linaro-toolchain

linaro-toolchain@lists.linaro.org

1 participants
5666 discussions

by Andrew Stubbs

Hi Matthias, GCC 4.7.0 has branched upstream. SVN trunk is now 4.8. Could you please create lp:gcc/4.7 from the release branch. Thanks Andrew

13 years, 10 months

Please pull upstream rev. 184603 into gcc-linaro 4.7

by Bernhard Rosenkränzer

Hi, 184603 fixes an ICE we're running into with Android test builds. Please pull it in ASAP so I don't have to mess with the CFLAGS as a workaround. ttyl bero

13 years, 10 months

Cross toolchain for lucid updated

by Marcin Juszkiewicz

Linaro cross toolchain backport PPA [1] got updated to recent Ubuntu 12.04 versions: - gcc 4.5.3 - gcc 4.6.2 - binutils 2.22 - eglibc 2.15 - linux 3.2 I tested both compiler versions against few packages, U-Boot and Linux 2.6.32. Those packages may also work under Ubuntu 10.10 'maverick' and 11.04 'natty' but it was not tested. Users of Ubuntu 11.10 'oneiric' may install libmpfr1ldbl package [2] and then use 'lucid' repository to install cross compiler while I will prepare packages for their version of Ubuntu. Please report any problems with those backported packages in launchpad [3][4][5]. 1. https://launchpad.net/~linaro-maintainers/+archive/toolchain 2. http://packages.ubuntu.com/lucid/libmpfr1ldbl 3. https://launchpad.net/ubuntu/+source/gcc-4.5-armel-cross/+bugs 4. https://launchpad.net/ubuntu/+source/gcc-4.5-armel-cross/+bugs 5. https://launchpad.net/ubuntu/+source/armel-cross-toolchain-base/+bugs

13 years, 10 months

Status call number is unchanged

by Michael Hope

No news yet on the new conference call numbers. Let's see if the old numbers still work. -- Michael

13 years, 10 months

Spec 2000 broken?

by Andrew Stubbs

Hi Michael, I ran the benchmark tests on GCC 4.7, but the spec2000 run seems to have failed. This is both on the baseline, and on my patch. See here: http://ex.seabright.co.nz/benchmarks/gcc-linaro-4.7%2bbzr114968~ams-codesou… Andrew

13 years, 10 months

Saturated operations

by Michael Hope

Hi Ulrich. The saturated work you're doing at the moment - is it the saturated add/subtract QADD/QSUB/QDADD/QDSUB or the ARMv6 saturate-word-with-shift SSAT/USAT? I've updated the old blueprint and added a new one for SSAT/USAT: https://blueprints.launchpad.net/gcc-linaro/+spec/armv6-saturation-instruct… https://blueprints.launchpad.net/gcc-linaro/+spec/armv5-saturated-ops and was wondering which to put against your name. -- Michael

13 years, 10 months

Fleshing out the QEMU blueprints

by Michael Hope

Hi Peter, Rusty. I've fleshed out the KVM blueprints a bit more at: https://wiki.linaro.org/MichaelHope/Sandbox/Q1.12ToDo Notable is adding validation and de-PENDING a few things. I need to know the following things before talking to Validation and Platforms about things that are in their queue: * What's the host kernel? Christoffers, or a linux-linaro-kvm based off his plus work in progress? * What's the guest kernel? * Anything special that needs to be in the host rootfs outside qemu and libvirt? Do you have a host and guest kernel .config that I can pass on to Platforms? -- Michael

13 years, 10 months

[ACTIVITY] Feb 20 - Feb 24

by Thiago Jung Bauermann

Hi, GDB on Android: * Set up cross compiling environment using both the Android toolchain and the Linaro toolchain. * Tested Android and Mozilla GDB running as a native binary on the Linaro Android image on qemu. None of them were able to see all threads in a multi-threaded process. The same happens with a native binary on Android talking to a gdbserver on localhost. * I was able to produce an Android GDB 7.1.x binary which when running on an i386 host talking to the Android SDK emulator sees all threads. It is not able to generate a backtrace though. * Carnival holidays. -- []'s Thiago Jung Bauermann Linaro Toolchain Working Group

