February 2022 - Linux-kselftest-mirror

[PATCH AUTOSEL 4.14 2/8] selftests/zram: Skip max_comp_streams interface on newer kernel

by Sasha Levin

From: Yang Xu <xuyang2018.jy(a)fujitsu.com> [ Upstream commit fc4eb486a59d70bd35cf1209f0e68c2d8b979193 ] Since commit 43209ea2d17a ("zram: remove max_comp_streams internals"), zram has switched to per-cpu streams. Even kernel still keep this interface for some reasons, but writing to max_comp_stream doesn't take any effect. So skip it on newer kernel ie 4.7. The code that comparing kernel version is from xfstests testsuite ext4/053. Signed-off-by: Yang Xu <xuyang2018.jy(a)fujitsu.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/zram/zram_lib.sh | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/tools/testing/selftests/zram/zram_lib.sh b/tools/testing/selftests/zram/zram_lib.sh index 9e73a4fb9b0aa..2c1d1c567f854 100755 --- a/tools/testing/selftests/zram/zram_lib.sh +++ b/tools/testing/selftests/zram/zram_lib.sh @@ -20,6 +20,9 @@ dev_mounted=-1 # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 +kernel_version=`uname -r | cut -d'.' -f1,2` +kernel_major=${kernel_version%.*} +kernel_minor=${kernel_version#*.} trap INT @@ -34,6 +37,20 @@ check_prereqs() fi } +kernel_gte() +{ + major=${1%.*} + minor=${1#*.} + + if [ $kernel_major -gt $major ]; then + return 0 + elif [[ $kernel_major -eq $major && $kernel_minor -ge $minor ]]; then + return 0 + fi + + return 1 +} + zram_cleanup() { echo "zram cleanup" @@ -95,6 +112,13 @@ zram_max_streams() { echo "set max_comp_streams to zram device(s)" + kernel_gte 4.7 + if [ $? -eq 0 ]; then + echo "The device attribute max_comp_streams was"\ + "deprecated in 4.7" + return 0 + fi + local i=0 for max_s in $zram_max_streams; do local sys_path="/sys/block/zram${i}/max_comp_streams" -- 2.34.1

2 years, 10 months

1
0
0 0

[PATCH AUTOSEL 4.19 04/10] selftests/zram: Adapt the situation that /dev/zram0 is being used

