February 2025 - Linux-kselftest-mirror

[PATCH] selftests: sched: add sched as a default selftest target

by Sinadin Shan

The sched tests are missing a target entry and hence out-of-tree build support. For instance: make -C tools/testing/selftests install INSTALL_LOCATION=/foo/bar is expected to build the sched tests and place them at /foo/bar. But this is not observed since a TARGET entry is not present for sched. This was suggested by Shuah in this conversation Link: https://lore.kernel.org/linux-kselftest/60dd0240-8e45-4958-acf2-7eeee917785… Add support for sched selftests by adding sched as a default TARGET Signed-off-by: Sinadin Shan <sinadin.shan(a)oracle.com> --- tools/testing/selftests/Makefile | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/testing/selftests/Makefile b/tools/testing/selftests/Makefile index 8daac70c2f9d2..e2d0d389ad912 100644 --- a/tools/testing/selftests/Makefile +++ b/tools/testing/selftests/Makefile @@ -91,6 +91,7 @@ TARGETS += rlimits TARGETS += rseq TARGETS += rtc TARGETS += rust +TARGETS += sched TARGETS += sched_ext TARGETS += seccomp TARGETS += sgx -- 2.43.5

2 months, 2 weeks

4
8
0 0

[PATCH] selftests/sysctl: fix wording of help messages

by Bharadwaj Raju

Fix paramter -> parameter, and recomended -> recommended in sysctl.sh's help messages. Also correct grammar: "number amount of times is recommended" etc -> "the recommended number of times". Signed-off-by: Bharadwaj Raju <bharadwaj.raju777(a)gmail.com> --- tools/testing/selftests/sysctl/sysctl.sh | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/sysctl/sysctl.sh b/tools/testing/selftests/sysctl/sysctl.sh index 84472b436c07..a8e5736e89a8 100755 --- a/tools/testing/selftests/sysctl/sysctl.sh +++ b/tools/testing/selftests/sysctl/sysctl.sh @@ -764,7 +764,7 @@ sysctl_test_0007() fi if [ ! -f /proc/cmdline ]; then - echo -e "SKIPPING\nThere is no /proc/cmdline to check for paramter" + echo -e "SKIPPING\nThere is no /proc/cmdline to check for parameter" return $ksft_skip fi @@ -884,7 +884,7 @@ usage() echo "Valid tests: 0001-$MAX_TEST" echo "" echo " all Runs all tests (default)" - echo " -t Run test ID the number amount of times is recommended" + echo " -t Run test ID the recommended number of times" echo " -w Watch test ID run until it runs into an error" echo " -c Run test ID once" echo " -s Run test ID x test-count number of times" @@ -898,7 +898,7 @@ usage() echo Example uses: echo echo "$TEST_NAME.sh -- executes all tests" - echo "$TEST_NAME.sh -t 0002 -- Executes test ID 0002 number of times is recomended" + echo "$TEST_NAME.sh -t 0002 -- Executes test ID 0002 the recommended number of times" echo "$TEST_NAME.sh -w 0002 -- Watch test ID 0002 run until an error occurs" echo "$TEST_NAME.sh -s 0002 -- Run test ID 0002 once" echo "$TEST_NAME.sh -c 0002 3 -- Run test ID 0002 three times" -- 2.48.1

2 months, 2 weeks

2
1
0 0

[PATCH] selftests: fix spelling/grammar errors in sysctl/sysctl.sh

by Chandra Pratap

Fix the grammatical/spelling errors in sysctl/sysctl.sh. This fixes all errors pointed out by codespell in the file. Signed-off-by: Chandra Pratap <chandrapratap3519(a)gmail.com> --- tools/testing/selftests/sysctl/sysctl.sh | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/tools/testing/selftests/sysctl/sysctl.sh b/tools/testing/selftests/sysctl/sysctl.sh index 84472b436c07..f6e129a82ffd 100755 --- a/tools/testing/selftests/sysctl/sysctl.sh +++ b/tools/testing/selftests/sysctl/sysctl.sh @@ -21,7 +21,7 @@ TEST_FILE=$(mktemp) # ENABLED: 1 if enabled, 0 otherwise # TARGET: test target file required on the test_sysctl module # SKIP_NO_TARGET: 1 skip if TARGET not there -# 0 run eventhough TARGET not there +# 0 run even though TARGET not there # # Once these are enabled please leave them as-is. Write your own test, # we have tons of space. @@ -764,7 +764,7 @@ sysctl_test_0007() fi if [ ! -f /proc/cmdline ]; then - echo -e "SKIPPING\nThere is no /proc/cmdline to check for paramter" + echo -e "SKIPPING\nThere is no /proc/cmdline to check for parameter" return $ksft_skip fi @@ -898,7 +898,7 @@ usage() echo Example uses: echo echo "$TEST_NAME.sh -- executes all tests" - echo "$TEST_NAME.sh -t 0002 -- Executes test ID 0002 number of times is recomended" + echo "$TEST_NAME.sh -t 0002 -- Executes test ID 0002 number of times is recommended" echo "$TEST_NAME.sh -w 0002 -- Watch test ID 0002 run until an error occurs" echo "$TEST_NAME.sh -s 0002 -- Run test ID 0002 once" echo "$TEST_NAME.sh -c 0002 3 -- Run test ID 0002 three times" -- 2.48.0-rc1

