February 2022 - Linux-kselftest-mirror

[PATCH AUTOSEL 5.15 10/36] selftests/zram: Adapt the situation that /dev/zram0 is being used

by Sasha Levin

From: Yang Xu <xuyang2018.jy(a)fujitsu.com> [ Upstream commit 01dabed20573804750af5c7bf8d1598a6bf7bf6e ] If zram-generator package is installed and works, then we can not remove zram module because zram swap is being used. This case needs a clean zram environment, change this test by using hot_add/hot_remove interface. So even zram device is being used, we still can add zram device and remove them in cleanup. The two interface was introduced since kernel commit 6566d1a32bf7("zram: add dynamic device add/remove functionality") in v4.2-rc1. If kernel supports these two interface, we use hot_add/hot_remove to slove this problem, if not, just check whether zram is being used or built in, then skip it on old kernel. Signed-off-by: Yang Xu <xuyang2018.jy(a)fujitsu.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/zram/zram.sh | 15 +--- tools/testing/selftests/zram/zram01.sh | 3 +- tools/testing/selftests/zram/zram02.sh | 1 - tools/testing/selftests/zram/zram_lib.sh | 110 +++++++++++++---------- 4 files changed, 66 insertions(+), 63 deletions(-) diff --git a/tools/testing/selftests/zram/zram.sh b/tools/testing/selftests/zram/zram.sh index 232e958ec4547..b0b91d9b0dc21 100755 --- a/tools/testing/selftests/zram/zram.sh +++ b/tools/testing/selftests/zram/zram.sh @@ -2,9 +2,6 @@ # SPDX-License-Identifier: GPL-2.0 TCID="zram.sh" -# Kselftest framework requirement - SKIP code is 4. -ksft_skip=4 - . ./zram_lib.sh run_zram () { @@ -18,14 +15,4 @@ echo "" check_prereqs -# check zram module exists -MODULE_PATH=/lib/modules/`uname -r`/kernel/drivers/block/zram/zram.ko -if [ -f $MODULE_PATH ]; then - run_zram -elif [ -b /dev/zram0 ]; then - run_zram -else - echo "$TCID : No zram.ko module or /dev/zram0 device file not found" - echo "$TCID : CONFIG_ZRAM is not set" - exit $ksft_skip -fi +run_zram diff --git a/tools/testing/selftests/zram/zram01.sh b/tools/testing/selftests/zram/zram01.sh index e9e9eb777e2c7..8f4affe34f3e4 100755 --- a/tools/testing/selftests/zram/zram01.sh +++ b/tools/testing/selftests/zram/zram01.sh @@ -33,7 +33,7 @@ zram_algs="lzo" zram_fill_fs() { - for i in $(seq 0 $(($dev_num - 1))); do + for i in $(seq $dev_start $dev_end); do echo "fill zram$i..." local b=0 while [ true ]; do @@ -67,7 +67,6 @@ zram_mount zram_fill_fs zram_cleanup -zram_unload if [ $ERR_CODE -ne 0 ]; then echo "$TCID : [FAIL]" diff --git a/tools/testing/selftests/zram/zram02.sh b/tools/testing/selftests/zram/zram02.sh index e83b404807c09..2418b0c4ed136 100755 --- a/tools/testing/selftests/zram/zram02.sh +++ b/tools/testing/selftests/zram/zram02.sh @@ -36,7 +36,6 @@ zram_set_memlimit zram_makeswap zram_swapoff zram_cleanup -zram_unload if [ $ERR_CODE -ne 0 ]; then echo "$TCID : [FAIL]" diff --git a/tools/testing/selftests/zram/zram_lib.sh b/tools/testing/selftests/zram/zram_lib.sh index f47fc0f27e99e..21ec1966de76c 100755 --- a/tools/testing/selftests/zram/zram_lib.sh +++ b/tools/testing/selftests/zram/zram_lib.sh @@ -5,10 +5,12 @@ # Author: Alexey Kodanev <alexey.kodanev(a)oracle.com> # Modified: Naresh Kamboju <naresh.kamboju(a)linaro.org> -MODULE=0 dev_makeswap=-1 dev_mounted=-1 - +dev_start=0 +dev_end=-1 +module_load=-1 +sys_control=-1 # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 kernel_version=`uname -r | cut -d'.' -f1,2` @@ -46,57 +48,72 @@ zram_cleanup() { echo "zram cleanup" local i= - for i in $(seq 0 $dev_makeswap); do + for i in $(seq $dev_start $dev_makeswap); do swapoff /dev/zram$i done - for i in $(seq 0 $dev_mounted); do + for i in $(seq $dev_start $dev_mounted); do umount /dev/zram$i done - for i in $(seq 0 $(($dev_num - 1))); do + for i in $(seq $dev_start $dev_end); do echo 1 > /sys/block/zram${i}/reset rm -rf zram$i done -} + if [ $sys_control -eq 1 ]; then + for i in $(seq $dev_start $dev_end); do + echo $i > /sys/class/zram-control/hot_remove + done + fi -zram_unload() -{ - if [ $MODULE -ne 0 ] ; then - echo "zram rmmod zram" + if [ $module_load -eq 1 ]; then rmmod zram > /dev/null 2>&1 fi } zram_load() { - # check zram module exists - MODULE_PATH=/lib/modules/`uname -r`/kernel/drivers/block/zram/zram.ko - if [ -f $MODULE_PATH ]; then - MODULE=1 - echo "create '$dev_num' zram