[PATCH 10/28] D03/DSDT: use irq producer/consumer to support mbi-gen
by Heyi Guo
Use irq producer/consumer to represent the topology of device
and mbi-gen:
We are using _PRS methd to indicate number of irq pins instead
of num_pins in DT.
For mbi-gen,
Device(MBI0) {
Name(_HID, "HISI0152")
Name(_UID, Zero)
Name(_CRS, ResourceTemplate() {
Memory32Fixed(ReadWrite, 0xa0080000, 0x10000)
})
Name (_PRS, ResourceTemplate() {
Interrupt(ResourceProducer,...) {12,14,....}
})
}
For devices,
Device(COM0) {
Name(_HID, "ACPIIDxx")
Name(_UID, Zero)
Name(_CRS, ResourceTemplate() {
Memory32Fixed(ReadWrite, 0xb0030000, 0x10000)
Interrupt(ResourceConsumer,..., "\_SB.MBI0") {12}
})
}
Update the DSDT as above.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Hanjun Guo <hanjun.guo(a)linaro.org>
---
.../Hi1610/Hi1610AcpiTables/Dsdt/D03Hns.asl | 6 +-
.../Hi1610/Hi1610AcpiTables/Dsdt/D03Mbig.asl | 163 ++++++++++++++++++++-
.../Hi1610/Hi1610AcpiTables/Dsdt/D03Sas.asl | 18 +--
.../Hi1610/Hi1610AcpiTables/Dsdt/D03Usb.asl | 2 +-
4 files changed, 174 insertions(+), 15 deletions(-)
diff --git a/Chips/Hisilicon/Hi1610/Hi1610AcpiTables/Dsdt/D03Hns.asl b/Chips/Hisilicon/Hi1610/Hi1610AcpiTables/Dsdt/D03Hns.asl
index d8d453a..9a7fdb0 100644
--- a/Chips/Hisilicon/Hi1610/Hi1610AcpiTables/Dsdt/D03Hns.asl
+++ b/Chips/Hisilicon/Hi1610/Hi1610AcpiTables/Dsdt/D03Hns.asl
@@ -150,12 +150,12 @@ Scope(_SB)
Name (_CRS, ResourceTemplate (){
Memory32Fixed (ReadWrite, 0xc5000000 , 0x890000)
Memory32Fixed (ReadWrite, 0xc7000000 , 0x60000)
- Interrupt (ResourceConsumer, Edge, ActiveHigh, Exclusive,,,)
+ Interrupt (ResourceConsumer, Edge, ActiveHigh, Exclusive, 0, "\\_SB.MBI3")
{
576, 577, 578, 579, 580, 581, 582, 583, 584, 585, 586, 587, 588,
589, 590, 591, 592, 593, 594, 595, 596, 597, 598, 599, 600,
}
- Interrupt (ResourceConsumer, Edge, ActiveHigh, Exclusive,,,)
+ Interrupt (ResourceConsumer, Edge, ActiveHigh, Exclusive, 0, "\\_SB.MBI3")
{
960, 961, 962, 963, 964, 965, 966, 967, 968, 969, 970, 971, 972, 973, 974, 975,
976, 977, 978, 979, 980, 981, 982, 983, 984, 985, 986, 987, 988, 989, 990, 991,
@@ -170,7 +170,7 @@ Scope(_SB)
1120, 1121, 1122, 1123, 1124, 1125, 1126, 1127, 1128, 1129, 1130, 1131, 1132, 1133, 1134, 1135,
1136, 1137, 1138, 1139, 1140, 1141, 1142, 1143, 1144, 1145, 1146, 1147, 1148, 1149, 1150, 1151,
}
- Interrupt (ResourceConsumer, Edge, ActiveHigh, Exclusive,,,)
+ Interrupt (ResourceConsumer, Edge, ActiveHigh, Exclusive, 0, "\\_SB.MBI3")
{
1152, 1153, 1154, 1155, 1156, 1157, 1158, 1159, 1160, 1161, 1162, 1163, 1164, 1165, 1166, 1167,
1168, 1169, 1170, 1171, 1172, 1173, 1174, 1175, 1176, 1177, 1178, 1179, 1180, 1181, 1182, 1183,
diff --git a/Chips/Hisilicon/Hi1610/Hi1610AcpiTables/Dsdt/D03Mbig.asl b/Chips/Hisilicon/Hi1610/Hi1610AcpiTables/Dsdt/D03Mbig.asl
index 4eaa073..5456bd8 100644
--- a/Chips/Hisilicon/Hi1610/Hi1610AcpiTables/Dsdt/D03Mbig.asl
+++ b/Chips/Hisilicon/Hi1610/Hi1610AcpiTables/Dsdt/D03Mbig.asl
@@ -22,6 +22,10 @@ Scope(_SB)
Memory32Fixed(ReadWrite, 0xa0080000, 0x10000)
})
+ Name(_PRS, ResourceTemplate() {
+ Interrupt(ResourceProducer, Edge, ActiveHigh, Exclusive, 0,,) {0x41, 0x42}
+ })
+
Name(_DSD, Package () {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package ()
@@ -38,6 +42,44 @@ Scope(_SB)
Name(_CRS, ResourceTemplate() {
Memory32Fixed(ReadWrite, 0xa0080000, 0x10000)
})
+
+ Name(_PRS, ResourceTemplate() {
+ Interrupt (ResourceProducer, Level, ActiveHigh, Exclusive, ,, )
+ {
+ 64,65,66,67,68,
+ 69,70,71,72,73,
+ 75,76,77,78,79,
+ 80,81,82,83,84,
+ 85,86,87,88,89,
+ 90,91,92,93,94,
+ 95,96,97,98,99,
+ 100,101,102,103,104,
+ 105,106,107,108,109,
+ 110,111,112,113,114,
+ 115,116,117,118,119,
+ 120,121,122,123,124,
+ 125,126,127,128,129,
+ 130,131,132,133,134,
+ 135,136,137,138,139,
+ 140,141,142,143,144,
+ 145,146,147,148,149,
+ 150,151,152,153,154,
+ 155,156,157,158,159,
+ 160,
+ }
+
+ Interrupt (ResourceProducer, Edge, ActiveHigh, Exclusive, ,, )
+ {
+ 576,577,578,579,580,
+ 581,582,583,584,585,
+ 586,587,588,589,590,
+ 591,592,593,594,595,
+ 596,597,598,599,600,
+ 601,602,603,604,605,
+ 606,607,
+ }
+ })
+
Name(_DSD, Package () {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package ()
@@ -53,6 +95,44 @@ Scope(_SB)
Name(_CRS, ResourceTemplate() {
Memory32Fixed(ReadWrite, 0xa0080000, 0x10000)
})
+
+ Name(_PRS, ResourceTemplate() {
+ Interrupt (ResourceProducer, Level, ActiveHigh, Exclusive, ,, )
+ {
+ 192,193,194,195,196,
+ 197,198,199,200,201,
+ 202,203,204,205,206,
+ 207,208,209,210,211,
+ 212,213,214,215,216,
+ 217,218,219,220,221,
+ 222,223,224,225,226,
+ 227,228,229,230,231,
+ 232,233,234,235,236,
+ 237,238,239,240,241,
+ 242,243,244,245,246,
+ 247,248,249,250,251,
+ 252,253,254,255,256,
+ 257,258,259,260,261,
+ 262,263,264,265,266,
+ 267,268,269,270,271,
+ 272,273,274,275,276,
+ 277,278,279,280,281,
+ 282,283,284,285,286,
+ 287,
+ }
+
+ Interrupt (ResourceProducer, Edge, ActiveHigh, Exclusive, ,, )
+ {
+ 608,609,610,611,
+ 612,613,614,615,616,
+ 617,618,619,620,621,
+ 622,623,624,625,626,
+ 627,628,629,630,631,
+ 632,633,634,635,636,
+ 637,638,639,
+ }
+ })
+
Name(_DSD, Package () {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package ()
@@ -68,6 +148,45 @@ Scope(_SB)
Name(_CRS, ResourceTemplate() {
Memory32Fixed(ReadWrite, 0xc0080000, 0x10000)
})
+
+Name(_PRS, ResourceTemplate() {
+ Interrupt (ResourceProducer, Edge, ActiveHigh, Exclusive,,,)
+ {
+ 576, 577, 578, 579, 580, 581, 582, 583, 584, 585, 586, 587, 588,
+ 589, 590, 591, 592, 593, 594, 595, 596, 597, 598, 599, 600,
+ }
+ Interrupt (ResourceProducer, Edge, ActiveHigh, Exclusive,,,)
+ {
+ 960, 961, 962, 963, 964, 965, 966, 967, 968, 969, 970, 971, 972, 973, 974, 975,
+ 976, 977, 978, 979, 980, 981, 982, 983, 984, 985, 986, 987, 988, 989, 990, 991,
+ 992, 993, 994, 995, 996, 997, 998, 999, 1000, 1001, 1002, 1003, 1004, 1005, 1006, 1007,
+ 1008, 1009, 1010, 1011, 1012, 1013, 1014, 1015, 1016, 1017, 1018, 1019, 1020, 1021, 1022, 1023,
+ 1024, 1025, 1026, 1027, 1028, 1029, 1030, 1031, 1032, 1033, 1034, 1035, 1036, 1037, 1038, 1039,
+ 1040, 1041, 1042, 1043, 1044, 1045, 1046, 1047, 1048, 1049, 1050, 1051, 1052, 1053, 1054, 1055,
+ 1056, 1057, 1058, 1059, 1060, 1061, 1062, 1063, 1064, 1065, 1066, 1067, 1068, 1069, 1070, 1071,
+ 1072, 1073, 1074, 1075, 1076, 1077, 1078, 1079, 1080, 1081, 1082, 1083, 1084, 1085, 1086, 1087,
+ 1088, 1089, 1090, 1091, 1092, 1093, 1094, 1095, 1096, 1097, 1098, 1099, 1100, 1101, 1102, 1103,
+ 1104, 1105, 1106, 1107, 1108, 1109, 1110, 1111, 1112, 1113, 1114, 1115, 1116, 1117, 1118, 1119,
+ 1120, 1121, 1122, 1123, 1124, 1125, 1126, 1127, 1128, 1129, 1130, 1131, 1132, 1133, 1134, 1135,
+ 1136, 1137, 1138, 1139, 1140, 1141, 1142, 1143, 1144, 1145, 1146, 1147, 1148, 1149, 1150, 1151,
+ }
+ Interrupt (ResourceProducer, Edge, ActiveHigh, Exclusive,,,)
+ {
+ 1152, 1153, 1154, 1155, 1156, 1157, 1158, 1159, 1160, 1161, 1162, 1163, 1164, 1165, 1166, 1167,
+ 1168, 1169, 1170, 1171, 1172, 1173, 1174, 1175, 1176, 1177, 1178, 1179, 1180, 1181, 1182, 1183,
+ 1184, 1185, 1186, 1187, 1188, 1189, 1190, 1191, 1192, 1193, 1194, 1195, 1196, 1197, 1198, 1199,
+ 1200, 1201, 1202, 1203, 1204, 1205, 1206, 1207, 1208, 1209, 1210, 1211, 1212, 1213, 1214, 1215,
+ 1216, 1217, 1218, 1219, 1220, 1221, 1222, 1223, 1224, 1225, 1226, 1227, 1228, 1229, 1230, 1231,
+ 1232, 1233, 1234, 1235, 1236, 1237, 1238, 1239, 1240, 1241, 1242, 1243, 1244, 1245, 1246, 1247,
+ 1248, 1249, 1250, 1251, 1252, 1253, 1254, 1255, 1256, 1257, 1258, 1259, 1260, 1261, 1262, 1263,
+ 1264, 1265, 1266, 1267, 1268, 1269, 1270, 1271, 1272, 1273, 1274, 1275, 1276, 1277, 1278, 1279,
+ 1280, 1281, 1282, 1283, 1284, 1285, 1286, 1287, 1288, 1289, 1290, 1291, 1292, 1293, 1294, 1295,
+ 1296, 1297, 1298, 1299, 1300, 1301, 1302, 1303, 1304, 1305, 1306, 1307, 1308, 1309, 1310, 1311,
+ 1312, 1313, 1314, 1315, 1316, 1317, 1318, 1319, 1320, 1321, 1322, 1323, 1324, 1325, 1326, 1327,
+ 1328, 1329, 1330, 1331, 1332, 1333, 1334, 1335, 1336, 1337, 1338, 1339, 1340, 1341, 1342, 1343,
+ }
+})
+
Name(_DSD, Package () {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package ()
@@ -76,7 +195,7 @@ Scope(_SB)
}
})
}
-
+/*
Device(MBI4) { // Mbi-gen dsa1 dbg0 intc
Name(_HID, "HISI0152")
Name(_CID, "MBIGen")
@@ -106,13 +225,53 @@ Scope(_SB)
}
})
}
-
+*/
Device(MBI6) { // Mbi-gen dsa sas0 intc
Name(_HID, "HISI0152")
Name(_CID, "MBIGen")
Name(_CRS, ResourceTemplate() {
Memory32Fixed(ReadWrite, 0xc0080000, 0x10000)
})
+
+ Name(_PRS, ResourceTemplate() {
+ Interrupt (Resourceproducer, Level, ActiveHigh, Exclusive, ,, )
+ {
+ 64,65,66,67,68,
+ 69,70,71,72,73,
+ 75,76,77,78,79,
+ 80,81,82,83,84,
+ 85,86,87,88,89,
+ 90,91,92,93,94,
+ 95,96,97,98,99,
+ 100,101,102,103,104,
+ 105,106,107,108,109,
+ 110,111,112,113,114,
+ 115,116,117,118,119,
+ 120,121,122,123,124,
+ 125,126,127,128,129,
+ 130,131,132,133,134,
+ 135,136,137,138,139,
+ 140,141,142,143,144,
+ 145,146,147,148,149,
+ 150,151,152,153,154,
+ 155,156,157,158,159,
+ 160,
+ }
+
+ Interrupt (Resourceproducer, Edge, ActiveHigh, Exclusive, ,, )
+ {
+ 601,602,603,604,
+ 605,606,607,608,609,
+ 610,611,612,613,614,
+ 615,616,617,618,619,
+ 620,621,622,623,624,
+ 625,626,627,628,629,
+ 630,631,632,
+ }
+ })
+
+
+
Name(_DSD, Package () {
ToUUID("daffd814-6eba-4d8c-8a91-bc9bbf4aa301"),
Package ()
diff --git a/Chips/Hisilicon/Hi1610/Hi1610AcpiTables/Dsdt/D03Sas.asl b/Chips/Hisilicon/Hi1610/Hi1610AcpiTables/Dsdt/D03Sas.asl
index ce8ccd6..de21b2d 100644
--- a/Chips/Hisilicon/Hi1610/Hi1610AcpiTables/Dsdt/D03Sas.asl
+++ b/Chips/Hisilicon/Hi1610/Hi1610AcpiTables/Dsdt/D03Sas.asl
@@ -21,8 +21,8 @@ Scope(_SB)
Name(_CCA, 1)
Name(_CRS, ResourceTemplate() {
Memory32Fixed(ReadWrite, 0xC3000000, 0x10000)
- Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, ,, )
- {
+ Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, 0, "\\_SB.MBI6")
+ {
64,65,66,67,68,
69,70,71,72,73,
75,76,77,78,79,
@@ -45,7 +45,7 @@ Scope(_SB)
160,
}
- Interrupt (ResourceConsumer, Edge, ActiveHigh, Exclusive, ,, )
+ Interrupt (ResourceConsumer, Edge, ActiveHigh, Exclusive, 0, "\\_SB.MBI6" )
{
601,602,603,604,
605,606,607,608,609,
@@ -93,12 +93,12 @@ Scope(_SB)
Device(SAS1) {
Name(_HID, "HISI0162")
- Name(_CCA, 1)
+ Name(_CCA, 1)
Name(_CRS, ResourceTemplate() {
Memory32Fixed(ReadWrite, 0xA2000000, 0x10000)
- Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, ,, )
- {
+ Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, 0, "\\_SB.MBI1")
+ {
64,65,66,67,68,
69,70,71,72,73,
75,76,77,78,79,
@@ -121,7 +121,7 @@ Scope(_SB)
160,
}
- Interrupt (ResourceConsumer, Edge, ActiveHigh, Exclusive, ,, )
+ Interrupt (ResourceConsumer, Edge, ActiveHigh, Exclusive, 0, "\\_SB.MBI1")
{
576,577,578,579,580,
581,582,583,584,585,
@@ -174,7 +174,7 @@ Scope(_SB)
Name(_CRS, ResourceTemplate() {
Memory32Fixed(ReadWrite, 0xA3000000, 0x10000)
- Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, ,, )
+ Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, 0, "\\_SB.MBI2")
{
192,193,194,195,196,
197,198,199,200,201,
@@ -198,7 +198,7 @@ Scope(_SB)
287,
}
- Interrupt (ResourceConsumer, Edge, ActiveHigh, Exclusive, ,, )
+ Interrupt (ResourceConsumer, Edge, ActiveHigh, Exclusive, 0, "\\_SB.MBI2")
{
608,609,610,611,
612,613,614,615,616,
diff --git a/Chips/Hisilicon/Hi1610/Hi1610AcpiTables/Dsdt/D03Usb.asl b/Chips/Hisilicon/Hi1610/Hi1610AcpiTables/Dsdt/D03Usb.asl
index 28ba03d..8429a4b 100644
--- a/Chips/Hisilicon/Hi1610/Hi1610AcpiTables/Dsdt/D03Usb.asl
+++ b/Chips/Hisilicon/Hi1610/Hi1610AcpiTables/Dsdt/D03Usb.asl
@@ -32,7 +32,7 @@ Scope(_SB)
0xa7020000, // Address Base
0x00010000, // Address Length
)
- Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, ,, )
+ Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, 0, "\\_SB.MBI0")
{
0x00000041,
}
--
1.9.1
9 years
- 1
- 0
[PATCH 00/14] Add initial support for NXP/FSL's LS1043A RDB platform
by Bhupesh Sharma
From: Bhupesh Sharma <bhupesh.sharma(a)nxp.com>
This patchset adds the support for NXP/FSL's LS1043A RDB platform.
The LS1043A RDB platform houses the 4-A53 core LS1043A SoC from NXP/FSL.
Details about the LS1043A SoC and RDB board can be seen here:
SoC:
---
http://www.nxp.com/products/microcontrollers-and-processors/arm-processors/
qoriq-arm-processors/qoriq-ls1043a-and-ls1023a-multicore-communications-processors:LS1043A?lang_cd=en
RDB board:
---------
http://www.nxp.com/products/microcontrollers-and-processors/arm-processors/
qoriq-arm-processors/qoriq-ls1043a-reference-design-board:LS1043A-RDB#pspFeatures
UEFI firmware boot-flow on the NXP/FSL ARMv8 SoCs is different from the
usual ATF (which runs in EL3) and UEFI (which runs entirely in EL2 mode)
flow:
NXP/FSL ARMv8 SoCs currently use a EL3 platform and run-time
security firmware which is called PPA (Primary Protected Application).
This firmware is placed on the flash device and is loaded into DDR
and executed via a UEFI DXE driver. PPA does the initial platform
EL3 settings and then returns the control back to UEFI in EL2
exception level.
Later implementations of PPA will allow it to start by itself in the
EL3 level and start UEFI in EL2 exception level.
This patchset is rebased against the OpenPlatformPkg git tree (master
branch).
Sakar Arora (14):
Platforms/NXP: Add intial support for LS1043A RDB Board
Platforms/NXP: Add support for DDR Controller initialization
Platforms/NXP: Add support for CPLD controller access
Platforms/NXP: Add initial support for LS1043a SOC Library
Chips/NXP: Add support for DUART library
Platforms/NXP: Add support for initialization of peripherals on
LS1043A
Platforms/NXP: Add support for system reset library
Chips/NXP: Add PrePi initialization module that runs from XIP source
Chips/NXP: Add I2C operations library
Chips/NXP: Add I2C master driver based on I2C library
Chips/NXP: Add support for execution of PPA for EL3 initialization
Chips/NXP: Add support for DS1307 RTC library
Platforms/NXP: Add support for Watchdog driver (LS1043A)
Platforms/NXP: Add the fdf, dsc and dec files for LS1043aRdbPkg build
Chips/Nxp/QoriqLs/I2c/I2cDxe.c | 156 ++++
Chips/Nxp/QoriqLs/I2c/I2cDxe.inf | 52 ++
Chips/Nxp/QoriqLs/Include/Library/DUart.h | 133 ++++
Chips/Nxp/QoriqLs/Include/Library/I2c.h | 199 +++++
.../QoriqLs/Library/DUartPortLib/DUartPortLib.c | 321 ++++++++
.../QoriqLs/Library/DUartPortLib/DUartPortLib.inf | 43 ++
.../QoriqLs/Library/Ds1307RtcLib/Ds1307RtcLib.c | 250 +++++++
.../QoriqLs/Library/Ds1307RtcLib/Ds1307RtcLib.inf | 44 ++
Chips/Nxp/QoriqLs/Library/I2cLib/I2cLib.c | 513 +++++++++++++
Chips/Nxp/QoriqLs/Library/I2cLib/I2cLib.inf | 41 ++
.../Library/PrePiNor/AArch64/ModuleEntryPoint.S | 34 +
Chips/Nxp/QoriqLs/Library/PrePiNor/PrePiNor.c | 52 ++
Chips/Nxp/QoriqLs/Library/PrePiNor/PrePiNor.inf | 48 ++
Chips/Nxp/QoriqLs/NxpQoriqLs.dec | 50 ++
Chips/Nxp/QoriqLs/PpaInitDxe/PpaInit.c | 117 +++
Chips/Nxp/QoriqLs/PpaInitDxe/PpaInitDxe.inf | 63 ++
Chips/Nxp/QoriqLs/PpaInitDxe/PpaInitHelper.S | 79 ++
Chips/Nxp/QoriqLs/PpaInitDxe/PpaItbParse.c | 144 ++++
Chips/Nxp/QoriqLs/PpaInitDxe/PpaItbParse.h | 52 ++
Platforms/Nxp/LS1043aRdb/Include/Library/Common.h | 68 ++
Platforms/Nxp/LS1043aRdb/Include/Library/CpldLib.h | 75 ++
Platforms/Nxp/LS1043aRdb/Include/Library/Ddr.h | 190 +++++
Platforms/Nxp/LS1043aRdb/Include/Library/FslIfc.h | 721 ++++++++++++++++++
.../Nxp/LS1043aRdb/Include/Library/Ls1043aSerDes.h | 89 +++
.../Nxp/LS1043aRdb/Include/Library/PlatformLib.h | 179 +++++
Platforms/Nxp/LS1043aRdb/Include/Library/SocLib.h | 509 +++++++++++++
Platforms/Nxp/LS1043aRdb/LS1043aRdbPkg.dec | 166 +++++
Platforms/Nxp/LS1043aRdb/LS1043aRdbPkg.dsc | 602 +++++++++++++++
Platforms/Nxp/LS1043aRdb/LS1043aRdbPkg.fdf | 311 ++++++++
.../LS1043aRdb/LS1043aWatchDog/LS1043aWatchDog.c | 355 +++++++++
.../LS1043aWatchDog/LS1043aWatchDogDxe.inf | 54 ++
Platforms/Nxp/LS1043aRdb/Library/CpldLib/CpldLib.c | 157 ++++
.../Nxp/LS1043aRdb/Library/CpldLib/CpldLib.inf | 33 +
Platforms/Nxp/LS1043aRdb/Library/DdrLib/DdrLib.c | 188 +++++
Platforms/Nxp/LS1043aRdb/Library/DdrLib/DdrLib.inf | 41 ++
.../Nxp/LS1043aRdb/Library/LS1043aRdbLib/Common.c | 103 +++
.../LS1043aRdb/Library/LS1043aRdbLib/LS1043aRdb.c | 109 +++
.../Library/LS1043aRdbLib/LS1043aRdbHelper.S | 61 ++
.../Library/LS1043aRdbLib/LS1043aRdbLib.inf | 56 ++
.../Library/LS1043aRdbLib/LS1043aRdbMem.c | 149 ++++
.../Library/LS1043aSocLib/LS1043aSocLib.c | 819 +++++++++++++++++++++
.../Library/LS1043aSocLib/LS1043aSocLib.inf | 53 ++
.../LS1043aRdb/Library/LS1043aSocLib/LsSerDes.c | 195 +++++
.../Library/ResetSystemLib/ResetSystemLib.c | 87 +++
.../Library/ResetSystemLib/ResetSystemLib.inf | 50 ++
Platforms/Nxp/LS1043aRdb/build.sh | 72 ++
Platforms/Nxp/LS1043aRdb/ls1043a_env.cshrc | 2 +
47 files changed, 7885 insertions(+)
create mode 100644 Chips/Nxp/QoriqLs/I2c/I2cDxe.c
create mode 100644 Chips/Nxp/QoriqLs/I2c/I2cDxe.inf
create mode 100644 Chips/Nxp/QoriqLs/Include/Library/DUart.h
create mode 100644 Chips/Nxp/QoriqLs/Include/Library/I2c.h
create mode 100644 Chips/Nxp/QoriqLs/Library/DUartPortLib/DUartPortLib.c
create mode 100644 Chips/Nxp/QoriqLs/Library/DUartPortLib/DUartPortLib.inf
create mode 100644 Chips/Nxp/QoriqLs/Library/Ds1307RtcLib/Ds1307RtcLib.c
create mode 100644 Chips/Nxp/QoriqLs/Library/Ds1307RtcLib/Ds1307RtcLib.inf
create mode 100644 Chips/Nxp/QoriqLs/Library/I2cLib/I2cLib.c
create mode 100644 Chips/Nxp/QoriqLs/Library/I2cLib/I2cLib.inf
create mode 100644 Chips/Nxp/QoriqLs/Library/PrePiNor/AArch64/ModuleEntryPoint.S
create mode 100644 Chips/Nxp/QoriqLs/Library/PrePiNor/PrePiNor.c
create mode 100644 Chips/Nxp/QoriqLs/Library/PrePiNor/PrePiNor.inf
create mode 100644 Chips/Nxp/QoriqLs/NxpQoriqLs.dec
create mode 100644 Chips/Nxp/QoriqLs/PpaInitDxe/PpaInit.c
create mode 100644 Chips/Nxp/QoriqLs/PpaInitDxe/PpaInitDxe.inf
create mode 100644 Chips/Nxp/QoriqLs/PpaInitDxe/PpaInitHelper.S
create mode 100755 Chips/Nxp/QoriqLs/PpaInitDxe/PpaItbParse.c
create mode 100755 Chips/Nxp/QoriqLs/PpaInitDxe/PpaItbParse.h
create mode 100644 Platforms/Nxp/LS1043aRdb/Include/Library/Common.h
create mode 100644 Platforms/Nxp/LS1043aRdb/Include/Library/CpldLib.h
create mode 100644 Platforms/Nxp/LS1043aRdb/Include/Library/Ddr.h
create mode 100644 Platforms/Nxp/LS1043aRdb/Include/Library/FslIfc.h
create mode 100644 Platforms/Nxp/LS1043aRdb/Include/Library/Ls1043aSerDes.h
create mode 100644 Platforms/Nxp/LS1043aRdb/Include/Library/PlatformLib.h
create mode 100644 Platforms/Nxp/LS1043aRdb/Include/Library/SocLib.h
create mode 100644 Platforms/Nxp/LS1043aRdb/LS1043aRdbPkg.dec
create mode 100644 Platforms/Nxp/LS1043aRdb/LS1043aRdbPkg.dsc
create mode 100644 Platforms/Nxp/LS1043aRdb/LS1043aRdbPkg.fdf
create mode 100644 Platforms/Nxp/LS1043aRdb/LS1043aWatchDog/LS1043aWatchDog.c
create mode 100644 Platforms/Nxp/LS1043aRdb/LS1043aWatchDog/LS1043aWatchDogDxe.inf
create mode 100644 Platforms/Nxp/LS1043aRdb/Library/CpldLib/CpldLib.c
create mode 100644 Platforms/Nxp/LS1043aRdb/Library/CpldLib/CpldLib.inf
create mode 100644 Platforms/Nxp/LS1043aRdb/Library/DdrLib/DdrLib.c
create mode 100644 Platforms/Nxp/LS1043aRdb/Library/DdrLib/DdrLib.inf
create mode 100644 Platforms/Nxp/LS1043aRdb/Library/LS1043aRdbLib/Common.c
create mode 100644 Platforms/Nxp/LS1043aRdb/Library/LS1043aRdbLib/LS1043aRdb.c
create mode 100644 Platforms/Nxp/LS1043aRdb/Library/LS1043aRdbLib/LS1043aRdbHelper.S
create mode 100644 Platforms/Nxp/LS1043aRdb/Library/LS1043aRdbLib/LS1043aRdbLib.inf
create mode 100644 Platforms/Nxp/LS1043aRdb/Library/LS1043aRdbLib/LS1043aRdbMem.c
create mode 100644 Platforms/Nxp/LS1043aRdb/Library/LS1043aSocLib/LS1043aSocLib.c
create mode 100644 Platforms/Nxp/LS1043aRdb/Library/LS1043aSocLib/LS1043aSocLib.inf
create mode 100644 Platforms/Nxp/LS1043aRdb/Library/LS1043aSocLib/LsSerDes.c
create mode 100644 Platforms/Nxp/LS1043aRdb/Library/ResetSystemLib/ResetSystemLib.c
create mode 100644 Platforms/Nxp/LS1043aRdb/Library/ResetSystemLib/ResetSystemLib.inf
create mode 100755 Platforms/Nxp/LS1043aRdb/build.sh
create mode 100644 Platforms/Nxp/LS1043aRdb/ls1043a_env.cshrc
--
1.9.1
9 years
- 4
- 66
[PATCH v2] OpenPlatformPkg/Drivers/Net/MarvellYukonDxe: Added multi-controller support
by Daniil Egranov
Changelog:
v1
The patch adds support for multi-controller configuration.
v2
- Updated msk_if_softc structures to hold data pointers to its parent
controller structure and corresponding PHY structure.
- Updated e1000phy_softc structure to hold a data pointer to its
logical controller.
- Reduced number of parameters in multiple functions. Using the
msk_if_softc and msk_softc structure members instead.
- Corrected the code for dual MAC controllers. Each logical interface
has its own TX and RX buffers. The YUKON_DRIVER driver's structure
includes a controller port number. The SNP interface functions passing
a msk_if_softc object (corresponding to the controller interface) to
the if_msk interface functions.
- Removed linked lists from the if_msk and e1000phy. The association
between msk_softc and controller resolved on the SNP interface level.
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Daniil Egranov <daniil.egranov(a)arm.com>
---
Drivers/Net/MarvellYukonDxe/DriverBinding.c | 452 +++++++---
Drivers/Net/MarvellYukonDxe/MarvellYukon.h | 71 ++
Drivers/Net/MarvellYukonDxe/Snp.c | 64 +-
Drivers/Net/MarvellYukonDxe/e1000phy.c | 241 +++---
Drivers/Net/MarvellYukonDxe/e1000phyreg.h | 12 +
Drivers/Net/MarvellYukonDxe/if_msk.c | 1223 ++++++++++++++-------------
Drivers/Net/MarvellYukonDxe/if_msk.h | 23 +-
Drivers/Net/MarvellYukonDxe/if_mskreg.h | 14 +-
Drivers/Net/MarvellYukonDxe/miivar.h | 15 +-
9 files changed, 1272 insertions(+), 843 deletions(-)
diff --git a/Drivers/Net/MarvellYukonDxe/DriverBinding.c b/Drivers/Net/MarvellYukonDxe/DriverBinding.c
index 95068fa..6a51e3a 100644
--- a/Drivers/Net/MarvellYukonDxe/DriverBinding.c
+++ b/Drivers/Net/MarvellYukonDxe/DriverBinding.c
@@ -19,6 +19,8 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
#include "MarvellYukon.h"
#include "if_msk.h"
+static LIST_ENTRY MarvellYukonDrvDataHead;
+
/**
Test to see if this driver supports ControllerHandle. This service
is called by the EFI boot service ConnectController(). In
@@ -110,27 +112,14 @@ MarvellYukonDriverStart (
MAC_ADDR_DEVICE_PATH MacDeviceNode;
VOID *ChildPciIo;
YUKON_DRIVER *YukonDriver;
-
- Status = gBS->AllocatePool (EfiBootServicesData,
- sizeof (YUKON_DRIVER),
- (VOID**) &YukonDriver);
- if (EFI_ERROR (Status)) {
- DEBUG ((EFI_D_ERROR, "Marvell Yukon: AllocatePool() failed with Status = %r\n", EFI_OUT_OF_RESOURCES));
- return Status;
- }
-
- gBS->SetMem (YukonDriver, sizeof (YUKON_DRIVER), 0);
- EfiInitializeLock (&YukonDriver->Lock, TPL_NOTIFY);
-
- //
- // Set the structure signature
- //
- YukonDriver->Signature = YUKON_DRIVER_SIGNATURE;
+ struct msk_softc *ScData;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+ UINTN Port;
Status = gBS->OpenProtocol (
Controller,
&gEfiPciIoProtocolGuid,
- (VOID **) &YukonDriver->PciIo,
+ (VOID **) &PciIo,
pThis->DriverBindingHandle,
Controller,
EFI_OPEN_PROTOCOL_BY_DRIVER
@@ -143,131 +132,133 @@ MarvellYukonDriverStart (
}
//
- // Initialize the simple network protocol
+ // Initialize Marvell Yukon controller
+ // Get number of ports and MAC address for each port
//
- Status = InitializeSNPProtocol (YukonDriver);
-
- if (EFI_ERROR(Status)){
- DEBUG ((EFI_D_ERROR, "Marvell Yukon: InitializeSNPProtocol: ERROR Status = %r\n", Status));
- gBS->CloseProtocol (
- Controller,
- &gEfiPciIoProtocolGuid,
- pThis->DriverBindingHandle,
- Controller
- );
+ Status = mskc_attach (PciIo, &ScData);
+ if (EFI_ERROR (Status)) {
+ return Status;
}
- //
- // Set Device Path
- //
- Status = gBS->OpenProtocol (
- Controller,
- &gEfiDevicePathProtocolGuid,
- (VOID **) &ParentDevicePath,
- pThis->DriverBindingHandle,
- Controller,
- EFI_OPEN_PROTOCOL_GET_PROTOCOL
- );
+ Status = MarvellYukonAddControllerData (Controller, ScData);
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
- if (EFI_ERROR(Status)) {
- DEBUG ((EFI_D_ERROR, "Marvell Yukon: OpenProtocol:EFI_DEVICE_PATH_PROTOCOL error. Status = %r\n", Status));
+ for (Port = 0; Port < ScData->msk_num_port; Port++) {
- gBS->CloseProtocol (
- Controller,
- &gEfiPciIoProtocolGuid,
- pThis->DriverBindingHandle,
- Controller
- );
+ Status = gBS->AllocatePool (EfiBootServicesData,
+ sizeof (YUKON_DRIVER),
+ (VOID**) &YukonDriver);
+ if (EFI_ERROR (Status)) {
+ DEBUG ((EFI_D_ERROR, "Marvell Yukon: AllocatePool() failed with Status = %r\n", Status));
+ return Status;
+ }
- gBS->FreePool (YukonDriver);
- return Status;
- }
+ if(ScData->msk_if[Port] == NULL) {
+ DEBUG ((EFI_D_ERROR, "Marvell Yukon: AllocatePool() failed with Status = %r\n", EFI_BAD_BUFFER_SIZE));
+ return EFI_BAD_BUFFER_SIZE;
+ }
- gBS->SetMem (&MacDeviceNode, sizeof (MAC_ADDR_DEVICE_PATH), 0);
- MacDeviceNode.Header.Type = MESSAGING_DEVICE_PATH;
- MacDeviceNode.Header.SubType = MSG_MAC_ADDR_DP;
+ gBS->SetMem (YukonDriver, sizeof (YUKON_DRIVER), 0);
+ EfiInitializeLock (&YukonDriver->Lock, TPL_NOTIFY);
- SetDevicePathNodeLength (&MacDeviceNode, sizeof (MacDeviceNode));
+ //
+ // Set the structure signature
+ //
+ YukonDriver->Signature = YUKON_DRIVER_SIGNATURE;
- //
- // Initialize Yukon card so we can get the MAC address
- //
- Status = mskc_attach (YukonDriver->PciIo, &YukonDriver->SnpMode.PermanentAddress);
+ //
+ // Set MAC address
+ //
+ gBS->CopyMem (&YukonDriver->SnpMode.PermanentAddress, &(ScData->msk_if[Port])->MacAddress, sizeof (EFI_MAC_ADDRESS));
- if (EFI_ERROR (Status)) {
- gBS->FreePool (YukonDriver);
- return Status;
- }
+ //
+ // Set Port number
+ //
+ YukonDriver->Port = Port;
- mskc_detach();
+ //
+ // Initialize the simple network protocol
+ //
+ Status = InitializeSNPProtocol (YukonDriver);
- //
- // Assign fields for device path
- //
- gBS->CopyMem (&YukonDriver->SnpMode.CurrentAddress, &YukonDriver->SnpMode.PermanentAddress, sizeof (EFI_MAC_ADDRESS));
- gBS->CopyMem (&MacDeviceNode.MacAddress, &YukonDriver->SnpMode.CurrentAddress, sizeof (EFI_MAC_ADDRESS));
+ if (EFI_ERROR(Status)){
+ DEBUG ((EFI_D_ERROR, "Marvell Yukon: InitializeSNPProtocol: ERROR Status = %r\n", Status));
+ gBS->CloseProtocol (
+ Controller,
+ &gEfiPciIoProtocolGuid,
+ pThis->DriverBindingHandle,
+ Controller
+ );
+ }
- MacDeviceNode.IfType = YukonDriver->SnpMode.IfType;
- YukonDriver->DevicePath = AppendDevicePathNode (ParentDevicePath, &MacDeviceNode.Header);
- if (YukonDriver->DevicePath == NULL) {
- DEBUG ((EFI_D_ERROR, "Marvell Yukon: AppendDevicePathNode: ERROR Status = %r\n", EFI_OUT_OF_RESOURCES));
- gBS->CloseProtocol (
+ //
+ // Set Device Path
+ //
+ Status = gBS->OpenProtocol (
Controller,
- &gEfiPciIoProtocolGuid,
+ &gEfiDevicePathProtocolGuid,
+ (VOID **) &ParentDevicePath,
pThis->DriverBindingHandle,
- Controller
+ Controller,
+ EFI_OPEN_PROTOCOL_GET_PROTOCOL
);
- gBS->FreePool (YukonDriver);
- return EFI_OUT_OF_RESOURCES;
- }
- //
- // Install both the simple network and device path protocols.
- //
- Status = gBS->InstallMultipleProtocolInterfaces (
- &YukonDriver->Controller,
- &gEfiSimpleNetworkProtocolGuid,
- &YukonDriver->Snp,
- &gEfiDevicePathProtocolGuid,
- YukonDriver->DevicePath,
- NULL
- );
+ if (EFI_ERROR(Status)) {
+ DEBUG ((EFI_D_ERROR, "Marvell Yukon: OpenProtocol:EFI_DEVICE_PATH_PROTOCOL error. Status = %r\n", Status));
- if (EFI_ERROR(Status)){
- DEBUG ((EFI_D_ERROR, "Marvell Yukon: InstallMultipleProtocolInterfaces error. Status = %r\n", Status));
+ gBS->CloseProtocol (
+ Controller,
+ &gEfiPciIoProtocolGuid,
+ pThis->DriverBindingHandle,
+ Controller
+ );
- gBS->CloseProtocol (
- Controller,
- &gEfiPciIoProtocolGuid,
- pThis->DriverBindingHandle,
- Controller
- );
+ gBS->FreePool (YukonDriver);
+ return Status;
+ }
- gBS->FreePool (YukonDriver->DevicePath);
- gBS->FreePool (YukonDriver);
- return Status;
- } else {
+ gBS->SetMem (&MacDeviceNode, sizeof (MAC_ADDR_DEVICE_PATH), 0);
+ MacDeviceNode.Header.Type = MESSAGING_DEVICE_PATH;
+ MacDeviceNode.Header.SubType = MSG_MAC_ADDR_DP;
+
+ SetDevicePathNodeLength (&MacDeviceNode, sizeof (MacDeviceNode));
//
- // Hook as a child device
+ // Assign fields for device path
//
- Status = gBS->OpenProtocol (Controller,
- &gEfiPciIoProtocolGuid,
- &ChildPciIo,
- pThis->DriverBindingHandle,
- YukonDriver->Controller,
- EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER);
- if (EFI_ERROR(Status)){
- DEBUG ((EFI_D_ERROR, "Marvell Yukon: OpenProtocol: child controller error. Status = %r\n", Status));
+ gBS->CopyMem (&YukonDriver->SnpMode.CurrentAddress, &YukonDriver->SnpMode.PermanentAddress, sizeof (EFI_MAC_ADDRESS));
+ gBS->CopyMem (&MacDeviceNode.MacAddress, &YukonDriver->SnpMode.CurrentAddress, sizeof (EFI_MAC_ADDRESS));
- gBS->UninstallMultipleProtocolInterfaces (
+ MacDeviceNode.IfType = YukonDriver->SnpMode.IfType;
+ YukonDriver->DevicePath = AppendDevicePathNode (ParentDevicePath, &MacDeviceNode.Header);
+ if (YukonDriver->DevicePath == NULL) {
+ DEBUG ((EFI_D_ERROR, "Marvell Yukon: AppendDevicePathNode: ERROR Status = %r\n", EFI_OUT_OF_RESOURCES));
+ gBS->CloseProtocol (
Controller,
- &gEfiSimpleNetworkProtocolGuid,
- &YukonDriver->Snp,
- &gEfiDevicePathProtocolGuid,
- YukonDriver->DevicePath,
- NULL
+ &gEfiPciIoProtocolGuid,
+ pThis->DriverBindingHandle,
+ Controller
);
+ gBS->FreePool (YukonDriver);
+ return EFI_OUT_OF_RESOURCES;
+ }
+
+ //
+ // Install both the simple network and device path protocols.
+ //
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &YukonDriver->Controller,
+ &gEfiSimpleNetworkProtocolGuid,
+ &YukonDriver->Snp,
+ &gEfiDevicePathProtocolGuid,
+ YukonDriver->DevicePath,
+ NULL
+ );
+
+ if (EFI_ERROR(Status)){
+ DEBUG ((EFI_D_ERROR, "Marvell Yukon: InstallMultipleProtocolInterfaces error. Status = %r\n", Status));
gBS->CloseProtocol (
Controller,
@@ -280,13 +271,53 @@ MarvellYukonDriverStart (
gBS->FreePool (YukonDriver);
return Status;
} else {
- DEBUG ((EFI_D_NET, "Marvell Yukon: MarvellYukonDriverSupported: New Controller Handle = %p\n", YukonDriver->Controller));
+
+ //
+ // Hook as a child device
+ //
+ Status = gBS->OpenProtocol (Controller,
+ &gEfiPciIoProtocolGuid,
+ &ChildPciIo,
+ pThis->DriverBindingHandle,
+ YukonDriver->Controller,
+ EFI_OPEN_PROTOCOL_BY_CHILD_CONTROLLER);
+ if (EFI_ERROR(Status)){
+ DEBUG ((EFI_D_ERROR, "Marvell Yukon: OpenProtocol: child controller error. Status = %r\n", Status));
+
+ gBS->UninstallMultipleProtocolInterfaces (
+ Controller,
+ &gEfiSimpleNetworkProtocolGuid,
+ &YukonDriver->Snp,
+ &gEfiDevicePathProtocolGuid,
+ YukonDriver->DevicePath,
+ NULL
+ );
+
+ gBS->CloseProtocol (
+ Controller,
+ &gEfiPciIoProtocolGuid,
+ pThis->DriverBindingHandle,
+ Controller
+ );
+
+ gBS->FreePool (YukonDriver->DevicePath);
+ gBS->FreePool (YukonDriver);
+ return Status;
+ } else {
+ DEBUG ((EFI_D_NET, "Marvell Yukon: MarvellYukonDriverSupported: New Controller Handle = %p\n", YukonDriver->Controller));
+ }
+
+ Status = MarvellYukonAddControllerData (YukonDriver->Controller, ScData);
+ if (EFI_ERROR(Status)){
+ DEBUG ((EFI_D_ERROR, "Marvell Yukon: Failed to register port %d with controller handle %p\n", Port, YukonDriver->Controller));
+ }
+
}
- }
- if (!EFI_ERROR(Status)) {
- Status = gBS->CreateEvent (EVT_SIGNAL_EXIT_BOOT_SERVICES, TPL_CALLBACK,
- &MarvellYukonNotifyExitBoot, YukonDriver, &YukonDriver->ExitBootEvent);
+ if (!EFI_ERROR(Status)) {
+ Status = gBS->CreateEvent (EVT_SIGNAL_EXIT_BOOT_SERVICES, TPL_CALLBACK,
+ &MarvellYukonNotifyExitBoot, YukonDriver, &YukonDriver->ExitBootEvent);
+ }
}
return Status;
@@ -319,6 +350,8 @@ MarvellYukonDriverStop (
EFI_STATUS Status;
YUKON_DRIVER *YukonDriver;
EFI_TPL OldTpl;
+ UINTN ChildController;
+ struct msk_softc *ScData;
if (pThis == NULL) {
DEBUG ((EFI_D_ERROR, "Marvell Yukon: MarvellYukonDriverStop() failed with Status = %r\n", EFI_INVALID_PARAMETER));
@@ -330,15 +363,10 @@ MarvellYukonDriverStop (
return EFI_INVALID_PARAMETER;
}
- if (NumberOfChildren > 0) {
-
- //
- // Currently support only one network port
- //
- ASSERT (NumberOfChildren == 1);
+ for(ChildController = 0; ChildController < NumberOfChildren; ChildController ++) {
Status = gBS->OpenProtocol (
- ChildHandleBuffer[0],
+ ChildHandleBuffer[ChildController],
&gEfiSimpleNetworkProtocolGuid,
(VOID **) &SimpleNetwork,
pThis->DriverBindingHandle,
@@ -349,10 +377,16 @@ MarvellYukonDriverStop (
if (!EFI_ERROR(Status)) {
YukonDriver = YUKON_DEV_FROM_THIS_SNP (SimpleNetwork);
+
+ Status = MarvellYukonGetControllerData(YukonDriver->Controller, &ScData);
+ if (EFI_ERROR(Status)) {
+ continue;
+ }
+
OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
- ASSERT (YukonDriver->Controller == ChildHandleBuffer[0]);
- if (YukonDriver->SnpMode.State != EfiSimpleNetworkStopped) {
+ ASSERT (YukonDriver->Controller == ChildHandleBuffer[ChildController]);
+ if (YukonDriver->SnpMode.State != EfiSimpleNetworkStopped) {
//
// Device in use, cannot stop driver instance
@@ -364,11 +398,15 @@ MarvellYukonDriverStop (
//
// Unhook the child controller
//
- gBS->CloseProtocol (Controller,
+ Status = gBS->CloseProtocol (Controller,
&gEfiPciIoProtocolGuid,
pThis->DriverBindingHandle,
YukonDriver->Controller);
+ if (EFI_ERROR(Status)){
+ DEBUG ((EFI_D_ERROR, "Marvell Yukon: MarvellYukonDriverStop:Close Child EfiPciIoProtocol error. Status %r\n", Status));
+ }
+
Status = gBS->UninstallMultipleProtocolInterfaces (
YukonDriver->Controller,
&gEfiSimpleNetworkProtocolGuid,
@@ -382,25 +420,37 @@ MarvellYukonDriverStop (
DEBUG ((EFI_D_ERROR, "Marvell Yukon: MarvellYukonDriverStop:UninstallMultipleProtocolInterfaces error. Status %r\n", Status));
}
+ gBS->FreePool(ScData);
+ MarvellYukonDelControllerData(YukonDriver->Controller);
+
gBS->CloseEvent (YukonDriver->ExitBootEvent);
gBS->FreePool (YukonDriver->DevicePath);
gBS->FreePool (YukonDriver);
}
gBS->RestoreTPL (OldTpl);
}
- } else {
- Status = gBS->CloseProtocol (
- Controller,
- &gEfiPciIoProtocolGuid,
- pThis->DriverBindingHandle,
- Controller
- );
+ }
- if (EFI_ERROR(Status)){
- DEBUG ((EFI_D_ERROR, "Marvell Yukon: MarvellYukonDriverStop:Close EfiPciIoProtocol error. Status %r\n", Status));
- }
+ Status = gBS->CloseProtocol (
+ Controller,
+ &gEfiPciIoProtocolGuid,
+ pThis->DriverBindingHandle,
+ Controller
+ );
+
+ if (EFI_ERROR(Status)){
+ DEBUG ((EFI_D_ERROR, "Marvell Yukon: MarvellYukonDriverStop:Close EfiPciIoProtocol error. Status %r\n", Status));
+ }
+
+ Status = MarvellYukonGetControllerData(Controller, &ScData);
+ if (EFI_ERROR(Status)) {
+ return Status;
}
+ mskc_shutdown (ScData);
+ gBS->FreePool(ScData);
+ Status = MarvellYukonDelControllerData(Controller);
+
return Status;
}
@@ -436,6 +486,123 @@ MarvellYukonNotifyExitBoot (
}
}
+/**
+ Get driver's data structure associated with controller
+
+ @param [in] Controller Controller Id.