2 months, 2 weeks

2
1
0 0

[PATCH net-next v6 0/7] Some pktgen fixes/improvments (part I)

by Peter Seiderer

While taking a look at '[PATCH net] pktgen: Avoid out-of-range in get_imix_entries' ([1]) and '[PATCH net v2] pktgen: Avoid out-of-bounds access in get_imix_entries' ([2], [3]) and doing some tests and code review I detected that the /proc/net/pktgen/... parsing logic does not honour the user given buffer bounds (resulting in out-of-bounds access). This can be observed e.g. by the following simple test (sometimes the old/'longer' previous value is re-read from the buffer): $ echo add_device lo@0 > /proc/net/pktgen/kpktgend_0 $ echo "min_pkt_size 12345" > /proc/net/pktgen/lo\@0 && grep min_pkt_size /proc/net/pktgen/lo\@0 Params: count 1000 min_pkt_size: 12345 max_pkt_size: 0 Result: OK: min_pkt_size=12345 $ echo -n "min_pkt_size 123" > /proc/net/pktgen/lo\@0 && grep min_pkt_size /proc/net/pktgen/lo\@0 Params: count 1000 min_pkt_size: 12345 max_pkt_size: 0 Result: OK: min_pkt_size=12345 $ echo "min_pkt_size 123" > /proc/net/pktgen/lo\@0 && grep min_pkt_size /proc/net/pktgen/lo\@0 Params: count 1000 min_pkt_size: 123 max_pkt_size: 0 Result: OK: min_pkt_size=123 So fix the out-of-bounds access (and some minor findings) and add a simple proc_net_pktgen selftest... Patch set splited into part I (this one) - net: pktgen: replace ENOTSUPP with EOPNOTSUPP - net: pktgen: enable 'param=value' parsing - net: pktgen: fix hex32_arg parsing for short reads - net: pktgen: fix 'rate 0' error handling (return -EINVAL) - net: pktgen: fix 'ratep 0' error handling (return -EINVAL) - net: pktgen: fix ctrl interface command parsing - net: pktgen: fix access outside of user given buffer in pktgen_thread_write() And part II (will follow): - net: pktgen: fix mix of int/long - net: pktgen: remove extra tmp variable (re-use len instead) - net: pktgen: remove some superfluous variable initializing - net: pktgen: fix mpls maximum labels list parsing - net: pktgen: fix access outside of user given buffer in pktgen_if_write() - net: pktgen: fix mpls reset parsing - net: pktgen: remove all superfluous index assignements - selftest: net: add proc_net_pktgen Regards, Peter Changes v5 -> v6: - add rev-by Simon Horman - drop patch 'net: pktgen: use defines for the various dec/hex number parsing digits lengths' Changes v4 -> v5: - split up patchset into part i/ii (suggested by Simon Horman) Changes v3 -> v4: - add rev-by Simon Horman - new patch 'net: pktgen: use defines for the various dec/hex number parsing digits lengths' (suggested by Simon Horman) - replace C99 comment (suggested by Paolo Abeni) - drop available characters check in strn_len() (suggested by Paolo Abeni) - factored out patch 'net: pktgen: align some variable declarations to the most common pattern' (suggested by Paolo Abeni) - factored out patch 'net: pktgen: remove extra tmp variable (re-use len instead)' (suggested by Paolo Abeni) - factored out patch 'net: pktgen: remove some superfluous variable initializing' (suggested by Paolo Abeni) - factored out patch 'net: pktgen: fix mpls maximum labels list parsing' (suggested by Paolo Abeni) - factored out 'net: pktgen: hex32_arg/num_arg error out in case no characters are available' (suggested by Paolo Abeni) - factored out 'net: pktgen: num_arg error out in case no valid character is parsed' (suggested by Paolo Abeni) Changes v2 -> v3: - new patch: 'net: pktgen: fix ctrl interface command parsing' - new patch: 'net: pktgen: fix mpls reset parsing' - tools/testing/selftests/net/proc_net_pktgen.c: - fix typo in change description ('v1 -> v1' and tyop) - rename some vars to better match usage add_loopback_0 -> thr_cmd_add_loopback_0 rm_loopback_0 -> thr_cmd_rm_loopback_0 wrong_ctrl_cmd -> wrong_thr_cmd legacy_ctrl_cmd -> legacy_thr_cmd ctrl_fd -> thr_fd - add ctrl interface tests Changes v1 -> v2: - new patch: 'net: pktgen: fix hex32_arg parsing for short reads' - new patch: 'net: pktgen: fix 'rate 0' error handling (return -EINVAL)' - new patch: 'net: pktgen: fix 'ratep 0' error handling (return -EINVAL)' - net/core/pktgen.c: additional fix get_imix_entries() and get_labels() - tools/testing/selftests/net/proc_net_pktgen.c: - fix tyop not vs. nod (suggested by Jakub Kicinski) - fix misaligned line (suggested by Jakub Kicinski) - enable fomerly commented out CONFIG_XFRM dependent test (command spi), as CONFIG_XFRM is enabled via tools/testing/selftests/net/config CONFIG_XFRM_INTERFACE/CONFIG_XFRM_USER (suggestex by Jakub Kicinski) - add CONFIG_NET_PKTGEN=m to tools/testing/selftests/net/config (suggested by Jakub Kicinski) - add modprobe pktgen to FIXTURE_SETUP() (suggested by Jakub Kicinski) - fix some checkpatch warnings (Missing a blank line after declarations) - shrink line length by re-naming some variables (command -> cmd, device -> dev) - add 'rate 0' testcase - add 'ratep 0' testcase [1] https://lore.kernel.org/netdev/20241006221221.3744995-1-artem.chernyshev@re… [2] https://lore.kernel.org/netdev/20250109083039.14004-1-pchelkin@ispras.ru/ [3] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… Peter Seiderer (7): net: pktgen: replace ENOTSUPP with EOPNOTSUPP net: pktgen: enable 'param=value' parsing net: pktgen: fix hex32_arg parsing for short reads net: pktgen: fix 'rate 0' error handling (return -EINVAL) net: pktgen: fix 'ratep 0' error handling (return -EINVAL) net: pktgen: fix ctrl interface command parsing net: pktgen: fix access outside of user given buffer in pktgen_thread_write() net/core/pktgen.c | 39 ++++++++++++++++++++++----------------- 1 file changed, 22 insertions(+), 17 deletions(-) -- 2.48.1