device(s)" - modprobe zram num_devices=$dev_num - if [ $? -ne 0 ]; then - echo "failed to insert zram module" - exit 1 - fi - - dev_num_created=$(ls /dev/zram* | wc -w) + echo "create '$dev_num' zram device(s)" + + # zram module loaded, new kernel + if [ -d "/sys/class/zram-control" ]; then + echo "zram modules already loaded, kernel supports" \ + "zram-control interface" + dev_start=$(ls /dev/zram* | wc -w) + dev_end=$(($dev_start + $dev_num - 1)) + sys_control=1 + + for i in $(seq $dev_start $dev_end); do + cat /sys/class/zram-control/hot_add > /dev/null + done + + echo "all zram devices (/dev/zram$dev_start~$dev_end" \ + "successfully created" + return 0 + fi - if [ "$dev_num_created" -ne "$dev_num" ]; then - echo "unexpected num of devices: $dev_num_created" - ERR_CODE=-1 + # detect old kernel or built-in + modprobe zram num_devices=$dev_num + if [ ! -d "/sys/class/zram-control" ]; then + if grep -q '^zram' /proc/modules; then + rmmod zram > /dev/null 2>&1 + if [ $? -ne 0 ]; then + echo "zram module is being used on old kernel" \ + "without zram-control interface" + exit $ksft_skip + fi else - echo "zram load module successful" + echo "test needs CONFIG_ZRAM=m on old kernel without" \ + "zram-control interface" + exit $ksft_skip fi - elif [ -b /dev/zram0 ]; then - echo "/dev/zram0 device file found: OK" - else - echo "ERROR: No zram.ko module or no /dev/zram0 device found" - echo "$TCID : CONFIG_ZRAM is not set" - exit 1 + modprobe zram num_devices=$dev_num fi + + module_load=1 + dev_end=$(($dev_num - 1)) + echo "all zram devices (/dev/zram0~$dev_end) successfully created" } zram_max_streams() @@ -110,7 +127,7 @@ zram_max_streams() return 0 fi - local i=0 + local i=$dev_start for max_s in $zram_max_streams; do local sys_path="/sys/block/zram${i}/max_comp_streams" echo $max_s > $sys_path || \ @@ -122,7 +139,7 @@ zram_max_streams() echo "FAIL can't set max_streams '$max_s', get $max_stream" i=$(($i + 1)) - echo "$sys_path = '$max_streams' ($i/$dev_num)" + echo "$sys_path = '$max_streams'" done echo "zram max streams: OK" @@ -132,15 +149,16 @@ zram_compress_alg() { echo "test that we can set compression algorithm" - local algs=$(cat /sys/block/zram0/comp_algorithm) + local i=$dev_start + local algs=$(cat /sys/block/zram${i}/comp_algorithm) echo "supported algs: $algs" - local i=0 + for alg in $zram_algs; do local sys_path="/sys/block/zram${i}/comp_algorithm" echo "$alg" > $sys_path || \ echo "FAIL can't set '$alg' to $sys_path" i=$(($i + 1)) - echo "$sys_path = '$alg' ($i/$dev_num)" + echo "$sys_path = '$alg'" done echo "zram set compression algorithm: OK" @@ -149,14 +167,14 @@ zram_compress_alg() zram_set_disksizes() { echo "set disk size to zram device(s)" - local i=0 + local i=$dev_start for ds in $zram_sizes; do local sys_path="/sys/block/zram${i}/disksize" echo "$ds" > $sys_path || \ echo "FAIL can't set '$ds' to $sys_path" i=$(($i + 1)) - echo "$sys_path = '$ds' ($i/$dev_num)" + echo "$sys_path = '$ds'" done echo "zram set disksizes: OK" @@ -166,14 +184,14 @@ zram_set_memlimit() { echo "set memory limit to zram device(s)" - local i=0 + local i=$dev_start for ds in $zram_mem_limits; do local sys_path="/sys/block/zram${i}/mem_limit" echo "$ds" > $sys_path || \ echo "FAIL can't set '$ds' to $sys_path" i=$(($i + 1)) - echo "$sys_path = '$ds' ($i/$dev_num)" + echo "$sys_path = '$ds'" done echo "zram set memory limit: OK" @@ -182,8 +200,8 @@ zram_set_memlimit() zram_makeswap() { echo "make swap with zram device(s)" - local i=0 - for i in $(seq 0 $(($dev_num - 1))); do + local i=$dev_start + for i in $(seq $dev_start $dev_end); do mkswap /dev/zram$i > err.log 2>&1 if [ $? -ne 0 ]; then cat err.log @@ -206,7 +224,7 @@ zram_makeswap() zram_swapoff() { local i= - for i in $(seq 0 $dev_makeswap); do + for i in $(seq $dev_start $dev_end); do swapoff /dev/zram$i > err.log 2>&1 if [ $? -ne 0 ]; then cat err.log @@ -220,7 +238,7 @@ zram_swapoff() zram_makefs() { - local i=0 + local i=$dev_start for fs in $zram_filesystems; do # if requested fs not supported default it to ext2 which mkfs.$fs > /dev/null 2>&1 || fs=ext2 @@ -239,7 +257,7 @@ zram_makefs() zram_mount() { local i=0 - for i in $(seq 0 $(($dev_num - 1))); do + for i in $(seq $dev_start $dev_end); do echo "mount /dev/zram$i" mkdir zram$i mount /dev/zram$i zram$i > /dev/null || \ -- 2.34.1

