January 2025 - Linux-kselftest-mirror

[PATCH net-next v7 00/11] net: Improve netns handling in rtnetlink

by Xiao Liang

This patch series includes some netns-related improvements and fixes for rtnetlink, to make link creation more intuitive: 1) Creating link in another net namespace doesn't conflict with link names in current one. 2) Refector rtnetlink link creation. Create link in target namespace directly. So that # ip link add netns ns1 link-netns ns2 tun0 type gre ... will create tun0 in ns1, rather than create it in ns2 and move to ns1. And don't conflict with another interface named "tun0" in current netns. Patch 01 serves for 1) to avoids link name conflict in different netns. To achieve 2), there're mainly 3 steps: - Patch 02 packs newlink() parameters into a struct, including the original "src_net" along with more netns context. No semantic changes are introduced. - Patch 03 ~ 07 converts device drivers to use the explicit netns extracted from params. - Patch 08 ~ 09 removes the old netns parameter, and converts rtnetlink to create device in target netns directly. Patch 10 ~ 11 adds some tests for link name and link netns. BTW please note there're some issues found in current code: - In amt_newlink() drivers/net/amt.c: amt->net = net; ... amt->stream_dev = dev_get_by_index(net, ... Uses net, but amt_lookup_upper_dev() only searches in dev_net. So the AMT device may not be properly deleted if it's in a different netns from lower dev. - In gtp_newlink() in drivers/net/gtp.c: gtp->net = src_net; ... gn = net_generic(dev_net(dev), gtp_net_id); list_add_rcu(&gtp->list, &gn->gtp_dev_list); Uses src_net, but priv is linked to list in dev_net. So it may not be properly deleted on removal of link netns. - In pfcp_newlink() in drivers/net/pfcp.c: pfcp->net = net; ... pn = net_generic(dev_net(dev), pfcp_net_id); list_add_rcu(&pfcp->list, &pn->pfcp_dev_list); Same as above. - In lowpan_newlink() in net/ieee802154/6lowpan/core.c: wdev = dev_get_by_index(dev_net(ldev), nla_get_u32(tb[IFLA_LINK])); Looks for IFLA_LINK in dev_net, but in theory the ifindex is defined in link netns. --- v7: - Add selftest kconfig. - Remove a duplicated test of ip6gre. v6: link: https://lore.kernel.org/all/20241218130909.2173-1-shaw.leon@gmail.com/ - Split prototype, driver and rtnetlink changes. - Add more tests for link netns. - Fix IPv6 tunnel net overwriten in ndo_init(). - Reorder variable declarations. - Exclude a ip_tunnel-specific patch. v5: link: https://lore.kernel.org/all/20241209140151.231257-1-shaw.leon@gmail.com/ - Fix function doc in batman-adv. - Include peer_net in rtnl newlink parameters. v4: link: https://lore.kernel.org/all/20241118143244.1773-1-shaw.leon@gmail.com/ - Pack newlink() parameters to a single struct. - Use ynl async_msg_queue.empty() in selftest. v3: link: https://lore.kernel.org/all/20241113125715.150201-1-shaw.leon@gmail.com/ - Drop "netns_atomic" flag and module parameter. Add netns parameter to newlink() instead, and convert drivers accordingly. - Move python NetNSEnter helper to net selftest lib. v2: link: https://lore.kernel.org/all/20241107133004.7469-1-shaw.leon@gmail.com/ - Check NLM_F_EXCL to ensure only link creation is affected. - Add self tests for link name/ifindex conflict and notifications in different netns. - Changes in dummy driver and ynl in order to add the test case. v1: link: https://lore.kernel.org/all/20241023023146.372653-1-shaw.leon@gmail.com/ Xiao Liang (11): rtnetlink: Lookup device in target netns when creating link rtnetlink: Pack newlink() params into struct net: Use link netns in newlink() of rtnl_link_ops ieee802154: 6lowpan: Use link netns in newlink() of rtnl_link_ops net: ip_tunnel: Use link netns in newlink() of rtnl_link_ops net: ipv6: Use link netns in newlink() of rtnl_link_ops net: xfrm: Use link netns in newlink() of rtnl_link_ops rtnetlink: Remove "net" from newlink params rtnetlink: Create link directly in target net namespace selftests: net: Add python context manager for netns entering selftests: net: Add test cases for link and peer netns drivers/infiniband/ulp/ipoib/ipoib_netlink.c | 11 +- drivers/net/amt.c | 16 +- drivers/net/bareudp.c | 11 +- drivers/net/bonding/bond_netlink.c | 8 +- drivers/net/can/dev/netlink.c | 4 +- drivers/net/can/vxcan.c | 9 +- .../ethernet/qualcomm/rmnet/rmnet_config.c | 11 +- drivers/net/geneve.c | 11 +- drivers/net/gtp.c | 9 +- drivers/net/ipvlan/ipvlan.h | 4 +- drivers/net/ipvlan/ipvlan_main.c | 15 +- drivers/net/ipvlan/ipvtap.c | 10 +- drivers/net/macsec.c | 15 +- drivers/net/macvlan.c | 8 +- drivers/net/macvtap.c | 11 +- drivers/net/netkit.c | 9 +- drivers/net/pfcp.c | 11 +- drivers/net/ppp/ppp_generic.c | 10 +- drivers/net/team/team_core.c | 7 +- drivers/net/veth.c | 9 +- drivers/net/vrf.c | 11 +- drivers/net/vxlan/vxlan_core.c | 11 +- drivers/net/wireguard/device.c | 11 +- drivers/net/wireless/virtual/virt_wifi.c | 14 +- drivers/net/wwan/wwan_core.c | 25 +++- include/net/ip_tunnels.h | 5 +- include/net/rtnetlink.h | 44 +++++- net/8021q/vlan_netlink.c | 15 +- net/batman-adv/soft-interface.c | 16 +- net/bridge/br_netlink.c | 12 +- net/caif/chnl_net.c | 6 +- net/core/rtnetlink.c | 35 +++-- net/hsr/hsr_netlink.c | 14 +- net/ieee802154/6lowpan/core.c | 9 +- net/ipv4/ip_gre.c | 27 ++-- net/ipv4/ip_tunnel.c | 10 +- net/ipv4/ip_vti.c | 10 +- net/ipv4/ipip.c | 14 +- net/ipv6/ip6_gre.c | 42 ++++-- net/ipv6/ip6_tunnel.c | 20 ++- net/ipv6/ip6_vti.c | 16 +- net/ipv6/sit.c | 18 ++- net/xfrm/xfrm_interface_core.c | 15 +- tools/testing/selftests/net/Makefile | 1 + tools/testing/selftests/net/config | 5 + .../testing/selftests/net/lib/py/__init__.py | 2 +- tools/testing/selftests/net/lib/py/netns.py | 18 +++ tools/testing/selftests/net/link_netns.py | 141 ++++++++++++++++++ tools/testing/selftests/net/netns-name.sh | 10 ++ 49 files changed, 550 insertions(+), 226 deletions(-) create mode 100755 tools/testing/selftests/net/link_netns.py -- 2.47.1

