On Thursday 26 February 2015 05:23 PM, Narendra Kumar wrote:
For panda-board we need to have empty sd card(with out anypartitioning) for deploying image using json file, currently I am using telnet to connect to board so apart from connectin_command do we need to specify any more command related to image installation and boot commands?
You can see the panda device configuration used in v.l.o here - https://git.linaro.org/lava/lava-lab.git/blob/14f6fbacafe1819c8a0c51e9f2603f...
For panda-es boards the configuration is here - https://git.linaro.org/lava/lava-lab.git/blob/14f6fbacafe1819c8a0c51e9f2603f...
Based on your board type ie., panda-es or panda, choose either of the configuration as reference.
PS: Keeping LAVA mailing list in CC.
Thank You.
On Wed, Feb 25, 2015 at 6:30 PM, Senthil Kumaran <senthil.kumaran@linaro.org mailto:senthil.kumaran@linaro.org> wrote:
On Wednesday 25 February 2015 06:27 PM, Narendra Kumar wrote: > I have changed the LAVA_SERVER_IP in lava-dispatcher.conf now it started > working, I hope there won't be any more issues. Once it successfully > finished I will let you know. Thank you very much for quick response. Great to know that! Thank You. -- Senthil Kumaran http://www.stylesen.org/ http://www.sasenthilkumaran.com/-- tree pinePlease consider the environment before printing this e-mail
Thanks & Regards Narendra Kumar Chepuri (+917353049544)
On Thursday 26 February 2015 05:31 PM, Senthil Kumaran wrote:
On Thursday 26 February 2015 05:23 PM, Narendra Kumar wrote:
For panda-board we need to have empty sd card(with out anypartitioning) for deploying image using json file, currently I am using
You must flash a master image relevant to panda board on the sd card. Once you have flashed the master image, boot the board once with the master image, where it will setup the partition layout. Then you can use the panda device on LAVA for testing. You can find master images here - http://images.validation.linaro.org/lava-masters/
Alternatively you can also use a dynamic-master image without loading anything on sd card. You can get dynamic master images here http://images.validation.linaro.org/lava-dynamic-masters/ and the related documentation is here - https://validation.linaro.org/static/docs/lava-image-creation.html (search for dynamic master.
I haven't tried dynamic master images in panda though.
Thank You.
telnet to connect to board so apart from connectin_command do we need to specify any more command related to image installation and boot commands?
You can see the panda device configuration used in v.l.o here - https://git.linaro.org/lava/lava-lab.git/blob/14f6fbacafe1819c8a0c51e9f2603f...
For panda-es boards the configuration is here - https://git.linaro.org/lava/lava-lab.git/blob/14f6fbacafe1819c8a0c51e9f2603f...
Based on your board type ie., panda-es or panda, choose either of the configuration as reference.
PS: Keeping LAVA mailing list in CC.
Thank You.
On Wed, Feb 25, 2015 at 6:30 PM, Senthil Kumaran <senthil.kumaran@linaro.org mailto:senthil.kumaran@linaro.org> wrote:
On Wednesday 25 February 2015 06:27 PM, Narendra Kumar wrote: > I have changed the LAVA_SERVER_IP in lava-dispatcher.conf now it started > working, I hope there won't be any more issues. Once it successfully > finished I will let you know. Thank you very much for quick response. Great to know that! Thank You. -- Senthil Kumaran http://www.stylesen.org/ http://www.sasenthilkumaran.com/-- tree pinePlease consider the environment before printing this e-mail
Thanks & Regards Narendra Kumar Chepuri (+917353049544)
Hi,
May I know about sdcard settings--->it should be empty and plugged in to board for deploying image or we need to create partitions and then we need to plug it to board?
On Thu, Feb 26, 2015 at 5:31 PM, Senthil Kumaran <senthil.kumaran@linaro.org
wrote:
On Thursday 26 February 2015 05:23 PM, Narendra Kumar wrote:
For panda-board we need to have empty sd card(with out anypartitioning) for deploying image using json file, currently I am using telnet to connect to board so apart from connectin_command do we need to specify any more command related to image installation and boot commands?
You can see the panda device configuration used in v.l.o here -
https://git.linaro.org/lava/lava-lab.git/blob/14f6fbacafe1819c8a0c51e9f2603f...
For panda-es boards the configuration is here -
https://git.linaro.org/lava/lava-lab.git/blob/14f6fbacafe1819c8a0c51e9f2603f...
Based on your board type ie., panda-es or panda, choose either of the configuration as reference.
PS: Keeping LAVA mailing list in CC.
Thank You.