2 years, 3 months

1
0
0 0

[PATCH AUTOSEL 5.15 09/36] selftests/zram01.sh: Fix compression ratio calculation

by Sasha Levin

From: Yang Xu <xuyang2018.jy(a)fujitsu.com> [ Upstream commit d18da7ec3719559d6e74937266d0416e6c7e0b31 ] zram01 uses `free -m` to measure zram memory usage. The results are no sense because they are polluted by all running processes on the system. We Should only calculate the free memory delta for the current process. So use the third field of /sys/block/zram<id>/mm_stat to measure memory usage instead. The file is available since kernel 4.1. orig_data_size(first): uncompressed size of data stored in this disk. compr_data_size(second): compressed size of data stored in this disk mem_used_total(third): the amount of memory allocated for this disk Also remove useless zram cleanup call in zram_fill_fs and so we don't need to cleanup zram twice if fails. Signed-off-by: Yang Xu <xuyang2018.jy(a)fujitsu.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/zram/zram01.sh | 30 +++++++------------------- 1 file changed, 8 insertions(+), 22 deletions(-) diff --git a/tools/testing/selftests/zram/zram01.sh b/tools/testing/selftests/zram/zram01.sh index 114863d9fb876..e9e9eb777e2c7 100755 --- a/tools/testing/selftests/zram/zram01.sh +++ b/tools/testing/selftests/zram/zram01.sh @@ -33,8 +33,6 @@ zram_algs="lzo" zram_fill_fs() { - local mem_free0=$(free -m | awk 'NR==2 {print $4}') - for i in $(seq 0 $(($dev_num - 1))); do echo "fill zram$i..." local b=0 @@ -45,29 +43,17 @@ zram_fill_fs() b=$(($b + 1)) done echo "zram$i can be filled with '$b' KB" - done - local mem_free1=$(free -m | awk 'NR==2 {print $4}') - local used_mem=$(($mem_free0 - $mem_free1)) + local mem_used_total=`awk '{print $3}' "/sys/block/zram$i/mm_stat"` + local v=$((100 * 1024 * $b / $mem_used_total)) + if [ "$v" -lt 100 ]; then + echo "FAIL compression ratio: 0.$v:1" + ERR_CODE=-1 + return + fi - local total_size=0 - for sm in $zram_sizes; do - local s=$(echo $sm | sed 's/M//') - total_size=$(($total_size + $s)) + echo "zram compression ratio: $(echo "scale=2; $v / 100 " | bc):1: OK" done - - echo "zram used ${used_mem}M, zram disk sizes ${total_size}M" - - local v=$((100 * $total_size / $used_mem)) - - if [ "$v" -lt 100 ]; then - echo "FAIL compression ratio: 0.$v:1" - ERR_CODE=-1 - zram_cleanup - return - fi - - echo "zram compression ratio: $(echo "scale=2; $v / 100 " | bc):1: OK" } check_prereqs -- 2.34.1

2 years, 3 months

1
0
0 0

[PATCH AUTOSEL 5.15 08/36] selftests/zram: Skip max_comp_streams interface on newer kernel

by Sasha Levin

From: Yang Xu <xuyang2018.jy(a)fujitsu.com> [ Upstream commit fc4eb486a59d70bd35cf1209f0e68c2d8b979193 ] Since commit 43209ea2d17a ("zram: remove max_comp_streams internals"), zram has switched to per-cpu streams. Even kernel still keep this interface for some reasons, but writing to max_comp_stream doesn't take any effect. So skip it on newer kernel ie 4.7. The code that comparing kernel version is from xfstests testsuite ext4/053. Signed-off-by: Yang Xu <xuyang2018.jy(a)fujitsu.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/zram/zram_lib.sh | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/tools/testing/selftests/zram/zram_lib.sh b/tools/testing/selftests/zram/zram_lib.sh index 6f872f266fd11..f47fc0f27e99e 100755 --- a/tools/testing/selftests/zram/zram_lib.sh +++ b/tools/testing/selftests/zram/zram_lib.sh @@ -11,6 +11,9 @@ dev_mounted=-1 # Kselftest framework requirement - SKIP code is 4. ksft_skip=4 +kernel_version=`uname -r | cut -d'.' -f1,2` +kernel_major=${kernel_version%.*} +kernel_minor=${kernel_version#*.} trap INT @@ -25,6 +28,20 @@ check_prereqs() fi } +kernel_gte() +{ + major=${1%.*} + minor=${1#*.} + + if [ $kernel_major -gt $major ]; then + return 0 + elif [[ $kernel_major -eq $major && $kernel_minor -ge $minor ]]; then + return 0 + fi + + return 1 +} + zram_cleanup() { echo "zram cleanup" @@ -86,6 +103,13 @@ zram_max_streams() { echo "set max_comp_streams to zram device(s)" + kernel_gte 4.7 + if [ $? -eq 0 ]; then + echo "The device attribute max_comp_streams was"\ + "deprecated in 4.7" + return 0 + fi + local i=0 for max_s in $zram_max_streams; do local sys_path="/sys/block/zram${i}/max_comp_streams" -- 2.34.1

