February 2025 - Linux-kselftest-mirror

[PATCH v7 0/8] Buddy allocator like (or non-uniform) folio split

by Zi Yan

Hi Matthew, Can you please take a look at Patch 1 and let me know if the new xarray function looks good to you? I will send __filemap_add_folio() and shmem_split_large_entry() changes separately. Hi all, This patchset adds a new buddy allocator like (or non-uniform) large folio split from a order-n folio to order-m with m < n. It reduces 1. the total number of after-split folios from 2^(n-m) to n-m+1; 2. the amount of memory needed for multi-index xarray split from 2^(n/6-m/6) to n/6-m/6, assuming XA_CHUNK_SHIFT=6; 3. keep more large folios after a split from all order-m folios to order-(n-1) to order-m folios. For example, to split an order-9 to order-0, folio split generates 10 (or 11 for anonymous memory) folios instead of 512, allocates 1 xa_node instead of 8, and leaves 1 order-8, 1 order-7, ..., 1 order-1 and 2 order-0 folios (or 4 order-0 for anonymous memory) instead of 512 order-0 folios. It is on top of mm-everything-2025-02-07-05-27 with V6 reverted. It is ready to be merged. Instead of duplicating existing split_huge_page*() code, __folio_split() is introduced as the shared backend code for both split_huge_page_to_list_to_order() and folio_split(). __folio_split() can support both uniform split and buddy allocator like (or non-uniform) split. All existing split_huge_page*() users can be gradually converted to use folio_split() if possible. In this patchset, I converted truncate_inode_partial_folio() to use folio_split(). xfstests quick group passed for both tmpfs and xfs. Changelog === From V6[8]: 1. Added an xarray function xas_try_split() to support iterative folio split, removing the need of using xas_split_alloc() and xas_split(). The function guarantees that at most one xa_node is allocated for each call. 2. Added concrete numbers of after-split folios and xa_node savings to cover letter, commit log. (per Andrew) From V5[7]: 1. Split shmem to any lower order patches are in mm tree, so dropped from this series. 2. Rename split_folio_at() to try_folio_split() to clarify that non-uniform split will not be used if it is not supported. From V4[6]: 1. Enabled shmem support in both uniform and buddy allocator like split and added selftests for it. 2. Added functions to check if uniform split and buddy allocator like split are supported for the given folio and order. 3. Made truncate fall back to uniform split if buddy allocator split is not supported (CONFIG_READ_ONLY_THP_FOR_FS and FS without large folio). 4. Added the missing folio_clear_has_hwpoisoned() to __split_unmapped_folio(). From V3[5]: 1. Used xas_split_alloc(GFP_NOWAIT) instead of xas_nomem(), since extra operations inside xas_split_alloc() are needed for correctness. 2. Enabled folio_split() for shmem and no issue was found with xfstests quick test group. 3. Split both ends of a truncate range in truncate_inode_partial_folio() to avoid wasting memory in shmem truncate (per David Hildenbrand). 4. Removed page_in_folio_offset() since page_folio() does the same thing. 5. Finished truncate related tests from xfstests quick test group on XFS and tmpfs without issues. 6. Disabled buddy allocator like split on CONFIG_READ_ONLY_THP_FOR_FS and FS without large folio. This check was missed in the prior versions. From V2[3]: 1. Incorporated all the feedback from Kirill[4]. 2. Used GFP_NOWAIT for xas_nomem(). 3. Tested the code path when xas_nomem() fails. 4. Added selftests for folio_split(). 5. Fixed no THP config build error. From V1[2]: 1. Split the original patch 1 into multiple ones for easy review (per Kirill). 2. Added xas_destroy() to avoid memory leak. 3. Fixed nr_dropped not used error (per kernel test robot). 4. Added proper error handling when xas_nomem() fails to allocate memory for xas_split() during buddy allocator like split. From RFC[1]: 1. Merged backend code of split_huge_page_to_list_to_order() and folio_split(). The same code is used for both uniform split and buddy allocator like split. 2. Use xas_nomem() instead of xas_split_alloc() for folio_split(). 3. folio_split() now leaves the first after-split folio unlocked, instead of the one containing the given page, since the caller of truncate_inode_partial_folio() locks and unlocks the first folio. 4. Extended split_huge_page debugfs to use folio_split(). 5. Added truncate_inode_partial_folio() as first user of folio_split(). Design === folio_split() splits a large folio in the same way as buddy allocator splits a large free page for allocation. The purpose is to minimize the number of folios after the split. For example, if user wants to free the 3rd subpage in a order-9 folio, folio_split() will split the order-9 folio as: O-0, O-0, O-0, O-0, O-2, O-3, O-4, O-5, O-6, O-7, O-8 if it is anon O-1, O-0, O-0, O-2, O-3, O-4, O-5, O-6, O-7, O-9 if it is pagecache Since anon folio does not support order-1 yet. The split process is similar to existing approach: 1. Unmap all page mappings (split PMD mappings if exist); 2. Split meta data like memcg, page owner, page alloc tag; 3. Copy meta data in struct folio to sub pages, but instead of spliting the whole folio into multiple smaller ones with the same order in a shot, this approach splits the folio iteratively. Taking the example above, this approach first splits the original order-9 into two order-8, then splits left part of order-8 to two order-7 and so on; 4. Post-process split folios, like write mapping->i_pages for pagecache, adjust folio refcounts, add split folios to corresponding list; 5. Remap split folios 6. Unlock split folios. __split_unmapped_folio() and __split_folio_to_order() replace __split_huge_page() and __split_huge_page_tail() respectively. __split_unmapped_folio() uses different approaches to perform uniform split and buddy allocator like split: 1. uniform split: one single call to __split_folio_to_order() is used to uniformly split the given folio. All resulting folios are put back to the list after split. The folio containing the given page is left to caller to unlock and others are unlocked. 2. buddy allocator like (or non-uniform) split: (old_order - new_order) calls to __split_folio_to_order() are used to split the given folio at order N to order N-1. After each call, the target folio is changed to the one containing the page, which is given as a folio_split() parameter. After each call, folios not containing the page are put back to the list. The folio containing the page is put back to the list when its order is new_order. All folios are unlocked except the first folio, which is left to caller to unlock. Patch Overview === 1. Patch 1 added a new xarray function xas_try_split() to perform iterative xarray split. 2. Patch 2 added __split_unmapped_folio() and __split_folio_to_order() to prepare for moving to new backend split code. 3. Patch 3 moved common code in split_huge_page_to_list_to_order() to __folio_split(). 4. Patch 4 added new folio_split() and made split_huge_page_to_list_to_order() share the new __split_unmapped_folio() with folio_split(). 5. Patch 5 removed no longer used __split_huge_page() and __split_huge_page_tail(). 6. Patch 6 added a new in_folio_offset to split_huge_page debugfs for folio_split() test. 7. Patch 7 used try_folio_split() for truncate operation. 8. Patch 8 added folio_split() tests. Any comments and/or suggestions are welcome. Thanks. [1] https://lore.kernel.org/linux-mm/20241008223748.555845-1-ziy@nvidia.com/ [2] https://lore.kernel.org/linux-mm/20241028180932.1319265-1-ziy@nvidia.com/ [3] https://lore.kernel.org/linux-mm/20241101150357.1752726-1-ziy@nvidia.com/ [4] https://lore.kernel.org/linux-mm/e6ppwz5t4p4kvir6eqzoto4y5fmdjdxdyvxvtw43nc… [5] https://lore.kernel.org/linux-mm/20241205001839.2582020-1-ziy@nvidia.com/ [6] https://lore.kernel.org/linux-mm/20250106165513.104899-1-ziy@nvidia.com/ [7] https://lore.kernel.org/linux-mm/20250116211042.741543-1-ziy@nvidia.com/ [8] https://lore.kernel.org/linux-mm/20250205031417.1771278-1-ziy@nvidia.com/ Zi Yan (8): xarray: add xas_try_split() to split a multi-index entry. mm/huge_memory: add two new (not yet used) functions for folio_split() mm/huge_memory: move folio split common code to __folio_split() mm/huge_memory: add buddy allocator like (non-uniform) folio_split() mm/huge_memory: remove the old, unused __split_huge_page() mm/huge_memory: add folio_split() to debugfs testing interface. mm/truncate: use buddy allocator like folio split for truncate operation. selftests/mm: add tests for folio_split(), buddy allocator like split. Documentation/core-api/xarray.rst | 14 +- include/linux/huge_mm.h | 36 + include/linux/xarray.h | 7 + lib/test_xarray.c | 47 ++ lib/xarray.c | 136 +++- mm/huge_memory.c | 751 ++++++++++++------ mm/truncate.c | 31 +- tools/testing/radix-tree/Makefile | 1 + .../selftests/mm/split_huge_page_test.c | 34 +- 9 files changed, 772 insertions(+), 285 deletions(-) -- 2.47.2

