February 2025 - Linux-kselftest-mirror

[PATCH] selftests/mm: run_vmtests.sh: fix half_ufd_size_MB calculation

by Rafael Aquini

From: Rafael Aquini <raquini(a)redhat.com> We noticed that uffd-stress test was always failing to run when invoked for the hugetlb profiles on x86_64 systems with a processor count of 64 or bigger: ... # ------------------------------------ # running ./uffd-stress hugetlb 128 32 # ------------------------------------ # ERROR: invalid MiB (errno=9, @uffd-stress.c:459) ... # [FAIL] not ok 3 uffd-stress hugetlb 128 32 # exit=1 ... The problem boils down to how run_vmtests.sh (mis)calculates the size of the region it feeds to uffd-stress. The latter expects to see an amount of MiB while the former is just giving out the number of free hugepages halved down. This measurement discrepancy ends up violating uffd-stress' assertion on number of hugetlb pages allocated per CPU, causing it to bail out with the error above. This commit fixes that issue by adjusting run_vmtests.sh's half_ufd_size_MB calculation so it properly renders the region size in MiB, as expected, while maintaining all of its original constraints in place. Fixes: 2e47a445d7b3 ("selftests/mm: run_vmtests.sh: fix hugetlb mem size calculation") Signed-off-by: Rafael Aquini <raquini(a)redhat.com> --- tools/testing/selftests/mm/run_vmtests.sh | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/mm/run_vmtests.sh b/tools/testing/selftests/mm/run_vmtests.sh index 333c468c2699..157d07e5aaa3 100755 --- a/tools/testing/selftests/mm/run_vmtests.sh +++ b/tools/testing/selftests/mm/run_vmtests.sh @@ -304,7 +304,9 @@ uffd_stress_bin=./uffd-stress CATEGORY="userfaultfd" run_test ${uffd_stress_bin} anon 20 16 # Hugetlb tests require source and destination huge pages. Pass in half # the size of the free pages we have, which is used for *each*. -half_ufd_size_MB=$((freepgs / 2)) +# uffd-stress expects a region expressed in MiB, so we adjust +# half_ufd_size_MB accordingly. +half_ufd_size_MB=$(((freepgs * hpgsize_KB) / 1024 / 2)) CATEGORY="userfaultfd" run_test ${uffd_stress_bin} hugetlb "$half_ufd_size_MB" 32 CATEGORY="userfaultfd" run_test ${uffd_stress_bin} hugetlb-private "$half_ufd_size_MB" 32 CATEGORY="userfaultfd" run_test ${uffd_stress_bin} shmem 20 16 -- 2.47.0

2 weeks, 1 day

3
2
0 0

[RFC PATCH 0/2] Add NV Selftest cases

by Ganapatrao Kulkarni

In this patch seried, modified kvm selftests code to enable guest code to run in vEL2(As guest Hypervisor). Also added test cases to test guest code booting in vEL2 and register access of VNCR mapped registers. This patchset is created as per discussions over ml[1]. Posting RFC patch for the early feedback and to further explore requirements and test cases. Ganapatrao Kulkarni (2): KVM: arm64: nv: selftests: Add guest hypervisor test KVM: arm64: nv: selftests: Access VNCR mapped registers tools/testing/selftests/kvm/Makefile.kvm | 2 + .../selftests/kvm/arm64/nv_guest_hypervisor.c | 83 ++++++ .../selftests/kvm/arm64/nv_vncr_regs_test.c | 255 ++++++++++++++++++ .../kvm/include/arm64/kvm_util_arch.h | 3 + .../selftests/kvm/include/arm64/nv_util.h | 28 ++ .../testing/selftests/kvm/include/kvm_util.h | 1 + .../selftests/kvm/lib/arm64/processor.c | 59 +++- 7 files changed, 417 insertions(+), 14 deletions(-) create mode 100644 tools/testing/selftests/kvm/arm64/nv_guest_hypervisor.c create mode 100644 tools/testing/selftests/kvm/arm64/nv_vncr_regs_test.c create mode 100644 tools/testing/selftests/kvm/include/arm64/nv_util.h -- 2.48.1

