October 2025 - Linux-kselftest-mirror

[PATCH net repost] selftests: net: check jq command is supported

by Wang Liang

The jq command is used in vlan_bridge_binding.sh, if it is not supported, the test will spam the following log. # ./vlan_bridge_binding.sh: line 51: jq: command not found # ./vlan_bridge_binding.sh: line 51: jq: command not found # ./vlan_bridge_binding.sh: line 51: jq: command not found # ./vlan_bridge_binding.sh: line 51: jq: command not found # ./vlan_bridge_binding.sh: line 51: jq: command not found # TEST: Test bridge_binding on->off when lower down [FAIL] # Got operstate of , expected 0 The rtnetlink.sh has the same problem. It makes sense to check if jq is installed before running these tests. After this patch, the vlan_bridge_binding.sh skipped if jq is not supported: # timeout set to 3600 # selftests: net: vlan_bridge_binding.sh # TEST: jq not installed [SKIP] Fixes: dca12e9ab760 ("selftests: net: Add a VLAN bridge binding selftest") Fixes: 6a414fd77f61 ("selftests: rtnetlink: Add an address proto test") Signed-off-by: Wang Liang <wangliang74(a)huawei.com> Reviewed-by: Hangbin Liu <liuhangbin(a)gmail.com> --- tools/testing/selftests/net/rtnetlink.sh | 2 ++ tools/testing/selftests/net/vlan_bridge_binding.sh | 2 ++ 2 files changed, 4 insertions(+) diff --git a/tools/testing/selftests/net/rtnetlink.sh b/tools/testing/selftests/net/rtnetlink.sh index dbf77513f617..163a084d525d 100755 --- a/tools/testing/selftests/net/rtnetlink.sh +++ b/tools/testing/selftests/net/rtnetlink.sh @@ -1466,6 +1466,8 @@ usage: ${0##*/} OPTS EOF } +require_command jq + #check for needed privileges if [ "$(id -u)" -ne 0 ];then end_test "SKIP: Need root privileges" diff --git a/tools/testing/selftests/net/vlan_bridge_binding.sh b/tools/testing/selftests/net/vlan_bridge_binding.sh index db481af9b6b3..e8c02c64e03a 100755 --- a/tools/testing/selftests/net/vlan_bridge_binding.sh +++ b/tools/testing/selftests/net/vlan_bridge_binding.sh @@ -249,6 +249,8 @@ test_binding_toggle_off_when_upper_down() do_test_binding_off : "on->off when upper down" } +require_command jq + trap defer_scopes_cleanup EXIT setup_prepare tests_run -- 2.34.1

2 months, 2 weeks

2
1
0 0

[PATCH net-next v5 1/2] net/tls: support setting the maximum payload size

by Wilfred Mallawa

From: Wilfred Mallawa <wilfred.mallawa(a)wdc.com> During a handshake, an endpoint may specify a maximum record size limit. Currently, the kernel defaults to TLS_MAX_PAYLOAD_SIZE (16KB) for the maximum record size. Meaning that, the outgoing records from the kernel can exceed a lower size negotiated during the handshake. In such a case, the TLS endpoint must send a fatal "record_overflow" alert [1], and thus the record is discarded. Upcoming Western Digital NVMe-TCP hardware controllers implement TLS support. For these devices, supporting TLS record size negotiation is necessary because the maximum TLS record size supported by the controller is less than the default 16KB currently used by the kernel. Currently, there is no way to inform the kernel of such a limit. This patch adds support to a new setsockopt() option `TLS_TX_MAX_PAYLOAD_LEN` that allows for setting the maximum plaintext fragment size. Once set, outgoing records are no larger than the size specified. This option can be used to specify the record size limit. [1] https://www.rfc-editor.org/rfc/rfc8449 Signed-off-by: Wilfred Mallawa <wilfred.mallawa(a)wdc.com> --- Changes V4 -> V5 - Change the socket option to TLS_TX_MAX_PAYLOAD_LEN, such that we can limit the payload length in a generic way, as pposed to strictly specifying record size limit. No functional changes other than removing TLS 1.3 content byte length checks for this argument. - Lock the socket when calling do_tls_setsockopt_tx_payload_len() V4: https://lore.kernel.org/netdev/20250923053207.113938-1-wilfred.opensource@g… --- Documentation/networking/tls.rst | 11 ++++++ include/net/tls.h | 3 ++ include/uapi/linux/tls.h | 2 ++ net/tls/tls_device.c | 2 +- net/tls/tls_main.c | 62 ++++++++++++++++++++++++++++++++ net/tls/tls_sw.c | 2 +- 6 files changed, 80 insertions(+), 2 deletions(-) diff --git a/Documentation/networking/tls.rst b/Documentation/networking/tls.rst index 36cc7afc2527..dabab17ab84a 100644 --- a/Documentation/networking/tls.rst +++ b/Documentation/networking/tls.rst @@ -280,6 +280,17 @@ If the record decrypted turns out to had been padded or is not a data record it will be decrypted again into a kernel buffer without zero copy. Such events are counted in the ``TlsDecryptRetry`` statistic. +TLS_TX_MAX_PAYLOAD_LEN +~~~~~~~~~~~~~~~~~~~~~~ + +Sets the maximum size for the plaintext of a protected record. + +When this option is set, the kernel enforces this limit on all transmitted TLS +records, ensuring no plaintext fragment exceeds the specified size. This can be +used to specify the TLS Record Size Limit [1]. + +[1] https://datatracker.ietf.org/doc/html/rfc8449 + Statistics ========== diff --git a/include/net/tls.h b/include/net/tls.h index 857340338b69..f2af113728aa 100644 --- a/include/net/tls.h +++ b/include/net/tls.h @@ -53,6 +53,8 @@ struct tls_rec; /* Maximum data size carried in a TLS record */ #define TLS_MAX_PAYLOAD_SIZE ((size_t)1 << 14) +/* Minimum record size limit as per RFC8449 */ +#define TLS_MIN_RECORD_SIZE_LIM ((size_t)1 << 6) #define TLS_HEADER_SIZE 5 #define TLS_NONCE_OFFSET TLS_HEADER_SIZE @@ -226,6 +228,7 @@ struct tls_context { u8 rx_conf:3; u8 zerocopy_sendfile:1; u8 rx_no_pad:1; + u16 tx_max_payload_len; int (*push_pending_record)(struct sock *sk, int flags); void (*sk_write_space)(struct sock *sk); diff --git a/include/uapi/linux/tls.h b/include/uapi/linux/tls.h index b66a800389cc..b8b9c42f848c 100644 --- a/include/uapi/linux/tls.h +++ b/include/uapi/linux/tls.h @@ -41,6 +41,7 @@ #define TLS_RX 2 /* Set receive parameters */ #define TLS_TX_ZEROCOPY_RO 3 /* TX zerocopy (only sendfile now) */ #define TLS_RX_EXPECT_NO_PAD 4 /* Attempt opportunistic zero-copy */ +#define TLS_TX_MAX_PAYLOAD_LEN 5 /* Maximum plaintext size */ /* Supported versions */ #define TLS_VERSION_MINOR(ver) ((ver) & 0xFF) @@ -194,6 +195,7 @@ enum { TLS_INFO_RXCONF, TLS_INFO_ZC_RO_TX, TLS_INFO_RX_NO_PAD, + TLS_INFO_TX_MAX_PAYLOAD_LEN, __TLS_INFO_MAX, }; #define TLS_INFO_MAX (__TLS_INFO_MAX - 1) diff --git a/net/tls/tls_device.c b/net/tls/tls_device.c index a64ae15b1a60..c6289c73cffc 100644 --- a/net/tls/tls_device.c +++ b/net/tls/tls_device.c @@ -461,7 +461,7 @@ static int tls_push_data(struct sock *sk, /* TLS_HEADER_SIZE is not counted as part of the TLS record, and * we need to leave room for an authentication tag. */ - max_open_record_len = TLS_MAX_PAYLOAD_SIZE + + max_open_record_len = tls_ctx->tx_max_payload_len + prot->prepend_size; do { rc = tls_do_allocation(sk, ctx, pfrag, prot->prepend_size); diff --git a/net/tls/tls_main.c b/net/tls/tls_main.c index a3ccb3135e51..b481d1add14e 100644 --- a/net/tls/tls_main.c +++ b/net/tls/tls_main.c @@ -544,6 +544,28 @@ static int do_tls_getsockopt_no_pad(struct sock *sk, char __user *optval, return 0; } +static int do_tls_getsockopt_tx_payload_len(struct sock *sk, char __user *optval, + int __user *optlen) +{ + struct tls_context *ctx = tls_get_ctx(sk); + u16 payload_len = ctx->tx_max_payload_len; + int len; + + if (get_user(len, optlen)) + return -EFAULT; + + if (len < sizeof(payload_len)) + return -EINVAL; + + if (put_user(sizeof(payload_len), optlen)) + return -EFAULT; + + if (copy_to_user(optval, &payload_len, sizeof(payload_len))) + return -EFAULT; + + return 0; +} + static int do_tls_getsockopt(struct sock *sk, int optname, char __user *optval, int __user *optlen) { @@ -563,6 +585,9 @@ static int do_tls_getsockopt(struct sock *sk, int optname, case TLS_RX_EXPECT_NO_PAD: rc = do_tls_getsockopt_no_pad(sk, optval, optlen); break; + case TLS_TX_MAX_PAYLOAD_LEN: + rc = do_tls_getsockopt_tx_payload_len(sk, optval, optlen); + break; default: rc = -ENOPROTOOPT; break; @@ -812,6 +837,30 @@ static int do_tls_setsockopt_no_pad(struct sock *sk, sockptr_t optval, return rc; } +static int do_tls_setsockopt_tx_payload_len(struct sock *sk, sockptr_t optval, + unsigned int optlen) +{ + struct tls_context *ctx = tls_get_ctx(sk); + struct tls_sw_context_tx *sw_ctx = tls_sw_ctx_tx(ctx); + u16 value; + + if (sw_ctx->open_rec) + return -EBUSY; + + if (sockptr_is_null(optval) || optlen != sizeof(value)) + return -EINVAL; + + if (copy_from_sockptr(&value, optval, sizeof(value))) + return -EFAULT; + + if (value < TLS_MIN_RECORD_SIZE_LIM || value > TLS_MAX_PAYLOAD_SIZE) + return -EINVAL; + + ctx->tx_max_payload_len = value; + + return 0; +} + static int do_tls_setsockopt(struct sock *sk, int optname, sockptr_t optval, unsigned int optlen) { @@ -833,6 +882,11 @@ static int do_tls_setsockopt(struct sock *sk, int optname, sockptr_t optval, case TLS_RX_EXPECT_NO_PAD: rc = do_tls_setsockopt_no_pad(sk, optval, optlen); break; + case TLS_TX_MAX_PAYLOAD_LEN: + lock_sock(sk); + rc = do_tls_setsockopt_tx_payload_len(sk, optval, optlen); + release_sock(sk); + break; default: rc = -ENOPROTOOPT; break; @@ -1022,6 +1076,7 @@ static int tls_init(struct sock *sk) ctx->tx_conf = TLS_BASE; ctx->rx_conf = TLS_BASE; + ctx->tx_max_payload_len = TLS_MAX_PAYLOAD_SIZE; update_sk_prot(sk, ctx); out: write_unlock_bh(&sk->sk_callback_lock); @@ -1111,6 +1166,12 @@ static int tls_get_info(struct sock *sk, struct sk_buff *skb, bool net_admin) goto nla_failure; } + err = nla_put_u16(skb, TLS_INFO_TX_MAX_PAYLOAD_LEN, + ctx->tx_max_payload_len); + + if (err) + goto nla_failure; + rcu_read_unlock(); nla_nest_end(skb, start); return 0; @@ -1132,6 +1193,7 @@ static size_t tls_get_info_size(const struct sock *sk, bool net_admin) nla_total_size(sizeof(u16)) + /* TLS_INFO_TXCONF */ nla_total_size(0) + /* TLS_INFO_ZC_RO_TX */ nla_total_size(0) + /* TLS_INFO_RX_NO_PAD */ + nla_total_size(sizeof(u16)) + /* TLS_INFO_TX_MAX_PAYLOAD_LEN */ 0; return size; diff --git a/net/tls/tls_sw.c b/net/tls/tls_sw.c index daac9fd4be7e..e76ea38b712a 100644 --- a/net/tls/tls_sw.c +++ b/net/tls/tls_sw.c @@ -1079,7 +1079,7 @@ static int tls_sw_sendmsg_locked(struct sock *sk, struct msghdr *msg, orig_size = msg_pl->sg.size; full_record = false; try_to_copy = msg_data_left(msg); - record_room = TLS_MAX_PAYLOAD_SIZE - msg_pl->sg.size; + record_room = tls_ctx->tx_max_payload_len - msg_pl->sg.size; if (try_to_copy >= record_room) { try_to_copy = record_room; full_record = true; -- 2.51.0