+ @param [out] Data Driver's data.
+
+**/
+EFI_STATUS
+EFIAPI
+MarvellYukonGetControllerData(
+ IN EFI_HANDLE Controller,
+ OUT struct msk_softc **Data
+ )
+{
+ MSK_LINKED_DRV_BUF *DrvNode;
+ EFI_STATUS Status;
+
+ Status = MarvellYukonFindControllerNode (Controller, &DrvNode);
+ if (!EFI_ERROR(Status)) {
+ *Data = DrvNode->Data;
+ }
+ return Status;
+}
+
+/**
+ Add driver's data structure associated with controller
+
+ @param [in] Controller Controller Id.
+ @param [in] Data Driver's data.
+
+**/
+EFI_STATUS
+EFIAPI
+MarvellYukonAddControllerData (
+ IN EFI_HANDLE Controller,
+ IN struct msk_softc *Data
+ )
+{
+ MSK_LINKED_DRV_BUF *DrvNode;
+ EFI_STATUS Status;
+
+ Status = MarvellYukonFindControllerNode (Controller, &DrvNode);
+ if (EFI_ERROR(Status)) {
+ Status = gBS->AllocatePool (EfiBootServicesData,
+ sizeof (MSK_LINKED_DRV_BUF),
+ (VOID**) &DrvNode);
+ if (!EFI_ERROR (Status)) {
+ DrvNode->Signature = MSK_DRV_SIGNATURE;
+ DrvNode->Controller = Controller;
+ DrvNode->Data = Data;
+ InsertTailList (&MarvellYukonDrvDataHead, &DrvNode->Link);
+ }
+ } else {
+ Status = EFI_ALREADY_STARTED;
+ }
+
+ return Status;
+}
+
+/**
+ Delete driver's data structure associated with controller
+
+ @param [in] Controller Controller Id.
+
+**/
+EFI_STATUS
+EFIAPI
+MarvellYukonDelControllerData (
+ IN EFI_HANDLE Controller
+ )
+{
+ MSK_LINKED_DRV_BUF *DrvNode;
+ EFI_STATUS Status;
+
+ Status = MarvellYukonFindControllerNode (Controller, &DrvNode);
+ if (!EFI_ERROR(Status)) {
+ RemoveEntryList (&DrvNode->Link);
+ gBS->FreePool (DrvNode);
+ }
+
+ return Status;
+}
+
+/**
+ Find node associated with controller
+
+ @param [in] Controller Controller Id.
+ @param [out] DrvLinkedBuff Controller's node.
+
+**/
+EFI_STATUS
+EFIAPI
+MarvellYukonFindControllerNode (
+ IN EFI_HANDLE Controller,
+ OUT MSK_LINKED_DRV_BUF **DrvLinkedBuff
+ )
+{
+ MSK_LINKED_DRV_BUF *DrvBuffNode;
+ EFI_STATUS Status;
+ LIST_ENTRY *Node;
+
+ Status = EFI_NOT_FOUND;
+
+ Node = GetFirstNode (&MarvellYukonDrvDataHead);
+ while (!IsNull (&MarvellYukonDrvDataHead, Node)) {
+ DrvBuffNode = MSK_DRV_INFO_FROM_THIS (Node);
+ if (DrvBuffNode->Controller == Controller) {
+ *DrvLinkedBuff = DrvBuffNode;
+ Status = EFI_SUCCESS;
+ break;
+ }
+ Node = GetNextNode (&MarvellYukonDrvDataHead, Node);
+ }
+
+ return Status;
+}
+
//
// Simple Network Protocol Driver Global Variables
//
@@ -487,7 +654,10 @@ InitializeMarvellYukonDriver (
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "Marvell Yukon: InitializeMarvellYukonDriver(): Driver binding failed\n"));
+ return Status;
}
+ InitializeListHead (&MarvellYukonDrvDataHead);
+
return Status;
}
diff --git a/Drivers/Net/MarvellYukonDxe/MarvellYukon.h b/Drivers/Net/MarvellYukonDxe/MarvellYukon.h
index e6110cb..07f5389 100644
--- a/Drivers/Net/MarvellYukonDxe/MarvellYukon.h
+++ b/Drivers/Net/MarvellYukonDxe/MarvellYukon.h
@@ -43,6 +43,7 @@ typedef struct {
EFI_LOCK Lock;
EFI_HANDLE Controller;
+ UINTN Port;
EFI_EVENT ExitBootEvent;
EFI_SIMPLE_NETWORK_PROTOCOL Snp;
@@ -58,6 +59,22 @@ typedef struct {
#define SNP_MEM_PAGES(x) (((x) - 1) / 4096 + 1)
+typedef struct {
+ UINT32 Signature;
+ LIST_ENTRY Link;
+ EFI_HANDLE Controller;
+ struct msk_softc *Data;
+} MSK_LINKED_DRV_BUF;
+
+#define MSK_DRV_SIGNATURE SIGNATURE_32 ('m', 's', 'k', 'c')
+
+#define MSK_DRV_INFO_FROM_THIS(a) \
+ CR (a, \
+ MSK_LINKED_DRV_BUF, \
+ Link, \
+ MSK_DRV_SIGNATURE \
+ );
+
//
// Global Variables
//
@@ -708,4 +725,58 @@ MarvellYukonNotifyExitBoot (
IN VOID *Context
);
+/**
+ Get driver's data structure associated with controller
+
+ @param [in] Controller Controller Id.
+ @param [out] Data Driver's data.
+
+**/
+EFI_STATUS
+EFIAPI
+MarvellYukonGetControllerData(
+ IN EFI_HANDLE Controller,
+ OUT struct msk_softc **Data
+ );
+
+/**
+ Add driver's data structure associated with controller
+
+ @param [in] Controller Controller Id.
+ @param [in] Data Driver's data.
+
+**/
+EFI_STATUS
+EFIAPI
+MarvellYukonAddControllerData (
+ IN EFI_HANDLE Controller,
+ IN struct msk_softc *
+ );
+
+/**
+ Delete driver's data structure associated with controller
+
+ @param [in] Controller Controller Id.
+
+**/
+EFI_STATUS
+EFIAPI
+MarvellYukonDelControllerData (
+ IN EFI_HANDLE Controller
+ );
+
+/**
+ Find node associated with controller
+
+ @param [in] Controller Controller Id.
+ @param [out] DrvLinkedBuff Controller's node.
+
+**/
+EFI_STATUS
+EFIAPI
+MarvellYukonFindControllerNode (
+ IN EFI_HANDLE Controller,
+ OUT MSK_LINKED_DRV_BUF **DrvLinkedBuff
+ );
+
/* _SNP_H_ */
diff --git a/Drivers/Net/MarvellYukonDxe/Snp.c b/Drivers/Net/MarvellYukonDxe/Snp.c
index 3d84f84..e4026d5 100644
--- a/Drivers/Net/MarvellYukonDxe/Snp.c
+++ b/Drivers/Net/MarvellYukonDxe/Snp.c
@@ -123,6 +123,7 @@ SnpGetStatus (
EFI_STATUS Status;
YUKON_DRIVER *Snp;
EFI_TPL OldTpl;
+ struct msk_softc *ScData;
if (This == NULL) {
return EFI_INVALID_PARAMETER;
@@ -133,6 +134,11 @@ SnpGetStatus (
return EFI_INVALID_PARAMETER;
}
+ Status = MarvellYukonGetControllerData(Snp->Controller, &ScData);
+ if (EFI_ERROR(Status)) {
+ return Status;
+ }
+
OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
switch (Snp->SnpMode.State) {
@@ -148,7 +154,7 @@ SnpGetStatus (
goto ON_EXIT;
}
- mskc_getstatus (InterruptStatus, TxBuf);
+ mskc_getstatus (ScData->msk_if[Snp->Port], InterruptStatus, TxBuf);
Status = EFI_SUCCESS;
ON_EXIT:
@@ -201,6 +207,7 @@ SnpInitialize (
EFI_STATUS Status;
YUKON_DRIVER *YukonDriver;
EFI_TPL OldTpl;
+ struct msk_softc *ScData;
DEBUG ((EFI_D_NET, "Marvell Yukon: SnpInitialize()\n"));
if (This == NULL) {
@@ -210,6 +217,11 @@ SnpInitialize (
YukonDriver = YUKON_DEV_FROM_THIS_SNP (This);
+ Status = MarvellYukonGetControllerData(YukonDriver->Controller, &ScData);
+ if (EFI_ERROR(Status)) {
+ return Status;
+ }
+
OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
switch (YukonDriver->SnpMode.State) {
@@ -230,7 +242,7 @@ SnpInitialize (
gBS->SetMem (YukonDriver->SnpMode.MCastFilter, sizeof YukonDriver->SnpMode.MCastFilter, 0);
gBS->CopyMem (&YukonDriver->SnpMode.CurrentAddress, &YukonDriver->SnpMode.PermanentAddress, sizeof (EFI_MAC_ADDRESS));
- Status = mskc_init ();
+ Status = mskc_init (ScData->msk_if[YukonDriver->Port]);
if (EFI_ERROR (Status)) {
goto ON_ERROR_RESTORE_TPL;
@@ -511,6 +523,7 @@ SnpReceive (
EFI_STATUS Status;
YUKON_DRIVER *Snp;
EFI_TPL OldTpl;
+ struct msk_softc *ScData;
if (This == NULL) {
return EFI_INVALID_PARAMETER;
@@ -518,6 +531,11 @@ SnpReceive (
Snp = YUKON_DEV_FROM_THIS_SNP (This);
+ Status = MarvellYukonGetControllerData(Snp->Controller, &ScData);
+ if (EFI_ERROR(Status)) {
+ return Status;
+ }
+
OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
switch (Snp->SnpMode.State) {
@@ -538,7 +556,7 @@ SnpReceive (
goto ON_EXIT;
}
- Status = mskc_receive (BufferSize, Buffer);
+ Status = mskc_receive (ScData->msk_if[Snp->Port], BufferSize, Buffer);
if (EFI_ERROR (Status)) {
if (Status == EFI_NOT_READY) {
goto ON_EXIT_NO_DEBUG;
@@ -681,6 +699,7 @@ SnpReceiveFilters (
YUKON_DRIVER *YukonDriver;
EFI_TPL OldTpl;
UINT32 newReceiveFilter;
+ struct msk_softc *ScData;
DEBUG ((EFI_D_NET, "Marvell Yukon: SnpReceiveFilters()\n"));
if (This == NULL) {
@@ -690,6 +709,11 @@ SnpReceiveFilters (
YukonDriver = YUKON_DEV_FROM_THIS_SNP (This);
+ Status = MarvellYukonGetControllerData(YukonDriver->Controller, &ScData);
+ if (EFI_ERROR(Status)) {
+ return Status;
+ }
+
OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
switch (YukonDriver->SnpMode.State) {
@@ -743,7 +767,7 @@ SnpReceiveFilters (
}
YukonDriver->SnpMode.ReceiveFilterSetting = newReceiveFilter;
- mskc_rxfilter (YukonDriver->SnpMode.ReceiveFilterSetting, MCastFilterCnt, MCastFilter);
+ mskc_rxfilter (ScData->msk_if[YukonDriver->Port], YukonDriver->SnpMode.ReceiveFilterSetting, MCastFilterCnt, MCastFilter);
Status = EFI_SUCCESS;
goto ON_EXIT;
@@ -860,6 +884,7 @@ SnpShutdown (
EFI_STATUS Status;
YUKON_DRIVER *YukonDriver;
EFI_TPL OldTpl;
+ struct msk_softc *ScData;
DEBUG ((EFI_D_NET, "Marvell Yukon: SnpShutdown()\n"));
//
@@ -872,6 +897,11 @@ SnpShutdown (
YukonDriver = YUKON_DEV_FROM_THIS_SNP (This);
+ Status = MarvellYukonGetControllerData(YukonDriver->Controller, &ScData);
+ if (EFI_ERROR(Status)) {
+ return Status;
+ }
+
OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
//
@@ -890,7 +920,7 @@ SnpShutdown (
goto ON_ERROR_RESTORE_TPL;
}
- mskc_shutdown ();
+ mskc_stop_if (ScData->msk_if[YukonDriver->Port]);
YukonDriver->SnpMode.State = EfiSimpleNetworkStarted;
Status = EFI_SUCCESS;
@@ -941,6 +971,7 @@ SnpStart (
YUKON_DRIVER *YukonDriver;
EFI_TPL OldTpl;
EFI_STATUS Status;
+ struct msk_softc *ScData;
DEBUG ((EFI_D_NET, "Marvell Yukon: SnpStart()\n"));
if (This == NULL) {
@@ -950,6 +981,11 @@ SnpStart (
YukonDriver = YUKON_DEV_FROM_THIS_SNP (This);
+ Status = MarvellYukonGetControllerData(YukonDriver->Controller, &ScData);
+ if (EFI_ERROR(Status)) {
+ return Status;
+ }
+
OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
switch (YukonDriver->SnpMode.State) {
@@ -966,7 +1002,7 @@ SnpStart (
goto ON_ERROR_RESTORE_TPL;
}
- Status = mskc_attach (YukonDriver->PciIo, &YukonDriver->SnpMode.PermanentAddress);
+ Status = mskc_attach_if (ScData->msk_if[YukonDriver->Port], YukonDriver->Port);
if (EFI_ERROR (Status)) {
goto ON_ERROR_RESTORE_TPL;
@@ -1244,6 +1280,7 @@ SnpStop (
EFI_STATUS Status;
YUKON_DRIVER *YukonDriver;
EFI_TPL OldTpl;
+ struct msk_softc *ScData;
DEBUG ((EFI_D_NET, "Marvell Yukon: SnpStop()\n"));
if (This == NULL) {
@@ -1253,6 +1290,11 @@ SnpStop (
YukonDriver = YUKON_DEV_FROM_THIS_SNP (This);
+ Status = MarvellYukonGetControllerData(YukonDriver->Controller, &ScData);
+ if (EFI_ERROR(Status)) {
+ return Status;
+ }
+
OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
switch (YukonDriver->SnpMode.State) {
@@ -1269,7 +1311,7 @@ SnpStop (
goto ON_ERROR_RESTORE_TPL;
}
- mskc_detach ();
+ mskc_detach_if (ScData->msk_if[YukonDriver->Port]);
YukonDriver->SnpMode.State = EfiSimpleNetworkStopped;
gBS->SetMem (&YukonDriver->SnpMode.CurrentAddress, sizeof (EFI_MAC_ADDRESS), 0);
Status = EFI_SUCCESS;
@@ -1354,6 +1396,7 @@ SnpTransmit (
EFI_TPL OldTpl;
ETHER_HEAD *Frame;
UINT16 ProtocolNet;
+ struct msk_softc *ScData;
DEBUG ((EFI_D_NET, "Marvell Yukon: SnpTransmit()\n"));
if (This == NULL) {
@@ -1366,6 +1409,11 @@ SnpTransmit (
return EFI_DEVICE_ERROR;
}
+ Status = MarvellYukonGetControllerData(YukonDriver->Controller, &ScData);
+ if (EFI_ERROR(Status)) {
+ return Status;
+ }
+
OldTpl = gBS->RaiseTPL (TPL_CALLBACK);
switch (YukonDriver->SnpMode.State) {
@@ -1407,7 +1455,7 @@ SnpTransmit (
gBS->CopyMem (&Frame->EtherType, &ProtocolNet, sizeof (UINT16));
}
- Status = mskc_transmit (BufferSize, Buffer);
+ Status = mskc_transmit (ScData->msk_if[YukonDriver->Port], BufferSize, Buffer);
ON_EXIT:
gBS->RestoreTPL (OldTpl);
diff --git a/Drivers/Net/MarvellYukonDxe/e1000phy.c b/Drivers/Net/MarvellYukonDxe/e1000phy.c
index dee4cdf..a3c74c4 100644
--- a/Drivers/Net/MarvellYukonDxe/e1000phy.c
+++ b/Drivers/Net/MarvellYukonDxe/e1000phy.c
@@ -57,6 +57,7 @@
#include <Library/MemoryAllocationLib.h>
#include <Library/DebugLib.h>
#include <Library/UefiBootServicesTableLib.h>
+#include <Library/BaseLib.h>
#include "if_media.h"
@@ -65,26 +66,22 @@
#include "e1000phyreg.h"
static EFI_STATUS e1000phy_probe (const struct mii_attach_args *ma);
-static void e1000phy_attach (const struct mii_attach_args *ma);
+static void e1000phy_attach (struct e1000phy_softc *, const struct mii_attach_args *ma);
+static void e1000phy_service (struct e1000phy_softc *, INTN);
+static void e1000phy_status (struct e1000phy_softc *);
+static void e1000phy_reset (struct e1000phy_softc *);
+static void e1000phy_mii_phy_auto (struct e1000phy_softc *);
+
+INTN msk_phy_readreg (VOID *, INTN);
+INTN msk_phy_writereg (VOID *, INTN, INTN);
+void msk_miibus_statchg (VOID *);
+
static const struct mii_phydesc * mii_phy_match (const struct mii_attach_args *ma,
const struct mii_phydesc *mpd);
static const struct mii_phydesc * mii_phy_match_gen (const struct mii_attach_args *ma,
const struct mii_phydesc *mpd, UINTN endlen);
static EFI_STATUS mii_phy_dev_probe (const struct mii_attach_args *ma, const struct mii_phydesc *mpd);
-
-struct e1000phy_softc {
- struct mii_softc mii_sc;
- INTN mii_model;
- const struct msk_mii_data *mmd;
-};
-
-struct e1000phy_softc *mPhySoftc;
-
-static void mii_phy_update (INTN);
-static void e1000phy_service (INTN);
-static void e1000phy_status (struct mii_softc *);
-static void e1000phy_reset (struct mii_softc *);
-static void e1000phy_mii_phy_auto (void);
+static void mii_phy_update (struct e1000phy_softc *, INTN);
static const struct mii_phydesc e1000phys[] = {
MII_PHY_DESC (MARVELL, E1000),
@@ -113,53 +110,70 @@ static const struct mii_phydesc e1000phys[] = {
EFI_STATUS
e1000_probe_and_attach (
struct mii_data *mii,
- const struct msk_mii_data *mmd
- )
+ const struct msk_mii_data *mmd,
+ void *sc_if,
+ void **rsc_phy
+ )
{
struct mii_attach_args ma;
INTN bmsr;
EFI_STATUS Status;
+ struct e1000phy_softc *sc_phy;
Status = gBS->AllocatePool (EfiBootServicesData,
sizeof (struct e1000phy_softc),
- (VOID**) &mPhySoftc);
+ (VOID**) &sc_phy);
if (EFI_ERROR (Status)) {
return Status;
}
- gBS->SetMem (mPhySoftc, sizeof (struct e1000phy_softc), 0);
- mPhySoftc->mmd = mmd;
+ gBS->SetMem (sc_phy, sizeof (struct e1000phy_softc), 0);
+ sc_phy->mmd = mmd;
+ sc_phy->sc_if = sc_if;
/*
* Check to see if there is a PHY at this address. Note,
* many braindead PHYs report 0/0 in their ID registers,
* so we test for media in the BMSR.
*/
- bmsr = PHY_READ (mPhySoftc, E1000_SR);
+ bmsr = PHY_READ (sc_phy, E1000_SR);
if (bmsr == 0 || bmsr == 0xffff || (bmsr & (E1000_SR_EXTENDED_STATUS|E1000_SR_MEDIAMASK)) == 0) {
/* Assume no PHY at this address. */
- gBS->FreePool (mPhySoftc);
+ gBS->FreePool (sc_phy);
return EFI_DEVICE_ERROR;
}
/*
* Extract the IDs.
*/
- ma.mii_id1 = PHY_READ (mPhySoftc, E1000_ID1);
- ma.mii_id2 = PHY_READ (mPhySoftc, E1000_ID2);
+ ma.mii_id1 = PHY_READ (sc_phy, E1000_ID1);
+ ma.mii_id2 = PHY_READ (sc_phy, E1000_ID2);
ma.mii_data = mii;
Status = e1000phy_probe (&ma);
if (EFI_ERROR (Status)) {
- gBS->FreePool (mPhySoftc);
+ gBS->FreePool (sc_phy);
return Status;
}
- e1000phy_attach (&ma);
+ e1000phy_attach (sc_phy, &ma);
+
+ *rsc_phy = sc_phy;
+
return EFI_SUCCESS;
}
+VOID
+e1000phy_detach (
+ struct e1000phy_softc *sc_phy
+ )
+{
+ if(sc_phy != NULL) {
+ gBS->FreePool(sc_phy);
+ }
+}
+
EFI_STATUS
e1000phy_probe (
const struct mii_attach_args *ma
@@ -170,25 +184,26 @@ e1000phy_probe (
static void
e1000phy_attach (
- const struct mii_attach_args *ma
+ struct e1000phy_softc *sc_phy,
+ const struct mii_attach_args *ma
)
{
struct mii_softc *sc;
- sc = &mPhySoftc->mii_sc;
+ sc = &sc_phy->mii_sc;
sc->mii_pdata = ma->mii_data;
sc->mii_anegticks = MII_ANEGTICKS_GIGE;
- mPhySoftc->mii_model = MII_MODEL (ma->mii_id2);
+ sc_phy->mii_model = MII_MODEL (ma->mii_id2);
- if (mPhySoftc->mmd != NULL && (mPhySoftc->mmd->mii_flags & MIIF_HAVEFIBER) != 0) {
+ if (sc_phy->mmd != NULL && (sc_phy->mmd->mii_flags & MIIF_HAVEFIBER) != 0) {
sc->mii_flags |= MIIF_HAVEFIBER;
}
- switch (mPhySoftc->mii_model) {
+ switch (sc_phy->mii_model) {
case MII_MODEL_MARVELL_E1011:
case MII_MODEL_MARVELL_E1112:
- if (PHY_READ (mPhySoftc, E1000_ESSR) & E1000_ESSR_FIBER_LINK) {
+ if (PHY_READ (sc_phy, E1000_ESSR) & E1000_ESSR_FIBER_LINK) {
sc->mii_flags |= MIIF_HAVEFIBER;
}
break;
@@ -204,49 +219,52 @@ e1000phy_attach (
* that information should be used to select default
* type of PHY.
*/
- PHY_WRITE (mPhySoftc, E1000_EADR, 0);
+ PHY_WRITE (sc_phy, E1000_EADR, 0);
break;
}
- e1000phy_reset (sc);
+ e1000phy_reset (sc_phy);
- sc->mii_capabilities = PHY_READ (mPhySoftc, E1000_SR) & 0xFFFFFFFF;
+ sc->mii_capabilities = PHY_READ (sc_phy, E1000_SR) & 0xFFFFFFFF;
if (sc->mii_capabilities & E1000_SR_EXTENDED_STATUS) {
- sc->mii_extcapabilities = PHY_READ (mPhySoftc, E1000_ESR);
+ sc->mii_extcapabilities = PHY_READ (sc_phy, E1000_ESR);
}
}
static void
e1000phy_reset (
- struct mii_softc *sc
+ struct e1000phy_softc *sc_phy
)
{
UINT16 reg;
UINT16 page;
+ struct mii_softc *sc;
- reg = PHY_READ (mPhySoftc, E1000_SCR);
+ sc = &sc_phy->mii_sc;
+
+ reg = PHY_READ (sc_phy, E1000_SCR);
if ((sc->mii_flags & MIIF_HAVEFIBER) != 0) {
reg &= ~E1000_SCR_AUTO_X_MODE;
- PHY_WRITE (mPhySoftc, E1000_SCR, reg);
- if (mPhySoftc->mii_model == MII_MODEL_MARVELL_E1112) {
+ PHY_WRITE (sc_phy, E1000_SCR, reg);
+ if (sc_phy->mii_model == MII_MODEL_MARVELL_E1112) {
// Select 1000BASE-X only mode.
- page = PHY_READ (mPhySoftc, E1000_EADR);
- PHY_WRITE (mPhySoftc, E1000_EADR, 2);
- reg = PHY_READ (mPhySoftc, E1000_SCR);
+ page = PHY_READ (sc_phy, E1000_EADR);
+ PHY_WRITE (sc_phy, E1000_EADR, 2);
+ reg = PHY_READ (sc_phy, E1000_SCR);
reg &= ~E1000_SCR_MODE_MASK;
reg |= E1000_SCR_MODE_1000BX;
- PHY_WRITE (mPhySoftc, E1000_SCR, reg);
- if (mPhySoftc->mmd != NULL && mPhySoftc->mmd->pmd == 'P') {
+ PHY_WRITE (sc_phy, E1000_SCR, reg);
+ if (sc_phy->mmd != NULL && sc_phy->mmd->pmd == 'P') {
// Set SIGDET polarity low for SFP module
- PHY_WRITE (mPhySoftc, E1000_EADR, 1);
- reg = PHY_READ (mPhySoftc, E1000_SCR);
+ PHY_WRITE (sc_phy, E1000_EADR, 1);
+ reg = PHY_READ (sc_phy, E1000_SCR);
reg |= E1000_SCR_FIB_SIGDET_POLARITY;
- PHY_WRITE (mPhySoftc, E1000_SCR, reg);
+ PHY_WRITE (sc_phy, E1000_SCR, reg);
}
- PHY_WRITE (mPhySoftc, E1000_EADR, page);
+ PHY_WRITE (sc_phy, E1000_EADR, page);
}
} else {
- switch (mPhySoftc->mii_model) {
+ switch (sc_phy->mii_model) {
case MII_MODEL_MARVELL_E1111:
case MII_MODEL_MARVELL_E1112:
case MII_MODEL_MARVELL_E1116:
@@ -256,7 +274,7 @@ e1000phy_reset (
// Disable energy detect mode
reg &= ~E1000_SCR_EN_DETECT_MASK;
reg |= E1000_SCR_AUTO_X_MODE;
- if (mPhySoftc->mii_model == MII_MODEL_MARVELL_E1116)
+ if (sc_phy->mii_model == MII_MODEL_MARVELL_E1116)
reg &= ~E1000_SCR_POWER_DOWN;
reg |= E1000_SCR_ASSERT_CRS_ON_TX;
break;
@@ -270,81 +288,82 @@ e1000phy_reset (
E1000_SCR_SCRAMBLER_DISABLE);
reg |= E1000_SCR_LPNP;
// XXX Enable class A driver for Yukon FE+ A0
- PHY_WRITE (mPhySoftc, 0x1C, PHY_READ (mPhySoftc, 0x1C) | 0x0001);
+ PHY_WRITE (sc_phy, 0x1C, PHY_READ (sc_phy, 0x1C) | 0x0001);
break;
default:
reg &= ~E1000_SCR_AUTO_X_MODE;
reg |= E1000_SCR_ASSERT_CRS_ON_TX;
break;
}
- if (mPhySoftc->mii_model != MII_MODEL_MARVELL_E3016) {
+ if (sc_phy->mii_model != MII_MODEL_MARVELL_E3016) {
/* Auto correction for reversed cable polarity. */
reg &= ~E1000_SCR_POLARITY_REVERSAL;
}
- PHY_WRITE (mPhySoftc, E1000_SCR, reg);
+ PHY_WRITE (sc_phy, E1000_SCR, reg);
- if (mPhySoftc->mii_model == MII_MODEL_MARVELL_E1116 ||
- mPhySoftc->mii_model == MII_MODEL_MARVELL_E1149) {
- PHY_WRITE (mPhySoftc, E1000_EADR, 2);
- reg = PHY_READ (mPhySoftc, E1000_SCR);
+ if (sc_phy->mii_model == MII_MODEL_MARVELL_E1116 ||
+ sc_phy->mii_model == MII_MODEL_MARVELL_E1149) {
+ PHY_WRITE (sc_phy, E1000_EADR, 2);
+ reg = PHY_READ (sc_phy, E1000_SCR);
reg |= E1000_SCR_RGMII_POWER_UP;
- PHY_WRITE (mPhySoftc, E1000_SCR, reg);
- PHY_WRITE (mPhySoftc, E1000_EADR, 0);
+ PHY_WRITE (sc_phy, E1000_SCR, reg);
+ PHY_WRITE (sc_phy, E1000_EADR, 0);
}
}
- switch (mPhySoftc->mii_model) {
+ switch (sc_phy->mii_model) {
case MII_MODEL_MARVELL_E3082:
case MII_MODEL_MARVELL_E1112:
case MII_MODEL_MARVELL_E1118:
break;
case MII_MODEL_MARVELL_E1116:
- page = PHY_READ (mPhySoftc, E1000_EADR);
+ page = PHY_READ (sc_phy, E1000_EADR);
/* Select page 3, LED control register. */
- PHY_WRITE (mPhySoftc, E1000_EADR, 3);
- PHY_WRITE (mPhySoftc, E1000_SCR,
+ PHY_WRITE (sc_phy, E1000_EADR, 3);
+ PHY_WRITE (sc_phy, E1000_SCR,
E1000_SCR_LED_LOS (1) | /* Link/Act */
E1000_SCR_LED_INIT (8) | /* 10Mbps */
E1000_SCR_LED_STAT1 (7) | /* 100Mbps */
E1000_SCR_LED_STAT0 (7)); /* 1000Mbps */
/* Set blink rate. */
- PHY_WRITE (mPhySoftc, E1000_IER, E1000_PULSE_DUR (E1000_PULSE_170MS) | E1000_BLINK_RATE (E1000_BLINK_84MS));
- PHY_WRITE (mPhySoftc, E1000_EADR, page);
+ PHY_WRITE (sc_phy, E1000_IER, E1000_PULSE_DUR (E1000_PULSE_170MS) | E1000_BLINK_RATE (E1000_BLINK_84MS));
+ PHY_WRITE (sc_phy, E1000_EADR, page);
break;
case MII_MODEL_MARVELL_E3016:
/* LED2 -> ACT, LED1 -> LINK, LED0 -> SPEED. */
- PHY_WRITE (mPhySoftc, 0x16, 0x0B << 8 | 0x05 << 4 | 0x04);
+ PHY_WRITE (sc_phy, 0x16, 0x0B << 8 | 0x05 << 4 | 0x04);
/* Integrated register calibration workaround. */
- PHY_WRITE (mPhySoftc, 0x1D, 17);
- PHY_WRITE (mPhySoftc, 0x1E, 0x3F60);
+ PHY_WRITE (sc_phy, 0x1D, 17);
+ PHY_WRITE (sc_phy, 0x1E, 0x3F60);
break;
default:
/* Force TX_CLK to 25MHz clock. */
- reg = PHY_READ (mPhySoftc, E1000_ESCR);
+ reg = PHY_READ (sc_phy, E1000_ESCR);
reg |= E1000_ESCR_TX_CLK_25;
- PHY_WRITE (mPhySoftc, E1000_ESCR, reg);
+ PHY_WRITE (sc_phy, E1000_ESCR, reg);
break;
}
/* Reset the PHY so all changes take effect. */
- reg = PHY_READ (mPhySoftc, E1000_CR);
+ reg = PHY_READ (sc_phy, E1000_CR);
reg |= E1000_CR_RESET;
- PHY_WRITE (mPhySoftc, E1000_CR, reg);
+ PHY_WRITE (sc_phy, E1000_CR, reg);
}
static void
mii_phy_update (
- INTN cmd
+ struct e1000phy_softc *sc_phy,
+ INTN cmd
)
{
- struct mii_softc *sc = &mPhySoftc->mii_sc;
+ struct mii_softc *sc = &sc_phy->mii_sc;
struct mii_data *mii = sc->mii_pdata;
if (sc->mii_media_active != mii->mii_media_active ||
sc->mii_media_status != mii->mii_media_status ||
cmd == MII_MEDIACHG)
{
- msk_miibus_statchg (mPhySoftc->mmd->port);
+ msk_miibus_statchg (sc_phy->sc_if);
sc->mii_media_active = mii->mii_media_active;
sc->mii_media_status = mii->mii_media_status;
}
@@ -352,31 +371,37 @@ mii_phy_update (
void
e1000phy_tick (
- VOID
+ struct e1000phy_softc *sc_phy
)
{
- e1000phy_service (MII_TICK);
+ e1000phy_service (sc_phy, MII_TICK);
}
void
e1000phy_mediachg (
- VOID
+ struct e1000phy_softc *sc_phy
)
{
- struct mii_data *mii = mPhySoftc->mii_sc.mii_pdata;
+ struct mii_data *mii;
+
+ mii = sc_phy->mii_sc.mii_pdata;
+
mii->mii_media_status = 0;
mii->mii_media_active = IFM_NONE;
- e1000phy_service (MII_MEDIACHG);
+ e1000phy_service (sc_phy, MII_MEDIACHG);
}
static void
e1000phy_service (
- INTN cmd
- )
+ struct e1000phy_softc *sc_phy,
+ INTN cmd
+ )
{
- struct mii_softc *sc = &mPhySoftc->mii_sc;
+ struct mii_softc *sc;
INTN reg;
+ sc = &sc_phy->mii_sc;
+
switch (cmd) {
case MII_POLLSTAT:
break;
@@ -385,7 +410,7 @@ e1000phy_service (
//
// Always try to auto-negotiate
//
- e1000phy_mii_phy_auto ();
+ e1000phy_mii_phy_auto (sc_phy);
break;
case MII_TICK:
@@ -393,7 +418,7 @@ e1000phy_service (
* check for link.
* Read the status register twice; Link Status is latch-low.
*/
- reg = PHY_READ (mPhySoftc, E1000_SR) | PHY_READ (mPhySoftc, E1000_SR);
+ reg = PHY_READ (sc_phy, E1000_SR) | PHY_READ (sc_phy, E1000_SR);
if (reg & E1000_SR_LINK_STATUS) {
sc->mii_ticks = 0;
break;
@@ -411,24 +436,25 @@ e1000phy_service (
// Restart the auto-negotiation
//
sc->mii_ticks = 0;
- e1000phy_reset (sc);
- e1000phy_mii_phy_auto ();
+ e1000phy_reset (sc_phy);
+ e1000phy_mii_phy_auto (sc_phy);
break;
}
/* Update the media status. */
- e1000phy_status (sc);
+ e1000phy_status (sc_phy);
/* Callback if something changed. */
- mii_phy_update (cmd);
+ mii_phy_update (sc_phy, cmd);
}
static void
e1000phy_status (
- struct mii_softc *sc
+ struct e1000phy_softc *sc_phy
)
{
- struct mii_data *mii = sc->mii_pdata;
+ struct mii_softc *sc;
+ struct mii_data *mii;
INTN bmcr;
INTN bmsr;
INTN gsr;
@@ -436,12 +462,15 @@ e1000phy_status (
INTN ar;
INTN lpar;
+ sc = &sc_phy->mii_sc;
+ mii = sc->mii_pdata;
+
mii->mii_media_status = IFM_AVALID;
mii->mii_media_active = IFM_ETHER;
- bmsr = PHY_READ (mPhySoftc, E1000_SR) | PHY_READ (mPhySoftc, E1000_SR);
- bmcr = PHY_READ (mPhySoftc, E1000_CR);
- ssr = PHY_READ (mPhySoftc, E1000_SSR);
+ bmsr = PHY_READ (sc_phy, E1000_SR) | PHY_READ (sc_phy, E1000_SR);
+ bmcr = PHY_READ (sc_phy, E1000_CR);
+ ssr = PHY_READ (sc_phy, E1000_SSR);
if (bmsr & E1000_SR_LINK_STATUS) {
DEBUG ((EFI_D_NET, "Marvell Yukon: e1000phy_status, link up\n"));
@@ -489,8 +518,8 @@ e1000phy_status (
}
if ((sc->mii_flags & MIIF_HAVEFIBER) == 0) {
- ar = PHY_READ (mPhySoftc, E1000_AR);
- lpar = PHY_READ (mPhySoftc, E1000_LPAR);
+ ar = PHY_READ (sc_phy, E1000_AR);
+ lpar = PHY_READ (sc_phy, E1000_LPAR);
/* FLAG0==rx-flow-control FLAG1==tx-flow-control */
if ((ar & E1000_AR_PAUSE) && (lpar & E1000_LPAR_PAUSE)) {
mii->mii_media_active |= IFM_FLAG0 | IFM_FLAG1;
@@ -506,8 +535,8 @@ e1000phy_status (
/* FLAG2 : local PHY resolved to MASTER */
if ((IFM_SUBTYPE (mii->mii_media_active) == IFM_1000_T) ||
(IFM_SUBTYPE (mii->mii_media_active) == IFM_1000_SX)) {
- PHY_READ (mPhySoftc, E1000_1GSR);
- gsr = PHY_READ (mPhySoftc, E1000_1GSR);
+ PHY_READ (sc_phy, E1000_1GSR);
+ gsr = PHY_READ (sc_phy, E1000_1GSR);
if ((gsr & E1000_1GSR_MS_CONFIG_RES) != 0) {
mii->mii_media_active |= IFM_FLAG2;
}
@@ -516,29 +545,29 @@ e1000phy_status (
static void
e1000phy_mii_phy_auto (
- VOID
+ struct e1000phy_softc *sc_phy
)
{
struct mii_softc *sc;
UINT16 reg;
DEBUG ((EFI_D_NET, "Marvell Yukon: e1000phy_mii_phy_auto negotiation started\n"));
- sc = &mPhySoftc->mii_sc;
+ sc = &sc_phy->mii_sc;
if ((sc->mii_flags & MIIF_HAVEFIBER) == 0) {
- reg = PHY_READ (mPhySoftc, E1000_AR);
+ reg = PHY_READ (sc_phy, E1000_AR);
reg |= E1000_AR_10T | E1000_AR_10T_FD |
E1000_AR_100TX | E1000_AR_100TX_FD |
E1000_AR_PAUSE | E1000_AR_ASM_DIR;
- PHY_WRITE (mPhySoftc, E1000_AR, reg | E1000_AR_SELECTOR_FIELD);
+ PHY_WRITE (sc_phy, E1000_AR, reg | E1000_AR_SELECTOR_FIELD);
} else {
- PHY_WRITE (mPhySoftc, E1000_AR, E1000_FA_1000X_FD | E1000_FA_1000X | E1000_FA_SYM_PAUSE | E1000_FA_ASYM_PAUSE);
+ PHY_WRITE (sc_phy, E1000_AR, E1000_FA_1000X_FD | E1000_FA_1000X | E1000_FA_SYM_PAUSE | E1000_FA_ASYM_PAUSE);
}
if ((sc->mii_extcapabilities & (E1000_ESR_1000T_FD | E1000_ESR_1000T)) != 0) {
- PHY_WRITE (mPhySoftc, E1000_1GCR, E1000_1GCR_1000T_FD | E1000_1GCR_1000T);
+ PHY_WRITE (sc_phy, E1000_1GCR, E1000_1GCR_1000T_FD | E1000_1GCR_1000T);
}
- PHY_WRITE (mPhySoftc, E1000_CR, E1000_CR_AUTO_NEG_ENABLE | E1000_CR_RESTART_AUTO_NEG);
+ PHY_WRITE (sc_phy, E1000_CR, E1000_CR_AUTO_NEG_ENABLE | E1000_CR_RESTART_AUTO_NEG);
}
//
diff --git a/Drivers/Net/MarvellYukonDxe/e1000phyreg.h b/Drivers/Net/MarvellYukonDxe/e1000phyreg.h
index a87b1f1..e53ca2a 100644
--- a/Drivers/Net/MarvellYukonDxe/e1000phyreg.h
+++ b/Drivers/Net/MarvellYukonDxe/e1000phyreg.h
@@ -82,6 +82,9 @@
* Marvell E1000 PHY registers
*/
+#ifndef _E1000_PHYREG_H_
+#define _E1000_PHYREG_H_
+
#define E1000_MAX_REG_ADDRESS 0x1F
#define E1000_CR 0x00 /* control register */
@@ -396,3 +399,12 @@
#define E1000_ESSR_GMII_FIBER 0x0007
#define E1000_ESSR_TBI_COPPER 0x000d
#define E1000_ESSR_TBI_FIBER 0x0005
+
+struct e1000phy_softc {
+ struct mii_softc mii_sc;
+ INTN mii_model;
+ const struct msk_mii_data *mmd;
+ void *sc_if; /* parent logical controller */
+};
+
+#endif /* _E1000_PHYREG_H_ */
diff --git a/Drivers/Net/MarvellYukonDxe/if_msk.c b/Drivers/Net/MarvellYukonDxe/if_msk.c
index d23f893..ca130cd 100644
--- a/Drivers/Net/MarvellYukonDxe/if_msk.c
+++ b/Drivers/Net/MarvellYukonDxe/if_msk.c
@@ -121,12 +121,6 @@
#include "if_mskreg.h"
#include "if_msk.h"
-//
-// Global Variables
-//
-static EFI_PCI_IO_PROTOCOL *mPciIo;
-static struct msk_softc *mSoftc;
-
#define MSK_CSUM_FEATURES (CSUM_TCP | CSUM_UDP)
/*
@@ -189,32 +183,34 @@ static const CHAR8 *model_name[] = {
//
// Forward declarations
//
-static VOID mskc_setup_rambuffer (VOID);
-static VOID mskc_reset (VOID);
+static VOID mskc_setup_rambuffer (struct msk_softc *);
+static VOID mskc_reset (struct msk_softc *);
-static EFI_STATUS msk_attach (INT32);
-static VOID msk_detach (INT32);
+EFI_STATUS mskc_attach_if (struct msk_if_softc *, UINTN);
+VOID mskc_detach_if (struct msk_if_softc *);
static VOID mskc_tick (IN EFI_EVENT, IN VOID*);
-static VOID msk_intr (VOID);
+static VOID msk_intr (struct msk_softc *);
static VOID msk_intr_phy (struct msk_if_softc *);
static VOID msk_intr_gmac (struct msk_if_softc *);
static __inline VOID msk_rxput (struct msk_if_softc *);
-static INTN msk_handle_events (VOID);
+static INTN msk_handle_events (struct msk_softc *);
static VOID msk_handle_hwerr (struct msk_if_softc *, UINT32);
-static VOID msk_intr_hwerr (VOID);
+static VOID msk_intr_hwerr (struct msk_softc *);
static VOID msk_rxeof (struct msk_if_softc *, UINT32, UINT32, INTN);
static VOID msk_txeof (struct msk_if_softc *, INTN);
static EFI_STATUS msk_encap (struct msk_if_softc *, MSK_SYSTEM_BUF *);
-static VOID msk_start (INT32);
-static VOID msk_set_prefetch (INTN, EFI_PHYSICAL_ADDRESS, UINT32);
+static VOID msk_start (struct msk_if_softc *);
+static VOID msk_set_prefetch (struct msk_if_softc *, INTN, EFI_PHYSICAL_ADDRESS, UINT32);
static VOID msk_set_rambuffer (struct msk_if_softc *);
static VOID msk_set_tx_stfwd (struct msk_if_softc *);
static EFI_STATUS msk_init (struct msk_if_softc *);
-static VOID msk_stop (struct msk_if_softc *);
+VOID mskc_stop_if (struct msk_if_softc *);
static VOID msk_phy_power (struct msk_softc *, INTN);
-static EFI_STATUS msk_status_dma_alloc (VOID);
-static VOID msk_status_dma_free (VOID);
+INTN msk_phy_readreg (struct msk_if_softc *, INTN);
+INTN msk_phy_writereg (struct msk_if_softc *, INTN, INTN);
+static EFI_STATUS msk_status_dma_alloc (struct msk_softc *);
+static VOID msk_status_dma_free (struct msk_softc *);
static EFI_STATUS msk_txrx_dma_alloc (struct msk_if_softc *);
static VOID msk_txrx_dma_free (struct msk_if_softc *);
static EFI_STATUS msk_init_rx_ring (struct msk_if_softc *);
@@ -232,6 +228,12 @@ static VOID msk_setvlan (struct msk_if_softc *);
static VOID msk_stats_clear (struct msk_if_softc *);
static VOID msk_stats_update (struct msk_if_softc *);
+static VOID clear_pci_errors (struct msk_softc *);
+
+EFI_STATUS e1000_probe_and_attach (struct mii_data *, const struct msk_mii_data *, VOID *, VOID **);
+void e1000phy_tick (VOID *);
+void e1000phy_mediachg (VOID *);
+EFI_STATUS e1000phy_detach (VOID *);
//
// Functions
@@ -239,20 +241,25 @@ static VOID msk_stats_update (struct msk_if_softc *);
INTN
msk_phy_readreg (
- INTN port,
- INTN reg
+ struct msk_if_softc *sc_if,
+ INTN reg
)
{
INTN i;
INTN val;
+ INTN port;
+ struct msk_softc *sc;
- GMAC_WRITE_2 (mSoftc, port, GM_SMI_CTRL, GM_SMI_CT_PHY_AD(PHY_ADDR_MARV) | GM_SMI_CT_REG_AD(reg) | GM_SMI_CT_OP_RD);
+ sc = sc_if->msk_softc;
+ port = sc_if->msk_md.port;
+
+ GMAC_WRITE_2 (sc, port, GM_SMI_CTRL, GM_SMI_CT_PHY_AD(PHY_ADDR_MARV) | GM_SMI_CT_REG_AD(reg) | GM_SMI_CT_OP_RD);
for (i = 0; i < MSK_TIMEOUT; i++) {
gBS->Stall (1);
- val = GMAC_READ_2 (mSoftc, port, GM_SMI_CTRL);
+ val = GMAC_READ_2 (sc, port, GM_SMI_CTRL);
if ((val & GM_SMI_CT_RD_VAL) != 0) {
- val = GMAC_READ_2 (mSoftc, port, GM_SMI_DATA);
+ val = GMAC_READ_2 (sc, port, GM_SMI_DATA);
break;
}
}
@@ -267,18 +274,23 @@ msk_phy_readreg (
INTN
msk_phy_writereg (
- INTN port,
+ struct msk_if_softc *sc_if,
INTN reg,
INTN val
)
{
INTN i;
+ INTN port;
+ struct msk_softc *sc;
+
+ sc = sc_if->msk_softc;
+ port = sc_if->msk_md.port;
- GMAC_WRITE_2 (mSoftc, port, GM_SMI_DATA, val);
- GMAC_WRITE_2 (mSoftc, port, GM_SMI_CTRL, GM_SMI_CT_PHY_AD(PHY_ADDR_MARV) | GM_SMI_CT_REG_AD(reg));
+ GMAC_WRITE_2 (sc, port, GM_SMI_DATA, val);
+ GMAC_WRITE_2 (sc, port, GM_SMI_CTRL, GM_SMI_CT_PHY_AD(PHY_ADDR_MARV) | GM_SMI_CT_REG_AD(reg));
for (i = 0; i < MSK_TIMEOUT; i++) {
gBS->Stall (1);
- if ((GMAC_READ_2 (mSoftc, port, GM_SMI_CTRL) & GM_SMI_CT_BUSY) == 0) {
+ if ((GMAC_READ_2 (sc, port, GM_SMI_CTRL) & GM_SMI_CT_BUSY) == 0) {
break;
}
}
@@ -291,13 +303,17 @@ msk_phy_writereg (
VOID
msk_miibus_statchg (
- INTN port
+ struct msk_if_softc *sc_if
)
{
- struct msk_if_softc *sc_if = mSoftc->msk_if[port];
- struct mii_data *mii = &sc_if->mii_d;
+ struct mii_data *mii;
UINT32 gmac;
+ UINTN port;
+ struct msk_softc *sc;
+ sc = sc_if->msk_softc;
+ port = sc_if->msk_md.port;
+ mii = &sc_if->mii_d;
sc_if->msk_flags &= ~MSK_FLAG_LINK;
if ((mii->mii_media_status & (IFM_AVALID | IFM_ACTIVE)) == (IFM_AVALID | IFM_ACTIVE)) {
@@ -325,7 +341,7 @@ msk_miibus_statchg (
// Enable Tx FIFO Underrun
DEBUG ((EFI_D_NET, "Marvell Yukon: msk_miibus_statchg, link up\n"));
- CSR_WRITE_1 (mSoftc, MR_ADDR (port, GMAC_IRQ_MSK), GM_IS_TX_FF_UR | GM_IS_RX_FF_OR);
+ CSR_WRITE_1 (sc, MR_ADDR (port, GMAC_IRQ_MSK), GM_IS_TX_FF_UR | GM_IS_RX_FF_OR);
//
// Because mii(4) notify msk (4) that it detected link status
// change, there is no need to enable automatic
@@ -358,33 +374,33 @@ msk_miibus_statchg (
gmac |= GM_GPCR_FC_RX_DIS | GM_GPCR_FC_TX_DIS;
}
gmac |= GM_GPCR_RX_ENA | GM_GPCR_TX_ENA;
- GMAC_WRITE_2 (mSoftc, port, GM_GP_CTRL, gmac);
+ GMAC_WRITE_2 (sc, port, GM_GP_CTRL, gmac);
// Read again to ensure writing
- GMAC_READ_2 (mSoftc, port, GM_GP_CTRL);
+ GMAC_READ_2 (sc, port, GM_GP_CTRL);
gmac = GMC_PAUSE_OFF;
if ((IFM_OPTIONS (mii->mii_media_active) & IFM_FDX) != 0) {
if ((IFM_OPTIONS (mii->mii_media_active) & IFM_FLAG0) != 0) {
gmac = GMC_PAUSE_ON;
}
}
- CSR_WRITE_4 (mSoftc, MR_ADDR (port, GMAC_CTRL), gmac);
+ CSR_WRITE_4 (sc, MR_ADDR (port, GMAC_CTRL), gmac);
// Enable PHY interrupt for FIFO underrun/overflow
- msk_phy_writereg (port, PHY_MARV_INT_MASK, PHY_M_IS_FIFO_ERROR);
+ msk_phy_writereg (sc_if, PHY_MARV_INT_MASK, PHY_M_IS_FIFO_ERROR);
} else {
//
// Link state changed to down.
