October 2025 - Linux-kselftest-mirror

[PATCH v22 00/28] riscv control-flow integrity for usermode

by Deepak Gupta via B4 Relay

v22: fixing build error due to -march=zicfiss being picked in gcc-13 and above but not actually doing any codegen or recognizing instruction for zicfiss. Change in v22 makes dependence on `-fcf-protection=full` compiler flag to ensure that toolchain has support and then only CONFIG_RISCV_USER_CFI will be visible in menuconfig. v21: fixed build errors. Basics and overview =================== Software with larger attack surfaces (e.g. network facing apps like databases, browsers or apps relying on browser runtimes) suffer from memory corruption issues which can be utilized by attackers to bend control flow of the program to eventually gain control (by making their payload executable). Attackers are able to perform such attacks by leveraging call-sites which rely on indirect calls or return sites which rely on obtaining return address from stack memory. To mitigate such attacks, risc-v extension zicfilp enforces that all indirect calls must land on a landing pad instruction `lpad` else cpu will raise software check exception (a new cpu exception cause code on riscv). Similarly for return flow, risc-v extension zicfiss extends architecture with - `sspush` instruction to push return address on a shadow stack - `sspopchk` instruction to pop return address from shadow stack and compare with input operand (i.e. return address on stack) - `sspopchk` to raise software check exception if comparision above was a mismatch - Protection mechanism using which shadow stack is not writeable via regular store instructions More information an details can be found at extensions github repo [1]. Equivalent to landing pad (zicfilp) on x86 is `ENDBRANCH` instruction in Intel CET [3] and branch target identification (BTI) [4] on arm. Similarly x86's Intel CET has shadow stack [5] and arm64 has guarded control stack (GCS) [6] which are very similar to risc-v's zicfiss shadow stack. x86 and arm64 support for user mode shadow stack is already in mainline. Kernel awareness for user control flow integrity ================================================ This series picks up Samuel Holland's envcfg changes [2] as well. So if those are being applied independently, they should be removed from this series. Enabling: In order to maintain compatibility and not break anything in user mode, kernel doesn't enable control flow integrity cpu extensions on binary by default. Instead exposes a prctl interface to enable, disable and lock the shadow stack or landing pad feature for a task. This allows userspace (loader) to enumerate if all objects in its address space are compiled with shadow stack and landing pad support and accordingly enable the feature. Additionally if a subsequent `dlopen` happens on a library, user mode can take a decision again to disable the feature (if incoming library is not compiled with support) OR terminate the task (if user mode policy is strict to have all objects in address space to be compiled with control flow integirty cpu feature). prctl to enable shadow stack results in allocating shadow stack from virtual memory and activating for user address space. x86 and arm64 are also following same direction due to similar reason(s). clone/fork: On clone and fork, cfi state for task is inherited by child. Shadow stack is part of virtual memory and is a writeable memory from kernel perspective (writeable via a restricted set of instructions aka shadow stack instructions) Thus kernel changes ensure that this memory is converted into read-only when fork/clone happens and COWed when fault is taken due to sspush, sspopchk or ssamoswap. In case `CLONE_VM` is specified and shadow stack is to be enabled, kernel will automatically allocate a shadow stack for that clone call. map_shadow_stack: x86 introduced `map_shadow_stack` system call to allow user space to explicitly map shadow stack memory in its address space. It is useful to allocate shadow for different contexts managed by a single thread (green threads or contexts) risc-v implements this system call as well. signal management: If shadow stack is enabled for a task, kernel performs an asynchronous control flow diversion to deliver the signal and eventually expects userspace to issue sigreturn so that original execution can be resumed. Even though resume context is prepared by kernel, it is in user space memory and is subject to memory corruption and corruption bugs can be utilized by attacker in this race window to perform arbitrary sigreturn and eventually bypass cfi mechanism. Another issue is how to ensure that cfi related state on sigcontext area is not trampled by legacy apps or apps compiled with old kernel headers. In order to mitigate control-flow hijacting, kernel prepares a token and place it on shadow stack before signal delivery and places address of token in sigcontext structure. During sigreturn, kernel obtains address of token from sigcontext struture, reads token from shadow stack and validates it and only then allow sigreturn to succeed. Compatiblity issue is solved by adopting dynamic sigcontext management introduced for vector extension. This series re-factor the code little bit to allow future sigcontext management easy (as proposed by Andy Chiu from SiFive) config and compilation: Introduce a new risc-v config option `CONFIG_RISCV_USER_CFI`. Selecting this config option picks the kernel support for user control flow integrity. This optin is presented only if toolchain has shadow stack and landing pad support. And is on purpose guarded by toolchain support. Reason being that eventually vDSO also needs to be compiled in with shadow stack and landing pad support. vDSO compile patches are not included as of now because landing pad labeling scheme is yet to settle for usermode runtime. To get more information on kernel interactions with respect to zicfilp and zicfiss, patch series adds documentation for `zicfilp` and `zicfiss` in following: Documentation/arch/riscv/zicfiss.rst Documentation/arch/riscv/zicfilp.rst How to test this series ======================= Toolchain --------- $ git clone git@github.com:sifive/riscv-gnu-toolchain.git -b cfi-dev $ riscv-gnu-toolchain/configure --prefix=<path-to-where-to-build> --with-arch=rv64gc_zicfilp_zicfiss --enable-linux --disable-gdb --with-extra-multilib-test="rv64gc_zicfilp_zicfiss-lp64d:-static" $ make -j$(nproc) Qemu ---- Get the lastest qemu $ cd qemu $ mkdir build $ cd build $ ../configure --target-list=riscv64-softmmu $ make -j$(nproc) Opensbi ------- $ git clone git@github.com:deepak0414/opensbi.git -b v6_cfi_spec_split_opensbi $ make CROSS_COMPILE=<your riscv toolchain> -j$(nproc) PLATFORM=generic Linux ----- Running defconfig is fine. CFI is enabled by default if the toolchain supports it. $ make ARCH=riscv CROSS_COMPILE=<path-to-cfi-riscv-gnu-toolchain>/build/bin/riscv64-unknown-linux-gnu- -j$(nproc) defconfig $ make ARCH=riscv CROSS_COMPILE=<path-to-cfi-riscv-gnu-toolchain>/build/bin/riscv64-unknown-linux-gnu- -j$(nproc) Running ------- Modify your qemu command to have: -bios <path-to-cfi-opensbi>/build/platform/generic/firmware/fw_dynamic.bin -cpu rv64,zicfilp=true,zicfiss=true,zimop=true,zcmop=true References ========== [1] - https://github.com/riscv/riscv-cfi [2] - https://lore.kernel.org/all/20240814081126.956287-1-samuel.holland@sifive.c… [3] - https://lwn.net/Articles/889475/ [4] - https://developer.arm.com/documentation/109576/0100/Branch-Target-Identific… [5] - https://www.intel.com/content/dam/develop/external/us/en/documents/catc17-i… [6] - https://lwn.net/Articles/940403/ To: Thomas Gleixner <tglx(a)linutronix.de> To: Ingo Molnar <mingo(a)redhat.com> To: Borislav Petkov <bp(a)alien8.de> To: Dave Hansen <dave.hansen(a)linux.intel.com> To: x86(a)kernel.org To: H. Peter Anvin <hpa(a)zytor.com> To: Andrew Morton <akpm(a)linux-foundation.org> To: Liam R. Howlett <Liam.Howlett(a)oracle.com> To: Vlastimil Babka <vbabka(a)suse.cz> To: Lorenzo Stoakes <lorenzo.stoakes(a)oracle.com> To: Paul Walmsley <paul.walmsley(a)sifive.com> To: Palmer Dabbelt <palmer(a)dabbelt.com> To: Albert Ou <aou(a)eecs.berkeley.edu> To: Conor Dooley <conor(a)kernel.org> To: Rob Herring <robh(a)kernel.org> To: Krzysztof Kozlowski <krzk+dt(a)kernel.org> To: Arnd Bergmann <arnd(a)arndb.de> To: Christian Brauner <brauner(a)kernel.org> To: Peter Zijlstra <peterz(a)infradead.org> To: Oleg Nesterov <oleg(a)redhat.com> To: Eric Biederman <ebiederm(a)xmission.com> To: Kees Cook <kees(a)kernel.org> To: Jonathan Corbet <corbet(a)lwn.net> To: Shuah Khan <shuah(a)kernel.org> To: Jann Horn <jannh(a)google.com> To: Conor Dooley <conor+dt(a)kernel.org> To: Miguel Ojeda <ojeda(a)kernel.org> To: Alex Gaynor <alex.gaynor(a)gmail.com> To: Boqun Feng <boqun.feng(a)gmail.com> To: Gary Guo <gary(a)garyguo.net> To: Björn Roy Baron <bjorn3_gh(a)protonmail.com> To: Benno Lossin <benno.lossin(a)proton.me> To: Andreas Hindborg <a.hindborg(a)kernel.org> To: Alice Ryhl <aliceryhl(a)google.com> To: Trevor Gross <tmgross(a)umich.edu> Cc: linux-kernel(a)vger.kernel.org Cc: linux-fsdevel(a)vger.kernel.org Cc: linux-mm(a)kvack.org Cc: linux-riscv(a)lists.infradead.org Cc: devicetree(a)vger.kernel.org Cc: linux-arch(a)vger.kernel.org Cc: linux-doc(a)vger.kernel.org Cc: linux-kselftest(a)vger.kernel.org Cc: alistair.francis(a)wdc.com Cc: richard.henderson(a)linaro.org Cc: jim.shu(a)sifive.com Cc: andybnac(a)gmail.com Cc: kito.cheng(a)sifive.com Cc: charlie(a)rivosinc.com Cc: atishp(a)rivosinc.com Cc: evan(a)rivosinc.com Cc: cleger(a)rivosinc.com Cc: alexghiti(a)rivosinc.com Cc: samitolvanen(a)google.com Cc: broonie(a)kernel.org Cc: rick.p.edgecombe(a)intel.com Cc: rust-for-linux(a)vger.kernel.org changelog --------- v22: - CONFIG_RISCV_USER_CFI was by default "n". With dual vdso support it is default "y" (if toolchain supports it). Fixing build error due to "-march=zicfiss" being picked in gcc-13 partially. gcc-13 only recognizes the flag but not actually doing any codegen or recognizing instruction for zicfiss. Change in v22 makes dependence on `-fcf-protection=full` compiler flag to ensure that toolchain has support and then only CONFIG_RISCV_USER_CFI will be visible in menuconfig. - picked up tags and some cosmetic changes in commit message for dual vdso patch. v21: - Fixing build errors due to changes in arch/riscv/include/asm/vdso.h Using #ifdef instead of IS_ENABLED in arch/riscv/include/asm/vdso.h vdso-cfi-offsets.h should be included only when CONFIG_RISCV_USER_CFI is selected. v20: - rebased on v6.18-rc1. - Added two vDSO support. If `CONFIG_RISCV_USER_CFI` is selected two vDSOs are compiled (one for hardware prior to RVA23 and one for RVA23 onwards). Kernel exposes RVA23 vDSO if hardware/cpu implements zimop else exposes existing vDSO to userspace. - default selection for `CONFIG_RISCV_USER_CFI` is "Yes". - replaced "__ASSEMBLY__" with "__ASSEMBLER__" v19: - riscv_nousercfi was `int`. changed it to unsigned long. Thanks to Alex Ghiti for reporting it. It was a bug. - ELP is cleared on trap entry only when CONFIG_64BIT. - restore ssp back on return to usermode was being done before `riscv_v_context_nesting_end` on trap exit path. If kernel shadow stack were enabled this would result in kernel operating on user shadow stack and panic (as I found in my testing of kcfi patch series). So fixed that. v18: - rebased on 6.16-rc1 - uprobe handling clears ELP in sstatus image in pt_regs - vdso was missing shadow stack elf note for object files. added that. Additional asm file for vdso needed the elf marker flag. toolchain should complain if `-fcf-protection=full` and marker is missing for object generated from asm file. Asked toolchain folks to fix this. Although no reason to gate the merge on that. - Split up compile options for march and fcf-protection in vdso Makefile - CONFIG_RISCV_USER_CFI option is moved under "Kernel features" menu Added `arch/riscv/configs/hardening.config` fragment which selects CONFIG_RISCV_USER_CFI v17: - fixed warnings due to empty macros in usercfi.h (reported by alexg) - fixed prefixes in commit titles reported by alexg - took below uprobe with fcfi v2 patch from Zong Li and squashed it with "riscv/traps: Introduce software check exception and uprobe handling" https://lore.kernel.org/all/20250604093403.10916-1-zong.li@sifive.com/ v16: - If FWFT is not implemented or returns error for shadow stack activation, then no_usercfi is set to disable shadow stack. Although this should be picked up by extension validation and activation. Fixed this bug for zicfilp and zicfiss both. Thanks to Charlie Jenkins for reporting this. - If toolchain doesn't support cfi, cfi kselftest shouldn't build. Suggested by Charlie Jenkins. - Default for CONFIG_RISCV_USER_CFI is set to no. Charlie/Atish suggested to keep it off till we have more hardware availibility with RVA23 profile and zimop/zcmop implemented. Else this will start breaking people's workflow - Includes the fix if "!RV64 and !SBI" then definitions for FWFT in asm-offsets.c error. v15: - Toolchain has been updated to include `-fcf-protection` flag. This exists for x86 as well. Updated kernel patches to compile vDSO and selftest to compile with `fcf-protection=full` flag. - selecting CONFIG_RISCV_USERCFI selects CONFIG_RISCV_SBI. - Patch to enable shadow stack for kernel wasn't hidden behind CONFIG_RISCV_USERCFI and CONFIG_RISCV_SBI. fixed that. v14: - rebased on top of palmer/sbi-v3. Thus dropped clement's FWFT patches Updated RISCV_ISA_EXT_XXXX in hwcap and hwprobe constants. - Took Radim's suggestions on bitfields. - Placed cfi_state at the end of thread_info block so that current situation is not disturbed with respect to member fields of thread_info in single cacheline. v13: - cpu_supports_shadow_stack/cpu_supports_indirect_br_lp_instr uses riscv_has_extension_unlikely() - uses nops(count) to create nop slide - RISCV_ACQUIRE_BARRIER is not needed in `amo_user_shstk`. Removed it - changed ternaries to simply use implicit casting to convert to bool. - kernel command line allows to disable zicfilp and zicfiss independently. updated kernel-parameters.txt. - ptrace user abi for cfi uses bitmasks instead of bitfields. Added ptrace kselftest. - cosmetic and grammatical changes to documentation. v12: - It seems like I had accidently squashed arch agnostic indirect branch tracking prctl and riscv implementation of those prctls. Split them again. - set_shstk_status/set_indir_lp_status perform CSR writes only when CPU support is available. As suggested by Zong Li. - Some minor clean up in kselftests as suggested by Zong Li. v11: - patch "arch/riscv: compile vdso with landing pad" was unconditionally selecting `_zicfilp` for vDSO compile. fixed that. Changed `lpad 1` to to `lpad 0`. v10: - dropped "mm: helper `is_shadow_stack_vma` to check shadow stack vma". This patch is not that interesting to this patch series for risc-v. There are instances in arch directories where VM_SHADOW_STACK flag is anyways used. Dropping this patch to expedite merging in riscv tree. - Took suggestions from `Clement` on "riscv: zicfiss / zicfilp enumeration" to validate presence of cfi based on config. - Added a patch for vDSO to have `lpad 0`. I had omitted this earlier to make sure we add single vdso object with cfi enabled. But a vdso object with scheme of zero labeled landing pad is least common denominator and should work with all objects of zero labeled as well as function-signature labeled objects. v9: - rebased on master (39a803b754d5 fix braino in "9p: fix ->rename_sem exclusion") - dropped "mm: Introduce ARCH_HAS_USER_SHADOW_STACK" (master has it from arm64/gcs) - dropped "prctl: arch-agnostic prctl for shadow stack" (master has it from arm64/gcs) v8: - rebased on palmer/for-next - dropped samuel holland's `envcfg` context switch patches. they are in parlmer/for-next v7: - Removed "riscv/Kconfig: enable HAVE_EXIT_THREAD for riscv" Instead using `deactivate_mm` flow to clean up. see here for more context https://lore.kernel.org/all/20230908203655.543765-1-rick.p.edgecombe@intel.