2 months, 2 weeks

2
8
0 0

[PATCH net-next v2] tun: Pad virtio headers

by Akihiko Odaki

tun simply advances iov_iter when it needs to pad virtio header, which leaves the garbage in the buffer as is. This will become especially problematic when tun starts to allow enabling the hash reporting feature; even if the feature is enabled, the packet may lack a hash value and may contain a hole in the virtio header because the packet arrived before the feature gets enabled or does not contain the header fields to be hashed. If the hole is not filled with zero, it is impossible to tell if the packet lacks a hash value. In theory, a user of tun can fill the buffer with zero before calling read() to avoid such a problem, but leaving the garbage in the buffer is awkward anyway so replace advancing the iterator with writing zeros. A user might have initialized the buffer to some non-zero value, expecting tun to skip writing it. As this was never a documented feature, this seems unlikely. The overhead of filling the hole in the header is negligible when the header size is specified according to the specification as doing so will not make another cache line dirty under a reasonable assumption. Below is a proof of this statement: The first 10 bytes of the header is always written and tun also writes the packet itself immediately after the packet unless the packet is empty. This makes a hole between these writes whose size is: sz - 10 where sz is the specified header size. Therefore, we will never make another cache line dirty when: sz < L1_CACHE_BYTES + 10 where L1_CACHE_BYTES is the cache line size. Assuming L1_CACHE_BYTES >= 16, this inequation holds when: sz < 26. sz <= 20 according to the current specification so we even have a margin of 5 bytes in case that the header size grows in a future version of the specification. Signed-off-by: Akihiko Odaki <akihiko.odaki(a)daynix.com> --- Changes in v2: - Dropped the code to set num_buffers to 1. - Incorporated a grammatical improvement suggested by Michael S. Tsirkin. - Added an explanation of this patch's risk suggested by Michael S. Tsirkin. - Noted that it will not make another cache line dirty. - Added an error check. - Link to v1: https://lore.kernel.org/r/20250213-buffers-v1-1-ec4a0821957a@daynix.com --- drivers/net/tun_vnet.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/tun_vnet.h b/drivers/net/tun_vnet.h index fd7411c4447ffb180e032fe3e22f6709c30da8e9..58b9ac7a5fc4084c789fe94fe36b5f8631bf1fa4 100644 --- a/drivers/net/tun_vnet.h +++ b/drivers/net/tun_vnet.h @@ -143,7 +143,8 @@ static inline int tun_vnet_hdr_put(int sz, struct iov_iter *iter, if (unlikely(copy_to_iter(hdr, sizeof(*hdr), iter) != sizeof(*hdr))) return -EFAULT; - iov_iter_advance(iter, sz - sizeof(*hdr)); + if (iov_iter_zero(sz - sizeof(*hdr), iter) != sz - sizeof(*hdr)) + return -EFAULT; return 0; } --- base-commit: f54eab84fc17ef79b701e29364b7d08ca3a1d2f6 change-id: 20250116-buffers-96e14bf023fc