Linux-kselftest-mirror January 2021

linux-kselftest-mirror@lists.linaro.org

77 participants
88 discussions

[PATCH v3 4/4] selftest/x86/signal: Include test cases for validating sigaltstack

by Chang S. Bae

The test measures the kernel's signal delivery with different (enough vs. insufficient) stack sizes. Signed-off-by: Chang S. Bae <chang.seok.bae(a)intel.com> Reviewed-by: Len Brown <len.brown(a)intel.com> Cc: Borislav Petkov <bp(a)alien8.de> Cc: x86(a)kernel.org Cc: linux-kselftest(a)vger.kernel.org Cc: linux-kernel(a)vger.kernel.org --- Changes from v2: * Revised test messages (Borislav Pekov) --- tools/testing/selftests/x86/Makefile | 2 +- tools/testing/selftests/x86/sigaltstack.c | 128 ++++++++++++++++++++++ 2 files changed, 129 insertions(+), 1 deletion(-) create mode 100644 tools/testing/selftests/x86/sigaltstack.c diff --git a/tools/testing/selftests/x86/Makefile b/tools/testing/selftests/x86/Makefile index 6703c7906b71..e0c52e5ab49e 100644 --- a/tools/testing/selftests/x86/Makefile +++ b/tools/testing/selftests/x86/Makefile @@ -13,7 +13,7 @@ CAN_BUILD_WITH_NOPIE := $(shell ./check_cc.sh $(CC) trivial_program.c -no-pie) TARGETS_C_BOTHBITS := single_step_syscall sysret_ss_attrs syscall_nt test_mremap_vdso \ check_initial_reg_state sigreturn iopl ioperm \ test_vdso test_vsyscall mov_ss_trap \ - syscall_arg_fault fsgsbase_restore + syscall_arg_fault fsgsbase_restore sigaltstack TARGETS_C_32BIT_ONLY := entry_from_vm86 test_syscall_vdso unwind_vdso \ test_FCMOV test_FCOMI test_FISTTP \ vdso_restorer diff --git a/tools/testing/selftests/x86/sigaltstack.c b/tools/testing/selftests/x86/sigaltstack.c new file mode 100644 index 000000000000..e2cbf09723c8 --- /dev/null +++ b/tools/testing/selftests/x86/sigaltstack.c @@ -0,0 +1,128 @@ +// SPDX-License-Identifier: GPL-2.0-only + +#define _GNU_SOURCE +#include <signal.h> +#include <stdio.h> +#include <stdbool.h> +#include <string.h> +#include <err.h> +#include <errno.h> +#include <limits.h> +#include <sys/mman.h> +#include <sys/auxv.h> +#include <sys/prctl.h> +#include <sys/resource.h> +#include <setjmp.h> + +/* sigaltstack()-enforced minimum stack */ +#define ENFORCED_MINSIGSTKSZ 2048 + +#ifndef AT_MINSIGSTKSZ +# define AT_MINSIGSTKSZ 51 +#endif + +static int nerrs; + +static bool sigalrm_expected; + +static unsigned long at_minstack_size; + +static void sethandler(int sig, void (*handler)(int, siginfo_t *, void *), + int flags) +{ + struct sigaction sa; + + memset(&sa, 0, sizeof(sa)); + sa.sa_sigaction = handler; + sa.sa_flags = SA_SIGINFO | flags; + sigemptyset(&sa.sa_mask); + if (sigaction(sig, &sa, 0)) + err(1, "sigaction"); +} + +static void clearhandler(int sig) +{ + struct sigaction sa; + + memset(&sa, 0, sizeof(sa)); + sa.sa_handler = SIG_DFL; + sigemptyset(&sa.sa_mask); + if (sigaction(sig, &sa, 0)) + err(1, "sigaction"); +} + +static int setup_altstack(void *start, unsigned long size) +{ + stack_t ss; + + memset(&ss, 0, sizeof(ss)); + ss.ss_size = size; + ss.ss_sp = start; + + return sigaltstack(&ss, NULL); +} + +static jmp_buf jmpbuf; + +static void sigsegv(int sig, siginfo_t *info, void *ctx_void) +{ + if (sigalrm_expected) { + printf("[FAIL]\tSIGSEGV signal delivery is wrong.\n"); + nerrs++; + } else { + printf("[OK]\tSIGSEGV signal is delivered.\n"); + } + + siglongjmp(jmpbuf, 1); +} + +static void sigalrm(int sig, siginfo_t *info, void *ctx_void) +{ + if (!sigalrm_expected) { + printf("[FAIL]\tSIGALRM sigal delivery is wrong.\n"); + nerrs++; + } else { + printf("[OK]\tSIGALRM signal is delivered.\n"); + } +} + +static void test_sigaltstack(void *altstack, unsigned long size) +{ + if (setup_altstack(altstack, size)) + err(1, "sigaltstack()"); + + sigalrm_expected = (size > at_minstack_size) ? true : false; + + sethandler(SIGSEGV, sigsegv, 0); + sethandler(SIGALRM, sigalrm, SA_ONSTACK); + + if (sigsetjmp(jmpbuf, 1) == 0) { + printf("[RUN]\tTest an (%s) alternate signal stack\n", + sigalrm_expected ? "enough" : "too-small"); + printf("\tRaise SIGALRM. %s is expected to be delivered.\n", + sigalrm_expected ? "It" : "But SIGSEGV"); + raise(SIGALRM); + } + + clearhandler(SIGALRM); + clearhandler(SIGSEGV); +} + +int main(void) +{ + void *altstack; + + at_minstack_size = getauxval(AT_MINSIGSTKSZ); + + altstack = mmap(NULL, at_minstack_size + SIGSTKSZ, PROT_READ | PROT_WRITE, + MAP_PRIVATE | MAP_ANONYMOUS | MAP_STACK, -1, 0); + if (altstack == MAP_FAILED) + err(1, "mmap()"); + + if ((ENFORCED_MINSIGSTKSZ + 1) < at_minstack_size) + test_sigaltstack(altstack, ENFORCED_MINSIGSTKSZ + 1); + + test_sigaltstack(altstack, at_minstack_size + SIGSTKSZ); + + return nerrs == 0 ? 0 : 1; +} -- 2.17.1