… - Changed the header include in `kselftest`. Hopefully this fixes compile issue faced by Zong Li at SiFive. - Cleaned up an orphaned change to `mm/mmap.c` in below patch "riscv/mm : ensure PROT_WRITE leads to VM_READ | VM_WRITE" - Lock interfaces for shadow stack and indirect branch tracking expect arg == 0 Any future evolution of this interface should accordingly define how arg should be setup. - `mm/map.c` has an instance of using `VM_SHADOW_STACK`. Fixed it to use helper `is_shadow_stack_vma`. - Link to v6: https://lore.kernel.org/r/20241008-v5_user_cfi_series-v6-0-60d9fe073f37@riv… v6: - Picked up Samuel Holland's changes as is with `envcfg` placed in `thread` instead of `thread_info` - fixed unaligned newline escapes in kselftest - cleaned up messages in kselftest and included test output in commit message - fixed a bug in clone path reported by Zong Li - fixed a build issue if CONFIG_RISCV_ISA_V is not selected (this was introduced due to re-factoring signal context management code) v5: - rebased on v6.12-rc1 - Fixed schema related issues in device tree file - Fixed some of the documentation related issues in zicfilp/ss.rst (style issues and added index) - added `SHADOW_STACK_SET_MARKER` so that implementation can define base of shadow stack. - Fixed warnings on definitions added in usercfi.h when CONFIG_RISCV_USER_CFI is not selected. - Adopted context header based signal handling as proposed by Andy Chiu - Added support for enabling kernel mode access to shadow stack using FWFT (https://github.com/riscv-non-isa/riscv-sbi-doc/blob/master/src/ext-firmware…) - Link to v5: https://lore.kernel.org/r/20241001-v5_user_cfi_series-v1-0-3ba65b6e550f@riv… (Note: I had an issue in my workflow due to which version number wasn't picked up correctly while sending out patches) v4: - rebased on 6.11-rc6 - envcfg: Converged with Samuel Holland's patches for envcfg management on per- thread basis. - vma_is_shadow_stack is renamed to is_vma_shadow_stack - picked up Mark Brown's `ARCH_HAS_USER_SHADOW_STACK` patch - signal context: using extended context management to maintain compatibility. - fixed `-Wmissing-prototypes` compiler warnings for prctl functions - Documentation fixes and amending typos. - Link to v4: https://lore.kernel.org/all/20240912231650.3740732-1-debug@rivosinc.com/ v3: - envcfg logic to pick up base envcfg had a bug where `ENVCFG_CBZE` could have been picked on per task basis, even though CPU didn't implement it. Fixed in this series. - dt-bindings As suggested, split into separate commit. fixed the messaging that spec is in public review - arch_is_shadow_stack change arch_is_shadow_stack changed to vma_is_shadow_stack - hwprobe zicfiss / zicfilp if present will get enumerated in hwprobe - selftests As suggested, added object and binary filenames to .gitignore Selftest binary anyways need to be compiled with cfi enabled compiler which will make sure that landing pad and shadow stack are enabled. Thus removed separate enable/disable tests. Cleaned up tests a bit. - Link to v3: https://lore.kernel.org/lkml/20240403234054.2020347-1-debug@rivosinc.com/ v2: - Using config `CONFIG_RISCV_USER_CFI`, kernel support for riscv control flow integrity for user mode programs can be compiled in the kernel. - Enabling of control flow integrity for user programs is left to user runtime - This patch series introduces arch agnostic `prctls` to enable shadow stack and indirect branch tracking. And implements them on riscv. --- Changes in v22: - Link to v21: https://lore.kernel.org/r/20251015-v5_user_cfi_series-v21-0-6a07856e90e7@ri… Changes in v21: - Link to v20: https://lore.kernel.org/r/20251013-v5_user_cfi_series-v20-0-b9de4be9912e@ri… Changes in v20: - Link to v19: https://lore.kernel.org/r/20250731-v5_user_cfi_series-v19-0-09b468d7beab@ri… Changes in v19: - Link to v18: https://lore.kernel.org/r/20250711-v5_user_cfi_series-v18-0-a8ee62f9f38e@ri… Changes in v18: - Link to v17: https://lore.kernel.org/r/20250604-v5_user_cfi_series-v17-0-4565c2cf869f@ri… Changes in v17: - Link to v16: https://lore.kernel.org/r/20250522-v5_user_cfi_series-v16-0-64f61a35eee7@ri… Changes in v16: - Link to v15: https://lore.kernel.org/r/20250502-v5_user_cfi_series-v15-0-914966471885@ri… Changes in v15: - changelog posted just below cover letter - Link to v14: https://lore.kernel.org/r/20250429-v5_user_cfi_series-v14-0-5239410d012a@ri… Changes in v14: - changelog posted just below cover letter - Link to v13: https://lore.kernel.org/r/20250424-v5_user_cfi_series-v13-0-971437de586a@ri… Changes in v13: - changelog posted just below cover letter - Link to v12: https://lore.kernel.org/r/20250314-v5_user_cfi_series-v12-0-e51202b53138@ri… Changes in v12: - changelog posted just below cover letter - Link to v11: https://lore.kernel.org/r/20250310-v5_user_cfi_series-v11-0-86b36cbfb910@ri… Changes in v11: - changelog posted just below cover letter - Link to v10: https://lore.kernel.org/r/20250210-v5_user_cfi_series-v10-0-163dcfa31c60@ri… --- Andy Chiu (1): riscv: signal: abstract header saving for setup_sigcontext Deepak Gupta (26): mm: VM_SHADOW_STACK definition for riscv dt-bindings: riscv: zicfilp and zicfiss in dt-bindings (extensions.yaml) riscv: zicfiss / zicfilp enumeration riscv: zicfiss / zicfilp extension csr and bit definitions riscv: usercfi state for task and save/restore of CSR_SSP on trap entry/exit riscv/mm : ensure PROT_WRITE leads to VM_READ | VM_WRITE riscv/mm: manufacture shadow stack pte riscv/mm: teach pte_mkwrite to manufacture shadow stack PTEs riscv/mm: write protect and shadow stack riscv/mm: Implement map_shadow_stack() syscall riscv/shstk: If needed allocate a new shadow stack on clone riscv: Implements arch agnostic shadow stack prctls prctl: arch-agnostic prctl for indirect branch tracking riscv: Implements arch agnostic indirect branch tracking prctls riscv/traps: Introduce software check exception and uprobe handling riscv/signal: save and restore of shadow stack for signal riscv/kernel: update __show_regs to print shadow stack register riscv/ptrace: riscv cfi status and state via ptrace and in core files riscv/hwprobe: zicfilp / zicfiss enumeration in hwprobe riscv: kernel command line option to opt out of user cfi riscv: enable kernel access to shadow stack memory via FWFT sbi call arch/riscv: dual vdso creation logic and select vdso based on hw riscv: create a config for shadow stack and landing pad instr support riscv: Documentation for landing pad / indirect branch tracking riscv: Documentation for shadow stack on riscv kselftest/riscv: kselftest for user mode cfi Jim Shu (1): arch/riscv: compile vdso with landing pad and shadow stack note Documentation/admin-guide/kernel-parameters.txt | 8 + Documentation/arch/riscv/index.rst | 2 + Documentation/arch/riscv/zicfilp.rst | 115 +++++ Documentation/arch/riscv/zicfiss.rst | 179 +++++++ .../devicetree/bindings/riscv/extensions.yaml | 14 + arch/riscv/Kconfig | 22 + arch/riscv/Makefile | 8 +- arch/riscv/configs/hardening.config | 4 + arch/riscv/include/asm/asm-prototypes.h | 1 + arch/riscv/include/asm/assembler.h | 44 ++ arch/riscv/include/asm/cpufeature.h | 12 + arch/riscv/include/asm/csr.h | 16 + arch/riscv/include/asm/entry-common.h | 2 + arch/riscv/include/asm/hwcap.h | 2 + arch/riscv/include/asm/mman.h | 26 + arch/riscv/include/asm/mmu_context.h | 7 + arch/riscv/include/asm/pgtable.h | 30 +- arch/riscv/include/asm/processor.h | 1 + arch/riscv/include/asm/thread_info.h | 3 + arch/riscv/include/asm/usercfi.h | 95 ++++ arch/riscv/include/asm/vdso.h | 13 +- arch/riscv/include/asm/vector.h | 3 + arch/riscv/include/uapi/asm/hwprobe.h | 2 + arch/riscv/include/uapi/asm/ptrace.h | 34 ++ arch/riscv/include/uapi/asm/sigcontext.h | 1 + arch/riscv/kernel/Makefile | 2 + arch/riscv/kernel/asm-offsets.c | 10 + arch/riscv/kernel/cpufeature.c | 27 + arch/riscv/kernel/entry.S | 38 ++ arch/riscv/kernel/head.S | 27 + arch/riscv/kernel/process.c | 27 +- arch/riscv/kernel/ptrace.c | 95 ++++ arch/riscv/kernel/signal.c | 148 +++++- arch/riscv/kernel/sys_hwprobe.c | 2 + arch/riscv/kernel/sys_riscv.c | 10 + arch/riscv/kernel/traps.c | 54 ++ arch/riscv/kernel/usercfi.c | 545 +++++++++++++++++++++ arch/riscv/kernel/vdso.c | 7 + arch/riscv/kernel/vdso/Makefile | 40 +- arch/riscv/kernel/vdso/flush_icache.S | 4 + arch/riscv/kernel/vdso/gen_vdso_offsets.sh | 4 +- arch/riscv/kernel/vdso/getcpu.S | 4 + arch/riscv/kernel/vdso/note.S | 3 + arch/riscv/kernel/vdso/rt_sigreturn.S | 4 + arch/riscv/kernel/vdso/sys_hwprobe.S | 4 + arch/riscv/kernel/vdso/vgetrandom-chacha.S | 5 +- arch/riscv/kernel/vdso_cfi/Makefile | 25 + arch/riscv/kernel/vdso_cfi/vdso-cfi.S | 11 + arch/riscv/mm/init.c | 2 +- arch/riscv/mm/pgtable.c | 16 + include/linux/cpu.h | 4 + include/linux/mm.h | 7 + include/uapi/linux/elf.h | 2 + include/uapi/linux/prctl.h | 27 + kernel/sys.c | 30 ++ tools/testing/selftests/riscv/Makefile | 2 +- tools/testing/selftests/riscv/cfi/.gitignore | 3 + tools/testing/selftests/riscv/cfi/Makefile | 16 + tools/testing/selftests/riscv/cfi/cfi_rv_test.h | 82 ++++ tools/testing/selftests/riscv/cfi/riscv_cfi_test.c | 173 +++++++ tools/testing/selftests/riscv/cfi/shadowstack.c | 385 +++++++++++++++ tools/testing/selftests/riscv/cfi/shadowstack.h | 27 + 62 files changed, 2475 insertions(+), 41 deletions(-) --- base-commit: 3a8660878839faadb4f1a6dd72c3179c1df56787 change-id: 20240930-v5_user_cfi_series-3dc332f8f5b2 -- - debug