// Disable PHY interrupts.
//
DEBUG ((EFI_D_NET, "Marvell Yukon: msk_miibus_statchg, link down\n"));
- msk_phy_writereg (port, PHY_MARV_INT_MASK, 0);
+ msk_phy_writereg (sc_if, PHY_MARV_INT_MASK, 0);
// Disable Rx/Tx MAC
- gmac = GMAC_READ_2 (mSoftc, port, GM_GP_CTRL);
+ gmac = GMAC_READ_2 (sc, port, GM_GP_CTRL);
if ((GM_GPCR_RX_ENA | GM_GPCR_TX_ENA) != 0) {
gmac &= ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA);
- GMAC_WRITE_2 (mSoftc, port, GM_GP_CTRL, gmac);
+ GMAC_WRITE_2 (sc, port, GM_GP_CTRL, gmac);
// Read again to ensure writing
- GMAC_READ_2 (mSoftc, port, GM_GP_CTRL);
+ GMAC_READ_2 (sc, port, GM_GP_CTRL);
}
}
}
@@ -418,12 +434,13 @@ ether_crc32_be (
VOID
mskc_rxfilter (
+ struct msk_if_softc *sc_if,
UINT32 FilterFlags,
UINTN MCastFilterCnt,
EFI_MAC_ADDRESS *MCastFilter
)
{
- msk_rxfilter (mSoftc->msk_if[MSK_PORT_A], FilterFlags, MCastFilterCnt, MCastFilter);
+ msk_rxfilter (sc_if, FilterFlags, MCastFilterCnt, MCastFilter);
}
static VOID
@@ -437,10 +454,14 @@ msk_rxfilter (
UINT32 mchash[2];
UINT32 crc;
UINT16 mode;
- INTN port = sc_if->msk_md.port;
+ INTN port;
+ struct msk_softc *sc;
+
+ sc = sc_if->msk_softc;
+ port = sc_if->msk_md.port;
gBS->SetMem (mchash, sizeof (mchash), 0);
- mode = GMAC_READ_2 (mSoftc, port, GM_RX_CTRL);
+ mode = GMAC_READ_2 (sc, port, GM_RX_CTRL);
if ((FilterFlags & EFI_SIMPLE_NETWORK_RECEIVE_PROMISCUOUS) != 0) {
mode &= ~(GM_RXCR_UCF_ENA | GM_RXCR_MCF_ENA);
}
@@ -462,11 +483,11 @@ msk_rxfilter (
}
}
- GMAC_WRITE_2 (mSoftc, port, GM_MC_ADDR_H1, mchash[0] & 0xffff );
- GMAC_WRITE_2 (mSoftc, port, GM_MC_ADDR_H2, (mchash[0] >> 16) & 0xffff );
- GMAC_WRITE_2 (mSoftc, port, GM_MC_ADDR_H3, mchash[1] & 0xffff );
- GMAC_WRITE_2 (mSoftc, port, GM_MC_ADDR_H4, (mchash[1] >> 16) & 0xffff );
- GMAC_WRITE_2 (mSoftc, port, GM_RX_CTRL, mode );
+ GMAC_WRITE_2 (sc, port, GM_MC_ADDR_H1, mchash[0] & 0xffff );
+ GMAC_WRITE_2 (sc, port, GM_MC_ADDR_H2, (mchash[0] >> 16) & 0xffff );
+ GMAC_WRITE_2 (sc, port, GM_MC_ADDR_H3, mchash[1] & 0xffff );
+ GMAC_WRITE_2 (sc, port, GM_MC_ADDR_H4, (mchash[1] >> 16) & 0xffff );
+ GMAC_WRITE_2 (sc, port, GM_RX_CTRL, mode );
}
static
@@ -478,8 +499,8 @@ msk_setvlan (
//
// Disable automatic VLAN tagging/stripping
//
- CSR_WRITE_4 (mSoftc, MR_ADDR (sc_if->msk_md.port, RX_GMF_CTRL_T), RX_VLAN_STRIP_OFF);
- CSR_WRITE_4 (mSoftc, MR_ADDR (sc_if->msk_md.port, TX_GMF_CTRL_T), TX_VLAN_TAG_OFF);
+ CSR_WRITE_4 (sc_if->msk_softc, MR_ADDR (sc_if->msk_md.port, RX_GMF_CTRL_T), RX_VLAN_STRIP_OFF);
+ CSR_WRITE_4 (sc_if->msk_softc, MR_ADDR (sc_if->msk_md.port, TX_GMF_CTRL_T), TX_VLAN_TAG_OFF);
}
static
@@ -520,7 +541,7 @@ msk_init_rx_ring (
// Update prefetch unit.
sc_if->msk_cdata.msk_rx_prod = MSK_RX_RING_CNT - 1;
- CSR_WRITE_2 (mSoftc, Y2_PREF_Q_ADDR (sc_if->msk_rxq, PREF_UNIT_PUT_IDX_REG), sc_if->msk_cdata.msk_rx_prod);
+ CSR_WRITE_2 (sc_if->msk_softc, Y2_PREF_Q_ADDR (sc_if->msk_rxq, PREF_UNIT_PUT_IDX_REG), sc_if->msk_cdata.msk_rx_prod);
return EFI_SUCCESS;
}
@@ -589,8 +610,10 @@ msk_newbuf (
VOID *Buffer;
VOID *Mapping;
EFI_PHYSICAL_ADDRESS PhysAddr;
+ EFI_PCI_IO_PROTOCOL *PciIo;
EFI_STATUS Status;
+ PciIo = sc_if->msk_softc->PciIo;
Length = MAX_SUPPORTED_PACKET_SIZE;
rxd = &sc_if->msk_cdata.msk_rxdesc[idx];
@@ -601,7 +624,7 @@ msk_newbuf (
}
gBS->SetMem (Buffer, Length, 0);
- Status = mPciIo->Map (mPciIo, EfiPciIoOperationBusMasterWrite, Buffer, &Length, &PhysAddr, &Mapping);
+ Status = PciIo->Map (PciIo, EfiPciIoOperationBusMasterWrite, Buffer, &Length, &PhysAddr, &Mapping);
if (EFI_ERROR (Status)) {
gBS->FreePool (Buffer);
return Status;
@@ -663,38 +686,38 @@ mskc_probe (
static
VOID
mskc_setup_rambuffer (
- VOID
+ struct msk_softc *sc
)
{
INTN next;
INTN i;
/* Get adapter SRAM size. */
- mSoftc->msk_ramsize = CSR_READ_1 (mSoftc, B2_E_0) * 4;
- DEBUG ((EFI_D_NET, "Marvell Yukon: RAM buffer size : %dKB\n", mSoftc->msk_ramsize));
- if (mSoftc->msk_ramsize == 0) {
+ sc->msk_ramsize = CSR_READ_1 (sc, B2_E_0) * 4;
+ DEBUG ((EFI_D_NET, "Marvell Yukon: RAM buffer size : %dKB\n", sc->msk_ramsize));
+ if (sc->msk_ramsize == 0) {
return;
}
- mSoftc->msk_pflags |= MSK_FLAG_RAMBUF;
+ sc->msk_pflags |= MSK_FLAG_RAMBUF;
/*
* Give receiver 2/3 of memory and round down to the multiple
* of 1024. Tx/Rx RAM buffer size of Yukon II shoud be multiple
* of 1024.
*/
- mSoftc->msk_rxqsize = (((mSoftc->msk_ramsize * 1024 * 2) / 3) / 1024) * 1024;
- mSoftc->msk_txqsize = (mSoftc->msk_ramsize * 1024) - mSoftc->msk_rxqsize;
- for (i = 0, next = 0; i < mSoftc->msk_num_port; i++) {
- mSoftc->msk_rxqstart[i] = next;
- mSoftc->msk_rxqend[i] = next + mSoftc->msk_rxqsize - 1;
- next = mSoftc->msk_rxqend[i] + 1;
- mSoftc->msk_txqstart[i] = next;
- mSoftc->msk_txqend[i] = next + mSoftc->msk_txqsize - 1;
- next = mSoftc->msk_txqend[i] + 1;
+ sc->msk_rxqsize = (((sc->msk_ramsize * 1024 * 2) / 3) / 1024) * 1024;
+ sc->msk_txqsize = (sc->msk_ramsize * 1024) - sc->msk_rxqsize;
+ for (i = 0, next = 0; i < sc->msk_num_port; i++) {
+ sc->msk_rxqstart[i] = next;
+ sc->msk_rxqend[i] = next + sc->msk_rxqsize - 1;
+ next = sc->msk_rxqend[i] + 1;
+ sc->msk_txqstart[i] = next;
+ sc->msk_txqend[i] = next + sc->msk_txqsize - 1;
+ next = sc->msk_txqend[i] + 1;
DEBUG ((EFI_D_NET, "Marvell Yukon: Port %d : Rx Queue %dKB(0x%08x:0x%08x)\n", i,
- mSoftc->msk_rxqsize / 1024, mSoftc->msk_rxqstart[i], mSoftc->msk_rxqend[i]));
+ sc->msk_rxqsize / 1024, sc->msk_rxqstart[i], sc->msk_rxqend[i]));
DEBUG ((EFI_D_NET, "Marvell Yukon: Port %d : Tx Queue %dKB(0x%08x:0x%08x)\n", i,
- mSoftc->msk_txqsize / 1024, mSoftc->msk_txqstart[i], mSoftc->msk_txqend[i]));
+ sc->msk_txqsize / 1024, sc->msk_txqstart[i], sc->msk_txqend[i]));
}
}
@@ -811,15 +834,18 @@ msk_phy_power (
static
VOID
clear_pci_errors (
- VOID
+ struct msk_softc *sc
)
{
EFI_STATUS Status;
UINT16 val;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+
+ PciIo = sc->PciIo;
// Clear all error bits in the PCI status register.
- Status = mPciIo->Pci.Read (
- mPciIo,
+ Status = PciIo->Pci.Read (
+ PciIo,
EfiPciIoWidthUint16,
PCI_PRIMARY_STATUS_OFFSET,
1,
@@ -828,11 +854,11 @@ clear_pci_errors (
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "Marvell Yukon: Warning - Reading PCI Status failed: %r", Status));
}
- CSR_WRITE_1 (mSoftc, B2_TST_CTRL1, TST_CFG_WRITE_ON);
+ CSR_WRITE_1 (sc, B2_TST_CTRL1, TST_CFG_WRITE_ON);
val |= PCIM_STATUS_PERR | PCIM_STATUS_SERR | PCIM_STATUS_RMABORT |
PCIM_STATUS_RTABORT | PCIM_STATUS_PERRREPORT;
- Status = mPciIo->Pci.Write (
- mPciIo,
+ Status = PciIo->Pci.Write (
+ PciIo,
EfiPciIoWidthUint16,
PCI_PRIMARY_STATUS_OFFSET,
1,
@@ -841,13 +867,13 @@ clear_pci_errors (
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "Marvell Yukon: Warning - Writing PCI Status failed: %r", Status));
}
- CSR_WRITE_2 (mSoftc, B0_CTST, CS_MRST_CLR);
+ CSR_WRITE_2 (sc, B0_CTST, CS_MRST_CLR);
}
static
VOID
mskc_reset (
- VOID
+ struct msk_softc *sc
)
{
EFI_STATUS Status;
@@ -855,44 +881,47 @@ mskc_reset (
UINT16 status;
UINT32 val;
INTN i;
+ EFI_PCI_IO_PROTOCOL *PciIo;
- CSR_WRITE_2 (mSoftc, B0_CTST, CS_RST_CLR);
+ PciIo = sc->PciIo;
+
+ CSR_WRITE_2 (sc, B0_CTST, CS_RST_CLR);
// Disable ASF
- if (mSoftc->msk_hw_id == CHIP_ID_YUKON_EX) {
- status = CSR_READ_2 (mSoftc, B28_Y2_ASF_HCU_CCSR);
+ if (sc->msk_hw_id == CHIP_ID_YUKON_EX) {
+ status = CSR_READ_2 (sc, B28_Y2_ASF_HCU_CCSR);
// Clear AHB bridge & microcontroller reset
status &= ~(Y2_ASF_HCU_CCSR_AHB_RST | Y2_ASF_HCU_CCSR_CPU_RST_MODE);
// Clear ASF microcontroller state
status &= ~ Y2_ASF_HCU_CCSR_UC_STATE_MSK;
- CSR_WRITE_2 (mSoftc, B28_Y2_ASF_HCU_CCSR, status);
+ CSR_WRITE_2 (sc, B28_Y2_ASF_HCU_CCSR, status);
} else {
- CSR_WRITE_1 (mSoftc, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET);
+ CSR_WRITE_1 (sc, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET);
}
- CSR_WRITE_2 (mSoftc, B0_CTST, Y2_ASF_DISABLE);
+ CSR_WRITE_2 (sc, B0_CTST, Y2_ASF_DISABLE);
//
// Since we disabled ASF, S/W reset is required for Power Management.
//
- CSR_WRITE_2 (mSoftc, B0_CTST, CS_RST_SET);
- CSR_WRITE_2 (mSoftc, B0_CTST, CS_RST_CLR);
+ CSR_WRITE_2 (sc, B0_CTST, CS_RST_SET);
+ CSR_WRITE_2 (sc, B0_CTST, CS_RST_CLR);
- clear_pci_errors ();
- switch (mSoftc->msk_bustype) {
+ clear_pci_errors (sc);
+ switch (sc->msk_bustype) {
case MSK_PEX_BUS:
// Clear all PEX errors
- CSR_PCI_WRITE_4 (mSoftc, PEX_UNC_ERR_STAT, 0xffffffff);
- val = CSR_PCI_READ_4 (mSoftc, PEX_UNC_ERR_STAT);
+ CSR_PCI_WRITE_4 (sc, PEX_UNC_ERR_STAT, 0xffffffff);
+ val = CSR_PCI_READ_4 (sc, PEX_UNC_ERR_STAT);
if ((val & PEX_RX_OV) != 0) {
- mSoftc->msk_intrmask &= ~Y2_IS_HW_ERR;
- mSoftc->msk_intrhwemask &= ~Y2_IS_PCI_EXP;
+ sc->msk_intrmask &= ~Y2_IS_HW_ERR;
+ sc->msk_intrhwemask &= ~Y2_IS_PCI_EXP;
}
break;
case MSK_PCI_BUS:
case MSK_PCIX_BUS:
// Set Cache Line Size to 2 (8bytes) if configured to 0
- Status = mPciIo->Pci.Read (
- mPciIo,
+ Status = PciIo->Pci.Read (
+ PciIo,
EfiPciIoWidthUint8,
PCI_CACHELINE_SIZE_OFFSET,
1,
@@ -903,8 +932,8 @@ mskc_reset (
}
if (val == 0) {
val = 2;
- Status = mPciIo->Pci.Write (
- mPciIo,
+ Status = PciIo->Pci.Write (
+ PciIo,
EfiPciIoWidthUint8,
PCI_CACHELINE_SIZE_OFFSET,
1,
@@ -914,9 +943,9 @@ mskc_reset (
DEBUG ((EFI_D_ERROR, "Marvell Yukon: Warning - Writing PCI cache line size failed: %r", Status));
}
}
- if (mSoftc->msk_bustype == MSK_PCIX_BUS) {
- Status = mPciIo->Pci.Read (
- mPciIo,
+ if (sc->msk_bustype == MSK_PCIX_BUS) {
+ Status = PciIo->Pci.Read (
+ PciIo,
EfiPciIoWidthUint32,
PCI_OUR_REG_1,
1,
@@ -926,8 +955,8 @@ mskc_reset (
DEBUG ((EFI_D_ERROR, "Marvell Yukon: Warning - Reading Our Reg 1 failed: %r", Status));
}
val |= PCI_CLS_OPT;
- Status = mPciIo->Pci.Write (
- mPciIo,
+ Status = PciIo->Pci.Write (
+ PciIo,
EfiPciIoWidthUint32,
PCI_OUR_REG_1,
1,
@@ -941,130 +970,128 @@ mskc_reset (
}
// Set PHY power state
- msk_phy_power (mSoftc, MSK_PHY_POWERUP);
+ msk_phy_power (sc, MSK_PHY_POWERUP);
// Reset GPHY/GMAC Control
- for (i = 0; i < mSoftc->msk_num_port; i++) {
+ for (i = 0; i < sc->msk_num_port; i++) {
// GPHY Control reset
- CSR_WRITE_4 (mSoftc, MR_ADDR (i, GPHY_CTRL), GPC_RST_SET);
- CSR_WRITE_4 (mSoftc, MR_ADDR (i, GPHY_CTRL), GPC_RST_CLR);
- if (mSoftc->msk_hw_id == CHIP_ID_YUKON_UL_2) {
+ CSR_WRITE_4 (sc, MR_ADDR (i, GPHY_CTRL), GPC_RST_SET);
+ CSR_WRITE_4 (sc, MR_ADDR (i, GPHY_CTRL), GPC_RST_CLR);
+ if (sc->msk_hw_id == CHIP_ID_YUKON_UL_2) {
// Magic value observed under Linux.
- CSR_WRITE_4 (mSoftc, MR_ADDR (i, GPHY_CTRL), 0x00105226);
+ CSR_WRITE_4 (sc, MR_ADDR (i, GPHY_CTRL), 0x00105226);
}
// GMAC Control reset
- CSR_WRITE_4 (mSoftc, MR_ADDR (i, GMAC_CTRL), GMC_RST_SET);
- CSR_WRITE_4 (mSoftc, MR_ADDR (i, GMAC_CTRL), GMC_RST_CLR);
- CSR_WRITE_4 (mSoftc, MR_ADDR (i, GMAC_CTRL), GMC_F_LOOPB_OFF);
- if (mSoftc->msk_hw_id == CHIP_ID_YUKON_EX) {
- CSR_WRITE_4 (mSoftc, MR_ADDR (i, GMAC_CTRL), GMC_BYP_MACSECRX_ON | GMC_BYP_MACSECTX_ON | GMC_BYP_RETR_ON);
+ CSR_WRITE_4 (sc, MR_ADDR (i, GMAC_CTRL), GMC_RST_SET);
+ CSR_WRITE_4 (sc, MR_ADDR (i, GMAC_CTRL), GMC_RST_CLR);
+ CSR_WRITE_4 (sc, MR_ADDR (i, GMAC_CTRL), GMC_F_LOOPB_OFF);
+ if (sc->msk_hw_id == CHIP_ID_YUKON_EX) {
+ CSR_WRITE_4 (sc, MR_ADDR (i, GMAC_CTRL), GMC_BYP_MACSECRX_ON | GMC_BYP_MACSECTX_ON | GMC_BYP_RETR_ON);
}
}
- if ((mSoftc->msk_hw_id == CHIP_ID_YUKON_OPT) && (mSoftc->msk_hw_rev == 0)) {
+ if ((sc->msk_hw_id == CHIP_ID_YUKON_OPT) && (sc->msk_hw_rev == 0)) {
// Disable PCIe PHY powerdown (reg 0x80, bit7)
- CSR_WRITE_4 (mSoftc, Y2_PEX_PHY_DATA, (0x0080 << 16) | 0x0080);
+ CSR_WRITE_4 (sc, Y2_PEX_PHY_DATA, (0x0080 << 16) | 0x0080);
}
- CSR_WRITE_1 (mSoftc, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
+ CSR_WRITE_1 (sc, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
// LED On
- CSR_WRITE_2 (mSoftc, B0_CTST, Y2_LED_STAT_ON);
+ CSR_WRITE_2 (sc, B0_CTST, Y2_LED_STAT_ON);
// Enable plug in go
- CSR_WRITE_2 (mSoftc, B0_CTST, Y_ULTRA_2_PLUG_IN_GO_EN);
+ CSR_WRITE_2 (sc, B0_CTST, Y_ULTRA_2_PLUG_IN_GO_EN);
// Clear TWSI IRQ
- CSR_WRITE_4 (mSoftc, B2_I2C_IRQ, I2C_CLR_IRQ);
+ CSR_WRITE_4 (sc, B2_I2C_IRQ, I2C_CLR_IRQ);
// Turn off hardware timer
- CSR_WRITE_1 (mSoftc, B2_TI_CTRL, TIM_STOP);
- CSR_WRITE_1 (mSoftc, B2_TI_CTRL, TIM_CLR_IRQ);
+ CSR_WRITE_1 (sc, B2_TI_CTRL, TIM_STOP);
+ CSR_WRITE_1 (sc, B2_TI_CTRL, TIM_CLR_IRQ);
// Turn off descriptor polling
- CSR_WRITE_1 (mSoftc, B28_DPT_CTRL, DPT_STOP);
+ CSR_WRITE_1 (sc, B28_DPT_CTRL, DPT_STOP);
// Turn off time stamps
- CSR_WRITE_1 (mSoftc, GMAC_TI_ST_CTRL, GMT_ST_STOP);
- CSR_WRITE_1 (mSoftc, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ);
+ CSR_WRITE_1 (sc, GMAC_TI_ST_CTRL, GMT_ST_STOP);
+ CSR_WRITE_1 (sc, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ);
// Configure timeout values
- for (i = 0; i < mSoftc->msk_num_port; i++) {
- CSR_WRITE_2 (mSoftc, SELECT_RAM_BUFFER (i, B3_RI_CTRL), RI_RST_SET);
- CSR_WRITE_2 (mSoftc, SELECT_RAM_BUFFER (i, B3_RI_CTRL), RI_RST_CLR);
- CSR_WRITE_1 (mSoftc, SELECT_RAM_BUFFER (i, B3_RI_WTO_R1), MSK_RI_TO_53);
- CSR_WRITE_1 (mSoftc, SELECT_RAM_BUFFER (i, B3_RI_WTO_XA1), MSK_RI_TO_53);
- CSR_WRITE_1 (mSoftc, SELECT_RAM_BUFFER (i, B3_RI_WTO_XS1), MSK_RI_TO_53);
- CSR_WRITE_1 (mSoftc, SELECT_RAM_BUFFER (i, B3_RI_RTO_R1), MSK_RI_TO_53);
- CSR_WRITE_1 (mSoftc, SELECT_RAM_BUFFER (i, B3_RI_RTO_XA1), MSK_RI_TO_53);
- CSR_WRITE_1 (mSoftc, SELECT_RAM_BUFFER (i, B3_RI_RTO_XS1), MSK_RI_TO_53);
- CSR_WRITE_1 (mSoftc, SELECT_RAM_BUFFER (i, B3_RI_WTO_R2), MSK_RI_TO_53);
- CSR_WRITE_1 (mSoftc, SELECT_RAM_BUFFER (i, B3_RI_WTO_XA2), MSK_RI_TO_53);
- CSR_WRITE_1 (mSoftc, SELECT_RAM_BUFFER (i, B3_RI_WTO_XS2), MSK_RI_TO_53);
- CSR_WRITE_1 (mSoftc, SELECT_RAM_BUFFER (i, B3_RI_RTO_R2), MSK_RI_TO_53);
- CSR_WRITE_1 (mSoftc, SELECT_RAM_BUFFER (i, B3_RI_RTO_XA2), MSK_RI_TO_53);
- CSR_WRITE_1 (mSoftc, SELECT_RAM_BUFFER (i, B3_RI_RTO_XS2), MSK_RI_TO_53);
+ for (i = 0; i < sc->msk_num_port; i++) {
+ CSR_WRITE_2 (sc, SELECT_RAM_BUFFER (i, B3_RI_CTRL), RI_RST_SET);
+ CSR_WRITE_2 (sc, SELECT_RAM_BUFFER (i, B3_RI_CTRL), RI_RST_CLR);
+ CSR_WRITE_1 (sc, SELECT_RAM_BUFFER (i, B3_RI_WTO_R1), MSK_RI_TO_53);
+ CSR_WRITE_1 (sc, SELECT_RAM_BUFFER (i, B3_RI_WTO_XA1), MSK_RI_TO_53);
+ CSR_WRITE_1 (sc, SELECT_RAM_BUFFER (i, B3_RI_WTO_XS1), MSK_RI_TO_53);
+ CSR_WRITE_1 (sc, SELECT_RAM_BUFFER (i, B3_RI_RTO_R1), MSK_RI_TO_53);
+ CSR_WRITE_1 (sc, SELECT_RAM_BUFFER (i, B3_RI_RTO_XA1), MSK_RI_TO_53);
+ CSR_WRITE_1 (sc, SELECT_RAM_BUFFER (i, B3_RI_RTO_XS1), MSK_RI_TO_53);
+ CSR_WRITE_1 (sc, SELECT_RAM_BUFFER (i, B3_RI_WTO_R2), MSK_RI_TO_53);
+ CSR_WRITE_1 (sc, SELECT_RAM_BUFFER (i, B3_RI_WTO_XA2), MSK_RI_TO_53);
+ CSR_WRITE_1 (sc, SELECT_RAM_BUFFER (i, B3_RI_WTO_XS2), MSK_RI_TO_53);
+ CSR_WRITE_1 (sc, SELECT_RAM_BUFFER (i, B3_RI_RTO_R2), MSK_RI_TO_53);
+ CSR_WRITE_1 (sc, SELECT_RAM_BUFFER (i, B3_RI_RTO_XA2), MSK_RI_TO_53);
+ CSR_WRITE_1 (sc, SELECT_RAM_BUFFER (i, B3_RI_RTO_XS2), MSK_RI_TO_53);
}
// Disable all interrupts
- CSR_WRITE_4 (mSoftc, B0_HWE_IMSK, 0);
- CSR_READ_4 (mSoftc, B0_HWE_IMSK);
- CSR_WRITE_4 (mSoftc, B0_IMSK, 0);
- CSR_READ_4 (mSoftc, B0_IMSK);
+ CSR_WRITE_4 (sc, B0_HWE_IMSK, 0);
+ CSR_READ_4 (sc, B0_HWE_IMSK);
+ CSR_WRITE_4 (sc, B0_IMSK, 0);
+ CSR_READ_4 (sc, B0_IMSK);
// Clear status list
- gBS->SetMem (mSoftc->msk_stat_ring, sizeof (struct msk_stat_desc) * MSK_STAT_RING_CNT, 0);
- mSoftc->msk_stat_cons = 0;
- CSR_WRITE_4 (mSoftc, STAT_CTRL, SC_STAT_RST_SET);
- CSR_WRITE_4 (mSoftc, STAT_CTRL, SC_STAT_RST_CLR);
+ gBS->SetMem (sc->msk_stat_ring, sizeof (struct msk_stat_desc) * MSK_STAT_RING_CNT, 0);
+ sc->msk_stat_cons = 0;
+ CSR_WRITE_4 (sc, STAT_CTRL, SC_STAT_RST_SET);
+ CSR_WRITE_4 (sc, STAT_CTRL, SC_STAT_RST_CLR);
// Set the status list base address
- PhysAddr = mSoftc->msk_stat_ring_paddr;
- CSR_WRITE_4 (mSoftc, STAT_LIST_ADDR_LO, MSK_ADDR_LO (PhysAddr));
- CSR_WRITE_4 (mSoftc, STAT_LIST_ADDR_HI, MSK_ADDR_HI (PhysAddr));
+ PhysAddr = sc->msk_stat_ring_paddr;
+ CSR_WRITE_4 (sc, STAT_LIST_ADDR_LO, MSK_ADDR_LO (PhysAddr));
+ CSR_WRITE_4 (sc, STAT_LIST_ADDR_HI, MSK_ADDR_HI (PhysAddr));
// Set the status list last index
- CSR_WRITE_2 (mSoftc, STAT_LAST_IDX, MSK_STAT_RING_CNT - 1);
- if ((mSoftc->msk_hw_id == CHIP_ID_YUKON_EC) && (mSoftc->msk_hw_rev == CHIP_REV_YU_EC_A1)) {
+ CSR_WRITE_2 (sc, STAT_LAST_IDX, MSK_STAT_RING_CNT - 1);
+ if ((sc->msk_hw_id == CHIP_ID_YUKON_EC) && (sc->msk_hw_rev == CHIP_REV_YU_EC_A1)) {
// WA for dev. #4.3
- CSR_WRITE_2 (mSoftc, STAT_TX_IDX_TH, ST_TXTH_IDX_MASK);
+ CSR_WRITE_2 (sc, STAT_TX_IDX_TH, ST_TXTH_IDX_MASK);
// WA for dev. #4.18
- CSR_WRITE_1 (mSoftc, STAT_FIFO_WM, 0x21);
- CSR_WRITE_1 (mSoftc, STAT_FIFO_ISR_WM, 0x07);
+ CSR_WRITE_1 (sc, STAT_FIFO_WM, 0x21);
+ CSR_WRITE_1 (sc, STAT_FIFO_ISR_WM, 0x07);
} else {
- CSR_WRITE_2 (mSoftc, STAT_TX_IDX_TH, 0x0a);
- CSR_WRITE_1 (mSoftc, STAT_FIFO_WM, 0x10);
- if ((mSoftc->msk_hw_id == CHIP_ID_YUKON_XL) && (mSoftc->msk_hw_rev == CHIP_REV_YU_XL_A0)) {
- CSR_WRITE_1 (mSoftc, STAT_FIFO_ISR_WM, 0x04);
+ CSR_WRITE_2 (sc, STAT_TX_IDX_TH, 0x0a);
+ CSR_WRITE_1 (sc, STAT_FIFO_WM, 0x10);
+ if ((sc->msk_hw_id == CHIP_ID_YUKON_XL) && (sc->msk_hw_rev == CHIP_REV_YU_XL_A0)) {
+ CSR_WRITE_1 (sc, STAT_FIFO_ISR_WM, 0x04);
} else {
- CSR_WRITE_1 (mSoftc, STAT_FIFO_ISR_WM, 0x10);
+ CSR_WRITE_1 (sc, STAT_FIFO_ISR_WM, 0x10);
}
- CSR_WRITE_4 (mSoftc, STAT_ISR_TIMER_INI, 0x0190);
+ CSR_WRITE_4 (sc, STAT_ISR_TIMER_INI, 0x0190);
}
//
// Use default value for STAT_ISR_TIMER_INI, STAT_LEV_TIMER_INI.
//
- CSR_WRITE_4 (mSoftc, STAT_TX_TIMER_INI, MSK_USECS (mSoftc, 1000));
+ CSR_WRITE_4 (sc, STAT_TX_TIMER_INI, MSK_USECS (sc, 1000));
// Enable status unit
- CSR_WRITE_4 (mSoftc, STAT_CTRL, SC_STAT_OP_ON);
+ CSR_WRITE_4 (sc, STAT_CTRL, SC_STAT_OP_ON);
- CSR_WRITE_1 (mSoftc, STAT_TX_TIMER_CTRL, TIM_START);
- CSR_WRITE_1 (mSoftc, STAT_LEV_TIMER_CTRL, TIM_START);
- CSR_WRITE_1 (mSoftc, STAT_ISR_TIMER_CTRL, TIM_START);
+ CSR_WRITE_1 (sc, STAT_TX_TIMER_CTRL, TIM_START);
+ CSR_WRITE_1 (sc, STAT_LEV_TIMER_CTRL, TIM_START);
+ CSR_WRITE_1 (sc, STAT_ISR_TIMER_CTRL, TIM_START);
}
-static
EFI_STATUS
-msk_attach (
- INT32 Port
+mskc_attach_if (
+ struct msk_if_softc *sc_if,
+ UINTN Port
)
{
- struct msk_if_softc *sc_if;
INTN i;
EFI_STATUS Status;
- sc_if = mSoftc->msk_if[Port];
sc_if->msk_md.port = Port;
- sc_if->msk_flags = mSoftc->msk_pflags;
+ sc_if->msk_flags = sc_if->msk_softc->msk_pflags;
// Setup Tx/Rx queue register offsets
if (Port == MSK_PORT_A) {
@@ -1092,19 +1119,22 @@ msk_attach (
* use this extra address.
*/
for (i = 0; i < NET_ETHER_ADDR_LEN; i++) {
- sc_if->MacAddress.Addr[i] = CSR_READ_1 (mSoftc, B2_MAC_1 + (Port * 8) + i);
+ sc_if->MacAddress.Addr[i] = CSR_READ_1 (sc_if->msk_softc, B2_MAC_1 + (Port * 8) + i);
}
DEBUG ((EFI_D_NET,"Marvell Yukon: Mac Address %02x:%02x:%02x:%02x:%02x:%02x\n",
sc_if->MacAddress.Addr[0], sc_if->MacAddress.Addr[1], sc_if->MacAddress.Addr[2],
sc_if->MacAddress.Addr[3], sc_if->MacAddress.Addr[4], sc_if->MacAddress.Addr[5]));
- Status = e1000_probe_and_attach (&sc_if->mii_d, &sc_if->msk_md);
+ Status = e1000_probe_and_attach (&sc_if->mii_d, &sc_if->msk_md, sc_if, &sc_if->phy_softc);
if (EFI_ERROR (Status)) {
- mSoftc->msk_if[Port] = NULL;
- msk_detach (Port);
+ return Status;
}
+ InitializeListHead (&sc_if->TransmitQueueHead);
+ InitializeListHead (&sc_if->TransmitFreeQueueHead);
+ InitializeListHead (&sc_if->ReceiveQueueHead);
+
return (Status);
}
@@ -1115,7 +1145,7 @@ msk_attach (
EFI_STATUS
mskc_attach (
IN EFI_PCI_IO_PROTOCOL *PciIo,
- OUT EFI_MAC_ADDRESS *Mac
+ OUT struct msk_softc **ScData
)
{
struct msk_mii_data *mmd;
@@ -1123,11 +1153,11 @@ mskc_attach (
UINT8 *PciBarResources;
EFI_STATUS Status;
struct msk_if_softc *ScIf;
+ struct msk_softc *sc;
- mPciIo = PciIo;
Status = gBS->AllocatePool (EfiBootServicesData,
sizeof (struct msk_softc),
- (VOID**) &mSoftc);
+ (VOID**) &sc);
if (EFI_ERROR (Status)) {
return Status;
}
@@ -1135,28 +1165,29 @@ mskc_attach (
//
// Save original PCI attributes
//
- gBS->SetMem (mSoftc, sizeof (struct msk_softc), 0);
- Status = mPciIo->Attributes (
- mPciIo,
+ gBS->SetMem (sc, sizeof (struct msk_softc), 0);
+ sc->PciIo = PciIo;
+ Status = PciIo->Attributes (
+ PciIo,
EfiPciIoAttributeOperationGet,
0,
- &mSoftc->OriginalPciAttributes
+ &sc->OriginalPciAttributes
);
if (EFI_ERROR (Status)) {
- gBS->FreePool (mSoftc);
+ gBS->FreePool (sc);
return Status;
}
- Status = mPciIo->Attributes (
- mPciIo,
+ Status = PciIo->Attributes (
+ PciIo,
EfiPciIoAttributeOperationSupported,
0,
&Supports
);
if (!EFI_ERROR (Status)) {
Supports &= EFI_PCI_DEVICE_ENABLE;
- Status = mPciIo->Attributes (
- mPciIo,
+ Status = PciIo->Attributes (
+ PciIo,
EfiPciIoAttributeOperationEnable,
Supports | EFI_PCI_IO_ATTRIBUTE_DUAL_ADDRESS_CYCLE,
NULL
@@ -1167,13 +1198,13 @@ mskc_attach (
goto RESTORE_PCI_ATTRIBS;
}
- Status = mPciIo->GetBarAttributes (mPciIo, 0, &Supports, (VOID**)&PciBarResources);
+ Status = PciIo->GetBarAttributes (PciIo, 0, &Supports, (VOID**)&PciBarResources);
if (!EFI_ERROR (Status) && (((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)PciBarResources)->Desc == ACPI_ADDRESS_SPACE_DESCRIPTOR)) {
if (((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)PciBarResources)->ResType == ACPI_ADDRESS_SPACE_TYPE_MEM) {
if (!(((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)PciBarResources)->SpecificFlag & ACPI_SPECFLAG_PREFETCHABLE)) {
- mSoftc->RegBase = ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)PciBarResources)->AddrRangeMin;
+ sc->RegBase = ((EFI_ACPI_ADDRESS_SPACE_DESCRIPTOR *)PciBarResources)->AddrRangeMin;
// Should assert that Bar is 32 bits wide
- DEBUG ((EFI_D_NET, "Marvell Yukon: GlobalRegistersBase = 0x%x\n", mSoftc->RegBase));
+ DEBUG ((EFI_D_NET, "Marvell Yukon: GlobalRegistersBase = 0x%x\n", sc->RegBase));
} else {
Status = EFI_NOT_FOUND;
}
@@ -1186,85 +1217,85 @@ mskc_attach (
}
// Clear Software Reset
- CSR_WRITE_2 (mSoftc, B0_CTST, CS_RST_CLR);
+ CSR_WRITE_2 (sc, B0_CTST, CS_RST_CLR);
// Get Hardware ID & Revision
- mSoftc->msk_hw_id = CSR_READ_1 (mSoftc, B2_CHIP_ID);
- mSoftc->msk_hw_rev = (CSR_READ_1 (mSoftc, B2_MAC_CFG) >> 4) & 0x0f;
+ sc->msk_hw_id = CSR_READ_1 (sc, B2_CHIP_ID);
+ sc->msk_hw_rev = (CSR_READ_1 (sc, B2_MAC_CFG) >> 4) & 0x0f;
// Bail out if chip is not recognized
- if (mSoftc->msk_hw_id < CHIP_ID_YUKON_XL ||
- mSoftc->msk_hw_id > CHIP_ID_YUKON_OPT ||
- mSoftc->msk_hw_id == CHIP_ID_YUKON_SUPR ||
- mSoftc->msk_hw_id == CHIP_ID_YUKON_UNKNOWN) {
- DEBUG ((EFI_D_NET, "Marvell Yukon: unknown device: id=0x%02x, rev=0x%02x\n", mSoftc->msk_hw_id, mSoftc->msk_hw_rev));
+ if (sc->msk_hw_id < CHIP_ID_YUKON_XL ||
+ sc->msk_hw_id > CHIP_ID_YUKON_OPT ||
+ sc->msk_hw_id == CHIP_ID_YUKON_SUPR ||
+ sc->msk_hw_id == CHIP_ID_YUKON_UNKNOWN) {
+ DEBUG ((EFI_D_NET, "Marvell Yukon: unknown device: id=0x%02x, rev=0x%02x\n", sc->msk_hw_id, sc->msk_hw_rev));
Status = EFI_DEVICE_ERROR;
goto RESTORE_PCI_ATTRIBS;
}
DEBUG ((EFI_D_NET, "Marvell Yukon: Marvell Technology Group Ltd. %a Id:0x%02x Rev:0x%02x\n",
- model_name[mSoftc->msk_hw_id - CHIP_ID_YUKON_XL], mSoftc->msk_hw_id, mSoftc->msk_hw_rev));
+ model_name[sc->msk_hw_id - CHIP_ID_YUKON_XL], sc->msk_hw_id, sc->msk_hw_rev));
- mSoftc->msk_process_limit = MSK_PROC_DEFAULT;
- mSoftc->msk_int_holdoff = MSK_INT_HOLDOFF_DEFAULT;
+ sc->msk_process_limit = MSK_PROC_DEFAULT;
+ sc->msk_int_holdoff = MSK_INT_HOLDOFF_DEFAULT;
// Check if MAC address is valid
- if ((CSR_READ_4 (mSoftc, B2_MAC_1) == 0) && (CSR_READ_4 (mSoftc, B2_MAC_1+4) == 0)) {
+ if ((CSR_READ_4 (sc, B2_MAC_1) == 0) && (CSR_READ_4 (sc, B2_MAC_1+4) == 0)) {
DEBUG ((EFI_D_NET, "Marvell Yukon: MAC address is invalid (00:00:00:00:00:00)\n"));
}
// Soft reset
- CSR_WRITE_2 (mSoftc, B0_CTST, CS_RST_SET);
- CSR_WRITE_2 (mSoftc, B0_CTST, CS_RST_CLR);
- mSoftc->msk_pmd = CSR_READ_1 (mSoftc, B2_PMD_TYP);
+ CSR_WRITE_2 (sc, B0_CTST, CS_RST_SET);
+ CSR_WRITE_2 (sc, B0_CTST, CS_RST_CLR);
+ sc->msk_pmd = CSR_READ_1 (sc, B2_PMD_TYP);
// Check number of MACs
- mSoftc->msk_num_port = 1;
- if ((CSR_READ_1 (mSoftc, B2_Y2_HW_RES) & CFG_DUAL_MAC_MSK) == CFG_DUAL_MAC_MSK) {
- if (!(CSR_READ_1 (mSoftc, B2_Y2_CLK_GATE) & Y2_STATUS_LNK2_INAC)) {
- mSoftc->msk_num_port++;
+ sc->msk_num_port = 1;
+ if ((CSR_READ_1 (sc, B2_Y2_HW_RES) & CFG_DUAL_MAC_MSK) == CFG_DUAL_MAC_MSK) {
+ if (!(CSR_READ_1 (sc, B2_Y2_CLK_GATE) & Y2_STATUS_LNK2_INAC)) {
+ sc->msk_num_port++;
}
}
/* Check bus type. */
- mSoftc->msk_bustype = MSK_PEX_BUS; /* Only support PCI Express */
- mSoftc->msk_expcap = 1;
+ sc->msk_bustype = MSK_PEX_BUS; /* Only support PCI Express */
+ sc->msk_expcap = 1;
- switch (mSoftc->msk_hw_id) {
+ switch (sc->msk_hw_id) {
case CHIP_ID_YUKON_EC:
- mSoftc->msk_clock = 125; /* 125 MHz */
- mSoftc->msk_pflags |= MSK_FLAG_JUMBO;
+ sc->msk_clock = 125; /* 125 MHz */
+ sc->msk_pflags |= MSK_FLAG_JUMBO;
break;
case CHIP_ID_YUKON_EC_U:
- mSoftc->msk_clock = 125; /* 125 MHz */
- mSoftc->msk_pflags |= MSK_FLAG_JUMBO | MSK_FLAG_JUMBO_NOCSUM;
+ sc->msk_clock = 125; /* 125 MHz */
+ sc->msk_pflags |= MSK_FLAG_JUMBO | MSK_FLAG_JUMBO_NOCSUM;
break;
case CHIP_ID_YUKON_EX:
- mSoftc->msk_clock = 125; /* 125 MHz */
- mSoftc->msk_pflags |= MSK_FLAG_JUMBO | MSK_FLAG_DESCV2 | MSK_FLAG_AUTOTX_CSUM;
+ sc->msk_clock = 125; /* 125 MHz */
+ sc->msk_pflags |= MSK_FLAG_JUMBO | MSK_FLAG_DESCV2 | MSK_FLAG_AUTOTX_CSUM;
/*
* Yukon Extreme seems to have silicon bug for
* automatic Tx checksum calculation capability.
*/
- if (mSoftc->msk_hw_rev == CHIP_REV_YU_EX_B0) {
- mSoftc->msk_pflags &= ~MSK_FLAG_AUTOTX_CSUM;
+ if (sc->msk_hw_rev == CHIP_REV_YU_EX_B0) {
+ sc->msk_pflags &= ~MSK_FLAG_AUTOTX_CSUM;
}
/*
* Yukon Extreme A0 could not use store-and-forward
* for jumbo frames, so disable Tx checksum
* offloading for jumbo frames.