2 weeks, 1 day

2
9
0 0

[PATCH v7 2/2] selftests/rseq: Add test for mm_cid compaction

by Gabriele Monaco

A task in the kernel (task_mm_cid_work) runs somewhat periodically to compact the mm_cid for each process. Add a test to validate that it runs correctly and timely. The test spawns 1 thread pinned to each CPU, then each thread, including the main one, runs in short bursts for some time. During this period, the mm_cids should be spanning all numbers between 0 and nproc. At the end of this phase, a thread with high enough mm_cid (>= nproc/2) is selected to be the new leader, all other threads terminate. After some time, the only running thread should see 0 as mm_cid, if that doesn't happen, the compaction mechanism didn't work and the test fails. The test never fails if only 1 core is available, in which case, we cannot test anything as the only available mm_cid is 0. Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> Signed-off-by: Gabriele Monaco <gmonaco(a)redhat.com> --- tools/testing/selftests/rseq/.gitignore | 1 + tools/testing/selftests/rseq/Makefile | 2 +- .../selftests/rseq/mm_cid_compaction_test.c | 200 ++++++++++++++++++ 3 files changed, 202 insertions(+), 1 deletion(-) create mode 100644 tools/testing/selftests/rseq/mm_cid_compaction_test.c diff --git a/tools/testing/selftests/rseq/.gitignore b/tools/testing/selftests/rseq/.gitignore index 16496de5f6ce4..2c89f97e4f737 100644 --- a/tools/testing/selftests/rseq/.gitignore +++ b/tools/testing/selftests/rseq/.gitignore @@ -3,6 +3,7 @@ basic_percpu_ops_test basic_percpu_ops_mm_cid_test basic_test basic_rseq_op_test +mm_cid_compaction_test param_test param_test_benchmark param_test_compare_twice diff --git a/tools/testing/selftests/rseq/Makefile b/tools/testing/selftests/rseq/Makefile index 5a3432fceb586..ce1b38f46a355 100644 --- a/tools/testing/selftests/rseq/Makefile +++ b/tools/testing/selftests/rseq/Makefile @@ -16,7 +16,7 @@ OVERRIDE_TARGETS = 1 TEST_GEN_PROGS = basic_test basic_percpu_ops_test basic_percpu_ops_mm_cid_test param_test \ param_test_benchmark param_test_compare_twice param_test_mm_cid \ - param_test_mm_cid_benchmark param_test_mm_cid_compare_twice + param_test_mm_cid_benchmark param_test_mm_cid_compare_twice mm_cid_compaction_test TEST_GEN_PROGS_EXTENDED = librseq.so diff --git a/tools/testing/selftests/rseq/mm_cid_compaction_test.c b/tools/testing/selftests/rseq/mm_cid_compaction_test.c new file mode 100644 index 0000000000000..7ddde3b657dd6 --- /dev/null +++ b/tools/testing/selftests/rseq/mm_cid_compaction_test.c @@ -0,0 +1,200 @@ +// SPDX-License-Identifier: LGPL-2.1 +#define _GNU_SOURCE +#include <assert.h> +#include <pthread.h> +#include <sched.h> +#include <stdint.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <stddef.h> + +#include "../kselftest.h" +#include "rseq.h" + +#define VERBOSE 0 +#define printf_verbose(fmt, ...) \ + do { \ + if (VERBOSE) \ + printf(fmt, ##__VA_ARGS__); \ + } while (0) + +/* 0.5 s */ +#define RUNNER_PERIOD 500000 +/* Number of runs before we terminate or get the token */ +#define THREAD_RUNS 5 + +/* + * Number of times we check that the mm_cid were compacted. + * Checks are repeated every RUNNER_PERIOD. + */ +#define MM_CID_COMPACT_TIMEOUT 10 + +struct thread_args { + int cpu; + int num_cpus; + pthread_mutex_t *token; + pthread_barrier_t *barrier; + pthread_t *tinfo; + struct thread_args *args_head; +}; + +static void __noreturn *thread_runner(void *arg) +{ + struct thread_args *args = arg; + int i, ret, curr_mm_cid; + cpu_set_t cpumask; + + CPU_ZERO(&cpumask); + CPU_SET(args->cpu, &cpumask); + ret = pthread_setaffinity_np(pthread_self(), sizeof(cpumask), &cpumask); + if (ret) { + errno = ret; + perror("Error: failed to set