2 years, 3 months

1
0
0 0

[PATCH AUTOSEL 5.15 06/36] selftests: netfilter: check stateless nat udp checksum fixup

by Sasha Levin

From: Florian Westphal <fw(a)strlen.de> [ Upstream commit aad51ca71ad83273e8826d6cfdcf53c98748d1fa ] Add a test that sends large udp packet (which is fragmented) via a stateless nft nat rule, i.e. 'ip saddr set 10.2.3.4' and check that the datagram is received by peer. On kernels without commit 4e1860a38637 ("netfilter: nft_payload: do not update layer 4 checksum when mangling fragments")', this will fail with: cmp: EOF on /tmp/tmp.V1q0iXJyQF which is empty -rw------- 1 root root 4096 Jan 24 22:03 /tmp/tmp.Aaqnq4rBKS -rw------- 1 root root 0 Jan 24 22:03 /tmp/tmp.V1q0iXJyQF ERROR: in and output file mismatch when checking udp with stateless nat FAIL: nftables v1.0.0 (Fearless Fosdick #2) On patched kernels, this will show: PASS: IP statless for ns2-PFp89amx Signed-off-by: Florian Westphal <fw(a)strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo(a)netfilter.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/netfilter/nft_nat.sh | 152 +++++++++++++++++++ 1 file changed, 152 insertions(+) diff --git a/tools/testing/selftests/netfilter/nft_nat.sh b/tools/testing/selftests/netfilter/nft_nat.sh index da1c1e4b6c86b..781fa2d9ea9d5 100755 --- a/tools/testing/selftests/netfilter/nft_nat.sh +++ b/tools/testing/selftests/netfilter/nft_nat.sh @@ -885,6 +885,144 @@ EOF ip netns exec "$ns0" nft delete table $family nat } +test_stateless_nat_ip() +{ + local lret=0 + + ip netns exec "$ns0" sysctl net.ipv4.conf.veth0.forwarding=1 > /dev/null + ip netns exec "$ns0" sysctl net.ipv4.conf.veth1.forwarding=1 > /dev/null + + ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannot ping $ns1 from $ns2 before loading stateless rules" + return 1 + fi + +ip netns exec "$ns0" nft -f /dev/stdin <<EOF +table ip stateless { + map xlate_in { + typeof meta iifname . ip saddr . ip daddr : ip daddr + elements = { + "veth1" . 10.0.2.99 . 10.0.1.99 : 10.0.2.2, + } + } + map xlate_out { + typeof meta iifname . ip saddr . ip daddr : ip daddr + elements = { + "veth0" . 10.0.1.99 . 10.0.2.2 : 10.0.2.99 + } + } + + chain prerouting { + type filter hook prerouting priority -400; policy accept; + ip saddr set meta iifname . ip saddr . ip daddr map @xlate_in + ip daddr set meta iifname . ip saddr . ip daddr map @xlate_out + } +} +EOF + if [ $? -ne 0 ]; then + echo "SKIP: Could not add ip statless rules" + return $ksft_skip + fi + + reset_counters + + ip netns exec "$ns2" ping -q -c 1 10.0.1.99 > /dev/null # ping ns2->ns1 + if [ $? -ne 0 ] ; then + echo "ERROR: cannot ping $ns1 from $ns2 with stateless rules" + lret=1 + fi + + # ns1 should have seen packets from .2.2, due to stateless rewrite. + expect="packets 1 bytes 84" + cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0insl | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter "$ns1" ns0insl "$expect" "test_stateless 1" + lret=1 + fi + + for dir in "in" "out" ; do + cnt=$(ip netns exec "$ns2" nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter "$ns2" ns1$dir "$expect" "test_stateless 2" + lret=1 + fi + done + + # ns1 should not have seen packets from ns2, due to masquerade + expect="packets 0 bytes 0" + for dir in "in" "out" ; do + cnt=$(ip netns exec "$ns1" nft list counter inet filter ns2${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter "$ns1" ns0$dir "$expect" "test_stateless 3" + lret=1 + fi + + cnt=$(ip netns exec "$ns0" nft list counter inet filter ns1${dir} | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter "$ns0" ns1$dir "$expect" "test_stateless 4" + lret=1 + fi + done + + reset_counters + + socat -h > /dev/null 2>&1 + if [ $? -ne 0 ];then + echo "SKIP: Could not run stateless nat frag test without socat tool" + if [ $lret -eq 0 ]; then + return $ksft_skip + fi + + ip netns exec "$ns0" nft delete table ip stateless + return $lret + fi + + local tmpfile=$(mktemp) + dd if=/dev/urandom of=$tmpfile bs=4096 count=1 2>/dev/null + + local outfile=$(mktemp) + ip netns exec "$ns1" timeout 3 socat -u UDP4-RECV:4233 OPEN:$outfile < /dev/null & + sc_r=$! + + sleep 1 + # re-do with large ping -> ip fragmentation + ip netns exec "$ns2" timeout 3 socat - UDP4-SENDTO:"10.0.1.99:4233" < "$tmpfile" > /dev/null + if [ $? -ne 0 ] ; then + echo "ERROR: failed to test udp $ns1 to $ns2 with stateless ip nat" 1>&2 + lret=1 + fi + + wait + + cmp "$tmpfile" "$outfile" + if [ $? -ne 0 ]; then + ls -l "$tmpfile" "$outfile" + echo "ERROR: in and output file mismatch when checking udp with stateless nat" 1>&2 + lret=1 + fi + + rm -f "$tmpfile" "$outfile" + + # ns1 should have seen packets from 2.2, due to stateless rewrite. + expect="packets 3 bytes 4164" + cnt=$(ip netns exec "$ns1" nft list counter inet filter ns0insl | grep -q "$expect") + if [ $? -ne 0 ]; then + bad_counter "$ns1" ns0insl "$expect" "test_stateless 5" + lret=1 + fi + + ip netns exec "$ns0" nft delete table ip stateless + if [ $? -ne 0 ]; then + echo "ERROR: Could not delete table ip stateless" 1>&2 + lret=1 + fi + + test $lret -eq 0 && echo "PASS: IP statless for $ns2" + + return $lret +} + # ip netns exec "$ns0" ping -c 1 -q 10.0.$i.99 for i in 0 1 2; do ip netns exec ns$i-$sfx nft -f /dev/stdin <<EOF @@ -951,6 +1089,19 @@ table inet filter { EOF done +# special case for stateless nat check, counter needs to +# be done before (input) ip defragmentation +ip netns exec ns1-$sfx nft -f /dev/stdin <<EOF +table inet filter { + counter ns0insl {} + + chain pre { + type filter hook prerouting priority -400; policy accept; + ip saddr 10.0.2.2 counter name "ns0insl" + } +} +EOF + sleep 3 # test basic connectivity for i in 1 2; do @@ -1005,6 +1156,7 @@ $test_inet_nat && test_redirect inet $test_inet_nat && test_redirect6 inet test_port_shadowing +test_stateless_nat_ip if [ $ret -ne 0 ];then echo -n "FAIL: " -- 2.34.1