prerequisite-change-id: 20241230-tun-66e10a49b0c7:v6 prerequisite-patch-id: 871dc5f146fb6b0e3ec8612971a8e8190472c0fb prerequisite-patch-id: 2797ed249d32590321f088373d4055ff3f430a0e prerequisite-patch-id: ea3370c72d4904e2f0536ec76ba5d26784c0cede prerequisite-patch-id: 837e4cf5d6b451424f9b1639455e83a260c4440d prerequisite-patch-id: ea701076f57819e844f5a35efe5cbc5712d3080d prerequisite-patch-id: 701646fb43ad04cc64dd2bf13c150ccbe6f828ce prerequisite-patch-id: 53176dae0c003f5b6c114d43f936cf7140d31bb5 Best regards, -- Akihiko Odaki <akihiko.odaki(a)daynix.com>

2 months, 2 weeks

5
4
0 0

[RESEND][PATCH 0/3] selftests/tracing: Test only toplevel README file not the instances

by Steven Rostedt

Allow some more tests to run in instances. There's a few tests that require something in README to be present to run. But currently README can't be used for instance tests. Fix that and then allow 4 more tests to run in instances. [ RESEND to include selftest maintainers and lists: original: https://lore.kernel.org/linux-trace-kernel/20250116012009.840870709@goodmis… ] Steven Rostedt (3): selftests/tracing: Test only toplevel README file not the instances selftests/ftrace: Clean up triggers after setting them selftests/tracing: Allow some more tests to run in instances ---- tools/testing/selftests/ftrace/test.d/functions | 8 +++++++- .../test.d/trigger/inter-event/trigger-action-hist-xfail.tc | 1 + .../test.d/trigger/inter-event/trigger-onchange-action-hist.tc | 3 +++ .../test.d/trigger/inter-event/trigger-snapshot-action-hist.tc | 3 +++ .../selftests/ftrace/test.d/trigger/trigger-hist-expressions.tc | 1 + 5 files changed, 15 insertions(+), 1 deletion(-)

2 months, 2 weeks

2
4
0 0

[PATCH 0/6] selftests/mm: Some cleanups from trying to run them

by Brendan Jackman

I never had much luck running mm selftests so I spent a couple of hours digging into why. Looks like most of the reason is missing SKIP checks, so this series is just adding a bunch of those that I found. I did not do anything like all of them, just the ones I spotted in gup_test, mmap, userfaultfd and memfd_secret. Signed-off-by: Brendan Jackman <jackmanb(a)google.com> --- Brendan Jackman (6): selftests/mm: Report errno when things fail selftests/mm: Fix assumption that sudo is present selftests/mm: Skip uffd-stress if userfaultfd not available selftests/mm: Skip uffd-wp-mremap if userfaultfd not available selftests/mm: Print some details when uffd-stress gets bad params selftests/mm: Don't fail uffd-stress if too many CPUs tools/testing/selftests/mm/gup_longterm.c | 32 ++++++++++++++--------------- tools/testing/selftests/mm/run_vmtests.sh | 22 ++++++++++++++++---- tools/testing/selftests/mm/uffd-stress.c | 11 +++++++--- tools/testing/selftests/mm/uffd-wp-mremap.c | 5 ++++- 4 files changed, 46 insertions(+), 24 deletions(-) --- base-commit: 87a132e73910e8689902aed7f2fc229d6908383b change-id: 20250220-mm-selftests-2d7d0542face Best regards, -- Brendan Jackman <jackmanb(a)google.com>