3 months, 1 week

3
18
0 0

[PATCH 0/3] tun: Unify vnet implementation and fill full vnet header

by Akihiko Odaki

When I implemented virtio's hash-related features to tun/tap [1], I found tun/tap does not fill the entire region reserved for the virtio header, leaving some uninitialized hole in the middle of the buffer after read()/recvmesg(). This series fills the uninitialized hole. More concretely, the num_buffers field will be initialized with 1, and the other fields will be inialized with 0. Setting the num_buffers field to 1 is mandated by virtio 1.0 [2]. The change to virtio header is preceded by another change that refactors tun and tap to unify their virtio-related code. [1]: https://lore.kernel.org/r/20241008-rss-v5-0-f3cf68df005d@daynix.com [2]: https://lore.kernel.org/r/20241227084256-mutt-send-email-mst@kernel.org/ Signed-off-by: Akihiko Odaki <akihiko.odaki(a)daynix.com> --- Akihiko Odaki (3): tun: Unify vnet implementation tun: Pad virtio header with zero tun: Set num_buffers for virtio 1.0 MAINTAINERS | 1 + drivers/net/Kconfig | 5 ++ drivers/net/Makefile | 1 + drivers/net/tap.c | 174 ++++++---------------------------------- drivers/net/tun.c | 212 ++++++++----------------------------------------- drivers/net/tun_vnet.c | 191 ++++++++++++++++++++++++++++++++++++++++++++ drivers/net/tun_vnet.h | 24 ++++++ 7 files changed, 281 insertions(+), 327 deletions(-) --- base-commit: a32e14f8aef69b42826cf0998b068a43d486a9e9 change-id: 20241230-tun-66e10a49b0c7 Best regards, -- Akihiko Odaki <akihiko.odaki(a)daynix.com>