2 years, 3 months

1
0
0 0

[PATCH AUTOSEL 5.15 05/36] kselftest: signal all child processes

by Sasha Levin

From: Li Zhijian <lizhijian(a)cn.fujitsu.com> [ Upstream commit 92d25637a3a45904292c93f1863c6bbda4e3e38f ] We have some many cases that will create child process as well, such as pidfd_wait. Previously, we will signal/kill the parent process when it is time out, but this signal will not be sent to its child process. In such case, if child process doesn't terminate itself, ksefltest framework will hang forever. Here we group all its child processes so that kill() can signal all of them in timeout. Fixed change log: Shuah Khan <skhan(a)linuxfoundation.org> Suggested-by: yang xu <xuyang2018.jy(a)cn.fujitsu.com> Signed-off-by: Li Zhijian <lizhijian(a)cn.fujitsu.com> Acked-by: Christian Brauner <christian.brauner(a)ubuntu.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/kselftest_harness.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/kselftest_harness.h b/tools/testing/selftests/kselftest_harness.h index 79a182cfa43ad..78e59620d28de 100644 --- a/tools/testing/selftests/kselftest_harness.h +++ b/tools/testing/selftests/kselftest_harness.h @@ -875,7 +875,8 @@ static void __timeout_handler(int sig, siginfo_t *info, void *ucontext) } t->timed_out = true; - kill(t->pid, SIGKILL); + // signal process group + kill(-(t->pid), SIGKILL); } void __wait_for_test(struct __test_metadata *t) @@ -985,6 +986,7 @@ void __run_test(struct __fixture_metadata *f, ksft_print_msg("ERROR SPAWNING TEST CHILD\n"); t->passed = 0; } else if (t->pid == 0) { + setpgrp(); t->fn(t, variant); if (t->skip) _exit(255); -- 2.34.1

2 years, 3 months

1
0
0 0

[PATCH AUTOSEL 5.15 04/36] selftests: rtc: Increase test timeout so that all tests run

by Sasha Levin

From: Nícolas F. R. A. Prado <nfraprado(a)collabora.com> [ Upstream commit f034cc1301e7d83d4ec428dd6b8ffb57ca446efb ] The timeout setting for the rtc kselftest is currently 90 seconds. This setting is used by the kselftest runner to stop running a test if it takes longer than the assigned value. However, two of the test cases inside rtc set alarms. These alarms are set to the next beginning of the minute, so each of these test cases may take up to, in the worst case, 60 seconds. In order to allow for all test cases in rtc to run, even in the worst case, when using the kselftest runner, the timeout value should be increased to at least 120. Set it to 180, so there's some additional slack. Correct operation can be tested by running the following command right after the start of a minute (low second count), and checking that all test cases run: ./run_kselftest.sh -c rtc Signed-off-by: Nícolas F. R. A. Prado <nfraprado(a)collabora.com> Acked-by: Alexandre Belloni <alexandre.belloni(a)bootlin.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/rtc/settings | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/tools/testing/selftests/rtc/settings b/tools/testing/selftests/rtc/settings index ba4d85f74cd6b..a953c96aa16e1 100644 --- a/tools/testing/selftests/rtc/settings +++ b/tools/testing/selftests/rtc/settings @@ -1 +1 @@ -timeout=90 +timeout=180 -- 2.34.1