*/
- if (mSoftc->msk_hw_rev == CHIP_REV_YU_EX_A0) {
- mSoftc->msk_pflags |= MSK_FLAG_JUMBO_NOCSUM;
+ if (sc->msk_hw_rev == CHIP_REV_YU_EX_A0) {
+ sc->msk_pflags |= MSK_FLAG_JUMBO_NOCSUM;
}
break;
case CHIP_ID_YUKON_FE:
- mSoftc->msk_clock = 100; /* 100 MHz */
- mSoftc->msk_pflags |= MSK_FLAG_FASTETHER;
+ sc->msk_clock = 100; /* 100 MHz */
+ sc->msk_pflags |= MSK_FLAG_FASTETHER;
break;
case CHIP_ID_YUKON_FE_P:
- mSoftc->msk_clock = 50; /* 50 MHz */
- mSoftc->msk_pflags |= MSK_FLAG_FASTETHER | MSK_FLAG_DESCV2 | MSK_FLAG_AUTOTX_CSUM;
- if (mSoftc->msk_hw_rev == CHIP_REV_YU_FE_P_A0) {
+ sc->msk_clock = 50; /* 50 MHz */
+ sc->msk_pflags |= MSK_FLAG_FASTETHER | MSK_FLAG_DESCV2 | MSK_FLAG_AUTOTX_CSUM;
+ if (sc->msk_hw_rev == CHIP_REV_YU_FE_P_A0) {
/*
* XXX
* FE+ A0 has status LE writeback bug so msk (4)
@@ -1275,39 +1306,39 @@ mskc_attach (
* Just pass received frames to upper stack with
* minimal test and let upper stack handle them.
*/
- mSoftc->msk_pflags |= MSK_FLAG_NOHWVLAN | MSK_FLAG_NORXCHK | MSK_FLAG_NORX_CSUM;
+ sc->msk_pflags |= MSK_FLAG_NOHWVLAN | MSK_FLAG_NORXCHK | MSK_FLAG_NORX_CSUM;
}
break;
case CHIP_ID_YUKON_XL:
- mSoftc->msk_clock = 156; /* 156 MHz */
- mSoftc->msk_pflags |= MSK_FLAG_JUMBO;
+ sc->msk_clock = 156; /* 156 MHz */
+ sc->msk_pflags |= MSK_FLAG_JUMBO;
break;
case CHIP_ID_YUKON_UL_2:
- mSoftc->msk_clock = 125; /* 125 MHz */
- mSoftc->msk_pflags |= MSK_FLAG_JUMBO;
+ sc->msk_clock = 125; /* 125 MHz */
+ sc->msk_pflags |= MSK_FLAG_JUMBO;
break;
case CHIP_ID_YUKON_OPT:
- mSoftc->msk_clock = 125; /* 125 MHz */
- mSoftc->msk_pflags |= MSK_FLAG_JUMBO | MSK_FLAG_DESCV2;
+ sc->msk_clock = 125; /* 125 MHz */
+ sc->msk_pflags |= MSK_FLAG_JUMBO | MSK_FLAG_DESCV2;
break;
default:
- mSoftc->msk_clock = 156; /* 156 MHz */
+ sc->msk_clock = 156; /* 156 MHz */
break;
}
- Status = msk_status_dma_alloc ();
+ Status = msk_status_dma_alloc (sc);
if (EFI_ERROR (Status)) {
goto fail;
}
// Set base interrupt mask
- mSoftc->msk_intrmask = Y2_IS_HW_ERR | Y2_IS_STAT_BMU;
- mSoftc->msk_intrhwemask = Y2_IS_TIST_OV | Y2_IS_MST_ERR | Y2_IS_IRQ_STAT | Y2_IS_PCI_EXP | Y2_IS_PCI_NEXP;
+ sc->msk_intrmask = Y2_IS_HW_ERR | Y2_IS_STAT_BMU;
+ sc->msk_intrhwemask = Y2_IS_TIST_OV | Y2_IS_MST_ERR | Y2_IS_IRQ_STAT | Y2_IS_PCI_EXP | Y2_IS_PCI_NEXP;
// Reset the adapter
- mskc_reset ();
+ mskc_reset (sc);
- mskc_setup_rambuffer ();
+ mskc_setup_rambuffer (sc);
Status = gBS->AllocatePool (EfiBootServicesData,
sizeof (struct msk_if_softc),
@@ -1316,24 +1347,21 @@ mskc_attach (
goto fail;
}
gBS->SetMem (ScIf, sizeof (struct msk_if_softc), 0);
- mSoftc->msk_if[MSK_PORT_A] = ScIf;
- Status = msk_attach (MSK_PORT_A);
+ ScIf->msk_softc = sc;
+ sc->msk_if[MSK_PORT_A] = ScIf;
+ Status = mskc_attach_if (sc->msk_if[MSK_PORT_A], MSK_PORT_A);
if (EFI_ERROR (Status)) {
goto fail;
}
- if (Mac != NULL) {
- gBS->CopyMem (Mac, &ScIf->MacAddress, sizeof (EFI_MAC_ADDRESS));
- }
-
mmd = &ScIf->msk_md;
mmd->port = MSK_PORT_A;
- mmd->pmd = mSoftc->msk_pmd;
- if (mSoftc->msk_pmd == 'L' || mSoftc->msk_pmd == 'S' || mSoftc->msk_pmd == 'P') {
+ mmd->pmd = sc->msk_pmd;
+ if (sc->msk_pmd == 'L' || sc->msk_pmd == 'S' || sc->msk_pmd == 'P') {
mmd->mii_flags |= MIIF_HAVEFIBER;
}
- if (mSoftc->msk_num_port > 1) {
+ if (sc->msk_num_port > 1) {
Status = gBS->AllocatePool (EfiBootServicesData,
sizeof (struct msk_if_softc),
(VOID**) &ScIf);
@@ -1341,39 +1369,44 @@ mskc_attach (
goto fail;
}
gBS->SetMem (ScIf, sizeof (struct msk_if_softc), 0);
- mSoftc->msk_if[MSK_PORT_B] = ScIf;
- Status = msk_attach (MSK_PORT_B);
+ ScIf->msk_softc = sc;
+ sc->msk_if[MSK_PORT_B] = ScIf;
+ Status = mskc_attach_if (sc->msk_if[MSK_PORT_B], MSK_PORT_B);
if (EFI_ERROR (Status)) {
goto fail;
}
mmd = &ScIf->msk_md;
mmd->port = MSK_PORT_B;
- mmd->pmd = mSoftc->msk_pmd;
- if (mSoftc->msk_pmd == 'L' || mSoftc->msk_pmd == 'S' || mSoftc->msk_pmd == 'P') {
+ mmd->pmd = sc->msk_pmd;
+ if (sc->msk_pmd == 'L' || sc->msk_pmd == 'S' || sc->msk_pmd == 'P') {
mmd->mii_flags |= MIIF_HAVEFIBER;
}
}
+ // Return new msk_softc structure
+ *ScData = sc;
+
// Create timer for tick
Status = gBS->CreateEvent (
EVT_NOTIFY_SIGNAL | EVT_TIMER,
TPL_CALLBACK,
mskc_tick,
- mSoftc,
- &mSoftc->Timer
+ (VOID *)sc,
+ &sc->Timer
);
if (EFI_ERROR (Status)) {
goto fail;
}
- InitializeListHead (&mSoftc->TransmitQueueHead);
- InitializeListHead (&mSoftc->TransmitFreeQueueHead);
- InitializeListHead (&mSoftc->ReceiveQueueHead);
+ Status = gBS->SetTimer (sc->Timer, TimerPeriodic, TICKS_PER_SECOND);
+ if (EFI_ERROR (Status)) {
+ goto fail;
+ }
fail:
if (EFI_ERROR (Status)) {
- mskc_detach ();
+ mskc_detach (sc);
}
return (Status);
@@ -1382,13 +1415,13 @@ RESTORE_PCI_ATTRIBS:
//
// Restore original PCI attributes
//
- mPciIo->Attributes (
- mPciIo,
+PciIo->Attributes (
+ PciIo,
EfiPciIoAttributeOperationSet,
- mSoftc->OriginalPciAttributes,
+ sc->OriginalPciAttributes,
NULL
);
- gBS->FreePool (mSoftc);
+ gBS->FreePool (sc);
return Status;
}
@@ -1399,73 +1432,69 @@ RESTORE_PCI_ATTRIBS:
* to be careful about only freeing resources that have actually been
* allocated.
*/
-static
VOID
-msk_detach (
- INT32 Port
+mskc_detach_if (
+ struct msk_if_softc *sc_if
)
{
- struct msk_if_softc *sc_if;
-
- sc_if = mSoftc->msk_if[Port];
-
- msk_stop (sc_if);
-
+ mskc_stop_if (sc_if);
msk_txrx_dma_free (sc_if);
+ e1000phy_detach (sc_if->phy_softc);
+ sc_if->phy_softc = NULL;
}
VOID
mskc_detach (
- VOID
+ struct msk_softc *sc
)
{
EFI_TPL OldTpl;
+ EFI_PCI_IO_PROTOCOL *PciIo;
OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
- if (mSoftc->msk_if[MSK_PORT_A] != NULL) {
- msk_detach (MSK_PORT_A);
- gBS->FreePool (mSoftc->msk_if[MSK_PORT_A]);
- mSoftc->msk_if[MSK_PORT_A] = NULL;
+ PciIo = sc->PciIo;
+
+ if (sc->msk_if[MSK_PORT_A] != NULL) {
+ mskc_detach_if (sc->msk_if[MSK_PORT_A]);
+ gBS->FreePool (sc->msk_if[MSK_PORT_A]);
+ sc->msk_if[MSK_PORT_A] = NULL;
}
- if (mSoftc->msk_if[MSK_PORT_B] != NULL) {
- msk_detach (MSK_PORT_B);
- gBS->FreePool (mSoftc->msk_if[MSK_PORT_B]);
- mSoftc->msk_if[MSK_PORT_B] = NULL;
+ if (sc->msk_if[MSK_PORT_B] != NULL) {
+ mskc_detach_if (sc->msk_if[MSK_PORT_B]);
+ gBS->FreePool (sc->msk_if[MSK_PORT_B]);
+ sc->msk_if[MSK_PORT_B] = NULL;
}
/* Disable all interrupts. */
- CSR_WRITE_4 (mSoftc, B0_IMSK, 0);
- CSR_READ_4 (mSoftc, B0_IMSK);
- CSR_WRITE_4 (mSoftc, B0_HWE_IMSK, 0);
- CSR_READ_4 (mSoftc, B0_HWE_IMSK);
+ CSR_WRITE_4 (sc, B0_IMSK, 0);
+ CSR_READ_4 (sc, B0_IMSK);
+ CSR_WRITE_4 (sc, B0_HWE_IMSK, 0);
+ CSR_READ_4 (sc, B0_HWE_IMSK);
// LED Off.
- CSR_WRITE_2 (mSoftc, B0_CTST, Y2_LED_STAT_OFF);
+ CSR_WRITE_2 (sc, B0_CTST, Y2_LED_STAT_OFF);
// Put hardware reset.
- CSR_WRITE_2 (mSoftc, B0_CTST, CS_RST_SET);
+ CSR_WRITE_2 (sc, B0_CTST, CS_RST_SET);
- msk_status_dma_free ();
+ msk_status_dma_free (sc);
- if (mSoftc->Timer != NULL) {
- gBS->SetTimer (mSoftc->Timer, TimerCancel, 0);
- gBS->CloseEvent (mSoftc->Timer);
+ if (sc->Timer != NULL) {
+ gBS->SetTimer (sc->Timer, TimerCancel, 0);
+ gBS->CloseEvent (sc->Timer);
- mSoftc->Timer = NULL;
+ sc->Timer = NULL;
}
//
// Restore original PCI attributes
//
- mPciIo->Attributes (
- mPciIo,
+ PciIo->Attributes (
+ PciIo,
EfiPciIoAttributeOperationSet,
- mSoftc->OriginalPciAttributes,
+ sc->OriginalPciAttributes,
NULL
);
- gBS->FreePool (mSoftc);
- mSoftc = NULL;
- mPciIo = NULL;
gBS->RestoreTPL (OldTpl);
}
@@ -1474,24 +1503,27 @@ mskc_detach (
static
EFI_STATUS
msk_status_dma_alloc (
- VOID
+ struct msk_softc *sc
)
{
EFI_STATUS Status;
UINTN Length;
+ EFI_PCI_IO_PROTOCOL *PciIo;
- Status = mPciIo->AllocateBuffer (mPciIo, AllocateAnyPages, EfiBootServicesData,
- EFI_SIZE_TO_PAGES (MSK_STAT_RING_SZ), (VOID**)&mSoftc->msk_stat_ring, 0);
+ PciIo = sc->PciIo;
+
+ Status = PciIo->AllocateBuffer (PciIo, AllocateAnyPages, EfiBootServicesData,
+ EFI_SIZE_TO_PAGES (MSK_STAT_RING_SZ), (VOID**)&sc->msk_stat_ring, 0);
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "Marvell Yukon: failed to allocate DMA'able memory for status ring\n"));
return Status;
}
- ASSERT (mSoftc->msk_stat_ring != NULL);
+ ASSERT (sc->msk_stat_ring != NULL);
Length = MSK_STAT_RING_SZ;
- Status = mPciIo->Map (mPciIo, EfiPciIoOperationBusMasterCommonBuffer, mSoftc->msk_stat_ring,
- &Length, &mSoftc->msk_stat_ring_paddr, &mSoftc->msk_stat_map);
+ Status = PciIo->Map (PciIo, EfiPciIoOperationBusMasterCommonBuffer, sc->msk_stat_ring,
+ &Length, &sc->msk_stat_ring_paddr, &sc->msk_stat_map);
ASSERT (Length == MSK_STAT_RING_SZ);
if (EFI_ERROR (Status)) {
@@ -1504,16 +1536,20 @@ msk_status_dma_alloc (
static
VOID
msk_status_dma_free (
- VOID
+ struct msk_softc *sc
)
{
- if (mSoftc->msk_stat_map) {
- mPciIo->Unmap (mPciIo, mSoftc->msk_stat_map);
- if (mSoftc->msk_stat_ring) {
- mPciIo->FreeBuffer (mPciIo, EFI_SIZE_TO_PAGES (MSK_STAT_RING_SZ), mSoftc->msk_stat_ring);
- mSoftc->msk_stat_ring = NULL;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+
+ PciIo = sc->PciIo;
+
+ if (sc->msk_stat_map) {
+ PciIo->Unmap (PciIo, sc->msk_stat_map);
+ if (sc->msk_stat_ring) {
+ PciIo->FreeBuffer (PciIo, EFI_SIZE_TO_PAGES (MSK_STAT_RING_SZ), sc->msk_stat_ring);
+ sc->msk_stat_ring = NULL;
}
- mSoftc->msk_stat_map = NULL;
+ sc->msk_stat_map = NULL;
}
}
@@ -1528,8 +1564,11 @@ msk_txrx_dma_alloc (
INTN i;
UINTN Length;
EFI_STATUS Status;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+
+ PciIo = sc_if->msk_softc->PciIo;
- Status = mPciIo->AllocateBuffer (mPciIo, AllocateAnyPages, EfiBootServicesData,
+ Status = PciIo->AllocateBuffer (PciIo, AllocateAnyPages, EfiBootServicesData,
EFI_SIZE_TO_PAGES (MSK_TX_RING_SZ), (VOID**)&sc_if->msk_rdata.msk_tx_ring, 0);
if (EFI_ERROR (Status)) {
@@ -1539,7 +1578,7 @@ msk_txrx_dma_alloc (
ASSERT (sc_if->msk_rdata.msk_tx_ring != NULL);
Length = MSK_TX_RING_SZ;
- Status = mPciIo->Map (mPciIo, EfiPciIoOperationBusMasterCommonBuffer, sc_if->msk_rdata.msk_tx_ring,
+ Status = PciIo->Map (PciIo, EfiPciIoOperationBusMasterCommonBuffer, sc_if->msk_rdata.msk_tx_ring,
&Length, &sc_if->msk_rdata.msk_tx_ring_paddr, &sc_if->msk_cdata.msk_tx_ring_map);
if (EFI_ERROR (Status)) {
@@ -1548,7 +1587,7 @@ msk_txrx_dma_alloc (
}
ASSERT (Length == MSK_TX_RING_SZ);
- Status = mPciIo->AllocateBuffer (mPciIo, AllocateAnyPages, EfiBootServicesData,
+ Status = PciIo->AllocateBuffer (PciIo, AllocateAnyPages, EfiBootServicesData,
EFI_SIZE_TO_PAGES (MSK_RX_RING_SZ), (VOID**)&sc_if->msk_rdata.msk_rx_ring, 0);
if (EFI_ERROR (Status)) {
@@ -1558,7 +1597,7 @@ msk_txrx_dma_alloc (
ASSERT (sc_if->msk_rdata.msk_rx_ring != NULL);
Length = MSK_RX_RING_SZ;
- Status = mPciIo->Map (mPciIo, EfiPciIoOperationBusMasterCommonBuffer, sc_if->msk_rdata.msk_rx_ring,
+ Status = PciIo->Map (PciIo, EfiPciIoOperationBusMasterCommonBuffer, sc_if->msk_rdata.msk_rx_ring,
&Length, &sc_if->msk_rdata.msk_rx_ring_paddr, &sc_if->msk_cdata.msk_rx_ring_map);
if (EFI_ERROR (Status)) {
@@ -1591,12 +1630,15 @@ msk_txrx_dma_free (
struct msk_txdesc *txd;
struct msk_rxdesc *rxd;
INTN i;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+
+ PciIo = sc_if->msk_softc->PciIo;
// Tx ring
if (sc_if->msk_cdata.msk_tx_ring_map) {
- mPciIo->Unmap (mPciIo, sc_if->msk_cdata.msk_tx_ring_map);
+ PciIo->Unmap (PciIo, sc_if->msk_cdata.msk_tx_ring_map);
if (sc_if->msk_rdata.msk_tx_ring) {
- mPciIo->FreeBuffer (mPciIo, EFI_SIZE_TO_PAGES (MSK_TX_RING_SZ), sc_if->msk_rdata.msk_tx_ring);
+ PciIo->FreeBuffer (PciIo, EFI_SIZE_TO_PAGES (MSK_TX_RING_SZ), sc_if->msk_rdata.msk_tx_ring);
sc_if->msk_rdata.msk_tx_ring = NULL;
}
sc_if->msk_cdata.msk_tx_ring_map = NULL;
@@ -1604,9 +1646,9 @@ msk_txrx_dma_free (
// Rx ring
if (sc_if->msk_cdata.msk_rx_ring_map) {
- mPciIo->Unmap (mPciIo, sc_if->msk_cdata.msk_rx_ring_map);
+ PciIo->Unmap (PciIo, sc_if->msk_cdata.msk_rx_ring_map);
if (sc_if->msk_rdata.msk_rx_ring) {
- mPciIo->FreeBuffer (mPciIo, EFI_SIZE_TO_PAGES (MSK_RX_RING_SZ), sc_if->msk_rdata.msk_rx_ring);
+ PciIo->FreeBuffer (PciIo, EFI_SIZE_TO_PAGES (MSK_RX_RING_SZ), sc_if->msk_rdata.msk_rx_ring);
sc_if->msk_rdata.msk_rx_ring = NULL;
}
sc_if->msk_cdata.msk_rx_ring_map = NULL;
@@ -1616,7 +1658,7 @@ msk_txrx_dma_free (
for (i = 0; i < MSK_TX_RING_CNT; i++) {
txd = &sc_if->msk_cdata.msk_txdesc[i];
if (txd->tx_m.DmaMapping) {
- mPciIo->Unmap (mPciIo, txd->tx_m.DmaMapping);
+ PciIo->Unmap (PciIo, txd->tx_m.DmaMapping);
gBS->SetMem (&(txd->tx_m), sizeof (MSK_DMA_BUF), 0);
// We don't own the transmit buffers so don't free them
}
@@ -1625,7 +1667,7 @@ msk_txrx_dma_free (
for (i = 0; i < MSK_RX_RING_CNT; i++) {
rxd = &sc_if->msk_cdata.msk_rxdesc[i];
if (rxd->rx_m.DmaMapping) {
- mPciIo->Unmap (mPciIo, rxd->rx_m.DmaMapping);
+ PciIo->Unmap (PciIo, rxd->rx_m.DmaMapping);
// Free Rx buffers as we own these
if(rxd->rx_m.Buf != NULL) {
gBS->FreePool (rxd->rx_m.Buf);
@@ -1653,12 +1695,14 @@ msk_encap (
UINT32 prod;
UINT32 si;
EFI_STATUS Status;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+ PciIo = sc_if->msk_softc->PciIo;
prod = sc_if->msk_cdata.msk_tx_prod;
txd = &sc_if->msk_cdata.msk_txdesc[prod];
txd_last = txd;
BusLength = m_head->Length;
- Status = mPciIo->Map (mPciIo, EfiPciIoOperationBusMasterRead, m_head->Buf,
+ Status = PciIo->Map (PciIo, EfiPciIoOperationBusMasterRead, m_head->Buf,
&BusLength, &BusPhysAddr, &txd->tx_m.DmaMapping);
if (EFI_ERROR (Status)) {
@@ -1713,6 +1757,7 @@ msk_encap (
EFI_STATUS
mskc_transmit (
+ struct msk_if_softc *sc_if,
UINTN BufferSize,
VOID *Buffer
)
@@ -1733,32 +1778,32 @@ mskc_transmit (
//
LinkedSystemBuf->SystemBuf.Buf = Buffer;
LinkedSystemBuf->SystemBuf.Length = BufferSize;
- InsertTailList (&mSoftc->TransmitQueueHead, &LinkedSystemBuf->Link);
- msk_start (MSK_PORT_A);
+ InsertTailList (&sc_if->TransmitQueueHead, &LinkedSystemBuf->Link);
+ msk_start (sc_if);
return EFI_SUCCESS;
}
void
mskc_getstatus (
+ struct msk_if_softc *sc_if,
OUT UINT32 *InterruptStatus, OPTIONAL
OUT VOID **TxBuf OPTIONAL
)
{
- //struct msk_chain_data* cdata;
MSK_LINKED_SYSTEM_BUF *m_head;
// Interrupt status is not read from the device when InterruptStatus is NULL
if (InterruptStatus != NULL) {
// Check the interrupt lines
- msk_intr ();
+ msk_intr (sc_if->msk_softc);
}
// The transmit buffer status is not read when TxBuf is NULL
if (TxBuf != NULL) {
*((UINT8 **) TxBuf) = (UINT8 *) 0;
- if( !IsListEmpty (&mSoftc->TransmitFreeQueueHead))
+ if( !IsListEmpty (&sc_if->TransmitFreeQueueHead))
{
- m_head = CR (GetFirstNode (&mSoftc->TransmitFreeQueueHead), MSK_LINKED_SYSTEM_BUF, Link, TX_MBUF_SIGNATURE);
+ m_head = CR (GetFirstNode (&sc_if->TransmitFreeQueueHead), MSK_LINKED_SYSTEM_BUF, Link, TX_MBUF_SIGNATURE);
if(m_head != NULL) {
*TxBuf = m_head->SystemBuf.Buf;
RemoveEntryList (&m_head->Link);
@@ -1771,20 +1816,18 @@ mskc_getstatus (
static
VOID
msk_start (
- INT32 Port
+ struct msk_if_softc *sc_if
)
{
EFI_STATUS Status;
- struct msk_if_softc *sc_if;
MSK_LINKED_SYSTEM_BUF *m_head;
INTN enq;
- sc_if = mSoftc->msk_if[Port];
- for (enq = 0; !IsListEmpty (&mSoftc->TransmitQueueHead) &&
+ for (enq = 0; !IsListEmpty (&sc_if->TransmitQueueHead) &&
sc_if->msk_cdata.msk_tx_cnt < (MSK_TX_RING_CNT - MSK_RESERVED_TX_DESC_CNT); )
{
- m_head = CR (GetFirstNode (&mSoftc->TransmitQueueHead), MSK_LINKED_SYSTEM_BUF, Link, TX_MBUF_SIGNATURE);
+ m_head = CR (GetFirstNode (&sc_if->TransmitQueueHead), MSK_LINKED_SYSTEM_BUF, Link, TX_MBUF_SIGNATURE);
if (m_head == NULL) {
break;
}
@@ -1799,19 +1842,19 @@ msk_start (
}
RemoveEntryList (&m_head->Link);
- InsertTailList (&mSoftc->TransmitFreeQueueHead, &m_head->Link);
+ InsertTailList (&sc_if->TransmitFreeQueueHead, &m_head->Link);
enq++;
}
if (enq > 0) {
// Transmit
- CSR_WRITE_2 (mSoftc, Y2_PREF_Q_ADDR (sc_if->msk_txq, PREF_UNIT_PUT_IDX_REG), sc_if->msk_cdata.msk_tx_prod);
+ CSR_WRITE_2 (sc_if->msk_softc, Y2_PREF_Q_ADDR (sc_if->msk_txq, PREF_UNIT_PUT_IDX_REG), sc_if->msk_cdata.msk_tx_prod);
}
}
VOID
mskc_shutdown (
- VOID
+ struct msk_softc *sc
)
{
INTN i;
@@ -1819,35 +1862,36 @@ mskc_shutdown (
OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
- for (i = 0; i < mSoftc->msk_num_port; i++) {
- if (mSoftc->msk_if[i] != NULL) {
- msk_stop (mSoftc->msk_if[i]);
+ for (i = 0; i < sc->msk_num_port; i++) {
+ if (sc->msk_if[i] != NULL) {
+ mskc_stop_if (sc->msk_if[i]);
}
}
- gBS->SetTimer (mSoftc->Timer, TimerCancel, 0);
+ gBS->SetTimer (sc->Timer, TimerCancel, 0);
/* Put hardware reset. */
- CSR_WRITE_2 (mSoftc, B0_CTST, CS_RST_SET);
+ CSR_WRITE_2 (sc, B0_CTST, CS_RST_SET);
gBS->RestoreTPL (OldTpl);
}
EFI_STATUS
mskc_receive (
+ struct msk_if_softc *sc_if,
IN OUT UINTN *BufferSize,
OUT VOID *Buffer
)
{
MSK_LINKED_SYSTEM_BUF *mBuf;
- msk_intr (); // check the interrupt lines
+ msk_intr (sc_if->msk_softc); // check the interrupt lines
- if (IsListEmpty (&mSoftc->ReceiveQueueHead)) {
+ if (IsListEmpty (&sc_if->ReceiveQueueHead)) {
*BufferSize = 0;
return EFI_NOT_READY;
}
- mBuf = CR (GetFirstNode (&mSoftc->ReceiveQueueHead), MSK_LINKED_SYSTEM_BUF, Link, RX_MBUF_SIGNATURE);
+ mBuf = CR (GetFirstNode (&sc_if->ReceiveQueueHead), MSK_LINKED_SYSTEM_BUF, Link, RX_MBUF_SIGNATURE);
if (mBuf->SystemBuf.Length > *BufferSize) {
*BufferSize = mBuf->SystemBuf.Length;
DEBUG ((EFI_D_NET, "Marvell Yukon: Receive buffer is too small: Provided = %d, Received = %d\n",
@@ -1876,9 +1920,11 @@ msk_rxeof (
INTN cons;
INTN rxlen;
MSK_DMA_BUF m;
+ EFI_PCI_IO_PROTOCOL *PciIo;
DEBUG ((EFI_D_NET, "Marvell Yukon: rxeof\n"));
+ PciIo = sc_if->msk_softc->PciIo;
cons = sc_if->msk_cdata.msk_rx_cons;
do {
rxlen = status >> 16;
@@ -1917,12 +1963,12 @@ msk_rxeof (
break;
}
- Status = mPciIo->Flush (mPciIo);
+ Status = PciIo->Flush (PciIo);
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_NET, "Marvell Yukon: failed to Flush DMA\n"));
}
- Status = mPciIo->Unmap (mPciIo, rxd->rx_m.DmaMapping);
+ Status = PciIo->Unmap (PciIo, rxd->rx_m.DmaMapping);
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_NET, "Marvell Yukon: failed to Unmap DMA\n"));
}
@@ -1936,7 +1982,7 @@ msk_rxeof (
m_link->SystemBuf.Buf = m.Buf;
m_link->SystemBuf.Length = len;
- InsertTailList (&mSoftc->ReceiveQueueHead, &m_link->Link);
+ InsertTailList (&sc_if->ReceiveQueueHead, &m_link->Link);
} else {
DEBUG ((EFI_D_NET, "Marvell Yukon: failed to allocate receive buffer link. Dropping Frame\n"));
gBS->FreePool (m.Buf);
@@ -1959,8 +2005,12 @@ msk_txeof (
UINT32 control;
INTN cons;
INTN prog;
+ EFI_PCI_IO_PROTOCOL *PciIo;
DEBUG ((EFI_D_NET, "Marvell Yukon: txeof\n"));
+
+ PciIo = sc_if->msk_softc->PciIo;
+
//
// Go through our tx ring and free mbufs for those
// frames that have been sent.
@@ -1979,7 +2029,7 @@ msk_txeof (
continue;
}
txd = &sc_if->msk_cdata.msk_txdesc[cons];
- mPciIo->Unmap (mPciIo, txd->tx_m.DmaMapping);
+ PciIo->Unmap (PciIo, txd->tx_m.DmaMapping);
gBS->SetMem (&(txd->tx_m), sizeof (MSK_DMA_BUF), 0);
// We don't own the transmit buffers so don't free them
}
@@ -1997,11 +2047,20 @@ mskc_tick (
)
{
EFI_TPL OldTpl;
+ struct msk_softc *sc;
OldTpl = gBS->RaiseTPL (TPL_NOTIFY);
- e1000phy_tick ();
- msk_handle_events ();
+ sc = (struct msk_softc *)Context;
+
+ if (sc->msk_if[MSK_PORT_A] != NULL) {
+ e1000phy_tick (sc->msk_if[MSK_PORT_A]->phy_softc);
+ }
+ if (sc->msk_if[MSK_PORT_B] != NULL) {
+ e1000phy_tick (sc->msk_if[MSK_PORT_B]->phy_softc);
+ }
+
+ msk_handle_events (sc);
gBS->RestoreTPL (OldTpl);
}
@@ -2014,8 +2073,8 @@ msk_intr_phy (
{
UINT16 status;
- msk_phy_readreg (sc_if->msk_md.port, PHY_MARV_INT_STAT);
- status = msk_phy_readreg (sc_if->msk_md.port, PHY_MARV_INT_STAT);
+ msk_phy_readreg (sc_if, PHY_MARV_INT_STAT);
+ status = msk_phy_readreg (sc_if, PHY_MARV_INT_STAT);
// Handle FIFO Underrun/Overflow ?
if ((status & PHY_M_IS_FIFO_ERROR)) {
@@ -2030,16 +2089,19 @@ msk_intr_gmac (
)
{
UINT8 status;
+ struct msk_softc *sc;
- status = CSR_READ_1 (mSoftc, MR_ADDR (sc_if->msk_md.port, GMAC_IRQ_SRC));
+ sc = sc_if->msk_softc;
+
+ status = CSR_READ_1 (sc, MR_ADDR (sc_if->msk_md.port, GMAC_IRQ_SRC));
// GMAC Rx FIFO overrun.
if ((status & GM_IS_RX_FF_OR) != 0) {
- CSR_WRITE_4 (mSoftc, MR_ADDR (sc_if->msk_md.port, RX_GMF_CTRL_T), GMF_CLI_RX_FO);
+ CSR_WRITE_4 (sc, MR_ADDR (sc_if->msk_md.port, RX_GMF_CTRL_T), GMF_CLI_RX_FO);
}
// GMAC Tx FIFO underrun.
if ((status & GM_IS_TX_FF_UR) != 0) {
- CSR_WRITE_4 (mSoftc, MR_ADDR (sc_if->msk_md.port, TX_GMF_CTRL_T), GMF_CLI_TX_FU);
+ CSR_WRITE_4 (sc, MR_ADDR (sc_if->msk_md.port, TX_GMF_CTRL_T), GMF_CLI_TX_FU);
//device_printf (sc_if->msk_if_dev, "Tx FIFO underrun!\n");*/
DEBUG ((EFI_D_NET, "Marvell Yukon: Tx FIFO underrun!\n"));
/*
@@ -2062,47 +2124,51 @@ msk_handle_hwerr (
UINT32 status
)
{
+ struct msk_softc *sc;
+
+ sc = sc_if->msk_softc;
+
if ((status & Y2_IS_PAR_RD1) != 0) {
DEBUG ((EFI_D_NET, "Marvell Yukon: RAM buffer read parity error\n"));
// Clear IRQ.
- CSR_WRITE_2 (mSoftc, SELECT_RAM_BUFFER (sc_if->msk_md.port, B3_RI_CTRL), RI_CLR_RD_PERR);
+ CSR_WRITE_2 (sc, SELECT_RAM_BUFFER (sc_if->msk_md.port, B3_RI_CTRL), RI_CLR_RD_PERR);
}
if ((status & Y2_IS_PAR_WR1) != 0) {
DEBUG ((EFI_D_NET, "Marvell Yukon: RAM buffer write parity error\n"));
// Clear IRQ
- CSR_WRITE_2 (mSoftc, SELECT_RAM_BUFFER (sc_if->msk_md.port, B3_RI_CTRL), RI_CLR_WR_PERR);
+ CSR_WRITE_2 (sc, SELECT_RAM_BUFFER (sc_if->msk_md.port, B3_RI_CTRL), RI_CLR_WR_PERR);
}
if ((status & Y2_IS_PAR_MAC1) != 0) {
DEBUG ((EFI_D_NET, "Marvell Yukon: Tx MAC parity error\n"));
// Clear IRQ
- CSR_WRITE_4 (mSoftc, MR_ADDR (sc_if->msk_md.port, TX_GMF_CTRL_T), GMF_CLI_TX_PE);
+ CSR_WRITE_4 (sc, MR_ADDR (sc_if->msk_md.port, TX_GMF_CTRL_T), GMF_CLI_TX_PE);
}
if ((status & Y2_IS_PAR_RX1) != 0) {
DEBUG ((EFI_D_NET, "Marvell Yukon: Rx parity error\n"));
// Clear IRQ
- CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_rxq, Q_CSR), BMU_CLR_IRQ_PAR);
+ CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_rxq, Q_CSR), BMU_CLR_IRQ_PAR);
}
if ((status & (Y2_IS_TCP_TXS1 | Y2_IS_TCP_TXA1)) != 0) {
DEBUG ((EFI_D_NET, "Marvell Yukon: TCP segmentation error\n"));
// Clear IRQ
- CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_txq, Q_CSR), BMU_CLR_IRQ_TCP);
+ CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_txq, Q_CSR), BMU_CLR_IRQ_TCP);
}
}
static
VOID
msk_intr_hwerr (
- VOID
+ struct msk_softc *sc
)
{
UINT32 status;
UINT32 tlphead[4];
- status = CSR_READ_4 (mSoftc, B0_HWE_ISRC);
+ status = CSR_READ_4 (sc, B0_HWE_ISRC);
// Time Stamp timer overflow.
if ((status & Y2_IS_TIST_OV) != 0) {
- CSR_WRITE_1 (mSoftc, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ);
+ CSR_WRITE_1 (sc, GMAC_TI_ST_CTRL, GMT_ST_CLR_IRQ);
}
if ((status & Y2_IS_PCI_NEXP) != 0) {
/*
@@ -2123,7 +2189,7 @@ msk_intr_hwerr (
DEBUG ((EFI_D_NET, "Marvell Yukon: unexpected IRQ Master error\n"));
}
// Reset all bits in the PCI status register
- clear_pci_errors ();
+ clear_pci_errors (sc);
}
// Check for PCI Express Uncorrectable Error.
@@ -2138,7 +2204,7 @@ msk_intr_hwerr (
* may be performed any longer.
*/
- v32 = CSR_PCI_READ_4 (mSoftc, PEX_UNC_ERR_STAT);
+ v32 = CSR_PCI_READ_4 (sc, PEX_UNC_ERR_STAT);
if ((v32 & PEX_UNSUP_REQ) != 0) {
// Ignore unsupported request error.
DEBUG ((EFI_D_NET, "Marvell Yukon: Uncorrectable PCI Express error\n"));
@@ -2148,26 +2214,26 @@ msk_intr_hwerr (
// Get TLP header form Log Registers.
for (i = 0; i < 4; i++) {
- tlphead[i] = CSR_PCI_READ_4 (mSoftc, PEX_HEADER_LOG + i * 4);
+ tlphead[i] = CSR_PCI_READ_4 (sc, PEX_HEADER_LOG + i * 4);
}
// Check for vendor defined broadcast message.
if (!(tlphead[0] == 0x73004001 && tlphead[1] == 0x7f)) {
- mSoftc->msk_intrhwemask &= ~Y2_IS_PCI_EXP;
- CSR_WRITE_4 (mSoftc, B0_HWE_IMSK, mSoftc->msk_intrhwemask);
- CSR_READ_4 (mSoftc, B0_HWE_IMSK);
+ sc->msk_intrhwemask &= ~Y2_IS_PCI_EXP;
+ CSR_WRITE_4 (sc, B0_HWE_IMSK, sc->msk_intrhwemask);
+ CSR_READ_4 (sc, B0_HWE_IMSK);
}
}
// Clear the interrupt
- CSR_WRITE_1 (mSoftc, B2_TST_CTRL1, TST_CFG_WRITE_ON);
- CSR_PCI_WRITE_4 (mSoftc, PEX_UNC_ERR_STAT, 0xffffffff);
- CSR_WRITE_1 (mSoftc, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
+ CSR_WRITE_1 (sc, B2_TST_CTRL1, TST_CFG_WRITE_ON);
+ CSR_PCI_WRITE_4 (sc, PEX_UNC_ERR_STAT, 0xffffffff);
+ CSR_WRITE_1 (sc, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
}
- if ((status & Y2_HWE_L1_MASK) != 0 && mSoftc->msk_if[MSK_PORT_A] != NULL) {
- msk_handle_hwerr (mSoftc->msk_if[MSK_PORT_A], status);
+ if ((status & Y2_HWE_L1_MASK) != 0 && sc->msk_if[MSK_PORT_A] != NULL) {
+ msk_handle_hwerr (sc->msk_if[MSK_PORT_A], status);
}
- if ((status & Y2_HWE_L2_MASK) != 0 && mSoftc->msk_if[MSK_PORT_B] != NULL) {
- msk_handle_hwerr (mSoftc->msk_if[MSK_PORT_B], status >> 8);
+ if ((status & Y2_HWE_L2_MASK) != 0 && sc->msk_if[MSK_PORT_B] != NULL) {
+ msk_handle_hwerr (sc->msk_if[MSK_PORT_B], status >> 8);
}
}
@@ -2178,16 +2244,15 @@ msk_rxput (
struct msk_if_softc *sc_if
)
{
- CSR_WRITE_2 (mSoftc, Y2_PREF_Q_ADDR (sc_if->msk_rxq, PREF_UNIT_PUT_IDX_REG), sc_if->msk_cdata.msk_rx_prod);
+ CSR_WRITE_2 (sc_if->msk_softc, Y2_PREF_Q_ADDR (sc_if->msk_rxq, PREF_UNIT_PUT_IDX_REG), sc_if->msk_cdata.msk_rx_prod);
}
static
INTN
msk_handle_events (
- VOID
+ struct msk_softc *sc
)
{
- struct msk_if_softc *sc_if;
INTN rxput[2];
struct msk_stat_desc *sd;
UINT32 control;
@@ -2196,16 +2261,17 @@ msk_handle_events (
INTN len;
INTN port;
INTN rxprog;
+ struct msk_if_softc *sc_if;
- if (mSoftc->msk_stat_cons == CSR_READ_2 (mSoftc, STAT_PUT_IDX)) {
+ if (sc->msk_stat_cons == CSR_READ_2 (sc, STAT_PUT_IDX)) {
return (0);
}
rxput[MSK_PORT_A] = rxput[MSK_PORT_B] = 0;
rxprog = 0;
- cons = mSoftc->msk_stat_cons;
+ cons = sc->msk_stat_cons;
for (;;) {
- sd = &mSoftc->msk_stat_ring[cons];
+ sd = &sc->msk_stat_ring[cons];
control = le32toh (sd->msk_control);
if ((control & HW_OWNER) == 0) {
break;
@@ -2215,7 +2281,7 @@ msk_handle_events (
status = le32toh (sd->msk_status);
len = control & STLE_LEN_MASK;
port = (control >> 16) & 0x01;
- sc_if = mSoftc->msk_if[port];
+ sc_if = sc->msk_if[port];
if (sc_if == NULL) {
DEBUG ((EFI_D_NET, "Marvell Yukon: invalid port opcode 0x%08x\n", control & STLE_OP_MASK));
continue;
@@ -2238,11 +2304,11 @@ msk_handle_events (
}
break;
case OP_TXINDEXLE:
- if (mSoftc->msk_if[MSK_PORT_A] != NULL) {
- msk_txeof (mSoftc->msk_if[MSK_PORT_A], status & STLE_TXA1_MSKL);
+ if (sc->msk_if[MSK_PORT_A] != NULL) {
+ msk_txeof (sc->msk_if[MSK_PORT_A], status & STLE_TXA1_MSKL);
}
- if (mSoftc->msk_if[MSK_PORT_B] != NULL) {
- msk_txeof (mSoftc->msk_if[MSK_PORT_B],
+ if (sc->msk_if[MSK_PORT_B] != NULL) {
+ msk_txeof (sc->msk_if[MSK_PORT_B],
((status & STLE_TXA2_MSKL) >>
STLE_TXA2_SHIFTL) |
((len & STLE_TXA2_MSKH) <<
@@ -2254,27 +2320,27 @@ msk_handle_events (
break;
}
MSK_INC (cons, MSK_STAT_RING_CNT);
- if (rxprog > mSoftc->msk_process_limit) {
+ if (rxprog > sc->msk_process_limit) {
break;
}
}
- mSoftc->msk_stat_cons = cons;
+ sc->msk_stat_cons = cons;
if (rxput[MSK_PORT_A] > 0) {
- msk_rxput (mSoftc->msk_if[MSK_PORT_A]);
+ msk_rxput (sc->msk_if[MSK_PORT_A]);
}
if (rxput[MSK_PORT_B] > 0) {
- msk_rxput (mSoftc->msk_if[MSK_PORT_B]);
+ msk_rxput (sc->msk_if[MSK_PORT_B]);
}
- return (mSoftc->msk_stat_cons != CSR_READ_2 (mSoftc, STAT_PUT_IDX));
+ return (sc->msk_stat_cons != CSR_READ_2 (sc, STAT_PUT_IDX));
}
STATIC
VOID
msk_intr (
- VOID
+ struct msk_softc *sc
)
{
struct msk_if_softc *sc_if0;
@@ -2283,18 +2349,18 @@ msk_intr (
INTN domore;
// Reading B0_Y2_SP_ISRC2 masks further interrupts
- Status = CSR_READ_4 (mSoftc, B0_Y2_SP_ISRC2);
+ Status = CSR_READ_4 (sc, B0_Y2_SP_ISRC2);
if (Status == 0 || Status == 0xffffffff ||
- (mSoftc->msk_pflags & MSK_FLAG_SUSPEND) != 0 ||
- (Status & mSoftc->msk_intrmask) == 0)
+ (sc->msk_pflags & MSK_FLAG_SUSPEND) != 0 ||
+ (Status & sc->msk_intrmask) == 0)
{
// Leave ISR - Reenable interrupts
- CSR_WRITE_4 (mSoftc, B0_Y2_SP_ICR, 2);
+ CSR_WRITE_4 (sc, B0_Y2_SP_ICR, 2);
return;
}
- sc_if0 = mSoftc->msk_if[MSK_PORT_A];
- sc_if1 = mSoftc->msk_if[MSK_PORT_B];
+ sc_if0 = sc->msk_if[MSK_PORT_A];
+ sc_if1 = sc->msk_if[MSK_PORT_B];
if ((Status & Y2_IS_IRQ_PHY1) != 0 && sc_if0 != NULL) {
msk_intr_phy (sc_if0);
@@ -2310,27 +2376,27 @@ msk_intr (
}
if ((Status & (Y2_IS_CHK_RX1 | Y2_IS_CHK_RX2)) != 0) {
DEBUG ((EFI_D_NET, "Marvell Yukon: Rx descriptor error\n"));
- mSoftc->msk_intrmask &= ~(Y2_IS_CHK_RX1 | Y2_IS_CHK_RX2);
- CSR_WRITE_4 (mSoftc, B0_IMSK, mSoftc->msk_intrmask);
- CSR_READ_4 (mSoftc, B0_IMSK);
+ sc->msk_intrmask &= ~(Y2_IS_CHK_RX1 | Y2_IS_CHK_RX2);
+ CSR_WRITE_4 (sc, B0_IMSK, sc->msk_intrmask);
+ CSR_READ_4 (sc, B0_IMSK);
}
if ((Status & (Y2_IS_CHK_TXA1 | Y2_IS_CHK_TXA2)) != 0) {
DEBUG ((EFI_D_NET, "Marvell Yukon: Tx descriptor error\n"));
- mSoftc->msk_intrmask &= ~(Y2_IS_CHK_TXA1 | Y2_IS_CHK_TXA2);
- CSR_WRITE_4 (mSoftc, B0_IMSK, mSoftc->msk_intrmask);
- CSR_READ_4 (mSoftc, B0_IMSK);
+ sc->msk_intrmask &= ~(Y2_IS_CHK_TXA1 | Y2_IS_CHK_TXA2);
+ CSR_WRITE_4 (sc, B0_IMSK, sc->msk_intrmask);
+ CSR_READ_4 (sc, B0_IMSK);
}
if ((Status & Y2_IS_HW_ERR) != 0) {
- msk_intr_hwerr ();
+ msk_intr_hwerr (sc);
}
- domore = msk_handle_events ();
+ domore = msk_handle_events (sc);
if ((Status & Y2_IS_STAT_BMU) != 0 && domore == 0) {
- CSR_WRITE_4 (mSoftc, STAT_CTRL, SC_STAT_CLR_IRQ);
+ CSR_WRITE_4 (sc, STAT_CTRL, SC_STAT_CLR_IRQ);
}
// Leave ISR - Reenable interrupts
- CSR_WRITE_4 (mSoftc, B0_Y2_SP_ICR, 2);
+ CSR_WRITE_4 (sc, B0_Y2_SP_ICR, 2);
}
static
@@ -2340,25 +2406,21 @@ msk_set_tx_stfwd (
)
{
// Disable jumbo frames for Tx
- CSR_WRITE_4 (mSoftc, MR_ADDR (sc_if->msk_md.port, TX_GMF_CTRL_T), TX_JUMBO_DIS | TX_STFW_ENA);
+ CSR_WRITE_4 (sc_if->msk_softc, MR_ADDR (sc_if->msk_md.port, TX_GMF_CTRL_T), TX_JUMBO_DIS | TX_STFW_ENA);
}
EFI_STATUS
mskc_init (
- VOID
+ struct msk_if_softc *sc_if
)
{
EFI_STATUS Status;
- // Just init port A
- Status = msk_init (mSoftc->msk_if[MSK_PORT_A]);
+ Status = msk_init (sc_if);
if (EFI_ERROR (Status)) {
return Status;
}
- Status = gBS->SetTimer (mSoftc->Timer, TimerPeriodic, TICKS_PER_SECOND);
- if (EFI_ERROR (Status)) {
- mskc_shutdown ();
- }
+
return Status;
}
@@ -2372,80 +2434,84 @@ msk_init (
UINT16 gmac;
UINT32 reg;
EFI_STATUS Status;
- INTN port = sc_if->msk_md.port;
+ INTN port;
+ IN struct msk_softc *sc;
+
+ sc = sc_if->msk_softc;
+ port = sc_if->msk_md.port;
// Cancel pending I/O and free all Rx/Tx buffers.