On Wed, Feb 25, 2015 at 6:30 PM, Senthil Kumaran <senthil.kumaran@linaro.org mailto:senthil.kumaran@linaro.org> wrote:
On Wednesday 25 February 2015 06:27 PM, Narendra Kumar wrote: > I have changed the LAVA_SERVER_IP in lava-dispatcher.conf now itstarted
> working, I hope there won't be any more issues. Once itsuccessfully
> finished I will let you know. Thank you very much for quickresponse.
Great to know that! Thank You. -- Senthil Kumaran http://www.stylesen.org/ http://www.sasenthilkumaran.com/-- tree pinePlease consider the environment before printing this e-mail
Thanks & Regards Narendra Kumar Chepuri (+917353049544)
-- Senthil Kumaran http://www.stylesen.org/ http://www.sasenthilkumaran.com/
Hi senthil,
we need to only master images for testing? Using of images located at " https://releases.linaro.org/" is allowed?
On Thu, Feb 26, 2015 at 5:39 PM, Narendra Kumar < narendrakumar.chepuri@gmail.com> wrote:
Hi,
May I know about sdcard settings--->it should be empty and plugged in to board for deploying image or we need to create partitions and then we need to plug it to board?
On Thu, Feb 26, 2015 at 5:31 PM, Senthil Kumaran < senthil.kumaran@linaro.org> wrote:
On Thursday 26 February 2015 05:23 PM, Narendra Kumar wrote:
For panda-board we need to have empty sd card(with out anypartitioning) for deploying image using json file, currently I am using telnet to connect to board so apart from connectin_command do we need to specify any more command related to image installation and boot
commands?
You can see the panda device configuration used in v.l.o here -
https://git.linaro.org/lava/lava-lab.git/blob/14f6fbacafe1819c8a0c51e9f2603f...
For panda-es boards the configuration is here -
https://git.linaro.org/lava/lava-lab.git/blob/14f6fbacafe1819c8a0c51e9f2603f...
Based on your board type ie., panda-es or panda, choose either of the configuration as reference.
PS: Keeping LAVA mailing list in CC.
Thank You.
On Wed, Feb 25, 2015 at 6:30 PM, Senthil Kumaran <senthil.kumaran@linaro.org mailto:senthil.kumaran@linaro.org> wrote:
On Wednesday 25 February 2015 06:27 PM, Narendra Kumar wrote: > I have changed the LAVA_SERVER_IP in lava-dispatcher.conf now itstarted
> working, I hope there won't be any more issues. Once itsuccessfully
> finished I will let you know. Thank you very much for quickresponse.
Great to know that! Thank You. -- Senthil Kumaran http://www.stylesen.org/ http://www.sasenthilkumaran.com/-- tree pinePlease consider the environment before printing this e-mail
Thanks & Regards Narendra Kumar Chepuri (+917353049544)
-- Senthil Kumaran http://www.stylesen.org/ http://www.sasenthilkumaran.com/
-- [image: tree pine]Please consider the environment before printing this e-mail
Thanks & Regards Narendra Kumar Chepuri (+917353049544)
Hi Narendra,
On Thursday 26 February 2015 06:48 PM, Narendra Kumar wrote:
we need to only master images for testing? Using of images located at "https://releases.linaro.org/" is allowed?
Master image helps to leave the board in a useable state after each job run in LAVA. You can read about master images here - https://validation.linaro.org/static/docs/lava-image-creation.html?highlight... and here - https://git.linaro.org/lava/lava-master-image-scripts.git/blob_plain/HEAD:/R...
Test images are the images that you specify within the job JSON, on which you want your tests to get executed. These could be images from https://releases.linaro.org or elsewhere. These images will have the partition layout already setup by master images for deploying these images in device under test (DUT) that is connected with LAVA.
Thank You.
Hi Senthil,
I am getting some error while deploying image in panda. I am sharing log can you tell me what could be the issue.
ErrorMessage: Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. ser2net port 4000 device /dev/ttyS0 [115200 N81] (Debian GNU/Linux) Connection closed by foreign host. CriticalError: Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. ser2net port 4000 device /dev/ttyS0 [115200 N81] (Debian GNU/Linux) Connection closed by foreign host.
On Thu, Feb 26, 2015 at 7:10 PM, Senthil Kumaran <senthil.kumaran@linaro.org
wrote:
Hi Narendra,
On Thursday 26 February 2015 06:48 PM, Narendra Kumar wrote:
we need to only master images for testing? Using of images located at "https://releases.linaro.org/" is allowed?
