a declared object. */ bool ref_declared () const { @@ -261,6 +264,8 @@ struct access_ref /* Range of byte offsets into and sizes of the object(s). */ offset_int offrng[2]; offset_int sizrng[2]; + /* The minimum and maximum offset computed. */ + offset_int offmax[2]; /* Range of the bound of the access: denotes that the access is at least BNDRNG[0] bytes but no more than BNDRNG[1]. For string functions the size of the actual access is diff --git a/gcc/gimple-array-bounds.cc b/gcc/gimple-array-bounds.cc index 13f08685f8f..83b8db9755e 100644 --- a/gcc/gimple-array-bounds.cc +++ b/gcc/gimple-array-bounds.cc @@ -414,269 +414,72 @@ array_bounds_checker::check_mem_ref (location_t location, tree ref, if (warning_suppressed_p (ref, OPT_Warray_bounds)) return false; - tree arg = TREE_OPERAND (ref, 0); - /* The constant and variable offset of the reference. */ - tree cstoff = TREE_OPERAND (ref, 1); - tree varoff = NULL_TREE; - - const offset_int maxobjsize = tree_to_shwi (max_object_size ()); - - /* The zero-based array or string constant bounds in bytes. Initially - set to [-MAXOBJSIZE - 1, MAXOBJSIZE] until a tighter bound is - determined. */ - offset_int arrbounds[2] = { -maxobjsize - 1, maxobjsize }; - - /* The minimum and maximum intermediate offset. For a reference - to be valid, not only does the final offset/subscript must be - in bounds but all intermediate offsets should be as well. - GCC may be able to deal gracefully with such out-of-bounds - offsets so the checking is only enabled at -Warray-bounds=2 - where it may help detect bugs in uses of the intermediate - offsets that could otherwise not be detectable. */ - offset_int ioff = wi::to_offset (fold_convert (ptrdiff_type_node, cstoff)); - offset_int extrema[2] = { 0, wi::abs (ioff) }; - - /* The range of the byte offset into the reference. */ - offset_int offrange[2] = { 0, 0 }; - /* The statement used to allocate the array or null. */ gimple *alloc_stmt = NULL; /* For an allocation statement, the low bound of the size range. */ offset_int minbound = 0; + /* The type and size of the access. */ + tree axstype = TREE_TYPE (ref); + offset_int axssize = 0; + if (TREE_CODE (axstype) != UNION_TYPE) + if (tree access_size = TYPE_SIZE_UNIT (axstype)) + if (TREE_CODE (access_size) == INTEGER_CST) + axssize = wi::to_offset (access_size); - /* Determine the offsets and increment OFFRANGE for the bounds of each. - The loop computes the range of the final offset for expressions such - as (A + i0 + ... + iN)[CSTOFF] where i0 through iN are SSA_NAMEs in - some range. */ - const unsigned limit = param_ssa_name_def_chain_limit; - for (unsigned n = 0; TREE_CODE (arg) == SSA_NAME && n < limit; ++n) - { - gimple *def = SSA_NAME_DEF_STMT (arg); - if (is_gimple_call (def)) - { - /* Determine the byte size of the array from an allocation call. */ - wide_int sizrng[2]; - if (gimple_call_alloc_size (def, sizrng)) - { - arrbounds[0] = 0; - arrbounds[1] = offset_int::from (sizrng[1], UNSIGNED); - minbound = offset_int::from (sizrng[0], UNSIGNED); - alloc_stmt = def; - } - break; - } - - if (gimple_nop_p (def)) - { - /* For a function argument try to determine the byte size - of the array from the current function declaratation - (e.g., attribute access or related). */ - wide_int wr[2]; - tree ref = gimple_parm_array_size (arg, wr); - if (!ref) - break; - arrbounds[0] = offset_int::from (wr[0], UNSIGNED); - arrbounds[1] = offset_int::from (wr[1], UNSIGNED); - arg = ref; - break; - } - - if (!is_gimple_assign (def)) - break; - - tree_code code = gimple_assign_rhs_code (def); - if (code == POINTER_PLUS_EXPR) - { - arg = gimple_assign_rhs1 (def); - varoff = gimple_assign_rhs2 (def); - } - else if (code == ASSERT_EXPR) - { - arg = TREE_OPERAND (gimple_assign_rhs1 (def), 0); - continue; - } - else - return false; - - /* VAROFF should always be a SSA_NAME here (and not even - INTEGER_CST) but there's no point in taking chances. */ - if (TREE_CODE (varoff) != SSA_NAME) - break; - - const value_range* const vr = get_value_range (varoff); - if (!vr || vr->undefined_p () || vr->varying_p ()) - break; - - if (!vr->constant_p ()) - break; - - if (vr->kind () == VR_RANGE) - { - offset_int min - = wi::to_offset (fold_convert (ptrdiff_type_node, vr->min ())); - offset_int max - = wi::to_offset (fold_convert (ptrdiff_type_node, vr->max ())); - if (min < max) - { - offrange[0] += min; - offrange[1] += max; - } - else - { - /* When MIN >= MAX, the offset is effectively in a union - of two ranges: [-MAXOBJSIZE -1, MAX] and [MIN, MAXOBJSIZE]. - Since there is no way to represent such a range across - additions, conservatively add [-MAXOBJSIZE -1, MAXOBJSIZE] - to OFFRANGE. */ - offrange[0] += arrbounds[0]; - offrange[1] += arrbounds[1]; - } - } - else - { - /* For an anti-range, analogously to the above, conservatively - add [-MAXOBJSIZE -1, MAXOBJSIZE] to OFFRANGE. */ - offrange[0] += arrbounds[0]; - offrange[1] += arrbounds[1]; - } - - /* Keep track of the minimum and maximum offset. */ - if (offrange[1] < 0 && offrange[1] < extrema[0]) - extrema[0] = offrange[1]; - if (offrange[0] > 0 && offrange[0] > extrema[1]) - extrema[1] = offrange[0]; - - if (offrange[0] < arrbounds[0]) - offrange[0] = arrbounds[0]; - - if (offrange[1] > arrbounds[1]) - offrange[1] = arrbounds[1]; - } + access_ref aref; + if (!compute_objsize (ref, 1, &aref, ranges)) + return false; - tree reftype = NULL_TREE; - offset_int eltsize = -1; - if (arrbounds[0] >= 0) - { - /* The byte size of the array has already been determined above - based on a pointer ARG. Set ELTSIZE to the size of the type - it points to and REFTYPE to the array with the size, rounded - down as necessary. */ - reftype = TREE_TYPE (TREE_TYPE (arg)); - if (TREE_CODE (reftype) == ARRAY_TYPE) - reftype = TREE_TYPE (reftype); - if (tree refsize = TYPE_SIZE_UNIT (reftype)) - if (TREE_CODE (refsize) == INTEGER_CST) - eltsize = wi::to_offset (refsize); - - if (eltsize < 0) - return false; + if (aref.offset_in_range (axssize)) + return false; - offset_int nelts = arrbounds[1] / eltsize; - reftype = build_printable_array_type (reftype, nelts.to_uhwi ()); - } - else if (TREE_CODE (arg) == ADDR_EXPR) + if (TREE_CODE (aref.ref) == SSA_NAME) { - arg = TREE_OPERAND (arg, 0); - if (TREE_CODE (arg) != STRING_CST - && TREE_CODE (arg) != PARM_DECL - && TREE_CODE (arg) != VAR_DECL) - return false; - - /* The type of the object being referred to. It can be an array, - string literal, or a non-array type when the MEM_REF represents - a reference/subscript via a pointer to an object that is not - an element of an array. Incomplete types are excluded as well - because their size is not known. */ - reftype = TREE_TYPE (arg); - if (POINTER_TYPE_P (reftype) - || !COMPLETE_TYPE_P (reftype) - || TREE_CODE (TYPE_SIZE_UNIT (reftype)) != INTEGER_CST) - return false; - - /* Except in declared objects, references to trailing array members - of structs and union objects are excluded because MEM_REF doesn't - make it possible to identify the member where the reference - originated. */ - if (RECORD_OR_UNION_TYPE_P (reftype) - && (!VAR_P (arg) - || (DECL_EXTERNAL (arg) && array_at_struct_end_p (ref)))) - return false; - - /* FIXME: Should this be 1 for Fortran? */ - arrbounds[0] = 0; - - if (TREE_CODE (reftype) == ARRAY_TYPE) - { - /* Set to the size of the array element (and adjust below). */ - eltsize = wi::to_offset (TYPE_SIZE_UNIT (TREE_TYPE (reftype))); - /* Use log2 of size to convert the array byte size in to its - upper bound in elements. */ - const offset_int eltsizelog2 = wi::floor_log2 (eltsize); - if (tree dom = TYPE_DOMAIN (reftype)) - { - tree bnds[] = { TYPE_MIN_VALUE (dom), TYPE_MAX_VALUE (dom) }; - if (TREE_CODE (arg) == COMPONENT_REF) - { - offset_int size = maxobjsize; - if (tree fldsize = component_ref_size (arg)) - size = wi::to_offset (fldsize); - arrbounds[1] = wi::lrshift (size, eltsizelog2); - } - else if (array_at_struct_end_p (arg) || !bnds[0] || !bnds[1]) - arrbounds[1] = wi::lrshift (maxobjsize, eltsizelog2); - else - arrbounds[1] = (wi::to_offset (bnds[1]) - wi::to_offset (bnds[0]) - + 1) * eltsize; - } - else - arrbounds[1] = wi::lrshift (maxobjsize, eltsizelog2); - - /* Determine a tighter bound of the non-array element type. */ - tree eltype = TREE_TYPE (reftype); - while (TREE_CODE (eltype) == ARRAY_TYPE) - eltype = TREE_TYPE (eltype); - eltsize = wi::to_offset (TYPE_SIZE_UNIT (eltype)); - } - else + gimple *def = SSA_NAME_DEF_STMT (aref.ref); + if (is_gimple_call (def)) { - eltsize = 1; - tree size = TYPE_SIZE_UNIT (reftype); - if (VAR_P (arg)) - if (tree initsize = DECL_SIZE_UNIT (arg)) - if (tree_int_cst_lt (size, initsize)) - size = initsize; - - arrbounds[1] = wi::to_offset (size); + /* Save the allocation call and the low bound on the size. */ + alloc_stmt = def; + minbound = aref.sizrng[0]; } } - else - return false; - - offrange[0] += ioff; - offrange[1] += ioff; + + /* The range of the byte offset into the reference. Adjusted below. */ + offset_int offrange[2] = { aref.offrng[0], aref.offrng[1] }; + + /* The type of the referenced object. */ + tree reftype = TREE_TYPE (aref.ref); + /* The size of the referenced array element. */ + offset_int eltsize = 1; + /* The byte size of the array has already been determined above + based on a pointer ARG. Set ELTSIZE to the size of the type + it points to and REFTYPE to the array with the size, rounded + down as necessary. */ + if (POINTER_TYPE_P (reftype)) + reftype = TREE_TYPE (reftype); + if (TREE_CODE (reftype) == ARRAY_TYPE) + reftype = TREE_TYPE (reftype); + if (tree refsize = TYPE_SIZE_UNIT (reftype)) + if (TREE_CODE (refsize) == INTEGER_CST) + eltsize = wi::to_offset (refsize); + + const offset_int nelts = aref.sizrng[1] / eltsize; + reftype = build_printable_array_type (reftype, nelts.to_uhwi ()); /* Compute the more permissive upper bound when IGNORE_OFF_BY_ONE is set (when taking the address of the one-past-last element of an array) but always use the stricter bound in diagnostics. */ - offset_int ubound = arrbounds[1]; + offset_int ubound = aref.sizrng[1]; if (ignore_off_by_one) ubound += eltsize; - bool warned = false; /* Set if the lower bound of the subscript is out of bounds. */ - const bool lboob = (arrbounds[0] == arrbounds[1] + const bool lboob = (aref.sizrng[1] == 0 || offrange[0] >= ubound - || offrange[1] < arrbounds[0]); + || offrange[1] < 0); /* Set if only the upper bound of the subscript is out of bounds. This can happen when using a bigger type to index into an array of a smaller type, as is common with unsigned char. */ - tree axstype = TREE_TYPE (ref); - offset_int axssize = 0; - if (TREE_CODE (axstype) != UNION_TYPE) - if (tree access_size = TYPE_SIZE_UNIT (axstype)) - if (TREE_CODE (access_size) == INTEGER_CST) - axssize = wi::to_offset (access_size); - const bool uboob = !lboob && offrange[0] + axssize > ubound; if (lboob || uboob) { @@ -689,9 +492,7 @@ array_bounds_checker::check_mem_ref (location_t location, tree ref, to compute the index to print in the diagnostic; arrays in MEM_REF don't mean anything. A type with no size like void is as good as having a size of 1. */ - tree type = TREE_TYPE (ref); - while (TREE_CODE (type) == ARRAY_TYPE) - type = TREE_TYPE (type); + tree type = strip_array_types (TREE_TYPE (ref)); if (tree size = TYPE_SIZE_UNIT (type)) { offrange[0] = offrange[0] / wi::to_offset (size); @@ -699,6 +500,7 @@ array_bounds_checker::check_mem_ref (location_t location, tree ref, } } + bool warned = false; if (lboob) { if (offrange[0] == offrange[1]) @@ -720,7 +522,7 @@ array_bounds_checker::check_mem_ref (location_t location, tree ref, /* If the memory was dynamically allocated refer to it as if it were an untyped array of bytes. */ backtype = build_array_type_nelts (unsigned_char_type_node, - arrbounds[1].to_uhwi ()); + aref.sizrng[1].to_uhwi ()); warned = warning_at (location, OPT_Warray_bounds, "array subscript %<%T[%wi]%> is partly " @@ -730,46 +532,8 @@ array_bounds_checker::check_mem_ref (location_t location, tree ref, if (warned) { - if (DECL_P (arg)) - inform (DECL_SOURCE_LOCATION (arg), "while referencing %qD", arg); - else if (alloc_stmt) - { - location_t loc = gimple_location (alloc_stmt); - if (gimple_call_builtin_p (alloc_stmt, BUILT_IN_ALLOCA_WITH_ALIGN)) - { - if (minbound == arrbounds[1]) - inform (loc, "referencing a variable length array " - "of size %wu", minbound.to_uhwi ()); - else - inform (loc, "referencing a variable length array " - "of size between %wu and %wu", - minbound.to_uhwi (), arrbounds[1].to_uhwi ()); - } - else if (tree fndecl = gimple_call_fndecl (alloc_stmt)) - { - if (minbound == arrbounds[1]) - inform (loc, "referencing an object of size %wu " - "allocated by %qD", - minbound.to_uhwi (), fndecl); - else - inform (loc, "referencing an object of size between " - "%wu and %wu allocated by %qD", - minbound.to_uhwi (), arrbounds[1].to_uhwi (), fndecl); - } - else - { - tree fntype = gimple_call_fntype (alloc_stmt); - if (minbound == arrbounds[1]) - inform (loc, "referencing an object of size %wu " - "allocated by %qT", - minbound.to_uhwi (), fntype); - else - inform (loc, "referencing an object of size between " - "%wu and %wu allocated by %qT", - minbound.to_uhwi (), arrbounds[1].to_uhwi (), fntype); - } - } - + /* TODO: Determine the access from the statement and use it. */ + aref.inform_access (access_none); suppress_warning (ref, OPT_Warray_bounds); return true; } @@ -779,9 +543,9 @@ array_bounds_checker::check_mem_ref (location_t location, tree ref, /* At level 2 check also intermediate offsets. */ int i = 0; - if (extrema[i] < -arrbounds[1] || extrema[i = 1] > ubound) + if (aref.offmax[i] < -aref.sizrng[1] || aref.offmax[i = 1] > ubound) { - HOST_WIDE_INT tmpidx = extrema[i].to_shwi () / eltsize.to_shwi (); + HOST_WIDE_INT tmpidx = aref.offmax[i].to_shwi () / eltsize.to_shwi (); if (warning_at (location, OPT_Warray_bounds, "intermediate array offset %wi is outside array bounds " diff --git a/gcc/testsuite/c-c++-common/Warray-bounds-10.c b/gcc/testsuite/c-c++-common/Warray-bounds-10.c new file mode 100644 index 00000000000..cfe9a383410 --- /dev/null +++ b/gcc/testsuite/c-c++-common/Warray-bounds-10.c @@ -0,0 +1,114 @@ +/* PR tree-optimization/99475 - bogus -Warray-bounds accessing an array + element of empty structs + { dg-do compile } + { dg-options "-O2 -Wall" } */ + +struct S +{ +#if SOME_CONFIG_MACRO + /* Suppose the contents are empty in the development configuration + but non-empty in others. Out of bounds accesses to elements of + the arrays below should be diagnosed in all configurations, + including when S is empty, even if they are folded away. */ + int member; +#endif +}; + +extern struct S sa3[3]; +extern struct S sa2_3[2][3]; +extern struct S sa3_4_5[3][4][5]; + +void sink (void*); + + +void access_sa3 (struct S s) +{ + sa3[0] = s; + sa3[1] = s; + sa3[2] = s; + sa3[3] = s; // { dg-warning "\\\[-Warray-bounds" "pr?????" { xfail *-*-* } } +} + +void access_sa3_ptr (struct S s) +{ + struct S *p = &sa3[0]; + + p[0] = s; // { dg-bogus "\\\[-Warray-bounds" } + p[1] = s; // { dg-bogus "\\\[-Warray-bounds" } + p[2] = s; // { dg-bogus "\\\[-Warray-bounds" } + p[3] = s; // { dg-warning "\\\[-Warray-bounds" "pr?????" { xfail *-*-* } } +} + +void access_sa2_3_ptr (struct S s) +{ + struct S *p = &sa2_3[0][0]; + + p[0] = s; // { dg-bogus "\\\[-Warray-bounds" } + p[1] = s; // { dg-bogus "\\\[-Warray-bounds" } + p[2] = s; // { dg-bogus "\\\[-Warray-bounds" } + p[6] = s; // { dg-warning "\\\[-Warray-bounds" "pr?????" { xfail *-*-* } } +} + +void access_sa3_4_5_ptr (struct S s, int i) +{ + struct S *p = &sa3_4_5[0][0][0]; + + p[0] = s; // { dg-bogus "\\\[-Warray-bounds" } + p[1] = s; // { dg-bogus "\\\[-Warray-bounds" } + p[2] = s; // { dg-bogus "\\\[-Warray-bounds" } + p[60] = s; // { dg-warning "\\\[-Warray-bounds" "pr?????" { xfail *-*-* } } +} + + +void access_vla3 (struct S s, unsigned n) +{ + struct S vla3[3 < n ? 3 : n]; + + vla3[0] = s; + vla3[1] = s; + vla3[2] = s; + vla3[3] = s; // { dg-warning "\\\[-Warray-bounds" "pr?????" { xfail *-*-* } } + + sink (vla3); +} + +void access_vla3_ptr (struct S s, unsigned n) +{ + struct S vla3[3 < n ? 3 : n]; + struct S *p = &vla3[0]; + + p[0] = s; // { dg-bogus "\\\[-Warray-bounds" } + p[1] = s; // { dg-bogus "\\\[-Warray-bounds" } + p[2] = s; // { dg-bogus "\\\[-Warray-bounds" } + p[3] = s; // { dg-warning "\\\[-Warray-bounds" "pr?????" { xfail *-*-* } } + + sink (vla3); +} + +void access_vla2_3_ptr (struct S s, unsigned n) +{ + struct S vla2_3[2 < n ? 2 : n][3 < n ? 3 : n]; + struct S *p = &vla2_3[0][0]; + + p[0] = s; // { dg-bogus "\\\[-Warray-bounds" } + p[1] = s; // { dg-bogus "\\\[-Warray-bounds" } + p[2] = s; // { dg-bogus "\\\[-Warray-bounds" } + p[6] = s; // { dg-warning "\\\[-Warray-bounds" "pr?????" { xfail *-*-* } } + + sink (vla2_3); +} + +void access_vla3_4_5_ptr (struct S s, unsigned n) +{ + struct S vla3_4_5[3 < n ? 3 : n][4 < n ? 4 : n][5 < n ? 5 : n]; + struct S *p = &vla3_4_5[0][0][0]; + + p[0] = s; // { dg-bogus "\\\[-Warray-bounds" } + p[1] = s; // { dg-bogus "\\\[-Warray-bounds" } + p[2] = s; // { dg-bogus "\\\[-Warray-bounds" } + p[60] = s; // { dg-warning "\\\[-Warray-bounds" "pr?????" { xfail *-*-* } } + + sink (vla3_4_5); +} + +// { dg-prune-output "empty struct has size 0 in C" } diff --git a/gcc/testsuite/c-c++-common/Warray-bounds-3.c b/gcc/testsuite/c-c++-common/Warray-bounds-3.c index aae4999ea13..3d7c7687374 100644 --- a/gcc/testsuite/c-c++-common/Warray-bounds-3.c +++ b/gcc/testsuite/c-c++-common/Warray-bounds-3.c @@ -158,7 +158,7 @@ void test_memcpy_overflow (char *d, const char *s, size_t n) but known access size is detected. This works except with small sizes that are powers of 2 due to bug . */ T (char, 1, arr + SR (DIFF_MAX - 1, DIFF_MAX), s, 1); - T (char, 1, arr + SR (DIFF_MAX - 1, DIFF_MAX), s, 2); /* { dg-warning "pointer overflow between offset \\\[\[0-9\]+, \[0-9\]+] and size 2 accessing array " "bug " { xfail non_strict_align } } */ + T (char, 1, arr + SR (DIFF_MAX - 1, DIFF_MAX), s, 2); /* { dg-warning "\\\[-Warray-bounds" } */ T (char, 1, arr + SR (DIFF_MAX - 2, DIFF_MAX), s, 3); /* { dg-warning "pointer overflow between offset \\\[\[0-9\]+, \[0-9\]+] and size 3 accessing array " "memcpy" } */ T (char, 1, arr + SR (DIFF_MAX - 4, DIFF_MAX), s, 5); /* { dg-warning "pointer overflow between offset \\\[\[0-9\]+, \[0-9\]+] and size 5 accessing array " "memcpy" } */ } @@ -178,7 +178,7 @@ void test_memcpy_bounds_memarray_range (void) TM (ma.a5, ma.a5 + i, ma.a5, 1); TM (ma.a5, ma.a5 + i, ma.a5, 3); - TM (ma.a5, ma.a5 + i, ma.a5, 5); + TM (ma.a5, ma.a5 + i, ma.a5, 5); /* { dg-warning "\\\[-Warray-bounds" } */ TM (ma.a5, ma.a5 + i, ma.a5, 7); /* diagnosed with -Warray-bounds=2 */ } diff --git a/gcc/testsuite/c-c++-common/Warray-bounds-4.c b/gcc/testsuite/c-c++-common/Warray-bounds-4.c index 22a23a12651..1f73f11943f 100644 --- a/gcc/testsuite/c-c++-common/Warray-bounds-4.c +++ b/gcc/testsuite/c-c++-common/Warray-bounds-4.c @@ -43,7 +43,17 @@ void test_memcpy_bounds_memarray_range (void) TM (ma.a5, ma.a5 + j, ma.a5, 1); TM (ma.a5, ma.a5 + j, ma.a5, 3); - TM (ma.a5, ma.a5 + j, ma.a5, 5); + + /* The copy below is invalid for two reasons: 1) it overlaps and 2) it + writes past the end of ma.a5. The warning is a little cryptic here + because the GIMPLE is: + _4 = &ma.a5 + prephitmp_14; + MEM <unsigned char[5]> [(char * {ref-all})_4] + = MEM <unsigned char[5]> [(char * {ref-all})&ma]; + and could be improved. Just verify that one is issued but not its + full text. */ + TM (ma.a5, ma.a5 + j, ma.a5, 5); /* { dg-warning "\\\[-Warray-bounds" } */ + TM (ma.a5, ma.a5 + j, ma.a5, 7); /* { dg-warning "offset \\\[5, 7] from the object at .ma. is out of the bounds of referenced subobject .