affinity"); + abort(); + } + pthread_barrier_wait(args->barrier); + + for (i = 0; i < THREAD_RUNS; i++) + usleep(RUNNER_PERIOD); + curr_mm_cid = rseq_current_mm_cid(); + /* + * We select one thread with high enough mm_cid to be the new leader. + * All other threads (including the main thread) will terminate. + * After some time, the mm_cid of the only remaining thread should + * converge to 0, if not, the test fails. + */ + if (curr_mm_cid >= args->num_cpus / 2 && + !pthread_mutex_trylock(args->token)) { + printf_verbose( + "cpu%d has mm_cid=%d and will be the new leader.\n", + sched_getcpu(), curr_mm_cid); + for (i = 0; i < args->num_cpus; i++) { + if (args->tinfo[i] == pthread_self()) + continue; + ret = pthread_join(args->tinfo[i], NULL); + if (ret) { + errno = ret; + perror("Error: failed to join thread"); + abort(); + } + } + pthread_barrier_destroy(args->barrier); + free(args->tinfo); + free(args->token); + free(args->barrier); + free(args->args_head); + + for (i = 0; i < MM_CID_COMPACT_TIMEOUT; i++) { + curr_mm_cid = rseq_current_mm_cid(); + printf_verbose("run %d: mm_cid=%d on cpu%d.\n", i, + curr_mm_cid, sched_getcpu()); + if (curr_mm_cid == 0) + exit(EXIT_SUCCESS); + usleep(RUNNER_PERIOD); + } + exit(EXIT_FAILURE); + } + printf_verbose("cpu%d has mm_cid=%d and is going to terminate.\n", + sched_getcpu(), curr_mm_cid); + pthread_exit(NULL); +} + +int test_mm_cid_compaction(void) +{ + cpu_set_t affinity; + int i, j, ret = 0, num_threads; + pthread_t *tinfo; + pthread_mutex_t *token; + pthread_barrier_t *barrier; + struct thread_args *args; + + sched_getaffinity(0, sizeof(affinity), &affinity); + num_threads = CPU_COUNT(&affinity); + tinfo = calloc(num_threads, sizeof(*tinfo)); + if (!tinfo) { + perror("Error: failed to allocate tinfo"); + return -1; + } + args = calloc(num_threads, sizeof(*args)); + if (!args) { + perror("Error: failed to allocate args"); + ret = -1; + goto out_free_tinfo; + } + token = malloc(sizeof(*token)); + if (!token) { + perror("Error: failed to allocate token"); + ret = -1; + goto out_free_args; + } + barrier = malloc(sizeof(*barrier)); + if (!barrier) { + perror("Error: failed to allocate barrier"); + ret = -1; + goto out_free_token; + } + if (num_threads == 1) { + fprintf(stderr, "Cannot test on a single cpu. " + "Skipping mm_cid_compaction test.\n"); + /* only skipping the test, this is not a failure */ + goto out_free_barrier; + } + pthread_mutex_init(token, NULL); + ret = pthread_barrier_init(barrier, NULL, num_threads); + if (ret) { + errno = ret; + perror("Error: failed to initialise barrier"); + goto out_free_barrier; + } + for (i = 0, j = 0; i < CPU_SETSIZE && j < num_threads; i++) { + if (!CPU_ISSET(i, &affinity)) + continue; + args[j].num_cpus = num_threads; + args[j].tinfo = tinfo; + args[j].token = token; + args[j].barrier = barrier; + args[j].cpu = i; + args[j].args_head = args; + if (!j) { + /* The first thread is the main one */ + tinfo[0] = pthread_self(); + ++j; + continue; + } + ret = pthread_create(&tinfo[j], NULL, thread_runner, &args[j]); + if (ret) { + errno = ret; + perror("Error: failed to create thread"); + abort(); + } + ++j; + } + printf_verbose("Started %d threads.\n", num_threads); + + /* Also main thread will terminate if it is not selected as leader */ + thread_runner(&args[0]); + + /* only reached in case of errors */ +out_free_barrier: + free(barrier); +out_free_token: + free(token); +out_free_args: + free(args); +out_free_tinfo: + free(tinfo); + + return ret; +} + +int main(int argc, char **argv) +{ + if (!rseq_mm_cid_available()) { + fprintf(stderr, "Error: rseq_mm_cid unavailable\n"); + return -1; + } + if (test_mm_cid_compaction()) + return -1; + return 0; +} -- 2.48.1