- msk_stop (sc_if);
+ mskc_stop_if (sc_if);
sc_if->msk_framesize = MAX_SUPPORTED_PACKET_SIZE;
// GMAC Control reset.
- CSR_WRITE_4 (mSoftc, MR_ADDR (port, GMAC_CTRL), GMC_RST_SET);
- CSR_WRITE_4 (mSoftc, MR_ADDR (port, GMAC_CTRL), GMC_RST_CLR);
- CSR_WRITE_4 (mSoftc, MR_ADDR (port, GMAC_CTRL), GMC_F_LOOPB_OFF);
- if (mSoftc->msk_hw_id == CHIP_ID_YUKON_EX) {
- CSR_WRITE_4 (mSoftc, MR_ADDR (port, GMAC_CTRL), GMC_BYP_MACSECRX_ON | GMC_BYP_MACSECTX_ON | GMC_BYP_RETR_ON);
+ CSR_WRITE_4 (sc, MR_ADDR (port, GMAC_CTRL), GMC_RST_SET);
+ CSR_WRITE_4 (sc, MR_ADDR (port, GMAC_CTRL), GMC_RST_CLR);
+ CSR_WRITE_4 (sc, MR_ADDR (port, GMAC_CTRL), GMC_F_LOOPB_OFF);
+ if (sc->msk_hw_id == CHIP_ID_YUKON_EX) {
+ CSR_WRITE_4 (sc, MR_ADDR (port, GMAC_CTRL), GMC_BYP_MACSECRX_ON | GMC_BYP_MACSECTX_ON | GMC_BYP_RETR_ON);
}
//
// Initialize GMAC first such that speed/duplex/flow-control
// parameters are renegotiated when interface is brought up.
//
- GMAC_WRITE_2 (mSoftc, port, GM_GP_CTRL, 0);
+ GMAC_WRITE_2 (sc, port, GM_GP_CTRL, 0);
// Dummy read the Interrupt Source Register
- CSR_READ_1 (mSoftc, MR_ADDR (port, GMAC_IRQ_SRC));
+ CSR_READ_1 (sc, MR_ADDR (port, GMAC_IRQ_SRC));
// Clear MIB stats
msk_stats_clear (sc_if);
// Disable FCS
- GMAC_WRITE_2 (mSoftc, port, GM_RX_CTRL, GM_RXCR_CRC_DIS);
+ GMAC_WRITE_2 (sc, port, GM_RX_CTRL, GM_RXCR_CRC_DIS);
// Setup Transmit Control Register
- GMAC_WRITE_2 (mSoftc, port, GM_TX_CTRL, TX_COL_THR (TX_COL_DEF));
+ GMAC_WRITE_2 (sc, port, GM_TX_CTRL, TX_COL_THR (TX_COL_DEF));
// Setup Transmit Flow Control Register
- GMAC_WRITE_2 (mSoftc, port, GM_TX_FLOW_CTRL, 0xffff);
+ GMAC_WRITE_2 (sc, port, GM_TX_FLOW_CTRL, 0xffff);
// Setup Transmit Parameter Register
- GMAC_WRITE_2 (mSoftc, port, GM_TX_PARAM,
+ GMAC_WRITE_2 (sc, port, GM_TX_PARAM,
TX_JAM_LEN_VAL (TX_JAM_LEN_DEF) | TX_JAM_IPG_VAL (TX_JAM_IPG_DEF) |
TX_IPG_JAM_DATA(TX_IPG_JAM_DEF) | TX_BACK_OFF_LIM(TX_BOF_LIM_DEF));
gmac = DATA_BLIND_VAL (DATA_BLIND_DEF) | GM_SMOD_VLAN_ENA | IPG_DATA_VAL (IPG_DATA_DEF);
- GMAC_WRITE_2 (mSoftc, port, GM_SERIAL_MODE, gmac);
+ GMAC_WRITE_2 (sc, port, GM_SERIAL_MODE, gmac);
// Set station address
eaddr = sc_if->MacAddress.Addr;
- GMAC_WRITE_2 (mSoftc, port, GM_SRC_ADDR_1L, eaddr[0] | (eaddr[1] << 8));
- GMAC_WRITE_2 (mSoftc, port, GM_SRC_ADDR_1M, eaddr[2] | (eaddr[3] << 8));
- GMAC_WRITE_2 (mSoftc, port, GM_SRC_ADDR_1H, eaddr[4] | (eaddr[5] << 8));
- GMAC_WRITE_2 (mSoftc, port, GM_SRC_ADDR_2L, eaddr[0] | (eaddr[1] << 8));
- GMAC_WRITE_2 (mSoftc, port, GM_SRC_ADDR_2M, eaddr[2] | (eaddr[3] << 8));
- GMAC_WRITE_2 (mSoftc, port, GM_SRC_ADDR_2H, eaddr[4] | (eaddr[5] << 8));
+ GMAC_WRITE_2 (sc, port, GM_SRC_ADDR_1L, eaddr[0] | (eaddr[1] << 8));
+ GMAC_WRITE_2 (sc, port, GM_SRC_ADDR_1M, eaddr[2] | (eaddr[3] << 8));
+ GMAC_WRITE_2 (sc, port, GM_SRC_ADDR_1H, eaddr[4] | (eaddr[5] << 8));
+ GMAC_WRITE_2 (sc, port, GM_SRC_ADDR_2L, eaddr[0] | (eaddr[1] << 8));
+ GMAC_WRITE_2 (sc, port, GM_SRC_ADDR_2M, eaddr[2] | (eaddr[3] << 8));
+ GMAC_WRITE_2 (sc, port, GM_SRC_ADDR_2H, eaddr[4] | (eaddr[5] << 8));
// Disable interrupts for counter overflows
- GMAC_WRITE_2 (mSoftc, port, GM_TX_IRQ_MSK, 0);
- GMAC_WRITE_2 (mSoftc, port, GM_RX_IRQ_MSK, 0);
- GMAC_WRITE_2 (mSoftc, port, GM_TR_IRQ_MSK, 0);
+ GMAC_WRITE_2 (sc, port, GM_TX_IRQ_MSK, 0);
+ GMAC_WRITE_2 (sc, port, GM_RX_IRQ_MSK, 0);
+ GMAC_WRITE_2 (sc, port, GM_TR_IRQ_MSK, 0);
// Configure Rx MAC FIFO
- CSR_WRITE_4 (mSoftc, MR_ADDR (port, RX_GMF_CTRL_T), GMF_RST_SET);
- CSR_WRITE_4 (mSoftc, MR_ADDR (port, RX_GMF_CTRL_T), GMF_RST_CLR);
+ CSR_WRITE_4 (sc, MR_ADDR (port, RX_GMF_CTRL_T), GMF_RST_SET);
+ CSR_WRITE_4 (sc, MR_ADDR (port, RX_GMF_CTRL_T), GMF_RST_CLR);
reg = GMF_OPER_ON | GMF_RX_F_FL_ON;
- if (mSoftc->msk_hw_id == CHIP_ID_YUKON_FE_P || mSoftc->msk_hw_id == CHIP_ID_YUKON_EX) {
+ if (sc->msk_hw_id == CHIP_ID_YUKON_FE_P || sc->msk_hw_id == CHIP_ID_YUKON_EX) {
reg |= GMF_RX_OVER_ON;
}
- CSR_WRITE_4 (mSoftc, MR_ADDR (port, RX_GMF_CTRL_T), reg);
+ CSR_WRITE_4 (sc, MR_ADDR (port, RX_GMF_CTRL_T), reg);
- if (mSoftc->msk_hw_id == CHIP_ID_YUKON_XL) {
+ if (sc->msk_hw_id == CHIP_ID_YUKON_XL) {
// Clear flush mask - HW bug
- CSR_WRITE_4 (mSoftc, MR_ADDR (port, RX_GMF_FL_MSK), 0);
+ CSR_WRITE_4 (sc, MR_ADDR (port, RX_GMF_FL_MSK), 0);
} else {
// Flush Rx MAC FIFO on any flow control or error
- CSR_WRITE_4 (mSoftc, MR_ADDR (port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR);
+ CSR_WRITE_4 (sc, MR_ADDR (port, RX_GMF_FL_MSK), GMR_FS_ANY_ERR);
}
//
@@ -2454,58 +2520,58 @@ msk_init (
//
reg = RX_GMF_FL_THR_DEF + 1;
// Another magic for Yukon FE+ - From Linux
- if (mSoftc->msk_hw_id == CHIP_ID_YUKON_FE_P && mSoftc->msk_hw_rev == CHIP_REV_YU_FE_P_A0) {
+ if (sc->msk_hw_id == CHIP_ID_YUKON_FE_P && sc->msk_hw_rev == CHIP_REV_YU_FE_P_A0) {
reg = 0x178;
}
- CSR_WRITE_2 (mSoftc, MR_ADDR (port, RX_GMF_FL_THR), reg);
+ CSR_WRITE_2 (sc, MR_ADDR (port, RX_GMF_FL_THR), reg);
// Configure Tx MAC FIFO
- CSR_WRITE_4 (mSoftc, MR_ADDR (port, TX_GMF_CTRL_T), GMF_RST_SET);
- CSR_WRITE_4 (mSoftc, MR_ADDR (port, TX_GMF_CTRL_T), GMF_RST_CLR);
- CSR_WRITE_4 (mSoftc, MR_ADDR (port, TX_GMF_CTRL_T), GMF_OPER_ON);
+ CSR_WRITE_4 (sc, MR_ADDR (port, TX_GMF_CTRL_T), GMF_RST_SET);
+ CSR_WRITE_4 (sc, MR_ADDR (port, TX_GMF_CTRL_T), GMF_RST_CLR);
+ CSR_WRITE_4 (sc, MR_ADDR (port, TX_GMF_CTRL_T), GMF_OPER_ON);
// Configure hardware VLAN tag insertion/stripping
msk_setvlan (sc_if);
if ((sc_if->msk_flags & MSK_FLAG_RAMBUF) == 0) {
// Set Rx Pause threshould.
- CSR_WRITE_2 (mSoftc, MR_ADDR (port, RX_GMF_LP_THR), MSK_ECU_LLPP);
- CSR_WRITE_2 (mSoftc, MR_ADDR (port, RX_GMF_UP_THR), MSK_ECU_ULPP);
+ CSR_WRITE_2 (sc, MR_ADDR (port, RX_GMF_LP_THR), MSK_ECU_LLPP);
+ CSR_WRITE_2 (sc, MR_ADDR (port, RX_GMF_UP_THR), MSK_ECU_ULPP);
// Configure store-and-forward for Tx.
msk_set_tx_stfwd (sc_if);
}
- if (mSoftc->msk_hw_id == CHIP_ID_YUKON_FE_P && mSoftc->msk_hw_rev == CHIP_REV_YU_FE_P_A0) {
+ if (sc->msk_hw_id == CHIP_ID_YUKON_FE_P && sc->msk_hw_rev == CHIP_REV_YU_FE_P_A0) {
// Disable dynamic watermark - from Linux
- reg = CSR_READ_4 (mSoftc, MR_ADDR (port, TX_GMF_EA));
+ reg = CSR_READ_4 (sc, MR_ADDR (port, TX_GMF_EA));
reg &= ~0x03;
- CSR_WRITE_4 (mSoftc, MR_ADDR (port, TX_GMF_EA), reg);
+ CSR_WRITE_4 (sc, MR_ADDR (port, TX_GMF_EA), reg);
}
//
// Disable Force Sync bit and Alloc bit in Tx RAM interface
// arbiter as we don't use Sync Tx queue.
//
- CSR_WRITE_1 (mSoftc, MR_ADDR (port, TXA_CTRL), TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC);
+ CSR_WRITE_1 (sc, MR_ADDR (port, TXA_CTRL), TXA_DIS_FSYNC | TXA_DIS_ALLOC | TXA_STOP_RC);
// Enable the RAM Interface Arbiter
- CSR_WRITE_1 (mSoftc, MR_ADDR (port, TXA_CTRL), TXA_ENA_ARB);
+ CSR_WRITE_1 (sc, MR_ADDR (port, TXA_CTRL), TXA_ENA_ARB);
// Setup RAM buffer
msk_set_rambuffer (sc_if);
// Disable Tx sync Queue
- CSR_WRITE_1 (mSoftc, RB_ADDR (sc_if->msk_txsq, RB_CTRL), RB_RST_SET);
+ CSR_WRITE_1 (sc, RB_ADDR (sc_if->msk_txsq, RB_CTRL), RB_RST_SET);
// Setup Tx Queue Bus Memory Interface
- CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_txq, Q_CSR), BMU_CLR_RESET);
- CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_txq, Q_CSR), BMU_OPER_INIT);
- CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_txq, Q_CSR), BMU_FIFO_OP_ON);
- CSR_WRITE_2 (mSoftc, Q_ADDR (sc_if->msk_txq, Q_WM), MSK_BMU_TX_WM);
- switch (mSoftc->msk_hw_id) {
+ CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_txq, Q_CSR), BMU_CLR_RESET);
+ CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_txq, Q_CSR), BMU_OPER_INIT);
+ CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_txq, Q_CSR), BMU_FIFO_OP_ON);
+ CSR_WRITE_2 (sc, Q_ADDR (sc_if->msk_txq, Q_WM), MSK_BMU_TX_WM);
+ switch (sc->msk_hw_id) {
case CHIP_ID_YUKON_EC_U:
- if (mSoftc->msk_hw_rev == CHIP_REV_YU_EC_U_A0) {
+ if (sc->msk_hw_rev == CHIP_REV_YU_EC_U_A0) {
// Fix for Yukon-EC Ultra: set BMU FIFO level
- CSR_WRITE_2 (mSoftc, Q_ADDR (sc_if->msk_txq, Q_AL), MSK_ECU_TXFF_LEV);
+ CSR_WRITE_2 (sc, Q_ADDR (sc_if->msk_txq, Q_AL), MSK_ECU_TXFF_LEV);
}
break;
case CHIP_ID_YUKON_EX:
@@ -2513,68 +2579,68 @@ msk_init (
// Yukon Extreme seems to have silicon bug for
// automatic Tx checksum calculation capability.
//
- if (mSoftc->msk_hw_rev == CHIP_REV_YU_EX_B0) {
- CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_txq, Q_F), F_TX_CHK_AUTO_OFF);
+ if (sc->msk_hw_rev == CHIP_REV_YU_EX_B0) {
+ CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_txq, Q_F), F_TX_CHK_AUTO_OFF);
}
break;
}
// Setup Rx Queue Bus Memory Interface
- CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_rxq, Q_CSR), BMU_CLR_RESET);
- CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_rxq, Q_CSR), BMU_OPER_INIT);
- CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_rxq, Q_CSR), BMU_FIFO_OP_ON);
- CSR_WRITE_2 (mSoftc, Q_ADDR (sc_if->msk_rxq, Q_WM), MSK_BMU_RX_WM);
- if (mSoftc->msk_hw_id == CHIP_ID_YUKON_EC_U && mSoftc->msk_hw_rev >= CHIP_REV_YU_EC_U_A1) {
+ CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_rxq, Q_CSR), BMU_CLR_RESET);
+ CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_rxq, Q_CSR), BMU_OPER_INIT);
+ CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_rxq, Q_CSR), BMU_FIFO_OP_ON);
+ CSR_WRITE_2 (sc, Q_ADDR (sc_if->msk_rxq, Q_WM), MSK_BMU_RX_WM);
+ if (sc->msk_hw_id == CHIP_ID_YUKON_EC_U && sc->msk_hw_rev >= CHIP_REV_YU_EC_U_A1) {
// MAC Rx RAM Read is controlled by hardware
- CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_rxq, Q_F), F_M_RX_RAM_DIS);
+ CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_rxq, Q_F), F_M_RX_RAM_DIS);
}
// truncate too-large frames - from linux
- CSR_WRITE_4 (mSoftc, MR_ADDR (port, RX_GMF_TR_THR), 0x17a);
- CSR_WRITE_4 (mSoftc, MR_ADDR (port, RX_GMF_CTRL_T), RX_TRUNC_ON);
+ CSR_WRITE_4 (sc, MR_ADDR (port, RX_GMF_TR_THR), 0x17a);
+ CSR_WRITE_4 (sc, MR_ADDR (port, RX_GMF_CTRL_T), RX_TRUNC_ON);
- msk_set_prefetch (sc_if->msk_txq, sc_if->msk_rdata.msk_tx_ring_paddr, MSK_TX_RING_CNT - 1);
+ msk_set_prefetch (sc_if, sc_if->msk_txq, sc_if->msk_rdata.msk_tx_ring_paddr, MSK_TX_RING_CNT - 1);
msk_init_tx_ring (sc_if);
// Disable Rx checksum offload and RSS hash
- CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_rxq, Q_CSR), BMU_DIS_RX_CHKSUM | BMU_DIS_RX_RSS_HASH);
- msk_set_prefetch (sc_if->msk_rxq, sc_if->msk_rdata.msk_rx_ring_paddr, MSK_RX_RING_CNT - 1);
+ CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_rxq, Q_CSR), BMU_DIS_RX_CHKSUM | BMU_DIS_RX_RSS_HASH);
+ msk_set_prefetch (sc_if, sc_if->msk_rxq, sc_if->msk_rdata.msk_rx_ring_paddr, MSK_RX_RING_CNT - 1);
Status = msk_init_rx_ring (sc_if);
if (EFI_ERROR (Status)) {
DEBUG ((EFI_D_ERROR, "Marvell Yukon: Initialization failed: no memory for Rx buffers\n"));
- msk_stop (sc_if);
+ mskc_stop_if (sc_if);
return Status;
}
- if (mSoftc->msk_hw_id == CHIP_ID_YUKON_EX) {
+ if (sc->msk_hw_id == CHIP_ID_YUKON_EX) {
// Disable flushing of non-ASF packets
- CSR_WRITE_4 (mSoftc, MR_ADDR (port, RX_GMF_CTRL_T), GMF_RX_MACSEC_FLUSH_OFF);
+ CSR_WRITE_4 (sc, MR_ADDR (port, RX_GMF_CTRL_T), GMF_RX_MACSEC_FLUSH_OFF);
}
// Configure interrupt handling
if (port == MSK_PORT_A) {
- mSoftc->msk_intrmask |= Y2_IS_PORT_A;
- mSoftc->msk_intrhwemask |= Y2_HWE_L1_MASK;
+ sc->msk_intrmask |= Y2_IS_PORT_A;
+ sc->msk_intrhwemask |= Y2_HWE_L1_MASK;
} else {
- mSoftc->msk_intrmask |= Y2_IS_PORT_B;
- mSoftc->msk_intrhwemask |= Y2_HWE_L2_MASK;
+ sc->msk_intrmask |= Y2_IS_PORT_B;
+ sc->msk_intrhwemask |= Y2_HWE_L2_MASK;
}
// Configure IRQ moderation mask.
- CSR_WRITE_4 (mSoftc, B2_IRQM_MSK, mSoftc->msk_intrmask);
- if (mSoftc->msk_int_holdoff > 0) {
+ CSR_WRITE_4 (sc, B2_IRQM_MSK, sc->msk_intrmask);
+ if (sc->msk_int_holdoff > 0) {
// Configure initial IRQ moderation timer value.
- CSR_WRITE_4 (mSoftc, B2_IRQM_INI, MSK_USECS (mSoftc, mSoftc->msk_int_holdoff));
- CSR_WRITE_4 (mSoftc, B2_IRQM_VAL, MSK_USECS (mSoftc, mSoftc->msk_int_holdoff));
+ CSR_WRITE_4 (sc, B2_IRQM_INI, MSK_USECS (sc, sc->msk_int_holdoff));
+ CSR_WRITE_4 (sc, B2_IRQM_VAL, MSK_USECS (sc, sc->msk_int_holdoff));
// Start IRQ moderation.
- CSR_WRITE_1 (mSoftc, B2_IRQM_CTRL, TIM_START);
+ CSR_WRITE_1 (sc, B2_IRQM_CTRL, TIM_START);
}
- CSR_WRITE_4 (mSoftc, B0_HWE_IMSK, mSoftc->msk_intrhwemask);
- CSR_READ_4 (mSoftc, B0_HWE_IMSK);
- CSR_WRITE_4 (mSoftc, B0_IMSK, mSoftc->msk_intrmask);
- CSR_READ_4 (mSoftc, B0_IMSK);
+ CSR_WRITE_4 (sc, B0_HWE_IMSK, sc->msk_intrhwemask);
+ CSR_READ_4 (sc, B0_HWE_IMSK);
+ CSR_WRITE_4 (sc, B0_IMSK, sc->msk_intrmask);
+ CSR_READ_4 (sc, B0_IMSK);
sc_if->msk_flags &= ~MSK_FLAG_LINK;
- e1000phy_mediachg ();
+ e1000phy_mediachg (sc_if->phy_softc);
return Status;
}
@@ -2586,107 +2652,121 @@ msk_set_rambuffer (
)
{
INTN ltpp, utpp;
- INTN port = sc_if->msk_md.port;
+ INTN port;
+ struct msk_softc *sc;
+
+ sc = sc_if->msk_softc;
+ port = sc_if->msk_md.port;
if ((sc_if->msk_flags & MSK_FLAG_RAMBUF) == 0)
return;
// Setup Rx Queue
- CSR_WRITE_1 (mSoftc, RB_ADDR (sc_if->msk_rxq, RB_CTRL), RB_RST_CLR);
- CSR_WRITE_4 (mSoftc, RB_ADDR (sc_if->msk_rxq, RB_START), mSoftc->msk_rxqstart[port] / 8);
- CSR_WRITE_4 (mSoftc, RB_ADDR (sc_if->msk_rxq, RB_END), mSoftc->msk_rxqend[port] / 8);
- CSR_WRITE_4 (mSoftc, RB_ADDR (sc_if->msk_rxq, RB_WP), mSoftc->msk_rxqstart[port] / 8);
- CSR_WRITE_4 (mSoftc, RB_ADDR (sc_if->msk_rxq, RB_RP), mSoftc->msk_rxqstart[port] / 8);
-
- utpp = (mSoftc->msk_rxqend[port] + 1 - mSoftc->msk_rxqstart[port] - MSK_RB_ULPP) / 8;
- ltpp = (mSoftc->msk_rxqend[port] + 1 - mSoftc->msk_rxqstart[port] - MSK_RB_LLPP_B) / 8;
- if (mSoftc->msk_rxqsize < MSK_MIN_RXQ_SIZE) {
+ CSR_WRITE_1 (sc, RB_ADDR (sc_if->msk_rxq, RB_CTRL), RB_RST_CLR);
+ CSR_WRITE_4 (sc, RB_ADDR (sc_if->msk_rxq, RB_START), sc->msk_rxqstart[port] / 8);
+ CSR_WRITE_4 (sc, RB_ADDR (sc_if->msk_rxq, RB_END), sc->msk_rxqend[port] / 8);
+ CSR_WRITE_4 (sc, RB_ADDR (sc_if->msk_rxq, RB_WP), sc->msk_rxqstart[port] / 8);
+ CSR_WRITE_4 (sc, RB_ADDR (sc_if->msk_rxq, RB_RP), sc->msk_rxqstart[port] / 8);
+
+ utpp = (sc->msk_rxqend[port] + 1 - sc->msk_rxqstart[port] - MSK_RB_ULPP) / 8;
+ ltpp = (sc->msk_rxqend[port] + 1 - sc->msk_rxqstart[port] - MSK_RB_LLPP_B) / 8;
+ if (sc->msk_rxqsize < MSK_MIN_RXQ_SIZE) {
ltpp += (MSK_RB_LLPP_B - MSK_RB_LLPP_S) / 8;
}
- CSR_WRITE_4 (mSoftc, RB_ADDR (sc_if->msk_rxq, RB_RX_UTPP), utpp);
- CSR_WRITE_4 (mSoftc, RB_ADDR (sc_if->msk_rxq, RB_RX_LTPP), ltpp);
+ CSR_WRITE_4 (sc, RB_ADDR (sc_if->msk_rxq, RB_RX_UTPP), utpp);
+ CSR_WRITE_4 (sc, RB_ADDR (sc_if->msk_rxq, RB_RX_LTPP), ltpp);
// Set Rx priority (RB_RX_UTHP/RB_RX_LTHP) thresholds?
- CSR_WRITE_1 (mSoftc, RB_ADDR (sc_if->msk_rxq, RB_CTRL), RB_ENA_OP_MD);
- CSR_READ_1 (mSoftc, RB_ADDR (sc_if->msk_rxq, RB_CTRL));
+ CSR_WRITE_1 (sc, RB_ADDR (sc_if->msk_rxq, RB_CTRL), RB_ENA_OP_MD);
+ CSR_READ_1 (sc, RB_ADDR (sc_if->msk_rxq, RB_CTRL));
// Setup Tx Queue.
- CSR_WRITE_1 (mSoftc, RB_ADDR (sc_if->msk_txq, RB_CTRL), RB_RST_CLR);
- CSR_WRITE_4 (mSoftc, RB_ADDR (sc_if->msk_txq, RB_START), mSoftc->msk_txqstart[port] / 8);
- CSR_WRITE_4 (mSoftc, RB_ADDR (sc_if->msk_txq, RB_END), mSoftc->msk_txqend[port] / 8);
- CSR_WRITE_4 (mSoftc, RB_ADDR (sc_if->msk_txq, RB_WP), mSoftc->msk_txqstart[port] / 8);
- CSR_WRITE_4 (mSoftc, RB_ADDR (sc_if->msk_txq, RB_RP), mSoftc->msk_txqstart[port] / 8);
+ CSR_WRITE_1 (sc, RB_ADDR (sc_if->msk_txq, RB_CTRL), RB_RST_CLR);
+ CSR_WRITE_4 (sc, RB_ADDR (sc_if->msk_txq, RB_START), sc->msk_txqstart[port] / 8);
+ CSR_WRITE_4 (sc, RB_ADDR (sc_if->msk_txq, RB_END), sc->msk_txqend[port] / 8);
+ CSR_WRITE_4 (sc, RB_ADDR (sc_if->msk_txq, RB_WP), sc->msk_txqstart[port] / 8);
+ CSR_WRITE_4 (sc, RB_ADDR (sc_if->msk_txq, RB_RP), sc->msk_txqstart[port] / 8);
// Enable Store & Forward for Tx side
- CSR_WRITE_1 (mSoftc, RB_ADDR (sc_if->msk_txq, RB_CTRL), RB_ENA_STFWD);
- CSR_WRITE_1 (mSoftc, RB_ADDR (sc_if->msk_txq, RB_CTRL), RB_ENA_OP_MD);
- CSR_READ_1 (mSoftc, RB_ADDR (sc_if->msk_txq, RB_CTRL));
+ CSR_WRITE_1 (sc, RB_ADDR (sc_if->msk_txq, RB_CTRL), RB_ENA_STFWD);
+ CSR_WRITE_1 (sc, RB_ADDR (sc_if->msk_txq, RB_CTRL), RB_ENA_OP_MD);
+ CSR_READ_1 (sc, RB_ADDR (sc_if->msk_txq, RB_CTRL));
}
STATIC
VOID
msk_set_prefetch (
+ struct msk_if_softc *sc_if,
INTN qaddr,
EFI_PHYSICAL_ADDRESS addr,
UINT32 count
)
{
+ struct msk_softc *sc;
+
+ sc = sc_if->msk_softc;
+
// Reset the prefetch unit
- CSR_WRITE_4 (mSoftc, Y2_PREF_Q_ADDR (qaddr, PREF_UNIT_CTRL_REG), PREF_UNIT_RST_SET);
- CSR_WRITE_4 (mSoftc, Y2_PREF_Q_ADDR (qaddr, PREF_UNIT_CTRL_REG), PREF_UNIT_RST_CLR);
+ CSR_WRITE_4 (sc, Y2_PREF_Q_ADDR (qaddr, PREF_UNIT_CTRL_REG), PREF_UNIT_RST_SET);
+ CSR_WRITE_4 (sc, Y2_PREF_Q_ADDR (qaddr, PREF_UNIT_CTRL_REG), PREF_UNIT_RST_CLR);
// Set LE base address
- CSR_WRITE_4 (mSoftc, Y2_PREF_Q_ADDR (qaddr, PREF_UNIT_ADDR_LOW_REG), MSK_ADDR_LO (addr));
- CSR_WRITE_4 (mSoftc, Y2_PREF_Q_ADDR (qaddr, PREF_UNIT_ADDR_HI_REG), MSK_ADDR_HI (addr));
+ CSR_WRITE_4 (sc, Y2_PREF_Q_ADDR (qaddr, PREF_UNIT_ADDR_LOW_REG), MSK_ADDR_LO (addr));
+ CSR_WRITE_4 (sc, Y2_PREF_Q_ADDR (qaddr, PREF_UNIT_ADDR_HI_REG), MSK_ADDR_HI (addr));
// Set the list last index
- CSR_WRITE_2 (mSoftc, Y2_PREF_Q_ADDR (qaddr, PREF_UNIT_LAST_IDX_REG), count);
+ CSR_WRITE_2 (sc, Y2_PREF_Q_ADDR (qaddr, PREF_UNIT_LAST_IDX_REG), count);
// Turn on prefetch unit
- CSR_WRITE_4 (mSoftc, Y2_PREF_Q_ADDR (qaddr, PREF_UNIT_CTRL_REG), PREF_UNIT_OP_ON);
+ CSR_WRITE_4 (sc, Y2_PREF_Q_ADDR (qaddr, PREF_UNIT_CTRL_REG), PREF_UNIT_OP_ON);
// Dummy read to ensure write
- CSR_READ_4 (mSoftc, Y2_PREF_Q_ADDR (qaddr, PREF_UNIT_CTRL_REG));
+ CSR_READ_4 (sc, Y2_PREF_Q_ADDR (qaddr, PREF_UNIT_CTRL_REG));
}
-static
VOID
-msk_stop (
- struct msk_if_softc *sc_if
+mskc_stop_if (
+ struct msk_if_softc *sc_if
)
{
struct msk_txdesc *txd;
struct msk_rxdesc *rxd;
UINT32 val;
INTN i;
- INTN port = sc_if->msk_md.port;
+ INTN port;
+ EFI_PCI_IO_PROTOCOL *PciIo;
+ struct msk_softc *sc;
+
+ sc = sc_if->msk_softc;
+ PciIo = sc->PciIo;
+ port = sc_if->msk_md.port;
// Disable interrupts
if (port == MSK_PORT_A) {
- mSoftc->msk_intrmask &= ~Y2_IS_PORT_A;
- mSoftc->msk_intrhwemask &= ~Y2_HWE_L1_MASK;
+ sc->msk_intrmask &= ~Y2_IS_PORT_A;
+ sc->msk_intrhwemask &= ~Y2_HWE_L1_MASK;
} else {
- mSoftc->msk_intrmask &= ~Y2_IS_PORT_B;
- mSoftc->msk_intrhwemask &= ~Y2_HWE_L2_MASK;
+ sc->msk_intrmask &= ~Y2_IS_PORT_B;
+ sc->msk_intrhwemask &= ~Y2_HWE_L2_MASK;
}
- CSR_WRITE_4 (mSoftc, B0_HWE_IMSK, mSoftc->msk_intrhwemask);
- CSR_READ_4 (mSoftc, B0_HWE_IMSK);
- CSR_WRITE_4 (mSoftc, B0_IMSK, mSoftc->msk_intrmask);
- CSR_READ_4 (mSoftc, B0_IMSK);
+ CSR_WRITE_4 (sc, B0_HWE_IMSK, sc->msk_intrhwemask);
+ CSR_READ_4 (sc, B0_HWE_IMSK);
+ CSR_WRITE_4 (sc, B0_IMSK, sc->msk_intrmask);
+ CSR_READ_4 (sc, B0_IMSK);
// Disable Tx/Rx MAC.
- val = GMAC_READ_2 (mSoftc, port, GM_GP_CTRL);
+ val = GMAC_READ_2 (sc, port, GM_GP_CTRL);
val &= ~(GM_GPCR_RX_ENA | GM_GPCR_TX_ENA);
- GMAC_WRITE_2 (mSoftc, port, GM_GP_CTRL, val);
+ GMAC_WRITE_2 (sc, port, GM_GP_CTRL, val);
// Read again to ensure writing.
- GMAC_READ_2 (mSoftc, port, GM_GP_CTRL);
+ GMAC_READ_2 (sc, port, GM_GP_CTRL);
// Update stats and clear counters
msk_stats_update (sc_if);
// Stop Tx BMU
- CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_txq, Q_CSR), BMU_STOP);
- val = CSR_READ_4 (mSoftc, Q_ADDR (sc_if->msk_txq, Q_CSR));
+ CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_txq, Q_CSR), BMU_STOP);
+ val = CSR_READ_4 (sc, Q_ADDR (sc_if->msk_txq, Q_CSR));
for (i = 0; i < MSK_TIMEOUT; i++) {
if ((val & (BMU_STOP | BMU_IDLE)) == 0) {
- CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_txq, Q_CSR), BMU_STOP);
- val = CSR_READ_4 (mSoftc, Q_ADDR (sc_if->msk_txq, Q_CSR));
+ CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_txq, Q_CSR), BMU_STOP);
+ val = CSR_READ_4 (sc, Q_ADDR (sc_if->msk_txq, Q_CSR));
} else {
break;
}
@@ -2695,29 +2775,29 @@ msk_stop (
if (i == MSK_TIMEOUT) {
DEBUG ((EFI_D_NET, "Marvell Yukon: Tx BMU stop failed\n"));
}
- CSR_WRITE_1 (mSoftc, RB_ADDR (sc_if->msk_txq, RB_CTRL), RB_RST_SET | RB_DIS_OP_MD);
+ CSR_WRITE_1 (sc, RB_ADDR (sc_if->msk_txq, RB_CTRL), RB_RST_SET | RB_DIS_OP_MD);
// Disable all GMAC interrupt.
- CSR_WRITE_1 (mSoftc, MR_ADDR (port, GMAC_IRQ_MSK), 0);
+ CSR_WRITE_1 (sc, MR_ADDR (port, GMAC_IRQ_MSK), 0);
// Disable PHY interrupt. */
- msk_phy_writereg (port, PHY_MARV_INT_MASK, 0);
+ msk_phy_writereg (sc_if, PHY_MARV_INT_MASK, 0);
// Disable the RAM Interface Arbiter.
- CSR_WRITE_1 (mSoftc, MR_ADDR (port, TXA_CTRL), TXA_DIS_ARB);
+ CSR_WRITE_1 (sc, MR_ADDR (port, TXA_CTRL), TXA_DIS_ARB);
// Reset the PCI FIFO of the async Tx queue
- CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_txq, Q_CSR), BMU_RST_SET | BMU_FIFO_RST);
+ CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_txq, Q_CSR), BMU_RST_SET | BMU_FIFO_RST);
// Reset the Tx prefetch units
- CSR_WRITE_4 (mSoftc, Y2_PREF_Q_ADDR (sc_if->msk_txq, PREF_UNIT_CTRL_REG), PREF_UNIT_RST_SET);
+ CSR_WRITE_4 (sc, Y2_PREF_Q_ADDR (sc_if->msk_txq, PREF_UNIT_CTRL_REG), PREF_UNIT_RST_SET);
// Reset the RAM Buffer async Tx queue
- CSR_WRITE_1 (mSoftc, RB_ADDR (sc_if->msk_txq, RB_CTRL), RB_RST_SET);
+ CSR_WRITE_1 (sc, RB_ADDR (sc_if->msk_txq, RB_CTRL), RB_RST_SET);
// Reset Tx MAC FIFO.
- CSR_WRITE_4 (mSoftc, MR_ADDR (port, TX_GMF_CTRL_T), GMF_RST_SET);
+ CSR_WRITE_4 (sc, MR_ADDR (port, TX_GMF_CTRL_T), GMF_RST_SET);
// Set Pause Off.
- CSR_WRITE_4 (mSoftc, MR_ADDR (port, GMAC_CTRL), GMC_PAUSE_OFF);
+ CSR_WRITE_4 (sc, MR_ADDR (port, GMAC_CTRL), GMC_PAUSE_OFF);
/*
* The Rx Stop command will not work for Yukon-2 if the BMU does not
@@ -2731,9 +2811,9 @@ msk_stop (
*/
// Disable the RAM Buffer receive queue
- CSR_WRITE_1 (mSoftc, RB_ADDR (sc_if->msk_rxq, RB_CTRL), RB_DIS_OP_MD);
+ CSR_WRITE_1 (sc, RB_ADDR (sc_if->msk_rxq, RB_CTRL), RB_DIS_OP_MD);
for (i = 0; i < MSK_TIMEOUT; i++) {
- if (CSR_READ_1 (mSoftc, RB_ADDR (sc_if->msk_rxq, Q_RSL)) == CSR_READ_1 (mSoftc, RB_ADDR (sc_if->msk_rxq, Q_RL))) {
+ if (CSR_READ_1 (sc, RB_ADDR (sc_if->msk_rxq, Q_RSL)) == CSR_READ_1 (sc, RB_ADDR (sc_if->msk_rxq, Q_RL))) {
break;
}
gBS->Stall (1);
@@ -2741,19 +2821,19 @@ msk_stop (
if (i == MSK_TIMEOUT) {
DEBUG ((EFI_D_NET, "Marvell Yukon: Rx BMU stop failed\n"));
}
- CSR_WRITE_4 (mSoftc, Q_ADDR (sc_if->msk_rxq, Q_CSR), BMU_RST_SET | BMU_FIFO_RST);
+ CSR_WRITE_4 (sc, Q_ADDR (sc_if->msk_rxq, Q_CSR), BMU_RST_SET | BMU_FIFO_RST);
// Reset the Rx prefetch unit.
- CSR_WRITE_4 (mSoftc, Y2_PREF_Q_ADDR (sc_if->msk_rxq, PREF_UNIT_CTRL_REG), PREF_UNIT_RST_SET);
+ CSR_WRITE_4 (sc, Y2_PREF_Q_ADDR (sc_if->msk_rxq, PREF_UNIT_CTRL_REG), PREF_UNIT_RST_SET);
// Reset the RAM Buffer receive queue.
- CSR_WRITE_1 (mSoftc, RB_ADDR (sc_if->msk_rxq, RB_CTRL), RB_RST_SET);
+ CSR_WRITE_1 (sc, RB_ADDR (sc_if->msk_rxq, RB_CTRL), RB_RST_SET);
// Reset Rx MAC FIFO.
- CSR_WRITE_4 (mSoftc, MR_ADDR (port, RX_GMF_CTRL_T), GMF_RST_SET);
+ CSR_WRITE_4 (sc, MR_ADDR (port, RX_GMF_CTRL_T), GMF_RST_SET);
// Free Rx and Tx mbufs still in the queues
for (i = 0; i < MSK_RX_RING_CNT; i++) {
rxd = &sc_if->msk_cdata.msk_rxdesc[i];
if (rxd->rx_m.Buf != NULL) {
- mPciIo->Unmap (mPciIo, rxd->rx_m.DmaMapping);
+ PciIo->Unmap (PciIo, rxd->rx_m.DmaMapping);
if(rxd->rx_m.Buf != NULL) {
gBS->FreePool (rxd->rx_m.Buf);
rxd->rx_m.Buf = NULL;
@@ -2765,7 +2845,7 @@ msk_stop (
for (i = 0; i < MSK_TX_RING_CNT; i++) {
txd = &sc_if->msk_cdata.msk_txdesc[i];
if (txd->tx_m.Buf != NULL) {
- mPciIo->Unmap (mPciIo, txd->tx_m.DmaMapping);
+ PciIo->Unmap (PciIo, txd->tx_m.DmaMapping);
gBS->SetMem (&(txd->tx_m), sizeof (MSK_DMA_BUF), 0);
// We don't own the transmit buffers so don't free them
}
@@ -2782,7 +2862,7 @@ msk_stop (
* counter clears high 16 bits of the counter such that accessing
* lower 16 bits should be the last operation.
*/
-#define MSK_READ_MIB32(x, y) (((UINT32)GMAC_READ_2 (mSoftc, x, (y) + 4)) << 16) + (UINT32)GMAC_READ_2 (mSoftc, x, y)
+#define MSK_READ_MIB32(x, y) (((UINT32)GMAC_READ_2 (sc, x, (y) + 4)) << 16) + (UINT32)GMAC_READ_2 (sc, x, y)
#define MSK_READ_MIB64(x, y) (((UINT64)MSK_READ_MIB32 (x, (y) + 8)) << 32) + (UINT64)MSK_READ_MIB32 (x, y)
static
@@ -2794,11 +2874,15 @@ msk_stats_clear (
UINT16 gmac;
INTN val;
INTN i;
- INTN port = sc_if->msk_md.port;
+ INTN port;
+ struct msk_softc *sc;
+
+ sc = sc_if->msk_softc;
+ port = sc_if->msk_md.port;
// Set MIB Clear Counter Mode.
- gmac = GMAC_READ_2 (mSoftc, port, GM_PHY_ADDR);
- GMAC_WRITE_2 (mSoftc, port, GM_PHY_ADDR, gmac | GM_PAR_MIB_CLR);
+ gmac = GMAC_READ_2 (sc, port, GM_PHY_ADDR);
+ GMAC_WRITE_2 (sc, port, GM_PHY_ADDR, gmac | GM_PAR_MIB_CLR);
// Read all MIB Counters with Clear Mode set
for (i = GM_RXF_UC_OK; i <= GM_TXE_FIFO_UR; i += sizeof (UINT32)) {
val = MSK_READ_MIB32 (port, i);
@@ -2806,7 +2890,7 @@ msk_stats_clear (
}
// Clear MIB Clear Counter Mode
gmac &= ~GM_PAR_MIB_CLR;
- GMAC_WRITE_2 (mSoftc, port, GM_PHY_ADDR, gmac);
+ GMAC_WRITE_2 (sc, port, GM_PHY_ADDR, gmac);
}
static
@@ -2818,12 +2902,15 @@ msk_stats_update (
struct msk_hw_stats *stats;
UINT16 gmac;
INTN val;
- INTN port = sc_if->msk_md.port;
+ INTN port;
+ struct msk_softc *sc;
+ sc = sc_if->msk_softc;
+ port = sc_if->msk_md.port;
stats = &sc_if->msk_stats;
/* Set MIB Clear Counter Mode. */
- gmac = GMAC_READ_2 (mSoftc, port, GM_PHY_ADDR);
- GMAC_WRITE_2 (mSoftc, port, GM_PHY_ADDR, gmac | GM_PAR_MIB_CLR);
+ gmac = GMAC_READ_2 (sc, port, GM_PHY_ADDR);
+ GMAC_WRITE_2 (sc, port, GM_PHY_ADDR, gmac | GM_PAR_MIB_CLR);
/* Rx stats. */
stats->rx_ucast_frames += MSK_READ_MIB32 (port, GM_RXF_UC_OK);
@@ -2874,7 +2961,7 @@ msk_stats_update (
/* Clear MIB Clear Counter Mode. */
gmac &= ~GM_PAR_MIB_CLR;
- GMAC_WRITE_2 (mSoftc, port, GM_PHY_ADDR, gmac);
+ GMAC_WRITE_2 (sc, port, GM_PHY_ADDR, gmac);
}
#undef MSK_READ_MIB32
diff --git a/Drivers/Net/MarvellYukonDxe/if_msk.h b/Drivers/Net/MarvellYukonDxe/if_msk.h
index 110c562..861f730 100644
--- a/Drivers/Net/MarvellYukonDxe/if_msk.h
+++ b/Drivers/Net/MarvellYukonDxe/if_msk.h
@@ -13,20 +13,30 @@
*
**/
+#ifndef _IF_MSK_H_
+#define _IF_MSK_H_
+
#include <Uefi.h>
+#include <Protocol/PciIo.h>
+#include "miivar.h"
+#include "if_mskreg.h"
#define MAX_SUPPORTED_PACKET_SIZE (1566) /* No jumbo frame size support */
EFI_STATUS mskc_probe (EFI_PCI_IO_PROTOCOL *PciIo);
-EFI_STATUS mskc_attach (EFI_PCI_IO_PROTOCOL *PciIo, EFI_MAC_ADDRESS *Mac);
-void mskc_detach (void);
+EFI_STATUS mskc_attach (EFI_PCI_IO_PROTOCOL *, struct msk_softc **);
+EFI_STATUS mskc_attach_if (struct msk_if_softc *, UINTN);
+void mskc_detach (struct msk_softc *);
+VOID mskc_detach_if (struct msk_if_softc *);
-EFI_STATUS mskc_init (void);
-void mskc_shutdown (void);
+EFI_STATUS mskc_init (struct msk_if_softc *);
+void mskc_shutdown (struct msk_softc *);
+VOID mskc_stop_if (struct msk_if_softc *);
void
mskc_rxfilter (
+ IN struct msk_if_softc *sc_if,
IN UINT32 FilterFlags,
IN UINTN MCastFilterCnt,
IN EFI_MAC_ADDRESS *MCastFilter
@@ -34,18 +44,23 @@ mskc_rxfilter (
EFI_STATUS
mskc_transmit (
+ IN struct msk_if_softc *sc_if,
IN UINTN BufferSize,
IN VOID *Buffer
);
EFI_STATUS
mskc_receive (
+ IN struct msk_if_softc *sc_if,
IN OUT UINTN *BufferSize,
OUT VOID *Buffer
);
void
mskc_getstatus (
+ IN struct msk_if_softc *sc,
OUT UINT32 *InterruptStatus, OPTIONAL
OUT VOID **TxBuf OPTIONAL
);
+
+#endif /* _IF_MSK_H_ */
diff --git a/Drivers/Net/MarvellYukonDxe/if_mskreg.h b/Drivers/Net/MarvellYukonDxe/if_mskreg.h
index 7718536..261639a 100644
--- a/Drivers/Net/MarvellYukonDxe/if_mskreg.h
+++ b/Drivers/Net/MarvellYukonDxe/if_mskreg.h
@@ -99,6 +99,9 @@
/*$FreeBSD: src/sys/dev/msk/if_mskreg.h,v 1.27.2.10.2.1 2010/06/14 02:09:06 kensmith Exp $*/
+#ifndef _IF_MSKREG_H_
+#define _IF_MSKREG_H_
+
/*
* SysKonnect PCI vendor ID
*/
@@ -2460,10 +2463,8 @@ struct msk_softc {
INTN msk_int_holdoff;
INTN msk_process_limit;
INTN msk_stat_cons;
- LIST_ENTRY TransmitQueueHead;
- LIST_ENTRY TransmitFreeQueueHead;
- LIST_ENTRY ReceiveQueueHead;
EFI_EVENT Timer;
+ EFI_PCI_IO_PROTOCOL *PciIo;
};
#define MSK_USECS(sc, us) ((sc)->msk_clock * (us))
@@ -2497,9 +2498,16 @@ struct msk_if_softc {
struct msk_chain_data msk_cdata;
struct msk_ring_data msk_rdata;
struct msk_hw_stats msk_stats;
+ struct msk_softc *msk_softc; /* parent controller */
+ VOID *phy_softc; /* interface phy */
+ LIST_ENTRY TransmitQueueHead;
+ LIST_ENTRY TransmitFreeQueueHead;
+ LIST_ENTRY ReceiveQueueHead;
EFI_MAC_ADDRESS MacAddress;
};
#define MSK_TIMEOUT 1000
#define MSK_PHY_POWERUP 1
#define MSK_PHY_POWERDOWN 0
+
+#endif /* _IF_MSKREG_H_ */
diff --git a/Drivers/Net/MarvellYukonDxe/miivar.h b/Drivers/Net/MarvellYukonDxe/miivar.h
index 1903ef6..ff28017 100644
--- a/Drivers/Net/MarvellYukonDxe/miivar.h
+++ b/Drivers/Net/MarvellYukonDxe/miivar.h
@@ -55,13 +55,6 @@
#define _DEV_MII_MIIVAR_H_
/*
- * Callbacks from MII layer into network interface device driver.