$MA::$?a5. with type .char ?\\\[5]. at offset 0" } */ TM (ma.a5, ma.a5 + j, ma.a5, 9); /* { dg-warning "offset \\\[5, 9] from the object at .ma. is out of the bounds of referenced subobject .$MA::$?a5. with type .char ?\\\[5]. at offset 0" } */ } diff --git a/gcc/testsuite/c-c++-common/Warray-bounds-9.c b/gcc/testsuite/c-c++-common/Warray-bounds-9.c new file mode 100644 index 00000000000..be05775fa91 --- /dev/null +++ b/gcc/testsuite/c-c++-common/Warray-bounds-9.c @@ -0,0 +1,144 @@ +/* PR tree-optimization/99121 - ICE in -Warray-bounds on a multidimensional + VLA + { dg-do compile } + { dg-options "-O2 -Wall -ftrack-macro-expansion=0" } */ + +#define NOIPA __attribute__ ((noipa)) + +void sink (void*, ...); +#define T(a, x) sink (a, x) + + +NOIPA void a_0_n (int n) +{ + int a[0][n]; + + sink (a); + + T (a, ((int *) a)[0]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((char *) a)[1]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((float *) a)[n]); // { dg-warning "\\\[-Warray-bounds" } +} + +NOIPA void a_n_0 (int n) +{ + int a[n][0]; + + sink (a); + + T (a, ((int *) a)[0]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((char *) a)[1]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((float *) a)[n]); // { dg-warning "\\\[-Warray-bounds" } +} + + +NOIPA void a_1_n_0 (int n) +{ + int a[1][n][0]; + + sink (a); + + T (a, ((int *) a)[0]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((char *) a)[1]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((float *) a)[n]); // { dg-warning "\\\[-Warray-bounds" } +} + +NOIPA void a_1_0_n (int n) +{ + int a[1][0][n]; + + sink (a); + + T (a, ((int *) a)[0]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((char *) a)[1]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((float *) a)[n]); // { dg-warning "\\\[-Warray-bounds" } +} + +NOIPA void a_0_1_n (int n) +{ + int a[0][1][n]; + + sink (a); + + T (a, ((int *) a)[0]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((char *) a)[1]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((float *) a)[n]); // { dg-warning "\\\[-Warray-bounds" } +} + +NOIPA void a_0_n_1 (int n) +{ + int a[0][n][1]; + + sink (a); + + T (a, ((int *) a)[0]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((char *) a)[1]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((float *) a)[n]); // { dg-warning "\\\[-Warray-bounds" } +} + +NOIPA void a_n_0_n (int n) +{ + int a[n][0][n]; + + sink (a); + + T (a, ((int *) a)[0]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((char *) a)[1]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((float *) a)[n]); // { dg-warning "\\\[-Warray-bounds" } +} + +NOIPA void a_n_n_0 (int n) +{ + int a[n][n][0]; + + sink (a); + + T (a, ((int *) a)[0]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((char *) a)[1]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((float *) a)[n]); // { dg-warning "\\\[-Warray-bounds" } +} + +NOIPA void a_0_n_n (int n) +{ + int a[0][n][n]; + + sink (a); + + T (a, ((int *) a)[0]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((char *) a)[1]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((float *) a)[n]); // { dg-warning "\\\[-Warray-bounds" } +} + +NOIPA void a_0_0_n (int n) +{ + int a[0][0][n]; + + sink (a); + + T (a, ((int *) a)[0]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((char *) a)[1]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((float *) a)[n]); // { dg-warning "\\\[-Warray-bounds" } +} + +NOIPA void a_n_0_0 (int n) +{ + int a[n][0][0]; + + sink (a); + + T (a, ((int *) a)[0]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((char *) a)[1]); // { dg-warning "\\\[-Warray-bounds" } + T (a, ((float *) a)[n]); // { dg-warning "\\\[-Warray-bounds" } +} + +NOIPA void a_n_n_n (int n) +{ + int a[n][n][n]; + + sink (a); + + T (a, ((int *) a)[-1]); // { dg-warning "\\\[-Warray-bounds" "pr99140" } + T (a, ((int *) a)[0]); + T (a, ((char *) a)[1]); + T (a, ((float *) a)[n]); +} diff --git a/gcc/testsuite/g++.dg/asan/asan_test.C b/gcc/testsuite/g++.dg/asan/asan_test.C index c62568f48ec..49933ab8e4d 100644 --- a/gcc/testsuite/g++.dg/asan/asan_test.C +++ b/gcc/testsuite/g++.dg/asan/asan_test.C @@ -2,7 +2,7 @@ // { dg-skip-if "" { *-*-* } { "*" } { "-O2" } } // { dg-skip-if "" { *-*-* } { "-flto" } { "" } } // { dg-additional-sources "asan_globals_test-wrapper.cc" } -// { dg-options "-std=c++11 -fsanitize=address -fno-builtin -Wall -Werror -Wno-alloc-size-larger-than -Wno-stringop-overflow -g -DASAN_UAR=0 -DASAN_HAS_EXCEPTIONS=1 -DASAN_HAS_BLACKLIST=0 -DSANITIZER_USE_DEJAGNU_GTEST=1 -lasan -lpthread" } +// { dg-options "-std=c++11 -fsanitize=address -fno-builtin -Wall -Werror -Wno-alloc-size-larger-than -Wno-array-bounds -Wno-stringop-overflow -g -DASAN_UAR=0 -DASAN_HAS_EXCEPTIONS=1 -DASAN_HAS_BLACKLIST=0 -DSANITIZER_USE_DEJAGNU_GTEST=1 -lasan -lpthread" } // { dg-additional-options "-ldl" { target { ! *-*-freebsd* } } } // { dg-additional-options "-DASAN_NEEDS_SEGV=1" { target { ! arm*-*-* } } } // { dg-additional-options "-DASAN_LOW_MEMORY=1 -DASAN_NEEDS_SEGV=0" { target arm*-*-* } } diff --git a/gcc/testsuite/g++.dg/pr95768.C b/gcc/testsuite/g++.dg/pr95768.C index 5e2c8c44ad0..d34d5133134 100644 --- a/gcc/testsuite/g++.dg/pr95768.C +++ b/gcc/testsuite/g++.dg/pr95768.C @@ -1,6 +1,6 @@ /* PR c++/95768 - pretty-printer ICE on -Wuninitialized with allocated storage { dg-do compile } - { dg-options "-O2 -Wall" } */ + { dg-options "-O2 -Wall -Wno-array-bounds" } */ </cut>