2 months, 2 weeks

3
3
0 0

[PATCH v2] vdso: Remove struct getcpu_cache

by Thomas Weißschuh

The cache parameter of getcpu() is not used by the kernel and no user ever passes it in anyways. Remove the struct and its header. As a side-effect we get rid of an unwanted inclusion of the linux/ header namespace from vDSO code. Signed-off-by: Thomas Weißschuh <thomas.weissschuh(a)linutronix.de> --- Changes in v2: - Rebase on v6.18-rc1 - Link to v1: https://lore.kernel.org/r/20250826-getcpu_cache-v1-1-8748318f6141@linutroni… --- We could also completely remove the parameter, but I am not sure if that is a good idea for syscalls and vDSO entrypoints. --- arch/loongarch/vdso/vgetcpu.c | 5 ++--- arch/s390/kernel/vdso64/getcpu.c | 3 +-- arch/s390/kernel/vdso64/vdso.h | 4 +--- arch/x86/entry/vdso/vgetcpu.c | 5 ++--- arch/x86/include/asm/vdso/processor.h | 4 +--- arch/x86/um/vdso/um_vdso.c | 7 +++---- include/linux/getcpu.h | 19 ------------------- include/linux/syscalls.h | 3 +-- kernel/sys.c | 4 +--- tools/testing/selftests/vDSO/vdso_test_getcpu.c | 4 +--- 10 files changed, 13 insertions(+), 45 deletions(-) diff --git a/arch/loongarch/vdso/vgetcpu.c b/arch/loongarch/vdso/vgetcpu.c index 5301cd9d0f839eb0fd7b73a1d36e80aaa75d5e76..aefba899873ed035d70766a95b0b6fea881e94df 100644 --- a/arch/loongarch/vdso/vgetcpu.c +++ b/arch/loongarch/vdso/vgetcpu.c @@ -4,7 +4,6 @@ */ #include <asm/vdso.h> -#include <linux/getcpu.h> static __always_inline int read_cpu_id(void) { @@ -20,8 +19,8 @@ static __always_inline int read_cpu_id(void) } extern -int __vdso_getcpu(unsigned int *cpu, unsigned int *node, struct getcpu_cache *unused); -int __vdso_getcpu(unsigned int *cpu, unsigned int *node, struct getcpu_cache *unused) +int __vdso_getcpu(unsigned int *cpu, unsigned int *node, void *unused); +int __vdso_getcpu(unsigned int *cpu, unsigned int *node, void *unused) { int cpu_id; diff --git a/arch/s390/kernel/vdso64/getcpu.c b/arch/s390/kernel/vdso64/getcpu.c index 5c5d4a848b7669436e73df8e3b711e5b876eb3db..1e17665616c5fa766ca66c8de276b212528934bd 100644 --- a/arch/s390/kernel/vdso64/getcpu.c +++ b/arch/s390/kernel/vdso64/getcpu.c @@ -2,11 +2,10 @@ /* Copyright IBM Corp. 2020 */ #include <linux/compiler.h> -#include <linux/getcpu.h> #include <asm/timex.h> #include "vdso.h" -int __s390_vdso_getcpu(unsigned *cpu, unsigned *node, struct getcpu_cache *unused) +int __s390_vdso_getcpu(unsigned *cpu, unsigned *node, void *unused) { union tod_clock clk; diff --git a/arch/s390/kernel/vdso64/vdso.h b/arch/s390/kernel/vdso64/vdso.h index 9e5397e7b590a23c149ccc6043d0c0b0d5ea8457..cadd307d7a365cabf53f5c8d313be3718625533d 100644 --- a/arch/s390/kernel/vdso64/vdso.h +++ b/arch/s390/kernel/vdso64/vdso.h @@ -4,9 +4,7 @@ #include <vdso/datapage.h> -struct getcpu_cache; - -int __s390_vdso_getcpu(unsigned *cpu, unsigned *node, struct getcpu_cache *unused); +int __s390_vdso_getcpu(unsigned *cpu, unsigned *node, void *unused); int __s390_vdso_gettimeofday(struct __kernel_old_timeval *tv, struct timezone *tz); int __s390_vdso_clock_gettime(clockid_t clock, struct __kernel_timespec *ts); int __s390_vdso_clock_getres(clockid_t clock, struct __kernel_timespec *ts); diff --git a/arch/x86/entry/vdso/vgetcpu.c b/arch/x86/entry/vdso/vgetcpu.c index e4640306b2e3c95d74d73037ab6b09294b8e1d6c..6381b472b7c52487bccf3cbf0664c3d7a0e59699 100644 --- a/arch/x86/entry/vdso/vgetcpu.c +++ b/arch/x86/entry/vdso/vgetcpu.c @@ -6,17 +6,16 @@ */ #include <linux/kernel.h> -#include <linux/getcpu.h> #include <asm/segment.h> #include <vdso/processor.h> notrace long -__vdso_getcpu(unsigned *cpu, unsigned *node, struct getcpu_cache *unused) +__vdso_getcpu(unsigned *cpu, unsigned *node, void *unused) { vdso_read_cpunode(cpu, node); return 0; } -long getcpu(unsigned *cpu, unsigned *node, struct getcpu_cache *tcache) +long getcpu(unsigned *cpu, unsigned *node, void *tcache) __attribute__((weak, alias("__vdso_getcpu"))); diff --git a/arch/x86/include/asm/vdso/processor.h b/arch/x86/include/asm/vdso/processor.h index 7000aeb59aa287e2119c3d43ab3eaf82befb59c4..93e0e24e5cb47f7b0056c13f2a7f2304ed4a0595 100644 --- a/arch/x86/include/asm/vdso/processor.h +++ b/arch/x86/include/asm/vdso/processor.h @@ -18,9 +18,7 @@ static __always_inline void cpu_relax(void) native_pause(); } -struct getcpu_cache; - -notrace long __vdso_getcpu(unsigned *cpu, unsigned *node, struct getcpu_cache *unused); +notrace long __vdso_getcpu(unsigned *cpu, unsigned *node, void *unused); #endif /* __ASSEMBLER__ */ diff --git a/arch/x86/um/vdso/um_vdso.c b/arch/x86/um/vdso/um_vdso.c index cbae2584124fd0ff0f9d240c33fefb8d213c84cd..9aa2c62cce6b7a07bbaf8441014d347162d1950d 100644 --- a/arch/x86/um/vdso/um_vdso.c +++ b/arch/x86/um/vdso/um_vdso.c @@ -10,14 +10,13 @@ #define DISABLE_BRANCH_PROFILING #include <linux/time.h> -#include <linux/getcpu.h> #include <asm/unistd.h> /* workaround for -Wmissing-prototypes warnings */ int __vdso_clock_gettime(clockid_t clock, struct __kernel_old_timespec *ts); int __vdso_gettimeofday(struct __kernel_old_timeval *tv, struct timezone *tz); __kernel_old_time_t __vdso_time(__kernel_old_time_t *t); -long __vdso_getcpu(unsigned int *cpu, unsigned int *node, struct getcpu_cache *unused); +long __vdso_getcpu(unsigned int *cpu, unsigned int *node, void *unused); int __vdso_clock_gettime(clockid_t clock, struct __kernel_old_timespec *ts) { @@ -60,7 +59,7 @@ __kernel_old_time_t __vdso_time(__kernel_old_time_t *t) __kernel_old_time_t time(__kernel_old_time_t *t) __attribute__((weak, alias("__vdso_time"))); long -__vdso_getcpu(unsigned int *cpu, unsigned int *node, struct getcpu_cache *unused) +__vdso_getcpu(unsigned int *cpu, unsigned int *node, void *unused) { /* * UML does not support SMP, we can cheat here. :) @@ -74,5 +73,5 @@ __vdso_getcpu(unsigned int *cpu, unsigned int *node, struct getcpu_cache *unused return 0; } -long getcpu(unsigned int *cpu, unsigned int *node, struct getcpu_cache *tcache) +long getcpu(unsigned int *cpu, unsigned int *node, void *tcache) __attribute__((weak, alias("__vdso_getcpu"))); diff --git a/include/linux/getcpu.h b/include/linux/getcpu.h deleted file mode 100644 index c304dcdb4eac2a9117080e6a14f4e3f28d07fd56..0000000000000000000000000000000000000000 --- a/include/linux/getcpu.h +++ /dev/null @@ -1,19 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -#ifndef _LINUX_GETCPU_H -#define _LINUX_GETCPU_H 1 - -/* Cache for getcpu() to speed it up. Results might be a short time - out of date, but will be faster. - - User programs should not refer to the contents of this structure. - I repeat they should not refer to it. If they do they will break - in future kernels. - - It is only a private cache for vgetcpu(). It will change in future kernels. - The user program must store this information per thread (__thread) - If you want 100% accurate information pass NULL instead. */ -struct getcpu_cache { - unsigned long blob[128 / sizeof(long)]; -}; - -#endif diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index 66c06fcdfe19e27b99eb9a187c22e022e260802f..403488e5eba906ecf40975fc3cb29ed0402491f2 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -59,7 +59,6 @@ struct compat_stat; struct old_timeval32; struct robust_list_head; struct futex_waitv; -struct getcpu_cache; struct old_linux_dirent; struct perf_event_attr; struct file_handle; @@ -714,7 +713,7 @@ asmlinkage long sys_getrusage(int who, struct rusage __user *ru); asmlinkage long sys_umask(int mask); asmlinkage long sys_prctl(int option, unsigned long arg2, unsigned long arg3, unsigned long arg4, unsigned long arg5); -asmlinkage long sys_getcpu(unsigned __user *cpu, unsigned __user *node, struct getcpu_cache __user *cache); +asmlinkage long sys_getcpu(unsigned __user *cpu, unsigned __user *node, void __user *cache); asmlinkage long sys_gettimeofday(struct __kernel_old_timeval __user *tv, struct timezone __user *tz); asmlinkage long sys_settimeofday(struct __kernel_old_timeval __user *tv, diff --git a/kernel/sys.c b/kernel/sys.c index 8b58eece4e580b883d19bb1336aff627ae783a4d..f1780ab132a3fbce6aac937ade5b9a35d9837f13 100644 --- a/kernel/sys.c +++ b/kernel/sys.c @@ -31,7 +31,6 @@ #include <linux/tty.h> #include <linux/signal.h> #include <linux/cn_proc.h> -#include <linux/getcpu.h> #include <linux/task_io_accounting_ops.h> #include <linux/seccomp.h> #include <linux/cpu.h> @@ -2876,8 +2875,7 @@ SYSCALL_DEFINE5(prctl, int, option, unsigned long, arg2, unsigned long, arg3, return error; } -SYSCALL_DEFINE3(getcpu, unsigned __user *, cpup, unsigned __user *, nodep, - struct getcpu_cache __user *, unused) +SYSCALL_DEFINE3(getcpu, unsigned __user *, cpup, unsigned __user *, nodep, void __user *, unused) { int err = 0; int cpu = raw_smp_processor_id(); diff --git a/tools/testing/selftests/vDSO/vdso_test_getcpu.c b/tools/testing/selftests/vDSO/vdso_test_getcpu.c index cdeaed45fb26c61f6314c58fe1b71fa0be3c0108..994ce569dc37c6689b1a3c79156e3dfc8bf27f22 100644 --- a/tools/testing/selftests/vDSO/vdso_test_getcpu.c +++ b/tools/testing/selftests/vDSO/vdso_test_getcpu.c @@ -16,9 +16,7 @@ #include "vdso_config.h" #include "vdso_call.h" -struct getcpu_cache; -typedef long (*getcpu_t)(unsigned int *, unsigned int *, - struct getcpu_cache *); +typedef long (*getcpu_t)(unsigned int *, unsigned int *, void *); int main(int argc, char **argv) { --- base-commit: 3a8660878839faadb4f1a6dd72c3179c1df56787 change-id: 20250825-getcpu_cache-3abcd2e65437 Best regards, -- Thomas Weißschuh <thomas.weissschuh(a)linutronix.de>