Master image helps to leave the board in a useable state after each job run in LAVA. You can read about master images here - https://validation.linaro.org/static/docs/lava-image- creation.html?highlight=master%20image and here - https://git.linaro.org/lava/lava-master-image-scripts.git/ blob_plain/HEAD:/README
Test images are the images that you specify within the job JSON, on which you want your tests to get executed. These could be images from https://releases.linaro.org or elsewhere. These images will have the partition layout already setup by master images for deploying these images in device under test (DUT) that is connected with LAVA.
Thank You.
Senthil Kumaran http://www.stylesen.org/ http://www.sasenthilkumaran.com/
Hi Narendra,
That looks like you have another telnet connection to the board, or you haven't set up your serial console correctly.
Dave
Sent from my Aldis Lamp
On 27 Feb 2015, at 06:46, Narendra Kumar narendrakumar.chepuri@gmail.com wrote:
Hi Senthil,
I am getting some error while deploying image in panda. I am sharing log can you tell me what could be the issue.
ErrorMessage: Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. ser2net port 4000 device /dev/ttyS0 [115200 N81] (Debian GNU/Linux) Connection closed by foreign host. CriticalError: Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. ser2net port 4000 device /dev/ttyS0 [115200 N81] (Debian GNU/Linux) Connection closed by foreign host.
On Thu, Feb 26, 2015 at 7:10 PM, Senthil Kumaran senthil.kumaran@linaro.org wrote: Hi Narendra,
On Thursday 26 February 2015 06:48 PM, Narendra Kumar wrote: we need to only master images for testing? Using of images located at "https://releases.linaro.org/" is allowed?
Master image helps to leave the board in a useable state after each job run in LAVA. You can read about master images here - https://validation.linaro.org/static/docs/lava-image-creation.html?highlight... and here - https://git.linaro.org/lava/lava-master-image-scripts.git/blob_plain/HEAD:/R...
Test images are the images that you specify within the job JSON, on which you want your tests to get executed. These could be images from https://releases.linaro.org or elsewhere. These images will have the partition layout already setup by master images for deploying these images in device under test (DUT) that is connected with LAVA.
Thank You.
Senthil Kumaran http://www.stylesen.org/ http://www.sasenthilkumaran.com/
-- <image002.png>Please consider the environment before printing this e-mail
Thanks & Regards Narendra Kumar Chepuri (+917353049544) <job_56.log> <panda01.conf> <panda-basic-usb-test.json> _______________________________________________ linaro-validation mailing list linaro-validation@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-validation
Hi Dave,
I have only one telnet connection to board, where I configured to port 4000 using "telnet localhost 4000" command in my PC I am able to connect to board. The issue might be the restart command in panda01.conf "/usr/bin/pduclient --daemon localhost --hostname pdu --command reboot --port 05" where PDU port-05 is not configured to telnet port 4000, if this is the issue may I know how to configure PDU port to required telnet port.
On Fri, Feb 27, 2015 at 7:50 PM, Dave Pigott dave.pigott@linaro.org wrote:
Hi Narendra,
That looks like you have another telnet connection to the board, or you haven't set up your serial console correctly.
Dave
Sent from my Aldis Lamp
On 27 Feb 2015, at 06:46, Narendra Kumar narendrakumar.chepuri@gmail.com wrote:
Hi Senthil,
I am getting some error while deploying image in panda. I am sharing log can you tell me what could be the issue.
ErrorMessage: Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. ser2net port 4000 device /dev/ttyS0 [115200 N81] (Debian GNU/Linux) Connection closed by foreign host. CriticalError: Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. ser2net port 4000 device /dev/ttyS0 [115200 N81] (Debian GNU/Linux) Connection closed by foreign host.
On Thu, Feb 26, 2015 at 7:10 PM, Senthil Kumaran < senthil.kumaran@linaro.org> wrote:
Hi Narendra,
On Thursday 26 February 2015 06:48 PM, Narendra Kumar wrote:
we need to only master images for testing? Using of images located at "https://releases.linaro.org/" is allowed?
Master image helps to leave the board in a useable state after each job run in LAVA. You can read about master images here - https://validation.linaro.org/static/docs/lava-image- creation.html?highlight=master%20image and here - https://git.linaro.org/lava/lava-master-image-scripts.git/ blob_plain/HEAD:/README
Test images are the images that you specify within the job JSON, on which you want your tests to get executed. These could be images from https://releases.linaro.org or elsewhere. These images will have the partition layout already setup by master images for deploying these images in device under test (DUT) that is connected with LAVA.
Thank You.