3 months, 1 week

1
3
0 0

[PATCH net-next v2 0/4] netconsole: selftest for userdata overflow

by Breno Leitao

Implement comprehensive testing for netconsole userdata entry handling, demonstrating correct behavior when creating maximum entries and preventing unauthorized overflow. Refactor existing test infrastructure to support modular, reusable helper functions that validate strict entry limit enforcement. Also, add a warning if update_userdata() sees more than MAX_USERDATA_ITEMS entries. This shouldn't happen and it is a bug that shouldn't be silently ignored. Signed-off-by: Breno Leitao <leitao(a)debian.org> --- Changes in v2: - Add the new script (netcons_overflow.sh) in tools/testing/selftests/drivers/net/Makefile as suggested by Simon Horman - Link to v1: https://lore.kernel.org/r/20241204-netcons_overflow_test-v1-0-a85a8d0ace21@… --- Breno Leitao (4): netconsole: Warn if MAX_USERDATA_ITEMS limit is exceeded netconsole: selftest: Split the helpers from the selftest netconsole: selftest: Delete all userdata keys netconsole: selftest: verify userdata entry limit MAINTAINERS | 3 +- drivers/net/netconsole.c | 2 +- tools/testing/selftests/drivers/net/Makefile | 1 + .../selftests/drivers/net/lib/sh/lib_netcons.sh | 225 +++++++++++++++++++++ .../testing/selftests/drivers/net/netcons_basic.sh | 218 +------------------- .../selftests/drivers/net/netcons_overflow.sh | 67 ++++++ 6 files changed, 297 insertions(+), 219 deletions(-) --- base-commit: 94c16fd4df9089931f674fb9aaec41ea20b0fd7a change-id: 20241204-netcons_overflow_test-eaf735d1f743 Best regards, -- Breno Leitao <leitao(a)debian.org>

3 months, 1 week

2
6
0 0

[PATCH v1] selftests/mm: Set allocated memory to non-zero content in cow test

by Ryan Roberts

After commit b1f202060afe ("mm: remap unused subpages to shared zeropage when splitting isolated thp"), cow test cases involving swapping out THPs via madvise(MADV_PAGEOUT) started to be skipped due to the subsequent check via pagemap determining that the memory was not actually swapped out. Logs similar to this were emitted: ... # [RUN] Basic COW after fork() ... with swapped-out, PTE-mapped THP (16 kB) ok 2 # SKIP MADV_PAGEOUT did not work, is swap enabled? # [RUN] Basic COW after fork() ... with single PTE of swapped-out THP (16 kB) ok 3 # SKIP MADV_PAGEOUT did not work, is swap enabled? # [RUN] Basic COW after fork() ... with swapped-out, PTE-mapped THP (32 kB) ok 4 # SKIP MADV_PAGEOUT did not work, is swap enabled? ... The commit in question introduces the behaviour of scanning THPs and if their content is predominantly zero, it splits them and replaces the pages which are wholly zero with the zero page. These cow test cases were getting caught up in this. So let's avoid that by filling the contents of all allocated memory with a non-zero value. With this in place, the tests are passing again. Signed-off-by: Ryan Roberts <ryan.roberts(a)arm.com> --- Applies on top of mm-unstable (f349e79bfbf3) Thanks, Ryan tools/testing/selftests/mm/cow.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/tools/testing/selftests/mm/cow.c b/tools/testing/selftests/mm/cow.c index 32c6ccc2a6be..1238e1c5aae1 100644 --- a/tools/testing/selftests/mm/cow.c +++ b/tools/testing/selftests/mm/cow.c @@ -758,7 +758,7 @@ static void do_run_with_base_page(test_fn fn, bool swapout) } /* Populate a base page. */ - memset(mem, 0, pagesize); + memset(mem, 1, pagesize); if (swapout) { madvise(mem, pagesize, MADV_PAGEOUT); @@ -824,12 +824,12 @@ static void do_run_with_thp(test_fn fn, enum thp_run thp_run, size_t thpsize) * Try to populate a THP. Touch the first sub-page and test if * we get the last sub-page populated automatically. */ - mem[0] = 0; + mem[0] = 1; if (!pagemap_is_populated(pagemap_fd, mem + thpsize - pagesize)) { ksft_test_result_skip("Did not get a THP populated\n"); goto munmap; } - memset(mem, 0, thpsize); + memset(mem, 1, thpsize); size = thpsize; switch (thp_run) { @@ -1012,7 +1012,7 @@ static void run_with_hugetlb(test_fn fn, const char *desc, size_t hugetlbsize) } /* Populate an huge page. */ - memset(mem, 0, hugetlbsize); + memset(mem, 1, hugetlbsize); /* * We need a total of two hugetlb pages to handle COW/unsharing -- 2.43.0

