After llvm commit c93f93b2e3f28997f794265089fb8138dd5b5f13 Author: Jun Ma JunMa@linux.alibaba.com

Revert "Revert "Recommit "Revert "[CVP] processSwitch: Remove default case when switch cover all possible values.""""

the following benchmarks grew in size by more than 1%: - 401.bzip2 grew in size by 4% from 36134 to 37534 bytes - 401.bzip2:[.] BZ2_decompress grew in size by 19% from 7256 to 8656 bytes

Below reproducer instructions can be used to re-build both "first_bad" and "last_good" cross-toolchains used in this bisection. Naturally, the scripts will fail when triggerring benchmarking jobs if you don't have access to Linaro TCWG CI.

For your convenience, we have uploaded tarballs with pre-processed source and assembly files at: - First_bad save-temps: https://ci.linaro.org/job/tcwg_bmk_ci_llvm-bisect-tcwg_bmk_apm-llvm-master-a... - Last_good save-temps: https://ci.linaro.org/job/tcwg_bmk_ci_llvm-bisect-tcwg_bmk_apm-llvm-master-a... - Baseline save-temps: https://ci.linaro.org/job/tcwg_bmk_ci_llvm-bisect-tcwg_bmk_apm-llvm-master-a...

Configuration: - Benchmark: SPEC CPU2006 - Toolchain: Clang + Glibc + LLVM Linker - Version: all components were built from their tip of trunk - Target: arm-linux-gnueabihf - Compiler flags: -Oz -mthumb - Hardware: APM Mustang 8x X-Gene1

This benchmarking CI is work-in-progress, and we welcome feedback and suggestions at linaro-toolchain@lists.linaro.org . In our improvement plans is to add support for SPEC CPU2017 benchmarks and provide "perf report/annotate" data behind these reports.

THIS IS THE END OF INTERESTING STUFF. BELOW ARE LINKS TO BUILDS, REPRODUCTION INSTRUCTIONS, AND THE RAW COMMIT.

This commit has regressed these CI configurations: - tcwg_bmk_llvm_apm/llvm-master-arm-spec2k6-Oz

First_bad build: https://ci.linaro.org/job/tcwg_bmk_ci_llvm-bisect-tcwg_bmk_apm-llvm-master-a... Last_good build: https://ci.linaro.org/job/tcwg_bmk_ci_llvm-bisect-tcwg_bmk_apm-llvm-master-a... Baseline build: https://ci.linaro.org/job/tcwg_bmk_ci_llvm-bisect-tcwg_bmk_apm-llvm-master-a... Even more details: https://ci.linaro.org/job/tcwg_bmk_ci_llvm-bisect-tcwg_bmk_apm-llvm-master-a...

Reproduce builds: <cut> mkdir investigate-llvm-c93f93b2e3f28997f794265089fb8138dd5b5f13 cd investigate-llvm-c93f93b2e3f28997f794265089fb8138dd5b5f13

# Fetch scripts git clone https://git.linaro.org/toolchain/jenkins-scripts

# Fetch manifests and test.sh script mkdir -p artifacts/manifests curl -o artifacts/manifests/build-baseline.sh https://ci.linaro.org/job/tcwg_bmk_ci_llvm-bisect-tcwg_bmk_apm-llvm-master-a... --fail curl -o artifacts/manifests/build-parameters.sh https://ci.linaro.org/job/tcwg_bmk_ci_llvm-bisect-tcwg_bmk_apm-llvm-master-a... --fail curl -o artifacts/test.sh https://ci.linaro.org/job/tcwg_bmk_ci_llvm-bisect-tcwg_bmk_apm-llvm-master-a... --fail chmod +x artifacts/test.sh

# Reproduce the baseline build (build all pre-requisites) ./jenkins-scripts/tcwg_bmk-build.sh @@ artifacts/manifests/build-baseline.sh

# Save baseline build state (which is then restored in artifacts/test.sh) mkdir -p ./bisect rsync -a --del --delete-excluded --exclude /bisect/ --exclude /artifacts/ --exclude /llvm/ ./ ./bisect/baseline/

cd llvm

# Reproduce first_bad build git checkout --detach c93f93b2e3f28997f794265089fb8138dd5b5f13 ../artifacts/test.sh

# Reproduce last_good build git checkout --detach b4fb42300e39c99ac5bb9d02b304b713fabdec4d ../artifacts/test.sh

cd .. </cut>

Full commit (up to 1000 lines): <cut> commit c93f93b2e3f28997f794265089fb8138dd5b5f13 Author: Jun Ma JunMa@linux.alibaba.com Date: Tue Sep 28 09:44:00 2021 +0800

Revert "Revert "Recommit "Revert "[CVP] processSwitch: Remove default case when switch cover all possible values.""""