by Sasha Levin

From: Yang Xu <xuyang2018.jy(a)fujitsu.com> [ Upstream commit 01dabed20573804750af5c7bf8d1598a6bf7bf6e ] If zram-generator package is installed and works, then we can not remove zram module because zram swap is being used. This case needs a clean zram environment, change this test by using hot_add/hot_remove interface. So even zram device is being used, we still can add zram device and remove them in cleanup. The two interface was introduced since kernel commit 6566d1a32bf7("zram: add dynamic device add/remove functionality") in v4.2-rc1. If kernel supports these two interface, we use hot_add/hot_remove to slove this problem, if not, just check whether zram is being used or built in, then skip it on old kernel. Signed-off-by: Yang Xu <xuyang2018.jy(a)fujitsu.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/zram/zram.sh | 15 +--- tools/testing/selftests/zram/zram01.sh | 3 +- tools/testing/selftests/zram/zram02.sh | 1 - tools/testing/selftests/zram/zram_lib.sh | 110 +++++++++++++---------- 4 files changed, 66 insertions(+), 63 deletions(-) diff --git a/tools/testing/selftests/zram/zram.sh b/tools/testing/selftests/zram/zram.sh index 232e958ec4547..b0b91d9b0dc21 100755 --- a/tools/testing/selftests/zram/zram.sh +++ b/tools/testing/selftests/zram/zram.sh @@ -2,9 +2,6 @@ # SPDX-License-Identifier: GPL-2.0 TCID="zram.sh" -# Kselftest framework requirement - SKIP code is 4. -ksft_skip=4 - . ./zram_lib.sh run_zram () { @@ -18,14 +15,4 @@ echo "" check_prereqs -# check zram module exists -MODULE_PATH=/lib/modules/`uname -r`/kernel/drivers/block/zram/zram.ko -if [ -f $MODULE_PATH ]; then - run_zram -elif [ -b /dev/zram0 ]; then - run_zram -else - echo "$TCID : No zram.ko module or /dev/zram0 device file not found" - echo "$TCID : CONFIG_ZRAM is not set" - exit $ksft_skip -fi +run_zram diff --git a/tools/testing/selftests/zram/zram01.sh b/tools/testing/selftests/zram/zram01.sh index ac6e4ddd2604e..8abc9965089d1 100755 --- a/tools/testing/selftests/zram/zram01.sh +++ b/tools/testing/selftests/zram/zram01.sh @@ -42,7 +42,7 @@ zram_algs="lzo" zram_fill_fs() { - for i in $(seq 0 $(($dev_num - 1))); do + for i in $(seq $dev_start $dev_end); do echo "fill zram$i..." local b=0 while [ true ]; do @@ -76,7 +76,6 @@ zram_mount zram_fill_fs zram_cleanup -zram_unload if [ $ERR_CODE -ne 0 ]; then echo "$TCID : [FAIL]" diff --git a/tools/testing/selftests/zram/zram02.sh b/tools/testing/selftests/zram/zram02.sh index 74569b883737f..3768cfd2e5f83 100755 --- a/tools/testing/selftests/zram/zram02.sh +++ b/tools/testing/selftests/zram/zram02.sh @@ -45,7 +45,6 @@ zram_set_memlimit zram_makeswap zram_swapoff zram_cleanup -zram_unload if [ $ERR_CODE -ne 0 ]; then echo "$TCID : [FAIL]" diff --git a/tools/testing/selftests/zram/zram_lib.sh b/tools/testing/selftests/zram/zram_lib.sh index 2c1d1c567f854..130d193cbd727 100755 --- a/tools/testing/selftests/zram/zram_lib.sh +++ b/tools/testing/selftests/zram/zram_lib.sh @@ -14,10 +14,12 @@ # Author: Alexey Kodanev <alexey.kodanev(a)oracle.com> # Modified: Naresh Kamboju <naresh.kamboju(a)linaro.org> -MODULE=0 dev_makeswap=-1 dev_mounted=-1 - +dev_start=0 +dev_end=-1 +module_load=-1 +sys_control=-1 # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 kernel_version=`uname -r | cut -d'.' -f1,2` @@ -55,57 +57,72 @@ zram_cleanup() { echo "zram cleanup" local i= - for i in $(seq 0 $dev_makeswap); do + for i in $(seq $dev_start $dev_makeswap); do swapoff /dev/zram$i done - for i in $(seq 0 $dev_mounted); do + for i in $(seq $dev_start $dev_mounted); do umount /dev/zram$i done - for i in $(seq 0 $(($dev_num - 1))); do + for i in $(seq $dev_start $dev_end); do echo 1 > /sys/block/zram${i}/reset rm -rf zram$i done -} + if [ $sys_control -eq 1 ]; then + for i in $(seq $dev_start $dev_end); do + echo $i > /sys/class/zram-control/hot_remove + done + fi -zram_unload() -{ - if [ $MODULE -ne 0 ] ; then - echo "zram rmmod zram" + if [ $module_load -eq 1 ]; then rmmod zram > /dev/null 2>&1 fi } zram_load() { - # check zram module exists - MODULE_PATH=/lib/modules/`uname -r`/kernel/drivers/block/zram/zram.ko - if [ -f $MODULE_PATH ]; then - MODULE=1 - echo "create '$dev_num' zram device(s)" - modprobe zram num_devices=$dev_num - if [ $? -ne 0 ]; then - echo "failed to insert zram module" - exit 1 - fi - - dev_num_created=$(ls /dev/zram* | wc -w) + echo "create '$dev_num' zram device(s)" + + # zram module loaded, new kernel + if [ -d "/sys/class/zram-control" ]; then + echo "zram modules already loaded, kernel supports" \ + "zram-control interface" + dev_start=$(ls /dev/zram* | wc -w) + dev_end=$(($dev_start + $dev_num - 1)) + sys_control=1 + + for i in $(seq $dev_start $dev_end); do + cat /sys/class/zram-control/hot_add > /dev/null + done + + echo "all zram devices (/dev/zram$dev_start~$dev_end" \ + "successfully created" + return 0 + fi - if [ "$dev_num_created" -ne "$dev_num" ]; then - echo "unexpected num of devices: $dev_num_created" - ERR_CODE=-1 + # detect old kernel or built-in + modprobe zram num_devices=$dev_num + if [ ! -d "/sys/class/zram-control" ]; then + if grep -q '^zram' /proc/modules; then + rmmod zram > /dev/null 2>&1 + if [ $? -ne 0 ]; then + echo "zram module is being used on old kernel" \ + "without zram-control interface" + exit $ksft_skip + fi else - echo "zram load module successful" + echo "test needs CONFIG_ZRAM=m on old kernel without" \ + "zram-control interface" + exit $ksft_skip fi - elif [ -b /dev/zram0 ]; then - echo "/dev/zram0 device file found: OK" - else - echo "ERROR: No zram.ko module or no /dev/zram0 device found" - echo "$TCID : CONFIG_ZRAM is not set" - exit 1 + modprobe zram num_devices=$dev_num fi + + module_load=1 + dev_end=$(($dev_num - 1)) + echo "all zram devices (/dev/zram0~$dev_end) successfully created" } zram_max_streams() @@ -119,7 +136,7 @@ zram_max_streams() return 0 fi - local i=0 + local i=$dev_start for max_s in $zram_max_streams; do local sys_path="/sys/block/zram${i}/max_comp_streams" echo $max_s > $sys_path || \ @@ -131,7 +148,7 @@ zram_max_streams() echo "FAIL can't set max_streams '$max_s', get $max_stream" i=$(($i + 1)) - echo "$sys_path = '$max_streams' ($i/$dev_num)" + echo "$sys_path = '$max_streams'" done echo "zram max streams: OK" @@ -141,15 +158,16 @@ zram_compress_alg() { echo "test that we can set compression algorithm" - local algs=$(cat /sys/block/zram0/comp_algorithm) + local i=$dev_start + local algs=$(cat /sys/block/zram${i}/comp_algorithm) echo "supported algs: $algs" - local i=0 + for alg in $zram_algs; do local sys_path="/sys/block/zram${i}/comp_algorithm" echo "$alg" > $sys_path || \ echo "FAIL can't set '$alg' to $sys_path" i=$(($i + 1)) - echo "$sys_path = '$alg' ($i/$dev_num)" + echo "$sys_path = '$alg'" done echo "zram set compression algorithm: OK" @@ -158,14 +176,14 @@ zram_compress_alg() zram_set_disksizes() { echo "set disk size to zram device(s)" - local i=0 + local i=$dev_start for ds in $zram_sizes; do local sys_path="/sys/block/zram${i}/disksize" echo "$ds" > $sys_path || \ echo "FAIL can't set '$ds' to $sys_path" i=$(($i + 1)) - echo "$sys_path = '$ds' ($i/$dev_num)" + echo "$sys_path = '$ds'" done echo "zram set disksizes: OK" @@ -175,14 +193,14 @@ zram_set_memlimit() { echo "set memory limit to zram device(s)" - local i=0 + local i=$dev_start for ds in $zram_mem_limits; do local sys_path="/sys/block/zram${i}/mem_limit" echo "$ds" > $sys_path || \ echo "FAIL can't set '$ds' to $sys_path" i=$(($i + 1)) - echo "$sys_path = '$ds' ($i/$dev_num)" + echo "$sys_path = '$ds'" done echo "zram set memory limit: OK" @@ -191,8 +209,8 @@ zram_set_memlimit() zram_makeswap() { echo "make swap with zram device(s)" - local i=0 - for i in $(seq 0 $(($dev_num - 1))); do + local i=$dev_start + for i in $(seq $dev_start $dev_end); do mkswap /dev/zram$i > err.log 2>&1 if [ $? -ne 0 ]; then cat err.log @@ -215,7 +233,7 @@ zram_makeswap() zram_swapoff() { local i= - for i in $(seq 0 $dev_makeswap); do + for i in $(seq $dev_start $dev_end); do swapoff /dev/zram$i > err.log 2>&1 if [ $? -ne 0 ]; then cat err.log @@ -229,7 +247,7 @@ zram_swapoff() zram_makefs() { - local i=0 + local i=$dev_start for fs in $zram_filesystems; do # if requested fs not supported default it to ext2 which mkfs.$fs > /dev/null 2>&1 || fs=ext2 @@ -248,7 +266,7 @@ zram_makefs() zram_mount() { local i=0 - for i in $(seq 0 $(($dev_num - 1))); do + for i in $(seq $dev_start $dev_end); do echo "mount /dev/zram$i" mkdir zram$i mount /dev/zram$i zram$i > /dev/null || \ -- 2.34.1