3 months, 1 week

3
3
0 0

Re: [PATCH 3/3] selftests/mm: virtual_address_range: Dump to /dev/null

by Thomas Weißschuh

On Wed, Jan 08, 2025 at 11:39:40AM +0530, Dev Jain wrote: > > On 07/01/25 8:44 pm, Thomas Weißschuh wrote: > > During the execution of validate_complete_va_space() a lot of memory is > > on the VM subsystem. When running on a low memory subsystem an OOM may > > be triggered, when writing to the dump file as the filesystem may also > > require memory. > > > > On my test system with 1100MiB physical memory: > > > > Tasks state (memory values in pages): > > [ pid ] uid tgid total_vm rss rss_anon rss_file rss_shmem pgtables_bytes swapents oom_score_adj name > > [ 57] 0 57 34359215953 695 256 0 439 1064390656 0 0 virtual_address > > > > Out of memory: Killed process 57 (virtual_address) total-vm:137436863812kB, anon-rss:1024kB, file-rss:0kB, shmem-rss:1756kB, UID:0 pgtables:1039444kB oom_score_adj:0 > > <snip> > > fault_in_iov_iter_readable+0x4a/0xd0 > > generic_perform_write+0x9c/0x280 > > shmem_file_write_iter+0x86/0x90 > > vfs_write+0x29c/0x480 > > ksys_write+0x6c/0xe0 > > do_syscall_64+0x9e/0x1a0 > > entry_SYSCALL_64_after_hwframe+0x77/0x7f > > > > Write the dumped data into /dev/null instead which does not require > > additional memory during write(), making the code simpler as a > > side-effect. > > > > Signed-off-by: Thomas Weißschuh<thomas.weissschuh(a)linutronix.de> > > --- > > tools/testing/selftests/mm/virtual_address_range.c | 6 ++---- > > 1 file changed, 2 insertions(+), 4 deletions(-) > > > > diff --git a/tools/testing/selftests/mm/virtual_address_range.c b/tools/testing/selftests/mm/virtual_address_range.c > > index 484f82c7b7c871f82a7d9ec6d6c649f2ab1eb0cd..4042fd878acd702d23da2c3293292de33bd48143 100644 > > --- a/tools/testing/selftests/mm/virtual_address_range.c > > +++ b/tools/testing/selftests/mm/virtual_address_range.c > > @@ -103,10 +103,9 @@ static int validate_complete_va_space(void) > > FILE *file; > > int fd; > > - fd = open("va_dump", O_CREAT | O_WRONLY, 0600); > > - unlink("va_dump"); > > + fd = open("/dev/null", O_WRONLY); > > if (fd < 0) { > > - ksft_test_result_skip("cannot create or open dump file\n"); > > + ksft_test_result_skip("cannot create or open /dev/null\n"); > > ksft_finished(); > > } > > @@ -152,7 +151,6 @@ static int validate_complete_va_space(void) > > while (start_addr + hop < end_addr) { > > if (write(fd, (void *)(start_addr + hop), 1) != 1) > > return 1; > > - lseek(fd, 0, SEEK_SET); > > hop += MAP_CHUNK_SIZE; > > } > > > > The reason I had not used /dev/null was that write() was succeeding to /dev/null > even from an address not in my VA space. I was puzzled about this behaviour of > /dev/null and I chose to ignore it and just use a real file. That makes sense and I can reproduce your example. Switching to another dummy file which reads the written data like /dev/random also leads to OOM, so wouldn't help either. Thanks for the explanation. @Andrew, could you drop this patch? > To test this behaviour, run the following program: [..] PS: Your mail contained HTML and did not make it to the list archives. (And the text variant of the example program was corrupted)