Senthil Kumaran http://www.stylesen.org/ http://www.sasenthilkumaran.com/
-- <image002.png>Please consider the environment before printing this e-mail
Thanks & Regards Narendra Kumar Chepuri (+917353049544)
<job_56.log>
<panda01.conf>
<panda-basic-usb-test.json>
linaro-validation mailing list linaro-validation@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-validation
Hi Dave,
Is there any way to solve this without using PDU, like increasing the delay of for manual plugging and unplugging of power supply to board. If PDU is compulsory then which type of PDU can used because if we google for PDU different types of PDU's are there. for LAVA which of PDU can be used?
On Mon, Mar 2, 2015 at 3:02 PM, Narendra Kumar < narendrakumar.chepuri@gmail.com> wrote:
Hi Dave,
I have only one telnet connection to board, where Iconfigured to port 4000 using "telnet localhost 4000" command in my PC I am able to connect to board. The issue might be the restart command in panda01.conf "/usr/bin/pduclient --daemon localhost --hostname pdu --command reboot --port 05" where PDU port-05 is not configured to telnet port 4000, if this is the issue may I know how to configure PDU port to required telnet port.
On Fri, Feb 27, 2015 at 7:50 PM, Dave Pigott dave.pigott@linaro.org wrote:
Hi Narendra,
That looks like you have another telnet connection to the board, or you haven't set up your serial console correctly.
Dave
Sent from my Aldis Lamp
On 27 Feb 2015, at 06:46, Narendra Kumar narendrakumar.chepuri@gmail.com wrote:
Hi Senthil,
I am getting some error while deploying image in panda. I am sharing log can you tell me what could be the issue.
ErrorMessage: Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. ser2net port 4000 device /dev/ttyS0 [115200 N81] (Debian GNU/Linux) Connection closed by foreign host. CriticalError: Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. ser2net port 4000 device /dev/ttyS0 [115200 N81] (Debian GNU/Linux) Connection closed by foreign host.
On Thu, Feb 26, 2015 at 7:10 PM, Senthil Kumaran < senthil.kumaran@linaro.org> wrote:
Hi Narendra,
On Thursday 26 February 2015 06:48 PM, Narendra Kumar wrote:
we need to only master images for testing? Using of images located at "https://releases.linaro.org/" is allowed?
Master image helps to leave the board in a useable state after each job run in LAVA. You can read about master images here - https://validation.linaro.org/static/docs/lava-image- creation.html?highlight=master%20image and here - https://git.linaro.org/lava/lava-master-image-scripts.git/ blob_plain/HEAD:/README
Test images are the images that you specify within the job JSON, on which you want your tests to get executed. These could be images from https://releases.linaro.org or elsewhere. These images will have the partition layout already setup by master images for deploying these images in device under test (DUT) that is connected with LAVA.
Thank You.
Senthil Kumaran http://www.stylesen.org/ http://www.sasenthilkumaran.com/
-- <image002.png>Please consider the environment before printing this e-mail
Thanks & Regards Narendra Kumar Chepuri (+917353049544)
<job_56.log>
<panda01.conf>
<panda-basic-usb-test.json>
linaro-validation mailing list linaro-validation@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-validation
-- [image: tree pine]Please consider the environment before printing this e-mail
Thanks & Regards Narendra Kumar Chepuri (+917353049544)
Hi, I am trying to submit a job for pandaboard, I am not using PDU so when ever it tries to soft reboot I am removing the power supply and connecting it back, so there is no issues without PDU, but now I am unable to load the image on to board because it is tring for some tftp connection and checking the ethernet connection of board before rebooting of board ethernet connection is working fine but after rebooting ethernet is down and it is unable to load the image to board due to some other reasons. Can any one check the log, device config , json file for figuringout the issue.
On Mon, Mar 9, 2015 at 2:48 PM, Narendra Kumar < narendrakumar.chepuri@gmail.com> wrote:
Hi Dave,
Is there any way to solve this without using PDU, likeincreasing the delay of for manual plugging and unplugging of power supply to board. If PDU is compulsory then which type of PDU can used because if we google for PDU different types of PDU's are there. for LAVA which of PDU can be used?
On Mon, Mar 2, 2015 at 3:02 PM, Narendra Kumar < narendrakumar.chepuri@gmail.com> wrote:
Hi Dave,
I have only one telnet connection to board, where Iconfigured to port 4000 using "telnet localhost 4000" command in my PC I am able to connect to board. The issue might be the restart command in panda01.conf "/usr/bin/pduclient --daemon localhost --hostname pdu --command reboot --port 05" where PDU port-05 is not configured to telnet port 4000, if this is the issue may I know how to configure PDU port to required telnet port.