This reverts commit 3a998c06a8e93989319238e12b56a731198cc1c2. --- llvm/include/llvm/Transforms/Utils/Local.h | 5 ++++ .../Scalar/CorrelatedValuePropagation.cpp | 27 +++++++++++++++++++++- llvm/lib/Transforms/Utils/Local.cpp | 20 ++++++++++++++++ llvm/lib/Transforms/Utils/SimplifyCFG.cpp | 20 ---------------- .../Transforms/CorrelatedValuePropagation/basic.ll | 11 +++++---- 5 files changed, 57 insertions(+), 26 deletions(-)

diff --git a/llvm/include/llvm/Transforms/Utils/Local.h b/llvm/include/llvm/Transforms/Utils/Local.h index 3c529abce85a..72cb606eb51a 100644 --- a/llvm/include/llvm/Transforms/Utils/Local.h +++ b/llvm/include/llvm/Transforms/Utils/Local.h @@ -55,6 +55,7 @@ class MDNode; class MemorySSAUpdater; class PHINode; class StoreInst; +class SwitchInst; class TargetLibraryInfo; class TargetTransformInfo;

@@ -237,6 +238,10 @@ CallInst *createCallMatchingInvoke(InvokeInst *II); /// This function converts the specified invoek into a normall call. void changeToCall(InvokeInst *II, DomTreeUpdater *DTU = nullptr);

+/// This function removes the default destination from the specified switch. +void createUnreachableSwitchDefault(SwitchInst *Switch, + DomTreeUpdater *DTU = nullptr); + ///===---------------------------------------------------------------------===// /// Dbg Intrinsic utilities /// diff --git a/llvm/lib/Transforms/Scalar/CorrelatedValuePropagation.cpp b/llvm/lib/Transforms/Scalar/CorrelatedValuePropagation.cpp index 6dbd3da24059..4b8392db9628 100644 --- a/llvm/lib/Transforms/Scalar/CorrelatedValuePropagation.cpp +++ b/llvm/lib/Transforms/Scalar/CorrelatedValuePropagation.cpp @@ -341,7 +341,13 @@ static bool processSwitch(SwitchInst *I, LazyValueInfo *LVI, // ConstantFoldTerminator() as the underlying SwitchInst can be changed. SwitchInstProfUpdateWrapper SI(*I);

- for (auto CI = SI->case_begin(), CE = SI->case_end(); CI != CE;) { + APInt Low = + APInt::getSignedMaxValue(Cond->getType()->getScalarSizeInBits()); + APInt High = + APInt::getSignedMinValue(Cond->getType()->getScalarSizeInBits()); + + SwitchInst::CaseIt CI = SI->case_begin(); + for (auto CE = SI->case_end(); CI != CE;) { ConstantInt *Case = CI->getCaseValue(); LazyValueInfo::Tristate State = LVI->getPredicateAt(CmpInst::ICMP_EQ, Cond, Case, I, @@ -374,9 +380,28 @@ static bool processSwitch(SwitchInst *I, LazyValueInfo *LVI, break; }

+ // Get Lower/Upper bound from switch cases. + Low = APIntOps::smin(Case->getValue(), Low); + High = APIntOps::smax(Case->getValue(), High); + // Increment the case iterator since we didn't delete it. ++CI; } + + // Try to simplify default case as unreachable + if (CI == SI->case_end() && SI->getNumCases() != 0 && + !isa<UnreachableInst>(SI->getDefaultDest()->getFirstNonPHIOrDbg())) { + const ConstantRange SIRange = + LVI->getConstantRange(SI->getCondition(), SI); + + // If the numbered switch cases cover the entire range of the condition, + // then the default case is not reachable. + if (SIRange.getSignedMin() == Low && SIRange.getSignedMax() == High && + SI->getNumCases() == High - Low + 1) { + createUnreachableSwitchDefault(SI, &DTU); + Changed = true; + } + } }

if (Changed) diff --git a/llvm/lib/Transforms/Utils/Local.cpp b/llvm/lib/Transforms/Utils/Local.cpp index 3e36f498523d..74ab37fadf36 100644 --- a/llvm/lib/Transforms/Utils/Local.cpp +++ b/llvm/lib/Transforms/Utils/Local.cpp @@ -2190,6 +2190,26 @@ void llvm::changeToCall(InvokeInst *II, DomTreeUpdater *DTU) { DTU->applyUpdates({{DominatorTree::Delete, BB, UnwindDestBB}}); }