3 months, 1 week

1
0
0 0

[PATCH v7 00/30] NT synchronization primitive driver

by Elizabeth Figura

This patch series implements a new char misc driver, /dev/ntsync, which is used to implement Windows NT synchronization primitives. NT synchronization primitives are unique in that the wait functions both are vectored, operate on multiple types of object with different behaviour (mutex, semaphore, event), and affect the state of the objects they wait on. This model is not compatible with existing kernel synchronization objects or interfaces, and therefore the ntsync driver implements its own wait queues and locking. This patch series is rebased against the "char-misc-next" branch of gregkh/char-misc.git. == Background == The Wine project emulates the Windows API in user space. One particular part of that API, namely the NT synchronization primitives, have historically been implemented via RPC to a dedicated "kernel" process. However, more recent applications use these APIs more strenuously, and the overhead of RPC has become a bottleneck. The NT synchronization APIs are too complex to implement on top of existing primitives without sacrificing correctness. Certain operations, such as NtPulseEvent() or the "wait-for-all" mode of NtWaitForMultipleObjects(), require direct control over the underlying wait queue, and implementing a wait queue sufficiently robust for Wine in user space is not possible. This proposed driver, therefore, implements the problematic interfaces directly in the Linux kernel. This driver was presented at Linux Plumbers Conference 2023. For those further interested in the history of synchronization in Wine and past attempts to solve this problem in user space, a recording of the presentation can be viewed here: https://www.youtube.com/watch?v=NjU4nyWyhU8 == Performance == The performance measurements described below are copied from earlier versions of the patch set. While some of the code has changed, I do not currently anticipate that it has changed drastically enough to affect those measurements. The gain in performance varies wildly depending on the application in question and the user's hardware. For some games NT synchronization is not a bottleneck and no change can be observed, but for others frame rate improvements of 50 to 150 percent are not atypical. The following table lists frame rate measurements from a variety of games on a variety of hardware, taken by users Dmitry Skvortsov, FuzzyQuils, OnMars, and myself: Game Upstream ntsync improvement =========================================================================== Anger Foot 69 99 43% Call of Juarez 99.8 224.1 125% Dirt 3 110.6 860.7 678% Forza Horizon 5 108 160 48% Lara Croft: Temple of Osiris 141 326 131% Metro 2033 164.4 199.2 21% Resident Evil 2 26 77 196% The Crew 26 51 96% Tiny Tina's Wonderlands 130 360 177% Total War Saga: Troy 109 146 34% =========================================================================== == Patches == The intended semantics of the patches are broadly intended to match those of the corresponding Windows functions. For those not already familiar with the Windows functions (or their undocumented behaviour), patch 27/28 provides a detailed specification, and individual patches also include a brief description of the API they are implementing. The patches making use of this driver in Wine can be retrieved or browsed here: https://repo.or.cz/wine/zf.git/shortlog/refs/heads/ntsync7 == Previous versions == Changes from v6: * rename NTSYNC_IOC_SEM_POST to NTSYNC_IOC_SEM_RELEASE (matching the NT terminology instead of POSIX), * change object creation ioctls to return the fds directly in the return value instead of through the args struct, which simplifies the API a bit. * Link to v6: https://lore.kernel.org/lkml/20241209185904.507350-1-zfigura@codeweavers.co… * Link to v5: https://lore.kernel.org/lkml/20240519202454.1192826-1-zfigura@codeweavers.c… * Link to v4: https://lore.kernel.org/lkml/20240416010837.333694-1-zfigura@codeweavers.co… * Link to v3: https://lore.kernel.org/lkml/20240329000621.148791-1-zfigura@codeweavers.co… * Link to v2: https://lore.kernel.org/lkml/20240219223833.95710-1-zfigura@codeweavers.com/ * Link to v1: https://lore.kernel.org/lkml/20240214233645.9273-1-zfigura@codeweavers.com/ * Link to RFC v2: https://lore.kernel.org/lkml/20240131021356.10322-1-zfigura@codeweavers.com/ * Link to RFC v1: https://lore.kernel.org/lkml/20240124004028.16826-1-zfigura@codeweavers.com/ Elizabeth Figura (30): ntsync: Return the fd from NTSYNC_IOC_CREATE_SEM. ntsync: Rename NTSYNC_IOC_SEM_POST to NTSYNC_IOC_SEM_RELEASE. ntsync: Introduce NTSYNC_IOC_WAIT_ANY. ntsync: Introduce NTSYNC_IOC_WAIT_ALL. ntsync: Introduce NTSYNC_IOC_CREATE_MUTEX. ntsync: Introduce NTSYNC_IOC_MUTEX_UNLOCK. ntsync: Introduce NTSYNC_IOC_MUTEX_KILL. ntsync: Introduce NTSYNC_IOC_CREATE_EVENT. ntsync: Introduce NTSYNC_IOC_EVENT_SET. ntsync: Introduce NTSYNC_IOC_EVENT_RESET. ntsync: Introduce NTSYNC_IOC_EVENT_PULSE. ntsync: Introduce NTSYNC_IOC_SEM_READ. ntsync: Introduce NTSYNC_IOC_MUTEX_READ. ntsync: Introduce NTSYNC_IOC_EVENT_READ. ntsync: Introduce alertable waits. selftests: ntsync: Add some tests for semaphore state. selftests: ntsync: Add some tests for mutex state. selftests: ntsync: Add some tests for NTSYNC_IOC_WAIT_ANY. selftests: ntsync: Add some tests for NTSYNC_IOC_WAIT_ALL. selftests: ntsync: Add some tests for wakeup signaling with WINESYNC_IOC_WAIT_ANY. selftests: ntsync: Add some tests for wakeup signaling with WINESYNC_IOC_WAIT_ALL. selftests: ntsync: Add some tests for manual-reset event state. selftests: ntsync: Add some tests for auto-reset event state. selftests: ntsync: Add some tests for wakeup signaling with events. selftests: ntsync: Add tests for alertable waits. selftests: ntsync: Add some tests for wakeup signaling via alerts. selftests: ntsync: Add a stress test for contended waits. maintainers: Add an entry for ntsync. docs: ntsync: Add documentation for the ntsync uAPI. ntsync: No longer depend on BROKEN. Documentation/userspace-api/index.rst | 1 + Documentation/userspace-api/ntsync.rst | 385 +++++ MAINTAINERS | 9 + drivers/misc/Kconfig | 1 - drivers/misc/ntsync.c | 992 +++++++++++- include/uapi/linux/ntsync.h | 42 +- tools/testing/selftests/Makefile | 1 + .../selftests/drivers/ntsync/.gitignore | 1 + .../testing/selftests/drivers/ntsync/Makefile | 7 + tools/testing/selftests/drivers/ntsync/config | 1 + .../testing/selftests/drivers/ntsync/ntsync.c | 1343 +++++++++++++++++ 11 files changed, 2767 insertions(+), 16 deletions(-) create mode 100644 Documentation/userspace-api/ntsync.rst create mode 100644 tools/testing/selftests/drivers/ntsync/.gitignore create mode 100644 tools/testing/selftests/drivers/ntsync/Makefile create mode 100644 tools/testing/selftests/drivers/ntsync/config create mode 100644 tools/testing/selftests/drivers/ntsync/ntsync.c base-commit: cdd30ebb1b9f36159d66f088b61aee264e649d7a -- 2.45.2