3 years, 4 months

1
0
0 0

[TCWG CI] Regression caused by gcc: phiopt: Optimize partial_ordering spaceship >= 0 -ffinite-math-only [PR94589]

by ci_notify＠linaro.org

[TCWG CI] Regression caused by gcc: phiopt: Optimize partial_ordering spaceship >= 0 -ffinite-math-only [PR94589]: commit 65061ea287a80cfb214e402cfd2373a14bfec95a Author: Jakub Jelinek <jakub(a)redhat.com> phiopt: Optimize partial_ordering spaceship >= 0 -ffinite-math-only [PR94589] Results regressed to # reset_artifacts: -10 # build_abe binutils: -9 # build_abe stage1: -5 # build_abe qemu: -2 # linux_n_obj: 33 # First few build errors in logs: # 00:01:16 cc1plus: fatal error: ./include/generated/utsrelease.h: No such file or directory # 00:01:16 cc1plus: fatal error: ./include/generated/utsrelease.h: No such file or directory # 00:01:16 cc1plus: fatal error: ./include/generated/utsrelease.h: No such file or directory # 00:01:16 make[2]: *** [scripts/gcc-plugins/stackleak_plugin.so] Error 1 # 00:01:16 make[2]: *** [scripts/gcc-plugins/latent_entropy_plugin.so] Error 1 # 00:01:16 make[2]: *** [scripts/gcc-plugins/randomize_layout_plugin.so] Error 1 # 00:01:16 make[1]: *** [scripts/gcc-plugins] Error 2 # 00:01:17 make: *** [scripts] Error 2 from # reset_artifacts: -10 # build_abe binutils: -9 # build_abe stage1: -5 # build_abe qemu: -2 # linux_n_obj: 21070 # linux build successful: all THIS IS THE END OF INTERESTING STUFF. BELOW ARE LINKS TO BUILDS, REPRODUCTION INSTRUCTIONS, AND THE RAW COMMIT. This commit has regressed these CI configurations: - tcwg_kernel/gnu-release-aarch64-next-allyesconfig First_bad build: https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-aarch64-next-a… Last_good build: https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-aarch64-next-a… Baseline build: https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-aarch64-next-a… Even more details: https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-aarch64-next-a… Reproduce builds: <cut> mkdir investigate-gcc-65061ea287a80cfb214e402cfd2373a14bfec95a cd investigate-gcc-65061ea287a80cfb214e402cfd2373a14bfec95a # Fetch scripts git clone https://git.linaro.org/toolchain/jenkins-scripts # Fetch manifests and test.sh script mkdir -p artifacts/manifests curl -o artifacts/manifests/build-baseline.sh https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-aarch64-next-a… --fail curl -o artifacts/manifests/build-parameters.sh https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-aarch64-next-a… --fail curl -o artifacts/test.sh https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-aarch64-next-a… --fail chmod +x artifacts/test.sh # Reproduce the baseline build (build all pre-requisites) ./jenkins-scripts/tcwg_kernel-build.sh @@ artifacts/manifests/build-baseline.sh # Save baseline build state (which is then restored in artifacts/test.sh) mkdir -p ./bisect rsync -a --del --delete-excluded --exclude /bisect/ --exclude /artifacts/ --exclude /gcc/ ./ ./bisect/baseline/ cd gcc # Reproduce first_bad build git checkout --detach 65061ea287a80cfb214e402cfd2373a14bfec95a ../artifacts/test.sh # Reproduce last_good build git checkout --detach b2a09773155892e426b90ce8367e2ed6996b44ef ../artifacts/test.sh cd .. </cut> Full commit (up to 1000 lines): <cut> commit 65061ea287a80cfb214e402cfd2373a14bfec95a Author: Jakub Jelinek <jakub(a)redhat.com> Date: Tue May 18 10:08:51 2021 +0200 phiopt: Optimize partial_ordering spaceship >= 0 -ffinite-math-only [PR94589] As mentioned earlier, spaceship_replacement didn't optimize partial_ordering >= 0 comparisons, because the possible values are -1, 0, 1, 2 and the >= comparison is implemented as (res & 1) == res to choose the 0 and 1 cases from that. As we optimize that only with -ffinite-math-only, the 2 case is assumed not to happen and my earlier match.pd change optimizes (res & 1) == res into (res & ~1) == 0, so this patch pattern matches that case and handles it like res >= 0. 2021-05-18 Jakub Jelinek <jakub(a)redhat.com> PR tree-optimization/94589 * tree-ssa-phiopt.c (spaceship_replacement): Pattern match phi result used in (res & ~1) == 0 comparison as res >= 0 as res == 2 would be UB with -ffinite-math-only. * g++.dg/opt/pr94589-2.C: Adjust scan-tree-dump count from 14 to 12. --- gcc/testsuite/g++.dg/opt/pr94589-2.C | 4 +- gcc/tree-ssa-phiopt.c | 72 +++++++++++++++++++++++++++++++----- 2 files changed, 65 insertions(+), 11 deletions(-) diff --git a/gcc/testsuite/g++.dg/opt/pr94589-2.C b/gcc/testsuite/g++.dg/opt/pr94589-2.C index dda947e22b1..e9ef84b1912 100644 --- a/gcc/testsuite/g++.dg/opt/pr94589-2.C +++ b/gcc/testsuite/g++.dg/opt/pr94589-2.C @@ -1,8 +1,8 @@ // PR tree-optimization/94589 // { dg-do compile { target c++20 } } // { dg-options "-O2 -g0 -ffast-math -fdump-tree-optimized" } -// { dg-final { scan-tree-dump-times "\[ij]_\[0-9]+\$D\$ (?:<|<=|==|!=|>|>=) \[ij]_\[0-9]+\$D\$" 14 "optimized" } } -// { dg-final { scan-tree-dump-times "i_\[0-9]+\$D\$ (?:<|<=|==|!=|>|>=) 5\\.0" 14 "optimized" } } +// { dg-final { scan-tree-dump-times "\[ij]_\[0-9]+\$D\$ (?:<|<=|==|!=|>|>=) \[ij]_\[0-9]+\$D\$" 12 "optimized" } } +// { dg-final { scan-tree-dump-times "i_\[0-9]+\$D\$ (?:<|<=|==|!=|>|>=) 5\\.0" 12 "optimized" } } #include <compare> diff --git a/gcc/tree-ssa-phiopt.c b/gcc/tree-ssa-phiopt.c index e0a41d41fba..8e8a08bc679 100644 --- a/gcc/tree-ssa-phiopt.c +++ b/gcc/tree-ssa-phiopt.c @@ -1887,8 +1887,9 @@ spaceship_replacement (basic_block cond_bb, basic_block middle_bb, edge e0, edge e1, gphi *phi, tree arg0, tree arg1) { - if (!INTEGRAL_TYPE_P (TREE_TYPE (PHI_RESULT (phi))) - || TYPE_UNSIGNED (TREE_TYPE (PHI_RESULT (phi))) + tree phires = PHI_RESULT (phi); + if (!INTEGRAL_TYPE_P (TREE_TYPE (phires)) + || TYPE_UNSIGNED (TREE_TYPE (phires)) || !tree_fits_shwi_p (arg0) || !tree_fits_shwi_p (arg1) || !IN_RANGE (tree_to_shwi (arg0), -1, 2) @@ -1902,12 +1903,32 @@ spaceship_replacement (basic_block cond_bb, basic_block middle_bb, use_operand_p use_p; gimple *use_stmt; - if (SSA_NAME_OCCURS_IN_ABNORMAL_PHI (PHI_RESULT (phi))) + if (SSA_NAME_OCCURS_IN_ABNORMAL_PHI (phires)) return false; - if (!single_imm_use (PHI_RESULT (phi), &use_p, &use_stmt)) + if (!single_imm_use (phires, &use_p, &use_stmt)) return false; enum tree_code cmp; tree lhs, rhs; + gimple *orig_use_stmt = use_stmt; + tree orig_use_lhs = NULL_TREE; + int prec = TYPE_PRECISION (TREE_TYPE (phires)); + if (is_gimple_assign (use_stmt) + && gimple_assign_rhs_code (use_stmt) == BIT_AND_EXPR + && TREE_CODE (gimple_assign_rhs2 (use_stmt)) == INTEGER_CST + && (wi::to_wide (gimple_assign_rhs2 (use_stmt)) + == wi::shifted_mask (1, prec - 1, false, prec))) + { + /* For partial_ordering result operator>= with unspec as second + argument is (res & 1) == res, folded by match.pd into + (res & ~1) == 0. */ + orig_use_lhs = gimple_assign_lhs (use_stmt); + if (SSA_NAME_OCCURS_IN_ABNORMAL_PHI (orig_use_lhs)) + return false; + if (EDGE_COUNT (phi_bb->preds) != 4) + return false; + if (!single_imm_use (orig_use_lhs, &use_p, &use_stmt)) + return false; + } if (gimple_code (use_stmt) == GIMPLE_COND) { cmp = gimple_cond_code (use_stmt); @@ -1948,10 +1969,19 @@ spaceship_replacement (basic_block cond_bb, basic_block middle_bb, default: return false; } - if (lhs != PHI_RESULT (phi) + if (lhs != (orig_use_lhs ? orig_use_lhs : phires) || !tree_fits_shwi_p (rhs) || !IN_RANGE (tree_to_shwi (rhs), -1, 1)) return false; + if (orig_use_lhs) + { + if ((cmp != EQ_EXPR && cmp != NE_EXPR) || !integer_zerop (rhs)) + return false; + /* As for -ffast-math we assume the 2 return to be + impossible, canonicalize (res & ~1) == 0 into + res >= 0 and (res & ~1) != 0 as res < 0. */ + cmp = cmp == EQ_EXPR ? GE_EXPR : LT_EXPR; + } if (!empty_block_p (middle_bb)) return false; @@ -2092,7 +2122,7 @@ spaceship_replacement (basic_block cond_bb, basic_block middle_bb, ? EDGE_TRUE_VALUE : EDGE_FALSE_VALUE)) == 0) return false; - /* lhs1 one_cmp rhs1 results in PHI_RESULT (phi) of 1. */ + /* lhs1 one_cmp rhs1 results in phires of 1. */ enum tree_code one_cmp; if ((cmp1 == LT_EXPR) ^ (!integer_onep ((e1->flags & EDGE_TRUE_VALUE) ? arg1 : arg0))) @@ -2185,13 +2215,29 @@ spaceship_replacement (basic_block cond_bb, basic_block middle_bb, use_operand_p use_p; imm_use_iterator iter; bool has_debug_uses = false; - FOR_EACH_IMM_USE_FAST (use_p, iter, PHI_RESULT (phi)) + FOR_EACH_IMM_USE_FAST (use_p, iter, phires) { gimple *use_stmt = USE_STMT (use_p); + if (orig_use_lhs && use_stmt == orig_use_stmt) + continue; gcc_assert (is_gimple_debug (use_stmt)); has_debug_uses = true; break; } + if (orig_use_lhs) + { + if (!has_debug_uses) + FOR_EACH_IMM_USE_FAST (use_p, iter, orig_use_lhs) + { + gimple *use_stmt = USE_STMT (use_p); + gcc_assert (is_gimple_debug (use_stmt)); + has_debug_uses = true; + } + gimple_stmt_iterator gsi = gsi_for_stmt (orig_use_stmt); + tree zero = build_zero_cst (TREE_TYPE (orig_use_lhs)); + gimple_assign_set_rhs_with_ops (&gsi, INTEGER_CST, zero); + update_stmt (orig_use_stmt); + } if (has_debug_uses) { @@ -2203,7 +2249,7 @@ spaceship_replacement (basic_block cond_bb, basic_block middle_bb, Ignore the value of 2, because if NaNs aren't expected, all floating point numbers should be comparable. */ gimple_stmt_iterator gsi = gsi_after_labels (gimple_bb (phi)); - tree type = TREE_TYPE (PHI_RESULT (phi)); + tree type = TREE_TYPE (phires); tree temp1 = make_node (DEBUG_EXPR_DECL); DECL_ARTIFICIAL (temp1) = 1; TREE_TYPE (temp1) = type; @@ -2221,10 +2267,18 @@ spaceship_replacement (basic_block cond_bb, basic_block middle_bb, t = build3 (COND_EXPR, type, t, build_zero_cst (type), temp1); g = gimple_build_debug_bind (temp2, t, phi); gsi_insert_before (&gsi, g, GSI_SAME_STMT); - replace_uses_by (PHI_RESULT (phi), temp2); + replace_uses_by (phires, temp2); + if (orig_use_lhs) + replace_uses_by (orig_use_lhs, temp2); } } + if (orig_use_lhs) + { + gimple_stmt_iterator gsi = gsi_for_stmt (orig_use_stmt); + gsi_remove (&gsi, true); + } + gimple_stmt_iterator psi = gsi_for_stmt (phi); remove_phi_node (&psi, true); </cut>