2 years, 3 months

1
0
0 0

[PATCH AUTOSEL 5.15 03/36] kunit: tool: Import missing importlib.abc

by Sasha Levin

From: Michał Winiarski <michal.winiarski(a)intel.com> [ Upstream commit 235528072f28b3b0a1446279b7eaddda36dbf743 ] Python 3.10.0 contains: 9e09849d20 ("bpo-41006: importlib.util no longer imports typing (GH-20938)") It causes importlib.util to no longer import importlib.abs, which leads to the following error when trying to use kunit with qemu: AttributeError: module 'importlib' has no attribute 'abc'. Did you mean: '_abc'? Add the missing import. Signed-off-by: Michał Winiarski <michal.winiarski(a)intel.com> Reviewed-by: Daniel Latypov <dlatypov(a)google.com> Reviewed-by: Brendan Higgins <brendanhiggins(a)google.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/kunit/kunit_kernel.py | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/kunit/kunit_kernel.py b/tools/testing/kunit/kunit_kernel.py index 2c6f916ccbafa..0874e512d109b 100644 --- a/tools/testing/kunit/kunit_kernel.py +++ b/tools/testing/kunit/kunit_kernel.py @@ -6,6 +6,7 @@ # Author: Felix Guo <felixguoxiuping(a)gmail.com> # Author: Brendan Higgins <brendanhiggins(a)google.com> +import importlib.abc import importlib.util import logging import subprocess -- 2.34.1