2 months, 2 weeks

5
7
0 0

[PATCH v3 0/4] selftests/resctrl: Enable MBM and MBA tests on AMD

by Babu Moger

The MBM (Memory Bandwidth Monitoring) and MBA (Memory Bandwidth Allocation) features are not enabled for AMD systems. The reason was lack of perf counters to compare the resctrl test results. Starting with the commit 25e56847821f ("perf/x86/amd/uncore: Add memory controller support"), AMD now supports the UMC (Unified Memory Controller) perf events. These events can be used to compare the test results. This series adds the support to detect the UMC events and enable MBM/MBA tests for AMD systems. v3: Note: Based the series on top of latest kselftests/master 1613e604df0cd359cf2a7fbd9be7a0bcfacfabd0 (tag: v6.10-rc1). Also applied the patches from the series https://lore.kernel.org/lkml/20240531131142.1716-1-ilpo.jarvinen@linux.inte… Separated the fix patch. Renamed the imc to just mc to make it generic. Changed the search string "uncore_imc_" and "amd_umc_" Changes related rebase to latest kselftest tree. v2: Changes. a. Rebased on top of tip/master (Apr 25, 2024) b. Addressed Ilpo comments except the one about close call. It seems more clear to keep READ and WRITE separate. https://lore.kernel.org/lkml/8e4badb7-6cc5-61f1-e041-d902209a90d5@linux.int… c. Used ksft_perror call when applicable. d. Added vendor check for non contiguous CBM check. v1: https://lore.kernel.org/lkml/cover.1708637563.git.babu.moger@amd.com/ Babu Moger (4): selftests/resctrl: Rename variables and functions to generic names selftests/resctrl: Pass sysfs controller name of the vendor selftests/resctrl: Add support for MBM and MBA tests on AMD selftests/resctrl: Enable MBA/MBA tests on AMD tools/testing/selftests/resctrl/mba_test.c | 25 +- tools/testing/selftests/resctrl/mbm_test.c | 23 +- tools/testing/selftests/resctrl/resctrl.h | 2 +- tools/testing/selftests/resctrl/resctrl_val.c | 305 ++++++++++-------- tools/testing/selftests/resctrl/resctrlfs.c | 2 +- 5 files changed, 191 insertions(+), 166 deletions(-) -- 2.34.1

2 months, 2 weeks

5
15
0 0

[PATCH net v7 0/4] net: netpoll: fix memory leak and add comprehensive selftests

by Breno Leitao

Fix a memory leak in netpoll and introduce netconsole selftests that expose the issue when running with kmemleak detection enabled. This patchset includes a selftest for netpoll with multiple concurrent users (netconsole + bonding), which simulates the scenario from test[1] that originally demonstrated the issue allegedly fixed by commit efa95b01da18 ("netpoll: fix use after free") - a commit that is now being reverted. Sending this to "net" branch because this is a fix, and the selftest might help with the backports validation. Link: https://lore.kernel.org/lkml/96b940137a50e5c387687bb4f57de8b0435a653f.14048… [1] Signed-off-by: Breno Leitao <leitao(a)debian.org> --- Changes in v7: - Rebased on top of `net` - Link to v6: https://lore.kernel.org/r/20251002-netconsole_torture-v6-0-543bf52f6b46@deb… Changes in v6: - Expand the tests even more and some small fixups - Moved the test to bonding selftests - Link to v5: https://lore.kernel.org/r/20250918-netconsole_torture-v5-0-77e25e0a4eb6@deb… Changes in v5: - Set CONFIG_BONDING=m in selftests/drivers/net/config. - Link to v4: https://lore.kernel.org/r/20250917-netconsole_torture-v4-0-0a5b3b8f81ce@deb… Changes in v4: - Added an additional selftest to test multiple netpoll users in parallel - Link to v3: https://lore.kernel.org/r/20250905-netconsole_torture-v3-0-875c7febd316@deb… Changes in v3: - This patchset is a merge of the fix and the selftest together as recommended by Jakub. Changes in v2: - Reuse the netconsole creation from lib_netcons.sh. Thus, refactoring the create_dynamic_target() (Jakub) - Move the "wait" to after all the messages has been sent. - Link to v1: https://lore.kernel.org/r/20250902-netconsole_torture-v1-1-03c6066598e9@deb… --- Breno Leitao (4): net: netpoll: fix incorrect refcount handling causing incorrect cleanup selftest: netcons: refactor target creation selftest: netcons: create a torture test selftest: netcons: add test for netconsole over bonded interfaces net/core/netpoll.c | 7 +- tools/testing/selftests/drivers/net/Makefile | 1 + .../testing/selftests/drivers/net/bonding/Makefile | 2 + tools/testing/selftests/drivers/net/bonding/config | 4 + .../drivers/net/bonding/netcons_over_bonding.sh | 221 +++++++++++++++++++++ .../selftests/drivers/net/lib/sh/lib_netcons.sh | 188 ++++++++++++++++-- .../selftests/drivers/net/netcons_torture.sh | 127 ++++++++++++ 7 files changed, 530 insertions(+), 20 deletions(-) --- base-commit: 7ae421cf78bd795513ec3a7d7ef7ac9437693e23 change-id: 20250902-netconsole_torture-8fc23f0aca99 Best regards, -- Breno Leitao <leitao(a)debian.org>