2 months, 2 weeks

2
13
0 0

[PATCH] selftests/tracing: Test only toplevel README file not the instances

by Steven Rostedt

From: Steven Rostedt <rostedt(a)goodmis.org> For the tests that have both a README attribute as well as the instance flag to run the tests as an instance, the instance version will always exit with UNSUPPORTED. That's because the instance directory does not contain a README file. Currently, the tests check for a README file in the directory that the test runs in and if there's a requirement for something to be present in the README file, it will not find it, as the instance directory doesn't have it. Have the tests check if the current directory is an instance directory, and if it is, check two directories above the current directory for the README file: /sys/kernel/tracing/README /sys/kernel/tracing/instances/foo/../../README Signed-off-by: Steven Rostedt (Google) <rostedt(a)goodmis.org> --- tools/testing/selftests/ftrace/test.d/functions | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/ftrace/test.d/functions b/tools/testing/selftests/ftrace/test.d/functions index 779f3e62ec90..9f2a67fbaf4d 100644 --- a/tools/testing/selftests/ftrace/test.d/functions +++ b/tools/testing/selftests/ftrace/test.d/functions @@ -156,7 +156,13 @@ check_requires() { # Check required files and tracers exit_unsupported fi elif [ "$r" != "$i" ]; then - if ! grep -Fq "$r" README ; then + # If this is an instance, check the top directory + if echo $TRACING_DIR | grep -q "/instances/"; then + test="$TRACING_DIR/../.." + else + test=$TRACING_DIR + fi + if ! grep -Fq "$r" $test/README ; then echo "Required feature pattern \"$r\" is not in README." exit_unsupported fi -- 2.45.2

2 months, 2 weeks

2
6
0 0

[PATCH v6 0/9] Basic SEV-SNP Selftests

by Pratik R. Sampat

This patch series extends the sev_init2 and the sev_smoke test to exercise the SEV-SNP VM launch workflow. Primarily, it introduces the architectural defines, its support in the SEV library and extends the tests to interact with the SEV-SNP ioctl() wrappers. Patch 1 - Do not advertize SNP on incompatible firmware Patch 2 - Remove SEV support on platform init failure Patch 3 - SNP test for KVM_SEV_INIT2 Patch 4 - Add VMGEXIT helper Patch 5 - Introduce SEV+ VM type check Patch 6 - SNP iotcl() plumbing for the SEV library Patch 7 - Force set GUEST_MEMFD for SNP Patch 8 - Cleanups of smoke test - Decouple policy from type Patch 9 - SNP smoke test The series is based on git.kernel.org/pub/scm/virt/kvm/kvm.git next v5..v6 * Rename is_sev_platform_init to sev_fw_initialized (Nikunj) * Rename KVM CPU feature X86_FEATURE_SNP to X86_FEATURE_SEV_SNP (Nikunj) * Collected Tags from Nikunj, Pankaj, Srikanth. v4..v5: https://lore.kernel.org/kvm/8e7d8172-879e-4a28-8438-343b1c386ec9@amd.com/ * Introduced a check to disable advertising support for SEV, SEV-ES and SNP when platform initialization fails (Nikunj) * Remove the redundant SNP check within is_sev_vm() (Nikunj) * Cleanup of the encrypt_region flow for better readability (Nikunj) * Refactor paths to use the canonical $(ARCH) to rebase for kvm/next v3..v4: https://lore.kernel.org/kvm/20241114234104.128532-1-pratikrajesh.sampat@amd… * Remove SNP FW API version check in the test and ensure the KVM capability advertizes the presence of the feature. Retain the minimum version definitions to exercise these API versions in the smoke test * Retained only the SNP smoke test and SNP_INIT2 test * The SNP architectural defined merged with SNP_INIT2 test patch * SNP shutdown merged with SNP smoke test patch * Add SEV VM type check to abstract comparisons and reduce clutter * Define a SNP default policy which sets bits based on the presence of SMT * Decouple privatization and encryption for it to be SNP agnostic * Assert for only positive tests using vm_ioctl() * Dropped tested-by tags In summary - based on comments from Sean, I have primarily reduced the scope of this patch series to focus on breaking down the SNP smoke test patch (v3 - patch2) to first introduce SEV-SNP support and use this interface to extend the sev_init2 and the sev_smoke test. The rest of the v3 patchset that introduces ioctl, pre fault, fallocate and negative tests, will be re-worked and re-introduced subsequently in future patch series post addressing the issues discussed. v2..v3: https://lore.kernel.org/kvm/20240905124107.6954-1-pratikrajesh.sampat@amd.c… * Remove the assignments for the prefault and fallocate test type enums. * Fix error message for sev launch measure and finish. * Collect tested-by tags [Peter, Srikanth] Pratik R. Sampat (9): KVM: SEV: Disable SEV-SNP on FW validation failure KVM: SEV: Disable SEV on platform init failure KVM: selftests: SEV-SNP test for KVM_SEV_INIT2 KVM: selftests: Add VMGEXIT helper KVM: selftests: Introduce SEV VM type check KVM: selftests: Add library support for interacting with SNP KVM: selftests: Force GUEST_MEMFD flag for SNP VM type KVM: selftests: Abstractions for SEV to decouple policy from type KVM: selftests: Add a basic SEV-SNP smoke test arch/x86/kvm/svm/sev.c | 6 +- drivers/crypto/ccp/sev-dev.c | 16 +++ include/linux/psp-sev.h | 6 ++ .../selftests/kvm/include/x86/processor.h | 1 + tools/testing/selftests/kvm/include/x86/sev.h | 55 ++++++++++- tools/testing/selftests/kvm/lib/kvm_util.c | 7 +- .../testing/selftests/kvm/lib/x86/processor.c | 4 +- tools/testing/selftests/kvm/lib/x86/sev.c | 99 ++++++++++++++++++- .../selftests/kvm/x86/sev_init2_tests.c | 13 +++ .../selftests/kvm/x86/sev_smoke_test.c | 96 ++++++++++++++---- 10 files changed, 272 insertions(+), 31 deletions(-) -- 2.43.0