3 years, 3 months

[PATCH] kunit: tool: Force the use of the 'tty' console for UML

by David Gow

kunit_tool relies on the UML console outputting printk() output to the tty in order to get results. Since the default console driver could change, pass 'console=tty' to the kernel. This is triggered by a change[1] to use ttynull as a fallback console driver which -- by chance or by design -- seems to have changed the default console output on UML, breaking kunit_tool. While this may be fixed, we should be less fragile to such changes in the default. [1]: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… Signed-off-by: David Gow <davidgow(a)google.com> Fixes: 757055ae8ded ("init/console: Use ttynull as a fallback when there is no console") --- tools/testing/kunit/kunit_kernel.py | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/kunit/kunit_kernel.py b/tools/testing/kunit/kunit_kernel.py index 57c1724b7e5d..698358c9c0d6 100644 --- a/tools/testing/kunit/kunit_kernel.py +++ b/tools/testing/kunit/kunit_kernel.py @@ -198,7 +198,7 @@ class LinuxSourceTree(object): return self.validate_config(build_dir) def run_kernel(self, args=[], build_dir='', timeout=None): - args.extend(['mem=1G']) + args.extend(['mem=1G', 'console=tty']) self._ops.linux_bin(args, timeout, build_dir) outfile = get_outfile_path(build_dir) subprocess.call(['stty', 'sane']) -- 2.29.2.729.g45daf8777d-goog

3 years, 3 months

kunit stopped working

by Andy Shevchenko

Hi! For last few weeks KUnit stopped working. Any insight? P.S. I guess no need to tell that my kernel on which I run tests has not been changed as well as command line for wrapper: tools/testing/kunit/kunit.py run --build_dir ~/$OUT_DIR -- With Best Regards, Andy Shevchenko