2 months, 2 weeks

2
8
0 0

[PATCH v2 4/4] selftests/riscv: Add Zicbop prefetch test

by Yao Zihong

Add a new selftest under hwprobe/ to verify Zicbop extension behavior. The test checks: - That hwprobe correctly reports Zicbop presence and block size. - That prefetch instructions execute without exception on valid and NULL addresses when Zicbop is present. - That prefetch.{i,r,w} do not trigger SIGILL even when Zicbop is absent, since Zicbop instructions are defined as hints. The test is based on cbo.c but adapted for Zicbop prefetch instructions. Signed-off-by: Yao Zihong <zihong.plct(a)isrc.iscas.ac.cn> --- .../testing/selftests/riscv/hwprobe/Makefile | 5 +- .../selftests/riscv/hwprobe/prefetch.c | 236 ++++++++++++++++++ 2 files changed, 240 insertions(+), 1 deletion(-) create mode 100644 tools/testing/selftests/riscv/hwprobe/prefetch.c diff --git a/tools/testing/selftests/riscv/hwprobe/Makefile b/tools/testing/selftests/riscv/hwprobe/Makefile index cec81610a5f2..3c8b8ba7629c 100644 --- a/tools/testing/selftests/riscv/hwprobe/Makefile +++ b/tools/testing/selftests/riscv/hwprobe/Makefile @@ -4,7 +4,7 @@ CFLAGS += -I$(top_srcdir)/tools/include -TEST_GEN_PROGS := hwprobe cbo which-cpus +TEST_GEN_PROGS := hwprobe cbo which-cpus prefetch include ../../lib.mk @@ -16,3 +16,6 @@ $(OUTPUT)/cbo: cbo.c sys_hwprobe.S $(OUTPUT)/which-cpus: which-cpus.c sys_hwprobe.S $(CC) -static -o$@ $(CFLAGS) $(LDFLAGS) $^ + +$(OUTPUT)/prefetch: prefetch.c sys_hwprobe.S + $(CC) -static -o$@ $(CFLAGS) $(LDFLAGS) $^ diff --git a/tools/testing/selftests/riscv/hwprobe/prefetch.c b/tools/testing/selftests/riscv/hwprobe/prefetch.c new file mode 100644 index 000000000000..d9ea048325fb --- /dev/null +++ b/tools/testing/selftests/riscv/hwprobe/prefetch.c @@ -0,0 +1,236 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2023 Ventana Micro Systems Inc. + * Copyright (c) 2025 PLCT Lab, ISCAS + * + * Based on tools/testing/selftests/riscv/hwprobe/cbo.c with modifications + * for Zicbop prefetch testing. + * + * Run with 'taskset -c <cpu-list> prefetch' to only execute hwprobe on a + * subset of cpus, as well as only executing the tests on those cpus. + */ +#define _GNU_SOURCE +#include <stdbool.h> +#include <stdint.h> +#include <string.h> +#include <sched.h> +#include <signal.h> +#include <assert.h> +#include <linux/compiler.h> +#include <linux/kernel.h> +#include <asm/ucontext.h> + +#include "hwprobe.h" +#include "../../kselftest.h" + +#define MK_PREFETCH(fn) \ + le32_bswap(0 << 25 | (uint32_t)(fn) << 20 | 10 << 15 | 6 << 12 | 0 << 7 | 19) + +static char mem[4096] __aligned(4096) = { [0 ... 4095] = 0xa5 }; + +static bool illegal; + +static void sigill_handler(int sig, siginfo_t *info, void *context) +{ + unsigned long *regs = (unsigned long *)&((ucontext_t *)context)->uc_mcontext; + uint32_t insn = *(uint32_t *)regs[0]; + + assert(insn == MK_PREFETCH(regs[11])); + + illegal = true; + regs[0] += 4; +} + +#define prefetch_insn(base, fn) \ +({ \ + asm volatile( \ + "mv a0, %0\n" \ + "li a1, %1\n" \ + ".4byte %2\n" \ + : : "r" (base), "i" (fn), "i" (MK_PREFETCH(fn)) : "a0", "a1", "memory");\ +}) + +static void prefetch_i(char *base) { prefetch_insn(base, 0); } + +static void prefetch_r(char *base) { prefetch_insn(base, 1); } + +static void prefetch_w(char *base) { prefetch_insn(base, 3); } + +static bool is_power_of_2(__u64 n) +{ + return n != 0 && (n & (n - 1)) == 0; +} + +static void test_no_zicbop(void *arg) +{ + // Zicbop prefetch.* are HINT instructions. + ksft_print_msg("Testing Zicbop instructions\n"); + + illegal = false; + prefetch_i(&mem[0]); + ksft_test_result(!illegal, "No prefetch.i\n"); + + illegal = false; + prefetch_r(&mem[0]); + ksft_test_result(!illegal, "No prefetch.r\n"); + + illegal = false; + prefetch_w(&mem[0]); + ksft_test_result(!illegal, "No prefetch.w\n"); +} + +static void test_zicbop(void *arg) +{ + struct riscv_hwprobe pair = { + .key = RISCV_HWPROBE_KEY_ZICBOP_BLOCK_SIZE, + }; + cpu_set_t *cpus = (cpu_set_t *)arg; + __u64 block_size; + long rc; + + rc = riscv_hwprobe(&pair, 1, sizeof(cpu_set_t), (unsigned long *)cpus, 0); + block_size = pair.value; + ksft_test_result(rc == 0 && pair.key == RISCV_HWPROBE_KEY_ZICBOP_BLOCK_SIZE && + is_power_of_2(block_size), "Zicbop block size\n"); + ksft_print_msg("Zicbop block size: %llu\n", block_size); + + illegal = false; + prefetch_i(&mem[0]); + prefetch_r(&mem[0]); + prefetch_w(&mem[0]); + ksft_test_result(!illegal, "Zicbop prefetch.* on valid address\n"); + + illegal = false; + prefetch_i(NULL); + prefetch_r(NULL); + prefetch_w(NULL); + ksft_test_result(!illegal, "Zicbop prefetch.* on NULL\n"); +} + +static void check_no_zicbop_cpus(cpu_set_t *cpus) +{ + struct riscv_hwprobe pair = { + .key = RISCV_HWPROBE_KEY_IMA_EXT_0, + }; + cpu_set_t one_cpu; + int i = 0, c = 0; + long rc; + + while (i++ < CPU_COUNT(cpus)) { + while (!CPU_ISSET(c, cpus)) + ++c; + + CPU_ZERO(&one_cpu); + CPU_SET(c, &one_cpu); + + rc = riscv_hwprobe(&pair, 1, sizeof(cpu_set_t), (unsigned long *)&one_cpu, 0); + assert(rc == 0 && pair.key == RISCV_HWPROBE_KEY_IMA_EXT_0); + + if (pair.value & RISCV_HWPROBE_EXT_ZICBOP) + ksft_exit_fail_msg("zicbop is only present on a subset of harts.\n" + "Use taskset to select a set of harts where zicbop\n" + "presence (present or not) is consistent for each hart\n"); + ++c; + } +} + +enum { + TEST_ZICBOP, + TEST_NO_ZICBOP, +}; + +enum { + HANDLER_SIGILL, + HANDLER_SIGSEGV, + HANDLER_SIGBUS, +}; + +static struct test_info { + bool enabled; + unsigned int nr_tests; + void (*test_fn)(void *arg); +} tests[] = { + [TEST_ZICBOP] = { .nr_tests = 3, test_zicbop }, + [TEST_NO_ZICBOP] = { .nr_tests = 3, test_no_zicbop }, +}; + +static struct sighandler_info { + const char *flag; + int sig; +} handlers[] = { + [HANDLER_SIGILL] = { .flag = "--sigill", .sig = SIGILL }, + [HANDLER_SIGSEGV] = { .flag = "--sigsegv", .sig = SIGSEGV }, + [HANDLER_SIGBUS] = { .flag = "--sigbus", .sig = SIGBUS }, +}; + +static bool search_flag(int argc, char **argv, const char *flag) +{ + int i; + + for (i = 1; i < argc; i++) { + if (!strcmp(argv[i], flag)) + return true; + } + return false; +} + +static void install_sigaction(int argc, char **argv) +{ + int i, rc; + struct sigaction act = { + .sa_sigaction = &sigill_handler, + .sa_flags = SA_SIGINFO, + }; + + for (i = 0; i < ARRAY_SIZE(handlers); ++i) { + if (search_flag(argc, argv, handlers[i].flag)) { + rc = sigaction(handlers[i].sig, &act, NULL); + assert(rc == 0); + } + } + + if (search_flag(argc, argv, handlers[HANDLER_SIGILL].flag)) + tests[TEST_NO_ZICBOP].enabled = true; +} + +int main(int argc, char **argv) +{ + struct riscv_hwprobe pair; + unsigned int plan = 0; + cpu_set_t cpus; + long rc; + int i; + + install_sigaction(argc, argv); + + rc = sched_getaffinity(0, sizeof(cpu_set_t), &cpus); + assert(rc == 0); + + ksft_print_header(); + + pair.key = RISCV_HWPROBE_KEY_IMA_EXT_0; + rc = riscv_hwprobe(&pair, 1, sizeof(cpu_set_t), (unsigned long *)&cpus, 0); + if (rc < 0) + ksft_exit_fail_msg("hwprobe() failed with %ld\n", rc); + assert(rc == 0 && pair.key == RISCV_HWPROBE_KEY_IMA_EXT_0); + + if (pair.value & RISCV_HWPROBE_EXT_ZICBOP) + tests[TEST_ZICBOP].enabled = true; + else + check_no_zicbop_cpus(&cpus); + + for (i = 0; i < ARRAY_SIZE(tests); ++i) + plan += tests[i].enabled ? tests[i].nr_tests : 0; + + if (plan == 0) + ksft_print_msg("No tests enabled.\n"); + else + ksft_set_plan(plan); + + for (i = 0; i < ARRAY_SIZE(tests); ++i) { + if (tests[i].enabled) + tests[i].test_fn(&cpus); + } + + ksft_finished(); +} -- 2.47.2