3 months, 1 week

3
33
0 0

[PATCH 0/3] selftests: bpf: Migrate test_xdp_redirect.sh to test_progs

by Bastien Curutchet (eBPF Foundation)

Hi all, This patch series continues the work to migrate the *.sh tests into prog_tests. test_xdp_redirect.sh tests the XDP redirections done through bpf_redirect(). These XDP redirections are already tested by prog_tests/xdp_do_redirect.c but IMO it doesn't cover the exact same code path because xdp_do_redirect.c uses bpf_prog_test_run_opts() to trigger redirections of 'fake packets' while test_xdp_redirect.sh redirects packets coming from the network. Also, the test_xdp_redirect.sh script tests the redirections with both SKB and DRV modes while xdp_do_redirect.c only tests the DRV mode. The patch series adds two new test cases in prog_tests/xdp_do_redirect.c to replace the test_xdp_redirect.sh script. Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet(a)bootlin.com> --- Bastien Curutchet (eBPF Foundation) (3): selftests/bpf: test_xdp_redirect: Rename BPF sections selftests/bpf: Migrate test_xdp_redirect.sh to xdp_do_redirect.c selftests/bpf: Migrate test_xdp_redirect.c to test_xdp_do_redirect.c tools/testing/selftests/bpf/Makefile | 1 - .../selftests/bpf/prog_tests/xdp_do_redirect.c | 192 +++++++++++++++++++++ .../selftests/bpf/progs/test_xdp_do_redirect.c | 12 ++ .../selftests/bpf/progs/test_xdp_redirect.c | 26 --- tools/testing/selftests/bpf/test_xdp_redirect.sh | 79 --------- 5 files changed, 204 insertions(+), 106 deletions(-) --- base-commit: da86bde1e6d1b887efc46af5ee1f9bbccd27233e change-id: 20241219-xdp_redirect-2b8ec79dc24e Best regards, -- Bastien Curutchet (eBPF Foundation) <bastien.curutchet(a)bootlin.com>

3 months, 1 week

4
10
0 0

[PATCH v4 0/9] arm64: Support 2024 dpISA extensions

by Mark Brown

The 2024 architecture release includes a number of data processing extensions, mostly SVE and SME additions with a few others. These are all very straightforward extensions which add instructions but no architectural state so only need hwcaps and exposing of the ID registers to KVM guests and userspace. Signed-off-by: Mark Brown <broonie(a)kernel.org> --- Changes in v4: - Fix encodings for ID_AA64ISAR3_EL1. - Link to v3: https://lore.kernel.org/r/20241203-arm64-2024-dpisa-v3-0-a6c78b1aa297@kerne… Changes in v3: - Commit log update for the hwcap test. - Link to v2: https://lore.kernel.org/r/20241030-arm64-2024-dpisa-v2-0-b6601a15d2a5@kerne… Changes in v2: - Filter KVM guest visible bitfields in ID_AA64ISAR3_EL1 to only those we make writeable. - Link to v1: https://lore.kernel.org/r/20241028-arm64-2024-dpisa-v1-0-a38d08b008a8@kerne… --- Mark Brown (9): arm64/sysreg: Update ID_AA64PFR2_EL1 to DDI0601 2024-09 arm64/sysreg: Update ID_AA64ISAR3_EL1 to DDI0601 2024-09 arm64/sysreg: Update ID_AA64FPFR0_EL1 to DDI0601 2024-09 arm64/sysreg: Update ID_AA64ZFR0_EL1 to DDI0601 2024-09 arm64/sysreg: Update ID_AA64SMFR0_EL1 to DDI0601 2024-09 arm64/sysreg: Update ID_AA64ISAR2_EL1 to DDI0601 2024-09 arm64/hwcap: Describe 2024 dpISA extensions to userspace KVM: arm64: Allow control of dpISA extensions in ID_AA64ISAR3_EL1 kselftest/arm64: Add 2024 dpISA extensions to hwcap test Documentation/arch/arm64/elf_hwcaps.rst | 51 ++++++ arch/arm64/include/asm/hwcap.h | 17 ++ arch/arm64/include/uapi/asm/hwcap.h | 17 ++ arch/arm64/kernel/cpufeature.c | 35 ++++ arch/arm64/kernel/cpuinfo.c | 17 ++ arch/arm64/kvm/sys_regs.c | 6 +- arch/arm64/tools/sysreg | 87 +++++++++- tools/testing/selftests/arm64/abi/hwcap.c | 273 +++++++++++++++++++++++++++++- 8 files changed, 493 insertions(+), 10 deletions(-) --- base-commit: 40384c840ea1944d7c5a392e8975ed088ecf0b37 change-id: 20241008-arm64-2024-dpisa-8091074a7f48 Best regards, -- Mark Brown <broonie(a)kernel.org>