3 hours, 8 minutes

5
33
0 0

[PATCH v12] exec: Fix dead-lock in de_thread with ptrace_attach

by Bernd Edlinger

This introduces signal->exec_bprm, which is used to fix the case when at least one of the sibling threads is traced, and therefore the trace process may dead-lock in ptrace_attach, but de_thread will need to wait for the tracer to continue execution. The solution is to detect this situation and allow ptrace_attach to continue by temporarily releasing the cred_guard_mutex, while de_thread() is still waiting for traced zombies to be eventually released by the tracer. In the case of the thread group leader we only have to wait for the thread to become a zombie, which may also need co-operation from the tracer due to PTRACE_O_TRACEEXIT. When a tracer wants to ptrace_attach a task that already is in execve, we simply retry the ptrace_may_access check while temporarily installing the new credentials and dumpability which are about to be used after execve completes. If the ptrace_attach happens on a thread that is a sibling-thread of the thread doing execve, it is sufficient to check against the old credentials, as this thread will be waited for, before the new credentials are installed. Other threads die quickly since the cred_guard_mutex is released, but a deadly signal is already pending. In case the mutex_lock_killable misses the signal, the non-zero current->signal->exec_bprm makes sure they release the mutex immediately and return with -ERESTARTNOINTR. This means there is no API change, unlike the previous version of this patch which was discussed here: https://lore.kernel.org/lkml/b6537ae6-31b1-5c50-f32b-8b8332ace882@hotmail.d… See tools/testing/selftests/ptrace/vmaccess.c for a test case that gets fixed by this change. Note that since the test case was originally designed to test the ptrace_attach returning an error in this situation, the test expectation needed to be adjusted, to allow the API to succeed at the first attempt. Signed-off-by: Bernd Edlinger <bernd.edlinger(a)hotmail.de> --- fs/exec.c | 69 ++++++++++++++++------- fs/proc/base.c | 6 ++ include/linux/cred.h | 1 + include/linux/sched/signal.h | 18 ++++++ kernel/cred.c | 28 +++++++-- kernel/ptrace.c | 32 +++++++++++ kernel/seccomp.c | 12 +++- tools/testing/selftests/ptrace/vmaccess.c | 23 +++++--- 8 files changed, 155 insertions(+), 34 deletions(-) v10: Changes to previous version, make the PTRACE_ATTACH retun -EAGAIN, instead of execve return -ERESTARTSYS. Added some lessions learned to the description. v11: Check old and new credentials in PTRACE_ATTACH again without changing the API. Note: I got actually one response from an automatic checker to the v11 patch, https://lore.kernel.org/lkml/202107121344.wu68hEPF-lkp@intel.com/ which is complaining about: >> kernel/ptrace.c:425:26: sparse: sparse: incorrect type in assignment (different address spaces) @@ expected struct cred const *old_cred @@ got struct cred const [noderef] __rcu *real_cred @@ 417 struct linux_binprm *bprm = task->signal->exec_bprm; 418 const struct cred *old_cred; 419 struct mm_struct *old_mm; 420 421 retval = down_write_killable(&task->signal->exec_update_lock); 422 if (retval) 423 goto unlock_creds; 424 task_lock(task); > 425 old_cred = task->real_cred; v12: Essentially identical to v11. - Fixed a minor merge conflict in linux v5.17, and fixed the above mentioned nit by adding __rcu to the declaration. - re-tested the patch with all linux versions from v5.11 to v6.6 v10 was an alternative approach which did imply an API change. But I would prefer to avoid such an API change. The difficult part is getting the right dumpability flags assigned before de_thread starts, hope you like this version. If not, the v10 is of course also acceptable. Thanks Bernd. diff --git a/fs/exec.c b/fs/exec.c index 2f2b0acec4f0..902d3b230485 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -1041,11 +1041,13 @@ static int exec_mmap(struct mm_struct *mm) return 0; } -static int de_thread(struct task_struct *tsk) +static int de_thread(struct task_struct *tsk, struct linux_binprm *bprm) { struct signal_struct *sig = tsk->signal; struct sighand_struct *oldsighand = tsk->sighand; spinlock_t *lock = &oldsighand->siglock; + struct task_struct *t = tsk; + bool unsafe_execve_in_progress = false; if (thread_group_empty(tsk)) goto no_thread_group; @@ -1068,6 +1070,19 @@ static int de_thread(struct task_struct *tsk) if (!thread_group_leader(tsk)) sig->notify_count--; + while_each_thread(tsk, t) { + if (unlikely(t->ptrace) + && (t != tsk->group_leader || !t->exit_state)) + unsafe_execve_in_progress = true; + } + + if (unlikely(unsafe_execve_in_progress)) { + spin_unlock_irq(lock); + sig->exec_bprm = bprm; + mutex_unlock(&sig->cred_guard_mutex); + spin_lock_irq(lock); + } + while (sig->notify_count) { __set_current_state(TASK_KILLABLE); spin_unlock_irq(lock); @@ -1158,6 +1173,11 @@ static int de_thread(struct task_struct *tsk) release_task(leader); } + if (unlikely(unsafe_execve_in_progress)) { + mutex_lock(&sig->cred_guard_mutex); + sig->exec_bprm = NULL; + } + sig->group_exec_task = NULL; sig->notify_count = 0; @@ -1169,6 +1189,11 @@ static int de_thread(struct task_struct *tsk) return 0; killed: + if (unlikely(unsafe_execve_in_progress)) { + mutex_lock(&sig->cred_guard_mutex); + sig->exec_bprm = NULL; + } + /* protects against exit_notify() and __exit_signal() */ read_lock(&tasklist_lock); sig->group_exec_task = NULL; @@ -1253,6 +1278,24 @@ int begin_new_exec(struct linux_binprm * bprm) if (retval) return retval; + /* If the binary is not readable then enforce mm->dumpable=0 */ + would_dump(bprm, bprm->file); + if (bprm->have_execfd) + would_dump(bprm, bprm->executable); + + /* + * Figure out dumpability. Note that this checking only of current + * is wrong, but userspace depends on it. This should be testing + * bprm->secureexec instead. + */ + if (bprm->interp_flags & BINPRM_FLAGS_ENFORCE_NONDUMP || + is_dumpability_changed(current_cred(), bprm->cred) || + !(uid_eq(current_euid(), current_uid()) && + gid_eq(current_egid(), current_gid()))) + set_dumpable(bprm->mm, suid_dumpable); + else + set_dumpable(bprm->mm, SUID_DUMP_USER); + /* * Ensure all future errors are fatal. */ @@ -1261,7 +1304,7 @@ int begin_new_exec(struct linux_binprm * bprm) /* * Make this the only thread in the thread group. */ - retval = de_thread(me); + retval = de_thread(me, bprm); if (retval) goto out; @@ -1284,11 +1327,6 @@ int begin_new_exec(struct linux_binprm * bprm) if (retval) goto out; - /* If the binary is not readable then enforce mm->dumpable=0 */ - would_dump(bprm, bprm->file); - if (bprm->have_execfd) - would_dump(bprm, bprm->executable); - /* * Release all of the old mmap stuff */ @@ -1350,18 +1388,6 @@ int begin_new_exec(struct linux_binprm * bprm) me->sas_ss_sp = me->sas_ss_size = 0; - /* - * Figure out dumpability. Note that this checking only of current - * is wrong, but userspace depends on it. This should be testing - * bprm->secureexec instead. - */ - if (bprm->interp_flags & BINPRM_FLAGS_ENFORCE_NONDUMP || - !