2 months, 2 weeks

2
3
0 0

[PATCH 0/2] KVM: x86: selftests: add L1TF exploit test

by Brendan Jackman

This has been tested on a Google Skylake platform. One potential issue with this test is that it fails (that is, the exploit succeeds) when using the conditional L1D flush, because the gadget is injected into the hypercall path which doesn't appear to include a flush. If this is unacceptable, we should discuss how to amend the test so that it can be used to evaluate the conditional flush logic as well. This would basically mean simulating some more complicated gadget where the "attacker" has found another way to steer the host kernel towards the target data, instead of just a simple hypercall. The reason this limitation is tolerable to me is my ulterior motive, i.e. because I am specifically interested in an end-to-end test for Address Space Isolation [0], which is abstracted from these details of the exploit. Based on kvm/next. [0] https://lore.kernel.org/all/20250924-b4-asi-page-alloc-v1-0-2d861768041f@go… Signed-off-by: Brendan Jackman <jackmanb(a)google.com> --- Alexandra Sandulescu (1): KVM: x86: selftests: add an L1TF exploit test Brendan Jackman (1): selftests: fix installing nested TEST_GEN_MODS_DIR tools/testing/selftests/kvm/Makefile.kvm | 7 + tools/testing/selftests/kvm/x86/l1tf_test.c | 633 +++++++++++++++++++++ tools/testing/selftests/kvm/x86/l1tf_test.sh | 10 + .../selftests/kvm/x86/test_modules/Makefile | 10 + .../kvm/x86/test_modules/l1tf_test_helper.c | 92 +++ tools/testing/selftests/lib.mk | 2 +- 6 files changed, 753 insertions(+), 1 deletion(-) --- base-commit: 6b36119b94d0b2bb8cea9d512017efafd461d6ac change-id: 20251013-l1tf-test-1bee540cefb4 Best regards, -- Brendan Jackman <jackmanb(a)google.com>