2 months, 3 weeks

3
25
0 0

[PATCH v6 0/3] rust: kunit: Support KUnit tests with a user-space like syntax

by David Gow

Hi all, After much delay, v6 of the KUnit/Rust integration patchset is here. This change incorporates most of Miguels suggestions from v5 (save for some of the copyright headers I wasn't comfortable unilaterally changing). This means the documentation is much improved, and it should work more cleanly on Rust 1.83 and 1.84, no longer requiring static_mut_refs or const_mut_refs. (I'm not 100% sure I understand all of the details of this, but I'm comfortable enough with how it's ended up.) This has been rebased against 6.14-rc1/rust-next, and should be able to comfortably go in via either the KUnit or Rust trees. My suspicion is that there's more likely to be conflicts with the Rust work (due to the changes in rust/macros/lib.rs) than with KUnit, where there are no current patches which would break the API, so maybe it makes the most sense for it to go in via Rust for 6.15. This series was originally written by José Expósito, and has been modified and updated by Matt Gilbride, Miguel Ojeda, and myself. The original version can be found here: https://github.com/Rust-for-Linux/linux/pull/950 Add support for writing KUnit tests in Rust. While Rust doctests are already converted to KUnit tests and run, they're really better suited for examples, rather than as first-class unit tests. This series implements a series of direct Rust bindings for KUnit tests, as well as a new macro which allows KUnit tests to be written using a close variant of normal Rust unit test syntax. The only change required is replacing '#[cfg(test)]' with '#[kunit_tests(kunit_test_suite_name)]' An example test would look like: #[kunit_tests(rust_kernel_hid_driver)] mod tests { use super::*; use crate::{c_str, driver, hid, prelude::*}; use core::ptr; struct SimpleTestDriver; impl Driver for SimpleTestDriver { type Data = (); } #[test] fn rust_test_hid_driver_adapter() { let mut hid = bindings::hid_driver::default(); let name = c_str!("SimpleTestDriver"); static MODULE: ThisModule = unsafe { ThisModule::from_ptr(ptr::null_mut()) }; let res = unsafe { <hid::Adapter<SimpleTestDriver> as driver::DriverOps>::register(&mut hid, name, &MODULE) }; assert_eq!(res, Err(ENODEV)); // The mock returns -19 } } Please give this a go, and make sure I haven't broken it! There's almost certainly a lot of improvements which can be made -- and there's a fair case to be made for replacing some of this with generated C code which can use the C macros -- but this is hopefully an adequate implementation for now, and the interface can (with luck) remain the same even if the implementation changes. A few small notable missing features: - Attributes (like the speed of a test) are hardcoded to the default value. - Similarly, the module name attribute is hardcoded to NULL. In C, we use the KBUILD_MODNAME macro, but I couldn't find a way to use this from Rust which wasn't more ugly than just disabling it. - Assertions are not automatically rewritten to use KUnit assertions. --- Changes since v5: https://lore.kernel.org/all/20241213081035.2069066-1-davidgow@google.com/ - Rebased against 6.14-rc1 - Fixed a bunch of warnings / clippy lints introduced in Rust 1.83 and 1.84. - No longer needs static_mut_refs / const_mut_refs, and is much cleaned up as a result. (Thanks, Miguel) - Major documentation and example fixes. (Thanks, Miguel) Changes since v4: https://lore.kernel.org/linux-kselftest/20241101064505.3820737-1-davidgow@g… - Rebased against 6.13-rc1 - Allowed an unused_unsafe warning after the behaviour of addr_of_mut!() changed in Rust 1.82. (Thanks Boqun, Miguel) - "Expect" that the sample assert_eq!(1+1, 2) produces a clippy warning due to a redundant assertion. (Thanks Boqun, Miguel) - Fix some missing safety comments, and remove some unneeded 'unsafe' blocks. (Thanks Boqun) - Fix a couple of minor rustfmt issues which were triggering checkpatch warnings. Changes since v3: https://lore.kernel.org/linux-kselftest/20241030045719.3085147-2-davidgow@g… - The kunit_unsafe_test_suite!() macro now panic!s if the suite name is too long, triggering a compile error. (Thanks, Alice!) - The #[kunit_tests()] macro now preserves span information, so errors can be better reported. (Thanks, Boqun!) - The example tests have been updated to no longer use assert_eq!() with a constant bool argument (which triggered a clippy warning now we have the span info). Changes since v2: https://lore.kernel.org/linux-kselftest/20241029092422.2884505-1-davidgow@g… - Include missing rust/macros/kunit.rs file from v2. (Thanks Boqun!) - The kunit_unsafe_test_suite!() macro will truncate the name of the suite if it is too long. (Thanks Alice!) - The proc macro now emits an error if the suite name is too long. - We no longer needlessly use UnsafeCell<> in kunit_unsafe_test_suite!(). (Thanks Alice!) Changes since v1: https://lore.kernel.org/lkml/20230720-rustbind-v1-0-c80db349e3b5@google.com… - Rebase on top of the latest rust-next (commit 718c4069896c) - Make kunit_case a const fn, rather than a macro (Thanks Boqun) - As a result, the null terminator is now created with kernel::kunit::kunit_case_null() - Use the C kunit_get_current_test() function to implement in_kunit_test(), rather than re-implementing it (less efficiently) ourselves. Changes since the GitHub PR: - Rebased on top of kselftest/kunit - Add const_mut_refs feature This may conflict with https://lore.kernel.org/lkml/20230503090708.2524310-6-nmi@metaspace.dk/ - Add rust/macros/kunit.rs to the KUnit MAINTAINERS entry --- José Expósito (3): rust: kunit: add KUnit case and suite macros rust: macros: add macro to easily run KUnit tests rust: kunit: allow to know if we are in a test MAINTAINERS | 1 + rust/kernel/kunit.rs | 199 +++++++++++++++++++++++++++++++++++++++++++ rust/macros/kunit.rs | 161 ++++++++++++++++++++++++++++++++++ rust/macros/lib.rs | 29 +++++++ 4 files changed, 390 insertions(+) create mode 100644 rust/macros/kunit.rs -- 2.48.1.601.g30ceb7b040-goog