(uid_eq(current_euid(), current_uid()) && - gid_eq(current_egid(), current_gid()))) - set_dumpable(current->mm, suid_dumpable); - else - set_dumpable(current->mm, SUID_DUMP_USER); - perf_event_exec(); __set_task_comm(me, kbasename(bprm->filename), true); @@ -1480,6 +1506,11 @@ static int prepare_bprm_creds(struct linux_binprm *bprm) if (mutex_lock_interruptible(&current->signal->cred_guard_mutex)) return -ERESTARTNOINTR; + if (unlikely(current->signal->exec_bprm)) { + mutex_unlock(&current->signal->cred_guard_mutex); + return -ERESTARTNOINTR; + } + bprm->cred = prepare_exec_creds(); if (likely(bprm->cred)) return 0; diff --git a/fs/proc/base.c b/fs/proc/base.c index ffd54617c354..0da9adfadb48 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -2788,6 +2788,12 @@ static ssize_t proc_pid_attr_write(struct file * file, const char __user * buf, if (rv < 0) goto out_free; + if (unlikely(current->signal->exec_bprm)) { + mutex_unlock(&current->signal->cred_guard_mutex); + rv = -ERESTARTNOINTR; + goto out_free; + } + rv = security_setprocattr(PROC_I(inode)->op.lsm, file->f_path.dentry->d_name.name, page, count); diff --git a/include/linux/cred.h b/include/linux/cred.h index f923528d5cc4..b01e309f5686 100644 --- a/include/linux/cred.h +++ b/include/linux/cred.h @@ -159,6 +159,7 @@ extern const struct cred *get_task_cred(struct task_struct *); extern struct cred *cred_alloc_blank(void); extern struct cred *prepare_creds(void); extern struct cred *prepare_exec_creds(void); +extern bool is_dumpability_changed(const struct cred *, const struct cred *); extern int commit_creds(struct cred *); extern void abort_creds(struct cred *); extern const struct cred *override_creds(const struct cred *); diff --git a/include/linux/sched/signal.h b/include/linux/sched/signal.h index 0014d3adaf84..14df7073a0a8 100644 --- a/include/linux/sched/signal.h +++ b/include/linux/sched/signal.h @@ -234,9 +234,27 @@ struct signal_struct { struct mm_struct *oom_mm; /* recorded mm when the thread group got * killed by the oom killer */ + struct linux_binprm *exec_bprm; /* Used to check ptrace_may_access + * against new credentials while + * de_thread is waiting for other + * traced threads to terminate. + * Set while de_thread is executing. + * The cred_guard_mutex is released + * after de_thread() has called + * zap_other_threads(), therefore + * a fatal signal is guaranteed to be + * already pending in the unlikely + * event, that + * current->signal->exec_bprm happens + * to be non-zero after the + * cred_guard_mutex was acquired. + */ + struct mutex cred_guard_mutex; /* guard against foreign influences on * credential calculations * (notably. ptrace) + * Held while execve runs, except when + * a sibling thread is being traced. * Deprecated do not use in new code. * Use exec_update_lock instead. */ diff --git a/kernel/cred.c b/kernel/cred.c index 98cb4eca23fb..586cb6c7cf6b 100644 --- a/kernel/cred.c +++ b/kernel/cred.c @@ -433,6 +433,28 @@ static bool cred_cap_issubset(const struct cred *set, const struct cred *subset) return false; } +/** + * is_dumpability_changed - Will changing creds from old to new + * affect the dumpability in commit_creds? + * + * Return: false - dumpability will not be changed in commit_creds. + * Return: true - dumpability will be changed to non-dumpable. + * + * @old: The old credentials + * @new: The new credentials + */ +bool is_dumpability_changed(const struct cred *old, const struct cred *new) +{ + if (!uid_eq(old->euid, new->euid) || + !gid_eq(old->egid, new->egid) || + !uid_eq(old->fsuid, new->fsuid) || + !gid_eq(old->fsgid, new->fsgid) || + !cred_cap_issubset(old, new)) + return true; + + return false; +} + /** * commit_creds - Install new credentials upon the current task * @new: The credentials to be assigned @@ -467,11 +489,7 @@ int commit_creds(struct cred *new) get_cred(new); /* we will require a ref for the subj creds too */ /* dumpability changes */ - if (!uid_eq(old->euid, new->euid) || - !gid_eq(old->egid, new->egid) || - !uid_eq(old->fsuid, new->fsuid) || - !gid_eq(old->fsgid, new->fsgid) || - !cred_cap_issubset(old, new)) { + if (is_dumpability_changed(old, new)) { if (task->mm) set_dumpable(task->mm, suid_dumpable); task->pdeath_signal = 0; diff --git a/kernel/ptrace.c b/kernel/ptrace.c index 443057bee87c..eb1c450bb7d7 100644 --- a/kernel/ptrace.c +++ b/kernel/ptrace.c @@ -20,6 +20,7 @@ #include <linux/pagemap.h> #include <linux/ptrace.h> #include <linux/security.h> +#include <linux/binfmts.h> #include <linux/signal.h> #include <linux/uio.h> #include <linux/audit.h> @@ -435,6 +436,28 @@ static int ptrace_attach(struct task_struct *task, long request, if (retval) goto unlock_creds; + if (unlikely(task->in_execve)) { + struct linux_binprm *bprm = task->signal->exec_bprm; + const struct cred __rcu *old_cred; + struct mm_struct *old_mm; + + retval = down_write_killable(&task->signal->exec_update_lock); + if (retval) + goto unlock_creds; + task_lock(task); + old_cred = task->real_cred; + old_mm = task->mm; + rcu_assign_pointer(task->real_cred, bprm->cred); + task->mm = bprm->mm; + retval = __ptrace_may_access(task, PTRACE_MODE_ATTACH_REALCREDS); + rcu_assign_pointer(task->real_cred, old_cred); + task->mm = old_mm; + task_unlock(task); + up_write(&task->signal->exec_update_lock); + if (retval) + goto unlock_creds; + } + write_lock_irq(&tasklist_lock); retval = -EPERM; if (unlikely(task->exit_state)) @@ -508,6 +531,14 @@ static int ptrace_traceme(void) { int ret = -EPERM; + if (mutex_lock_interruptible(&current->signal->cred_guard_mutex)) + return -ERESTARTNOINTR; + + if (unlikely(current->signal->exec_bprm)) { + mutex_unlock(&current->signal->cred_guard_mutex); + return -ERESTARTNOINTR; + } + write_lock_irq(&tasklist_lock); /* Are we already being traced? */ if (!current->ptrace) { @@ -523,6 +554,7 @@ static int ptrace_traceme(void) } } write_unlock_irq(&tasklist_lock); + mutex_unlock(&current->signal->cred_guard_mutex); return ret; } diff --git a/kernel/seccomp.c b/kernel/seccomp.c index 255999ba9190..b29bbfa0b044 100644 --- a/kernel/seccomp.c +++ b/kernel/seccomp.c @@ -1955,9 +1955,15 @@ static long seccomp_set_mode_filter(unsigned int flags, * Make sure we cannot change seccomp or nnp state via TSYNC * while another thread is in the middle of calling exec. */ - if (flags & SECCOMP_FILTER_FLAG_TSYNC && - mutex_lock_killable(&current->signal->cred_guard_mutex)) - goto out_put_fd; + if (flags & SECCOMP_FILTER_FLAG_TSYNC) { + if (mutex_lock_killable(&current->signal->cred_guard_mutex)) + goto out_put_fd; + + if (unlikely(current->signal->exec_bprm)) { + mutex_unlock(&current->signal->cred_guard_mutex); + goto out_put_fd; + } + } spin_lock_irq(&current->sighand->siglock); diff --git a/tools/testing/selftests/ptrace/vmaccess.c b/tools/testing/selftests/ptrace/vmaccess.c index 4db327b44586..3b7d81fb99bb 100644 --- a/tools/testing/selftests/ptrace/vmaccess.c +++ b/tools/testing/selftests/ptrace/vmaccess.c @@ -39,8 +39,15 @@ TEST(vmaccess) f = open(mm, O_RDONLY); ASSERT_GE(f, 0); close(f); - f = kill(pid, SIGCONT); - ASSERT_EQ(f, 0); + f = waitpid(-1, NULL, 0); + ASSERT_NE(f, -1); + ASSERT_NE(f, 0); + ASSERT_NE(f, pid); + f = waitpid(-1, NULL, 0); + ASSERT_EQ(f, pid); + f = waitpid(-1, NULL, 0); + ASSERT_EQ(f, -1); + ASSERT_EQ(errno, ECHILD); } TEST(attach) @@ -57,22 +64,24 @@ TEST(attach) sleep(1); k = ptrace(PTRACE_ATTACH, pid, 0L, 0L); - ASSERT_EQ(errno, EAGAIN); - ASSERT_EQ(k, -1); + ASSERT_EQ(k, 0); k = waitpid(-1, &s, WNOHANG); ASSERT_NE(k, -1); ASSERT_NE(k, 0); ASSERT_NE(k, pid); ASSERT_EQ(WIFEXITED(s), 1); ASSERT_EQ(WEXITSTATUS(s), 0); - sleep(1); - k = ptrace(PTRACE_ATTACH, pid, 0L, 0L); + k = waitpid(-1, &s, 0); + ASSERT_EQ(k, pid); + ASSERT_EQ(WIFSTOPPED(s), 1); + ASSERT_EQ(WSTOPSIG(s), SIGTRAP); + k = ptrace(PTRACE_CONT, pid, 0L, 0L); ASSERT_EQ(k, 0); k = waitpid(-1, &s, 0); ASSERT_EQ(k, pid); ASSERT_EQ(WIFSTOPPED(s), 1); ASSERT_EQ(WSTOPSIG(s), SIGSTOP); - k = ptrace(PTRACE_DETACH, pid, 0L, 0L); + k = ptrace(PTRACE_CONT, pid, 0L, 0L); ASSERT_EQ(k, 0); k = waitpid(-1, &s, 0); ASSERT_EQ(k, pid); -- 2.39.2