2 months, 2 weeks

3
23
0 0

[PATCH] selftests: pid_namespace and pidfd missing include

by Alessandro Zanni

Running "make kselftest" results in several errors like these: pidfd_fdinfo_test.c:231:36: error: ‘MS_REC’ undeclared (first use in this function) 231 | r = mount(NULL, "/", NULL, MS_REC | MS_PRIVATE, 0); pidfd_fdinfo_test.c:231:45: error: ‘MS_PRIVATE’ undeclared (first use in this function); did you mean ‘MAP_PRIVATE’? 231 | r = mount(NULL, "/", NULL, MS_REC | MS_PRIVATE, 0); pid_max.c:48:9: warning: implicit declaration of function ‘umount2’; did you mean ‘SYS_umount2’? [-Wimplicit-function-declaration] 48 | umount2("/proc", MNT_DETACH); This patch adds the <sys/mount.h> include in pidfd_fdinfo_test.c and pid_max.c files to find the variables MS_REC, MS_PRIVATE, MNT_DETACH. Signed-off-by: Alessandro Zanni <alessandro.zanni87(a)gmail.com> --- tools/testing/selftests/pid_namespace/pid_max.c | 1 + tools/testing/selftests/pidfd/pidfd_fdinfo_test.c | 1 + 2 files changed, 2 insertions(+) diff --git a/tools/testing/selftests/pid_namespace/pid_max.c b/tools/testing/selftests/pid_namespace/pid_max.c index 51c414faabb0..972bedc475f1 100644 --- a/tools/testing/selftests/pid_namespace/pid_max.c +++ b/tools/testing/selftests/pid_namespace/pid_max.c @@ -11,6 +11,7 @@ #include <string.h> #include <syscall.h> #include <sys/wait.h> +#include <sys/mount.h> #include "../kselftest_harness.h" #include "../pidfd/pidfd.h" diff --git a/tools/testing/selftests/pidfd/pidfd_fdinfo_test.c b/tools/testing/selftests/pidfd/pidfd_fdinfo_test.c index f062a986e382..f718aac75068 100644 --- a/tools/testing/selftests/pidfd/pidfd_fdinfo_test.c +++ b/tools/testing/selftests/pidfd/pidfd_fdinfo_test.c @@ -13,6 +13,7 @@ #include <syscall.h> #include <sys/wait.h> #include <sys/mman.h> +#include <sys/mount.h> #include "pidfd.h" #include "../kselftest.h" -- 2.43.0

2 months, 2 weeks

3
3
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror February 2025