2 months, 3 weeks

3
17
0 0

[PATCH net 0/4] sockmap, vsock: For connectible sockets allow only connected

by Michal Luczaj

Series deals with one more case of vsock surprising BPF/sockmap by being inconsistency about (having an) assigned transport. KASAN: null-ptr-deref in range [0x0000000000000120-0x0000000000000127] CPU: 7 UID: 0 PID: 56 Comm: kworker/7:0 Not tainted 6.14.0-rc1+ Workqueue: vsock-loopback vsock_loopback_work RIP: 0010:vsock_read_skb+0x4b/0x90 Call Trace: sk_psock_verdict_data_ready+0xa4/0x2e0 virtio_transport_recv_pkt+0x1ca8/0x2acc vsock_loopback_work+0x27d/0x3f0 process_one_work+0x846/0x1420 worker_thread+0x5b3/0xf80 kthread+0x35a/0x700 ret_from_fork+0x2d/0x70 ret_from_fork_asm+0x1a/0x30 This bug, similarly to commit f6abafcd32f9 ("vsock/bpf: return early if transport is not assigned"), could be fixed with a single NULL check. But instead, let's explore another approach: take a hint from vsock_bpf_update_proto() and teach sockmap to accept only vsocks that are already connected (no risk of transport being dropped or reassigned). At the same time straight reject the listeners (vsock listening sockets do not carry any transport anyway). This way BPF does not have to worry about vsk->transport becoming NULL. Signed-off-by: Michal Luczaj <mhal(a)rbox.co> --- Michal Luczaj (4): sockmap, vsock: For connectible sockets allow only connected vsock/bpf: Warn on socket without transport selftest/bpf: Adapt vsock_delete_on_close to sockmap rejecting unconnected selftest/bpf: Add vsock test for sockmap rejecting unconnected net/core/sock_map.c | 3 + net/vmw_vsock/af_vsock.c | 3 + net/vmw_vsock/vsock_bpf.c | 2 +- .../selftests/bpf/prog_tests/sockmap_basic.c | 70 ++++++++++++++++------ 4 files changed, 59 insertions(+), 19 deletions(-) --- base-commit: 9c01a177c2e4b55d2bcce8a1f6bdd1d46a8320e3 change-id: 20250210-vsock-listen-sockmap-nullptr-e6e82ca79611 Best regards, -- Michal Luczaj <mhal(a)rbox.co>

2 months, 3 weeks

3
13
0 0

[RESEND v4 0/3] mm/pkey: Add PKEY_UNRESTRICTED macro

by Yury Khrustalev

Add PKEY_UNRESTRICTED macro to mman.h and use it in selftests. For context, this change will also allow for more consistent update of the Glibc manual which in turn will help with introducing memory protection keys on AArch64 targets. Applies to 5bc55a333a2f (tag: v6.13-rc7). Note that I couldn't build ppc tests so I would appreciate if someone could check the 3rd patch. Thank you! Signed-off-by: Yury Khrustalev <yury.khrustalev(a)arm.com> --- Changes in v4: - Removed change to tools/include/uapi/asm-generic/mman-common.h as it is not necessary. Link to v3: https://lore.kernel.org/all/20241028090715.509527-1-yury.khrustalev@arm.com/ Changes in v3: - Replaced previously missed 0-s tools/testing/selftests/mm/mseal_test.c - Replaced previously missed 0-s in tools/testing/selftests/mm/mseal_test.c Link to v2: https://lore.kernel.org/linux-arch/20241027170006.464252-2-yury.khrustalev@… Changes in v2: - Update tools/include/uapi/asm-generic/mman-common.h as well - Add usages of the new macro to selftests. Link to v1: https://lore.kernel.org/linux-arch/20241022120128.359652-1-yury.khrustalev@… --- Yury Khrustalev (3): mm/pkey: Add PKEY_UNRESTRICTED macro selftests/mm: Use PKEY_UNRESTRICTED macro selftests/powerpc: Use PKEY_UNRESTRICTED macro include/uapi/asm-generic/mman-common.h | 1 + tools/testing/selftests/mm/mseal_test.c | 6 +++--- tools/testing/selftests/mm/pkey-helpers.h | 3 ++- tools/testing/selftests/mm/pkey_sighandler_tests.c | 4 ++-- tools/testing/selftests/mm/protection_keys.c | 2 +- tools/testing/selftests/powerpc/include/pkeys.h | 2 +- tools/testing/selftests/powerpc/mm/pkey_exec_prot.c | 2 +- tools/testing/selftests/powerpc/mm/pkey_siginfo.c | 2 +- tools/testing/selftests/powerpc/ptrace/core-pkey.c | 6 +++--- tools/testing/selftests/powerpc/ptrace/ptrace-pkey.c | 6 +++--- 10 files changed, 18 insertions(+), 16 deletions(-) -- 2.39.5