10 hours, 42 minutes

8
22
0 0

[PATCH 00/12] tools/nolibc: always use 64-bit ino_t, off_t and time-related types

by Thomas Weißschuh

nolibc currently uses 32-bit types for various APIs. These are problematic as their reduced value range can lead to truncated values. Signed-off-by: Thomas Weißschuh <linux(a)weissschuh.net> --- Thomas Weißschuh (12): tools/nolibc: use 64-bit ino_t tools/nolibc: handle 64-bit off_t for llseek tools/nolibc: prefer the llseek syscall tools/nolibc: use 64-bit off_t tools/nolibc: remove now superfluous overflow check in llseek tools/nolibc: remove more __nolibc_enosys() fallbacks tools/nolibc: prefer explicit 64-bit time-related system calls tools/nolibc: gettimeofday(): avoid libgcc 64-bit divisions tools/nolibc: use a custom struct timespec tools/nolibc: always use 64-bit time types selftests/nolibc: test compatibility of timespec and __kernel_timespec tools/nolibc: remove time conversions tools/include/nolibc/arch-s390.h | 3 + tools/include/nolibc/poll.h | 12 ++-- tools/include/nolibc/std.h | 6 +- tools/include/nolibc/sys.h | 21 +++--- tools/include/nolibc/sys/time.h | 2 +- tools/include/nolibc/sys/timerfd.h | 20 +----- tools/include/nolibc/time.h | 96 ++++++---------------------- tools/include/nolibc/types.h | 9 ++- tools/testing/selftests/nolibc/nolibc-test.c | 18 ++++++ 9 files changed, 68 insertions(+), 119 deletions(-) --- base-commit: 90ee85c0e1e4b5804ceebbd731653e10ef3849a6 change-id: 20251001-nolibc-uapi-types-1c072d10fcc7 Best regards, -- Thomas Weißschuh <linux(a)weissschuh.net>

17 hours, 8 minutes

3
26
0 0

[PATCH v2 0/2] Print map ID on successful creation

by Harshit Mogalapalli

Hi all, I have tried looking at an issue from the bpftool repository: https://github.com/libbpf/bpftool/issues/121 and this RFC tries to add that enhancement. Summary: Currently when a map creation is successful there is no message on the terminal, printing IDs on successful creation of maps can help notify the user and can be used in CI/CD. The first patch adds the logic for printing and the second patch adds a simple selftest for the same. The github issue is not fully solved with these two patches, as there are other bpf objects that might need similar additions. Would appreciate any inputs on this. Thank you very much. V1 --> V2: PATCH 1 updated [Thanks Yonghong for suggesting better way of error handling with a new label for close(fd); instead of calling multiple times] Regards, Harshit Harshit Mogalapalli (2): bpftool: Print map ID upon creation and support JSON output selftests/bpf: Add test for bpftool map ID printing tools/bpf/bpftool/map.c | 21 ++++++++--- .../testing/selftests/bpf/test_bpftool_map.sh | 36 +++++++++++++++++++ 2 files changed, 53 insertions(+), 4 deletions(-) -- 2.50.1