2 years, 3 months

1
0
0 0

[PATCH AUTOSEL 5.16 26/42] kselftest: Fix vdso_test_abi return status

by Sasha Levin

From: Vincenzo Frascino <vincenzo.frascino(a)arm.com> [ Upstream commit ec049891b2dc16591813eacaddc476b3d27c8c14 ] vdso_test_abi contains a batch of tests that verify the validity of the vDSO ABI. When a vDSO symbol is not found the relevant test is skipped reporting KSFT_SKIP. All the tests return values are then added in a single variable which is checked to verify failures. This approach can have side effects which result in reporting the wrong kselftest exit status. Fix vdso_test_abi verifying the return code of each test separately. Cc: Shuah Khan <shuah(a)kernel.org> Cc: Andy Lutomirski <luto(a)kernel.org> Cc: Thomas Gleixner <tglx(a)linutronix.de> Reported-by: Cristian Marussi <cristian.marussi(a)arm.com> Signed-off-by: Vincenzo Frascino <vincenzo.frascino(a)arm.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/vDSO/vdso_test_abi.c | 135 +++++++++---------- 1 file changed, 62 insertions(+), 73 deletions(-) diff --git a/tools/testing/selftests/vDSO/vdso_test_abi.c b/tools/testing/selftests/vDSO/vdso_test_abi.c index 3d603f1394af4..883ca85424bc5 100644 --- a/tools/testing/selftests/vDSO/vdso_test_abi.c +++ b/tools/testing/selftests/vDSO/vdso_test_abi.c @@ -33,110 +33,114 @@ typedef long (*vdso_clock_gettime_t)(clockid_t clk_id, struct timespec *ts); typedef long (*vdso_clock_getres_t)(clockid_t clk_id, struct timespec *ts); typedef time_t (*vdso_time_t)(time_t *t); -static int vdso_test_gettimeofday(void) +#define VDSO_TEST_PASS_MSG() "\n%s(): PASS\n", __func__ +#define VDSO_TEST_FAIL_MSG(x) "\n%s(): %s FAIL\n", __func__, x +#define VDSO_TEST_SKIP_MSG(x) "\n%s(): SKIP: Could not find %s\n", __func__, x + +static void vdso_test_gettimeofday(void) { /* Find gettimeofday. */ vdso_gettimeofday_t vdso_gettimeofday = (vdso_gettimeofday_t)vdso_sym(version, name[0]); if (!vdso_gettimeofday) { - printf("Could not find %s\n", name[0]); - return KSFT_SKIP; + ksft_test_result_skip(VDSO_TEST_SKIP_MSG(name[0])); + return; } struct timeval tv; long ret = vdso_gettimeofday(&tv, 0); if (ret == 0) { - printf("The time is %lld.%06lld\n", - (long long)tv.tv_sec, (long long)tv.tv_usec); + ksft_print_msg("The time is %lld.%06lld\n", + (long long)tv.tv_sec, (long long)tv.tv_usec); + ksft_test_result_pass(VDSO_TEST_PASS_MSG()); } else { - printf("%s failed\n", name[0]); - return KSFT_FAIL; + ksft_test_result_fail(VDSO_TEST_FAIL_MSG(name[0])); } - - return KSFT_PASS; } -static int vdso_test_clock_gettime(clockid_t clk_id) +static void vdso_test_clock_gettime(clockid_t clk_id) { /* Find clock_gettime. */ vdso_clock_gettime_t vdso_clock_gettime = (vdso_clock_gettime_t)vdso_sym(version, name[1]); if (!vdso_clock_gettime) { - printf("Could not find %s\n", name[1]); - return KSFT_SKIP; + ksft_test_result_skip(VDSO_TEST_SKIP_MSG(name[1])); + return; } struct timespec ts; long ret = vdso_clock_gettime(clk_id, &ts); if (ret == 0) { - printf("The time is %lld.%06lld\n", - (long long)ts.tv_sec, (long long)ts.tv_nsec); + ksft_print_msg("The time is %lld.%06lld\n", + (long long)ts.tv_sec, (long long)ts.tv_nsec); + ksft_test_result_pass(VDSO_TEST_PASS_MSG()); } else { - printf("%s failed\n", name[1]); - return KSFT_FAIL; + ksft_test_result_fail(VDSO_TEST_FAIL_MSG(name[1])); } - - return KSFT_PASS; } -static int vdso_test_time(void) +static void vdso_test_time(void) { /* Find time. */ vdso_time_t vdso_time = (vdso_time_t)vdso_sym(version, name[2]); if (!vdso_time) { - printf("Could not find %s\n", name[2]); - return KSFT_SKIP; + ksft_test_result_skip(VDSO_TEST_SKIP_MSG(name[2])); + return; } long ret = vdso_time(NULL); if (ret > 0) { - printf("The time in hours since January 1, 1970 is %lld\n", + ksft_print_msg("The time in hours since January 1, 1970 is %lld\n", (long long)(ret / 3600)); + ksft_test_result_pass(VDSO_TEST_PASS_MSG()); } else { - printf("%s failed\n", name[2]); - return KSFT_FAIL; + ksft_test_result_fail(VDSO_TEST_FAIL_MSG(name[2])); } - - return KSFT_PASS; } -static int vdso_test_clock_getres(clockid_t clk_id) +static void vdso_test_clock_getres(clockid_t clk_id) { + int clock_getres_fail = 0; + /* Find clock_getres. */ vdso_clock_getres_t vdso_clock_getres = (vdso_clock_getres_t)vdso_sym(version, name[3]); if (!vdso_clock_getres) { - printf("Could not find %s\n", name[3]); - return KSFT_SKIP; + ksft_test_result_skip(VDSO_TEST_SKIP_MSG(name[3])); + return; } struct timespec ts, sys_ts; long ret = vdso_clock_getres(clk_id, &ts); if (ret == 0) { - printf("The resolution is %lld %lld\n", - (long long)ts.tv_sec, (long long)ts.tv_nsec); + ksft_print_msg("The vdso resolution is %lld %lld\n", + (long long)ts.tv_sec, (long long)ts.tv_nsec); } else { - printf("%s failed\n", name[3]); - return KSFT_FAIL; + clock_getres_fail++; } ret = syscall(SYS_clock_getres, clk_id, &sys_ts); - if ((sys_ts.tv_sec != ts.tv_sec) || (sys_ts.tv_nsec != ts.tv_nsec)) { - printf("%s failed\n", name[3]); - return KSFT_FAIL; - } + ksft_print_msg("The syscall resolution is %lld %lld\n", + (long long)sys_ts.tv_sec, (long long)sys_ts.tv_nsec); - return KSFT_PASS; + if ((sys_ts.tv_sec != ts.tv_sec) || (sys_ts.tv_nsec != ts.tv_nsec)) + clock_getres_fail++; + + if (clock_getres_fail > 0) { + ksft_test_result_fail(VDSO_TEST_FAIL_MSG(name[3])); + } else { + ksft_test_result_pass(VDSO_TEST_PASS_MSG()); + } } const char *vdso_clock_name[12] = { @@ -158,36 +162,23 @@ const char *vdso_clock_name[12] = { * This function calls vdso_test_clock_gettime and vdso_test_clock_getres * with different values for clock_id. */ -static inline int vdso_test_clock(clockid_t clock_id) +static inline void vdso_test_clock(clockid_t clock_id) { - int ret0, ret1; - - ret0 = vdso_test_clock_gettime(clock_id); - /* A skipped test is considered passed */ - if (ret0 == KSFT_SKIP) - ret0 = KSFT_PASS; - - ret1 = vdso_test_clock_getres(clock_id); - /* A skipped test is considered passed */ - if (ret1 == KSFT_SKIP) - ret1 = KSFT_PASS; + ksft_print_msg("\nclock_id: %s\n", vdso_clock_name[clock_id]); - ret0 += ret1; + vdso_test_clock_gettime(clock_id); - printf("clock_id: %s", vdso_clock_name[clock_id]); - - if (ret0 > 0) - printf(" [FAIL]\n"); - else - printf(" [PASS]\n"); - - return ret0; + vdso_test_clock_getres(clock_id); } +#define VDSO_TEST_PLAN 16 + int main(int argc, char **argv) { unsigned long sysinfo_ehdr = getauxval(AT_SYSINFO_EHDR); - int ret; + + ksft_print_header(); + ksft_set_plan(VDSO_TEST_PLAN); if (!sysinfo_ehdr) { printf("AT_SYSINFO_EHDR is not present!\n"); @@ -201,44 +192,42 @@ int main(int argc, char **argv) vdso_init_from_sysinfo_ehdr(getauxval(AT_SYSINFO_EHDR)); - ret = vdso_test_gettimeofday(); + vdso_test_gettimeofday(); #if _POSIX_TIMERS > 0 #ifdef CLOCK_REALTIME - ret += vdso_test_clock(CLOCK_REALTIME); + vdso_test_clock(CLOCK_REALTIME); #endif #ifdef CLOCK_BOOTTIME - ret += vdso_test_clock(CLOCK_BOOTTIME); + vdso_test_clock(CLOCK_BOOTTIME); #endif #ifdef CLOCK_TAI - ret += vdso_test_clock(CLOCK_TAI); + vdso_test_clock(CLOCK_TAI); #endif #ifdef CLOCK_REALTIME_COARSE - ret += vdso_test_clock(CLOCK_REALTIME_COARSE); + vdso_test_clock(CLOCK_REALTIME_COARSE); #endif #ifdef CLOCK_MONOTONIC - ret += vdso_test_clock(CLOCK_MONOTONIC); + vdso_test_clock(CLOCK_MONOTONIC); #endif #ifdef CLOCK_MONOTONIC_RAW - ret += vdso_test_clock(CLOCK_MONOTONIC_RAW); + vdso_test_clock(CLOCK_MONOTONIC_RAW); #endif #ifdef CLOCK_MONOTONIC_COARSE - ret += vdso_test_clock(CLOCK_MONOTONIC_COARSE); + vdso_test_clock(CLOCK_MONOTONIC_COARSE); #endif #endif - ret += vdso_test_time(); - - if (ret > 0) - return KSFT_FAIL; + vdso_test_time(); - return KSFT_PASS; + ksft_print_cnts(); + return ksft_get_fail_cnt() == 0 ? KSFT_PASS : KSFT_FAIL; } -- 2.34.1