2 months, 3 weeks

3
7
0 0

[PATCH] kunit: Clarify kunit_skip() argument name

by Kevin Brodsky

kunit_skip() and kunit_mark_skipped() can only be passed a pointer to a struct kunit, not struct kunit_suite (only kunit_log() actually supports both). Rename their first argument accordingly. Signed-off-by: Kevin Brodsky <kevin.brodsky(a)arm.com> --- Cc: Brendan Higgins <brendan.higgins(a)linux.dev> Cc: David Gow <davidgow(a)google.com> Cc: Rae Moar <rmoar(a)google.com> Cc: linux-kselftest(a)vger.kernel.org --- include/kunit/test.h | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/include/kunit/test.h b/include/kunit/test.h index 58dbab60f853..0ffb97c78566 100644 --- a/include/kunit/test.h +++ b/include/kunit/test.h @@ -553,9 +553,9 @@ void kunit_cleanup(struct kunit *test); void __printf(2, 3) kunit_log_append(struct string_stream *log, const char *fmt, ...); /** - * kunit_mark_skipped() - Marks @test_or_suite as skipped + * kunit_mark_skipped() - Marks @test as skipped * - * @test_or_suite: The test context object. + * @test: The test context object. * @fmt: A printk() style format string. * * Marks the test as skipped. @fmt is given output as the test status @@ -563,18 +563,18 @@ void __printf(2, 3) kunit_log_append(struct string_stream *log, const char *fmt, * * Test execution continues after kunit_mark_skipped() is called. */ -#define kunit_mark_skipped(test_or_suite, fmt, ...) \ +#define kunit_mark_skipped(test, fmt, ...) \ do { \ - WRITE_ONCE((test_or_suite)->status, KUNIT_SKIPPED); \ - scnprintf((test_or_suite)->status_comment, \ + WRITE_ONCE((test)->status, KUNIT_SKIPPED); \ + scnprintf((test)->status_comment, \ KUNIT_STATUS_COMMENT_SIZE, \ fmt, ##__VA_ARGS__); \ } while (0) /** - * kunit_skip() - Marks @test_or_suite as skipped + * kunit_skip() - Marks @test as skipped * - * @test_or_suite: The test context object. + * @test: The test context object. * @fmt: A printk() style format string. * * Skips the test. @fmt is given output as the test status @@ -582,10 +582,10 @@ void __printf(2, 3) kunit_log_append(struct string_stream *log, const char *fmt, * * Test execution is halted after kunit_skip() is called. */ -#define kunit_skip(test_or_suite, fmt, ...) \ +#define kunit_skip(test, fmt, ...) \ do { \ - kunit_mark_skipped((test_or_suite), fmt, ##__VA_ARGS__);\ - kunit_try_catch_throw(&((test_or_suite)->try_catch)); \ + kunit_mark_skipped((test), fmt, ##__VA_ARGS__); \ + kunit_try_catch_throw(&((test)->try_catch)); \ } while (0) /* base-commit: 0ad2507d5d93f39619fc42372c347d6006b64319 -- 2.47.0

2 months, 3 weeks

2
1
0 0

[PATCH] kunit: tool: Build GDB scripts

by Brendan Jackman

Following a similar rationale as commit e4835f1da425f ("kunit: tool: Build compile_commands.json"), make a common developer tool available by default for KUnit users. Compared to compile_commands.json, there is a little more work to be done to build the GDB scripts. Is it enough to affect development cycle duration? Unscientific evaluation: rm -rf .kunit; time tools/testing/kunit/kunit.py build --kunitconfig ./lib/kunit/.kunitconfig --jobs 96 Without this patch it took 14.77s, with this patch it took 14.83. So, although `make scripts_gdb` is pretty slow, presumably most of that is just the overhead of running Kbuild at all, actually building the scripts is approximately free. Note also, to actually get the GDB scripts the user needs to enable CONFIG_SCRIPTS_GDB, but building the scripts_gdb target without that is still harmless. Signed-off-by: Brendan Jackman <jackmanb(a)google.com> --- tools/testing/kunit/kunit_kernel.py | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/kunit/kunit_kernel.py b/tools/testing/kunit/kunit_kernel.py index e76d7894b6c5195ece49f0d8c7ac35130df428a9..33b5f7351cbb5d0be240cb52db2bc1fa94aeb75e 100644 --- a/tools/testing/kunit/kunit_kernel.py +++ b/tools/testing/kunit/kunit_kernel.py @@ -72,8 +72,8 @@ class LinuxSourceTreeOperations: raise ConfigError(e.output.decode()) def make(self, jobs: int, build_dir: str, make_options: Optional[List[str]]) -> None: - command = ['make', 'all', 'compile_commands.json', 'ARCH=' + self._linux_arch, - 'O=' + build_dir, '--jobs=' + str(jobs)] + command = ['make', 'all', 'compile_commands.json', 'scripts_gdb', + 'ARCH=' + self._linux_arch, 'O=' + build_dir, '--jobs=' + str(jobs)] if make_options: command.extend(make_options) if self._cross_compile: --- base-commit: 521d60e196ecb215f425e04e9ab33e02beaffbe3 change-id: 20250121-kunit-gdb-b27315b4f2d8 Best regards, -- Brendan Jackman <jackmanb(a)google.com>