2 years, 10 months

1
0
0 0

[PATCH AUTOSEL 4.19 03/10] selftests/zram01.sh: Fix compression ratio calculation

by Sasha Levin

From: Yang Xu <xuyang2018.jy(a)fujitsu.com> [ Upstream commit d18da7ec3719559d6e74937266d0416e6c7e0b31 ] zram01 uses `free -m` to measure zram memory usage. The results are no sense because they are polluted by all running processes on the system. We Should only calculate the free memory delta for the current process. So use the third field of /sys/block/zram<id>/mm_stat to measure memory usage instead. The file is available since kernel 4.1. orig_data_size(first): uncompressed size of data stored in this disk. compr_data_size(second): compressed size of data stored in this disk mem_used_total(third): the amount of memory allocated for this disk Also remove useless zram cleanup call in zram_fill_fs and so we don't need to cleanup zram twice if fails. Signed-off-by: Yang Xu <xuyang2018.jy(a)fujitsu.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/zram/zram01.sh | 30 +++++++------------------- 1 file changed, 8 insertions(+), 22 deletions(-) diff --git a/tools/testing/selftests/zram/zram01.sh b/tools/testing/selftests/zram/zram01.sh index b9566a6478a9c..ac6e4ddd2604e 100755 --- a/tools/testing/selftests/zram/zram01.sh +++ b/tools/testing/selftests/zram/zram01.sh @@ -42,8 +42,6 @@ zram_algs="lzo" zram_fill_fs() { - local mem_free0=$(free -m | awk 'NR==2 {print $4}') - for i in $(seq 0 $(($dev_num - 1))); do echo "fill zram$i..." local b=0 @@ -54,29 +52,17 @@ zram_fill_fs() b=$(($b + 1)) done echo "zram$i can be filled with '$b' KB" - done - local mem_free1=$(free -m | awk 'NR==2 {print $4}') - local used_mem=$(($mem_free0 - $mem_free1)) + local mem_used_total=`awk '{print $3}' "/sys/block/zram$i/mm_stat"` + local v=$((100 * 1024 * $b / $mem_used_total)) + if [ "$v" -lt 100 ]; then + echo "FAIL compression ratio: 0.$v:1" + ERR_CODE=-1 + return + fi - local total_size=0 - for sm in $zram_sizes; do - local s=$(echo $sm | sed 's/M//') - total_size=$(($total_size + $s)) + echo "zram compression ratio: $(echo "scale=2; $v / 100 " | bc):1: OK" done - - echo "zram used ${used_mem}M, zram disk sizes ${total_size}M" - - local v=$((100 * $total_size / $used_mem)) - - if [ "$v" -lt 100 ]; then - echo "FAIL compression ratio: 0.$v:1" - ERR_CODE=-1 - zram_cleanup - return - fi - - echo "zram compression ratio: $(echo "scale=2; $v / 100 " | bc):1: OK" } check_prereqs -- 2.34.1