2 weeks, 1 day

1
0
0 0

[PATCH v5 3/3] rseq/selftests: Add test for mm_cid compaction

by Gabriele Monaco

A task in the kernel (task_mm_cid_work) runs somewhat periodically to compact the mm_cid for each process. Add a test to validate that it runs correctly and timely. The test spawns 1 thread pinned to each CPU, then each thread, including the main one, runs in short bursts for some time. During this period, the mm_cids should be spanning all numbers between 0 and nproc. At the end of this phase, a thread with high enough mm_cid (>= nproc/2) is selected to be the new leader, all other threads terminate. After some time, the only running thread should see 0 as mm_cid, if that doesn't happen, the compaction mechanism didn't work and the test fails. The test never fails if only 1 core is available, in which case, we cannot test anything as the only available mm_cid is 0. To: Mathieu Desnoyers <mathieu.desnoyers(a)efficios.com> Signed-off-by: Gabriele Monaco <gmonaco(a)redhat.com> --- tools/testing/selftests/rseq/.gitignore | 1 + tools/testing/selftests/rseq/Makefile | 2 +- .../selftests/rseq/mm_cid_compaction_test.c | 200 ++++++++++++++++++ 3 files changed, 202 insertions(+), 1 deletion(-) create mode 100644 tools/testing/selftests/rseq/mm_cid_compaction_test.c diff --git a/tools/testing/selftests/rseq/.gitignore b/tools/testing/selftests/rseq/.gitignore index 16496de5f6ce4..2c89f97e4f737 100644 --- a/tools/testing/selftests/rseq/.gitignore +++ b/tools/testing/selftests/rseq/.gitignore @@ -3,6 +3,7 @@ basic_percpu_ops_test basic_percpu_ops_mm_cid_test basic_test basic_rseq_op_test +mm_cid_compaction_test param_test param_test_benchmark param_test_compare_twice diff --git a/tools/testing/selftests/rseq/Makefile b/tools/testing/selftests/rseq/Makefile index 5a3432fceb586..ce1b38f46a355 100644 --- a/tools/testing/selftests/rseq/Makefile +++ b/tools/testing/selftests/rseq/Makefile @@ -16,7 +16,7 @@ OVERRIDE_TARGETS = 1 TEST_GEN_PROGS = basic_test basic_percpu_ops_test basic_percpu_ops_mm_cid_test param_test \ param_test_benchmark param_test_compare_twice param_test_mm_cid \ - param_test_mm_cid_benchmark param_test_mm_cid_compare_twice + param_test_mm_cid_benchmark param_test_mm_cid_compare_twice mm_cid_compaction_test TEST_GEN_PROGS_EXTENDED = librseq.so diff --git a/tools/testing/selftests/rseq/mm_cid_compaction_test.c b/tools/testing/selftests/rseq/mm_cid_compaction_test.c new file mode 100644 index 0000000000000..701719b320049 --- /dev/null +++ b/tools/testing/selftests/rseq/mm_cid_compaction_test.c @@ -0,0 +1,200 @@ +// SPDX-License-Identifier: LGPL-2.1 +#define _GNU_SOURCE +#include <assert.h> +#include <pthread.h> +#include <sched.h> +#include <stdint.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <stddef.h> + +#include "../kselftest.h" +#include "rseq.h" + +#define VERBOSE 0 +#define printf_verbose(fmt, ...) \ + do { \ + if (VERBOSE) \ + printf(fmt, ##__VA_ARGS__); \ + } while (0) + +/* 0.5 s */ +#define RUNNER_PERIOD 500000 +/* Number of runs before we terminate or get the token */ +#define THREAD_RUNS 5 + +/* + * Number of times we check that the mm_cid were compacted. + * Checks are repeated every RUNNER_PERIOD. + */ +#define MM_CID_COMPACT_TIMEOUT 10 + +struct thread_args { + int cpu; + int num_cpus; + pthread_mutex_t *token; + pthread_barrier_t *barrier; + pthread_t *tinfo; + struct thread_args *args_head; +}; + +static void __noreturn *thread_runner(void *arg) +{ + struct thread_args *args = arg; + int i, ret, curr_mm_cid; + cpu_set_t cpumask; + + CPU_ZERO(&cpumask); + CPU_SET(args->cpu, &cpumask); + ret = pthread_setaffinity_np(pthread_self(), sizeof(cpumask), &cpumask); + if (ret) { + errno = ret; + perror("Error: failed to