3 years, 4 months

1
0
0 0

[TCWG CI] Regression caused by gcc: c++: value-init vs zero-init in expand_aggr_init_1 [PR65816]

by ci_notify＠linaro.org

[TCWG CI] Regression caused by gcc: c++: value-init vs zero-init in expand_aggr_init_1 [PR65816]: commit ac0bc21bd634a334ba8f323c39a11f01dfdc2aae Author: Patrick Palka <ppalka(a)redhat.com> c++: value-init vs zero-init in expand_aggr_init_1 [PR65816] Results regressed to # reset_artifacts: -10 # build_abe binutils: -9 # build_abe stage1: -5 # build_abe qemu: -2 # linux_n_obj: 33 # First few build errors in logs: # 00:01:23 cc1plus: fatal error: ./include/generated/utsrelease.h: No such file or directory # 00:01:23 make[2]: *** [scripts/gcc-plugins/latent_entropy_plugin.so] Error 1 # 00:01:23 cc1plus: fatal error: ./include/generated/utsrelease.h: No such file or directory # 00:01:23 make[2]: *** [scripts/gcc-plugins/randomize_layout_plugin.so] Error 1 # 00:01:23 make[1]: *** [scripts/gcc-plugins] Error 2 # 00:01:24 make: *** [scripts] Error 2 from # reset_artifacts: -10 # build_abe binutils: -9 # build_abe stage1: -5 # build_abe qemu: -2 # linux_n_obj: 22769 THIS IS THE END OF INTERESTING STUFF. BELOW ARE LINKS TO BUILDS, REPRODUCTION INSTRUCTIONS, AND THE RAW COMMIT. This commit has regressed these CI configurations: - tcwg_kernel/gnu-release-arm-next-allmodconfig First_bad build: https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-arm-next-allmo… Last_good build: https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-arm-next-allmo… Baseline build: https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-arm-next-allmo… Even more details: https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-arm-next-allmo… Reproduce builds: <cut> mkdir investigate-gcc-ac0bc21bd634a334ba8f323c39a11f01dfdc2aae cd investigate-gcc-ac0bc21bd634a334ba8f323c39a11f01dfdc2aae # Fetch scripts git clone https://git.linaro.org/toolchain/jenkins-scripts # Fetch manifests and test.sh script mkdir -p artifacts/manifests curl -o artifacts/manifests/build-baseline.sh https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-arm-next-allmo… --fail curl -o artifacts/manifests/build-parameters.sh https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-arm-next-allmo… --fail curl -o artifacts/test.sh https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-arm-next-allmo… --fail chmod +x artifacts/test.sh # Reproduce the baseline build (build all pre-requisites) ./jenkins-scripts/tcwg_kernel-build.sh @@ artifacts/manifests/build-baseline.sh # Save baseline build state (which is then restored in artifacts/test.sh) mkdir -p ./bisect rsync -a --del --delete-excluded --exclude /bisect/ --exclude /artifacts/ --exclude /gcc/ ./ ./bisect/baseline/ cd gcc # Reproduce first_bad build git checkout --detach ac0bc21bd634a334ba8f323c39a11f01dfdc2aae ../artifacts/test.sh # Reproduce last_good build git checkout --detach 9f55df63154a39d67ef5b24def7044bf87300831 ../artifacts/test.sh cd .. </cut> Full commit (up to 1000 lines): <cut> commit ac0bc21bd634a334ba8f323c39a11f01dfdc2aae Author: Patrick Palka <ppalka(a)redhat.com> Date: Tue Jun 1 12:23:49 2021 -0400 c++: value-init vs zero-init in expand_aggr_init_1 [PR65816] In the case of value-initializing an object of class type T, [dcl.init.general]/8 says: - if T has either no default constructor ([class.default.ctor]) or a default constructor that is user-provided or deleted, then the object is default-initialized; - otherwise, the object is zero-initialized and ... if T has a non-trivial default constructor, the object is default-initialized; But when determining whether to first zero-initialize the object, expand_aggr_init_1 incorrectly considers the user-providedness of _all_ constructors rather than only that of the _default_ constructors. This causes us to skip the zero-initialization step when the class type has a defaulted default constructor alongside a user-defined constructor. It seems the predicate type_has_non_user_provided_default_constructor accurately captures the above rule for when to first perform a zero-initialization during value-initialization, so this patch adjusts expand_aggr_init_1 to use this predicate instead. PR c++/65816 gcc/cp/ChangeLog: * init.c (expand_aggr_init_1): Check type_has_non_user_provided_default_constructor instead of type_has_user_provided_constructor. gcc/testsuite/ChangeLog: * g++.dg/cpp0x/constexpr-delegating3.C: New test. * g++.dg/cpp0x/dc10.C: New test. * g++.dg/cpp0x/initlist-base4.C: New test. * g++.dg/cpp2a/constexpr-init22.C: New test. libstdc++-v3/ChangeLog: * testsuite/23_containers/deque/allocator/default_init.cc, testsuite/23_containers/forward_list/allocator/default_init.cc, testsuite/23_containers/list/allocator/default_init.cc, testsuite/23_containers/map/allocator/default_init.cc, testsuite/23_containers/set/allocator/default_init.cc, testsuite/23_containers/vector/allocator/default_init.cc, testsuite/23_containers/vector/bool/allocator/default_init.cc: Remove xfail. --- gcc/cp/init.c | 4 ++-- gcc/testsuite/g++.dg/cpp0x/constexpr-delegating3.C | 10 +++++++++ gcc/testsuite/g++.dg/cpp0x/dc10.C | 19 ++++++++++++++++ gcc/testsuite/g++.dg/cpp0x/initlist-base4.C | 26 ++++++++++++++++++++++ gcc/testsuite/g++.dg/cpp2a/constexpr-init22.C | 14 ++++++++++++ .../23_containers/deque/allocator/default_init.cc | 1 - .../forward_list/allocator/default_init.cc | 1 - .../23_containers/list/allocator/default_init.cc | 1 - .../23_containers/map/allocator/default_init.cc | 1 - .../23_containers/set/allocator/default_init.cc | 1 - .../23_containers/vector/allocator/default_init.cc | 1 - .../vector/bool/allocator/default_init.cc | 1 - 12 files changed, 71 insertions(+), 9 deletions(-) diff --git a/gcc/cp/init.c b/gcc/cp/init.c index 04d495807ef..b1123287300 100644 --- a/gcc/cp/init.c +++ b/gcc/cp/init.c @@ -2078,9 +2078,9 @@ expand_aggr_init_1 (tree binfo, tree true_exp, tree exp, tree init, int flags, that's value-initialization. */ if (init == void_type_node) { - /* If the type has data but no user-provided ctor, we need to zero + /* If the type has data but no user-provided default ctor, we need to zero out the object. */ - if (!type_has_user_provided_constructor (type) + if (type_has_non_user_provided_default_constructor (type) && !is_really_empty_class (type, /*ignore_vptr*/true)) { tree field_size = NULL_TREE; diff --git a/gcc/testsuite/g++.dg/cpp0x/constexpr-delegating3.C b/gcc/testsuite/g++.dg/cpp0x/constexpr-delegating3.C new file mode 100644 index 00000000000..2263ec89488 --- /dev/null +++ b/gcc/testsuite/g++.dg/cpp0x/constexpr-delegating3.C @@ -0,0 +1,10 @@ +// PR c++/65816 +// { dg-do compile { target c++11 } } + +struct test { + int m; + test() = default; + constexpr test(int) : test() {} +}; + +static_assert(test(0).m == 0, ""); diff --git a/gcc/testsuite/g++.dg/cpp0x/dc10.C b/gcc/testsuite/g++.dg/cpp0x/dc10.C new file mode 100644 index 00000000000..c008a1703e8 --- /dev/null +++ b/gcc/testsuite/g++.dg/cpp0x/dc10.C @@ -0,0 +1,19 @@ +// PR c++/65816 +// { dg-do run { target c++11 } } + +void* operator new(decltype(sizeof(int)), void* ptr) { return ptr; } + +struct test { + int i; + test() = default; + test(int) : test() {} +}; + +int main() { + alignas(test) unsigned char space[sizeof(test)]; + for (auto& c : space) c = 0xff; + + auto ptr = ::new(&space) test(42); + int& i = static_cast<test&>(*ptr).i; + if (i != 0) __builtin_abort(); +} diff --git a/gcc/testsuite/g++.dg/cpp0x/initlist-base4.C b/gcc/testsuite/g++.dg/cpp0x/initlist-base4.C new file mode 100644 index 00000000000..4a02af92799 --- /dev/null +++ b/gcc/testsuite/g++.dg/cpp0x/initlist-base4.C @@ -0,0 +1,26 @@ +// PR c++/65816 +// { dg-do run { target c++11 } } + +void* operator new(decltype(sizeof(int)), void* ptr) { return ptr; } + +struct item { int i; }; + +struct collector : item { + int j; + collector() = default; + collector(int) {} +}; + +struct tuple : collector { + tuple() : collector() {} +}; + +int main() { + alignas(tuple) unsigned char space[sizeof(tuple)]; + for (auto& c : space) c = 0xff; + + auto ptr = ::new(&space) tuple; + int& i = static_cast<tuple&>(*ptr).i; + int& j = static_cast<tuple&>(*ptr).j; + if (i != 0 || j != 0) __builtin_abort(); +} diff --git a/gcc/testsuite/g++.dg/cpp2a/constexpr-init22.C b/gcc/testsuite/g++.dg/cpp2a/constexpr-init22.C new file mode 100644 index 00000000000..50e4a95dbda --- /dev/null +++ b/gcc/testsuite/g++.dg/cpp2a/constexpr-init22.C @@ -0,0 +1,14 @@ +// PR c++/65816 +// { dg-do compile { target c++20 } } + +struct X { + int i; + X() = default; + constexpr X(int) { } +}; + +struct Y : X { + constexpr Y() : X() { } +}; + +static_assert(Y().i == 0); diff --git a/libstdc++-v3/testsuite/23_containers/deque/allocator/default_init.cc b/libstdc++-v3/testsuite/23_containers/deque/allocator/default_init.cc index f51cc5b49b9..9428206f2ef 100644 --- a/libstdc++-v3/testsuite/23_containers/deque/allocator/default_init.cc +++ b/libstdc++-v3/testsuite/23_containers/deque/allocator/default_init.cc @@ -17,7 +17,6 @@ // { dg-do run { target c++11 } } // { dg-options "-O0" } -// { dg-xfail-run-if "PR c++/65816" { *-*-* } } #include <deque> #include <testsuite_hooks.h> diff --git a/libstdc++-v3/testsuite/23_containers/forward_list/allocator/default_init.cc b/libstdc++-v3/testsuite/23_containers/forward_list/allocator/default_init.cc index a60192641d4..4298fa5ffa5 100644 --- a/libstdc++-v3/testsuite/23_containers/forward_list/allocator/default_init.cc +++ b/libstdc++-v3/testsuite/23_containers/forward_list/allocator/default_init.cc @@ -17,7 +17,6 @@ // { dg-do run { target c++11 } } // { dg-options "-O0" } -// { dg-xfail-run-if "PR c++/65816" { *-*-* } } #include <forward_list> #include <testsuite_hooks.h> diff --git a/libstdc++-v3/testsuite/23_containers/list/allocator/default_init.cc b/libstdc++-v3/testsuite/23_containers/list/allocator/default_init.cc index 62bfd78df18..03d8cfc89e8 100644 --- a/libstdc++-v3/testsuite/23_containers/list/allocator/default_init.cc +++ b/libstdc++-v3/testsuite/23_containers/list/allocator/default_init.cc @@ -17,7 +17,6 @@ // { dg-do run { target c++11 } } // { dg-options "-O0" } -// { dg-xfail-run-if "PR c++/65816" { *-*-* } } #include <list> #include <testsuite_hooks.h> diff --git a/libstdc++-v3/testsuite/23_containers/map/allocator/default_init.cc b/libstdc++-v3/testsuite/23_containers/map/allocator/default_init.cc index bc9027703fc..6e3f36d60a4 100644 --- a/libstdc++-v3/testsuite/23_containers/map/allocator/default_init.cc +++ b/libstdc++-v3/testsuite/23_containers/map/allocator/default_init.cc @@ -17,7 +17,6 @@ // { dg-do run { target c++11 } } // { dg-options "-O0" } -// { dg-xfail-run-if "PR c++/65816" { *-*-* } } #include <map> #include <testsuite_hooks.h> diff --git a/libstdc++-v3/testsuite/23_containers/set/allocator/default_init.cc b/libstdc++-v3/testsuite/23_containers/set/allocator/default_init.cc index 8a99b491c25..b031cb81504 100644 --- a/libstdc++-v3/testsuite/23_containers/set/allocator/default_init.cc +++ b/libstdc++-v3/testsuite/23_containers/set/allocator/default_init.cc @@ -17,7 +17,6 @@ // { dg-do run { target c++11 } } // { dg-options "-O0" } -// { dg-xfail-run-if "PR c++/65816" { *-*-* } } #include <set> #include <testsuite_hooks.h> diff --git a/libstdc++-v3/testsuite/23_containers/vector/allocator/default_init.cc b/libstdc++-v3/testsuite/23_containers/vector/allocator/default_init.cc index c16d3b046e4..4673db71b6c 100644 --- a/libstdc++-v3/testsuite/23_containers/vector/allocator/default_init.cc +++ b/libstdc++-v3/testsuite/23_containers/vector/allocator/default_init.cc @@ -17,7 +17,6 @@ // { dg-do run { target c++11 } } // { dg-options "-O0" } -// { dg-xfail-run-if "PR c++/65816" { *-*-* } } #include <vector> #include <testsuite_hooks.h> diff --git a/libstdc++-v3/testsuite/23_containers/vector/bool/allocator/default_init.cc b/libstdc++-v3/testsuite/23_containers/vector/bool/allocator/default_init.cc index 4111e3ac3eb..61cc7859d74 100644 --- a/libstdc++-v3/testsuite/23_containers/vector/bool/allocator/default_init.cc +++ b/libstdc++-v3/testsuite/23_containers/vector/bool/allocator/default_init.cc @@ -17,7 +17,6 @@ // { dg-do run { target c++11 } } // { dg-options "-O0" } -// { dg-xfail-run-if "PR c++/65816" { *-*-* } } #include <vector> #include <testsuite_hooks.h> </cut>

3 years, 4 months

1
0
0 0

[TCWG CI] Regression caused by gcc: Fold sign of LSHIFT_EXPR to eliminate no-op conversions.