2 months, 2 weeks

1
3
0 0

[PATCH v19 00/27] riscv control-flow integrity for usermode

by Deepak Gupta

Basics and overview =================== Software with larger attack surfaces (e.g. network facing apps like databases, browsers or apps relying on browser runtimes) suffer from memory corruption issues which can be utilized by attackers to bend control flow of the program to eventually gain control (by making their payload executable). Attackers are able to perform such attacks by leveraging call-sites which rely on indirect calls or return sites which rely on obtaining return address from stack memory. To mitigate such attacks, risc-v extension zicfilp enforces that all indirect calls must land on a landing pad instruction `lpad` else cpu will raise software check exception (a new cpu exception cause code on riscv). Similarly for return flow, risc-v extension zicfiss extends architecture with - `sspush` instruction to push return address on a shadow stack - `sspopchk` instruction to pop return address from shadow stack and compare with input operand (i.e. return address on stack) - `sspopchk` to raise software check exception if comparision above was a mismatch - Protection mechanism using which shadow stack is not writeable via regular store instructions More information an details can be found at extensions github repo [1]. Equivalent to landing pad (zicfilp) on x86 is `ENDBRANCH` instruction in Intel CET [3] and branch target identification (BTI) [4] on arm. Similarly x86's Intel CET has shadow stack [5] and arm64 has guarded control stack (GCS) [6] which are very similar to risc-v's zicfiss shadow stack. x86 and arm64 support for user mode shadow stack is already in mainline. Kernel awareness for user control flow integrity ================================================ This series picks up Samuel Holland's envcfg changes [2] as well. So if those are being applied independently, they should be removed from this series. Enabling: In order to maintain compatibility and not break anything in user mode, kernel doesn't enable control flow integrity cpu extensions on binary by default. Instead exposes a prctl interface to enable, disable and lock the shadow stack or landing pad feature for a task. This allows userspace (loader) to enumerate if all objects in its address space are compiled with shadow stack and landing pad support and accordingly enable the feature. Additionally if a subsequent `dlopen` happens on a library, user mode can take a decision again to disable the feature (if incoming library is not compiled with support) OR terminate the task (if user mode policy is strict to have all objects in address space to be compiled with control flow integirty cpu feature). prctl to enable shadow stack results in allocating shadow stack from virtual memory and activating for user address space. x86 and arm64 are also following same direction due to similar reason(s). clone/fork: On clone and fork, cfi state for task is inherited by child. Shadow stack is part of virtual memory and is a writeable memory from kernel perspective (writeable via a restricted set of instructions aka shadow stack instructions) Thus kernel changes ensure that this memory is converted into read-only when fork/clone happens and COWed when fault is taken due to sspush, sspopchk or ssamoswap. In case `CLONE_VM` is specified and shadow stack is to be enabled, kernel will automatically allocate a shadow stack for that clone call. map_shadow_stack: x86 introduced `map_shadow_stack` system call to allow user space to explicitly map shadow stack memory in its address space. It is useful to allocate shadow for different contexts managed by a single thread (green threads or contexts) risc-v implements this system call as well. signal management: If shadow stack is enabled for a task, kernel performs an asynchronous control flow diversion to deliver the signal and eventually expects userspace to issue sigreturn so that original execution can be resumed. Even though resume context is prepared by kernel, it is in user space memory and is subject to memory corruption and corruption bugs can be utilized by attacker in this race window to perform arbitrary sigreturn and eventually bypass cfi mechanism. Another issue is how to ensure that cfi related state on sigcontext area is not trampled by legacy apps or apps compiled with old kernel headers. In order to mitigate control-flow hijacting, kernel prepares a token and place it on shadow stack before signal delivery and places address of token in sigcontext structure. During sigreturn, kernel obtains address of token from sigcontext struture, reads token from shadow stack and validates it and only then allow sigreturn to succeed. Compatiblity issue is solved by adopting dynamic sigcontext management introduced for vector extension. This series re-factor the code little bit to allow future sigcontext management easy (as proposed by Andy Chiu from SiFive) config and compilation: Introduce a new risc-v config option `CONFIG_RISCV_USER_CFI`. Selecting this config option picks the kernel support for user control flow integrity. This optin is presented only if toolchain has shadow stack and landing pad support. And is on purpose guarded by toolchain support. Reason being that eventually vDSO also needs to be compiled in with shadow stack and landing pad support. vDSO compile patches are not included as of now because landing pad labeling scheme is yet to settle for usermode runtime. To get more information on kernel interactions with respect to zicfilp and zicfiss, patch series adds documentation for `zicfilp` and `zicfiss` in following: Documentation/arch/riscv/zicfiss.rst Documentation/arch/riscv/zicfilp.rst How to test this series ======================= Toolchain --------- $ git clone git@github.com:sifive/riscv-gnu-toolchain.git -b cfi-dev $ riscv-gnu-toolchain/configure --prefix=<path-to-where-to-build> --with-arch=rv64gc_zicfilp_zicfiss --enable-linux --disable-gdb --with-extra-multilib-test="rv64gc_zicfilp_zicfiss-lp64d:-static" $ make -j$(nproc) Qemu ---- Get the lastest qemu $ cd qemu $ mkdir build $ cd build $ ../configure --target-list=riscv64-softmmu $ make -j$(nproc) Opensbi ------- $ git clone git@github.com:deepak0414/opensbi.git -b v6_cfi_spec_split_opensbi $ make CROSS_COMPILE=<your riscv toolchain> -j$(nproc) PLATFORM=generic Linux ----- Running defconfig is fine. CFI is enabled by default if the toolchain supports it. $ make ARCH=riscv CROSS_COMPILE=<path-to-cfi-riscv-gnu-toolchain>/build/bin/riscv64-unknown-linux-gnu- -j$(nproc) defconfig $ make ARCH=riscv CROSS_COMPILE=<path-to-cfi-riscv-gnu-toolchain>/build/bin/riscv64-unknown-linux-gnu- -j$(nproc) In case you're building your own rootfs using toolchain, please make sure you pick following patch to ensure that vDSO compiled with lpad and shadow stack. "arch/riscv: compile vdso with landing pad" Branch where above patch can be picked https://github.com/deepak0414/linux-riscv-cfi/tree/vdso_user_cfi_v6.12-rc1 Running ------- Modify your qemu command to have: -bios <path-to-cfi-opensbi>/build/platform/generic/firmware/fw_dynamic.bin -cpu rv64,zicfilp=true,zicfiss=true,zimop=true,zcmop=true vDSO related Opens (in the flux) ================================= I am listing these opens for laying out plan and what to expect in future patch sets. And of course for the sake of discussion. Shadow stack and landing pad enabling in vDSO ---------------------------------------------- vDSO must have shadow stack and landing pad support compiled in for task to have shadow stack and landing pad support. This patch series doesn't enable that (yet). Enabling shadow stack support in vDSO should be straight forward (intend to do that in next versions of patch set). Enabling landing pad support in vDSO requires some collaboration with toolchain folks to follow a single label scheme for all object binaries. This is necessary to ensure that all indirect call-sites are setting correct label and target landing pads are decorated with same label scheme. How many vDSOs --------------- Shadow stack instructions are carved out of zimop (may be operations) and if CPU doesn't implement zimop, they're illegal instructions. Kernel could be running on a CPU which may or may not implement zimop. And thus kernel will have to carry 2 different vDSOs and expose the appropriate one depending on whether CPU implements zimop or not. References ========== [1] - https://github.com/riscv/riscv-cfi [2] - https://lore.kernel.org/all/20240814081126.956287-1-samuel.holland@sifive.c… [3] - https://lwn.net/Articles/889475/ [4] - https://developer.arm.com/documentation/109576/0100/Branch-Target-Identific… [5] - https://www.intel.com/content/dam/develop/external/us/en/documents/catc17-i… [6] - https://lwn.net/Articles/940403/ To: Thomas Gleixner <tglx(a)linutronix.de> To: Ingo Molnar <mingo(a)redhat.com> To: Borislav Petkov <bp(a)alien8.de> To: Dave Hansen <dave.hansen(a)linux.intel.com> To: x86(a)kernel.org To: H. Peter Anvin <hpa(a)zytor.com> To: Andrew Morton <akpm(a)linux-foundation.org> To: Liam R. Howlett <Liam.Howlett(a)oracle.com> To: Vlastimil Babka <vbabka(a)suse.cz> To: Lorenzo Stoakes <lorenzo.stoakes(a)oracle.com> To: Paul Walmsley <paul.walmsley(a)sifive.com> To: Palmer Dabbelt <palmer(a)dabbelt.com> To: Albert Ou <aou(a)eecs.berkeley.edu> To: Conor Dooley <conor(a)kernel.org> To: Rob Herring <robh(a)kernel.org> To: Krzysztof Kozlowski <krzk+dt(a)kernel.org> To: Arnd Bergmann <arnd(a)arndb.de> To: Christian Brauner <brauner(a)kernel.org> To: Peter Zijlstra <peterz(a)infradead.org> To: Oleg Nesterov <oleg(a)redhat.com> To: Eric Biederman <ebiederm(a)xmission.com> To: Kees Cook <kees(a)kernel.org> To: Jonathan Corbet <corbet(a)lwn.net> To: Shuah Khan <shuah(a)kernel.org> To: Jann Horn <jannh(a)google.com> To: Conor Dooley <conor+dt(a)kernel.org> To: Miguel Ojeda <ojeda(a)kernel.org> To: Alex Gaynor <alex.gaynor(a)gmail.com> To: Boqun Feng <boqun.feng(a)gmail.com> To: Gary Guo <gary(a)garyguo.net> To: Björn Roy Baron <bjorn3_gh(a)protonmail.com> To: Benno Lossin <benno.lossin(a)proton.me> To: Andreas Hindborg <a.hindborg(a)kernel.org> To: Alice Ryhl <aliceryhl(a)google.com> To: Trevor Gross <tmgross(a)umich.edu> Cc: linux-kernel(a)vger.kernel.org Cc: linux-fsdevel(a)vger.kernel.org Cc: linux-mm(a)kvack.org Cc: linux-riscv(a)lists.infradead.org Cc: devicetree(a)vger.kernel.org Cc: linux-arch(a)vger.kernel.org Cc: linux-doc(a)vger.kernel.org Cc: linux-kselftest(a)vger.kernel.org Cc: alistair.francis(a)wdc.com Cc: richard.henderson(a)linaro.org Cc: jim.shu(a)sifive.com Cc: andybnac(a)gmail.com Cc: kito.cheng(a)sifive.com Cc: charlie(a)rivosinc.com Cc: atishp(a)rivosinc.com Cc: evan(a)rivosinc.com Cc: cleger(a)rivosinc.com Cc: alexghiti(a)rivosinc.com Cc: samitolvanen(a)google.com Cc: broonie(a)kernel.org Cc: rick.p.edgecombe(a)intel.com Cc: rust-for-linux(a)vger.kernel.org changelog --------- v19: - riscv_nousercfi was `int`. changed it to unsigned long. Thanks to Alex Ghiti for reporting it. It was a bug. - ELP is cleared on trap entry only when CONFIG_64BIT. - restore ssp back on return to usermode was being done before `riscv_v_context_nesting_end` on trap exit path. If kernel shadow stack were enabled this would result in kernel operating on user shadow stack and panic (as I found in my testing of kcfi patch series). So fixed that. v18: - rebased on 6.16-rc1 - uprobe handling clears ELP in sstatus image in pt_regs - vdso was missing shadow stack elf note for object files. added that. Additional asm file for vdso needed the elf marker flag. toolchain should complain if `-fcf-protection=full` and marker is missing for object generated from asm file. Asked toolchain folks to fix this. Although no reason to gate the merge on that. - Split up compile options for march and fcf-protection in vdso Makefile - CONFIG_RISCV_USER_CFI option is moved under "Kernel features" menu Added `arch/riscv/configs/hardening.config` fragment which selects CONFIG_RISCV_USER_CFI v17: - fixed warnings due to empty macros in usercfi.h (reported by alexg) - fixed prefixes in commit titles reported by alexg - took below uprobe with fcfi v2 patch from Zong Li and squashed it with "riscv/traps: Introduce software check exception and uprobe handling" https://lore.kernel.org/all/20250604093403.10916-1-zong.li@sifive.com/ v16: - If FWFT is not implemented or returns error for shadow stack