- */
-INTN msk_phy_readreg (INTN, INTN);
-INTN msk_phy_writereg (INTN, INTN, INTN);
-void msk_miibus_statchg (INTN);
-
-/*
* A network interface driver has one of these structures in its softc.
* It is the interface from the network interface driver to the MII
* layer.
@@ -181,9 +174,9 @@ struct mii_phydesc {
#define MII_PHY_DESC(a, b) { MII_OUI_ ## a, MII_MODEL_ ## a ## _ ## b, MII_STR_ ## a ## _ ## b }
#define MII_PHY_END { 0, 0, NULL }
-#define PHY_READ(p, r) msk_phy_readreg ((p)->mmd->port, (r))
+#define PHY_READ(p, r) msk_phy_readreg ((p)->sc_if, (r))
-#define PHY_WRITE(p, r, v) msk_phy_writereg ((p)->mmd->port, (r), (v))
+#define PHY_WRITE(p, r, v) msk_phy_writereg ((p)->sc_if, (r), (v))
struct msk_mii_data {
INTN port;
@@ -191,8 +184,4 @@ struct msk_mii_data {
INTN mii_flags;
};
-EFI_STATUS e1000_probe_and_attach (struct mii_data *mii, const struct msk_mii_data *mmd);
-void e1000phy_tick (void);
-void e1000phy_mediachg (void);
-
#endif /* _DEV_MII_MIIVAR_H_ */
--
2.7.4
9 years
- 3
- 4
[PATCH v2 00/24] Enable Hisilicon new platform D05
by Heyi Guo
Hisilicon new platform D05 will be pushed to Linaro Reference Platform
16.12 release, and these patches are to enable Hisilicon D05 in OPP.
Code can also be found in my linaro repo:
http://git.linaro.org/people/heyi.guo/OpenPlatformPkg.git
branch: rp-16.12-07-d05
Patch 24 is for binary and too large to be sent to mailing list; please
find it in the above git repo.
Changelog v1->v2:
* Improve the code according to Leif's comments
- PCIe code is improved to reduce similar branch of Hi1616
- Unrelated changes are split into separate patches
- Other code format improvement
Heyi Guo (22):
D02/D03: workaround to fix timer interrupt issue
Hisilicon/PcieInit: fix typo for PCIE_APB_SLAVE_BASE_1610
Hisilicon/Hi1610/PCIe: Added performance tuning
Hisilicon/Hi1610/PCIe: Remove lane reversal code
Hisilicon/PCIe: extend support for maximum 8 root ports
Hisilicon/PCIe: support different memory address in PCIe domain
Hisilicon/PCIe: support multiple MSI target addresses
Hisilicon/PciHostBridgeDxe: add support for Hi1616
Hisilicon/PCIeInit: Remove unused function PciePortReset
Hisilicon/PCIeInit: fix PciePcsInit bug
Hisilicon/I2CLib: Extend to support Hi1616
Hisilicon/HwMemInitLib.h: fix typo for phyDqsFallRiseDelay
Hisilicon: update memory init data structure to support D05
Hisilicon/PlatformSysCtrlLib: add more interfaces to support D05
Platforms/Hisilicon: add D05 ACPI tables
Platforms/Hisilicon: override AcpiPlatformDxe to support NUMA
OemMiscLib: Add interface for SAS driver
D03/OemNicConfig: add CpldIoLib to avoid potential build error
Platforms/Hisilicon: add D05 platform modules and files
UpdateFdtDxe: Add GenericMemTestProtocol dependency
Platforms/Hisilicon: add D05 binary module INF files
Platforms/Hisilicon: Add D05 binary files
Peicong Li (2):
D03/D05: Change to access EEPROM data bytewise
Hisilicon/Serdes: add support for D05
.../Library/Hi1616Serdes/Hi1616SerdesLib.inf | 48 +
.../Library/Hi1616Serdes/Hi1616SerdesLib.lib | Bin 0 -> 707246 bytes
.../PlatformSysCtrlLibHi1616.inf | 55 +
.../PlatformSysCtrlLibHi1616.lib | Bin 0 -> 358602 bytes
.../Drivers/HisiAcpiPlatformDxe/AcpiPlatform.c | 299 +++++
.../Drivers/HisiAcpiPlatformDxe/AcpiPlatform.uni | 22 +
.../HisiAcpiPlatformDxe/AcpiPlatformDxe.inf | 59 +
.../HisiAcpiPlatformDxe/AcpiPlatformExtra.uni | 20 +
.../Drivers/HisiAcpiPlatformDxe/UpdateAcpiTable.c | 127 ++
.../Drivers/PciHostBridgeDxe/PciHostBridge.c | 217 +++-
.../Drivers/PciHostBridgeDxe/PciHostBridge.h | 2 +
.../Drivers/PciHostBridgeDxe/PciRootBridgeIo.c | 8 +-
.../Type09/MiscSystemSlotDesignationFunction.c | 15 +-
.../Drivers/UpdateFdtDxe/UpdateFdtDxe.inf | 4 +-
.../Hi1610/Drivers/PcieInit1610/PcieInit.c | 57 +-
.../Hi1610/Drivers/PcieInit1610/PcieInitDxe.inf | 6 +-
.../Hi1610/Drivers/PcieInit1610/PcieInitLib.c | 249 ++--
.../Hi1610/Drivers/PcieInit1610/PcieInitLib.h | 13 +-
.../Hi1610/Drivers/PcieInit1610/PcieKernelApi.h | 2 -
Chips/Hisilicon/Hi1610/Include/Library/SerdesLib.h | 2 +-
.../Hi1616/D05AcpiTables/AcpiTablesHi1616.inf | 58 +
Chips/Hisilicon/Hi1616/D05AcpiTables/D05Iort.asl | 651 +++++++++++
Chips/Hisilicon/Hi1616/D05AcpiTables/D05Mcfg.aslc | 127 ++
Chips/Hisilicon/Hi1616/D05AcpiTables/D05Slit.aslc | 64 +
Chips/Hisilicon/Hi1616/D05AcpiTables/D05Srat.aslc | 129 ++
Chips/Hisilicon/Hi1616/D05AcpiTables/Dsdt/CPU.asl | 280 +++++
Chips/Hisilicon/Hi1616/D05AcpiTables/Dsdt/Com.asl | 36 +
.../Hisilicon/Hi1616/D05AcpiTables/Dsdt/D05Hns.asl | 1234 ++++++++++++++++++++
.../Hisilicon/Hi1616/D05AcpiTables/Dsdt/D05I2c.asl | 58 +
.../Hi1616/D05AcpiTables/Dsdt/D05Mbig.asl | 437 +++++++
.../Hisilicon/Hi1616/D05AcpiTables/Dsdt/D05Pci.asl | 436 +++++++
.../Hisilicon/Hi1616/D05AcpiTables/Dsdt/D05Sas.asl | 247 ++++
.../Hisilicon/Hi1616/D05AcpiTables/Dsdt/D05Usb.asl | 135 +++
.../Hi1616/D05AcpiTables/Dsdt/DsdtHi1616.asl | 31 +
Chips/Hisilicon/Hi1616/D05AcpiTables/Dsdt/Lpc.asl | 25 +
Chips/Hisilicon/Hi1616/D05AcpiTables/Facs.aslc | 67 ++
Chips/Hisilicon/Hi1616/D05AcpiTables/Fadt.aslc | 91 ++
Chips/Hisilicon/Hi1616/D05AcpiTables/Gtdt.aslc | 96 ++
.../Hi1616/D05AcpiTables/Hi1616Platform.h | 48 +
.../Hisilicon/Hi1616/D05AcpiTables/MadtHi1616.aslc | 282 +++++
Chips/Hisilicon/Hi1616/Include/Library/SerdesLib.h | 78 ++
Chips/Hisilicon/HisiPkg.dec | 116 +-
Chips/Hisilicon/Include/Library/AcpiNextLib.h | 19 +-
Chips/Hisilicon/Include/Library/HwMemInitLib.h | 60 +-
Chips/Hisilicon/Include/Library/I2CLib.h | 2 +-
Chips/Hisilicon/Include/Library/OemMiscLib.h | 1 +
Chips/Hisilicon/Include/Library/PlatformPciLib.h | 136 ++-
.../Hisilicon/Include/Library/PlatformSysCtrlLib.h | 9 +
Chips/Hisilicon/Include/PlatformArch.h | 4 +
Chips/Hisilicon/Include/Regs/HisiPcieV1RegOffset.h | 1 +
Chips/Hisilicon/Library/I2CLib/I2CHw.h | 1 +
Chips/Hisilicon/Library/I2CLib/I2CLib.c | 50 +-
Chips/Hisilicon/Pv660/Include/Library/SerdesLib.h | 2 +-
.../Drivers/GetInfoFromBmc/GetInfoFromBmc.depex | Bin 0 -> 2 bytes
.../D05/Drivers/GetInfoFromBmc/GetInfoFromBmc.efi | Bin 0 -> 19552 bytes
.../D05/Drivers/GetInfoFromBmc/GetInfoFromBmc.inf | 26 +
.../Ipmi/IpmiInterfaceDxe/IpmiInterfaceDxe.depex | Bin 0 -> 2 bytes
.../Ipmi/IpmiInterfaceDxe/IpmiInterfaceDxe.efi | Bin 0 -> 25696 bytes
.../Ipmi/IpmiInterfaceDxe/IpmiInterfaceDxe.inf | 28 +
.../Ipmi/IpmiInterfacePei/IpmiInterfacePei.efi | Bin 0 -> 22528 bytes
.../Ipmi/IpmiInterfacePei/IpmiInterfacePei.inf | 32 +
.../D05/Drivers/IpmiMiscOpDxe/IpmiMiscOp.efi | Bin 0 -> 23136 bytes
.../D05/Drivers/IpmiMiscOpDxe/IpmiMiscOpDxe.depex | Bin 0 -> 2 bytes
.../D05/Drivers/IpmiMiscOpDxe/IpmiMiscOpDxe.inf | 27 +
.../Drivers/IpmiWatchdogDxe/IpmiWatchdogDxe.depex | Bin 0 -> 2 bytes
.../Drivers/IpmiWatchdogDxe/IpmiWatchdogDxe.efi | Bin 0 -> 15968 bytes
.../Drivers/IpmiWatchdogDxe/IpmiWatchdogDxe.inf | 27 +
.../Net/SnpPV660DxeMac0/SnpPV600DxeMac0.efi | Bin 0 -> 56512 bytes
.../Net/SnpPV660DxeMac0/SnpPV600DxeMac0.inf | 29 +
.../Net/SnpPV660DxeMac1/SnpPV600DxeMac1.efi | Bin 0 -> 56512 bytes
.../Net/SnpPV660DxeMac1/SnpPV600DxeMac1.inf | 28 +
.../Net/SnpPV660DxeMac4/SnpPV600DxeMac4.efi | Bin 0 -> 56512 bytes
.../Net/SnpPV660DxeMac4/SnpPV600DxeMac4.inf | 27 +
.../Net/SnpPV660DxeMac5/SnpPV600DxeMac5.efi | Bin 0 -> 56512 bytes
.../Net/SnpPV660DxeMac5/SnpPV600DxeMac5.inf | 27 +
.../Binary/D05/Drivers/OhciDxe/NativeOhci.efi | Bin 0 -> 48000 bytes
.../Binary/D05/Drivers/OhciDxe/OhciDxe.inf | 26 +
.../ReportPciePlugDidVidToBmc.depex | Bin 0 -> 2 bytes
.../ReportPciePlugDidVidToBmc.efi | Bin 0 -> 21536 bytes
.../ReportPciePlugDidVidToBmc.inf | 25 +
.../Binary/D05/Drivers/SFC/SFCDriver.depex | Bin 0 -> 2 bytes
.../Hisilicon/Binary/D05/Drivers/SFC/SFCDriver.efi | Bin 0 -> 262144 bytes
.../Binary/D05/Drivers/SFC/SfcDxeDriver.inf | 29 +
.../Binary/D05/Drivers/Sas/SasDriverDxe.efi | Bin 0 -> 210400 bytes
.../Binary/D05/Drivers/Sas/SasDxeDriver.inf | 28 +
.../D05/Drivers/Sm750Dxe/SmiGraphicsOutput.efi | Bin 0 -> 35904 bytes
.../Binary/D05/Drivers/Sm750Dxe/UefiSmi.inf | 32 +
.../TransferSmbiosInfo/TransSmbiosInfo.depex | Bin 0 -> 2 bytes
.../Drivers/TransferSmbiosInfo/TransSmbiosInfo.efi | Bin 0 -> 16576 bytes
.../Drivers/TransferSmbiosInfo/TransSmbiosInfo.inf | 26 +
Platforms/Hisilicon/Binary/D05/Ebl/Ebl.efi | Bin 0 -> 141344 bytes
Platforms/Hisilicon/Binary/D05/Ebl/Ebl.inf | 32 +
.../D05/Library/FdtUpdateLib/FdtUpdateLib.inf | 51 +
.../D05/Library/FdtUpdateLib/FdtUpdateLib.lib | Bin 0 -> 108418 bytes
.../Library/OemAddressMapD05/OemAddressMapD05.inf | 44 +
.../Library/OemAddressMapD05/OemAddressMapD05.lib | Bin 0 -> 42136 bytes
.../Binary/D05/MemoryInitPei/MemoryInit.efi | Bin 0 -> 268416 bytes
.../Binary/D05/MemoryInitPei/MemoryInitPeim.inf | 33 +
Platforms/Hisilicon/Binary/D05/Sec/FVMAIN_SEC.Fv | Bin 0 -> 262144 bytes
Platforms/Hisilicon/Binary/D05/bl1.bin | Bin 0 -> 12296 bytes
Platforms/Hisilicon/Binary/D05/fip.bin | Bin 0 -> 41493 bytes
.../D02/Library/OemMiscLibD02/BoardFeatureD02.c | 8 +-
.../D02/Library/PlatformPciLib/PlatformPciLib.c | 32 +-
.../D02/Library/PlatformPciLib/PlatformPciLib.inf | 118 +-
Platforms/Hisilicon/D02/Pv660D02.dsc | 10 +-
Platforms/Hisilicon/D02/Pv660D02.fdf | 2 +-
Platforms/Hisilicon/D03/D03.dsc | 13 +-
Platforms/Hisilicon/D03/D03.fdf | 2 +-
.../Drivers/OemNicConfig2PHi1610/OemNicConfig2P.c | 17 +-
.../OemNicConfig2PHi1610/OemNicConfig2P.inf | 1 +
.../Library/OemMiscLib2P/BoardFeature2PHi1610.c | 6 +-
.../D03/Library/OemMiscLib2P/OemMiscLib2PHi1610.c | 9 +
.../D03/Library/PlatformPciLib/PlatformPciLib.c | 33 +-
.../D03/Library/PlatformPciLib/PlatformPciLib.inf | 118 +-
Platforms/Hisilicon/D05/D05.dsc | 672 +++++++++++
Platforms/Hisilicon/D05/D05.fdf | 354 ++++++
.../D05/EarlyConfigPeim/EarlyConfigPeimD05.c | 106 ++
.../D05/EarlyConfigPeim/EarlyConfigPeimD05.inf | 55 +
.../D05/Library/OemMiscLibD05/BoardFeatureD05.c | 226 ++++
.../OemMiscLibD05/BoardFeatureD05Strings.uni | 56 +
.../D05/Library/OemMiscLibD05/OemMiscLibD05.c | 135 +++
.../D05/Library/OemMiscLibD05/OemMiscLibD05.inf | 56 +
.../D05/Library/PlatformPciLib/PlatformPciLib.c | 270 +++++
.../D05/Library/PlatformPciLib/PlatformPciLib.inf | 183 +++
124 files changed, 9016 insertions(+), 259 deletions(-)
create mode 100644 Chips/Hisilicon/Binary/Hi1616/Library/Hi1616Serdes/Hi1616SerdesLib.inf
create mode 100644 Chips/Hisilicon/Binary/Hi1616/Library/Hi1616Serdes/Hi1616SerdesLib.lib
create mode 100644 Chips/Hisilicon/Binary/Hi1616/Library/PlatformSysCtrlLibHi1616/PlatformSysCtrlLibHi1616.inf
create mode 100644 Chips/Hisilicon/Binary/Hi1616/Library/PlatformSysCtrlLibHi1616/PlatformSysCtrlLibHi1616.lib
create mode 100644 Chips/Hisilicon/Drivers/HisiAcpiPlatformDxe/AcpiPlatform.c
create mode 100644 Chips/Hisilicon/Drivers/HisiAcpiPlatformDxe/AcpiPlatform.uni
create mode 100644 Chips/Hisilicon/Drivers/HisiAcpiPlatformDxe/AcpiPlatformDxe.inf
create mode 100644 Chips/Hisilicon/Drivers/HisiAcpiPlatformDxe/AcpiPlatformExtra.uni
create mode 100644 Chips/Hisilicon/Drivers/HisiAcpiPlatformDxe/UpdateAcpiTable.c
mode change 100755 => 100644 Chips/Hisilicon/Hi1610/Drivers/PcieInit1610/PcieInitLib.c
create mode 100644 Chips/Hisilicon/Hi1616/D05AcpiTables/AcpiTablesHi1616.inf
create mode 100644 Chips/Hisilicon/Hi1616/D05AcpiTables/D05Iort.asl
create mode 100644 Chips/Hisilicon/Hi1616/D05AcpiTables/D05Mcfg.aslc
create mode 100644 Chips/Hisilicon/Hi1616/D05AcpiTables/D05Slit.aslc
create mode 100644 Chips/Hisilicon/Hi1616/D05AcpiTables/D05Srat.aslc
create mode 100644 Chips/Hisilicon/Hi1616/D05AcpiTables/Dsdt/CPU.asl
create mode 100644 Chips/Hisilicon/Hi1616/D05AcpiTables/Dsdt/Com.asl
create mode 100644 Chips/Hisilicon/Hi1616/D05AcpiTables/Dsdt/D05Hns.asl
create mode 100644 Chips/Hisilicon/Hi1616/D05AcpiTables/Dsdt/D05I2c.asl
create mode 100644 Chips/Hisilicon/Hi1616/D05AcpiTables/Dsdt/D05Mbig.asl
create mode 100644 Chips/Hisilicon/Hi1616/D05AcpiTables/Dsdt/D05Pci.asl
create mode 100644 Chips/Hisilicon/Hi1616/D05AcpiTables/Dsdt/D05Sas.asl
create mode 100644 Chips/Hisilicon/Hi1616/D05AcpiTables/Dsdt/D05Usb.asl
create mode 100644 Chips/Hisilicon/Hi1616/D05AcpiTables/Dsdt/DsdtHi1616.asl
create mode 100644 Chips/Hisilicon/Hi1616/D05AcpiTables/Dsdt/Lpc.asl
create mode 100644 Chips/Hisilicon/Hi1616/D05AcpiTables/Facs.aslc
create mode 100644 Chips/Hisilicon/Hi1616/D05AcpiTables/Fadt.aslc
create mode 100644 Chips/Hisilicon/Hi1616/D05AcpiTables/Gtdt.aslc
create mode 100644 Chips/Hisilicon/Hi1616/D05AcpiTables/Hi1616Platform.h
create mode 100644 Chips/Hisilicon/Hi1616/D05AcpiTables/MadtHi1616.aslc
create mode 100644 Chips/Hisilicon/Hi1616/Include/Library/SerdesLib.h
create mode 100644 Platforms/Hisilicon/Binary/D05/Drivers/GetInfoFromBmc/GetInfoFromBmc.depex
create mode 100644 Platforms/Hisilicon/Binary/D05/Drivers/GetInfoFromBmc/GetInfoFromBmc.efi
create mode 100644 Platforms/Hisilicon/Binary/D05/Drivers/GetInfoFromBmc/GetInfoFromBmc.inf
create mode 100644 Platforms/Hisilicon/Binary/D05/Drivers/Ipmi/IpmiInterfaceDxe/IpmiInterfaceDxe.depex
create mode 100644 Platforms/Hisilicon/Binary/D05/Drivers/Ipmi/IpmiInterfaceDxe/IpmiInterfaceDxe.efi
create mode 100644 Platforms/Hisilicon/Binary/D05/Drivers/Ipmi/IpmiInterfaceDxe/IpmiInterfaceDxe.inf
create mode 100644 Platforms/Hisilicon/Binary/D05/Drivers/Ipmi/IpmiInterfacePei/IpmiInterfacePei.efi
create mode 100644 Platforms/Hisilicon/Binary/D05/Drivers/Ipmi/IpmiInterfacePei/IpmiInterfacePei.inf
create mode 100644 Platforms/Hisilicon/Binary/D05/Drivers/IpmiMiscOpDxe/IpmiMiscOp.efi
create mode 100644 Platforms/Hisilicon/Binary/D05/Drivers/IpmiMiscOpDxe/IpmiMiscOpDxe.depex
create mode 100644 Platforms/Hisilicon/Binary/D05/Drivers/IpmiMiscOpDxe/IpmiMiscOpDxe.inf
create mode 100644 Platforms/Hisilicon/Binary/D05/Drivers/IpmiWatchdogDxe/IpmiWatchdogDxe.depex
create mode 100644 Platforms/Hisilicon/Binary/D05/Drivers/IpmiWatchdogDxe/IpmiWatchdogDxe.efi
create mode 100644 Platforms/Hisilicon/Binary/D05/Drivers/IpmiWatchdogDxe/IpmiWatchdogDxe.inf
create mode 100644 Platforms/Hisilicon/Binary/D05/Drivers/Net/SnpPV660DxeMac0/SnpPV600DxeMac0.efi
create mode 100644 Platforms/Hisilicon/Binary/D05/Drivers/Net/SnpPV660DxeMac0/SnpPV600DxeMac0.inf
create mode 100644 Platforms/Hisilicon/Binary/D05/Drivers/Net/SnpPV660DxeMac1/SnpPV600DxeMac1.efi
create mode 100644 Platforms/Hisilicon/Binary/D05/Drivers/Net/SnpPV660DxeMac1/SnpPV600DxeMac1.inf
create mode 100644 Platforms/Hisilicon/Binary/D05/Drivers/Net/SnpPV660DxeMac4/SnpPV600DxeMac4.efi
create mode 100644 Platforms/Hisilicon/Binary/D05/Drivers/Net/SnpPV660DxeMac4/SnpPV600DxeMac4.inf
create mode 100644 Platforms/Hisilicon/Binary/D05/Drivers/Net/SnpPV660DxeMac5/SnpPV600DxeMac5.efi
create mode 100644 Platforms/Hisilicon/Binary/D05/Drivers/Net/SnpPV660DxeMac5/SnpPV600DxeMac5.inf
create mode 100644 Platforms/Hisilicon/Binary/D05/Drivers/OhciDxe/NativeOhci.efi
create mode 100644 Platforms/Hisilicon/Binary/D05/Drivers/OhciDxe/OhciDxe.inf
create mode 100644 Platforms/Hisilicon/Binary/D05/Drivers/ReportPciePlugDidVidToBmc/ReportPciePlugDidVidToBmc.depex
create mode 100644 Platforms/Hisilicon/Binary/D05/Drivers/ReportPciePlugDidVidToBmc/ReportPciePlugDidVidToBmc.efi
create mode 100644 Platforms/Hisilicon/Binary/D05/Drivers/ReportPciePlugDidVidToBmc/ReportPciePlugDidVidToBmc.inf
create mode 100644 Platforms/Hisilicon/Binary/D05/Drivers/SFC/SFCDriver.depex
create mode 100644 Platforms/Hisilicon/Binary/D05/Drivers/SFC/SFCDriver.efi
create mode 100644 Platforms/Hisilicon/Binary/D05/Drivers/SFC/SfcDxeDriver.inf
create mode 100644 Platforms/Hisilicon/Binary/D05/Drivers/Sas/SasDriverDxe.efi
create mode 100644 Platforms/Hisilicon/Binary/D05/Drivers/Sas/SasDxeDriver.inf
create mode 100644 Platforms/Hisilicon/Binary/D05/Drivers/Sm750Dxe/SmiGraphicsOutput.efi
create mode 100644 Platforms/Hisilicon/Binary/D05/Drivers/Sm750Dxe/UefiSmi.inf
create mode 100644 Platforms/Hisilicon/Binary/D05/Drivers/TransferSmbiosInfo/TransSmbiosInfo.depex
create mode 100644 Platforms/Hisilicon/Binary/D05/Drivers/TransferSmbiosInfo/TransSmbiosInfo.efi
create mode 100644 Platforms/Hisilicon/Binary/D05/Drivers/TransferSmbiosInfo/TransSmbiosInfo.inf
create mode 100644 Platforms/Hisilicon/Binary/D05/Ebl/Ebl.efi
create mode 100644 Platforms/Hisilicon/Binary/D05/Ebl/Ebl.inf
create mode 100644 Platforms/Hisilicon/Binary/D05/Library/FdtUpdateLib/FdtUpdateLib.inf
create mode 100644 Platforms/Hisilicon/Binary/D05/Library/FdtUpdateLib/FdtUpdateLib.lib
create mode 100644 Platforms/Hisilicon/Binary/D05/Library/OemAddressMapD05/OemAddressMapD05.inf
create mode 100644 Platforms/Hisilicon/Binary/D05/Library/OemAddressMapD05/OemAddressMapD05.lib
create mode 100644 Platforms/Hisilicon/Binary/D05/MemoryInitPei/MemoryInit.efi
create mode 100644 Platforms/Hisilicon/Binary/D05/MemoryInitPei/MemoryInitPeim.inf
create mode 100644 Platforms/Hisilicon/Binary/D05/Sec/FVMAIN_SEC.Fv
create mode 100644 Platforms/Hisilicon/Binary/D05/bl1.bin
create mode 100644 Platforms/Hisilicon/Binary/D05/fip.bin
create mode 100644 Platforms/Hisilicon/D05/D05.dsc
create mode 100644 Platforms/Hisilicon/D05/D05.fdf
create mode 100644 Platforms/Hisilicon/D05/EarlyConfigPeim/EarlyConfigPeimD05.c
create mode 100644 Platforms/Hisilicon/D05/EarlyConfigPeim/EarlyConfigPeimD05.inf
create mode 100644 Platforms/Hisilicon/D05/Library/OemMiscLibD05/BoardFeatureD05.c
create mode 100644 Platforms/Hisilicon/D05/Library/OemMiscLibD05/BoardFeatureD05Strings.uni
create mode 100644 Platforms/Hisilicon/D05/Library/OemMiscLibD05/OemMiscLibD05.c
create mode 100644 Platforms/Hisilicon/D05/Library/OemMiscLibD05/OemMiscLibD05.inf
create mode 100644 Platforms/Hisilicon/D05/Library/PlatformPciLib/PlatformPciLib.c
create mode 100644 Platforms/Hisilicon/D05/Library/PlatformPciLib/PlatformPciLib.inf
--
1.9.1
9 years
- 2
- 57
[PATCH] Platforms/RaspberryPi: add barebones support for Raspberry Pi 3
by Ard Biesheuvel
This adds minimal support for the Raspberry Pi model 3, running either
in ARM or in AARCH64 mode.
NOTE: UEFI does not support being executed from EL3, so currently, this
code was only tested with the ATF/OP-TEE port loaded from U-boot (!)
TODO:
* SDHCI support currently non-working, this may require copying the
generic SD/MMC driver and applying some quirks
* port the Synopsys DW otg driver from HiKey
* invent a way to get non-volatile storage working
* implement reset via BCM2835 watchdog
* wire up the random number generator for KASLR and early entropy pool seeding
in Linux
* wire up the VC-1 to the GOP protocol.
* add support for onboard ethernet
Contributed-under: TianoCore Contribution Agreement 1.0
Signed-off-by: Ard Biesheuvel <ard.biesheuvel(a)linaro.org>
---
This currently depends on this EDK2 branch to build:
https://git.linaro.org/people/ard.biesheuvel/uefi-next.git/log/?h=non-disco…
The resulting RPI_EFI.fd image can be booted as if it were a kernel image, as
long as we are already running at EL2 or lower.
Platforms/RaspberryPi/Drivers/Bcm2836InterruptDxe/Bcm2836InterruptDxe.c | 336 ++++++++++
Platforms/RaspberryPi/Drivers/Bcm2836InterruptDxe/Bcm2836InterruptDxe.inf | 47 ++
Platforms/RaspberryPi/Drivers/RaspberryPiPlatformDxe/RaspberryPiPlatformDxe.c | 43 ++
Platforms/RaspberryPi/Drivers/RaspberryPiPlatformDxe/RaspberryPiPlatformDxe.inf | 36 ++
Platforms/RaspberryPi/Library/RaspberryPiPlatformLib/AARCH64/RaspberryPiHelper.S | 119 ++++
Platforms/RaspberryPi/Library/RaspberryPiPlatformLib/ARM/RaspberryPiHelper.S | 114 ++++
Platforms/RaspberryPi/Library/RaspberryPiPlatformLib/ARM/VirtHelper.S | 57 ++
Platforms/RaspberryPi/Library/RaspberryPiPlatformLib/ARM/VirtHelper.asm | 71 ++
Platforms/RaspberryPi/Library/RaspberryPiPlatformLib/FdtParser.c | 90 +++
Platforms/RaspberryPi/Library/RaspberryPiPlatformLib/RaspberryPi.c | 71 ++
Platforms/RaspberryPi/Library/RaspberryPiPlatformLib/RaspberryPiMem.c | 54 ++
Platforms/RaspberryPi/Library/RaspberryPiPlatformLib/RaspberryPiPlatformLib.inf | 65 ++
Platforms/RaspberryPi/Library/RaspberryPiPlatformPeiLib/RaspberryPiPlatformPeiLib.c | 56 ++
Platforms/RaspberryPi/Library/RaspberryPiPlatformPeiLib/RaspberryPiPlatformPeiLib.inf | 51 ++
Platforms/RaspberryPi/Library/RaspberryPiResetSystemLib/RaspberryPiResetSystemLib.c | 86 +++
Platforms/RaspberryPi/Library/RaspberryPiResetSystemLib/RaspberryPiResetSystemLib.inf | 31 +
Platforms/RaspberryPi/RaspberryPi.dsc | 684 ++++++++++++++++++++
Platforms/RaspberryPi/RaspberryPi.fdf | 365 +++++++++++
18 files changed, 2376 insertions(+)
diff --git a/Platforms/RaspberryPi/Drivers/Bcm2836InterruptDxe/Bcm2836InterruptDxe.c b/Platforms/RaspberryPi/Drivers/Bcm2836InterruptDxe/Bcm2836InterruptDxe.c
new file mode 100644
index 000000000000..75a01d1d2c9a
--- /dev/null
+++ b/Platforms/RaspberryPi/Drivers/Bcm2836InterruptDxe/Bcm2836InterruptDxe.c
@@ -0,0 +1,336 @@
+/** @file
+ Copyright (c) 2016, Linaro, Ltd. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+#include <PiDxe.h>
+
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/BaseMemoryLib.h>
+#include <Library/UefiBootServicesTableLib.h>
+#include <Library/UefiLib.h>
+#include <Library/PcdLib.h>
+#include <Library/IoLib.h>
+
+#include <Protocol/Cpu.h>
+#include <Protocol/HardwareInterrupt.h>
+
+//
+// This currently only implements support for the architected timer interrupts
+// on the per-CPU interrupt controllers.
+//
+#define NUM_IRQS (4)
+
+#define TIMER_CONTROL_OFFSET 0x40
+#define TIMER_PENDING_OFFSET 0x60
+
+#ifdef MDE_CPU_AARCH64
+#define ARM_ARCH_EXCEPTION_IRQ EXCEPT_AARCH64_IRQ
+#else
+#define ARM_ARCH_EXCEPTION_IRQ EXCEPT_ARM_IRQ
+#endif
+
+STATIC CONST
+EFI_PHYSICAL_ADDRESS RegBase = FixedPcdGet32 (PcdInterruptBaseAddress);
+
+//
+// Notifications
+//
+EFI_EVENT EfiExitBootServicesEvent = (EFI_EVENT)NULL;
+
+STATIC
+HARDWARE_INTERRUPT_HANDLER gRegisteredInterruptHandlers[NUM_IRQS];
+
+/**
+ Shutdown our hardware
+
+ DXE Core will disable interrupts and turn off the timer and disable interrupts
+ after all the event handlers have run.
+
+ @param[in] Event The Event that is being processed
+ @param[in] Context Event Context
+**/
+STATIC
+VOID
+EFIAPI
+ExitBootServicesEvent (
+ IN EFI_EVENT Event,
+ IN VOID *Context
+ )
+{
+ // Disable all interrupts
+}
+
+/**
+ Register Handler for the specified interrupt source.
+
+ @param This Instance pointer for this protocol
+ @param Source Hardware source of the interrupt
+ @param Handler Callback for interrupt. NULL to unregister
+
+ @retval EFI_SUCCESS Source was updated to support Handler.
+ @retval EFI_DEVICE_ERROR Hardware could not be programmed.
+
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+RegisterInterruptSource (
+ IN EFI_HARDWARE_INTERRUPT_PROTOCOL *This,
+ IN HARDWARE_INTERRUPT_SOURCE Source,
+ IN HARDWARE_INTERRUPT_HANDLER Handler
+ )
+{
+ if (Source >= NUM_IRQS) {
+ ASSERT (FALSE);
+ return EFI_UNSUPPORTED;
+ }
+
+ if ((Handler == NULL) && (gRegisteredInterruptHandlers[Source] == NULL)) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if ((Handler != NULL) && (gRegisteredInterruptHandlers[Source] != NULL)) {
+ return EFI_ALREADY_STARTED;
+ }
+
+ gRegisteredInterruptHandlers[Source] = Handler;
+ return This->EnableInterruptSource(This, Source);
+}
+
+
+/**
+ Enable interrupt source Source.
+
+ @param This Instance pointer for this protocol
+ @param Source Hardware source of the interrupt
+
+ @retval EFI_SUCCESS Source interrupt enabled.
+ @retval EFI_DEVICE_ERROR Hardware could not be programmed.
+
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+EnableInterruptSource (
+ IN EFI_HARDWARE_INTERRUPT_PROTOCOL *This,
+ IN HARDWARE_INTERRUPT_SOURCE Source
+ )
+{
+ if (Source >= NUM_IRQS) {
+ ASSERT(FALSE);
+ return EFI_UNSUPPORTED;
+ }
+
+ MmioOr32 (RegBase + TIMER_CONTROL_OFFSET, 1 << Source);
+
+ return EFI_SUCCESS;
+}
+
+
+/**
+ Disable interrupt source Source.
+
+ @param This Instance pointer for this protocol
+ @param Source Hardware source of the interrupt
+
+ @retval EFI_SUCCESS Source interrupt disabled.
+ @retval EFI_DEVICE_ERROR Hardware could not be programmed.
+
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+DisableInterruptSource (
+ IN EFI_HARDWARE_INTERRUPT_PROTOCOL *This,
+ IN HARDWARE_INTERRUPT_SOURCE Source
+ )
+{
+ if (Source >= NUM_IRQS) {
+ ASSERT(FALSE);
+ return EFI_UNSUPPORTED;
+ }
+
+ MmioAnd32 (RegBase + TIMER_CONTROL_OFFSET, ~(1 << Source));
+
+ return EFI_SUCCESS;
+}
+
+
+
+/**
+ Return current state of interrupt source Source.
+
+ @param This Instance pointer for this protocol
+ @param Source Hardware source of the interrupt
+ @param InterruptState TRUE: source enabled, FALSE: source disabled.
+
+ @retval EFI_SUCCESS InterruptState is valid
+ @retval EFI_DEVICE_ERROR InterruptState is not valid
+
+**/
+EFI_STATUS
+EFIAPI
+GetInterruptSourceState (
+ IN EFI_HARDWARE_INTERRUPT_PROTOCOL *This,
+ IN HARDWARE_INTERRUPT_SOURCE Source,
+ IN BOOLEAN *InterruptState
+ )
+{
+ if (InterruptState == NULL) {
+ return EFI_INVALID_PARAMETER;
+ }
+
+ if (Source >= NUM_IRQS) {
+ ASSERT(FALSE);
+ return EFI_UNSUPPORTED;
+ }
+
+ *InterruptState = MmioRead32 (RegBase + TIMER_CONTROL_OFFSET) &
+ (1 << Source);
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Signal to the hardware that the End Of Intrrupt state
+ has been reached.
+
+ @param This Instance pointer for this protocol
+ @param Source Hardware source of the interrupt
+
+ @retval EFI_SUCCESS Source interrupt EOI'ed.
+ @retval EFI_DEVICE_ERROR Hardware could not be programmed.
+
+**/
+STATIC
+EFI_STATUS
+EFIAPI
+EndOfInterrupt (
+ IN EFI_HARDWARE_INTERRUPT_PROTOCOL *This,
+ IN HARDWARE_INTERRUPT_SOURCE Source
+ )
+{
+ return EFI_SUCCESS;
+}
+
+
+/**
+ EFI_CPU_INTERRUPT_HANDLER that is called when a processor interrupt occurs.
+
+ @param InterruptType Defines the type of interrupt or exception that
+ occurred on the processor.This parameter is processor
+ architecture specific.
+ @param SystemContext A pointer to the processor context when
+ the interrupt occurred on the processor.
+
+ @return None
+
+**/
+STATIC
+VOID
+EFIAPI
+IrqInterruptHandler (
+ IN EFI_EXCEPTION_TYPE InterruptType,
+ IN EFI_SYSTEM_CONTEXT SystemContext
+ )
+{
+ HARDWARE_INTERRUPT_HANDLER InterruptHandler;
+ HARDWARE_INTERRUPT_SOURCE Source;
+
+ Source = 0;
+ switch (MmioRead32 (RegBase + TIMER_PENDING_OFFSET) & ((1 << NUM_IRQS) - 1)) {
+ case 0x8 ... 0xf:
+ Source++;
+ case 0x4 ... 0x7:
+ Source++;
+ case 0x2 ... 0x3:
+ Source++;
+ case 0x1:
+ break;
+ default:
+ // spurious interrupt?
+ return;
+ }
+
+ InterruptHandler = gRegisteredInterruptHandlers [Source];
+ if (InterruptHandler != NULL) {
+ // Call the registered interrupt handler.
+ InterruptHandler (Source, SystemContext);
+ }
+}
+
+//
+// The protocol instance produced by this driver
+//
+STATIC EFI_HARDWARE_INTERRUPT_PROTOCOL gHardwareInterruptProtocol = {
+ RegisterInterruptSource,
+ EnableInterruptSource,
+ DisableInterruptSource,
+ GetInterruptSourceState,
+ EndOfInterrupt
+};
+
+/**
+ Initialize the state information for the CPU Architectural Protocol
+
+ @param ImageHandle of the loaded driver
+ @param SystemTable Pointer to the System Table
+
+ @retval EFI_SUCCESS Protocol registered
+ @retval EFI_OUT_OF_RESOURCES Cannot allocate protocol data structure
+ @retval EFI_DEVICE_ERROR Hardware problems
+
+**/
+EFI_STATUS
+InterruptDxeInitialize (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_CPU_ARCH_PROTOCOL *Cpu;
+ EFI_STATUS Status;
+
+ // Make sure the Interrupt Controller Protocol is not already installed in the system.
+ ASSERT_PROTOCOL_ALREADY_INSTALLED (NULL, &gHardwareInterruptProtocolGuid);
+
+ //
+ // Get the CPU protocol that this driver requires.
+ //
+ Status = gBS->LocateProtocol(&gEfiCpuArchProtocolGuid, NULL, (VOID **)&Cpu);
+ ASSERT_EFI_ERROR(Status);
+
+ //
+ // Unregister the default exception handler.
+ //
+ Status = Cpu->RegisterInterruptHandler(Cpu, ARM_ARCH_EXCEPTION_IRQ, NULL);
+ ASSERT_EFI_ERROR(Status);
+
+ //
+ // Register to receive interrupts
+ //
+ Status = Cpu->RegisterInterruptHandler(Cpu, ARM_ARCH_EXCEPTION_IRQ,
+ IrqInterruptHandler);
+ ASSERT_EFI_ERROR(Status);
+
+ Status = gBS->InstallMultipleProtocolInterfaces(
+ &ImageHandle,
+ &gHardwareInterruptProtocolGuid, &gHardwareInterruptProtocol,
+ NULL);
+ ASSERT_EFI_ERROR(Status);
+
+ // Register for an ExitBootServicesEvent
+ Status = gBS->CreateEvent(EVT_SIGNAL_EXIT_BOOT_SERVICES, TPL_NOTIFY,
+ ExitBootServicesEvent, NULL, &EfiExitBootServicesEvent);
+ ASSERT_EFI_ERROR(Status);
+
+ return Status;
+}
diff --git a/Platforms/RaspberryPi/Drivers/Bcm2836InterruptDxe/Bcm2836InterruptDxe.inf b/Platforms/RaspberryPi/Drivers/Bcm2836InterruptDxe/Bcm2836InterruptDxe.inf
new file mode 100644
index 000000000000..cf64c09b2e71
--- /dev/null
+++ b/Platforms/RaspberryPi/Drivers/Bcm2836InterruptDxe/Bcm2836InterruptDxe.inf
@@ -0,0 +1,47 @@
+#/** @file
+# Copyright (c) 2016, Linaro, Ltd. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#**/
+
+[Defines]
+ INF_VERSION = 0x00010019
+ BASE_NAME = Bcm2836InterruptDxe
+ FILE_GUID = 3944f2d7-2e09-4fc0-9e98-008375641453
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = InterruptDxeInitialize
+
+[Sources]
+ Bcm2836InterruptDxe.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+ EmbeddedPkg/EmbeddedPkg.dec
+
+[LibraryClasses]
+ BaseLib
+ UefiLib
+ UefiBootServicesTableLib
+ DebugLib
+ PrintLib
+ UefiDriverEntryPoint
+ IoLib
+ ArmLib
+
+[Protocols]
+ gHardwareInterruptProtocolGuid
+ gEfiCpuArchProtocolGuid
+
+[FixedPcd]
+ gEmbeddedTokenSpaceGuid.PcdInterruptBaseAddress
+
+[Depex]
+ gEfiCpuArchProtocolGuid
diff --git a/Platforms/RaspberryPi/Drivers/RaspberryPiPlatformDxe/RaspberryPiPlatformDxe.c b/Platforms/RaspberryPi/Drivers/RaspberryPiPlatformDxe/RaspberryPiPlatformDxe.c
new file mode 100644
index 000000000000..45edc5bbfa47
--- /dev/null
+++ b/Platforms/RaspberryPi/Drivers/RaspberryPiPlatformDxe/RaspberryPiPlatformDxe.c
@@ -0,0 +1,43 @@
+/** @file
+ Copyright (c) 2016, Linaro, Ltd. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+#include <PiDxe.h>
+
+#include <Library/BaseLib.h>
+#include <Library/DebugLib.h>
+#include <Library/NonDiscoverableDeviceRegistrationLib.h>
+
+STATIC CONST EFI_PHYSICAL_ADDRESS SdhciBaseAddress = 0x3f202000;
+
+/**
+ @param ImageHandle of the loaded driver
+ @param SystemTable Pointer to the System Table
+
+ @retval EFI_SUCCESS Protocol registered
+ @retval EFI_OUT_OF_RESOURCES Cannot allocate protocol data structure
+ @retval EFI_DEVICE_ERROR Hardware problems
+
+**/
+EFI_STATUS
+EFIAPI
+RaspberryPiPlatformDxeInitialize (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ return RegisterNonDiscoverableDevice (
+ SdhciBaseAddress,
+ NonDiscoverableDeviceTypeSdhci,
+ NonDiscoverableDeviceDmaTypeNonCoherent,
+ NULL,
+ NULL);
+}
diff --git a/Platforms/RaspberryPi/Drivers/RaspberryPiPlatformDxe/RaspberryPiPlatformDxe.inf b/Platforms/RaspberryPi/Drivers/RaspberryPiPlatformDxe/RaspberryPiPlatformDxe.inf
new file mode 100644
index 000000000000..b3e1f5e69cb8
--- /dev/null
+++ b/Platforms/RaspberryPi/Drivers/RaspberryPiPlatformDxe/RaspberryPiPlatformDxe.inf
@@ -0,0 +1,36 @@
+#/** @file
+# Copyright (c) 2016, Linaro, Ltd. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#**/
+
+[Defines]
+ INF_VERSION = 0x00010019
+ BASE_NAME = RaspberryPiPlatformDxe
+ FILE_GUID = 1ca34ecc-9cb0-4cf4-99c7-2065966f97bf
+ MODULE_TYPE = DXE_DRIVER
+ VERSION_STRING = 1.0
+ ENTRY_POINT = RaspberryPiPlatformDxeInitialize
+
+[Sources]
+ RaspberryPiPlatformDxe.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+
+[LibraryClasses]
+ BaseLib
+ DebugLib
+ NonDiscoverableDeviceRegistrationLib
+ UefiDriverEntryPoint
+
+[Depex]
+ TRUE
diff --git a/Platforms/RaspberryPi/Library/RaspberryPiPlatformLib/AARCH64/RaspberryPiHelper.S b/Platforms/RaspberryPi/Library/RaspberryPiPlatformLib/AARCH64/RaspberryPiHelper.S
new file mode 100644
index 000000000000..efae2bc588e9
--- /dev/null
+++ b/Platforms/RaspberryPi/Library/RaspberryPiPlatformLib/AARCH64/RaspberryPiHelper.S
@@ -0,0 +1,119 @@
+#
+# Copyright (c) 2011-2013, ARM Limited. All rights reserved.
+# Copyright (c) 2016, Linaro Limited. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#
+
+#include <AsmMacroIoLibV8.h>
+#include <Library/ArmLib.h>
+
+// VOID
+// ArmPlatformPeiBootAction (
+// VOID *DeviceTreeBaseAddress, // passed by loader in x0
+// VOID *ImageBase // passed by FDF trampoline in x1
+// );
+ASM_FUNC(ArmPlatformPeiBootAction)
+ //
+ // If we are booting from RAM using the Linux kernel boot protocol, x0 will
+ // point to the DTB image in memory. Otherwise, use the default value defined
+ // by the platform.
+ //
+ cbnz x0, 0f
+ ldr x0, PcdGet64 (PcdDeviceTreeInitialBaseAddress)
+
+0:mov x29, x30 // preserve LR
+ mov x28, x0 // preserve DTB pointer
+ mov x27, x1 // preserve base of image pointer
+
+ //
+ // The base of the runtime image has been preserved in x1. Check whether
+ // the expected magic number can be found in the header.
+ //
+ ldr w8, .LArm64LinuxMagic
+ ldr w9, [x1, #0x38]
+ cmp w8, w9
+ bne .Lout
+
+ //
+ //
+ // OK, so far so good. We have confirmed that we likely have a DTB and are
+ // booting via the arm64 Linux boot protocol. Update the base-of-image PCD
+ // to the actual relocated value, and add the shift of PcdFdBaseAddress to
+ // PcdFvBaseAddress as well
+ //
+ adr x8, PcdGet64 (PcdFdBaseAddress)
+ adr x9, PcdGet64 (PcdFvBaseAddress)
+ ldr x6, [x8]
+ ldr x7, [x9]
+ sub x7, x7, x6
+ add x7, x7, x1
+ str x1, [x8]
+ str x7, [x9]
+
+ //
+ // Discover the memory size and offset from the DTB, and record in the
+ // respective PCDs. This will also return false if a corrupt DTB is
+ // encountered. Since we are calling a C function, use the window at the
+ // beginning of the FD image as a temp stack.