set affinity"); + abort(); + } + pthread_barrier_wait(args->barrier); + + for (i = 0; i < THREAD_RUNS; i++) + usleep(RUNNER_PERIOD); + curr_mm_cid = rseq_current_mm_cid(); + /* + * We select one thread with high enough mm_cid to be the new leader + * all other threads (including the main thread) will terminate. + * After some time, the mm_cid of the only remaining thread should + * converge to 0, if not, the test fails. + */ + if (curr_mm_cid >= args->num_cpus / 2 && + !pthread_mutex_trylock(args->token)) { + printf_verbose( + "cpu%d has mm_cid=%d and will be the new leader.\n", + sched_getcpu(), curr_mm_cid); + for (i = 0; i < args->num_cpus; i++) { + if (args->tinfo[i] == pthread_self()) + continue; + ret = pthread_join(args->tinfo[i], NULL); + if (ret) { + errno = ret; + perror("Error: failed to join thread"); + abort(); + } + } + pthread_barrier_destroy(args->barrier); + free(args->tinfo); + free(args->token); + free(args->barrier); + free(args->args_head); + + for (i = 0; i < MM_CID_COMPACT_TIMEOUT; i++) { + curr_mm_cid = rseq_current_mm_cid(); + printf_verbose("run %d: mm_cid=%d on cpu%d.\n", i, + curr_mm_cid, sched_getcpu()); + if (curr_mm_cid == 0) + exit(EXIT_SUCCESS); + usleep(RUNNER_PERIOD); + } + exit(EXIT_FAILURE); + } + printf_verbose("cpu%d has mm_cid=%d and is going to terminate.\n", + sched_getcpu(), curr_mm_cid); + pthread_exit(NULL); +} + +int test_mm_cid_compaction(void) +{ + cpu_set_t affinity; + int i, j, ret = 0, num_threads; + pthread_t *tinfo; + pthread_mutex_t *token; + pthread_barrier_t *barrier; + struct thread_args *args; + + sched_getaffinity(0, sizeof(affinity), &affinity); + num_threads = CPU_COUNT(&affinity); + tinfo = calloc(num_threads, sizeof(*tinfo)); + if (!tinfo) { + perror("Error: failed to allocate tinfo"); + return -1; + } + args = calloc(num_threads, sizeof(*args)); + if (!args) { + perror("Error: failed to allocate args"); + ret = -1; + goto out_free_tinfo; + } + token = malloc(sizeof(*token)); + if (!token) { + perror("Error: failed to allocate token"); + ret = -1; + goto out_free_args; + } + barrier = malloc(sizeof(*barrier)); + if (!barrier) { + perror("Error: failed to allocate barrier"); + ret = -1; + goto out_free_token; + } + if (num_threads == 1) { + fprintf(stderr, "Cannot test on a single cpu. " + "Skipping mm_cid_compaction test.\n"); + /* only skipping the test, this is not a failure */ + goto out_free_barrier; + } + pthread_mutex_init(token, NULL); + ret = pthread_barrier_init(barrier, NULL, num_threads); + if (ret) { + errno = ret; + perror("Error: failed to initialise barrier"); + goto out_free_barrier; + } + for (i = 0, j = 0; i < CPU_SETSIZE && j < num_threads; i++) { + if (!CPU_ISSET(i, &affinity)) + continue; + args[j].num_cpus = num_threads; + args[j].tinfo = tinfo; + args[j].token = token; + args[j].barrier = barrier; + args[j].cpu = i; + args[j].args_head = args; + if (!j) { + /* The first thread is the main one */ + tinfo[0] = pthread_self(); + ++j; + continue; + } + ret = pthread_create(&tinfo[j], NULL, thread_runner, &args[j]); + if (ret) { + errno = ret; + perror("Error: failed to create thread"); + abort(); + } + ++j; + } + printf_verbose("Started %d threads.\n", num_threads); + + /* Also main thread will terminate if it is not selected as leader */ + thread_runner(&args[0]); + + /* only reached in case of errors */ +out_free_barrier: + free(barrier); +out_free_token: + free(token); +out_free_args: + free(args); +out_free_tinfo: + free(tinfo); + + return ret; +} + +int main(int argc, char **argv) +{ + if (!rseq_mm_cid_available()) { + fprintf(stderr, "Error: rseq_mm_cid unavailable\n"); + return -1; + } + if (test_mm_cid_compaction()) + return -1; + return 0; +} -- 2.48.1

