Add support for (yet again) more RVA23U64 missing extensions. Add
support for Zcmop, Zca, Zcf, Zcd and Zcb extensions isa string parsing,
hwprobe and kvm support. Zce, Zcmt and Zcmp extensions have been left
out since they target microcontrollers/embedded CPUs and are not needed
by RVA23U64.
Since Zc* extensions states that C implies Zca, Zcf (if F and RV32), Zcd
(if D), this series modifies the way ISA string is parsed and now does
it in two phases. First one parses the string and the second one
validates it for the final ISA description.
This series is based on the Zimop one [1]. An additional fix [2] should
be applied to correctly test that series.
Link: https://lore.kernel.org/linux-riscv/20240404103254.1752834-1-cleger@rivosin… [1]
Link: https://lore.kernel.org/all/20240409143839.558784-1-cleger@rivosinc.com/ [2]
---
v3:
- Fix typo "exists" -> "exist"
- Remove C implies Zca, Zcd, Zcf, dt-bindings rules
- Rework ISA string resolver to handle dependencies
- v2: https://lore.kernel.org/all/20240418124300.1387978-1-cleger@rivosinc.com/
v2:
- Add Zc* dependencies validation in dt-bindings
- v1: https://lore.kernel.org/lkml/20240410091106.749233-1-cleger@rivosinc.com/
Clément Léger (11):
dt-bindings: riscv: add Zca, Zcf, Zcd and Zcb ISA extension
description
riscv: add ISA extensions validation
riscv: add ISA parsing for Zca, Zcf, Zcd and Zcb
riscv: hwprobe: export Zca, Zcf, Zcd and Zcb ISA extensions
RISC-V: KVM: Allow Zca, Zcf, Zcd and Zcb extensions for Guest/VM
KVM: riscv: selftests: Add some Zc* extensions to get-reg-list test
dt-bindings: riscv: add Zcmop ISA extension description
riscv: add ISA extension parsing for Zcmop
riscv: hwprobe: export Zcmop ISA extension
RISC-V: KVM: Allow Zcmop extension for Guest/VM
KVM: riscv: selftests: Add Zcmop extension to get-reg-list test
Documentation/arch/riscv/hwprobe.rst | 24 ++
.../devicetree/bindings/riscv/extensions.yaml | 90 +++++++
arch/riscv/include/asm/cpufeature.h | 1 +
arch/riscv/include/asm/hwcap.h | 5 +
arch/riscv/include/uapi/asm/hwprobe.h | 5 +
arch/riscv/include/uapi/asm/kvm.h | 5 +
arch/riscv/kernel/cpufeature.c | 249 ++++++++++++------
arch/riscv/kernel/sys_hwprobe.c | 5 +
arch/riscv/kvm/vcpu_onereg.c | 10 +
.../selftests/kvm/riscv/get-reg-list.c | 20 ++
10 files changed, 329 insertions(+), 85 deletions(-)
--
2.43.0
I had to explain how to run the driver tests twice already.
Improve the README so we can just point to it.
Improve the config validation.
v2:
- use split() in patch 2
- more validation in last patch
v1: https://lore.kernel.org/r/20240424221444.4194069-1-kuba@kernel.org/
Jakub Kicinski (3):
selftests: drv-net: extend the README with more info and example
selftests: drv-net: reimplement the config parser
selftests: drv-net: validate the environment
.../testing/selftests/drivers/net/README.rst | 97 ++++++++++++++++---
.../selftests/drivers/net/lib/py/env.py | 51 +++++++---
2 files changed, 124 insertions(+), 24 deletions(-)
--
2.44.0
Document support for thead vendor extensions using the key
RISCV_HWPROBE_KEY_VENDOR_EXT_THEAD_0 and xtheadvector extension using
the key RISCV_HWPROBE_VENDOR_EXT_XTHEADVECTOR.
Signed-off-by: Charlie Jenkins <charlie(a)rivosinc.com>
---
Documentation/arch/riscv/hwprobe.rst | 10 ++++++++++
1 file changed, 10 insertions(+)
diff --git a/Documentation/arch/riscv/hwprobe.rst b/Documentation/arch/riscv/hwprobe.rst
index b2bcc9eed9aa..b2bb305140aa 100644
--- a/Documentation/arch/riscv/hwprobe.rst
+++ b/Documentation/arch/riscv/hwprobe.rst
@@ -210,3 +210,13 @@ The following keys are defined:
* :c:macro:`RISCV_HWPROBE_KEY_ZICBOZ_BLOCK_SIZE`: An unsigned int which
represents the size of the Zicboz block in bytes.
+
+* :c:macro:`RISCV_HWPROBE_KEY_VENDOR_EXT_THEAD_0`: A bitmask containing the
+ thead vendor extensions that are compatible with the
+ :c:macro:`RISCV_HWPROBE_BASE_BEHAVIOR_IMA`: base system behavior.
+
+ * T-HEAD
+
+ * :c:macro:`RISCV_HWPROBE_VENDOR_EXT_XTHEADVECTOR`: The xtheadvector vendor
+ extension is supported in the T-Head ISA extensions spec starting from
+ commit a18c801634 ("Add T-Head VECTOR vendor extension. ").
--
2.44.0
xtheadvector uses different encodings than standard vector for
vsetvli and vector loads/stores. Write the instruction formats to be
used in assembly code.
Co-developed-by: Heiko Stuebner <heiko(a)sntech.de>
Signed-off-by: Charlie Jenkins <charlie(a)rivosinc.com>
---
arch/riscv/include/asm/vendor_extensions/thead.h | 26 ++++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/arch/riscv/include/asm/vendor_extensions/thead.h b/arch/riscv/include/asm/vendor_extensions/thead.h
index 92eec729888d..6e3c85351f82 100644
--- a/arch/riscv/include/asm/vendor_extensions/thead.h
+++ b/arch/riscv/include/asm/vendor_extensions/thead.h
@@ -16,4 +16,30 @@
extern const struct riscv_isa_vendor_ext_data_list riscv_isa_vendor_ext_list_thead;
+/* Extension specific helpers */
+
+/*
+ * Vector 0.7.1 as used for example on T-Head Xuantie cores, uses an older
+ * encoding for vsetvli (ta, ma vs. d1), so provide an instruction for
+ * vsetvli t4, x0, e8, m8, d1
+ */
+#define THEAD_VSETVLI_T4X0E8M8D1 ".long 0x00307ed7\n\t"
+#define THEAD_VSETVLI_X0X0E8M8D1 ".long 0x00307057\n\t"
+
+/*
+ * While in theory, the vector-0.7.1 vsb.v and vlb.v result in the same
+ * encoding as the standard vse8.v and vle8.v, compilers seem to optimize
+ * the call resulting in a different encoding and then using a value for
+ * the "mop" field that is not part of vector-0.7.1
+ * So encode specific variants for vstate_save and _restore.
+ */
+#define THEAD_VSB_V_V0T0 ".long 0x02028027\n\t"
+#define THEAD_VSB_V_V8T0 ".long 0x02028427\n\t"
+#define THEAD_VSB_V_V16T0 ".long 0x02028827\n\t"
+#define THEAD_VSB_V_V24T0 ".long 0x02028c27\n\t"
+#define THEAD_VLB_V_V0T0 ".long 0x012028007\n\t"
+#define THEAD_VLB_V_V8T0 ".long 0x012028407\n\t"
+#define THEAD_VLB_V_V16T0 ".long 0x012028807\n\t"
+#define THEAD_VLB_V_V24T0 ".long 0x012028c07\n\t"
+
#endif
--
2.44.0