3 months, 1 week

3
15
0 0

[PATCH 00/14] pkeys kselftests improvements

by Kevin Brodsky

This series brings various cleanups and fixes for the mm (mostly pkeys) kselftests. The original goal was to make the pkeys tests work out of the box and without build warning - it turned out to be more involved than expected. The most important change is enabling -O2 when building all mm kselftests (patch 5). This is actually needed for the pkeys tests to run successfully (see gcc command line at the top of protection_keys.c and pkey_sighandler_tests.c), and seems to have no negative impact on the other tests. It certainly can't hurt performance! The following patches address a few obvious issues in the pkeys tests (unused code, bad scope for functions/variables, etc.) and finally make a couple of small improvements. There is one ugliness that this series does not fix: some functions in pkey-<arch>.h call functions that are actually defined in protection_keys.c. For instance, expect_fault_on_read_execonly_key() in pkey-x86.h calls expected_pkey_fault(). This means that other test programs that use pkey-helpers.h (namely pkey_sighandler_tests) would fail to link if they called such functions defined in pkey-<arch>.h. Fixing this would require a more comprehensive reorganisation of the pkey-* headers, which doesn't seem worth it (patch 9 adds a comment to pkey-helpers.h to clarify the situation). Some more details on the patches: - Patch 1 is an unrelated fix that was revealed by inspecting a warning. It seems fairly harmless though, so I thought I'd just post it as part of this series. - Patch 2-5 fix various warnings that come up by building the mm tests at -O2 and finally enable -O2. - Patch 6-12 are various cleanups for the pkeys tests. Patch 11 in particular enables is_pkeys_supported() to be called from outside protection_keys.c (patch 13 relies on this). - Patch 13-14 are small improvements to pkey_sighandler_tests.c. Many thanks to Ryan Roberts for checking that the mm tests still run fine on arm64 with those patches applied. I've also checked that the pkeys tests run fine on arm64 and x86. - Kevin --- Cc: akpm(a)linux-foundation.org Cc: aruna.ramakrishna(a)oracle.com Cc: catalin.marinas(a)arm.com Cc: dave.hansen(a)linux.intel.com Cc: joey.gouly(a)arm.com Cc: keith.lucas(a)oracle.com Cc: ryan.roberts(a)arm.com Cc: shuah(a)kernel.org Cc: linux-arm-kernel(a)lists.infradead.org Cc: linux-kselftest(a)vger.kernel.org Cc: x86(a)kernel.org --- Kevin Brodsky (14): selftests/mm: Fix condition in uffd_move_test_common() selftests/mm: Fix -Wmaybe-uninitialized warnings selftests/mm: Fix strncpy() length selftests/mm: Fix -Warray-bounds warnings in pkey_sighandler_tests selftests/mm: Build with -O2 selftests/mm: Remove unused pkey helpers selftests/mm: Define types using typedef in pkey-helpers.h selftests/mm: Ensure pkey-*.h define inline functions only selftests/mm: Remove empty pkey helper definition selftests/mm: Ensure non-global pkey symbols are marked static selftests/mm: Use sys_pkey helpers consistently selftests/mm: Rename pkey register macro selftests/mm: Skip pkey_sighandler_tests if support is missing selftests/mm: Remove X permission from sigaltstack mapping tools/testing/selftests/mm/Makefile | 6 +- tools/testing/selftests/mm/ksm_tests.c | 2 +- tools/testing/selftests/mm/mremap_test.c | 2 +- tools/testing/selftests/mm/pkey-arm64.h | 6 +- tools/testing/selftests/mm/pkey-helpers.h | 61 ++--- tools/testing/selftests/mm/pkey-powerpc.h | 4 +- tools/testing/selftests/mm/pkey-x86.h | 6 +- .../selftests/mm/pkey_sighandler_tests.c | 32 +-- tools/testing/selftests/mm/pkey_util.c | 40 ++++ tools/testing/selftests/mm/protection_keys.c | 212 +++++++----------- tools/testing/selftests/mm/soft-dirty.c | 2 +- tools/testing/selftests/mm/uffd-unit-tests.c | 4 +- .../testing/selftests/mm/write_to_hugetlbfs.c | 2 +- 13 files changed, 163 insertions(+), 216 deletions(-) create mode 100644 tools/testing/selftests/mm/pkey_util.c -- 2.47.0