1 day, 7 hours

3
8
0 0

[PATCH v7 00/12] Direct Map Removal Support for guest_memfd

by Patrick Roy

From: Patrick Roy <roypat(a)amazon.co.uk> [ based on kvm/next ] Unmapping virtual machine guest memory from the host kernel's direct map is a successful mitigation against Spectre-style transient execution issues: If the kernel page tables do not contain entries pointing to guest memory, then any attempted speculative read through the direct map will necessarily be blocked by the MMU before any observable microarchitectural side-effects happen. This means that Spectre-gadgets and similar cannot be used to target virtual machine memory. Roughly 60% of speculative execution issues fall into this category [1, Table 1]. This patch series extends guest_memfd with the ability to remove its memory from the host kernel's direct map, to be able to attain the above protection for KVM guests running inside guest_memfd. Additionally, a Firecracker branch with support for these VMs can be found on GitHub [2]. For more details, please refer to the v5 cover letter [v5]. No substantial changes in design have taken place since. === Changes Since v6 === - Drop patch for passing struct address_space to ->free_folio(), due to possible races with freeing of the address_space. (Hugh) - Stop using PG_uptodate / gmem preparedness tracking to keep track of direct map state. Instead, use the lowest bit of folio->private. (Mike, David) - Do direct map removal when establishing mapping of gmem folio instead of at allocation time, due to impossibility of handling direct map removal errors in kvm_gmem_populate(). (Patrick) - Do TLB flushes after direct map removal, and provide a module parameter to opt out from them, and a new patch to export flush_tlb_kernel_range() to KVM. (Will) [1]: https://download.vusec.net/papers/quarantine_raid23.pdf [2]: https://github.com/firecracker-microvm/firecracker/tree/feature/secret-hidi… [RFCv1]: https://lore.kernel.org/kvm/20240709132041.3625501-1-roypat@amazon.co.uk/ [RFCv2]: https://lore.kernel.org/kvm/20240910163038.1298452-1-roypat@amazon.co.uk/ [RFCv3]: https://lore.kernel.org/kvm/20241030134912.515725-1-roypat@amazon.co.uk/ [v4]: https://lore.kernel.org/kvm/20250221160728.1584559-1-roypat@amazon.co.uk/ [v5]: https://lore.kernel.org/kvm/20250828093902.2719-1-roypat@amazon.co.uk/ [v6]: https://lore.kernel.org/kvm/20250912091708.17502-1-roypat@amazon.co.uk/ Patrick Roy (12): arch: export set_direct_map_valid_noflush to KVM module x86/tlb: export flush_tlb_kernel_range to KVM module mm: introduce AS_NO_DIRECT_MAP KVM: guest_memfd: Add stub for kvm_arch_gmem_invalidate KVM: guest_memfd: Add flag to remove from direct map KVM: guest_memfd: add module param for disabling TLB flushing KVM: selftests: load elf via bounce buffer KVM: selftests: set KVM_MEM_GUEST_MEMFD in vm_mem_add() if guest_memfd != -1 KVM: selftests: Add guest_memfd based vm_mem_backing_src_types KVM: selftests: cover GUEST_MEMFD_FLAG_NO_DIRECT_MAP in existing selftests KVM: selftests: stuff vm_mem_backing_src_type into vm_shape KVM: selftests: Test guest execution from direct map removed gmem Documentation/virt/kvm/api.rst | 5 ++ arch/arm64/include/asm/kvm_host.h | 12 ++++ arch/arm64/mm/pageattr.c | 1 + arch/loongarch/mm/pageattr.c | 1 + arch/riscv/mm/pageattr.c | 1 + arch/s390/mm/pageattr.c | 1 + arch/x86/include/asm/tlbflush.h | 3 +- arch/x86/mm/pat/set_memory.c | 1 + arch/x86/mm/tlb.c | 1 + include/linux/kvm_host.h | 9 +++ include/linux/pagemap.h | 16 +++++ include/linux/secretmem.h | 18 ----- include/uapi/linux/kvm.h | 2 + lib/buildid.c | 4 +- mm/gup.c | 19 ++---- mm/mlock.c | 2 +- mm/secretmem.c | 8 +-- .../testing/selftests/kvm/guest_memfd_test.c | 2 + .../testing/selftests/kvm/include/kvm_util.h | 37 ++++++++--- .../testing/selftests/kvm/include/test_util.h | 8 +++ tools/testing/selftests/kvm/lib/elf.c | 8 +-- tools/testing/selftests/kvm/lib/io.c | 23 +++++++ tools/testing/selftests/kvm/lib/kvm_util.c | 61 +++++++++-------- tools/testing/selftests/kvm/lib/test_util.c | 8 +++ tools/testing/selftests/kvm/lib/x86/sev.c | 1 + .../selftests/kvm/pre_fault_memory_test.c | 1 + .../selftests/kvm/set_memory_region_test.c | 50 ++++++++++++-- .../kvm/x86/private_mem_conversions_test.c | 7 +- virt/kvm/guest_memfd.c | 66 +++++++++++++++++-- virt/kvm/kvm_main.c | 8 +++ 30 files changed, 290 insertions(+), 94 deletions(-) base-commit: a6ad54137af92535cfe32e19e5f3bc1bb7dbd383 -- 2.51.0

1 day, 17 hours

8
38
0 0

[PATCH] selftests/user_events: Avoid taking address of packed member in perf_test

by Ankit Khushwaha

Accessing 'reg.write_index' directly triggers a -Waddress-of-packed-member warning due to potential unaligned pointer access: perf_test.c:239:38: warning: taking address of packed member 'write_index' of class or structure 'user_reg' may result in an unaligned pointer value [-Waddress-of-packed-member] 239 | ASSERT_NE(-1, write(self->data_fd, &reg.write_index, | ^~~~~~~~~~~~~~~ Use memcpy() instead to safely copy the value and avoid unaligned pointer access across architectures. Signed-off-by: Ankit Khushwaha <ankitkhushwaha.linux(a)gmail.com> --- tools/testing/selftests/user_events/perf_test.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/user_events/perf_test.c b/tools/testing/selftests/user_events/perf_test.c index 201459d8094d..e4385f4aa231 100644 --- a/tools/testing/selftests/user_events/perf_test.c +++ b/tools/testing/selftests/user_events/perf_test.c @@ -201,6 +201,7 @@ TEST_F(user, perf_empty_events) { struct perf_event_mmap_page *perf_page; int page_size = sysconf(_SC_PAGESIZE); int id, fd; + __u32 write_index; __u32 *val; reg.size = sizeof(reg); @@ -236,7 +237,8 @@ TEST_F(user, perf_empty_events) { ASSERT_EQ(1 << reg.enable_bit, self->check); /* Ensure write shows up at correct offset */ - ASSERT_NE(-1, write(self->data_fd, &reg.write_index, + memcpy(&write_index, &reg.write_index, sizeof(reg.write_index)); + ASSERT_NE(-1, write(self->data_fd, &write_index, sizeof(reg.write_index))); val = (void *)(((char *)perf_page) + perf_page->data_offset); ASSERT_EQ(PERF_RECORD_SAMPLE, *val); -- 2.51.0

1 day, 23 hours

2
5
0 0

[PATCH net v2] selftests: netdevsim: Fix ethtool-coalesce.sh fail by installing ethtool-common.sh

by Wang Liang

The script "ethtool-common.sh" is not installed in INSTALL_PATH, and triggers some errors when I try to run the test 'drivers/net/netdevsim/ethtool-coalesce.sh': TAP version 13 1..1 # timeout set to 600 # selftests: drivers/net/netdevsim: ethtool-coalesce.sh # ./ethtool-coalesce.sh: line 4: ethtool-common.sh: No such file or directory # ./ethtool-coalesce.sh: line 25: make_netdev: command not found # ethtool: bad command line argument(s) # ./ethtool-coalesce.sh: line 124: check: command not found # ./ethtool-coalesce.sh: line 126: [: -eq: unary operator expected # FAILED /0 checks not ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh # exit=1 Install this file to avoid this error. After this patch: TAP version 13 1..1 # timeout set to 600 # selftests: drivers/net/netdevsim: ethtool-coalesce.sh # PASSED all 22 checks ok 1 selftests: drivers/net/netdevsim: ethtool-coalesce.sh Fixes: fbb8531e58bd ("selftests: extract common functions in ethtool-common.sh") Signed-off-by: Wang Liang <wangliang74(a)huawei.com> --- tools/testing/selftests/drivers/net/netdevsim/Makefile | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/tools/testing/selftests/drivers/net/netdevsim/Makefile b/tools/testing/selftests/drivers/net/netdevsim/Makefile index daf51113c827..df10c7243511 100644 --- a/tools/testing/selftests/drivers/net/netdevsim/Makefile +++ b/tools/testing/selftests/drivers/net/netdevsim/Makefile @@ -20,4 +20,8 @@ TEST_PROGS := \ udp_tunnel_nic.sh \ # end of TEST_PROGS +TEST_FILES := \ + ethtool-common.sh +# end of TEST_FILES + include ../../../lib.mk -- 2.34.1