3 years, 3 months

[PATCH] selftests: fix the return value for UDP GRO test

by Po-Hsu Lin

The udpgro.sh will always return 0 (unless the bpf selftest was not build first) even if there are some failed sub test-cases. Therefore the kselftest framework will report this case is OK. Check and return the exit status of each test to make it easier to spot real failures. Signed-off-by: Po-Hsu Lin <po-hsu.lin(a)canonical.com> --- tools/testing/selftests/net/udpgro.sh | 34 ++++++++++++++++++++++++++++++++++ 1 file changed, 34 insertions(+) diff --git a/tools/testing/selftests/net/udpgro.sh b/tools/testing/selftests/net/udpgro.sh index ac2a30b..f8a19f5 100755 --- a/tools/testing/selftests/net/udpgro.sh +++ b/tools/testing/selftests/net/udpgro.sh @@ -5,6 +5,14 @@ readonly PEER_NS="ns-peer-$(mktemp -u XXXXXX)" +# set global exit status, but never reset nonzero one. +check_err() +{ + if [ $ret -eq 0 ]; then + ret=$1 + fi +} + cleanup() { local -r jobs="$(jobs -p)" local -r ns="$(ip netns list|grep $PEER_NS)" @@ -44,7 +52,9 @@ run_one() { # Hack: let bg programs complete the startup sleep 0.1 ./udpgso_bench_tx ${tx_args} + ret=$? wait $(jobs -p) + return $ret } run_test() { @@ -87,8 +97,10 @@ run_one_nat() { sleep 0.1 ./udpgso_bench_tx ${tx_args} + ret=$? kill -INT $pid wait $(jobs -p) + return $ret } run_one_2sock() { @@ -110,7 +122,9 @@ run_one_2sock() { sleep 0.1 # first UDP GSO socket should be closed at this point ./udpgso_bench_tx ${tx_args} + ret=$? wait $(jobs -p) + return $ret } run_nat_test() { @@ -131,36 +145,54 @@ run_all() { local -r core_args="-l 4" local -r ipv4_args="${core_args} -4 -D 192.168.1.1" local -r ipv6_args="${core_args} -6 -D 2001:db8::1" + ret=0 echo "ipv4" run_test "no GRO" "${ipv4_args} -M 10 -s 1400" "-4 -n 10 -l 1400" + check_err $? # explicitly check we are not receiving UDP_SEGMENT cmsg (-S -1) # when GRO does not take place run_test "no GRO chk cmsg" "${ipv4_args} -M 10 -s 1400" "-4 -n 10 -l 1400 -S -1" + check_err $? # the GSO packets are aggregated because: # * veth schedule napi after each xmit # * segmentation happens in BH context, veth napi poll is delayed after # the transmission of the last segment run_test "GRO" "${ipv4_args} -M 1 -s 14720 -S 0 " "-4 -n 1 -l 14720" + check_err $? run_test "GRO chk cmsg" "${ipv4_args} -M 1 -s 14720 -S 0 " "-4 -n 1 -l 14720 -S 1472" + check_err $? run_test "GRO with custom segment size" "${ipv4_args} -M 1 -s 14720 -S 500 " "-4 -n 1 -l 14720" + check_err $? run_test "GRO with custom segment size cmsg" "${ipv4_args} -M 1 -s 14720 -S 500 " "-4 -n 1 -l 14720 -S 500" + check_err $? run_nat_test "bad GRO lookup" "${ipv4_args} -M 1 -s 14720 -S 0" "-n 10 -l 1472" + check_err $? run_2sock_test "multiple GRO socks" "${ipv4_args} -M 1 -s 14720 -S 0 " "-4 -n 1 -l 14720 -S 1472" + check_err $? echo "ipv6" run_test "no GRO" "${ipv6_args} -M 10 -s 1400" "-n 10 -l 1400" + check_err $? run_test "no GRO chk cmsg" "${ipv6_args} -M 10 -s 1400" "-n 10 -l 1400 -S -1" + check_err $? run_test "GRO" "${ipv6_args} -M 1 -s 14520 -S 0" "-n 1 -l 14520" + check_err $? run_test "GRO chk cmsg" "${ipv6_args} -M 1 -s 14520 -S 0" "-n 1 -l 14520 -S 1452" + check_err $? run_test "GRO with custom segment size" "${ipv6_args} -M 1 -s 14520 -S 500" "-n 1 -l 14520" + check_err $? run_test "GRO with custom segment size cmsg" "${ipv6_args} -M 1 -s 14520 -S 500" "-n 1 -l 14520 -S 500" + check_err $? run_nat_test "bad GRO lookup" "${ipv6_args} -M 1 -s 14520 -S 0" "-n 10 -l 1452" + check_err $? run_2sock_test "multiple GRO socks" "${ipv6_args} -M 1 -s 14520 -S 0 " "-n 1 -l 14520 -S 1452" + check_err $? + return $ret } if [ ! -f ../bpf/xdp_dummy.o ]; then @@ -180,3 +212,5 @@ elif [[ $1 == "__subprocess_2sock" ]]; then shift run_one_2sock $@ fi + +exit $? -- 2.7.4