3 months, 1 week

2
18
0 0

[PATCH v1] selftests/mm: static process_madvise() wrapper for guard-pages

by Ryan Roberts

The recently introduced guard-pages mm selftest uses the process_madvise() syscall, a wrapper for which was added to glibc v2.36. For those of us stuck with older distributions this causes a compile error when compiling the mm selftests. For example Ubuntu 22.04 uses glibc 2.35, which does not have the wrapper. To workaround the issue, let's introduce our own static process_madvise() wrapper that uses glibc's syscall() helper. While we are at it, add the guard-page test suite to run_vmtests.sh so that it can be automatically run by CI systems. Signed-off-by: Ryan Roberts <ryan.roberts(a)arm.com> --- Applies on top of mm-unstable (f349e79bfbf3) Thanks, Ryan tools/testing/selftests/mm/guard-pages.c | 10 ++++++++-- tools/testing/selftests/mm/run_vmtests.sh | 5 +++++ 2 files changed, 13 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/mm/guard-pages.c b/tools/testing/selftests/mm/guard-pages.c index d8f8dee9ebbd..ece37212a8a2 100644 --- a/tools/testing/selftests/mm/guard-pages.c +++ b/tools/testing/selftests/mm/guard-pages.c @@ -55,6 +55,12 @@ static int pidfd_open(pid_t pid, unsigned int flags) return syscall(SYS_pidfd_open, pid, flags); } +static ssize_t sys_process_madvise(int pidfd, const struct iovec *iovec, + size_t n, int advice, unsigned int flags) +{ + return syscall(__NR_process_madvise, pidfd, iovec, n, advice, flags); +} + /* * Enable our signal catcher and try to read/write the specified buffer. The * return value indicates whether the read/write succeeds without a fatal @@ -419,7 +425,7 @@ TEST_F(guard_pages, process_madvise) ASSERT_EQ(munmap(&ptr_region[99 * page_size], page_size), 0); /* Now guard in one step. */ - count = process_madvise(pidfd, vec, 6, MADV_GUARD_INSTALL, 0); + count = sys_process_madvise(pidfd, vec, 6, MADV_GUARD_INSTALL, 0); /* OK we don't have permission to do this, skip. */ if (count == -1 && errno == EPERM) @@ -440,7 +446,7 @@ TEST_F(guard_pages, process_madvise) ASSERT_FALSE(try_read_write_buf(&ptr3[19 * page_size])); /* Now do the same with unguard... */ - count = process_madvise(pidfd, vec, 6, MADV_GUARD_REMOVE, 0); + count = sys_process_madvise(pidfd, vec, 6, MADV_GUARD_REMOVE, 0); /* ...and everything should now succeed. */ diff --git a/tools/testing/selftests/mm/run_vmtests.sh b/tools/testing/selftests/mm/run_vmtests.sh index 2fc290d9430c..00c3f07ea100 100755 --- a/tools/testing/selftests/mm/run_vmtests.sh +++ b/tools/testing/selftests/mm/run_vmtests.sh @@ -45,6 +45,8 @@ separated by spaces: vmalloc smoke tests - hmm hmm smoke tests +- madv_guard + test madvise(2) MADV_GUARD_INSTALL and MADV_GUARD_REMOVE options - madv_populate test memadvise(2) MADV_POPULATE_{READ,WRITE} options - memfd_secret @@ -375,6 +377,9 @@ CATEGORY="mremap" run_test ./mremap_dontunmap CATEGORY="hmm" run_test bash ./test_hmm.sh smoke +# MADV_GUARD_INSTALL and MADV_GUARD_REMOVE tests +CATEGORY="madv_guard" run_test ./guard-pages + # MADV_POPULATE_READ and MADV_POPULATE_WRITE tests CATEGORY="madv_populate" run_test ./madv_populate -- 2.43.0

3 months, 1 week

2
2
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror January 2025