2 years, 3 months

1
0
0 0

[PATCH AUTOSEL 5.16 17/42] selftests: skip mincore.check_file_mmap when fs lacks needed support

by Sasha Levin

From: Cristian Marussi <cristian.marussi(a)arm.com> [ Upstream commit dae1d8ac31896988e7313384c0370176a75e9b45 ] Report mincore.check_file_mmap as SKIP instead of FAIL if the underlying filesystem lacks support of O_TMPFILE or fallocate since such failures are not really related to mincore functionality. Cc: Ricardo Cañuelo <ricardo.canuelo(a)collabora.com> Signed-off-by: Cristian Marussi <cristian.marussi(a)arm.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- .../selftests/mincore/mincore_selftest.c | 20 +++++++++++++------ 1 file changed, 14 insertions(+), 6 deletions(-) diff --git a/tools/testing/selftests/mincore/mincore_selftest.c b/tools/testing/selftests/mincore/mincore_selftest.c index e54106643337b..4c88238fc8f05 100644 --- a/tools/testing/selftests/mincore/mincore_selftest.c +++ b/tools/testing/selftests/mincore/mincore_selftest.c @@ -207,15 +207,21 @@ TEST(check_file_mmap) errno = 0; fd = open(".", O_TMPFILE | O_RDWR, 0600); - ASSERT_NE(-1, fd) { - TH_LOG("Can't create temporary file: %s", - strerror(errno)); + if (fd < 0) { + ASSERT_EQ(errno, EOPNOTSUPP) { + TH_LOG("Can't create temporary file: %s", + strerror(errno)); + } + SKIP(goto out_free, "O_TMPFILE not supported by filesystem."); } errno = 0; retval = fallocate(fd, 0, 0, FILE_SIZE); - ASSERT_EQ(0, retval) { - TH_LOG("Error allocating space for the temporary file: %s", - strerror(errno)); + if (retval) { + ASSERT_EQ(errno, EOPNOTSUPP) { + TH_LOG("Error allocating space for the temporary file: %s", + strerror(errno)); + } + SKIP(goto out_close, "fallocate not supported by filesystem."); } /* @@ -271,7 +277,9 @@ TEST(check_file_mmap) } munmap(addr, FILE_SIZE); +out_close: close(fd); +out_free: free(vec); } -- 2.34.1

2 years, 3 months

1
0
0 0

[PATCH AUTOSEL 5.16 16/42] selftests: openat2: Skip testcases that fail with EOPNOTSUPP

by Sasha Levin

From: Cristian Marussi <cristian.marussi(a)arm.com> [ Upstream commit ac9e0a250bb155078601a5b999aab05f2a04d1ab ] Skip testcases that fail since the requested valid flags combination is not supported by the underlying filesystem. Cc: Aleksa Sarai <cyphar(a)cyphar.com> Signed-off-by: Cristian Marussi <cristian.marussi(a)arm.com> Signed-off-by: Shuah Khan <skhan(a)linuxfoundation.org> Signed-off-by: Sasha Levin <sashal(a)kernel.org> --- tools/testing/selftests/openat2/openat2_test.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/openat2/openat2_test.c b/tools/testing/selftests/openat2/openat2_test.c index 1bddbe934204c..7fb902099de45 100644 --- a/tools/testing/selftests/openat2/openat2_test.c +++ b/tools/testing/selftests/openat2/openat2_test.c @@ -259,6 +259,16 @@ void test_openat2_flags(void) unlink(path); fd = sys_openat2(AT_FDCWD, path, &test->how); + if (fd < 0 && fd == -EOPNOTSUPP) { + /* + * Skip the testcase if it failed because not supported + * by FS. (e.g. a valid O_TMPFILE combination on NFS) + */ + ksft_test_result_skip("openat2 with %s fails with %d (%s)\n", + test->name, fd, strerror(-fd)); + goto next; + } + if (test->err >= 0) failed = (fd < 0); else @@ -303,7 +313,7 @@ void test_openat2_flags(void) else resultfn("openat2 with %s fails with %d (%s)\n", test->name, test->err, strerror(-test->err)); - +next: free(fdpath); fflush(stdout); } -- 2.34.1

2 years, 3 months

1
0
0 0

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror February 2022