3 years, 3 months

[PATCH 0/7] selftests: gpio: rework and port to GPIO uAPI v2

by Kent Gibson

Initially I just wanted to port the selftests to the latest GPIO uAPI, but on finding that, due to dependency issues, the selftests are not built for the buildroot environments that I do most of my GPIO testing in, I decided to take a closer look. The first patch is essentially a rewrite of the exising test suite. It uses a simplified abstraction of the uAPI interfaces to allow a common test suite to test the gpio-mockup using either of the uAPI interfaces. The simplified cdev interface is implemented in gpio-mockup.sh, with the actual driving of the uAPI implemented in gpio-mockup-cdev.c. The simplified sysfs interface replaces gpio-mockup-sysfs.sh and is loaded over the cdev implementation when selected. The new tests should also be simpler to extend to cover new mockup interfaces, such as the one Bart has been working on. I have dropped support for testing modules other than gpio-mockup from the command line options, as the tests are very gpio-mockup specific so I didn't see any calling for it. I have also tried to emphasise in the test output that the tests are covering the gpio-mockup itself. They do perform some implicit testing of gpiolib and the uAPI interfaces, and so can be useful as smoke tests for those, but their primary focus is the gpio-mockup. Patches 2 through 5 do some cleaning up that is now possible with the new implementation, including enabling building in buildroot environments. Patch 4 doesn't strictly clean up all the old gpio references that it could - the gpio was the only Level 1 test, so the Level 1 tests could potentially be removed, but I was unsure if there may be other implications to removing a whole test level, or that it may be useful as a placeholder in case other static LDLIBS tests are added in the future?? Patch 6 finally gets around to porting the tests to the latest GPIO uAPI. And Patch 7 updates the config to set the CONFIG_GPIO_CDEV option that was added in v5.10. Cheers, Kent. Kent Gibson (7): selftests: gpio: rework and simplify test implementation selftests: gpio: remove obsolete gpio-mockup-chardev.c selftests: remove obsolete build restriction for gpio selftests: remove obsolete gpio references from kselftest_deps.sh tools: gpio: remove uAPI v1 code no longer used by selftests selftests: gpio: port to GPIO uAPI v2 selftests: gpio: add CONFIG_GPIO_CDEV to config tools/gpio/gpio-utils.c | 89 ---- tools/gpio/gpio-utils.h | 6 - tools/testing/selftests/Makefile | 9 - tools/testing/selftests/gpio/Makefile | 26 +- tools/testing/selftests/gpio/config | 1 + .../testing/selftests/gpio/gpio-mockup-cdev.c | 198 ++++++++ .../selftests/gpio/gpio-mockup-chardev.c | 323 ------------ .../selftests/gpio/gpio-mockup-sysfs.sh | 168 ++----- tools/testing/selftests/gpio/gpio-mockup.sh | 469 ++++++++++++------ tools/testing/selftests/kselftest_deps.sh | 4 +- 10 files changed, 573 insertions(+), 720 deletions(-) create mode 100644 tools/testing/selftests/gpio/gpio-mockup-cdev.c delete mode 100644 tools/testing/selftests/gpio/gpio-mockup-chardev.c -- 2.30.0

3 years, 3 months

[PATCH net] selftests: netfilter: Pass the family parameter to conntrack tool

by Yi Chen

From: yiche <yiche(a)redhat.com> Fix nft_conntrack_helper.sh fake fail: conntrack tool need "-f ipv6" parameter to show out ipv6 traffic items. sleep 1 second after background nc send packet, to make sure check result after this statement is executed. Signed-off-by: yiche <yiche(a)redhat.com> --- .../selftests/netfilter/nft_conntrack_helper.sh | 12 +++++++++--- 1 file changed, 9 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/netfilter/nft_conntrack_helper.sh b/tools/testing/selftests/netfilter/nft_conntrack_helper.sh index edf0a48da6bf..ebdf2b23c8e3 100755 --- a/tools/testing/selftests/netfilter/nft_conntrack_helper.sh +++ b/tools/testing/selftests/netfilter/nft_conntrack_helper.sh @@ -94,7 +94,13 @@ check_for_helper() local message=$2 local port=$3 - ip netns exec ${netns} conntrack -L -p tcp --dport $port 2> /dev/null |grep -q 'helper=ftp' + if [[ "$2" =~ "ipv6" ]];then + local family=ipv6 + else + local family=ipv4 + fi + + ip netns exec ${netns} conntrack -L -f $family -p tcp --dport $port 2> /dev/null |grep -q 'helper=ftp' if [ $? -ne 0 ] ; then echo "FAIL: ${netns} did not show attached helper $message" 1>&2 ret=1 @@ -111,8 +117,8 @@ test_helper() sleep 3 | ip netns exec ${ns2} nc -w 2 -l -p $port > /dev/null & - sleep 1 sleep 1 | ip netns exec ${ns1} nc -w 2 10.0.1.2 $port > /dev/null & + sleep 1 check_for_helper "$ns1" "ip $msg" $port check_for_helper "$ns2" "ip $msg" $port @@ -128,8 +134,8 @@ test_helper() sleep 3 | ip netns exec ${ns2} nc -w 2 -6 -l -p $port > /dev/null & - sleep 1 sleep 1 | ip netns exec ${ns1} nc -w 2 -6 dead:1::2 $port > /dev/null & + sleep 1 check_for_helper "$ns1" "ipv6 $msg" $port check_for_helper "$ns2" "ipv6 $msg" $port -- 2.26.2