activation, then no_usercfi is set to disable shadow stack. Although this should be picked up by extension validation and activation. Fixed this bug for zicfilp and zicfiss both. Thanks to Charlie Jenkins for reporting this. - If toolchain doesn't support cfi, cfi kselftest shouldn't build. Suggested by Charlie Jenkins. - Default for CONFIG_RISCV_USER_CFI is set to no. Charlie/Atish suggested to keep it off till we have more hardware availibility with RVA23 profile and zimop/zcmop implemented. Else this will start breaking people's workflow - Includes the fix if "!RV64 and !SBI" then definitions for FWFT in asm-offsets.c error. v15: - Toolchain has been updated to include `-fcf-protection` flag. This exists for x86 as well. Updated kernel patches to compile vDSO and selftest to compile with `fcf-protection=full` flag. - selecting CONFIG_RISCV_USERCFI selects CONFIG_RISCV_SBI. - Patch to enable shadow stack for kernel wasn't hidden behind CONFIG_RISCV_USERCFI and CONFIG_RISCV_SBI. fixed that. v14: - rebased on top of palmer/sbi-v3. Thus dropped clement's FWFT patches Updated RISCV_ISA_EXT_XXXX in hwcap and hwprobe constants. - Took Radim's suggestions on bitfields. - Placed cfi_state at the end of thread_info block so that current situation is not disturbed with respect to member fields of thread_info in single cacheline. v13: - cpu_supports_shadow_stack/cpu_supports_indirect_br_lp_instr uses riscv_has_extension_unlikely() - uses nops(count) to create nop slide - RISCV_ACQUIRE_BARRIER is not needed in `amo_user_shstk`. Removed it - changed ternaries to simply use implicit casting to convert to bool. - kernel command line allows to disable zicfilp and zicfiss independently. updated kernel-parameters.txt. - ptrace user abi for cfi uses bitmasks instead of bitfields. Added ptrace kselftest. - cosmetic and grammatical changes to documentation. v12: - It seems like I had accidently squashed arch agnostic indirect branch tracking prctl and riscv implementation of those prctls. Split them again. - set_shstk_status/set_indir_lp_status perform CSR writes only when CPU support is available. As suggested by Zong Li. - Some minor clean up in kselftests as suggested by Zong Li. v11: - patch "arch/riscv: compile vdso with landing pad" was unconditionally selecting `_zicfilp` for vDSO compile. fixed that. Changed `lpad 1` to to `lpad 0`. v10: - dropped "mm: helper `is_shadow_stack_vma` to check shadow stack vma". This patch is not that interesting to this patch series for risc-v. There are instances in arch directories where VM_SHADOW_STACK flag is anyways used. Dropping this patch to expedite merging in riscv tree. - Took suggestions from `Clement` on "riscv: zicfiss / zicfilp enumeration" to validate presence of cfi based on config. - Added a patch for vDSO to have `lpad 0`. I had omitted this earlier to make sure we add single vdso object with cfi enabled. But a vdso object with scheme of zero labeled landing pad is least common denominator and should work with all objects of zero labeled as well as function-signature labeled objects. v9: - rebased on master (39a803b754d5 fix braino in "9p: fix ->rename_sem exclusion") - dropped "mm: Introduce ARCH_HAS_USER_SHADOW_STACK" (master has it from arm64/gcs) - dropped "prctl: arch-agnostic prctl for shadow stack" (master has it from arm64/gcs) v8: - rebased on palmer/for-next - dropped samuel holland's `envcfg` context switch patches. they are in parlmer/for-next v7: - Removed "riscv/Kconfig: enable HAVE_EXIT_THREAD for riscv" Instead using `deactivate_mm` flow to clean up. see here for more context https://lore.kernel.org/all/20230908203655.543765-1-rick.p.edgecombe@intel.… - Changed the header include in `kselftest`. Hopefully this fixes compile issue faced by Zong Li at SiFive. - Cleaned up an orphaned change to `mm/mmap.c` in below patch "riscv/mm : ensure PROT_WRITE leads to VM_READ | VM_WRITE" - Lock interfaces for shadow stack and indirect branch tracking expect arg == 0 Any future evolution of this interface should accordingly define how arg should be setup. - `mm/map.c` has an instance of using `VM_SHADOW_STACK`. Fixed it to use helper `is_shadow_stack_vma`. - Link to v6: https://lore.kernel.org/r/20241008-v5_user_cfi_series-v6-0-60d9fe073f37@riv… v6: - Picked up Samuel Holland's changes as is with `envcfg` placed in `thread` instead of `thread_info` - fixed unaligned newline escapes in kselftest - cleaned up messages in kselftest and included test output in commit message - fixed a bug in clone path reported by Zong Li - fixed a build issue if CONFIG_RISCV_ISA_V is not selected (this was introduced due to re-factoring signal context management code) v5: - rebased on v6.12-rc1 - Fixed schema related issues in device tree file - Fixed some of the documentation related issues in zicfilp/ss.rst (style issues and added index) - added `SHADOW_STACK_SET_MARKER` so that implementation can define base of shadow stack. - Fixed warnings on definitions added in usercfi.h when CONFIG_RISCV_USER_CFI is not selected. - Adopted context header based signal handling as proposed by Andy Chiu - Added support for enabling kernel mode access to shadow stack using FWFT (https://github.com/riscv-non-isa/riscv-sbi-doc/blob/master/src/ext-firmware…) - Link to v5: https://lore.kernel.org/r/20241001-v5_user_cfi_series-v1-0-3ba65b6e550f@riv… (Note: I had an issue in my workflow due to which version number wasn't picked up correctly while sending out patches) v4: - rebased on 6.11-rc6 - envcfg: Converged with Samuel Holland's patches for envcfg management on per- thread basis. - vma_is_shadow_stack is renamed to is_vma_shadow_stack - picked up Mark Brown's `ARCH_HAS_USER_SHADOW_STACK` patch - signal context: using extended context management to maintain compatibility. - fixed `-Wmissing-prototypes` compiler warnings for prctl functions - Documentation fixes and amending typos. - Link to v4: https://lore.kernel.org/all/20240912231650.3740732-1-debug@rivosinc.com/ v3: - envcfg logic to pick up base envcfg had a bug where `ENVCFG_CBZE` could have been picked on per task basis, even though CPU didn't implement it. Fixed in this series. - dt-bindings As suggested, split into separate commit. fixed the messaging that spec is in public review - arch_is_shadow_stack change arch_is_shadow_stack changed to vma_is_shadow_stack - hwprobe zicfiss / zicfilp if present will get enumerated in hwprobe - selftests As suggested, added object and binary filenames to .gitignore Selftest binary anyways need to be compiled with cfi enabled compiler which will make sure that landing pad and shadow stack are enabled. Thus removed separate enable/disable tests. Cleaned up tests a bit. - Link to v3: https://lore.kernel.org/lkml/20240403234054.2020347-1-debug@rivosinc.com/ v2: - Using config `CONFIG_RISCV_USER_CFI`, kernel support for riscv control flow integrity for user mode programs can be compiled in the kernel. - Enabling of control flow integrity for user programs is left to user runtime - This patch series introduces arch agnostic `prctls` to enable shadow stack and indirect branch tracking. And implements them on riscv. --- Changes in v19: - Link to v18: https://lore.kernel.org/r/20250711-v5_user_cfi_series-v18-0-a8ee62f9f38e@ri… Changes in v18: - Link to v17: https://lore.kernel.org/r/20250604-v5_user_cfi_series-v17-0-4565c2cf869f@ri… Changes in v17: - Link to v16: https://lore.kernel.org/r/20250522-v5_user_cfi_series-v16-0-64f61a35eee7@ri… Changes in v16: - Link to v15: https://lore.kernel.org/r/20250502-v5_user_cfi_series-v15-0-914966471885@ri… Changes in v15: - changelog posted just below cover letter - Link to v14: https://lore.kernel.org/r/20250429-v5_user_cfi_series-v14-0-5239410d012a@ri… Changes in v14: - changelog posted just below cover letter - Link to v13: https://lore.kernel.org/r/20250424-v5_user_cfi_series-v13-0-971437de586a@ri… Changes in v13: - changelog posted just below cover letter - Link to v12: https://lore.kernel.org/r/20250314-v5_user_cfi_series-v12-0-e51202b53138@ri… Changes in v12: - changelog posted just below cover letter - Link to v11: https://lore.kernel.org/r/20250310-v5_user_cfi_series-v11-0-86b36cbfb910@ri… Changes in v11: - changelog posted just below cover letter - Link to v10: https://lore.kernel.org/r/20250210-v5_user_cfi_series-v10-0-163dcfa31c60@ri… --- Andy Chiu (1): riscv: signal: abstract header saving for setup_sigcontext Deepak Gupta (25): mm: VM_SHADOW_STACK definition for riscv dt-bindings: riscv: zicfilp and zicfiss in dt-bindings (extensions.yaml) riscv: zicfiss / zicfilp enumeration riscv: zicfiss / zicfilp extension csr and bit definitions riscv: usercfi state for task and save/restore of CSR_SSP on trap entry/exit riscv/mm : ensure PROT_WRITE leads to VM_READ | VM_WRITE riscv/mm: manufacture shadow stack pte riscv/mm: teach pte_mkwrite to manufacture shadow stack PTEs riscv/mm: write protect and shadow stack riscv/mm: Implement map_shadow_stack() syscall riscv/shstk: If needed allocate a new shadow stack on clone riscv: Implements arch agnostic shadow stack prctls prctl: arch-agnostic prctl for indirect branch tracking riscv: Implements arch agnostic indirect branch tracking prctls riscv/traps: Introduce software check exception and uprobe handling riscv/signal: save and restore of shadow stack for signal riscv/kernel: update __show_regs to print shadow stack register riscv/ptrace: riscv cfi status and state via ptrace and in core files riscv/hwprobe: zicfilp / zicfiss enumeration in hwprobe riscv: kernel command line option to opt out of user cfi riscv: enable kernel access to shadow stack memory via FWFT sbi call riscv: create a config for shadow stack and landing pad instr support riscv: Documentation for landing pad / indirect branch tracking riscv: Documentation for shadow stack on riscv kselftest/riscv: kselftest for user mode cfi Jim Shu (1): arch/riscv: compile vdso with landing pad and shadow stack note Documentation/admin-guide/kernel-parameters.txt | 8 + Documentation/arch/riscv/index.rst | 2 + Documentation/arch/riscv/zicfilp.rst | 115 +++++ Documentation/arch/riscv/zicfiss.rst | 179 +++++++ .../devicetree/bindings/riscv/extensions.yaml | 14 + arch/riscv/Kconfig | 21 + arch/riscv/Makefile | 5 +- arch/riscv/configs/hardening.config | 4 + arch/riscv/include/asm/asm-prototypes.h | 1 + arch/riscv/include/asm/assembler.h | 44 ++ arch/riscv/include/asm/cpufeature.h | 12 + arch/riscv/include/asm/csr.h | 16 + arch/riscv/include/asm/entry-common.h | 2 + arch/riscv/include/asm/hwcap.h | 2 + arch/riscv/include/asm/mman.h | 26 + arch/riscv/include/asm/mmu_context.h | 7 + arch/riscv/include/asm/pgtable.h | 30 +- arch/riscv/include/asm/processor.h | 1 + arch/riscv/include/asm/thread_info.h | 3 + arch/riscv/include/asm/usercfi.h | 95 ++++ arch/riscv/include/asm/vector.h | 3 + arch/riscv/include/uapi/asm/hwprobe.h | 2 + arch/riscv/include/uapi/asm/ptrace.h | 34 ++ arch/riscv/include/uapi/asm/sigcontext.h | 1 + arch/riscv/kernel/Makefile | 1 + arch/riscv/kernel/asm-offsets.c | 10 + arch/riscv/kernel/cpufeature.c | 27 + arch/riscv/kernel/entry.S | 38 ++ arch/riscv/kernel/head.S | 27 + arch/riscv/kernel/process.c | 27 +- arch/riscv/kernel/ptrace.c | 95 ++++ arch/riscv/kernel/signal.c | 148 +++++- arch/riscv/kernel/sys_hwprobe.c | 2 + arch/riscv/kernel/sys_riscv.c | 10 + arch/riscv/kernel/traps.c | 54 ++ arch/riscv/kernel/usercfi.c | 545 +++++++++++++++++++++ arch/riscv/kernel/vdso/Makefile | 11 +- arch/riscv/kernel/vdso/flush_icache.S | 4 + arch/riscv/kernel/vdso/getcpu.S | 4 + arch/riscv/kernel/vdso/rt_sigreturn.S | 4 + arch/riscv/kernel/vdso/sys_hwprobe.S | 4 + arch/riscv/kernel/vdso/vgetrandom-chacha.S | 5 +- arch/riscv/mm/init.c | 2 +- arch/riscv/mm/pgtable.c | 16 + include/linux/cpu.h | 4 + include/linux/mm.h | 7 + include/uapi/linux/elf.h | 2 + include/uapi/linux/prctl.h | 27 + kernel/sys.c | 30 ++ tools/testing/selftests/riscv/Makefile | 2 +- tools/testing/selftests/riscv/cfi/.gitignore | 3 + tools/testing/selftests/riscv/cfi/Makefile | 16 + tools/testing/selftests/riscv/cfi/cfi_rv_test.h | 82 ++++ tools/testing/selftests/riscv/cfi/riscv_cfi_test.c | 173 +++++++ tools/testing/selftests/riscv/cfi/shadowstack.c | 385 +++++++++++++++ tools/testing/selftests/riscv/cfi/shadowstack.h | 27 + 56 files changed, 2389 insertions(+), 30 deletions(-) --- base-commit: a2a05801de77ca5122fc34e3eb84d6359ef70389 change-id: 20240930-v5_user_cfi_series-3dc332f8f5b2 -- - debug