2 months, 3 weeks

2
1
0 0

[PATCH] tools/nolibc: add support for N64 and N32 ABIs

by Thomas Weißschuh

Add support for the MIPS 64bit N64 and ILP32 N32 ABIs. In addition to different byte orders and ABIs there are also different releases of the MIPS architecture. To avoid blowing up the test matrix, only add a subset of all possible test combinations. Signed-off-by: Thomas Weißschuh <linux(a)weissschuh.net> --- tools/include/nolibc/arch-mips.h | 119 ++++++++++++++++++++++++---- tools/testing/selftests/nolibc/Makefile | 28 ++++++- tools/testing/selftests/nolibc/run-tests.sh | 2 +- 3 files changed, 131 insertions(+), 18 deletions(-) diff --git a/tools/include/nolibc/arch-mips.h b/tools/include/nolibc/arch-mips.h index 753a8ed2cf695f0b5eac4b5e4d317fdb383ebf93..638520a3427a985fdbd5f5a49b55853bbadeee75 100644 --- a/tools/include/nolibc/arch-mips.h +++ b/tools/include/nolibc/arch-mips.h @@ -10,7 +10,7 @@ #include "compiler.h" #include "crt.h" -#if !defined(_ABIO32) +#if !defined(_ABIO32) && !defined(_ABIN32) && !defined(_ABI64) #error Unsupported MIPS ABI #endif @@ -32,11 +32,32 @@ * - the arguments are cast to long and assigned into the target registers * which are then simply passed as registers to the asm code, so that we * don't have to experience issues with register constraints. + * + * Syscalls for MIPS ABI N32, same as ABI O32 with the following differences : + * - arguments are in a0, a1, a2, a3, t0, t1, t2, t3. + * t0..t3 are also known as a4..a7. + * - stack is 16-byte aligned */ +#if defined(_ABIO32) + #define _NOLIBC_SYSCALL_CLOBBERLIST \ "memory", "cc", "at", "v1", "hi", "lo", \ "t0", "t1", "t2", "t3", "t4", "t5", "t6", "t7", "t8", "t9" +#define _NOLIBC_SYSCALL_STACK_RESERVE "addiu $sp, $sp, -32\n" +#define _NOLIBC_SYSCALL_STACK_UNRESERVE "addiu $sp, $sp, 32\n" + +#elif defined(_ABIN32) || defined(_ABI64) + +/* binutils, GCC and clang disagree about register aliases, use numbers instead. */ +#define _NOLIBC_SYSCALL_CLOBBERLIST \ + "memory", "cc", "at", "v1", \ + "10", "11", "12", "13", "14", "15", "24", "25" + +#define _NOLIBC_SYSCALL_STACK_RESERVE +#define _NOLIBC_SYSCALL_STACK_UNRESERVE + +#endif #define my_syscall0(num) \ ({ \ @@ -44,9 +65,9 @@ register long _arg4 __asm__ ("a3"); \ \ __asm__ volatile ( \ - "addiu $sp, $sp, -32\n" \ + _NOLIBC_SYSCALL_STACK_RESERVE \ "syscall\n" \ - "addiu $sp, $sp, 32\n" \ + _NOLIBC_SYSCALL_STACK_UNRESERVE \ : "=r"(_num), "=r"(_arg4) \ : "r"(_num) \ : _NOLIBC_SYSCALL_CLOBBERLIST \ @@ -61,9 +82,9 @@ register long _arg4 __asm__ ("a3"); \ \ __asm__ volatile ( \ - "addiu $sp, $sp, -32\n" \ + _NOLIBC_SYSCALL_STACK_RESERVE \ "syscall\n" \ - "addiu $sp, $sp, 32\n" \ + _NOLIBC_SYSCALL_STACK_UNRESERVE \ : "=r"(_num), "=r"(_arg4) \ : "0"(_num), \ "r"(_arg1) \ @@ -80,9 +101,9 @@ register long _arg4 __asm__ ("a3"); \ \ __asm__ volatile ( \ - "addiu $sp, $sp, -32\n" \ + _NOLIBC_SYSCALL_STACK_RESERVE \ "syscall\n" \ - "addiu $sp, $sp, 32\n" \ + _NOLIBC_SYSCALL_STACK_UNRESERVE \ : "=r"(_num), "=r"(_arg4) \ : "0"(_num), \ "r"(_arg1), "r"(_arg2) \ @@ -100,9 +121,9 @@ register long _arg4 __asm__ ("a3"); \ \ __asm__ volatile ( \ - "addiu $sp, $sp, -32\n" \ + _NOLIBC_SYSCALL_STACK_RESERVE \ "syscall\n" \ - "addiu $sp, $sp, 32\n" \ + _NOLIBC_SYSCALL_STACK_UNRESERVE \ : "=r"(_num), "=r"(_arg4) \ : "0"(_num), \ "r"(_arg1), "r"(_arg2), "r"(_arg3) \ @@ -120,9 +141,9 @@ register long _arg4 __asm__ ("a3") = (long)(arg4); \ \ __asm__ volatile ( \ - "addiu $sp, $sp, -32\n" \ + _NOLIBC_SYSCALL_STACK_RESERVE \ "syscall\n" \ - "addiu $sp, $sp, 32\n" \ + _NOLIBC_SYSCALL_STACK_UNRESERVE \ : "=r" (_num), "=r"(_arg4) \ : "0"(_num), \ "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4) \ @@ -131,6 +152,8 @@ _arg4 ? -_num : _num; \ }) +#if defined(_ABIO32) + #define my_syscall5(num, arg1, arg2, arg3, arg4, arg5) \ ({ \ register long _num __asm__ ("v0") = (num); \ @@ -141,10 +164,10 @@ register long _arg5 = (long)(arg5); \ \ __asm__ volatile ( \ - "addiu $sp, $sp, -32\n" \ + _NOLIBC_SYSCALL_STACK_RESERVE \ "sw %7, 16($sp)\n" \ "syscall\n" \ - "addiu $sp, $sp, 32\n" \ + _NOLIBC_SYSCALL_STACK_UNRESERVE \ : "=r" (_num), "=r"(_arg4) \ : "0"(_num), \ "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5) \ @@ -164,11 +187,11 @@ register long _arg6 = (long)(arg6); \ \ __asm__ volatile ( \ - "addiu $sp, $sp, -32\n" \ + _NOLIBC_SYSCALL_STACK_RESERVE \ "sw %7, 16($sp)\n" \ "sw %8, 20($sp)\n" \ "syscall\n" \ - "addiu $sp, $sp, 32\n" \ + _NOLIBC_SYSCALL_STACK_UNRESERVE \ : "=r" (_num), "=r"(_arg4) \ : "0"(_num), \ "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5), \ @@ -178,6 +201,50 @@ _arg4 ? -_num : _num; \ }) +#else + +#define my_syscall5(num, arg1, arg2, arg3, arg4, arg5) \ +({ \ + register long _num __asm__ ("v0") = (num); \ + register long _arg1 __asm__ ("$4") = (long)(arg1); \ + register long _arg2 __asm__ ("$5") = (long)(arg2); \ + register long _arg3 __asm__ ("$6") = (long)(arg3); \ + register long _arg4 __asm__ ("$7") = (long)(arg4); \ + register long _arg5 __asm__ ("$8") = (long)(arg5); \ + \ + __asm__ volatile ( \ + "syscall\n" \ + : "=r" (_num), "=r"(_arg4) \ + : "0"(_num), \ + "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5) \ + : _NOLIBC_SYSCALL_CLOBBERLIST \ + ); \ + _arg4 ? -_num : _num; \ +}) + +#define my_syscall6(num, arg1, arg2, arg3, arg4, arg5, arg6) \ +({ \ + register long _num __asm__ ("v0") = (num); \ + register long _arg1 __asm__ ("$4") = (long)(arg1); \ + register long _arg2 __asm__ ("$5") = (long)(arg2); \ + register long _arg3 __asm__ ("$6") = (long)(arg3); \ + register long _arg4 __asm__ ("$7") = (long)(arg4); \ + register long _arg5 __asm__ ("$8") = (long)(arg5); \ + register long _arg6 __asm__ ("$9") = (long)(arg6); \ + \ + __asm__ volatile ( \ + "syscall\n" \ + : "=r" (_num), "=r"(_arg4) \ + : "0"(_num), \ + "r"(_arg1), "r"(_arg2), "r"(_arg3), "r"(_arg4), "r"(_arg5), \ + "r"(_arg6) \ + : _NOLIBC_SYSCALL_CLOBBERLIST \ + ); \ + _arg4 ? -_num : _num; \ +}) + +#endif + /* startup code, note that it's called __start on MIPS */ void __start(void); void __attribute__((weak, noreturn)) __nolibc_entrypoint __no_stack_protector __start(void) @@ -190,13 +257,33 @@ void __attribute__((weak, noreturn)) __nolibc_entrypoint __no_stack_protector __ "1:\n" ".cpload $ra\n" "move $a0, $sp\n" /* save stack pointer to $a0, as arg1 of _start_c */ + +#if defined(_ABIO32) "addiu $sp, $sp, -4\n" /* space for .cprestore to store $gp */ ".cprestore 0\n" "li $t0, -8\n" "and $sp, $sp, $t0\n" /* $sp must be 8-byte aligned */ "addiu $sp, $sp, -16\n" /* the callee expects to save a0..a3 there */ - "lui $t9, %hi(_start_c)\n" /* ABI requires current function address in $t9 */ +#else + "daddiu $sp, $sp, -8\n" /* space for .cprestore to store $gp */ + ".cpsetup $ra, 0, 1b\n" + "li $t0, -16\n" + "and $sp, $sp, $t0\n" /* $sp must be 16-byte aligned */ +#endif + + /* ABI requires current function address in $t9 */ +#if defined(_ABIO32) || defined(_ABIN32) + "lui $t9, %hi(_start_c)\n" "ori $t9, %lo(_start_c)\n" +#else + "lui $t9, %highest(_start_c)\n" + "ori $t9, %higher(_start_c)\n" + "dsll $t9, 0x10\n" + "ori $t9, %hi(_start_c)\n" + "dsll $t9, 0x10\n" + "ori $t9, %lo(_start_c)\n" +#endif + "jalr $t9\n" /* transfer to c runtime */ " nop\n" /* delayed slot */ ".set pop\n" diff --git a/tools/testing/selftests/nolibc/Makefile b/tools/testing/selftests/nolibc/Makefile index 983985b7529b65b7ce4a00c28f3f915d83974eea..2dec6ab9596c974b6aac439685e17f5c10a76948 100644 --- a/tools/testing/selftests/nolibc/Makefile +++ b/tools/testing/selftests/nolibc/Makefile @@ -52,6 +52,10 @@ ARCH_ppc64 = powerpc ARCH_ppc64le = powerpc ARCH_mips32le = mips ARCH_mips32be = mips +ARCH_mipsn32le = mips +ARCH_mipsn32be = mips +ARCH_mips64le = mips +ARCH_mips64be = mips ARCH_riscv32 = riscv ARCH_riscv64 = riscv ARCH := $(or $(ARCH_$(XARCH)),$(XARCH)) @@ -64,6 +68,10 @@ IMAGE_arm64 = arch/arm64/boot/Image IMAGE_arm = arch/arm/boot/zImage IMAGE_mips32le = vmlinuz IMAGE_mips32be = vmlinuz +IMAGE_mipsn32le = vmlinuz +IMAGE_mipsn32be = vmlinuz +IMAGE_mips64le = vmlinuz +IMAGE_mips64be = vmlinuz IMAGE_ppc = vmlinux IMAGE_ppc64 = vmlinux IMAGE_ppc64le = arch/powerpc/boot/zImage @@ -83,6 +91,10 @@ DEFCONFIG_arm64 = defconfig DEFCONFIG_arm = multi_v7_defconfig DEFCONFIG_mips32le = malta_defconfig DEFCONFIG_mips32be = malta_defconfig generic/eb.config +DEFCONFIG_mipsn32le = malta_defconfig generic/64r2.config +DEFCONFIG_mipsn32be = malta_defconfig generic/64r6.config generic/eb.config +DEFCONFIG_mips64le = malta_defconfig generic/64r6.config +DEFCONFIG_mips64be = malta_defconfig generic/64r2.config generic/eb.config DEFCONFIG_ppc = pmac32_defconfig DEFCONFIG_ppc64 = powernv_be_defconfig DEFCONFIG_ppc64le = powernv_defconfig @@ -105,7 +117,11 @@ QEMU_ARCH_x86 = x86_64 QEMU_ARCH_arm64 = aarch64 QEMU_ARCH_arm = arm QEMU_ARCH_mips32le = mipsel # works with malta_defconfig -QEMU_ARCH_mips32be = mips +QEMU_ARCH_mips32be = mips +QEMU_ARCH_mipsn32le = mips64el +QEMU_ARCH_mipsn32be = mips64 +QEMU_ARCH_mips64le = mips64el +QEMU_ARCH_mips64be = mips64 QEMU_ARCH_ppc = ppc QEMU_ARCH_ppc64 = ppc64 QEMU_ARCH_ppc64le = ppc64 @@ -117,6 +133,8 @@ QEMU_ARCH_loongarch = loongarch64 QEMU_ARCH = $(QEMU_ARCH_$(XARCH)) QEMU_ARCH_USER_ppc64le = ppc64le +QEMU_ARCH_USER_mipsn32le = mipsn32el +QEMU_ARCH_USER_mipsn32be = mipsn32 QEMU_ARCH_USER = $(or $(QEMU_ARCH_USER_$(XARCH)),$(QEMU_ARCH_$(XARCH))) QEMU_BIOS_DIR = /usr/share/edk2/ @@ -134,6 +152,10 @@ QEMU_ARGS_arm64 = -M virt -cpu cortex-a53 -append "panic=-1 $(TEST:%=NOLIBC QEMU_ARGS_arm = -M virt -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_mips32le = -M malta -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_mips32be = -M malta -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_mipsn32le = -M malta -cpu 5KEc -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_mipsn32be = -M malta -cpu I6400 -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_mips64le = -M malta -cpu I6400 -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_mips64be = -M malta -cpu 5KEc -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_ppc = -M g3beige -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_ppc64 = -M powernv -append "console=hvc0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" QEMU_ARGS_ppc64le = -M powernv -append "console=hvc0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" @@ -161,6 +183,10 @@ CFLAGS_ppc64le = -m64 -mlittle-endian -mno-vsx $(call cc-option,-mabi=elfv2) CFLAGS_s390 = -m64 CFLAGS_mips32le = -EL -mabi=32 -fPIC CFLAGS_mips32be = -EB -mabi=32 +CFLAGS_mipsn32le = -EL -mabi=n32 -fPIC -march=mips64r2 +CFLAGS_mipsn32be = -EB -mabi=n32 -march=mips64r6 +CFLAGS_mips64le = -EL -mabi=64 -march=mips64r6 +CFLAGS_mips64be = -EB -mabi=64 -march=mips64r2 CFLAGS_STACKPROTECTOR ?= $(call cc-option,-mstack-protector-guard=global $(call cc-option,-fstack-protector-all)) CFLAGS ?= -Os -fno-ident -fno-asynchronous-unwind-tables -std=c89 -W -Wall -Wextra \ $(call cc-option,-fno-stack-protector) $(call cc-option,-Wmissing-prototypes) \ diff --git a/tools/testing/selftests/nolibc/run-tests.sh b/tools/testing/selftests/nolibc/run-tests.sh index 6db01115276888bc89f6ec5532153c37e55c83d3..f0f3890fb5fa8196cd33aa8681ed30b00d8f474e 100755 --- a/tools/testing/selftests/nolibc/run-tests.sh +++ b/tools/testing/selftests/nolibc/run-tests.sh @@ -20,7 +20,7 @@ llvm= all_archs=( i386 x86_64 arm64 arm - mips32le mips32be + mips32le mips32be mipsn32le mipsn32be mips64le mips64be ppc ppc64 ppc64le riscv32 riscv64 s390 --- base-commit: 16681bea9a80080765c98b545ad74c17de2d513c change-id: 20231105-nolibc-mips-n32-234901bd910d Best regards, -- Thomas Weißschuh <linux(a)weissschuh.net>