13 years, 10 months

[ACTIVITY] 20th - 24th February

by Andrew Stubbs

Investigated and produced and patch for bug lp936863. Continued work on 64-bit shifts. I updated my neon shifts patch twice: once to take -Os optimization into account, and once because I noticed that the CC clobbers were being retained even after they were known to be not required, and presumably this could be a bad thing. Posted a patch to improve SI->DImode sign- and zero-extends that also move values from core registers to neon registers. Wrote a patch to implement negation in neon register, albeit at the cost of a scratch register to hold the constant zero. This worked, but insisted on loading the zero from memory, despite the fact that NEON has a suitable instruction for loading zero. Attempted to get "vmov dN, #0" to work. The problem appears to be that DImode loads are handled by the VFP load pattern in vfp.md and that that doesn't seem to DTRT for integer constants. I've got as far as trying to figure out what it does do, but there's more to be done to get to the bottom of the problem. Tried to get the benchmarking going for 64-bit shifts. Unfortunately ursa1 has been experiencing outages. Michael has been trying to fix it, but so far I've not been able to run anything there. Instead, I've launched benchmark runs via Michael's normal test infrastructure. Hopefully this can replace the manual ones anyway. That would be more convenient.

13 years, 10 months

Running pre-built linaro toolchain failed on Ubuntu 11.04, 64bit server

by Lv Terry-R65388

Hi, I'm trying to use pre-built version of linaro toolchain for cross-compiler in Ubuntu 11.04 on our 64bit server. I got it from http://people.linaro.org/~michaelh/incoming/binaries/. When I run arm-linux-gnueabi-gcc to compile a c source, it says "No such file or directory". The steps are as below: 1. Unpack gcc-linaro-arm-linux-gnueabi-2011.12-20111219+bzr2309~linux.tar.bz2. 2. Rename gcc-linaro-arm-linux-gnueabi-2011.12-20111219+bzr2309~linux to arm-fsl-linux-gnueabi. 3. Copy to ~/toolchain_ltib/gcc-linaro-4.6.3-glibc-2.13-singlelib-2011.12/ 2. Use arm-linux-gnueabi-gcc to compile my code. The output is: r65388@shlinux3:~/MEMCPYBM$ ~/toolchain_ltib/gcc-linaro-4.6.3-glibc-2.13-singlelib-2011.12/arm-fsl-linux-gnueabi/bin/arm-linux-gnueabi-gcc -bash: /home/r65388/toolchain_ltib/gcc-linaro-4.6.3-glibc-2.13-singlelib-2011.12/arm-fsl-linux-gnueabi/bin/arm-linux-gnueabi-gcc: No such file or directory I have installed lsb 4.0 and libc6 2.13. r65388@shlinux3:~/MEMCPYBM$ dpkg -s lsb Package: lsb Status: install ok installed Priority: extra Section: misc Installed-Size: 48 Maintainer: Ubuntu Developers <ubuntu-devel-discuss(a)lists.ubuntu.com> Architecture: all Version: 4.0-0ubuntu16 ... r65388@shlinux3:~/MEMCPYBM$ dpkg -s libc6-dev Package: libc6-dev Status: install ok installed Multi-Arch: same Priority: optional Section: libdevel Installed-Size: 11888 Maintainer: Ubuntu Developers <ubuntu-devel-discuss(a)lists.ubuntu.com> Architecture: amd64 Source: eglibc Version: 2.13-20ubuntu5 Provides: libc-dev Depends: libc6 (= 2.13-20ubuntu5), libc-dev-bin (= 2.13-20ubuntu5), linux-libc-dev Recommends: gcc | c-compiler Suggests: glibc-doc, manpages-dev Breaks: binutils (<< 2.20.1-1), binutils-gold (<< 2.20.1-11), cmake (<< 2.8.4+dfsg.1-5), gcc-4.4 (<< 4.4.6-3ubuntu1), gcc-4.4-base (<< 4.4.6-3ubuntu1), gcc-4.5 (<< 4.5.3-1ubuntu2), gcc-4.5-base (<< 4.5.3-1ubuntu2), gcc-4.6 (<< 4.6.0-12), gcj-4.4-base (<< 4.4.6-2ubuntu2), gcj-4.5-base (<< 4.5.3-1ubuntu2), gnat-4.4-base (<< 4.4.6-1ubuntu3), libhwloc-dev (<< 1.2-3), libjna-java (<< 3.2.7-4), liblouis-dev (<< 2.3.0-2), liblouisxml-dev (<< 2.4.0-2), make (<< 3.81-8.1), pkg-config (<< 0.26-1) ... Do you know why? How can I fix this issue? Thanks~~ Yours Terry

13 years, 10 months

Jump to page:

2026

2025

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

linaro-toolchain