2 months, 2 weeks

8
50
0 0

[PATCH net v3] selftests: drv-net: update remaining Python init files

by Stanislav Fomichev

From: Jakub Kicinski <kuba(a)kernel.org> Convert remaining __init__ files similar to what we did in commit b615879dbfea ("selftests: drv-net: make linters happy with our imports") Signed-off-by: Jakub Kicinski <kuba(a)kernel.org> Signed-off-by: Stanislav Fomichev <sdf(a)fomichev.me> --- v3: - add my SoB (sending on behalf of Jakub) v2: - remove tool from imports in driver __init__s it's not actually used v1: https://lore.kernel.org/20251007144326.1763309-1-kuba@kernel.org CC: shuah(a)kernel.org CC: willemb(a)google.com CC: daniel.zahka(a)gmail.com CC: linux-kselftest(a)vger.kernel.org --- .../drivers/net/hw/lib/py/__init__.py | 40 ++++++++++++++----- .../selftests/drivers/net/lib/py/__init__.py | 4 +- .../testing/selftests/net/lib/py/__init__.py | 29 ++++++++++++-- 3 files changed, 57 insertions(+), 16 deletions(-) diff --git a/tools/testing/selftests/drivers/net/hw/lib/py/__init__.py b/tools/testing/selftests/drivers/net/hw/lib/py/__init__.py index 0ceb297e7757..fb010a48a5a1 100644 --- a/tools/testing/selftests/drivers/net/hw/lib/py/__init__.py +++ b/tools/testing/selftests/drivers/net/hw/lib/py/__init__.py @@ -1,5 +1,13 @@ # SPDX-License-Identifier: GPL-2.0 +""" +Driver test environment (hardware-only tests). +NetDrvEnv and NetDrvEpEnv are the main environment classes. +Former is for local host only tests, latter creates / connects +to a remote endpoint. See NIPA wiki for more information about +running and writing driver tests. +""" + import sys from pathlib import Path @@ -8,26 +16,36 @@ KSFT_DIR = (Path(__file__).parent / "../../../../..").resolve() try: sys.path.append(KSFT_DIR.as_posix()) - from net.lib.py import * - from drivers.net.lib.py import * - # Import one by one to avoid pylint false positives + from net.lib.py import NetNS, NetNSEnter, NetdevSimDev from net.lib.py import EthtoolFamily, NetdevFamily, NetshaperFamily, \ NlError, RtnlFamily, DevlinkFamily, PSPFamily from net.lib.py import CmdExitFailure - from net.lib.py import bkg, cmd, defer, ethtool, fd_read_timeout, ip, \ - rand_port, tool, wait_port_listen - from net.lib.py import fd_read_timeout + from net.lib.py import bkg, cmd, bpftool, bpftrace, defer, ethtool, \ + fd_read_timeout, ip, rand_port, wait_port_listen, wait_file from net.lib.py import KsftSkipEx, KsftFailEx, KsftXfailEx from net.lib.py import ksft_disruptive, ksft_exit, ksft_pr, ksft_run, \ ksft_setup from net.lib.py import ksft_eq, ksft_ge, ksft_in, ksft_is, ksft_lt, \ ksft_ne, ksft_not_in, ksft_raises, ksft_true, ksft_gt, ksft_not_none - from net.lib.py import NetNSEnter - from drivers.net.lib.py import GenerateTraffic + from drivers.net.lib.py import GenerateTraffic, Remote from drivers.net.lib.py import NetDrvEnv, NetDrvEpEnv + + __all__ = ["NetNS", "NetNSEnter", "NetdevSimDev", + "EthtoolFamily", "NetdevFamily", "NetshaperFamily", + "NlError", "RtnlFamily", "DevlinkFamily", "PSPFamily", + "CmdExitFailure", + "bkg", "cmd", "bpftool", "bpftrace", "defer", "ethtool", + "fd_read_timeout", "ip", "rand_port", + "wait_port_listen", "wait_file", + "KsftSkipEx", "KsftFailEx", "KsftXfailEx", + "ksft_disruptive", "ksft_exit", "ksft_pr", "ksft_run", + "ksft_setup", + "ksft_eq", "ksft_ge", "ksft_in", "ksft_is", "ksft_lt", + "ksft_ne", "ksft_not_in", "ksft_raises", "ksft_true", "ksft_gt", + "ksft_not_none", "ksft_not_none", + "NetDrvEnv", "NetDrvEpEnv", "GenerateTraffic", "Remote"] except ModuleNotFoundError as e: - ksft_pr("Failed importing `net` library from kernel sources") - ksft_pr(str(e)) - ktap_result(True, comment="SKIP") + print("Failed importing `net` library from kernel sources") + print(str(e)) sys.exit(4) diff --git a/tools/testing/selftests/drivers/net/lib/py/__init__.py b/tools/testing/selftests/drivers/net/lib/py/__init__.py index e6c070f32f51..b0c6300150fb 100644 --- a/tools/testing/selftests/drivers/net/lib/py/__init__.py +++ b/tools/testing/selftests/drivers/net/lib/py/__init__.py @@ -22,7 +22,7 @@ KSFT_DIR = (Path(__file__).parent / "../../../..").resolve() NlError, RtnlFamily, DevlinkFamily, PSPFamily from net.lib.py import CmdExitFailure from net.lib.py import bkg, cmd, bpftool, bpftrace, defer, ethtool, \ - fd_read_timeout, ip, rand_port, tool, wait_port_listen, wait_file + fd_read_timeout, ip, rand_port, wait_port_listen, wait_file from net.lib.py import KsftSkipEx, KsftFailEx, KsftXfailEx from net.lib.py import ksft_disruptive, ksft_exit, ksft_pr, ksft_run, \ ksft_setup @@ -34,7 +34,7 @@ KSFT_DIR = (Path(__file__).parent / "../../../..").resolve() "NlError", "RtnlFamily", "DevlinkFamily", "PSPFamily", "CmdExitFailure", "bkg", "cmd", "bpftool", "bpftrace", "defer", "ethtool", - "fd_read_timeout", "ip", "rand_port", "tool", + "fd_read_timeout", "ip", "rand_port", "wait_port_listen", "wait_file", "KsftSkipEx", "KsftFailEx", "KsftXfailEx", "ksft_disruptive", "ksft_exit", "ksft_pr", "ksft_run", diff --git a/tools/testing/selftests/net/lib/py/__init__.py b/tools/testing/selftests/net/lib/py/__init__.py index 997b85cc216a..97b7cf2b20eb 100644 --- a/tools/testing/selftests/net/lib/py/__init__.py +++ b/tools/testing/selftests/net/lib/py/__init__.py @@ -1,9 +1,32 @@ # SPDX-License-Identifier: GPL-2.0 +""" +Python selftest helpers for netdev. +""" + from .consts import KSRC -from .ksft import * +from .ksft import KsftFailEx, KsftSkipEx, KsftXfailEx, ksft_pr, ksft_eq, \ + ksft_ne, ksft_true, ksft_not_none, ksft_in, ksft_not_in, ksft_is, \ + ksft_ge, ksft_gt, ksft_lt, ksft_raises, ksft_busy_wait, \ + ktap_result, ksft_disruptive, ksft_setup, ksft_run, ksft_exit from .netns import NetNS, NetNSEnter -from .nsim import * -from .utils import * +from .nsim import NetdevSim, NetdevSimDev +from .utils import CmdExitFailure, fd_read_timeout, cmd, bkg, defer, \ + bpftool, ip, ethtool, bpftrace, rand_port, wait_port_listen, wait_file from .ynl import NlError, YnlFamily, EthtoolFamily, NetdevFamily, RtnlFamily, RtnlAddrFamily from .ynl import NetshaperFamily, DevlinkFamily, PSPFamily + +__all__ = ["KSRC", + "KsftFailEx", "KsftSkipEx", "KsftXfailEx", "ksft_pr", "ksft_eq", + "ksft_ne", "ksft_true", "ksft_not_none", "ksft_in", "ksft_not_in", + "ksft_is", "ksft_ge", "ksft_gt", "ksft_lt", "ksft_raises", + "ksft_busy_wait", "ktap_result", "ksft_disruptive", "ksft_setup", + "ksft_run", "ksft_exit", + "NetNS", "NetNSEnter", + "CmdExitFailure", "fd_read_timeout", "cmd", "bkg", "defer", + "bpftool", "ip", "ethtool", "bpftrace", "rand_port", + "wait_port_listen", "wait_file", + "NetdevSim", "NetdevSimDev", + "NetshaperFamily", "DevlinkFamily", "PSPFamily", "NlError", + "YnlFamily", "EthtoolFamily", "NetdevFamily", "RtnlFamily", + "RtnlAddrFamily"] -- 2.51.0

2 months, 2 weeks

3
2
0 0

[PATCH v3 0/5] tracing: fprobe: list-style filters,

by Ryan Chung

This series aims to extend fprobe with list-style filters and a clear entry/exist qualifier. Users can now specify a comma-separated symbol list with ! exclusions, and use a spec-level suffix to select probe type: - funcA*, !funcAB, funcC -> entry probes - funcA*, !funcAB, funcC:entry -> explicit entry - funcA*, !funcAB, funcC:exit -> return/exit across the whole list For compatibility, %return remains supported for single, literal symbols. When a list or wildcard is used, an explicit [GROUP/EVENT is required and autogeneration is disabled. Autogen names are kept for single-symbol specs, with wildcard sanitization. For list/wildcard forms we set ctx->funcname = NULL so BTF lookups are not attempted. The series moves parsing to the parse path, documents the new syntax, and adds selftests that accept valid list cases and reject empty tokens, stray commas, and %return mixed with lists or wildcards. Selftests also verify enable/disable flow and that entry+exit on the same set do not double-count attached functions. Help wanted: This is my first time contributing ftrace selftests. I would appreciate comments and recommendations on test structure and coverage. Basic coverage is included, but this likely needs broader testing across architectures. Feedback and additional test ideas are welcome. Changes since v2: - Introduce spec-level: :entry/:exit; reject %return with lists/wildcards - Require explict [GROUP/]EVENT for list/wildcard; keep autogen only for single literal. - Sanitize autogen names for single-symbol wildcards - Set ctx->funcname = NULL for list/wildcard to bypass BTF - Move list parsing out of __register_trace_fprobe() and into the parse path - Update docs and tracefs README and add dynevent selftests for accept/reject and enable/disable flow Link: https://lore.kernel.org/lkml/20250904103219.f4937968362bfff1ecd3f004@kernel… Ryan Chung (5): docs: tracing: fprobe: document list filters and :entry/:exit tracing: fprobe: require explicit [GROUP/]EVENT for list/wildcard tracing: fprobe: support comma-separated symbols and :entry/:exit selftests/ftrace: dynevent: add reject cases for list/:entry/:exit selftests/ftrace: dynevent: add reject cases Documentation/trace/fprobetrace.rst | 27 +- kernel/trace/trace.c | 3 +- kernel/trace/trace_fprobe.c | 247 ++++++++++++++---- .../test.d/dynevent/add_remove_fprobe.tc | 121 +++++++++ .../test.d/dynevent/fprobe_syntax_errors.tc | 13 + 5 files changed, 349 insertions(+), 62 deletions(-) -- 2.43.0

2 months, 2 weeks

3
15
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror October 2025