2 months, 3 weeks

3
6
0 0

[PATCH net-next v3] selftests: net: add support for testing SO_RCVMARK and SO_RCVPRIORITY

by Anna Emese Nyiri

Introduce tests to verify the correct functionality of the SO_RCVMARK and SO_RCVPRIORITY socket options. Key changes include: - so_rcv_listener.c: Implements a receiver application to test the correct behavior of the SO_RCVMARK and SO_RCVPRIORITY options. - test_so_rcv.sh: Provides a shell script to automate testing for these options. - Makefile: Integrates test_so_rcv.sh into the kernel selftests. v3: - Add the C part to TEST_GEN_FILES. - Ensure the test fails if no cmsg of type opt.name is received in so_rcv_listener.c - Rebased on net-next. v2: https://lore.kernel.org/netdev/20250210192216.37756-1-annaemesenyiri@gmail.… - Add the C part to TEST_GEN_PROGS and .gitignore. - Modify buffer space and add IPv6 testing option in so_rcv_listener.c. - Add IPv6 testing, remove unnecessary comment, add kselftest exit codes, run both binaries in a namespace, and add sleep in test_so_rcv.sh. The sleep was added to ensure that the listener process has enough time to start before the sender attempts to connect. - Rebased on net-next. v1: https://lore.kernel.org/netdev/20250129143601.16035-2-annaemesenyiri@gmail.… Suggested-by: Jakub Kicinski <kuba(a)kernel.org> Suggested-by: Ferenc Fejes <fejes(a)inf.elte.hu> Signed-off-by: Anna Emese Nyiri <annaemesenyiri(a)gmail.com> --- tools/testing/selftests/net/.gitignore | 1 + tools/testing/selftests/net/Makefile | 2 + tools/testing/selftests/net/so_rcv_listener.c | 168 ++++++++++++++++++ tools/testing/selftests/net/test_so_rcv.sh | 73 ++++++++ 4 files changed, 244 insertions(+) create mode 100644 tools/testing/selftests/net/so_rcv_listener.c create mode 100755 tools/testing/selftests/net/test_so_rcv.sh diff --git a/tools/testing/selftests/net/.gitignore b/tools/testing/selftests/net/.gitignore index 28a715a8ef2b..80dcae53ef55 100644 --- a/tools/testing/selftests/net/.gitignore +++ b/tools/testing/selftests/net/.gitignore @@ -42,6 +42,7 @@ socket so_incoming_cpu so_netns_cookie so_txtime +so_rcv_listener stress_reuseport_listen tap tcp_fastopen_backup_key diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile index b6271714504d..8d6116b80cf1 100644 --- a/tools/testing/selftests/net/Makefile +++ b/tools/testing/selftests/net/Makefile @@ -33,6 +33,7 @@ TEST_PROGS += gro.sh TEST_PROGS += gre_gso.sh TEST_PROGS += cmsg_so_mark.sh TEST_PROGS += cmsg_so_priority.sh +TEST_PROGS += test_so_rcv.sh TEST_PROGS += cmsg_time.sh cmsg_ipv6.sh TEST_PROGS += netns-name.sh TEST_PROGS += nl_netdev.py @@ -76,6 +77,7 @@ TEST_GEN_PROGS += reuseport_dualstack reuseaddr_conflict tls tun tap epoll_busy_ TEST_GEN_FILES += toeplitz TEST_GEN_FILES += cmsg_sender TEST_GEN_FILES += stress_reuseport_listen +TEST_GEN_FILES += so_rcv_listener TEST_PROGS += test_vxlan_vnifiltering.sh TEST_GEN_FILES += io_uring_zerocopy_tx TEST_PROGS += io_uring_zerocopy_tx.sh diff --git a/tools/testing/selftests/net/so_rcv_listener.c b/tools/testing/selftests/net/so_rcv_listener.c new file mode 100644 index 000000000000..4b0b14edce61 --- /dev/null +++ b/tools/testing/selftests/net/so_rcv_listener.c @@ -0,0 +1,168 @@ +// SPDX-License-Identifier: GPL-2.0 + +#include <errno.h> +#include <netdb.h> +#include <stdbool.h> +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include <unistd.h> +#include <linux/types.h> +#include <sys/socket.h> +#include <netinet/in.h> +#include <arpa/inet.h> + +#ifndef SO_RCVPRIORITY +#define SO_RCVPRIORITY 82 +#endif + +struct options { + __u32 val; + int name; + int rcvname; + const char *host; + const char *service; +} opt; + +static void __attribute__((noreturn)) usage(const char *bin) +{ + printf("Usage: %s [opts] <dst host> <dst port / service>\n", bin); + printf("Options:\n" + "\t\t-M val Test SO_RCVMARK\n" + "\t\t-P val Test SO_RCVPRIORITY\n" + ""); + exit(EXIT_FAILURE); +} + +static void parse_args(int argc, char *argv[]) +{ + int o; + + while ((o = getopt(argc, argv, "M:P:")) != -1) { + switch (o) { + case 'M': + opt.val = atoi(optarg); + opt.name = SO_MARK; + opt.rcvname = SO_RCVMARK; + break; + case 'P': + opt.val = atoi(optarg); + opt.name = SO_PRIORITY; + opt.rcvname = SO_RCVPRIORITY; + break; + default: + usage(argv[0]); + break; + } + } + + if (optind != argc - 2) + usage(argv[0]); + + opt.host = argv[optind]; + opt.service = argv[optind + 1]; +} + +int main(int argc, char *argv[]) +{ + int err = 0; + int recv_fd = -1; + int ret_value = 0; + __u32 recv_val; + struct cmsghdr *cmsg; + char cbuf[CMSG_SPACE(sizeof(__u32))]; + char recv_buf[CMSG_SPACE(sizeof(__u32))]; + struct iovec iov[1]; + struct msghdr msg; + struct sockaddr_in recv_addr4; + struct sockaddr_in6 recv_addr6; + + parse_args(argc, argv); + + int family = strchr(opt.host, ':') ? AF_INET6 : AF_INET; + + recv_fd = socket(family, SOCK_DGRAM, IPPROTO_UDP); + if (recv_fd < 0) { + perror("Can't open recv socket"); + ret_value = -errno; + goto cleanup; + } + + err = setsockopt(recv_fd, SOL_SOCKET, opt.rcvname, &opt.val, sizeof(opt.val)); + if (err < 0) { + perror("Recv setsockopt error"); + ret_value = -errno; + goto cleanup; + } + + if (family == AF_INET) { + memset(&recv_addr4, 0, sizeof(recv_addr4)); + recv_addr4.sin_family = family; + recv_addr4.sin_port = htons(atoi(opt.service)); + + if (inet_pton(family, opt.host, &recv_addr4.sin_addr) <= 0) { + perror("Invalid IPV4 address"); + ret_value = -errno; + goto cleanup; + } + + err = bind(recv_fd, (struct sockaddr *)&recv_addr4, sizeof(recv_addr4)); + } else { + memset(&recv_addr6, 0, sizeof(recv_addr6)); + recv_addr6.sin6_family = family; + recv_addr6.sin6_port = htons(atoi(opt.service)); + + if (inet_pton(family, opt.host, &recv_addr6.sin6_addr) <= 0) { + perror("Invalid IPV6 address"); + ret_value = -errno; + goto cleanup; + } + + err = bind(recv_fd, (struct sockaddr *)&recv_addr6, sizeof(recv_addr6)); + } + + if (err < 0) { + perror("Recv bind error"); + ret_value = -errno; + goto cleanup; + } + + iov[0].iov_base = recv_buf; + iov[0].iov_len = sizeof(recv_buf); + + memset(&msg, 0, sizeof(msg)); + msg.msg_iov = iov; + msg.msg_iovlen = 1; + msg.msg_control = cbuf; + msg.msg_controllen = sizeof(cbuf); + + err = recvmsg(recv_fd, &msg, 0); + if (err < 0) { + perror("Message receive error"); + ret_value = -errno; + goto cleanup; + } + + for (cmsg = CMSG_FIRSTHDR(&msg); cmsg != NULL; cmsg = CMSG_NXTHDR(&msg, cmsg)) { + if (cmsg->cmsg_level == SOL_SOCKET && cmsg->cmsg_type == opt.name) { + recv_val = *(__u32 *)CMSG_DATA(cmsg); + printf("Received value: %u\n", recv_val); + + if (recv_val != opt.val) { + fprintf(stderr, "Error: expected value: %u, got: %u\n", + opt.val, recv_val); + ret_value = -EINVAL; + } + goto cleanup; + } + } + + fprintf(stderr, "Error: No matching cmsg received\n"); + ret_value = -ENOMSG; + +cleanup: + if (recv_fd >= 0) + close(recv_fd); + + return ret_value; +} diff --git a/tools/testing/selftests/net/test_so_rcv.sh b/tools/testing/selftests/net/test_so_rcv.sh new file mode 100755 index 000000000000..d8aa4362879d --- /dev/null +++ b/tools/testing/selftests/net/test_so_rcv.sh @@ -0,0 +1,73 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 + +source lib.sh + +HOSTS=("127.0.0.1" "::1") +PORT=1234 +TOTAL_TESTS=0 +FAILED_TESTS=0 + +declare -A TESTS=( + ["SO_RCVPRIORITY"]="-P 2" + ["SO_RCVMARK"]="-M 3" +) + +check_result() { + ((TOTAL_TESTS++)) + if [ "$1" -ne 0 ]; then + ((FAILED_TESTS++)) + fi +} + +cleanup() +{ + cleanup_ns $NS +} + +trap cleanup EXIT + +setup_ns NS + +for HOST in "${HOSTS[@]}"; do + PROTOCOL="IPv4" + if [[ "$HOST" == "::1" ]]; then + PROTOCOL="IPv6" + fi + for test_name in "${!TESTS[@]}"; do + echo "Running $test_name test, $PROTOCOL" + arg=${TESTS[$test_name]} + + ip netns exec $NS ./so_rcv_listener $arg $HOST $PORT & + LISTENER_PID=$! + + sleep 0.5 + + if ! ip netns exec $NS ./cmsg_sender $arg $HOST $PORT; then + echo "Sender failed for $test_name, $PROTOCOL" + kill "$LISTENER_PID" 2>/dev/null + wait "$LISTENER_PID" + check_result 1 + continue + fi + + wait "$LISTENER_PID" + LISTENER_EXIT_CODE=$? + + if [ "$LISTENER_EXIT_CODE" -eq 0 ]; then + echo "Rcv test OK for $test_name, $PROTOCOL" + check_result 0 + else + echo "Rcv test FAILED for $test_name, $PROTOCOL" + check_result 1 + fi + done +done + +if [ "$FAILED_TESTS" -ne 0 ]; then + echo "FAIL - $FAILED_TESTS/$TOTAL_TESTS tests failed" + exit ${KSFT_FAIL} +else + echo "OK - All $TOTAL_TESTS tests passed" + exit ${KSFT_PASS} +fi -- 2.43.0