2 years, 10 months

1
0
0 0

[PATCH AUTOSEL 4.19 02/10] selftests/zram: Skip max_comp_streams interface on newer kernel

by Sasha Levin

From: Yang Xu <xuyang2018.jy(a)fujitsu.com> [ Upstream commit fc4eb486a59d70bd35cf1209f0e68c2d8b979193 ] Since commit 43209ea2d17a ("zram: remove max_comp_streams internals"), zram has switched to per-cpu streams. Even kernel still keep this interface for some reasons, but writing to max_comp_stream doesn't take any effect. So skip it on newer kernel ie 4.7. The code that comparing kernel version is from xfstests testsuite ext4/053. Signed-off-by: Yang Xu <xuyang2018.jy(a)fujitsu.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/zram/zram_lib.sh | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/tools/testing/selftests/zram/zram_lib.sh b/tools/testing/selftests/zram/zram_lib.sh index 9e73a4fb9b0aa..2c1d1c567f854 100755 --- a/tools/testing/selftests/zram/zram_lib.sh +++ b/tools/testing/selftests/zram/zram_lib.sh @@ -20,6 +20,9 @@ dev_mounted=-1 # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 +kernel_version=`uname -r | cut -d'.' -f1,2` +kernel_major=${kernel_version%.*} +kernel_minor=${kernel_version#*.} trap INT @@ -34,6 +37,20 @@ check_prereqs() fi } +kernel_gte() +{ + major=${1%.*} + minor=${1#*.} + + if [ $kernel_major -gt $major ]; then + return 0 + elif [[ $kernel_major -eq $major && $kernel_minor -ge $minor ]]; then + return 0 + fi + + return 1 +} + zram_cleanup() { echo "zram cleanup" @@ -95,6 +112,13 @@ zram_max_streams() { echo "set max_comp_streams to zram device(s)" + kernel_gte 4.7 + if [ $? -eq 0 ]; then + echo "The device attribute max_comp_streams was"\ + "deprecated in 4.7" + return 0 + fi + local i=0 for max_s in $zram_max_streams; do local sys_path="/sys/block/zram${i}/max_comp_streams" -- 2.34.1

2 years, 10 months

1
0
0 0

[PATCH AUTOSEL 5.4 06/15] selftests/zram: Adapt the situation that /dev/zram0 is being used