2 weeks, 1 day

3
4
0 0

[PATCH net-next v5 0/8] Some pktgen fixes/improvments (part I)

by Peter Seiderer

While taking a look at '[PATCH net] pktgen: Avoid out-of-range in get_imix_entries' ([1]) and '[PATCH net v2] pktgen: Avoid out-of-bounds access in get_imix_entries' ([2], [3]) and doing some tests and code review I detected that the /proc/net/pktgen/... parsing logic does not honour the user given buffer bounds (resulting in out-of-bounds access). This can be observed e.g. by the following simple test (sometimes the old/'longer' previous value is re-read from the buffer): $ echo add_device lo@0 > /proc/net/pktgen/kpktgend_0 $ echo "min_pkt_size 12345" > /proc/net/pktgen/lo\@0 && grep min_pkt_size /proc/net/pktgen/lo\@0 Params: count 1000 min_pkt_size: 12345 max_pkt_size: 0 Result: OK: min_pkt_size=12345 $ echo -n "min_pkt_size 123" > /proc/net/pktgen/lo\@0 && grep min_pkt_size /proc/net/pktgen/lo\@0 Params: count 1000 min_pkt_size: 12345 max_pkt_size: 0 Result: OK: min_pkt_size=12345 $ echo "min_pkt_size 123" > /proc/net/pktgen/lo\@0 && grep min_pkt_size /proc/net/pktgen/lo\@0 Params: count 1000 min_pkt_size: 123 max_pkt_size: 0 Result: OK: min_pkt_size=123 So fix the out-of-bounds access (and some minor findings) and add a simple proc_net_pktgen selftest... Patch set splited into part I (this one) - net: pktgen: replace ENOTSUPP with EOPNOTSUPP - net: pktgen: enable 'param=value' parsing - net: pktgen: fix hex32_arg parsing for short reads - net: pktgen: fix 'rate 0' error handling (return -EINVAL) - net: pktgen: fix 'ratep 0' error handling (return -EINVAL) - net: pktgen: fix ctrl interface command parsing - net: pktgen: fix access outside of user given buffer in pktgen_thread_write() And part II (will follow): - net: pktgen: use defines for the various dec/hex number parsing digits lengths - net: pktgen: fix mix of int/long - net: pktgen: remove extra tmp variable (re-use len instead) - net: pktgen: remove some superfluous variable initializing - net: pktgen: fix mpls maximum labels list parsing - net: pktgen: fix access outside of user given buffer in pktgen_if_write() - net: pktgen: fix mpls reset parsing - net: pktgen: remove all superfluous index assignements - selftest: net: add proc_net_pktgen Regards, Peter Changes v4 -> v5: - split up patchset into part i/ii (suggested by Simon Horman) Changes v3 -> v4: - add rev-by Simon Horman - new patch 'net: pktgen: use defines for the various dec/hex number parsing digits lengths' (suggested by Simon Horman) - replace C99 comment (suggested by Paolo Abeni) - drop available characters check in strn_len() (suggested by Paolo Abeni) - factored out patch 'net: pktgen: align some variable declarations to the most common pattern' (suggested by Paolo Abeni) - factored out patch 'net: pktgen: remove extra tmp variable (re-use len instead)' (suggested by Paolo Abeni) - factored out patch 'net: pktgen: remove some superfluous variable initializing' (suggested by Paolo Abeni) - factored out patch 'net: pktgen: fix mpls maximum labels list parsing' (suggested by Paolo Abeni) - factored out 'net: pktgen: hex32_arg/num_arg error out in case no characters are available' (suggested by Paolo Abeni) - factored out 'net: pktgen: num_arg error out in case no valid character is parsed' (suggested by Paolo Abeni) Changes v2 -> v3: - new patch: 'net: pktgen: fix ctrl interface command parsing' - new patch: 'net: pktgen: fix mpls reset parsing' - tools/testing/selftests/net/proc_net_pktgen.c: - fix typo in change description ('v1 -> v1' and tyop) - rename some vars to better match usage add_loopback_0 -> thr_cmd_add_loopback_0 rm_loopback_0 -> thr_cmd_rm_loopback_0 wrong_ctrl_cmd -> wrong_thr_cmd legacy_ctrl_cmd -> legacy_thr_cmd ctrl_fd -> thr_fd - add ctrl interface tests Changes v1 -> v2: - new patch: 'net: pktgen: fix hex32_arg parsing for short reads' - new patch: 'net: pktgen: fix 'rate 0' error handling (return -EINVAL)' - new patch: 'net: pktgen: fix 'ratep 0' error handling (return -EINVAL)' - net/core/pktgen.c: additional fix get_imix_entries() and get_labels() - tools/testing/selftests/net/proc_net_pktgen.c: - fix tyop not vs. nod (suggested by Jakub Kicinski) - fix misaligned line (suggested by Jakub Kicinski) - enable fomerly commented out CONFIG_XFRM dependent test (command spi), as CONFIG_XFRM is enabled via tools/testing/selftests/net/config CONFIG_XFRM_INTERFACE/CONFIG_XFRM_USER (suggestex by Jakub Kicinski) - add CONFIG_NET_PKTGEN=m to tools/testing/selftests/net/config (suggested by Jakub Kicinski) - add modprobe pktgen to FIXTURE_SETUP() (suggested by Jakub Kicinski) - fix some checkpatch warnings (Missing a blank line after declarations) - shrink line length by re-naming some variables (command -> cmd, device -> dev) - add 'rate 0' testcase - add 'ratep 0' testcase [1] https://lore.kernel.org/netdev/20241006221221.3744995-1-artem.chernyshev@re… [2] https://lore.kernel.org/netdev/20250109083039.14004-1-pchelkin@ispras.ru/ [3] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?… Peter Seiderer (8): net: pktgen: replace ENOTSUPP with EOPNOTSUPP net: pktgen: enable 'param=value' parsing net: pktgen: fix hex32_arg parsing for short reads net: pktgen: fix 'rate 0' error handling (return -EINVAL) net: pktgen: fix 'ratep 0' error handling (return -EINVAL) net: pktgen: fix ctrl interface command parsing net: pktgen: fix access outside of user given buffer in pktgen_thread_write() net: pktgen: use defines for the various dec/hex number parsing digits lengths net/core/pktgen.c | 119 +++++++++++++++++++++++++--------------------- 1 file changed, 66 insertions(+), 53 deletions(-) -- 2.48.1

2 weeks, 1 day

4
15
0 0

[PATCH bpf-next 0/3] selftests/bpf: tc_links/tc_opts: Unserialize tests

by Bastien Curutchet (eBPF Foundation)