3 years, 3 months

[PATCH] selftests: xfrm: fix test return value override issue in xfrm_policy.sh

by Po-Hsu Lin

When running this xfrm_policy.sh test script, even with some cases marked as FAIL, the overall test result will still be PASS: $ sudo ./xfrm_policy.sh PASS: policy before exception matches FAIL: expected ping to .254 to fail (exceptions) PASS: direct policy matches (exceptions) PASS: policy matches (exceptions) FAIL: expected ping to .254 to fail (exceptions and block policies) PASS: direct policy matches (exceptions and block policies) PASS: policy matches (exceptions and block policies) FAIL: expected ping to .254 to fail (exceptions and block policies after hresh changes) PASS: direct policy matches (exceptions and block policies after hresh changes) PASS: policy matches (exceptions and block policies after hresh changes) FAIL: expected ping to .254 to fail (exceptions and block policies after hthresh change in ns3) PASS: direct policy matches (exceptions and block policies after hthresh change in ns3) PASS: policy matches (exceptions and block policies after hthresh change in ns3) FAIL: expected ping to .254 to fail (exceptions and block policies after htresh change to normal) PASS: direct policy matches (exceptions and block policies after htresh change to normal) PASS: policy matches (exceptions and block policies after htresh change to normal) PASS: policies with repeated htresh change $ echo $? 0 This is because the $lret in check_xfrm() is not a local variable. Therefore when a test failed in check_exceptions(), the non-zero $lret will later get reset to 0 when the next test calls check_xfrm(). With this fix, the final return value will be 1. Make it easier for testers to spot this failure. Fixes: 39aa6928d462d0 ("xfrm: policy: fix netlink/pf_key policy lookups") Signed-off-by: Po-Hsu Lin <po-hsu.lin(a)canonical.com> --- tools/testing/selftests/net/xfrm_policy.sh | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/net/xfrm_policy.sh b/tools/testing/selftests/net/xfrm_policy.sh index 7a1bf94..5922941 100755 --- a/tools/testing/selftests/net/xfrm_policy.sh +++ b/tools/testing/selftests/net/xfrm_policy.sh @@ -202,7 +202,7 @@ check_xfrm() { # 1: iptables -m policy rule count != 0 rval=$1 ip=$2 - lret=0 + local lret=0 ip netns exec ns1 ping -q -c 1 10.0.2.$ip > /dev/null -- 2.7.4

3 years, 3 months

Re: [PATCH 1/7] selftests: gpio: rework and simplify test implementation

by Kent Gibson

On Sat, Jan 02, 2021 at 03:52:32PM +0200, Andy Shevchenko wrote: > On Saturday, January 2, 2021, Kent Gibson <warthog618(a)gmail.com> wrote: > > > The GPIO mockup selftests are overly complicated with separate > > implementations of the tests for sysfs and cdev uAPI, and with the cdev > > implementation being dependent on tools/gpio and libmount. > > > > Rework the test implementation to provide a common test suite with a > > simplified pluggable uAPI interface. The cdev implementation utilises > > the GPIO uAPI directly to remove the dependence on tools/gpio. > > The simplified uAPI interface removes the need for any file system mount > > checks in C, and so removes the dependence on libmount. > > > > The rework also fixes the sysfs test implementation which has been broken > > since the device created in the multiple gpiochip case was split into > > separate devices. > > > > > > I briefly looked at code in shell below... there are places to improve > (useless use of: cat, test, negation, etc). > My shell is clearly pretty poor, so I would really appreciate a pointer to an example of each, and I'll then hunt down the rest. Thanks, Kent.

3 years, 3 months

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror January 2021