by Sasha Levin

From: Yang Xu <xuyang2018.jy(a)fujitsu.com> [ Upstream commit 01dabed20573804750af5c7bf8d1598a6bf7bf6e ] If zram-generator package is installed and works, then we can not remove zram module because zram swap is being used. This case needs a clean zram environment, change this test by using hot_add/hot_remove interface. So even zram device is being used, we still can add zram device and remove them in cleanup. The two interface was introduced since kernel commit 6566d1a32bf7("zram: add dynamic device add/remove functionality") in v4.2-rc1. If kernel supports these two interface, we use hot_add/hot_remove to slove this problem, if not, just check whether zram is being used or built in, then skip it on old kernel. Signed-off-by: Yang Xu <xuyang2018.jy(a)fujitsu.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/zram/zram.sh | 15 +--- tools/testing/selftests/zram/zram01.sh | 3 +- tools/testing/selftests/zram/zram02.sh | 1 - tools/testing/selftests/zram/zram_lib.sh | 110 +++++++++++++---------- 4 files changed, 66 insertions(+), 63 deletions(-) diff --git a/tools/testing/selftests/zram/zram.sh b/tools/testing/selftests/zram/zram.sh index 232e958ec4547..b0b91d9b0dc21 100755 --- a/tools/testing/selftests/zram/zram.sh +++ b/tools/testing/selftests/zram/zram.sh @@ -2,9 +2,6 @@ # SPDX-License-Identifier: GPL-2.0 TCID="zram.sh" -# Kselftest framework requirement - SKIP code is 4. -ksft_skip=4 - . ./zram_lib.sh run_zram () { @@ -18,14 +15,4 @@ echo "" check_prereqs -# check zram module exists -MODULE_PATH=/lib/modules/`uname -r`/kernel/drivers/block/zram/zram.ko -if [ -f $MODULE_PATH ]; then - run_zram -elif [ -b /dev/zram0 ]; then - run_zram -else - echo "$TCID : No zram.ko module or /dev/zram0 device file not found" - echo "$TCID : CONFIG_ZRAM is not set" - exit $ksft_skip -fi +run_zram diff --git a/tools/testing/selftests/zram/zram01.sh b/tools/testing/selftests/zram/zram01.sh index e9e9eb777e2c7..8f4affe34f3e4 100755 --- a/tools/testing/selftests/zram/zram01.sh +++ b/tools/testing/selftests/zram/zram01.sh @@ -33,7 +33,7 @@ zram_algs="lzo" zram_fill_fs() { - for i in $(seq 0 $(($dev_num - 1))); do + for i in $(seq $dev_start $dev_end); do echo "fill zram$i..." local b=0 while [ true ]; do @@ -67,7 +67,6 @@ zram_mount zram_fill_fs zram_cleanup -zram_unload if [ $ERR_CODE -ne 0 ]; then echo "$TCID : [FAIL]" diff --git a/tools/testing/selftests/zram/zram02.sh b/tools/testing/selftests/zram/zram02.sh index e83b404807c09..2418b0c4ed136 100755 --- a/tools/testing/selftests/zram/zram02.sh +++ b/tools/testing/selftests/zram/zram02.sh @@ -36,7 +36,6 @@ zram_set_memlimit zram_makeswap zram_swapoff zram_cleanup -zram_unload if [ $ERR_CODE -ne 0 ]; then echo "$TCID : [FAIL]" diff --git a/tools/testing/selftests/zram/zram_lib.sh b/tools/testing/selftests/zram/zram_lib.sh index f47fc0f27e99e..21ec1966de76c 100755 --- a/tools/testing/selftests/zram/zram_lib.sh +++ b/tools/testing/selftests/zram/zram_lib.sh @@ -5,10 +5,12 @@ # Author: Alexey Kodanev <alexey.kodanev(a)oracle.com> # Modified: Naresh Kamboju <naresh.kamboju(a)linaro.org> -MODULE=0 dev_makeswap=-1 dev_mounted=-1 - +dev_start=0 +dev_end=-1 +module_load=-1 +sys_control=-1 # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 kernel_version=`uname -r | cut -d'.' -f1,2` @@ -46,57 +48,72 @@ zram_cleanup() { echo "zram cleanup" local i= - for i in $(seq 0 $dev_makeswap); do + for i in $(seq $dev_start $dev_makeswap); do swapoff /dev/zram$i done - for i in $(seq 0 $dev_mounted); do + for i in $(seq $dev_start $dev_mounted); do umount /dev/zram$i done - for i in $(seq 0 $(($dev_num - 1))); do + for i in $(seq $dev_start $dev_end); do echo 1 > /sys/block/zram${i}/reset rm -rf zram$i done -} + if [ $sys_control -eq 1 ]; then + for i in $(seq $dev_start $dev_end); do + echo $i > /sys/class/zram-control/hot_remove + done + fi -zram_unload() -{ - if [ $MODULE -ne 0 ] ; then - echo "zram rmmod zram" + if [ $module_load -eq 1 ]; then rmmod zram > /dev/null 2>&1 fi } zram_load() { - # check zram module exists - MODULE_PATH=/lib/modules/`uname -r`/kernel/drivers/block/zram/zram.ko - if [ -f $MODULE_PATH ]; then - MODULE=1 - echo "create '$dev_num' zram device(s)" - modprobe zram num_devices=$dev_num - if [ $? -ne 0 ]; then - echo "failed to insert zram module" - exit 1 - fi - - dev_num_created=$(ls /dev/zram* | wc -w) + echo "create '$dev_num' zram device(s)" + + # zram module loaded, new kernel + if [ -d "/sys/class/zram-control" ]; then + echo "zram modules already loaded, kernel supports" \ + "zram-control interface" + dev_start=$(ls /dev/zram* | wc -w) + dev_end=$(($dev_start + $dev_num - 1)) + sys_control=1 + + for i in $(seq $dev_start $dev_end); do + cat /sys/class/zram-control/hot_add > /dev/null + done + + echo "all zram devices (/dev/zram$dev_start~$dev_end" \ + "successfully created" + return 0 + fi - if [ "$dev_num_created" -ne "$dev_num" ]; then - echo "unexpected num of devices: $dev_num_created" - ERR_CODE=-1 + # detect old kernel or built-in + modprobe zram num_devices=$dev_num + if [ ! -d "/sys/class/zram-control" ]; then + if grep -q '^zram' /proc/modules; then + rmmod zram > /dev/null 2>&1 + if [ $? -ne 0 ]; then + echo "zram module is being used on old kernel" \ + "without zram-control interface" + exit $ksft_skip + fi else - echo "zram load module successful" + echo "test needs CONFIG_ZRAM=m on old kernel without" \ + "zram-control interface" + exit $ksft_skip fi - elif [ -b /dev/zram0 ]; then - echo "/dev/zram0 device file found: OK" - else - echo "ERROR: No zram.ko module or no /dev/zram0 device found" - echo "$TCID : CONFIG_ZRAM is not set" - exit 1 + modprobe zram num_devices=$dev_num fi + + module_load=1 + dev_end=$(($dev_num - 1)) + echo "all zram devices (/dev/zram0~$dev_end) successfully created" } zram_max_streams() @@ -110,7 +127,7 @@ zram_max_streams() return 0 fi - local i=0 + local i=$dev_start for max_s in $zram_max_streams; do local sys_path="/sys/block/zram${i}/max_comp_streams" echo $max_s > $sys_path || \ @@ -122,7 +139,7 @@ zram_max_streams() echo "FAIL can't set max_streams '$max_s', get $max_stream" i=$(($i + 1)) - echo "$sys_path = '$max_streams' ($i/$dev_num)" + echo "$sys_path = '$max_streams'" done echo "zram max streams: OK" @@ -132,15 +149,16 @@ zram_compress_alg() { echo "test that we can set compression algorithm" - local algs=$(cat /sys/block/zram0/comp_algorithm) + local i=$dev_start + local algs=$(cat /sys/block/zram${i}/comp_algorithm) echo "supported algs: $algs" - local i=0 + for alg in $zram_algs; do local sys_path="/sys/block/zram${i}/comp_algorithm" echo "$alg" > $sys_path || \ echo "FAIL can't set '$alg' to $sys_path" i=$(($i + 1)) - echo "$sys_path = '$alg' ($i/$dev_num)" + echo "$sys_path = '$alg'" done echo "zram set compression algorithm: OK" @@ -149,14 +167,14 @@ zram_compress_alg() zram_set_disksizes() { echo "set disk size to zram device(s)" - local i=0 + local i=$dev_start for ds in $zram_sizes; do local sys_path="/sys/block/zram${i}/disksize" echo "$ds" > $sys_path || \ echo "FAIL can't set '$ds' to $sys_path" i=$(($i + 1)) - echo "$sys_path = '$ds' ($i/$dev_num)" + echo "$sys_path = '$ds'" done echo "zram set disksizes: OK" @@ -166,14 +184,14 @@ zram_set_memlimit() { echo "set memory limit to zram device(s)" - local i=0 + local i=$dev_start for ds in $zram_mem_limits; do local sys_path="/sys/block/zram${i}/mem_limit" echo "$ds" > $sys_path || \ echo "FAIL can't set '$ds' to $sys_path" i=$(($i + 1)) - echo "$sys_path = '$ds' ($i/$dev_num)" + echo "$sys_path = '$ds'" done echo "zram set memory limit: OK" @@ -182,8 +200,8 @@ zram_set_memlimit() zram_makeswap() { echo "make swap with zram device(s)" - local i=0 - for i in $(seq 0 $(($dev_num - 1))); do + local i=$dev_start + for i in $(seq $dev_start $dev_end); do mkswap /dev/zram$i > err.log 2>&1 if [ $? -ne 0 ]; then cat err.log @@ -206,7 +224,7 @@ zram_makeswap() zram_swapoff() { local i= - for i in $(seq 0 $dev_makeswap); do + for i in $(seq $dev_start $dev_end); do swapoff /dev/zram$i > err.log 2>&1 if [ $? -ne 0 ]; then cat err.log @@ -220,7 +238,7 @@ zram_swapoff() zram_makefs() { - local i=0 + local i=$dev_start for fs in $zram_filesystems; do # if requested fs not supported default it to ext2 which mkfs.$fs > /dev/null 2>&1 || fs=ext2 @@ -239,7 +257,7 @@ zram_makefs() zram_mount() { local i=0 - for i in $(seq 0 $(($dev_num - 1))); do + for i in $(seq $dev_start $dev_end); do echo "mount /dev/zram$i" mkdir zram$i mount /dev/zram$i zram$i > /dev/null || \ -- 2.34.1