by ci_notify＠linaro.org

[TCWG CI] Regression caused by gcc: Fold sign of LSHIFT_EXPR to eliminate no-op conversions.: commit 1d244020246cb155e4de62ca3b302b920a1f513f Author: Roger Sayle <roger(a)nextmovesoftware.com> Fold sign of LSHIFT_EXPR to eliminate no-op conversions. Results regressed to # reset_artifacts: -10 # build_abe binutils: -9 # build_abe stage1: -5 # build_abe qemu: -2 # linux_n_obj: 22170 # First few build errors in logs: # 00:17:02 drivers/gpu/drm/amd/amdgpu/amdgpu.h:1238:53: error: ‘<<’ in boolean context, did you mean ‘<’? [-Werror=int-in-bool-context] # 00:17:03 make[4]: *** [drivers/gpu/drm/amd/amdgpu/gmc_v6_0.o] Error 1 # 00:23:50 drivers/net/wireless/intel/iwlwifi/mvm/tx.c:2226:1: error: type mismatch in ‘lshift_expr’ # 00:23:50 drivers/net/wireless/intel/iwlwifi/mvm/tx.c:2226:1: internal compiler error: verify_gimple failed # 00:23:50 make[6]: *** [drivers/net/wireless/intel/iwlwifi/mvm/tx.o] Error 1 # 00:24:56 make[5]: *** [drivers/net/wireless/intel/iwlwifi/mvm] Error 2 # 00:26:51 make[4]: *** [drivers/net/wireless/intel/iwlwifi] Error 2 # 00:26:51 make[3]: *** [drivers/net/wireless/intel] Error 2 # 00:29:27 make[2]: *** [drivers/net/wireless] Error 2 # 00:34:08 make[3]: *** [drivers/gpu/drm/amd/amdgpu] Error 2 from # reset_artifacts: -10 # build_abe binutils: -9 # build_abe stage1: -5 # build_abe qemu: -2 # linux_n_obj: 30479 # linux build successful: all THIS IS THE END OF INTERESTING STUFF. BELOW ARE LINKS TO BUILDS, REPRODUCTION INSTRUCTIONS, AND THE RAW COMMIT. This commit has regressed these CI configurations: - tcwg_kernel/gnu-release-arm-stable-allmodconfig First_bad build: https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-arm-stable-all… Last_good build: https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-arm-stable-all… Baseline build: https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-arm-stable-all… Even more details: https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-arm-stable-all… Reproduce builds: <cut> mkdir investigate-gcc-1d244020246cb155e4de62ca3b302b920a1f513f cd investigate-gcc-1d244020246cb155e4de62ca3b302b920a1f513f # Fetch scripts git clone https://git.linaro.org/toolchain/jenkins-scripts # Fetch manifests and test.sh script mkdir -p artifacts/manifests curl -o artifacts/manifests/build-baseline.sh https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-arm-stable-all… --fail curl -o artifacts/manifests/build-parameters.sh https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-arm-stable-all… --fail curl -o artifacts/test.sh https://ci.linaro.org/job/tcwg_kernel-gnu-bisect-gnu-release-arm-stable-all… --fail chmod +x artifacts/test.sh # Reproduce the baseline build (build all pre-requisites) ./jenkins-scripts/tcwg_kernel-build.sh @@ artifacts/manifests/build-baseline.sh # Save baseline build state (which is then restored in artifacts/test.sh) mkdir -p ./bisect rsync -a --del --delete-excluded --exclude /bisect/ --exclude /artifacts/ --exclude /gcc/ ./ ./bisect/baseline/ cd gcc # Reproduce first_bad build git checkout --detach 1d244020246cb155e4de62ca3b302b920a1f513f ../artifacts/test.sh # Reproduce last_good build git checkout --detach b320edc0c29c838b0090c3c9be14187d132f73f2 ../artifacts/test.sh cd .. </cut> Full commit (up to 1000 lines): <cut> commit 1d244020246cb155e4de62ca3b302b920a1f513f Author: Roger Sayle <roger(a)nextmovesoftware.com> Date: Mon Aug 23 12:37:04 2021 +0100 Fold sign of LSHIFT_EXPR to eliminate no-op conversions. This short patch teaches fold that it is "safe" to change the sign of a left shift, to reduce the number of type conversions in gimple. As an example: unsigned int foo(unsigned int i) { return (int)i << 8; } is currently optimized to: unsigned int foo (unsigned int i) { int i.0_1; int _2; unsigned int _4; <bb 2> [local count: 1073741824]: i.0_1 = (int) i_3(D); _2 = i.0_1 << 8; _4 = (unsigned int) _2; return _4; } with this patch, this now becomes: unsigned int foo (unsigned int i) { unsigned int _2; <bb 2> [local count: 1073741824]: _2 = i_1(D) << 8; return _2; } which generates exactly the same assembly language. Aside from the reduced memory usage, the real benefit is that no-op conversions tend to interfere with many folding optimizations. For example, unsigned int bar(unsigned char i) { return (i ^ (i<<16)) | (i<<8); } currently gets (tangled in conversions and) optimized to: unsigned int bar (unsigned char i) { unsigned int _1; unsigned int _2; int _3; int _4; unsigned int _6; unsigned int _8; <bb 2> [local count: 1073741824]: _1 = (unsigned int) i_5(D); _2 = _1 * 65537; _3 = (int) i_5(D); _4 = _3 << 8; _8 = (unsigned int) _4; _6 = _2 | _8; return _6; } but with this patch, bar now optimizes down to: unsigned int bar(unsigned char i) { unsigned int _1; unsigned int _4; <bb 2> [local count: 1073741824]: _1 = (unsigned int) i_3(D); _4 = _1 * 65793; return _4; } 2021-08-23 Roger Sayle <roger(a)nextmovesoftware.com> gcc/ChangeLog * match.pd (shift transformations): Change the sign of an LSHIFT_EXPR if it reduces the number of explicit conversions. gcc/testsuite/ChangeLog * gcc.dg/fold-convlshift-1.c: New test case. * gcc.dg/fold-convlshift-2.c: New test case. --- gcc/match.pd | 9 +++++++++ gcc/testsuite/gcc.dg/fold-convlshift-1.c | 20 ++++++++++++++++++++ gcc/testsuite/gcc.dg/fold-convlshift-2.c | 20 ++++++++++++++++++++ 3 files changed, 49 insertions(+) diff --git a/gcc/match.pd b/gcc/match.pd index 0fcfd0ea62c..978a1b0172e 100644 --- a/gcc/match.pd +++ b/gcc/match.pd @@ -3385,6 +3385,15 @@ DEFINE_INT_AND_FLOAT_ROUND_FN (RINT) (if (integer_zerop (@2) || integer_all_onesp (@2)) (cmp @0 @2))))) +/* Both signed and unsigned lshift produce the same result, so use + the form that minimizes the number of conversions. */ +(simplify + (convert (lshift:s@0 (convert:s@1 @2) INTEGER_CST@3)) + (if (tree_nop_conversion_p (type, TREE_TYPE (@0)) + && INTEGRAL_TYPE_P (TREE_TYPE (@2)) + && TYPE_PRECISION (TREE_TYPE (@2)) <= TYPE_PRECISION (type)) + (lshift (convert @2) @3))) + /* Simplifications of conversions. */ /* Basic strip-useless-type-conversions / strip_nops. */ diff --git a/gcc/testsuite/gcc.dg/fold-convlshift-1.c b/gcc/testsuite/gcc.dg/fold-convlshift-1.c new file mode 100644 index 00000000000..b6f57f81e72 --- /dev/null +++ b/gcc/testsuite/gcc.dg/fold-convlshift-1.c @@ -0,0 +1,20 @@ +/* { dg-do compile } */ +/* { dg-options "-O2 -fdump-tree-optimized" } */ + +unsigned int foo(unsigned int i) +{ + int t1 = i; + int t2 = t1 << 8; + return t2; +} + +int bar(int i) +{ + unsigned int t1 = i; + unsigned int t2 = t1 << 8; + return t2; +} + +/* { dg-final { scan-tree-dump-not "\$int\$" "optimized" } } */ +/* { dg-final { scan-tree-dump-not "\$unsigned int\$" "optimized" } } */ + diff --git a/gcc/testsuite/gcc.dg/fold-convlshift-2.c b/gcc/testsuite/gcc.dg/fold-convlshift-2.c new file mode 100644 index 00000000000..f21358c4584 --- /dev/null +++ b/gcc/testsuite/gcc.dg/fold-convlshift-2.c @@ -0,0 +1,20 @@ +/* { dg-do compile } */ +/* { dg-options "-O2 -fdump-tree-optimized" } */ + +unsigned int foo(unsigned char c) +{ + int t1 = c; + int t2 = t1 << 8; + return t2; +} + +int bar(unsigned char c) +{ + unsigned int t1 = c; + unsigned int t2 = t1 << 8; + return t2; +} + +/* { dg-final { scan-tree-dump-times "\$int\$" 1 "optimized" } } */ +/* { dg-final { scan-tree-dump-times "\$unsigned int\$" 1 "optimized" } } */ + </cut>

3 years, 4 months

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

linaro-toolchain