+void llvm::createUnreachableSwitchDefault(SwitchInst *Switch, + DomTreeUpdater *DTU) { + LLVM_DEBUG(dbgs() << "SimplifyCFG: switch default is dead.\n"); + auto *BB = Switch->getParent(); + auto *OrigDefaultBlock = Switch->getDefaultDest(); + OrigDefaultBlock->removePredecessor(BB); + BasicBlock *NewDefaultBlock = BasicBlock::Create( + BB->getContext(), BB->getName() + ".unreachabledefault", BB->getParent(), + OrigDefaultBlock); + new UnreachableInst(Switch->getContext(), NewDefaultBlock); + Switch->setDefaultDest(&*NewDefaultBlock); + if (DTU) { + SmallVector<DominatorTree::UpdateType, 2> Updates; + Updates.push_back({DominatorTree::Insert, BB, &*NewDefaultBlock}); + if (!is_contained(successors(BB), OrigDefaultBlock)) + Updates.push_back({DominatorTree::Delete, BB, &*OrigDefaultBlock}); + DTU->applyUpdates(Updates); + } +} + BasicBlock *llvm::changeToInvokeAndSplitBasicBlock(CallInst *CI, BasicBlock *UnwindEdge, DomTreeUpdater *DTU) { diff --git a/llvm/lib/Transforms/Utils/SimplifyCFG.cpp b/llvm/lib/Transforms/Utils/SimplifyCFG.cpp index 7b49f47778e0..3eab293b433e 100644 --- a/llvm/lib/Transforms/Utils/SimplifyCFG.cpp +++ b/llvm/lib/Transforms/Utils/SimplifyCFG.cpp @@ -4782,26 +4782,6 @@ static bool CasesAreContiguous(SmallVectorImpl<ConstantInt *> &Cases) { return true; }

-static void createUnreachableSwitchDefault(SwitchInst *Switch, - DomTreeUpdater *DTU) { - LLVM_DEBUG(dbgs() << "SimplifyCFG: switch default is dead.\n"); - auto *BB = Switch->getParent(); - auto *OrigDefaultBlock = Switch->getDefaultDest(); - OrigDefaultBlock->removePredecessor(BB); - BasicBlock *NewDefaultBlock = BasicBlock::Create( - BB->getContext(), BB->getName() + ".unreachabledefault", BB->getParent(), - OrigDefaultBlock); - new UnreachableInst(Switch->getContext(), NewDefaultBlock); - Switch->setDefaultDest(&*NewDefaultBlock); - if (DTU) { - SmallVector<DominatorTree::UpdateType, 2> Updates; - Updates.push_back({DominatorTree::Insert, BB, &*NewDefaultBlock}); - if (!is_contained(successors(BB), OrigDefaultBlock)) - Updates.push_back({DominatorTree::Delete, BB, &*OrigDefaultBlock}); - DTU->applyUpdates(Updates); - } -} - /// Turn a switch with two reachable destinations into an integer range /// comparison and branch. bool SimplifyCFGOpt::TurnSwitchRangeIntoICmp(SwitchInst *SI, diff --git a/llvm/test/Transforms/CorrelatedValuePropagation/basic.ll b/llvm/test/Transforms/CorrelatedValuePropagation/basic.ll index 5abbcbc90e01..a620c8468d4d 100644 --- a/llvm/test/Transforms/CorrelatedValuePropagation/basic.ll +++ b/llvm/test/Transforms/CorrelatedValuePropagation/basic.ll @@ -382,7 +382,7 @@ define i32 @switch_range(i32 %cond) { ; CHECK-NEXT: entry: ; CHECK-NEXT: [[S:%.*]] = urem i32 [[COND:%.*]], 3 ; CHECK-NEXT: [[S1:%.*]] = add nuw nsw i32 [[S]], 1 -; CHECK-NEXT: switch i32 [[S1]], label [[UNREACHABLE:%.*]] [ +; CHECK-NEXT: switch i32 [[S1]], label [[ENTRY_UNREACHABLEDEFAULT:%.*]] [ ; CHECK-NEXT: i32 1, label [[EXIT1:%.*]] ; CHECK-NEXT: i32 2, label [[EXIT2:%.*]] ; CHECK-NEXT: i32 3, label [[EXIT1]] @@ -391,6 +391,8 @@ define i32 @switch_range(i32 %cond) { ; CHECK-NEXT: ret i32 1 ; CHECK: exit2: ; CHECK-NEXT: ret i32 2 +; CHECK: entry.unreachabledefault: +; CHECK-NEXT: unreachable ; CHECK: unreachable: ; CHECK-NEXT: ret i32 0 ; @@ -453,10 +455,9 @@ define i8 @switch_defaultdest_multipleuse(i8 %t0) { ; CHECK-NEXT: entry: ; CHECK-NEXT: [[O:%.*]] = or i8 [[T0:%.*]], 1 ; CHECK-NEXT: [[R:%.*]] = srem i8 1, [[O]] -; CHECK-NEXT: switch i8 [[R]], label [[EXIT:%.*]] [ -; CHECK-NEXT: i8 0, label [[EXIT]] -; CHECK-NEXT: i8 1, label [[EXIT]] -; CHECK-NEXT: ] +; CHECK-NEXT: br label [[EXIT:%.*]] +; CHECK: entry.unreachabledefault: +; CHECK-NEXT: unreachable ; CHECK: exit: ; CHECK-NEXT: ret i8 0 ; </cut>