2 years, 10 months

1
0
0 0

[PATCH AUTOSEL 5.4 05/15] selftests/zram01.sh: Fix compression ratio calculation

by Sasha Levin

From: Yang Xu <xuyang2018.jy(a)fujitsu.com> [ Upstream commit d18da7ec3719559d6e74937266d0416e6c7e0b31 ] zram01 uses `free -m` to measure zram memory usage. The results are no sense because they are polluted by all running processes on the system. We Should only calculate the free memory delta for the current process. So use the third field of /sys/block/zram<id>/mm_stat to measure memory usage instead. The file is available since kernel 4.1. orig_data_size(first): uncompressed size of data stored in this disk. compr_data_size(second): compressed size of data stored in this disk mem_used_total(third): the amount of memory allocated for this disk Also remove useless zram cleanup call in zram_fill_fs and so we don't need to cleanup zram twice if fails. Signed-off-by: Yang Xu <xuyang2018.jy(a)fujitsu.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/zram/zram01.sh | 30 +++++++------------------- 1 file changed, 8 insertions(+), 22 deletions(-) diff --git a/tools/testing/selftests/zram/zram01.sh b/tools/testing/selftests/zram/zram01.sh index 114863d9fb876..e9e9eb777e2c7 100755 --- a/tools/testing/selftests/zram/zram01.sh +++ b/tools/testing/selftests/zram/zram01.sh @@ -33,8 +33,6 @@ zram_algs="lzo" zram_fill_fs() { - local mem_free0=$(free -m | awk 'NR==2 {print $4}') - for i in $(seq 0 $(($dev_num - 1))); do echo "fill zram$i..." local b=0 @@ -45,29 +43,17 @@ zram_fill_fs() b=$(($b + 1)) done echo "zram$i can be filled with '$b' KB" - done - local mem_free1=$(free -m | awk 'NR==2 {print $4}') - local used_mem=$(($mem_free0 - $mem_free1)) + local mem_used_total=`awk '{print $3}' "/sys/block/zram$i/mm_stat"` + local v=$((100 * 1024 * $b / $mem_used_total)) + if [ "$v" -lt 100 ]; then + echo "FAIL compression ratio: 0.$v:1" + ERR_CODE=-1 + return + fi - local total_size=0 - for sm in $zram_sizes; do - local s=$(echo $sm | sed 's/M//') - total_size=$(($total_size + $s)) + echo "zram compression ratio: $(echo "scale=2; $v / 100 " | bc):1: OK" done - - echo "zram used ${used_mem}M, zram disk sizes ${total_size}M" - - local v=$((100 * $total_size / $used_mem)) - - if [ "$v" -lt 100 ]; then - echo "FAIL compression ratio: 0.$v:1" - ERR_CODE=-1 - zram_cleanup - return - fi - - echo "zram compression ratio: $(echo "scale=2; $v / 100 " | bc):1: OK" } check_prereqs -- 2.34.1

2 years, 10 months

1
0
0 0

[PATCH AUTOSEL 5.4 04/15] selftests/zram: Skip max_comp_streams interface on newer kernel

by Sasha Levin

From: Yang Xu <xuyang2018.jy(a)fujitsu.com> [ Upstream commit fc4eb486a59d70bd35cf1209f0e68c2d8b979193 ] Since commit 43209ea2d17a ("zram: remove max_comp_streams internals"), zram has switched to per-cpu streams. Even kernel still keep this interface for some reasons, but writing to max_comp_stream doesn't take any effect. So skip it on newer kernel ie 4.7. The code that comparing kernel version is from xfstests testsuite ext4/053. Signed-off-by: Yang Xu <xuyang2018.jy(a)fujitsu.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/zram/zram_lib.sh | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/tools/testing/selftests/zram/zram_lib.sh b/tools/testing/selftests/zram/zram_lib.sh index 6f872f266fd11..f47fc0f27e99e 100755 --- a/tools/testing/selftests/zram/zram_lib.sh +++ b/tools/testing/selftests/zram/zram_lib.sh @@ -11,6 +11,9 @@ dev_mounted=-1 # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 +kernel_version=`uname -r | cut -d'.' -f1,2` +kernel_major=${kernel_version%.*} +kernel_minor=${kernel_version#*.} trap INT @@ -25,6 +28,20 @@ check_prereqs() fi } +kernel_gte() +{ + major=${1%.*} + minor=${1#*.} + + if [ $kernel_major -gt $major ]; then + return 0 + elif [[ $kernel_major -eq $major && $kernel_minor -ge $minor ]]; then + return 0 + fi + + return 1 +} + zram_cleanup() { echo "zram cleanup" @@ -86,6 +103,13 @@ zram_max_streams() { echo "set max_comp_streams to zram device(s)" + kernel_gte 4.7 + if [ $? -eq 0 ]; then + echo "The device attribute max_comp_streams was"\ + "deprecated in 4.7" + return 0 + fi + local i=0 for max_s in $zram_max_streams; do local sys_path="/sys/block/zram${i}/max_comp_streams" -- 2.34.1