Hi all, Both tc_links.c and tc_opts.c do their tests on the loopback interface. It prevents from parallelizing their executions. Use namespaces and the new append_tid() helper to allow this parallelization. Signed-off-by: Bastien Curutchet (eBPF Foundation) <bastien.curutchet(a)bootlin.com> --- Bastien Curutchet (eBPF Foundation) (3): selftests/bpf: tc_helpers: Add create_and_open_tid_ns() selftests/bpf: tc_link/tc_opts: Use unique namespace selftests/bpf: tc_links/tc_opts: Serialize tests .../testing/selftests/bpf/prog_tests/tc_helpers.h | 12 ++ tools/testing/selftests/bpf/prog_tests/tc_links.c | 164 +++++++++++++-- tools/testing/selftests/bpf/prog_tests/tc_opts.c | 230 ++++++++++++++++++--- 3 files changed, 361 insertions(+), 45 deletions(-) --- base-commit: cfed0f474a4bb2f12b54de5d6a7301cfb7dc0dbd change-id: 20250128-tc_links-d894a23b7063 Best regards, -- Bastien Curutchet (eBPF Foundation) <bastien.curutchet(a)bootlin.com>

2 weeks, 1 day

4
6
0 0

[PATCH bpf-next v2 0/2] bpf: fix ktls panic with sockmap and add tests

by Jiayuan Chen

We can reproduce the issue using the existing test program: './test_sockmap --ktls' Or use the selftest I provided, which will cause a panic: ------------[ cut here ]------------ kernel BUG at lib/iov_iter.c:629! PKRU: 55555554 Call Trace: <TASK> ? die+0x36/0x90 ? do_trap+0xdd/0x100 ? iov_iter_revert+0x178/0x180 ? iov_iter_revert+0x178/0x180 ? do_error_trap+0x7d/0x110 ? iov_iter_revert+0x178/0x180 ? exc_invalid_op+0x50/0x70 ? iov_iter_revert+0x178/0x180 ? asm_exc_invalid_op+0x1a/0x20 ? iov_iter_revert+0x178/0x180 ? iov_iter_revert+0x5c/0x180 tls_sw_sendmsg_locked.isra.0+0x794/0x840 tls_sw_sendmsg+0x52/0x80 ? inet_sendmsg+0x1f/0x70 __sys_sendto+0x1cd/0x200 ? find_held_lock+0x2b/0x80 ? syscall_trace_enter+0x140/0x270 ? __lock_release.isra.0+0x5e/0x170 ? find_held_lock+0x2b/0x80 ? syscall_trace_enter+0x140/0x270 ? lockdep_hardirqs_on_prepare+0xda/0x190 ? ktime_get_coarse_real_ts64+0xc2/0xd0 __x64_sys_sendto+0x24/0x30 do_syscall_64+0x90/0x170 1. It looks like the issue started occurring after bpf being introduced to ktls and later the addition of assertions to iov_iter has caused a panic. If my fix tag is incorrect, please assist me in correcting the fix tag. 2. I make minimal changes for now, it's enough to make ktls work correctly. --- v1->v2: Added more content to the commit message https://lore.kernel.org/all/20250123171552.57345-1-mrpre@163.com/#r --- Jiayuan Chen (2): bpf: fix ktls panic with sockmap selftests/bpf: add ktls selftest net/tls/tls_sw.c | 8 +- .../selftests/bpf/prog_tests/sockmap_ktls.c | 174 +++++++++++++++++- .../selftests/bpf/progs/test_sockmap_ktls.c | 26 +++ 3 files changed, 205 insertions(+), 3 deletions(-) create mode 100644 tools/testing/selftests/bpf/progs/test_sockmap_ktls.c -- 2.47.1