+ //
+ adr x1, PcdGet64 (PcdSystemMemoryBase)
+ adr x2, PcdGet64 (PcdSystemMemorySize)
+ mov sp, x7
+ bl FindMemnode
+ cbz x0, .Lout
+
+ //
+ // Copy the DTB to the slack space right after the 64 byte arm64/Linux style
+ // image header at the base of this image (defined in the FDF), and record the
+ // pointer in PcdDeviceTreeInitialBaseAddress.
+ //
+ adr x8, PcdGet64 (PcdDeviceTreeInitialBaseAddress)
+ add x27, x27, #0x40
+ str x27, [x8]
+
+ mov x0, x27
+ mov x1, x28
+ bl CopyFdt
+
+.Lout:
+ ret x29
+
+.LArm64LinuxMagic:
+ .byte 0x41, 0x52, 0x4d, 0x64
+
+//UINTN
+//ArmPlatformGetPrimaryCoreMpId (
+// VOID
+// );
+ASM_FUNC(ArmPlatformGetPrimaryCoreMpId)
+ MOV32 (w0, FixedPcdGet32 (PcdArmPrimaryCore))
+ ret
+
+//UINTN
+//ArmPlatformIsPrimaryCore (
+// IN UINTN MpId
+// );
+ASM_FUNC(ArmPlatformIsPrimaryCore)
+ mov x0, #1
+ ret
+
+//UINTN
+//ArmPlatformGetCorePosition (
+// IN UINTN MpId
+// );
+// With this function: CorePos = (ClusterId * 4) + CoreId
+ASM_FUNC(ArmPlatformGetCorePosition)
+ and x1, x0, #ARM_CORE_MASK
+ and x0, x0, #ARM_CLUSTER_MASK
+ add x0, x1, x0, LSR #6
+ ret
+
+ASM_FUNCTION_REMOVE_IF_UNREFERENCED
diff --git a/Platforms/RaspberryPi/Library/RaspberryPiPlatformLib/ARM/RaspberryPiHelper.S b/Platforms/RaspberryPi/Library/RaspberryPiPlatformLib/ARM/RaspberryPiHelper.S
new file mode 100644
index 000000000000..42ea88e69eee
--- /dev/null
+++ b/Platforms/RaspberryPi/Library/RaspberryPiPlatformLib/ARM/RaspberryPiHelper.S
@@ -0,0 +1,114 @@
+#
+# Copyright (c) 2011-2013, ARM Limited. All rights reserved.
+# Copyright (c) 2014-2016, Linaro Limited. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#
+
+#include <AsmMacroIoLib.h>
+#include <Library/ArmLib.h>
+
+ASM_FUNC(ArmPlatformPeiBootAction)
+ //
+ // If we are booting from RAM using the Linux kernel boot protocol, r0 will
+ // point to the DTB image in memory. Otherwise, use the default value defined
+ // by the platform.
+ //
+ teq r0, #0
+ bne 0f
+ LDRL (r0, PcdGet64 (PcdDeviceTreeInitialBaseAddress))
+
+0:mov r11, r14 // preserve LR
+ mov r10, r0 // preserve DTB pointer
+ mov r9, r1 // preserve base of image pointer
+
+ //
+ // The base of the runtime image has been preserved in r1. Check whether
+ // the expected magic number can be found in the header.
+ //
+ ldr r8, .LArm32LinuxMagic
+ ldr r7, [r1, #0x24]
+ cmp r7, r8
+ bne .Lout
+
+ //
+ //
+ // OK, so far so good. We have confirmed that we likely have a DTB and are
+ // booting via the ARM Linux boot protocol. Update the base-of-image PCD
+ // to the actual relocated value, and add the shift of PcdFdBaseAddress to
+ // PcdFvBaseAddress as well
+ //
+ ADRL (r8, PcdGet64 (PcdFdBaseAddress))
+ ADRL (r7, PcdGet64 (PcdFvBaseAddress))
+ ldr r6, [r8]
+ ldr r5, [r7]
+ sub r5, r5, r6
+ add r5, r5, r1
+ str r1, [r8]
+ str r5, [r7]
+
+ //
+ // Discover the memory size and offset from the DTB, and record in the
+ // respective PCDs. This will also return false if a corrupt DTB is
+ // encountered. Since we are calling a C function, use the window at the
+ // beginning of the FD image as a temp stack.
+ //
+ ADRL (r1, PcdGet64 (PcdSystemMemoryBase))
+ ADRL (r2, PcdGet64 (PcdSystemMemorySize))
+ mov sp, r5
+ bl FindMemnode
+ teq r0, #0
+ beq .Lout
+
+ //
+ // Copy the DTB to the slack space right after the 64 byte arm64/Linux style
+ // image header at the base of this image (defined in the FDF), and record the
+ // pointer in PcdDeviceTreeInitialBaseAddress.
+ //
+ ADRL (r8, PcdGet64 (PcdDeviceTreeInitialBaseAddress))
+ add r9, r9, #0x40
+ str r9, [r8]
+
+ mov r0, r9
+ mov r1, r10
+ bl CopyFdt
+
+.Lout:
+ bx r11
+
+.LArm32LinuxMagic:
+ .byte 0x18, 0x28, 0x6f, 0x01
+
+//UINTN
+//ArmPlatformGetPrimaryCoreMpId (
+// VOID
+// );
+ASM_FUNC(ArmPlatformGetPrimaryCoreMpId)
+ MOV32 (r0, FixedPcdGet32 (PcdArmPrimaryCore))
+ bx lr
+
+//UINTN
+//ArmPlatformIsPrimaryCore (
+// IN UINTN MpId
+// );
+ASM_FUNC(ArmPlatformIsPrimaryCore)
+ mov r0, #1
+ bx lr
+
+//UINTN
+//ArmPlatformGetCorePosition (
+// IN UINTN MpId
+// );
+// With this function: CorePos = (ClusterId * 4) + CoreId
+ASM_FUNC(ArmPlatformGetCorePosition)
+ and r1, r0, #ARM_CORE_MASK
+ and r0, r0, #ARM_CLUSTER_MASK
+ add r0, r1, r0, LSR #6
+ bx lr
diff --git a/Platforms/RaspberryPi/Library/RaspberryPiPlatformLib/ARM/VirtHelper.S b/Platforms/RaspberryPi/Library/RaspberryPiPlatformLib/ARM/VirtHelper.S
new file mode 100644
index 000000000000..4a4db3721072
--- /dev/null
+++ b/Platforms/RaspberryPi/Library/RaspberryPiPlatformLib/ARM/VirtHelper.S
@@ -0,0 +1,57 @@
+#
+# Copyright (c) 2011-2013, ARM Limited. All rights reserved.
+# Copyright (c) 2014-2016, Linaro Limited. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#
+
+#include <AsmMacroIoLib.h>
+#include <Library/ArmLib.h>
+
+ASM_FUNC(ArmPlatformPeiBootAction)
+ bx lr
+
+//UINTN
+//ArmPlatformGetPrimaryCoreMpId (
+// VOID
+// );
+ASM_FUNC(ArmPlatformGetPrimaryCoreMpId)
+ MOV32 (r0, FixedPcdGet32 (PcdArmPrimaryCore))
+ bx lr
+
+//UINTN
+//ArmPlatformIsPrimaryCore (
+// IN UINTN MpId
+// );
+ASM_FUNC(ArmPlatformIsPrimaryCore)
+ mov r0, #1
+ bx lr
+
+//UINTN
+//ArmPlatformGetCorePosition (
+// IN UINTN MpId
+// );
+// With this function: CorePos = (ClusterId * 4) + CoreId
+ASM_FUNC(ArmPlatformGetCorePosition)
+ and r1, r0, #ARM_CORE_MASK
+ and r0, r0, #ARM_CLUSTER_MASK
+ add r0, r1, r0, LSR #6
+ bx lr
+
+//EFI_PHYSICAL_ADDRESS
+//GetPhysAddrTop (
+// VOID
+// );
+ASM_FUNC(ArmGetPhysAddrTop)
+ mov r0, #0x00000000
+ mov r1, #0x10000
+ bx lr
+
+ASM_FUNCTION_REMOVE_IF_UNREFERENCED
diff --git a/Platforms/RaspberryPi/Library/RaspberryPiPlatformLib/ARM/VirtHelper.asm b/Platforms/RaspberryPi/Library/RaspberryPiPlatformLib/ARM/VirtHelper.asm
new file mode 100644
index 000000000000..b476516f2115
--- /dev/null
+++ b/Platforms/RaspberryPi/Library/RaspberryPiPlatformLib/ARM/VirtHelper.asm
@@ -0,0 +1,71 @@
+//
+// Copyright (c) 2011-2014, ARM Limited. All rights reserved.
+// Copyright (c) 2014, Linaro Limited. All rights reserved.
+//
+// This program and the accompanying materials
+// are licensed and made available under the terms and conditions of the BSD License
+// which accompanies this distribution. The full text of the license may be found at
+// http://opensource.org/licenses/bsd-license.php
+//
+// THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+// WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+//
+
+#include <Library/ArmLib.h>
+#include <AutoGen.h>
+
+ INCLUDE AsmMacroIoLib.inc
+
+ EXPORT ArmPlatformPeiBootAction
+ EXPORT ArmPlatformIsPrimaryCore
+ EXPORT ArmPlatformGetPrimaryCoreMpId
+ EXPORT ArmPlatformGetCorePosition
+ EXPORT ArmGetPhysAddrTop
+
+ AREA VirtHelper, CODE, READONLY
+
+ArmPlatformPeiBootAction FUNCTION
+ bx lr
+ ENDFUNC
+
+//UINTN
+//ArmPlatformGetPrimaryCoreMpId (
+// VOID
+// );
+ArmPlatformGetPrimaryCoreMpId FUNCTION
+ MOV32 r0, FixedPcdGet32 (PcdArmPrimaryCore)
+ bx lr
+ ENDFUNC
+
+//UINTN
+//ArmPlatformIsPrimaryCore (
+// IN UINTN MpId
+// );
+ArmPlatformIsPrimaryCore FUNCTION
+ mov r0, #1
+ bx lr
+ ENDFUNC
+
+//UINTN
+//ArmPlatformGetCorePosition (
+// IN UINTN MpId
+// );
+// With this function: CorePos = (ClusterId * 4) + CoreId
+ArmPlatformGetCorePosition FUNCTION
+ and r1, r0, #ARM_CORE_MASK
+ and r0, r0, #ARM_CLUSTER_MASK
+ add r0, r1, r0, LSR #6
+ bx lr
+ ENDFUNC
+
+//EFI_PHYSICAL_ADDRESS
+//GetPhysAddrTop (
+// VOID
+// );
+ArmGetPhysAddrTop FUNCTION
+ mov r0, #0x00000000
+ mov r1, #0x10000
+ bx lr
+ ENDFUNC
+
+ END
diff --git a/Platforms/RaspberryPi/Library/RaspberryPiPlatformLib/FdtParser.c b/Platforms/RaspberryPi/Library/RaspberryPiPlatformLib/FdtParser.c
new file mode 100644
index 000000000000..afdc81a8839d
--- /dev/null
+++ b/Platforms/RaspberryPi/Library/RaspberryPiPlatformLib/FdtParser.c
@@ -0,0 +1,90 @@
+/*
+ * Copyright (c) 2015, Linaro Ltd. All rights reserved.
+ *
+ * This program and the accompanying materials
+ * are licensed and made available under the terms and conditions of the BSD License
+ * which accompanies this distribution. The full text of the license may be found at
+ * http://opensource.org/licenses/bsd-license.php
+ *
+ * THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+ */
+
+#include <Uefi.h>
+#include <Include/libfdt.h>
+
+BOOLEAN
+FindMemnode (
+ IN VOID *DeviceTreeBlob,
+ OUT UINT64 *SystemMemoryBase,
+ OUT UINT64 *SystemMemorySize
+ )
+{
+ INT32 MemoryNode;
+ INT32 AddressCells;
+ INT32 SizeCells;
+ INT32 Length;
+ CONST INT32 *Prop;
+
+ if (fdt_check_header (DeviceTreeBlob) != 0) {
+ return FALSE;
+ }
+
+ //
+ // Look for a node called "memory" at the lowest level of the tree
+ //
+ MemoryNode = fdt_path_offset (DeviceTreeBlob, "/memory");
+ if (MemoryNode <= 0) {
+ return FALSE;
+ }
+
+ //
+ // Retrieve the #address-cells and #size-cells properties
+ // from the root node, or use the default if not provided.
+ //
+ AddressCells = 1;
+ SizeCells = 1;
+
+ Prop = fdt_getprop (DeviceTreeBlob, 0, "#address-cells", &Length);
+ if (Length == 4) {
+ AddressCells = fdt32_to_cpu (*Prop);
+ }
+
+ Prop = fdt_getprop (DeviceTreeBlob, 0, "#size-cells", &Length);
+ if (Length == 4) {
+ SizeCells = fdt32_to_cpu (*Prop);
+ }
+
+ //
+ // Now find the 'reg' property of the /memory node, and read the first
+ // range listed.
+ //
+ Prop = fdt_getprop (DeviceTreeBlob, MemoryNode, "reg", &Length);
+
+ if (Length < (AddressCells + SizeCells) * sizeof (INT32)) {
+ return FALSE;
+ }
+
+ *SystemMemoryBase = fdt32_to_cpu (Prop[0]);
+ if (AddressCells > 1) {
+ *SystemMemoryBase = (*SystemMemoryBase << 32) | fdt32_to_cpu (Prop[1]);
+ }
+ Prop += AddressCells;
+
+ *SystemMemorySize = fdt32_to_cpu (Prop[0]);
+ if (SizeCells > 1) {
+ *SystemMemorySize = (*SystemMemorySize << 32) | fdt32_to_cpu (Prop[1]);
+ }
+
+ return TRUE;
+}
+
+VOID
+CopyFdt (
+ IN VOID *FdtDest,
+ IN VOID *FdtSource
+ )
+{
+ fdt_pack(FdtSource);
+ CopyMem (FdtDest, FdtSource, fdt_totalsize (FdtSource));
+}
diff --git a/Platforms/RaspberryPi/Library/RaspberryPiPlatformLib/RaspberryPi.c b/Platforms/RaspberryPi/Library/RaspberryPiPlatformLib/RaspberryPi.c
new file mode 100644
index 000000000000..b22f2df843e9
--- /dev/null
+++ b/Platforms/RaspberryPi/Library/RaspberryPiPlatformLib/RaspberryPi.c
@@ -0,0 +1,71 @@
+/** @file
+*
+* Copyright (c) 2011-2013, ARM Limited. All rights reserved.
+* Copyright (c) 2014, Red Hat, Inc.
+* Copyright (c) 2014-2016, Linaro Limited. All rights reserved.
+*
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#include <Library/IoLib.h>
+#include <Library/ArmPlatformLib.h>
+#include <Library/DebugLib.h>
+#include <ArmPlatform.h>
+#include <Pi/PiBootMode.h>
+
+/**
+ Return the current Boot Mode
+
+ This function returns the boot reason on the platform
+
+ @return Return the current Boot Mode of the platform
+
+**/
+EFI_BOOT_MODE
+ArmPlatformGetBootMode (
+ VOID
+ )
+{
+ return BOOT_WITH_FULL_CONFIGURATION;
+}
+
+/**
+ This function is called by PrePeiCore, in the SEC phase.
+**/
+RETURN_STATUS
+ArmPlatformInitialize (
+ IN UINTN MpId
+ )
+{
+ //
+ // We are relying on ArmPlatformInitializeSystemMemory () being called from
+ // InitializeMemory (), which only occurs if the following feature is disabled
+ //
+ ASSERT (!FeaturePcdGet (PcdSystemMemoryInitializeInSec));
+ return RETURN_SUCCESS;
+}
+
+VOID
+ArmPlatformInitializeSystemMemory (
+ VOID
+ )
+{
+}
+
+VOID
+ArmPlatformGetPlatformPpiList (
+ OUT UINTN *PpiListSize,
+ OUT EFI_PEI_PPI_DESCRIPTOR **PpiList
+ )
+{
+ *PpiListSize = 0;
+ *PpiList = NULL;
+}
diff --git a/Platforms/RaspberryPi/Library/RaspberryPiPlatformLib/RaspberryPiMem.c b/Platforms/RaspberryPi/Library/RaspberryPiPlatformLib/RaspberryPiMem.c
new file mode 100644
index 000000000000..3f8be3a5bbac
--- /dev/null
+++ b/Platforms/RaspberryPi/Library/RaspberryPiPlatformLib/RaspberryPiMem.c
@@ -0,0 +1,54 @@
+/** @file
+*
+* Copyright (c) 2014, Linaro Limited. All rights reserved.
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#include <Library/ArmPlatformLib.h>
+#include <Library/DebugLib.h>
+#include <Library/PcdLib.h>
+
+STATIC ARM_MEMORY_REGION_DESCRIPTOR RaspberryPiMemoryRegionDescriptor[] = {
+ { 0x0, 0x0, 0x0, ARM_MEMORY_REGION_ATTRIBUTE_WRITE_BACK },
+ { 0x3f000000, 0x3f000000, 0x02000000, ARM_MEMORY_REGION_ATTRIBUTE_DEVICE },
+ { }
+};
+
+/**
+ Return the Virtual Memory Map of your platform
+
+ This Virtual Memory Map is used by MemoryInitPei Module to initialize the MMU
+ on your platform.
+
+ @param[out] VirtualMemoryMap Array of ARM_MEMORY_REGION_DESCRIPTOR
+ describing a Physical-to-Virtual Memory
+ mapping. This array must be ended by a
+ zero-filled entry
+
+**/
+VOID
+ArmPlatformGetVirtualMemoryMap (
+ IN ARM_MEMORY_REGION_DESCRIPTOR** VirtualMemoryMap
+ )
+{
+ RaspberryPiMemoryRegionDescriptor[0].Length = PcdGet64 (PcdSystemMemorySize);
+
+ DEBUG ((EFI_D_INFO, "%a: Dumping System DRAM Memory Map:\n"
+ "\tPhysicalBase: 0x%lX\n"
+ "\tVirtualBase: 0x%lX\n"
+ "\tLength: 0x%lX\n",
+ __FUNCTION__,
+ RaspberryPiMemoryRegionDescriptor[0].PhysicalBase,
+ RaspberryPiMemoryRegionDescriptor[0].VirtualBase,
+ RaspberryPiMemoryRegionDescriptor[0].Length));
+
+ *VirtualMemoryMap = RaspberryPiMemoryRegionDescriptor;
+}
diff --git a/Platforms/RaspberryPi/Library/RaspberryPiPlatformLib/RaspberryPiPlatformLib.inf b/Platforms/RaspberryPi/Library/RaspberryPiPlatformLib/RaspberryPiPlatformLib.inf
new file mode 100644
index 000000000000..b7e8f8fac95c
--- /dev/null
+++ b/Platforms/RaspberryPi/Library/RaspberryPiPlatformLib/RaspberryPiPlatformLib.inf
@@ -0,0 +1,65 @@
+#/* @file
+# Copyright (c) 2011-2014, ARM Limited. All rights reserved.
+# Copyright (c) 2014-2016, Linaro Limited. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#*/
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = RaspberryPiPlatformLib
+ FILE_GUID = 050182ef-f708-4148-b4bc-256cabf74fea
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = ArmPlatformLib|SEC PEIM
+
+[Packages]
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ EmbeddedPkg/EmbeddedPkg.dec
+ ArmPkg/ArmPkg.dec
+ ArmPlatformPkg/ArmPlatformPkg.dec
+ ArmVirtPkg/ArmVirtPkg.dec
+
+[LibraryClasses]
+ IoLib
+ MemoryAllocationLib
+ ArmLib
+ PrintLib
+ FdtLib
+
+[Sources.common]
+ RaspberryPi.c
+ RaspberryPiMem.c
+ FdtParser.c
+
+[Sources.AARCH64]
+ AARCH64/RaspberryPiHelper.S
+
+[Sources.ARM]
+ ARM/RaspberryPiHelper.S | GCC
+
+[FeaturePcd]
+ gEmbeddedTokenSpaceGuid.PcdCacheEnable
+ gArmPlatformTokenSpaceGuid.PcdSystemMemoryInitializeInSec
+
+[PatchPcd]
+ gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
+ gArmTokenSpaceGuid.PcdFdBaseAddress
+ gArmTokenSpaceGuid.PcdFvBaseAddress
+ gArmTokenSpaceGuid.PcdSystemMemoryBase
+ gArmTokenSpaceGuid.PcdSystemMemorySize
+
+[FixedPcd]
+ gArmPlatformTokenSpaceGuid.PcdCoreCount
+ gArmTokenSpaceGuid.PcdArmPrimaryCoreMask
+ gArmTokenSpaceGuid.PcdArmPrimaryCore
+ gArmTokenSpaceGuid.PcdFdSize
+ gEmbeddedTokenSpaceGuid.PcdPrePiCpuMemorySize
diff --git a/Platforms/RaspberryPi/Library/RaspberryPiPlatformPeiLib/RaspberryPiPlatformPeiLib.c b/Platforms/RaspberryPi/Library/RaspberryPiPlatformPeiLib/RaspberryPiPlatformPeiLib.c
new file mode 100644
index 000000000000..57a403bb47db
--- /dev/null
+++ b/Platforms/RaspberryPi/Library/RaspberryPiPlatformPeiLib/RaspberryPiPlatformPeiLib.c
@@ -0,0 +1,56 @@
+/** @file
+*
+* Copyright (c) 2011-2014, ARM Limited. All rights reserved.
+* Copyright (c) 2014-2016, Linaro Limited. All rights reserved.
+*
+* This program and the accompanying materials
+* are licensed and made available under the terms and conditions of the BSD License
+* which accompanies this distribution. The full text of the license may be found at
+* http://opensource.org/licenses/bsd-license.php
+*
+* THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+* WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+*
+**/
+
+#include <PiPei.h>
+
+#include <Library/MemoryAllocationLib.h>
+#include <Library/DebugLib.h>
+#include <Library/HobLib.h>
+#include <Library/PcdLib.h>
+#include <libfdt.h>
+
+#include <Guid/FdtHob.h>
+
+EFI_STATUS
+EFIAPI
+PlatformPeim (
+ VOID
+ )
+{
+ VOID *Base;
+ VOID *NewBase;
+ UINTN FdtSize;
+ UINTN FdtPages;
+ UINT64 *FdtHobData;
+
+
+ Base = (VOID*)(UINTN)PcdGet64 (PcdDeviceTreeInitialBaseAddress);
+ ASSERT (Base != NULL);
+ ASSERT (fdt_check_header (Base) == 0);
+
+ FdtSize = fdt_totalsize (Base) + PcdGet32 (PcdDeviceTreeAllocationPadding);
+ FdtPages = EFI_SIZE_TO_PAGES (FdtSize);
+ NewBase = AllocatePages (FdtPages);
+ ASSERT (NewBase != NULL);
+ fdt_open_into (Base, NewBase, EFI_PAGES_TO_SIZE (FdtPages));
+
+ FdtHobData = BuildGuidHob (&gFdtHobGuid, sizeof *FdtHobData);
+ ASSERT (FdtHobData != NULL);
+ *FdtHobData = (UINTN)NewBase;
+
+ BuildFvHob (PcdGet64 (PcdFvBaseAddress), PcdGet32 (PcdFvSize));
+
+ return EFI_SUCCESS;
+}
diff --git a/Platforms/RaspberryPi/Library/RaspberryPiPlatformPeiLib/RaspberryPiPlatformPeiLib.inf b/Platforms/RaspberryPi/Library/RaspberryPiPlatformPeiLib/RaspberryPiPlatformPeiLib.inf
new file mode 100644
index 000000000000..a62644b431d9
--- /dev/null
+++ b/Platforms/RaspberryPi/Library/RaspberryPiPlatformPeiLib/RaspberryPiPlatformPeiLib.inf
@@ -0,0 +1,51 @@
+#/** @file
+#
+# Copyright (c) 2011-2015, ARM Limited. All rights reserved.
+# Copyright (c) 2014-2016, Linaro Limited. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#**/
+
+[Defines]
+ INF_VERSION = 0x00010005
+ BASE_NAME = RaspberryPiPlatformPeiLib
+ FILE_GUID = e523d495-3ae1-4386-a388-0cfd36fdcb7c
+ MODULE_TYPE = SEC
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = PlatformPeiLib
+
+[Sources]
+ RaspberryPiPlatformPeiLib.c
+
+[Packages]
+ ArmPkg/ArmPkg.dec
+ ArmVirtPkg/ArmVirtPkg.dec
+ MdePkg/MdePkg.dec
+ MdeModulePkg/MdeModulePkg.dec
+ EmbeddedPkg/EmbeddedPkg.dec
+
+[LibraryClasses]
+ DebugLib
+ HobLib
+ FdtLib
+
+[FixedPcd]
+ gArmTokenSpaceGuid.PcdFvSize
+ gArmVirtTokenSpaceGuid.PcdDeviceTreeAllocationPadding
+
+[Pcd]
+ gArmTokenSpaceGuid.PcdFvBaseAddress
+ gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress
+
+[Guids]
+ gFdtHobGuid
+
+[Depex]
+ gEfiPeiMemoryDiscoveredPpiGuid
diff --git a/Platforms/RaspberryPi/Library/RaspberryPiResetSystemLib/RaspberryPiResetSystemLib.c b/Platforms/RaspberryPi/Library/RaspberryPiResetSystemLib/RaspberryPiResetSystemLib.c
new file mode 100644
index 000000000000..5cead6d5e16f
--- /dev/null
+++ b/Platforms/RaspberryPi/Library/RaspberryPiResetSystemLib/RaspberryPiResetSystemLib.c
@@ -0,0 +1,86 @@
+/** @file
+ Copyright (c) 2016, Linaro, Ltd. All rights reserved.<BR>
+
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+
+#include <PiDxe.h>
+
+#include <Library/BaseLib.h>
+#include <Library/IoLib.h>
+#include <Library/EfiResetSystemLib.h>
+
+
+/**
+ Resets the entire platform.
+
+ @param ResetType The type of reset to perform.
+ @param ResetStatus The status code for the reset.
+ @param DataSize The size, in bytes, of WatchdogData.
+ @param ResetData For a ResetType of EfiResetCold, EfiResetWarm, or
+ EfiResetShutdown the data buffer starts with a Null-terminated
+ Unicode string, optionally followed by additional binary data.
+
+**/
+EFI_STATUS
+EFIAPI
+LibResetSystem (
+ IN EFI_RESET_TYPE ResetType,
+ IN EFI_STATUS ResetStatus,
+ IN UINTN DataSize,
+ IN CHAR16 *ResetData OPTIONAL
+ )
+{
+ switch (ResetType) {
+ case EfiResetCold:
+ // system power cycle
+ break;
+
+ case EfiResetWarm:
+ // not a full power cycle, maybe memory stays around.
+ // if not support do the same thing as EfiResetCold.
+ break;
+
+ case EfiResetShutdown:
+ // turn off the system.
+ // if not support do the same thing as EfiResetCold.
+ break;
+
+ default:
+ return EFI_INVALID_PARAMETER;
+ }
+
+ //
+ // If we reset, we would not have returned...
+ //
+ return EFI_DEVICE_ERROR;
+}
+
+
+
+/**
+ Initialize any infrastructure required for LibResetSystem () to function.
+
+ @param ImageHandle The firmware allocated handle for the EFI image.
+ @param SystemTable A pointer to the EFI System Table.
+
+ @retval EFI_SUCCESS The constructor always returns EFI_SUCCESS.
+
+**/
+EFI_STATUS
+EFIAPI
+LibInitializeResetSystem (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ return EFI_SUCCESS;
+}
diff --git a/Platforms/RaspberryPi/Library/RaspberryPiResetSystemLib/RaspberryPiResetSystemLib.inf b/Platforms/RaspberryPi/Library/RaspberryPiResetSystemLib/RaspberryPiResetSystemLib.inf
new file mode 100644
index 000000000000..46d8337e87b8
--- /dev/null
+++ b/Platforms/RaspberryPi/Library/RaspberryPiResetSystemLib/RaspberryPiResetSystemLib.inf
@@ -0,0 +1,31 @@
+#/** @file
+# Copyright (c) 2016, Linaro, Ltd. All rights reserved.<BR>
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#
+#**/
+
+[Defines]
+ INF_VERSION = 0x00010019
+ BASE_NAME = RaspberryPiResetSystemLib
+ FILE_GUID = b4ccc3fb-96ab-4ced-9c47-fedb8a81fc3d
+ MODULE_TYPE = BASE
+ VERSION_STRING = 1.0
+ LIBRARY_CLASS = EfiResetSystemLib
+
+[Sources]
+ RaspberryPiResetSystemLib.c
+
+[Packages]
+ MdePkg/MdePkg.dec
+ EmbeddedPkg/EmbeddedPkg.dec
+
+[LibraryClasses]
+ IoLib
+ DebugLib
\ No newline at end of file
diff --git a/Platforms/RaspberryPi/RaspberryPi.dsc b/Platforms/RaspberryPi/RaspberryPi.dsc
new file mode 100644
index 000000000000..9119eabf3faa
--- /dev/null
+++ b/Platforms/RaspberryPi/RaspberryPi.dsc
@@ -0,0 +1,684 @@
+#
+# Copyright (c) 2011-2015, ARM Limited. All rights reserved.
+# Copyright (c) 2014, Linaro Limited. All rights reserved.
+# Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+#
+
+################################################################################
+#
+# Defines Section - statements that will be processed to create a Makefile.
+#
+################################################################################
+[Defines]
+ PLATFORM_NAME = RaspberryPi
+ PLATFORM_GUID = 5d30c4fc-93cf-40c9-8486-3badc0410816
+ PLATFORM_VERSION = 0.1
+ DSC_SPECIFICATION = 0x00010005
+ OUTPUT_DIRECTORY = Build/RaspberryPi-$(ARCH)
+ SUPPORTED_ARCHITECTURES = AARCH64|ARM
+ BUILD_TARGETS = DEBUG|RELEASE
+ SKUID_IDENTIFIER = DEFAULT
+ FLASH_DEFINITION = OpenPlatformPkg/Platforms/RaspberryPi/RaspberryPi.fdf
+
+ #
+ # Defines for default states. These can be changed on the command line.
+ # -D FLAG=VALUE
+ #
+ DEFINE SECURE_BOOT_ENABLE = FALSE
+ DEFINE DEBUG_PRINT_ERROR_LEVEL = 0x8000004F
+ DEFINE TTY_TERMINAL = TRUE
+
+[BuildOptions.common.EDKII.DXE_RUNTIME_DRIVER]
+ GCC:*_*_ARM_DLINK_FLAGS = -z common-page-size=0x1000
+ GCC:*_*_AARCH64_DLINK_FLAGS = -z common-page-size=0x10000
+ RVCT:*_*_ARM_DLINK_FLAGS = --scatter $(EDK_TOOLS_PATH)/Scripts/Rvct-Align4K.sct
+
+[LibraryClasses.common]
+!if $(TARGET) == RELEASE
+ DebugLib|MdePkg/Library/BaseDebugLibNull/BaseDebugLibNull.inf
+ UncachedMemoryAllocationLib|ArmPkg/Library/UncachedMemoryAllocationLib/UncachedMemoryAllocationLib.inf
+!else
+ DebugLib|MdePkg/Library/BaseDebugLibSerialPort/BaseDebugLibSerialPort.inf
+ UncachedMemoryAllocationLib|ArmPkg/Library/DebugUncachedMemoryAllocationLib/DebugUncachedMemoryAllocationLib.inf
+!endif
+ DebugPrintErrorLevelLib|MdePkg/Library/BaseDebugPrintErrorLevelLib/BaseDebugPrintErrorLevelLib.inf
+
+ BaseLib|MdePkg/Library/BaseLib/BaseLib.inf
+ SynchronizationLib|MdePkg/Library/BaseSynchronizationLib/BaseSynchronizationLib.inf
+ PerformanceLib|MdePkg/Library/BasePerformanceLibNull/BasePerformanceLibNull.inf
+ PrintLib|MdePkg/Library/BasePrintLib/BasePrintLib.inf
+ PeCoffGetEntryPointLib|MdePkg/Library/BasePeCoffGetEntryPointLib/BasePeCoffGetEntryPointLib.inf
+ PeCoffLib|MdePkg/Library/BasePeCoffLib/BasePeCoffLib.inf
+ IoLib|MdePkg/Library/BaseIoLibIntrinsic/BaseIoLibIntrinsic.inf
+ UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.inf
+ CpuLib|MdePkg/Library/BaseCpuLib/BaseCpuLib.inf
+
+ UefiLib|MdePkg/Library/UefiLib/UefiLib.inf
+ HobLib|MdePkg/Library/DxeHobLib/DxeHobLib.inf
+ UefiRuntimeServicesTableLib|MdePkg/Library/UefiRuntimeServicesTableLib/UefiRuntimeServicesTableLib.inf
+ DevicePathLib|MdePkg/Library/UefiDevicePathLib/UefiDevicePathLib.inf
+ UefiBootServicesTableLib|MdePkg/Library/UefiBootServicesTableLib/UefiBootServicesTableLib.inf
+ DxeServicesTableLib|MdePkg/Library/DxeServicesTableLib/DxeServicesTableLib.inf
+ DxeServicesLib|MdePkg/Library/DxeServicesLib/DxeServicesLib.inf
+ UefiDriverEntryPoint|MdePkg/Library/UefiDriverEntryPoint/UefiDriverEntryPoint.inf
+ UefiApplicationEntryPoint|MdePkg/Library/UefiApplicationEntryPoint/UefiApplicationEntryPoint.inf
+ HiiLib|MdeModulePkg/Library/UefiHiiLib/UefiHiiLib.inf
+ UefiHiiServicesLib|MdeModulePkg/Library/UefiHiiServicesLib/UefiHiiServicesLib.inf
+ SortLib|MdeModulePkg/Library/UefiSortLib/UefiSortLib.inf
+
+ UefiRuntimeLib|MdePkg/Library/UefiRuntimeLib/UefiRuntimeLib.inf
+ OrderedCollectionLib|MdePkg/Library/BaseOrderedCollectionRedBlackTreeLib/BaseOrderedCollectionRedBlackTreeLib.inf
+
+ #
+ # Ramdisk Requirements
+ #
+ FileExplorerLib|MdeModulePkg/Library/FileExplorerLib/FileExplorerLib.inf
+
+ # Allow dynamic PCDs
+ #
+ PcdLib|MdePkg/Library/DxePcdLib/DxePcdLib.inf
+
+ # use the accelerated BaseMemoryLibOptDxe by default, overrides for SEC/PEI below
+ BaseMemoryLib|MdePkg/Library/BaseMemoryLibOptDxe/BaseMemoryLibOptDxe.inf
+
+ # Networking Requirements
+ NetLib|MdeModulePkg/Library/DxeNetLib/DxeNetLib.inf
+ DpcLib|MdeModulePkg/Library/DxeDpcLib/DxeDpcLib.inf
+ UdpIoLib|MdeModulePkg/Library/DxeUdpIoLib/DxeUdpIoLib.inf
+ IpIoLib|MdeModulePkg/Library/DxeIpIoLib/DxeIpIoLib.inf
+
+ #
+ # It is not possible to prevent the ARM compiler from inserting calls to intrinsic functions.
+ # This library provides the instrinsic functions such a compiler may generate calls to.
+ #
+ NULL|ArmPkg/Library/CompilerIntrinsicsLib/CompilerIntrinsicsLib.inf
+
+ # Add support for GCC stack protector
+ NULL|MdePkg/Library/BaseStackCheckLib/BaseStackCheckLib.inf
+
+ # ARM Architectural Libraries
+ CacheMaintenanceLib|ArmPkg/Library/ArmCacheMaintenanceLib/ArmCacheMaintenanceLib.inf
+ DefaultExceptionHandlerLib|ArmPkg/Library/DefaultExceptionHandlerLib/DefaultExceptionHandlerLib.inf
+ CpuExceptionHandlerLib|ArmPkg/Library/ArmExceptionLib/ArmExceptionLib.inf
+ ArmDisassemblerLib|ArmPkg/Library/ArmDisassemblerLib/ArmDisassemblerLib.inf
+ DmaLib|ArmPkg/Library/ArmDmaLib/ArmDmaLib.inf
+ ArmPlatformStackLib|ArmPlatformPkg/Library/ArmPlatformStackLib/ArmPlatformStackLib.inf
+ ArmSmcLib|ArmPkg/Library/ArmSmcLib/ArmSmcLib.inf
+ ArmHvcLib|ArmPkg/Library/ArmHvcLib/ArmHvcLib.inf
+ ArmGenericTimerCounterLib|ArmPkg/Library/ArmGenericTimerPhyCounterLib/ArmGenericTimerPhyCounterLib.inf
+
+ PlatformPeiLib|OpenPlatformPkg/Platforms/RaspberryPi/Library/RaspberryPiPlatformPeiLib/RaspberryPiPlatformPeiLib.inf
+ MemoryInitPeiLib|ArmVirtPkg/Library/ArmVirtMemoryInitPeiLib/ArmVirtMemoryInitPeiLib.inf
+
+ PciCf8Lib|MdePkg/Library/BasePciCf8Lib/BasePciCf8Lib.inf
+ PciLib|MdePkg/Library/BasePciLibCf8/BasePciLibCf8.inf
+ PlatformHookLib|MdeModulePkg/Library/BasePlatformHookLibNull/BasePlatformHookLibNull.inf
+ SerialPortLib|MdeModulePkg/Library/BaseSerialPortLib16550/BaseSerialPortLib16550.inf
+
+ #
+ # Uncomment (and comment out the next line) For RealView Debugger. The Standard IO window
+ # in the debugger will show load and unload commands for symbols. You can cut and paste this
+ # into the command window to load symbols. We should be able to use a script to do this, but
+ # the version of RVD I have does not support scripts accessing system memory.
+ #
+ #PeCoffExtraActionLib|ArmPkg/Library/RvdPeCoffExtraActionLib/RvdPeCoffExtraActionLib.inf
+ PeCoffExtraActionLib|ArmPkg/Library/DebugPeCoffExtraActionLib/DebugPeCoffExtraActionLib.inf
+ #PeCoffExtraActionLib|MdePkg/Library/BasePeCoffExtraActionLibNull/BasePeCoffExtraActionLibNull.inf
+
+ DebugAgentLib|MdeModulePkg/Library/DebugAgentLibNull/DebugAgentLibNull.inf
+ DebugAgentTimerLib|EmbeddedPkg/Library/DebugAgentTimerLibNull/DebugAgentTimerLibNull.inf
+
+ # Flattened Device Tree (FDT) access library
+ FdtLib|EmbeddedPkg/Library/FdtLib/FdtLib.inf
+
+ # USB Libraries
+ UefiUsbLib|MdePkg/Library/UefiUsbLib/UefiUsbLib.inf
+
+ XenIoMmioLib|OvmfPkg/Library/XenIoMmioLib/XenIoMmioLib.inf
+
+ #
+ # Secure Boot dependencies
+ #
+!if $(SECURE_BOOT_ENABLE) == TRUE
+ IntrinsicLib|CryptoPkg/Library/IntrinsicLib/IntrinsicLib.inf
+ OpensslLib|CryptoPkg/Library/OpensslLib/OpensslLib.inf
+ TpmMeasurementLib|SecurityPkg/Library/DxeTpmMeasurementLib/DxeTpmMeasurementLib.inf
+ AuthVariableLib|SecurityPkg/Library/AuthVariableLib/AuthVariableLib.inf
+ BaseCryptLib|CryptoPkg/Library/BaseCryptLib/BaseCryptLib.inf
+
+ # re-use the UserPhysicalPresent() dummy implementation from the ovmf tree
+ PlatformSecureLib|OvmfPkg/Library/PlatformSecureLib/PlatformSecureLib.inf
+!else
+ TpmMeasurementLib|MdeModulePkg/Library/TpmMeasurementLibNull/TpmMeasurementLibNull.inf
+ AuthVariableLib|MdeModulePkg/Library/AuthVariableLibNull/AuthVariableLibNull.inf
+!endif
+ VarCheckLib|MdeModulePkg/Library/VarCheckLib/VarCheckLib.inf
+
+[LibraryClasses.common.SEC]
+ PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
+ BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf
+
+ DebugAgentLib|ArmPkg/Library/DebugAgentSymbolsBaseLib/DebugAgentSymbolsBaseLib.inf
+ DefaultExceptionHandlerLib|ArmPkg/Library/DefaultExceptionHandlerLib/DefaultExceptionHandlerLibBase.inf
+ HobLib|MdePkg/Library/PeiHobLib/PeiHobLib.inf
+ PeiServicesLib|MdePkg/Library/PeiServicesLib/PeiServicesLib.inf
+ PeiServicesTablePointerLib|ArmPkg/Library/PeiServicesTablePointerLib/PeiServicesTablePointerLib.inf
+ MemoryAllocationLib|MdePkg/Library/PeiMemoryAllocationLib/PeiMemoryAllocationLib.inf
+
+[LibraryClasses.common.PEI_CORE]
+ PcdLib|MdePkg/Library/PeiPcdLib/PeiPcdLib.inf
+ BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf
+ HobLib|MdePkg/Library/PeiHobLib/PeiHobLib.inf
+ PeiServicesLib|MdePkg/Library/PeiServicesLib/PeiServicesLib.inf
+ MemoryAllocationLib|MdePkg/Library/PeiMemoryAllocationLib/PeiMemoryAllocationLib.inf
+ PeiCoreEntryPoint|MdePkg/Library/PeiCoreEntryPoint/PeiCoreEntryPoint.inf
+ PerformanceLib|MdeModulePkg/Library/PeiPerformanceLib/PeiPerformanceLib.inf
+ ReportStatusCodeLib|MdeModulePkg/Library/PeiReportStatusCodeLib/PeiReportStatusCodeLib.inf
+ OemHookStatusCodeLib|MdeModulePkg/Library/OemHookStatusCodeLibNull/OemHookStatusCodeLibNull.inf
+ PeCoffGetEntryPointLib|MdePkg/Library/BasePeCoffGetEntryPointLib/BasePeCoffGetEntryPointLib.inf
+ UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.inf
+ ExtractGuidedSectionLib|MdePkg/Library/PeiExtractGuidedSectionLib/PeiExtractGuidedSectionLib.inf
+
+ PeiServicesTablePointerLib|ArmPkg/Library/PeiServicesTablePointerLib/PeiServicesTablePointerLib.inf
+
+[LibraryClasses.common.PEIM]
+ PcdLib|MdePkg/Library/PeiPcdLib/PeiPcdLib.inf
+ BaseMemoryLib|MdePkg/Library/BaseMemoryLib/BaseMemoryLib.inf
+ HobLib|MdePkg/Library/PeiHobLib/PeiHobLib.inf
+ PeiServicesLib|MdePkg/Library/PeiServicesLib/PeiServicesLib.inf
+ MemoryAllocationLib|MdePkg/Library/PeiMemoryAllocationLib/PeiMemoryAllocationLib.inf
+ PeimEntryPoint|MdePkg/Library/PeimEntryPoint/PeimEntryPoint.inf
+ PerformanceLib|MdeModulePkg/Library/PeiPerformanceLib/PeiPerformanceLib.inf
+ ReportStatusCodeLib|MdeModulePkg/Library/PeiReportStatusCodeLib/PeiReportStatusCodeLib.inf
+ OemHookStatusCodeLib|MdeModulePkg/Library/OemHookStatusCodeLibNull/OemHookStatusCodeLibNull.inf
+ PeCoffGetEntryPointLib|MdePkg/Library/BasePeCoffGetEntryPointLib/BasePeCoffGetEntryPointLib.inf
+ PeiResourcePublicationLib|MdePkg/Library/PeiResourcePublicationLib/PeiResourcePublicationLib.inf
+ UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.inf
+ ExtractGuidedSectionLib|MdePkg/Library/PeiExtractGuidedSectionLib/PeiExtractGuidedSectionLib.inf
+
+ PeiServicesTablePointerLib|ArmPkg/Library/PeiServicesTablePointerLib/PeiServicesTablePointerLib.inf
+
+[LibraryClasses.common.DXE_CORE]
+ HobLib|MdePkg/Library/DxeCoreHobLib/DxeCoreHobLib.inf
+ MemoryAllocationLib|MdeModulePkg/Library/DxeCoreMemoryAllocationLib/DxeCoreMemoryAllocationLib.inf
+ DxeCoreEntryPoint|MdePkg/Library/DxeCoreEntryPoint/DxeCoreEntryPoint.inf
+ ReportStatusCodeLib|IntelFrameworkModulePkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf
+ ExtractGuidedSectionLib|MdePkg/Library/DxeExtractGuidedSectionLib/DxeExtractGuidedSectionLib.inf
+ UefiDecompressLib|MdePkg/Library/BaseUefiDecompressLib/BaseUefiDecompressLib.inf
+ PerformanceLib|MdeModulePkg/Library/DxeCorePerformanceLib/DxeCorePerformanceLib.inf
+
+[LibraryClasses.common.DXE_DRIVER]
+ ReportStatusCodeLib|IntelFrameworkModulePkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf
+ SecurityManagementLib|MdeModulePkg/Library/DxeSecurityManagementLib/DxeSecurityManagementLib.inf
+ PerformanceLib|MdeModulePkg/Library/DxePerformanceLib/DxePerformanceLib.inf
+ MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
+ NonDiscoverableDeviceRegistrationLib|MdeModulePkg/Library/NonDiscoverableDeviceRegistrationLib/NonDiscoverableDeviceRegistrationLib.inf
+
+[LibraryClasses.common.UEFI_APPLICATION]
+ UefiDecompressLib|IntelFrameworkModulePkg/Library/BaseUefiTianoCustomDecompressLib/BaseUefiTianoCustomDecompressLib.inf
+ PerformanceLib|MdeModulePkg/Library/DxePerformanceLib/DxePerformanceLib.inf
+ MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
+ HiiLib|MdeModulePkg/Library/UefiHiiLib/UefiHiiLib.inf
+ ShellLib|ShellPkg/Library/UefiShellLib/UefiShellLib.inf
+ FileHandleLib|MdePkg/Library/UefiFileHandleLib/UefiFileHandleLib.inf
+ ReportStatusCodeLib|MdeModulePkg/Library/DxeReportStatusCodeLib/DxeReportStatusCodeLib.inf
+
+[LibraryClasses.common.UEFI_DRIVER]
+ ReportStatusCodeLib|IntelFrameworkModulePkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf
+ UefiDecompressLib|IntelFrameworkModulePkg/Library/BaseUefiTianoCustomDecompressLib/BaseUefiTianoCustomDecompressLib.inf
+ ExtractGuidedSectionLib|MdePkg/Library/DxeExtractGuidedSectionLib/DxeExtractGuidedSectionLib.inf
+ PerformanceLib|MdeModulePkg/Library/DxePerformanceLib/DxePerformanceLib.inf
+ MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
+
+[LibraryClasses.common.DXE_RUNTIME_DRIVER]
+ MemoryAllocationLib|MdePkg/Library/UefiMemoryAllocationLib/UefiMemoryAllocationLib.inf
+ ReportStatusCodeLib|IntelFrameworkModulePkg/Library/DxeReportStatusCodeLibFramework/DxeReportStatusCodeLib.inf
+ CapsuleLib|MdeModulePkg/Library/DxeCapsuleLibNull/DxeCapsuleLibNull.inf
+
+!if $(SECURE_BOOT_ENABLE) == TRUE
+ BaseCryptLib|CryptoPkg/Library/BaseCryptLib/RuntimeCryptLib.inf
+!endif
+
+[LibraryClasses.ARM]
+ ArmSoftFloatLib|ArmPkg/Library/ArmSoftFloatLib/ArmSoftFloatLib.inf
+
+################################################################################
+#
+# Pcd Section - list of all EDK II PCD Entries defined by this Platform
+#
+################################################################################
+
+[PcdsFeatureFlag.common]
+ #
+ # Control what commands are supported from the UI
+ # Turn these on and off to add features or save size
+ #
+ gEmbeddedTokenSpaceGuid.PcdEmbeddedMacBoot|TRUE
+ gEmbeddedTokenSpaceGuid.PcdEmbeddedDirCmd|TRUE
+ gEmbeddedTokenSpaceGuid.PcdEmbeddedHobCmd|TRUE
+ gEmbeddedTokenSpaceGuid.PcdEmbeddedHwDebugCmd|TRUE
+ gEmbeddedTokenSpaceGuid.PcdEmbeddedPciDebugCmd|TRUE
+ gEmbeddedTokenSpaceGuid.PcdEmbeddedIoEnable|FALSE
+ gEmbeddedTokenSpaceGuid.PcdEmbeddedScriptCmd|FALSE
+
+ gEmbeddedTokenSpaceGuid.PcdCacheEnable|TRUE
+
+ # Use the Vector Table location in CpuDxe. We will not copy the Vector Table at PcdCpuVectorBaseAddress
+ gArmTokenSpaceGuid.PcdRelocateVectorTable|FALSE
+
+ gEmbeddedTokenSpaceGuid.PcdPrePiProduceMemoryTypeInformationHob|TRUE
+
+ gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|TRUE
+
+[PcdsFixedAtBuild.common]
+ gEfiMdePkgTokenSpaceGuid.PcdMaximumUnicodeStringLength|1000000
+ gEfiMdePkgTokenSpaceGuid.PcdMaximumAsciiStringLength|1000000
+ gEfiMdePkgTokenSpaceGuid.PcdMaximumLinkedListLength|1000000
+ gEfiMdePkgTokenSpaceGuid.PcdSpinLockTimeout|10000000
+ gEfiMdePkgTokenSpaceGuid.PcdDebugClearMemoryValue|0xAF
+ gEfiMdePkgTokenSpaceGuid.PcdPerformanceLibraryPropertyMask|1
+ gEfiMdePkgTokenSpaceGuid.PcdPostCodePropertyMask|0
+ gEfiMdePkgTokenSpaceGuid.PcdUefiLibMaxPrintBufferSize|320
+
+ # DEBUG_ASSERT_ENABLED 0x01
+ # DEBUG_PRINT_ENABLED 0x02
+ # DEBUG_CODE_ENABLED 0x04
+ # CLEAR_MEMORY_ENABLED 0x08
+ # ASSERT_BREAKPOINT_ENABLED 0x10
+ # ASSERT_DEADLOOP_ENABLED 0x20
+!if $(TARGET) == RELEASE
+ gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0x21
+!else
+ gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0x2f
+!endif
+
+ # DEBUG_INIT 0x00000001 // Initialization
+ # DEBUG_WARN 0x00000002 // Warnings
+ # DEBUG_LOAD 0x00000004 // Load events
+ # DEBUG_FS 0x00000008 // EFI File system
+ # DEBUG_POOL 0x00000010 // Alloc & Free (pool)
+ # DEBUG_PAGE 0x00000020 // Alloc & Free (page)
+ # DEBUG_INFO 0x00000040 // Informational debug messages
+ # DEBUG_DISPATCH 0x00000080 // PEI/DXE/SMM Dispatchers
+ # DEBUG_VARIABLE 0x00000100 // Variable
+ # DEBUG_BM 0x00000400 // Boot Manager
+ # DEBUG_BLKIO 0x00001000 // BlkIo Driver
+ # DEBUG_NET 0x00004000 // SNP Driver
+ # DEBUG_UNDI 0x00010000 // UNDI Driver
+ # DEBUG_LOADFILE 0x00020000 // LoadFile
+ # DEBUG_EVENT 0x00080000 // Event messages
+ # DEBUG_GCD 0x00100000 // Global Coherency Database changes
+ # DEBUG_CACHE 0x00200000 // Memory range cachability changes
+ # DEBUG_VERBOSE 0x00400000 // Detailed debug messages that may
+ # // significantly impact boot performance
+ # DEBUG_ERROR 0x80000000 // Error
+ gEfiMdePkgTokenSpaceGuid.PcdDebugPrintErrorLevel|$(DEBUG_PRINT_ERROR_LEVEL)
+
+ gEfiMdePkgTokenSpaceGuid.PcdReportStatusCodePropertyMask|0x07
+
+ #
+ # Optional feature to help prevent EFI memory map fragments
+ # Turned on and off via: PcdPrePiProduceMemoryTypeInformationHob
+ # Values are in EFI Pages (4K). DXE Core will make sure that
+ # at least this much of each type of memory can be allocated
+ # from a single memory range. This way you only end up with
+ # maximum of two fragements for each type in the memory map
+ # (the memory used, and the free memory that was prereserved
+ # but not used).