2 years, 10 months

1
0
0 0

[PATCH AUTOSEL 5.4 02/15] selftests: rtc: Increase test timeout so that all tests run

by Sasha Levin

From: Nícolas F. R. A. Prado <nfraprado(a)collabora.com> [ Upstream commit f034cc1301e7d83d4ec428dd6b8ffb57ca446efb ] The timeout setting for the rtc kselftest is currently 90 seconds. This setting is used by the kselftest runner to stop running a test if it takes longer than the assigned value. However, two of the test cases inside rtc set alarms. These alarms are set to the next beginning of the minute, so each of these test cases may take up to, in the worst case, 60 seconds. In order to allow for all test cases in rtc to run, even in the worst case, when using the kselftest runner, the timeout value should be increased to at least 120. Set it to 180, so there's some additional slack. Correct operation can be tested by running the following command right after the start of a minute (low second count), and checking that all test cases run: ./run_kselftest.sh -c rtc Signed-off-by: Nícolas F. R. A. Prado <nfraprado(a)collabora.com> Acked-by: Alexandre Belloni <alexandre.belloni(a)bootlin.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/rtc/settings | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/rtc/settings b/tools/testing/selftests/rtc/settings index ba4d85f74cd6b..a953c96aa16e1 100644 --- a/tools/testing/selftests/rtc/settings +++ b/tools/testing/selftests/rtc/settings @@ -1 +1 @@ -timeout=90 +timeout=180 -- 2.34.1

2 years, 10 months

1
0
0 0

[PATCH AUTOSEL 5.10 12/27] selftests: skip mincore.check_file_mmap when fs lacks needed support

by Sasha Levin

From: Cristian Marussi <cristian.marussi(a)arm.com> [ Upstream commit dae1d8ac31896988e7313384c0370176a75e9b45 ] Report mincore.check_file_mmap as SKIP instead of FAIL if the underlying filesystem lacks support of O_TMPFILE or fallocate since such failures are not really related to mincore functionality. Cc: Ricardo Cañuelo <ricardo.canuelo(a)collabora.com> Signed-off-by: Cristian Marussi <cristian.marussi(a)arm.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- .../selftests/mincore/mincore_selftest.c | 20 +++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/tools/testing/selftests/mincore/mincore_selftest.c b/tools/testing/selftests/mincore/mincore_selftest.c index 5a1e85ff5d32a..2cf6f2f277ab8 100644 --- a/tools/testing/selftests/mincore/mincore_selftest.c +++ b/tools/testing/selftests/mincore/mincore_selftest.c @@ -208,15 +208,21 @@ TEST(check_file_mmap) errno = 0; fd = open(".", O_TMPFILE | O_RDWR, 0600); - ASSERT_NE(-1, fd) { - TH_LOG("Can't create temporary file: %s", - strerror(errno)); + if (fd < 0) { + ASSERT_EQ(errno, EOPNOTSUPP) { + TH_LOG("Can't create temporary file: %s", + strerror(errno)); + } + SKIP(goto out_free, "O_TMPFILE not supported by filesystem."); } errno = 0; retval = fallocate(fd, 0, 0, FILE_SIZE); - ASSERT_EQ(0, retval) { - TH_LOG("Error allocating space for the temporary file: %s", - strerror(errno)); + if (retval) { + ASSERT_EQ(errno, EOPNOTSUPP) { + TH_LOG("Error allocating space for the temporary file: %s", + strerror(errno)); + } + SKIP(goto out_close, "fallocate not supported by filesystem."); } /* @@ -272,7 +278,9 @@ TEST(check_file_mmap) } munmap(addr, FILE_SIZE); +out_close: close(fd); +out_free: free(vec); } -- 2.34.1

2 years, 10 months

1
0
0 0

[PATCH AUTOSEL 5.10 11/27] selftests: openat2: Skip testcases that fail with EOPNOTSUPP

by Sasha Levin

From: Cristian Marussi <cristian.marussi(a)arm.com> [ Upstream commit ac9e0a250bb155078601a5b999aab05f2a04d1ab ] Skip testcases that fail since the requested valid flags combination is not supported by the underlying filesystem. Cc: Aleksa Sarai <cyphar(a)cyphar.com> Signed-off-by: Cristian Marussi <cristian.marussi(a)arm.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/openat2/openat2_test.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/openat2/openat2_test.c b/tools/testing/selftests/openat2/openat2_test.c index b386367c606b1..453152b58e7f0 100644 --- a/tools/testing/selftests/openat2/openat2_test.c +++ b/tools/testing/selftests/openat2/openat2_test.c @@ -244,6 +244,16 @@ void test_openat2_flags(void) unlink(path); fd = sys_openat2(AT_FDCWD, path, &test->how); + if (fd < 0 && fd == -EOPNOTSUPP) { + /* + * Skip the testcase if it failed because not supported + * by FS. (e.g. a valid O_TMPFILE combination on NFS) + */ + ksft_test_result_skip("openat2 with %s fails with %d (%s)\n", + test->name, fd, strerror(-fd)); + goto next; + } + if (test->err >= 0) failed = (fd < 0); else @@ -288,7 +298,7 @@ void test_openat2_flags(void) else resultfn("openat2 with %s fails with %d (%s)\n", test->name, test->err, strerror(-test->err)); - +next: free(fdpath); fflush(stdout); } -- 2.34.1

2 years, 10 months

1
0
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror February 2022