2 weeks, 2 days

1
2
0 0

[PATCH v2 Linux-6.12.y Linux-6.13.y 1/1] selftests/mm: build with -O2

by Yifei Liu

From: Kevin Brodsky <kevin.brodsky(a)arm.com> [ Upstream commit 46036188ea1f5266df23a6149dea0df1c77cd1c7 ] The mm kselftests are currently built with no optimisation (-O0). It's unclear why, and besides being obviously suboptimal, this also prevents the pkeys tests from working as intended. Let's build all the tests with -O2. [kevin.brodsky(a)arm.com: silence unused-result warnings] Link: https://lkml.kernel.org/r/20250107170110.2819685-1-kevin.brodsky@arm.com Link: https://lkml.kernel.org/r/20241209095019.1732120-6-kevin.brodsky@arm.com Signed-off-by: Kevin Brodsky <kevin.brodsky(a)arm.com> Cc: Aruna Ramakrishna <aruna.ramakrishna(a)oracle.com> Cc: Catalin Marinas <catalin.marinas(a)arm.com> Cc: Dave Hansen <dave.hansen(a)linux.intel.com> Cc: Joey Gouly <joey.gouly(a)arm.com> Cc: Keith Lucas <keith.lucas(a)oracle.com> Cc: Ryan Roberts <ryan.roberts(a)arm.com> Cc: Shuah Khan <shuah(a)kernel.org> Signed-off-by: Andrew Morton <akpm(a)linux-foundation.org> (cherry picked from commit 46036188ea1f5266df23a6149dea0df1c77cd1c7) [Yifei: This commit also fix the failure of pkey_sighandler_tests_64, which is also in linux-6.12.y and linux-6.13.y, thus backport this commit] Signed-off-by: Yifei Liu <yifei.l.liu(a)oracle.com> --- tools/testing/selftests/mm/Makefile | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/mm/Makefile b/tools/testing/selftests/mm/Makefile index 02e1204971b0..c0138cb19705 100644 --- a/tools/testing/selftests/mm/Makefile +++ b/tools/testing/selftests/mm/Makefile @@ -33,9 +33,16 @@ endif # LDLIBS. MAKEFLAGS += --no-builtin-rules -CFLAGS = -Wall -I $(top_srcdir) $(EXTRA_CFLAGS) $(KHDR_INCLUDES) $(TOOLS_INCLUDES) +CFLAGS = -Wall -O2 -I $(top_srcdir) $(EXTRA_CFLAGS) $(KHDR_INCLUDES) $(TOOLS_INCLUDES) LDLIBS = -lrt -lpthread -lm +# Some distributions (such as Ubuntu) configure GCC so that _FORTIFY_SOURCE is +# automatically enabled at -O1 or above. This triggers various unused-result +# warnings where functions such as read() or write() are called and their +# return value is not checked. Disable _FORTIFY_SOURCE to silence those +# warnings. +CFLAGS += -U_FORTIFY_SOURCE + TEST_GEN_FILES = cow TEST_GEN_FILES += compaction_test TEST_GEN_FILES += gup_longterm -- 2.46.0

2 weeks, 2 days

3
6
0 0

[PATCH] selftests: firmware: Improve readability in fallback mechanism message

by Brian Ochoa

This patch adds commas to clarify sentence structure: - "To confirm look for" --> "To confirm, look for" - "If you do remove this file" --> "If you do, remove this file" Signed-off-by: Brian Ochoa <brianeochoa(a)gmail.com> --- tools/testing/selftests/firmware/fw_fallback.sh | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/firmware/fw_fallback.sh b/tools/testing/selftests/firmware/fw_fallback.sh index 70d18be46af5..cd1ff88feb28 100755 --- a/tools/testing/selftests/firmware/fw_fallback.sh +++ b/tools/testing/selftests/firmware/fw_fallback.sh @@ -173,13 +173,13 @@ test_syfs_timeout() echo "" echo "This might be a distribution udev rule setup by your distribution" echo "to immediately cancel all fallback requests, this must be" - echo "removed before running these tests. To confirm look for" + echo "removed before running these tests. To confirm, look for" echo "a firmware rule like /lib/udev/rules.d/50-firmware.rules" echo "and see if you have something like this:" echo "" echo "SUBSYSTEM==\"firmware\", ACTION==\"add\", ATTR{loading}=\"-1\"" echo "" - echo "If you do remove this file or comment out this line before" + echo "If you do, remove this file or comment out this line before" echo "proceeding with these tests." exit 1 fi -- 2.34.1

2 weeks, 2 days

1
0
0 0

[PATCH] Fix SC2181 warning

by ritvikfoss＠gmail.com

From: Ritvik Gupta <ritvikfoss(a)gmail.com> Check exit-code directly with '!' instead of '$?' to improve readability and fix SC2181 warning, reported by shellcheck. Signed-off-by: Ritvik Gupta <ritvikfoss(a)gmail.com> --- tools/testing/selftests/kselftest_deps.sh | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/kselftest_deps.sh b/tools/testing/selftests/kselftest_deps.sh index 487e49fdf2a6..2a4720723ebf 100755 --- a/tools/testing/selftests/kselftest_deps.sh +++ b/tools/testing/selftests/kselftest_deps.sh @@ -262,8 +262,8 @@ then for lib in $test_libs; do let total_cnt+=1 - $CC -o $tmp_file.bin $lib $tmp_file > /dev/null 2>&1 - if [ $? -ne 0 ]; then + if ! $CC -o $tmp_file.bin $lib $tmp_file > /dev/null 2>&1 + then echo "FAIL: $test dependency check: $lib" >> $fail let fail_cnt+=1 fail_libs+="$lib " -- 2.48.1

2 weeks, 2 days

1
0
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror February 2025