2 days, 2 hours

2
1
0 0

[PATCH net] selftests/net: use destination options instead of hop-by-hop

by Anubhav Singh

The GRO self-test, gro.c, currently constructs IPv6 packets containing a Hop-by-Hop Options header (IPPROTO_HOPOPTS) to ensure the GRO path correctly handles IPv6 extension headers. However, network elements may be configured to drop packets with the Hop-by-Hop Options header (HBH). This causes the self-test to fail in environments where such network elements are present. To improve the robustness and reliability of this test in diverse network environments, switch from using IPPROTO_HOPOPTS to IPPROTO_DSTOPTS (Destination Options). The Destination Options header is less likely to be dropped by intermediate routers and still serves the core purpose of the test: validating GRO's handling of an IPv6 extension header. This change ensures the test can execute successfully without being incorrectly failed by network policies outside the kernel's control. Fixes: 7d1575014a63 ("selftests/net: GRO coalesce test") Reviewed-by: Willem de Bruijn <willemb(a)google.com> Signed-off-by: Anubhav Singh <anubhavsinggh(a)google.com> --- tools/testing/selftests/net/gro.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/net/gro.c b/tools/testing/selftests/net/gro.c index 2b1d9f2b3e9e..d8c29fe39c1d 100644 --- a/tools/testing/selftests/net/gro.c +++ b/tools/testing/selftests/net/gro.c @@ -754,11 +754,11 @@ static void send_ipv6_exthdr(int fd, struct sockaddr_ll *daddr, char *ext_data1, static char exthdr_pck[sizeof(buf) + MIN_EXTHDR_SIZE]; create_packet(buf, 0, 0, PAYLOAD_LEN, 0); - add_ipv6_exthdr(buf, exthdr_pck, IPPROTO_HOPOPTS, ext_data1); + add_ipv6_exthdr(buf, exthdr_pck, IPPROTO_DSTOPTS, ext_data1); write_packet(fd, exthdr_pck, total_hdr_len + PAYLOAD_LEN + MIN_EXTHDR_SIZE, daddr); create_packet(buf, PAYLOAD_LEN * 1, 0, PAYLOAD_LEN, 0); - add_ipv6_exthdr(buf, exthdr_pck, IPPROTO_HOPOPTS, ext_data2); + add_ipv6_exthdr(buf, exthdr_pck, IPPROTO_DSTOPTS, ext_data2); write_packet(fd, exthdr_pck, total_hdr_len + PAYLOAD_LEN + MIN_EXTHDR_SIZE, daddr); } -- 2.51.1.851.g4ebd6896fd-goog

2 days, 2 hours

2
1
0 0

[PATCH net] selftests/net: fix out-of-order delivery of FIN in gro:tcp test

by Anubhav Singh

Due to the gro_sender sending data packets and FIN packets in very quick succession, these are received almost simultaneously by the gro_receiver. FIN packets are sometimes processed before the data packets leading to intermittent (~1/100) test failures. This change adds a delay of 100ms before sending FIN packets in gro:tcp test to avoid the out-of-order delivery. The same mitigation already exists for the gro:ip test. Fixes: 7d1575014a63 ("selftests/net: GRO coalesce test") Reviewed-by: Willem de Bruijn <willemb(a)google.com> Signed-off-by: Anubhav Singh <anubhavsinggh(a)google.com> --- tools/testing/selftests/net/gro.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/tools/testing/selftests/net/gro.c b/tools/testing/selftests/net/gro.c index 2b1d9f2b3e9e..3fa63bd85dea 100644 --- a/tools/testing/selftests/net/gro.c +++ b/tools/testing/selftests/net/gro.c @@ -989,6 +989,7 @@ static void check_recv_pkts(int fd, int *correct_payload, static void gro_sender(void) { + const int fin_delay_us = 100 * 1000; static char fin_pkt[MAX_HDR_LEN]; struct sockaddr_ll daddr = {}; int txfd = -1; @@ -1032,15 +1033,22 @@ static void gro_sender(void) write_packet(txfd, fin_pkt, total_hdr_len, &daddr); } else if (strcmp(testname, "tcp") == 0) { send_changed_checksum(txfd, &daddr); + /* Adding sleep before sending FIN so that it is not + * received prior to other packets. + */ + usleep(fin_delay_us); write_packet(txfd, fin_pkt, total_hdr_len, &daddr); send_changed_seq(txfd, &daddr); + usleep(fin_delay_us); write_packet(txfd, fin_pkt, total_hdr_len, &daddr); send_changed_ts(txfd, &daddr); + usleep(fin_delay_us); write_packet(txfd, fin_pkt, total_hdr_len, &daddr); send_diff_opt(txfd, &daddr); + usleep(fin_delay_us); write_packet(txfd, fin_pkt, total_hdr_len, &daddr); } else if (strcmp(testname, "ip") == 0) { send_changed_ECN(txfd, &daddr); -- 2.51.1.851.g4ebd6896fd-goog

2 days, 2 hours

3
3
0 0

[PATCH 0/3] introduce VM_MAYBE_GUARD and make it sticky

by Lorenzo Stoakes

Currently, guard regions are not visible to users except through /proc/$pid/pagemap, with no explicit visibility at the VMA level. This makes the feature less useful, as it isn't entirely apparent which VMAs may have these entries present, especially when performing actions which walk through memory regions such as those performed by CRIU. This series addresses this issue by introducing the VM_MAYBE_GUARD flag which fulfils this role, updating the smaps logic to display an entry for these. The semantics of this flag are that a guard region MAY be present if set (we cannot be sure, as we can't efficiently track whether an MADV_GUARD_REMOVE finally removes all the guard regions in a VMA) - but if not set the VMA definitely does NOT have any guard regions present. It's problematic to establish this flag without further action, because that means that VMAs with guard regions in them become non-mergeable with adjacent VMAs for no especially good reason. To work around this, this series also introduces the concept of 'sticky' VMA flags - that is flags which: a. if set in one VMA and not in another still permit those VMAs to be merged (if otherwise compatible). b. When they are merged, the resultant VMA must have the flag set. The VMA logic is updated to propagate these flags correctly. Additionally, VM_MAYBE_GUARD being an explicit VMA flag allows us to solve an issue with file-backed guard regions - previously these established an anon_vma object for file-backed mappings solely to have vma_needs_copy() correctly propagate guard region mappings to child processes. We introduce a new flag alias VM_COPY_ON_FORK (which currently only specifies VM_MAYBE_GUARD) and update vma_needs_copy() to check explicitly for this flag and to copy page tables if it is present, which resolves this issue. Finally we introduce extensive VMA userland tests to assert that the sticky VMA logic behaves correctly as well as guard region self tests to assert that smaps visibility is correctly implemented. Lorenzo Stoakes (3): mm: introduce VM_MAYBE_GUARD and make visible for guard regions mm: implement sticky, copy on fork VMA flags selftests/mm/guard-regions: add smaps visibility test Documentation/filesystems/proc.rst | 1 + fs/proc/task_mmu.c | 1 + include/linux/mm.h | 33 ++++++ include/trace/events/mmflags.h | 1 + mm/madvise.c | 22 ++-- mm/memory.c | 3 + mm/vma.c | 22 ++-- tools/testing/selftests/mm/guard-regions.c | 120 +++++++++++++++++++++ tools/testing/selftests/mm/vm_util.c | 5 + tools/testing/selftests/mm/vm_util.h | 1 + tools/testing/vma/vma.c | 89 +++++++++++++-- tools/testing/vma/vma_internal.h | 33 ++++++ 12 files changed, 303 insertions(+), 28 deletions(-) -- 2.51.0

2 days, 3 hours

5
24
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror October 2025