+ #
+ gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiACPIReclaimMemory|0
+ gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiACPIMemoryNVS|0
+ gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiReservedMemoryType|0
+!if $(SECURE_BOOT_ENABLE) == TRUE
+ gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiRuntimeServicesData|600
+ gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiRuntimeServicesCode|400
+ gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiBootServicesCode|1500
+!else
+ gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiRuntimeServicesData|300
+ gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiRuntimeServicesCode|150
+ gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiBootServicesCode|1000
+!endif
+ gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiBootServicesData|12000
+ gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiLoaderCode|20
+ gEmbeddedTokenSpaceGuid.PcdMemoryTypeEfiLoaderData|0
+
+ #
+ # ARM Pcds
+ #
+ gArmTokenSpaceGuid.PcdArmUncachedMemoryMask|0x0000000000000000
+
+!if $(SECURE_BOOT_ENABLE) == TRUE
+ # override the default values from SecurityPkg to ensure images from all sources are verified in secure boot
+ gEfiSecurityPkgTokenSpaceGuid.PcdOptionRomImageVerificationPolicy|0x04
+ gEfiSecurityPkgTokenSpaceGuid.PcdFixedMediaImageVerificationPolicy|0x04
+ gEfiSecurityPkgTokenSpaceGuid.PcdRemovableMediaImageVerificationPolicy|0x04
+!endif
+
+!if $(TTY_TERMINAL) == TRUE
+ # Set terminal type to TtyTerm, the value encoded is EFI_TTY_TERM_GUID
+ gArmVirtTokenSpaceGuid.PcdTerminalTypeGuidBuffer|{0x80, 0x6d, 0x91, 0x7d, 0xb1, 0x5b, 0x8c, 0x45, 0xa4, 0x8f, 0xe2, 0x5f, 0xdd, 0x51, 0xef, 0x94}
+!endif
+
+ gEmbeddedTokenSpaceGuid.PcdInterruptBaseAddress|0x40000000
+ gArmTokenSpaceGuid.PcdArmArchTimerSecIntrNum|0x0
+ gArmTokenSpaceGuid.PcdArmArchTimerIntrNum|0x1
+ gArmTokenSpaceGuid.PcdArmArchTimerVirtIntrNum|0x2
+ gArmTokenSpaceGuid.PcdArmArchTimerHypIntrNum|0x3
+
+[PcdsFixedAtBuild.ARM]
+ gEmbeddedTokenSpaceGuid.PcdPrePiCpuMemorySize|40
+
+[LibraryClasses.AARCH64]
+ ArmCpuLib|ArmPkg/Drivers/ArmCpuLib/ArmCortexAEMv8Lib/ArmCortexAEMv8Lib.inf
+
+[LibraryClasses.ARM]
+ ArmCpuLib|ArmPkg/Drivers/ArmCpuLib/ArmCortexA15Lib/ArmCortexA15Lib.inf
+
+[LibraryClasses.common]
+ ArmLib|ArmPkg/Library/ArmLib/ArmBaseLib.inf
+ ArmMmuLib|ArmPkg/Library/ArmMmuLib/ArmMmuBaseLib.inf
+
+ # Virtio Support
+ VirtioLib|OvmfPkg/Library/VirtioLib/VirtioLib.inf
+ VirtioMmioDeviceLib|OvmfPkg/Library/VirtioMmioDeviceLib/VirtioMmioDeviceLib.inf
+
+ ArmPlatformLib|OpenPlatformPkg/Platforms/RaspberryPi/Library/RaspberryPiPlatformLib/RaspberryPiPlatformLib.inf
+ ArmPlatformSysConfigLib|ArmPlatformPkg/Library/ArmPlatformSysConfigLibNull/ArmPlatformSysConfigLibNull.inf
+
+ TimerLib|ArmPkg/Library/ArmArchTimerLib/ArmArchTimerLib.inf
+
+ CapsuleLib|MdeModulePkg/Library/DxeCapsuleLibNull/DxeCapsuleLibNull.inf
+ UefiBootManagerLib|MdeModulePkg/Library/UefiBootManagerLib/UefiBootManagerLib.inf
+ BootLogoLib|MdeModulePkg/Library/BootLogoLib/BootLogoLib.inf
+ PlatformBootManagerLib|ArmPkg/Library/PlatformBootManagerLib/PlatformBootManagerLib.inf
+ CustomizedDisplayLib|MdeModulePkg/Library/CustomizedDisplayLib/CustomizedDisplayLib.inf
+ QemuBootOrderLib|OvmfPkg/Library/QemuBootOrderLib/QemuBootOrderLib.inf
+ FileExplorerLib|MdeModulePkg/Library/FileExplorerLib/FileExplorerLib.inf
+
+[LibraryClasses.common.UEFI_DRIVER]
+ UefiScsiLib|MdePkg/Library/UefiScsiLib/UefiScsiLib.inf
+
+[BuildOptions]
+ GCC:RELEASE_*_*_CC_FLAGS = -DMDEPKG_NDEBUG
+
+[BuildOptions.ARM.EDKII.SEC, BuildOptions.ARM.EDKII.BASE]
+ # Avoid MOVT/MOVW instruction pairs in code that may end up in the PIE
+ # executable we build for the relocatable PrePi. They are not runtime
+ # relocatable in ELF.
+ *_CLANG35_*_CC_FLAGS = -mno-movt
+
+################################################################################
+#
+# Pcd Section - list of all EDK II PCD Entries defined by this Platform
+#
+################################################################################
+
+[PcdsFeatureFlag.common]
+ ## If TRUE, Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.
+ # It could be set FALSE to save size.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE
+ gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|FALSE
+
+[PcdsFixedAtBuild.common]
+ gArmPlatformTokenSpaceGuid.PcdCoreCount|1
+!if $(ARCH) == AARCH64
+ gArmTokenSpaceGuid.PcdVFPEnabled|1
+!endif
+
+ gArmPlatformTokenSpaceGuid.PcdCPUCoresStackBase|0x4007c000
+ gArmPlatformTokenSpaceGuid.PcdCPUCorePrimaryStackSize|0x4000
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x2000
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxAuthVariableSize|0x2800
+
+ # Size of the region used by UEFI in permanent memory (Reserved 64MB)
+ gArmPlatformTokenSpaceGuid.PcdSystemMemoryUefiRegionSize|0x04000000
+
+ #
+ # ARM Pcds
+ #
+ gArmTokenSpaceGuid.PcdArmUncachedMemoryMask|0x0000000040000000
+
+ ## Trustzone enable (to make the transition from EL3 to EL2 in ArmPlatformPkg/Sec)
+ gArmTokenSpaceGuid.PcdTrustzoneSupport|FALSE
+
+ #
+ # ARM PrimeCell
+ #
+
+ ## NS16550 compatible UART
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x3f215040
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|TRUE
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterStride|4
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate|500000000
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl|0x27
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialExtendedTxFifoSize|8
+ gEfiMdePkgTokenSpaceGuid.PcdUartDefaultBaudRate|115200
+
+ ## Default Terminal Type
+ ## 0-PCANSI, 1-VT100, 2-VT00+, 3-UTF8, 4-TTYTERM
+!if $(TTY_TERMINAL) == TRUE
+ gEfiMdePkgTokenSpaceGuid.PcdDefaultTerminalType|4
+!else
+ gEfiMdePkgTokenSpaceGuid.PcdDefaultTerminalType|1
+!endif
+
+ #
+ # ARM Architectural Timer
+ #
+ gArmTokenSpaceGuid.PcdArmArchTimerFreqInHz|19200000
+
+ gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|FALSE
+ gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0x21, 0xaa, 0x2c, 0x46, 0x14, 0x76, 0x03, 0x45, 0x83, 0x6e, 0x8a, 0xb6, 0xf4, 0x66, 0x23, 0x31 }
+ gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdShellFile|{ 0x83, 0xA5, 0x04, 0x7C, 0x3E, 0x9E, 0x1C, 0x4F, 0xAD, 0x65, 0xE0, 0x52, 0x68, 0xD0, 0xB4, 0xD1 }
+
+[PcdsPatchableInModule.common]
+ #
+ # This will be overridden in the code
+ #
+ gArmTokenSpaceGuid.PcdSystemMemoryBase|0x0
+ gArmTokenSpaceGuid.PcdSystemMemorySize|0x0
+
+ gArmTokenSpaceGuid.PcdFdBaseAddress|0x0
+ gArmTokenSpaceGuid.PcdFvBaseAddress|0x0
+
+ gArmVirtTokenSpaceGuid.PcdDeviceTreeInitialBaseAddress|0
+
+[PcdsFixedAtBuild.AARCH64]
+
+ #
+ # The maximum physical I/O addressability of the processor, set with
+ # BuildCpuHob().
+ #
+ gEmbeddedTokenSpaceGuid.PcdPrePiCpuIoSize|16
+
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSetNxForStack|TRUE
+
+ # KVM limits it IPA space to 40 bits (1 TB), so there is no need to
+ # support anything bigger, even if the host hardware does
+ gEmbeddedTokenSpaceGuid.PcdPrePiCpuMemorySize|40
+
+ gEfiMdePkgTokenSpaceGuid.PcdPlatformBootTimeOut|3
+
+[PcdsDynamicDefault.common]
+ #
+ # Set video resolution for boot options and for text setup.
+ # PlatformDxe can set the former at runtime.
+ #
+ gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution|800
+ gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution|600
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoHorizontalResolution|640
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoVerticalResolution|480
+
+################################################################################
+#
+# Components Section - list of all EDK II Modules needed by this Platform
+#
+################################################################################
+[Components.common]
+ #
+ # PEI Phase modules
+ #
+ ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf {
+ <LibraryClasses>
+ ExtractGuidedSectionLib|EmbeddedPkg/Library/PrePiExtractGuidedSectionLib/PrePiExtractGuidedSectionLib.inf
+ LzmaDecompressLib|MdeModulePkg/Library/LzmaCustomDecompressLib/LzmaCustomDecompressLib.inf
+ PrePiLib|EmbeddedPkg/Library/PrePiLib/PrePiLib.inf
+ HobLib|EmbeddedPkg/Library/PrePiHobLib/PrePiHobLib.inf
+ PrePiHobListPointerLib|ArmPlatformPkg/Library/PrePiHobListPointerLib/PrePiHobListPointerLib.inf
+ MemoryAllocationLib|EmbeddedPkg/Library/PrePiMemoryAllocationLib/PrePiMemoryAllocationLib.inf
+ }
+
+ #
+ # DXE
+ #
+ MdeModulePkg/Core/Dxe/DxeMain.inf {
+ <LibraryClasses>
+ NULL|MdeModulePkg/Library/DxeCrc32GuidedSectionExtractLib/DxeCrc32GuidedSectionExtractLib.inf
+ }
+ MdeModulePkg/Universal/PCD/Dxe/Pcd.inf {
+ <LibraryClasses>
+ PcdLib|MdePkg/Library/BasePcdLibNull/BasePcdLibNull.inf
+ }
+ ArmVirtPkg/FdtClientDxe/FdtClientDxe.inf
+
+ #
+ # Architectural Protocols
+ #
+ ArmPkg/Drivers/CpuDxe/CpuDxe.inf
+ MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
+ MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf
+# MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf {
+# <LibraryClasses>
+# NULL|MdeModulePkg/Library/VarCheckUefiLib/VarCheckUefiLib.inf
+# }
+!if $(SECURE_BOOT_ENABLE) == TRUE
+ MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf {
+ <LibraryClasses>
+ NULL|SecurityPkg/Library/DxeImageVerificationLib/DxeImageVerificationLib.inf
+ }
+ SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigDxe.inf
+!else
+ MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
+!endif
+ MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
+ MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
+ MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
+ #EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
+ EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
+
+ MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
+ MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
+ MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
+ MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
+ MdeModulePkg/Universal/SerialDxe/SerialDxe.inf
+
+ MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
+
+ OpenPlatformPkg/Platforms/RaspberryPi/Drivers/Bcm2836InterruptDxe/Bcm2836InterruptDxe.inf
+ ArmPkg/Drivers/TimerDxe/TimerDxe.inf
+ MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
+
+ #
+ # FAT filesystem + GPT/MBR partitioning
+ #
+ MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
+ MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
+ MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
+ FatPkg/EnhancedFatDxe/Fat.inf
+
+ #
+ # Bds
+ #
+ MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
+ MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
+ MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
+ MdeModulePkg/Universal/DriverHealthManagerDxe/DriverHealthManagerDxe.inf
+ MdeModulePkg/Universal/BdsDxe/BdsDxe.inf
+ MdeModulePkg/Logo/LogoDxe.inf
+ MdeModulePkg/Application/UiApp/UiApp.inf {
+ <LibraryClasses>
+ NULL|MdeModulePkg/Library/DeviceManagerUiLib/DeviceManagerUiLib.inf
+ NULL|MdeModulePkg/Library/BootManagerUiLib/BootManagerUiLib.inf
+ NULL|MdeModulePkg/Library/BootMaintenanceManagerUiLib/BootMaintenanceManagerUiLib.inf
+ }
+
+ #
+ # SCSI Bus and Disk Driver
+ #
+ MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf
+ MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
+
+ #
+ # USB Support
+ #
+ MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf
+ MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
+ MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.inf
+
+ #
+ # SD/MMC support
+ #
+ OpenPlatformPkg/Platforms/RaspberryPi/Drivers/RaspberryPiPlatformDxe/RaspberryPiPlatformDxe.inf
+ MdeModulePkg/Bus/Pci/NonDiscoverablePciDeviceDxe/NonDiscoverablePciDeviceDxe.inf
+ MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHcDxe.inf
+ MdeModulePkg/Bus/Sd/SdDxe/SdDxe.inf
+ MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.inf
+
+[Components.common]
+ #
+ # Networking stack
+ #
+ MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf
+ MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf
+ MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf
+ MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf
+ MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf
+ MdeModulePkg/Universal/Network/VlanConfigDxe/VlanConfigDxe.inf
+ MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf
+ MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf
+ MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf
+ MdeModulePkg/Universal/Network/UefiPxeBcDxe/UefiPxeBcDxe.inf
+ MdeModulePkg/Universal/Network/IScsiDxe/IScsiDxe.inf
+
+ #
+ # UEFI application (Shell Embedded Boot Loader)
+ #
+ ShellPkg/Application/Shell/Shell.inf {
+ <LibraryClasses>
+ ShellCommandLib|ShellPkg/Library/UefiShellCommandLib/UefiShellCommandLib.inf
+ NULL|ShellPkg/Library/UefiShellLevel2CommandsLib/UefiShellLevel2CommandsLib.inf
+ NULL|ShellPkg/Library/UefiShellLevel1CommandsLib/UefiShellLevel1CommandsLib.inf
+ NULL|ShellPkg/Library/UefiShellLevel3CommandsLib/UefiShellLevel3CommandsLib.inf
+ NULL|ShellPkg/Library/UefiShellDriver1CommandsLib/UefiShellDriver1CommandsLib.inf
+ NULL|ShellPkg/Library/UefiShellDebug1CommandsLib/UefiShellDebug1CommandsLib.inf
+ NULL|ShellPkg/Library/UefiShellInstall1CommandsLib/UefiShellInstall1CommandsLib.inf
+ NULL|ShellPkg/Library/UefiShellNetwork1CommandsLib/UefiShellNetwork1CommandsLib.inf
+ NULL|ShellPkg/Library/UefiShellTftpCommandLib/UefiShellTftpCommandLib.inf
+ HandleParsingLib|ShellPkg/Library/UefiHandleParsingLib/UefiHandleParsingLib.inf
+ PrintLib|MdePkg/Library/BasePrintLib/BasePrintLib.inf
+ BcfgCommandLib|ShellPkg/Library/UefiShellBcfgCommandLib/UefiShellBcfgCommandLib.inf
+
+ <PcdsFixedAtBuild>
+ gEfiMdePkgTokenSpaceGuid.PcdDebugPropertyMask|0xFF
+ gEfiShellPkgTokenSpaceGuid.PcdShellLibAutoInitialize|FALSE
+ gEfiMdePkgTokenSpaceGuid.PcdUefiLibMaxPrintBufferSize|8000
+ }
+
+
+ EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf {
+ <LibraryClasses>
+ RealTimeClockLib|ArmVirtPkg/Library/XenRealTimeClockLib/XenRealTimeClockLib.inf
+ }
+ EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf {
+ <LibraryClasses>
+ EfiResetSystemLib|OpenPlatformPkg/Platforms/RaspberryPi/Library/RaspberryPiResetSystemLib/RaspberryPiResetSystemLib.inf
+ }
diff --git a/Platforms/RaspberryPi/RaspberryPi.fdf b/Platforms/RaspberryPi/RaspberryPi.fdf
new file mode 100644
index 000000000000..5ba8a8004f06
--- /dev/null
+++ b/Platforms/RaspberryPi/RaspberryPi.fdf
@@ -0,0 +1,365 @@
+#
+# Copyright (c) 2011-2015, ARM Limited. All rights reserved.
+# Copyright (c) 2014, Linaro Limited. All rights reserved.
+# Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.
+#
+# This program and the accompanying materials
+# are licensed and made available under the terms and conditions of the BSD License
+# which accompanies this distribution. The full text of the license may be found at
+# http://opensource.org/licenses/bsd-license.php
+#
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+#
+
+################################################################################
+#
+# FD Section
+# The [FD] Section is made up of the definition statements and a
+# description of what goes into the Flash Device Image. Each FD section
+# defines one flash "device" image. A flash device image may be one of
+# the following: Removable media bootable image (like a boot floppy
+# image,) an Option ROM image (that would be "flashed" into an add-in
+# card,) a System "Flash" image (that would be burned into a system's
+# flash) or an Update ("Capsule") image that will be used to update and
+# existing system flash.
+#
+################################################################################
+
+[FD.RPI_EFI]
+BaseAddress = 0x00000000|gArmTokenSpaceGuid.PcdFdBaseAddress
+Size = 0x00200000|gArmTokenSpaceGuid.PcdFdSize
+ErasePolarity = 1
+
+BlockSize = 0x00001000
+NumBlocks = 0x200
+
+################################################################################
+#
+# Following are lists of FD Region layout which correspond to the locations of different
+# images within the flash device.
+#
+# Regions must be defined in ascending order and may not overlap.
+#
+# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by
+# the pipe "|" character, followed by the size of the region, also in hex with the leading
+# "0x" characters. Like:
+# Offset|Size
+# PcdOffsetCName|PcdSizeCName
+# RegionType <FV, DATA, or FILE>
+#
+################################################################################
+
+#
+# Implement the Linux kernel header layout so that the loader will identify
+# it as something bootable, and execute it with a FDT pointer in x0 or r2.
+# This area will be reused to store a copy of the FDT so round it up to 32 KB.
+#
+0x00000000|0x00008000
+DATA = {
+!if $(ARCH) == AARCH64
+ 0x01, 0x00, 0x00, 0x10, # code0: adr x1, .
+ 0xff, 0x1f, 0x00, 0x14, # code1: b 0x8000
+ 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, # text_offset: 512 KB
+ 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, # image_size: 2 MB
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # flags
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # res2
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # res3
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, # res4
+ 0x41, 0x52, 0x4d, 0x64, # magic: "ARM\x64"
+ 0x00, 0x00, 0x00, 0x00 # res5
+!else
+ 0x08, 0x10, 0x4f, 0xe2, # adr r1, .
+ 0x02, 0x00, 0xa0, 0xe1, # mov r0, r2 (DTB)
+ 0x00, 0x00, 0xa0, 0xe1, # nop
+ 0x00, 0x00, 0xa0, 0xe1, # nop
+ 0x00, 0x00, 0xa0, 0xe1, # nop
+ 0x00, 0x00, 0xa0, 0xe1, # nop
+ 0x00, 0x00, 0xa0, 0xe1, # nop
+ 0x00, 0x00, 0xa0, 0xe1, # nop
+
+ 0xf6, 0x1f, 0x00, 0xea, # b 0x8000
+ 0x18, 0x28, 0x6f, 0x01, # magic
+ 0x00, 0x00, 0x00, 0x00, # start
+ 0x00, 0x00, 0x20, 0x00, # image size: 2 MB
+ 0x01, 0x02, 0x03, 0x04 # endiannness flag
+!endif
+}
+
+0x00008000|0x001f8000
+gArmTokenSpaceGuid.PcdFvBaseAddress|gArmTokenSpaceGuid.PcdFvSize
+FV = FVMAIN_COMPACT
+
+################################################################################
+#
+# FV Section
+#
+# [FV] section is used to define what components or modules are placed within a flash
+# device file. This section also defines order the components and modules are positioned
+# within the image. The [FV] section consists of define statements, set statements and
+# module statements.
+#
+################################################################################
+
+[FV.FvMain]
+FvNameGuid = 9a15aa37-d555-4a4e-b541-86391ff68164
+BlockSize = 0x40
+NumBlocks = 0 # This FV gets compressed so make it just big enough
+FvAlignment = 16 # FV alignment and FV attributes setting.
+ERASE_POLARITY = 1
+MEMORY_MAPPED = TRUE
+STICKY_WRITE = TRUE
+LOCK_CAP = TRUE
+LOCK_STATUS = TRUE
+WRITE_DISABLED_CAP = TRUE
+WRITE_ENABLED_CAP = TRUE
+WRITE_STATUS = TRUE
+WRITE_LOCK_CAP = TRUE
+WRITE_LOCK_STATUS = TRUE
+READ_DISABLED_CAP = TRUE
+READ_ENABLED_CAP = TRUE
+READ_STATUS = TRUE
+READ_LOCK_CAP = TRUE
+READ_LOCK_STATUS = TRUE
+
+ INF MdeModulePkg/Core/Dxe/DxeMain.inf
+ INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf
+ INF ArmVirtPkg/FdtClientDxe/FdtClientDxe.inf
+
+ #
+ # PI DXE Drivers producing Architectural Protocols (EFI Services)
+ #
+ INF ArmPkg/Drivers/CpuDxe/CpuDxe.inf
+ INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf
+ INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf
+ INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf
+ INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf
+ INF MdeModulePkg/Universal/Variable/EmuRuntimeDxe/EmuVariableRuntimeDxe.inf
+# INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf
+!if $(SECURE_BOOT_ENABLE) == TRUE
+ INF SecurityPkg/VariableAuthenticated/SecureBootConfigDxe/SecureBootConfigDxe.inf
+!endif
+ INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf
+ #INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
+ #INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
+ INF EmbeddedPkg/MetronomeDxe/MetronomeDxe.inf
+ INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf
+
+ #
+ # Multiple Console IO support
+ #
+ INF MdeModulePkg/Universal/Console/ConPlatformDxe/ConPlatformDxe.inf
+ INF MdeModulePkg/Universal/Console/ConSplitterDxe/ConSplitterDxe.inf
+ INF MdeModulePkg/Universal/Console/GraphicsConsoleDxe/GraphicsConsoleDxe.inf
+ INF MdeModulePkg/Universal/Console/TerminalDxe/TerminalDxe.inf
+ INF MdeModulePkg/Universal/SerialDxe/SerialDxe.inf
+
+ INF OpenPlatformPkg/Platforms/RaspberryPi/Drivers/Bcm2836InterruptDxe/Bcm2836InterruptDxe.inf
+ INF ArmPkg/Drivers/TimerDxe/TimerDxe.inf
+ INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf
+
+ #
+ # FAT filesystem + GPT/MBR partitioning
+ #
+ INF MdeModulePkg/Universal/Disk/DiskIoDxe/DiskIoDxe.inf
+ INF MdeModulePkg/Universal/Disk/PartitionDxe/PartitionDxe.inf
+ INF FatPkg/EnhancedFatDxe/Fat.inf
+ INF MdeModulePkg/Universal/Disk/UnicodeCollation/EnglishDxe/EnglishDxe.inf
+
+ #
+ # UEFI application (Shell Embedded Boot Loader)
+ #
+ INF ShellPkg/Application/Shell/Shell.inf
+
+ #
+ # Bds
+ #
+ INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf
+ INF MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf
+ INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf
+ INF MdeModulePkg/Universal/DriverHealthManagerDxe/DriverHealthManagerDxe.inf
+ INF MdeModulePkg/Universal/BdsDxe/BdsDxe.inf
+ INF MdeModulePkg/Application/UiApp/UiApp.inf
+
+ #
+ # Networking stack
+ #
+ INF MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf
+ INF MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf
+ INF MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf
+ INF MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf
+ INF MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf
+ INF MdeModulePkg/Universal/Network/VlanConfigDxe/VlanConfigDxe.inf
+ INF MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf
+ INF MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf
+ INF MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf
+ INF MdeModulePkg/Universal/Network/UefiPxeBcDxe/UefiPxeBcDxe.inf
+ INF MdeModulePkg/Universal/Network/IScsiDxe/IScsiDxe.inf
+
+ #
+ # SCSI Bus and Disk Driver
+ #
+ INF MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBusDxe.inf
+ INF MdeModulePkg/Bus/Scsi/ScsiDiskDxe/ScsiDiskDxe.inf
+
+ #
+ # USB Support
+ #
+ INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf
+ INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf
+ INF MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.inf
+
+ #
+ # SD/MMC support
+ #
+ INF OpenPlatformPkg/Platforms/RaspberryPi/Drivers/RaspberryPiPlatformDxe/RaspberryPiPlatformDxe.inf
+ INF MdeModulePkg/Bus/Pci/NonDiscoverablePciDeviceDxe/NonDiscoverablePciDeviceDxe.inf
+ INF MdeModulePkg/Bus/Pci/SdMmcPciHcDxe/SdMmcPciHcDxe.inf
+ INF MdeModulePkg/Bus/Sd/SdDxe/SdDxe.inf
+ INF MdeModulePkg/Bus/Sd/EmmcDxe/EmmcDxe.inf
+
+ #
+ # TianoCore logo (splash screen)
+ #
+ INF MdeModulePkg/Logo/LogoDxe.inf
+
+ INF EmbeddedPkg/RealTimeClockRuntimeDxe/RealTimeClockRuntimeDxe.inf
+ INF EmbeddedPkg/ResetRuntimeDxe/ResetRuntimeDxe.inf
+
+[FV.FVMAIN_COMPACT]
+FvAlignment = 16
+ERASE_POLARITY = 1
+MEMORY_MAPPED = TRUE
+STICKY_WRITE = TRUE
+LOCK_CAP = TRUE
+LOCK_STATUS = TRUE
+WRITE_DISABLED_CAP = TRUE
+WRITE_ENABLED_CAP = TRUE
+WRITE_STATUS = TRUE
+WRITE_LOCK_CAP = TRUE
+WRITE_LOCK_STATUS = TRUE
+READ_DISABLED_CAP = TRUE
+READ_ENABLED_CAP = TRUE
+READ_STATUS = TRUE
+READ_LOCK_CAP = TRUE
+READ_LOCK_STATUS = TRUE
+
+ INF ArmVirtPkg/PrePi/ArmVirtPrePiUniCoreRelocatable.inf
+
+ FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {
+ SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {
+ SECTION FV_IMAGE = FVMAIN
+ }
+ }
+
+################################################################################
+#
+# Rules are use with the [FV] section's module INF type to define
+# how an FFS file is created for a given INF file. The following Rule are the default
+# rules for the different module type. User can add the customized rules to define the
+# content of the FFS file.
+#
+################################################################################
+
+
+############################################################################
+# Example of a DXE_DRIVER FFS file with a Checksum encapsulation section #
+############################################################################
+#
+#[Rule.Common.DXE_DRIVER]
+# FILE DRIVER = $(NAMED_GUID) {
+# DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+# COMPRESS PI_STD {
+# GUIDED {
+# PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+# UI STRING="$(MODULE_NAME)" Optional
+# VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
+# }
+# }
+# }
+#
+############################################################################
+
+[Rule.Common.SEC]
+ FILE SEC = $(NAMED_GUID) RELOCS_STRIPPED FIXED {
+ TE TE Align = Auto $(INF_OUTPUT)/$(MODULE_NAME).efi
+ }
+
+[Rule.Common.PEI_CORE]
+ FILE PEI_CORE = $(NAMED_GUID) FIXED {
+ TE TE Align = Auto $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING ="$(MODULE_NAME)" Optional
+ }
+
+[Rule.Common.PEIM]
+ FILE PEIM = $(NAMED_GUID) FIXED {
+ PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+ TE TE Align = Auto $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING="$(MODULE_NAME)" Optional
+ }
+
+[Rule.Common.PEIM.TIANOCOMPRESSED]
+ FILE PEIM = $(NAMED_GUID) DEBUG_MYTOOLS_IA32 {
+ PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+ GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING="$(MODULE_NAME)" Optional
+ }
+ }
+
+[Rule.Common.DXE_CORE]
+ FILE DXE_CORE = $(NAMED_GUID) {
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING="$(MODULE_NAME)" Optional
+ }
+
+[Rule.Common.UEFI_DRIVER]
+ FILE DRIVER = $(NAMED_GUID) {
+ DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING="$(MODULE_NAME)" Optional
+ }
+
+[Rule.Common.DXE_DRIVER]
+ FILE DRIVER = $(NAMED_GUID) {
+ DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING="$(MODULE_NAME)" Optional
+ RAW ACPI Optional |.acpi
+ RAW ASL Optional |.aml
+ }
+
+[Rule.Common.DXE_RUNTIME_DRIVER]
+ FILE DRIVER = $(NAMED_GUID) {
+ DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ UI STRING="$(MODULE_NAME)" Optional
+ }
+
+[Rule.Common.UEFI_APPLICATION]
+ FILE APPLICATION = $(NAMED_GUID) {
+ UI STRING ="$(MODULE_NAME)" Optional
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi
+ }
+
+[Rule.Common.UEFI_DRIVER.BINARY]
+ FILE DRIVER = $(NAMED_GUID) {
+ DXE_DEPEX DXE_DEPEX Optional |.depex
+ PE32 PE32 |.efi
+ UI STRING="$(MODULE_NAME)" Optional
+ VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
+ }
+
+[Rule.Common.UEFI_APPLICATION.BINARY]
+ FILE APPLICATION = $(NAMED_GUID) {
+ PE32 PE32 |.efi
+ UI STRING="$(MODULE_NAME)" Optional
+ VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)
+ }
+
+[Rule.Common.USER_DEFINED.ACPITABLE]
+ FILE FREEFORM = $(NAMED_GUID) {
+ RAW ACPI |.acpi
+ RAW ASL |.aml
+ UI STRING="$(MODULE_NAME)" Optional
+ }
--
2.7.4
9 years
- 1
- 0
SMBIOS/DMI data creation
by Shaveta Leekha
Hi,
I was adding SMBIOS DMI data in UEFI for our ARM64 platform.
One patch that I referred is of ARM JUNO platform:
ArmPlatformPkg/ArmJunoPkg: Create SMBIOS/DMI data for Juno
In it, almost all SMBIOS table entries/structures are populated statically with information.
Is it preliminary support? can we fill most of the information like:
Memory module information
Cache related info etc by reading from registers or from system at run time instead of filling it statically?
Any views?
Thanks and Regards,
Shaveta
9 years
- 2
- 1
[PATCH v6 0/4] arm64, xen: add xen_boot support into grup-mkconfig
by fu.wei＠linaro.org
From: Fu Wei <fu.wei(a)linaro.org>
This patchset add xen_boot support into grup-mkconfig for
generating xen boot entrances automatically
Also update the docs/grub.texi for new xen_boot commands.
This patchset has been tested on Foudation model with a bug fix:
http://lists.gnu.org/archive/html/grub-devel/2016-02/msg00205.html
ChangeLog:
v6: http://lists.gnu.org/archive/html/grub-devel/2016-07/
Fix Coding style of util/grub.d/20_linux_xen.in, use soft tab.
v5: http://lists.gnu.org/archive/html/grub-devel/2016-07/msg00008.html
Update the introduction of xen_module commands in docs/grub.texi,
according to the suggestion from Julien Grall
v4: http://lists.gnu.org/archive/html/grub-devel/2016-05/
according to the XSM loading mechanism of Xen(upstreamed),
update the introduction of xen_module commands in docs/grub.texi
v3: http://lists.gnu.org/archive/html/grub-devel/2016-02/msg00314.html
reorder the patches
update the introduction of xen_module commands in docs/grub.texi
v2: http://lists.gnu.org/archive/html/grub-devel/2016-02/msg00282.html
add "--nounzip" option support in xen_module
use "feature_xen_boot" instead of "grub_xen_boot"
update the introduction of xen boot commands in docs/grub.texi
v1 :first upstream patchset:
http://lists.gnu.org/archive/html/grub-devel/2016-02/msg00264.html
Fu Wei (4):
i386,xen: Add xen_hypervisor and xen_module aliases for i386
arm64: add "--nounzip" option support in xen_module command
* util/grub.d/20_linux_xen.in: Add xen_boot command support
arm64: update the introduction of xen boot commands in docs/grub.texi
docs/grub.texi | 32 +++++++++-----------------------
grub-core/loader/arm64/xen_boot.c | 17 +++++++++++++++++
grub-core/loader/i386/xen.c | 7 +++++++
grub-core/normal/main.c | 2 +-
util/grub.d/20_linux_xen.in | 13 ++++++++++---
5 files changed, 44 insertions(+), 27 deletions(-)
--
2.5.5
9 years, 1 month
- 4
- 11
[PATCH 0/7] Armada 7040 PciEmulation, SATA, USB
by Marcin Wojtas
Hi,
I send a patchset adding support for PciEmulation driver, based on similar
solution for Omap35xx platform. It allows for enabling PCI drivers for
platform devices, such as XHCI, AHCI, SDHCI, of which first two
are enclosed. Although it's 7 patches, only first one comprise of
bigger amount of code and it's fairly not complicated.
The patches can be found in the github:
https://github.com/MarvellEmbeddedProcessors/edk2-open-platform/commits/opp…
I'm looking forward to your comments or remarks.
Best regards,
Marcin
Jan Dąbroś (7):
Platforms/Marvell: Add PciEmulation driver
Platforms/Marvell: Enable PciEmulation driver for Armada70x0 platform
Platforms/Marvell: Enable USB stack for Armada70x0 platform
Platforms/Marvell: Enable two xHCI ports for Armada70x0 board
Platforms/Marvell: Enable SATA stack for Armada70x0 platform
Platforms/Marvell: Add support for SATA devices in PciEmulation
Platforms/Marvell: Enable SATA port for Armada70x0 board
.../Marvell/PortingGuide/PciEmulation.txt | 53 ++
Documentation/Marvell/PortingGuide/Sata.txt | 16 +
Platforms/Marvell/Armada/Armada.dsc.inc | 17 +
Platforms/Marvell/Armada/Armada70x0.dsc | 18 +
Platforms/Marvell/Armada/Armada70x0.fdf | 17 +
Platforms/Marvell/Marvell.dec | 17 +-
Platforms/Marvell/PciEmulation/PciEmulation.c | 790 +++++++++++++++++++++
Platforms/Marvell/PciEmulation/PciEmulation.h | 277 ++++++++
Platforms/Marvell/PciEmulation/PciEmulation.inf | 67 ++
Platforms/Marvell/PciEmulation/PciRootBridgeIo.c | 314 ++++++++
10 files changed, 1583 insertions(+), 3 deletions(-)
create mode 100644 Documentation/Marvell/PortingGuide/PciEmulation.txt
create mode 100644 Documentation/Marvell/PortingGuide/Sata.txt
create mode 100644 Platforms/Marvell/PciEmulation/PciEmulation.c
create mode 100644 Platforms/Marvell/PciEmulation/PciEmulation.h
create mode 100644 Platforms/Marvell/PciEmulation/PciEmulation.inf
create mode 100644 Platforms/Marvell/PciEmulation/PciRootBridgeIo.c
--
1.8.3.1
9 years, 1 month
- 4
- 19
[PATCH 0/8] Platforms/AMD/Styx: move to generic SATA driver
by Ard Biesheuvel
This series replaces the monolithic SataControllerDxe driver, which was
copied from another platform and then expanded to add platform specific
initialization routines and PCI I/O emulation, and instead switches to
a simple platform SATA driver, which exposes the SATA IP blocks via
a pair of UEFI driver model handles, and relegates all further handling
to the generic platform PCI I/O driver, and the generic SATA driver.
This not only allows us to remove a fair chunk of (copied and unmaintained)
code, it also makes it possible to easily use both SATA controllers at the
same time. On Overdrive B1, all 14 SATA ports are available to UEFI and to
the OS (with the caveat that the kernel fails to bring up the second controller
in ACPI mode, but this looks like a kernel issue not a UEFI issue)
Patch #1 is an unrelated but useful patch that re-enables the descriptive
names of drivers. It is unclear why this was disabled in the first place.
Patch #2 creates a new StyxSataPlatformDxe driver containing the existing
SATA init code, and some simple calls to instantiate the device handles
that identify the controllers as AHCI compatible and suitable for being
driven by the PCI based generic driver
Patch #3 - #5 switch Overdrive, Cello and SoftIron 1000 to the new driver.
Patch #6 enables the second AHCI ACPI node if any ports are enabled on
controller #2
Patch #7 enables the second AHCI DT node if any ports are enabled on
controller #2
Patch #8 removes the old SataControllerDxe now that it is no longer used.
Note that this series relies on patches that are not yet in mainline
Tianocore. Those patches can be found here:
https://git.linaro.org/people/ard.biesheuvel/uefi-next.git/log/?h=pciio-emu
Ard Biesheuvel (8):
Platforms/AMD/Styx: don't disable component names and driver
diagnostics
Platforms/AMD/Styx: split off SATA init code into StyxSataPlatformDxe
driver
Platforms/AMD/Overdrive: switch to generic AHCI driver
Platforms/AMD/Cello: switch to generic AHCI driver
Platforms/AMD/Overdrive1000: switch to generic AHCI driver
Platforms/AMD/Styx/AcpiTables: enable second SATA controller
Platforms/AMD/Styx/FdtDxe: enable second SATA controller
Platforms/AMD/Styx: remove SataControllerDxe
Platforms/AMD/Styx/AcpiTables/AcpiTables.inf | 1 +
Platforms/AMD/Styx/AcpiTables/Dsdt.c | 9 +-
Platforms/AMD/Styx/CelloBoard/CelloBoard.dsc | 16 +-
Platforms/AMD/Styx/CelloBoard/CelloBoard.fdf | 4 +-
Platforms/AMD/Styx/Drivers/FdtDxe/BdsLinuxFdt.c | 7 +-
Platforms/AMD/Styx/Drivers/FdtDxe/FdtDxe.inf | 1 +
Platforms/AMD/Styx/Drivers/SataControllerDxe/ComponentName.c | 178 ----
Platforms/AMD/Styx/Drivers/SataControllerDxe/InitController.c | 172 ----
Platforms/AMD/Styx/Drivers/SataControllerDxe/PciEmulation.c | 442 ---------
Platforms/AMD/Styx/Drivers/SataControllerDxe/PciEmulation.h | 289 ------
Platforms/AMD/Styx/Drivers/SataControllerDxe/PciRootBridgeIo.c | 307 ------
Platforms/AMD/Styx/Drivers/SataControllerDxe/SataController.c | 1027 --------------------
Platforms/AMD/Styx/Drivers/SataControllerDxe/SataController.h | 555 -----------
Platforms/AMD/Styx/Drivers/StyxSataPlatformDxe/InitController.c | 181 ++++
Platforms/AMD/Styx/Drivers/{SataControllerDxe => StyxSataPlatformDxe}/SataRegisters.h | 0
Platforms/AMD/Styx/Drivers/{SataControllerDxe/SataControllerDxe.inf => StyxSataPlatformDxe/StyxSataPlatformDxe.inf} | 42 +-
Platforms/AMD/Styx/Overdrive1000Board/Overdrive1000Board.dsc | 12 +-
Platforms/AMD/Styx/Overdrive1000Board/Overdrive1000Board.fdf | 4 +-
Platforms/AMD/Styx/OverdriveBoard/OverdriveBoard.dsc | 16 +-
Platforms/AMD/Styx/OverdriveBoard/OverdriveBoard.fdf | 4 +-
20 files changed, 224 insertions(+), 3043 deletions(-)
delete mode 100644 Platforms/AMD/Styx/Drivers/SataControllerDxe/ComponentName.c
delete mode 100644 Platforms/AMD/Styx/Drivers/SataControllerDxe/InitController.c
delete mode 100644 Platforms/AMD/Styx/Drivers/SataControllerDxe/PciEmulation.c
delete mode 100644 Platforms/AMD/Styx/Drivers/SataControllerDxe/PciEmulation.h
delete mode 100644 Platforms/AMD/Styx/Drivers/SataControllerDxe/PciRootBridgeIo.c
delete mode 100644 Platforms/AMD/Styx/Drivers/SataControllerDxe/SataController.c
delete mode 100644 Platforms/AMD/Styx/Drivers/SataControllerDxe/SataController.h
create mode 100644 Platforms/AMD/Styx/Drivers/StyxSataPlatformDxe/InitController.c
rename Platforms/AMD/Styx/Drivers/{SataControllerDxe => StyxSataPlatformDxe}/SataRegisters.h (100%)
rename Platforms/AMD/Styx/Drivers/{SataControllerDxe/SataControllerDxe.inf => StyxSataPlatformDxe/StyxSataPlatformDxe.inf} (59%)
--
2.7.4
9 years, 1 month
- 2
- 19
GRUB ARM Xen patches
by Daniel Kiper
Hi,
Julien asked me to apply some GRUB ARM Xen patches. On the basis of
his requested I identified following patch(es):
- [PATCH] arm64: xen_boot: Fix xen boot using Grub on AARCH64
https://lists.gnu.org/archive/html/grub-devel/2016-02/msg00205.html
- [PATCH v6 0/4] arm64,xen: add xen_boot support into grup-mkconfig
http://lists.gnu.org/archive/html/grub-devel/2016-07/msg00034.html
Is this list complete or am I missing something?
I have some concerns and I wish to be sure that I comment relevant
patch(es) and do not miss other required GRUB ARM Xen pieces.
Daniel
9 years, 1 month
- 2
- 1