On Fri, Feb 27, 2015 at 7:50 PM, Dave Pigott dave.pigott@linaro.org wrote:
Hi Narendra,
That looks like you have another telnet connection to the board, or you haven't set up your serial console correctly.
Dave
Sent from my Aldis Lamp
On 27 Feb 2015, at 06:46, Narendra Kumar < narendrakumar.chepuri@gmail.com> wrote:
Hi Senthil,
I am getting some error while deploying image in panda. I am sharing log can you tell me what could be the issue.
ErrorMessage: Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. ser2net port 4000 device /dev/ttyS0 [115200 N81] (Debian GNU/Linux) Connection closed by foreign host. CriticalError: Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. ser2net port 4000 device /dev/ttyS0 [115200 N81] (Debian GNU/Linux) Connection closed by foreign host.
On Thu, Feb 26, 2015 at 7:10 PM, Senthil Kumaran < senthil.kumaran@linaro.org> wrote:
Hi Narendra,
On Thursday 26 February 2015 06:48 PM, Narendra Kumar wrote:
we need to only master images for testing? Using of images located at "https://releases.linaro.org/" is allowed?
Master image helps to leave the board in a useable state after each job run in LAVA. You can read about master images here - https://validation.linaro.org/static/docs/lava-image- creation.html?highlight=master%20image and here - https://git.linaro.org/lava/lava-master-image-scripts.git/ blob_plain/HEAD:/README
Test images are the images that you specify within the job JSON, on which you want your tests to get executed. These could be images from https://releases.linaro.org or elsewhere. These images will have the partition layout already setup by master images for deploying these images in device under test (DUT) that is connected with LAVA.
Thank You.
Senthil Kumaran http://www.stylesen.org/ http://www.sasenthilkumaran.com/
-- <image002.png>Please consider the environment before printing this e-mail
Thanks & Regards Narendra Kumar Chepuri (+917353049544)
<job_56.log>
<panda01.conf>
<panda-basic-usb-test.json>
linaro-validation mailing list linaro-validation@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-validation
-- [image: tree pine]Please consider the environment before printing this e-mail
Thanks & Regards Narendra Kumar Chepuri (+917353049544)
-- [image: tree pine]Please consider the environment before printing this e-mail
Thanks & Regards Narendra Kumar Chepuri (+917353049544)
Hi Senthil, I am trying to submit a job for pandaboard, I am not using PDU so when ever it tries to soft reboot I am removing the power supply and connecting it back, so there is no issues without PDU, but now I am unable to load the image on to board because it is tring for some tftp connection and checking the ethernet connection of board before rebooting of board ethernet connection is working fine but after rebooting ethernet is down and it is unable to load the image to board due to some other reasons. Can any one check the log, device config , json file for figuringout the issue.
[image: tree pine]Please consider the environment before printing this e-mail
Thanks & Regards Narendra Kumar Chepuri (+917353049544)
On Friday 13 March 2015 04:28 PM, Narendra Kumar wrote:
I am trying to submit a job for pandaboard, I am not usingPDU so when ever it tries to soft reboot I am removing the power supply and connecting it back, so there is no issues without PDU, but now I am unable to load the image on to board because it is tring for some tftp connection and checking the ethernet connection of board before rebooting of board ethernet connection is working fine but after rebooting ethernet is down and it is unable to load the image to board due to some other reasons. Can any one check the log, device config , json file for figuringout the issue.
As discussed in IRC, I suggest you to try things and get back.
Thank You.
Hi Senthil,
I have added hardreset commad in device config to know when to disconnect the power supply I am disconnecting after seeing the meassge pdu2.sh notfound and connecting back. I have changed json file as you mentioned for deploy_image action. Now I am getting error related to "testrootfs". Please check the log, json and device config.
On Fri, Mar 13, 2015 at 5:34 PM, Senthil Kumaran <senthil.kumaran@linaro.org
wrote:
On Friday 13 March 2015 04:28 PM, Narendra Kumar wrote:
I am trying to submit a job for pandaboard, I am not usingPDU so when ever it tries to soft reboot I am removing the power supply and connecting it back, so there is no issues without PDU, but now I am unable to load the image on to board because it is tring for some tftp connection and checking the ethernet connection of board before rebooting of board ethernet connection is working fine but after rebooting ethernet is down and it is unable to load the image to board due to some other reasons. Can any one check the log, device config , json file for figuringout the issue.
As discussed in IRC, I suggest you to try things and get back.
Thank You.
Senthil Kumaran http://www.stylesen.org/ http://www.sasenthilkumaran.com/
linaro-validation@lists.linaro.org
-
Dave Pigott -
Narendra Kumar -
Senthil Kumaran