2 months, 3 weeks

4
3
0 0

[PATCH net-next v8 0/3] netdev-genl: Add an xsk attribute to queues

by Joe Damato

Greetings: Welcome to v8. Minor change, see changelog below. Re-tested on my mlx5 system both with and without CONFIG_XDP_SOCKETS enabled and both with and without NETIF set. This is an attempt to followup on something Jakub asked me about [1], adding an xsk attribute to queues and more clearly documenting which queues are linked to NAPIs... After the RFC [2], Jakub suggested creating an empty nest for queues which have a pool, so I've adjusted this version to work that way. The nest can be extended in the future to express attributes about XSK as needed. Queues which are not used for AF_XDP do not have the xsk attribute present. I've run the included test on: - my mlx5 machine (via NETIF=) - without setting NETIF And the test seems to pass in both cases. Thanks, Joe [1]: https://lore.kernel.org/netdev/20250113143109.60afa59a@kernel.org/ [2]: https://lore.kernel.org/netdev/20250129172431.65773-1-jdamato@fastly.com/ v8: - Update the Makefile in patch 3 to use TEST_GEN_FILES instead of TEST_GET_PROGS. - Fix a codespell complaint in xdp_helper.c. v7: https://lore.kernel.org/netdev/20250213192336.42156-1-jdamato@fastly.com/ - Added CONFIG_XDP_SOCKETS to selftests/driver/net/config as suggested by Stanislav. - Updated xdp_helper.c to return -1 for AF_XDP non-existence, but 1 for other failures. - Updated queues.py to mark test as skipped if AF_XDP does not exist. v6: https://lore.kernel.org/bpf/20250210193903.16235-1-jdamato@fastly.com/ - Added ifdefs for CONFIG_XDP_SOCKETS in patch 2 as Stanislav suggested. v5: https://lore.kernel.org/bpf/20250208041248.111118-1-jdamato@fastly.com/ - Removed unused ret variable from patch 2 as Simon suggested. v4: https://lore.kernel.org/lkml/20250207030916.32751-1-jdamato@fastly.com/ - Add patch 1, as suggested by Jakub, which adds an empty nest helper. - Use the helper in patch 2, which makes the code cleaner and prevents a possible bug. v3: https://lore.kernel.org/netdev/20250204191108.161046-1-jdamato@fastly.com/ - Change comment format in patch 2 to avoid kdoc warnings. No other changes. v2: https://lore.kernel.org/all/20250203185828.19334-1-jdamato@fastly.com/ - Switched from RFC to actual submission now that net-next is open - Adjusted patch 1 to include an empty nest as suggested by Jakub - Adjusted patch 2 to update the test based on changes to patch 1, and to incorporate some Python feedback from Jakub :) rfc: https://lore.kernel.org/netdev/20250129172431.65773-1-jdamato@fastly.com/ Joe Damato (3): netlink: Add nla_put_empty_nest helper netdev-genl: Add an XSK attribute to queues selftests: drv-net: Test queue xsk attribute Documentation/netlink/specs/netdev.yaml | 13 ++- include/net/netlink.h | 15 +++ include/uapi/linux/netdev.h | 6 ++ net/core/netdev-genl.c | 12 +++ tools/include/uapi/linux/netdev.h | 6 ++ .../testing/selftests/drivers/net/.gitignore | 2 + tools/testing/selftests/drivers/net/Makefile | 3 + tools/testing/selftests/drivers/net/config | 1 + tools/testing/selftests/drivers/net/queues.py | 42 +++++++- .../selftests/drivers/net/xdp_helper.c | 98 +++++++++++++++++++ 10 files changed, 194 insertions(+), 4 deletions(-) create mode 100644 tools/testing/selftests/drivers/net/.gitignore create mode 100644 tools/testing/selftests/drivers/net/xdp_helper.c base-commit: 7a7e0197133d18cfd9931e7d3a842d0f5730223f -- 2.43.0

2 months, 3 weeks

2
2
0 0

[PATCH 0/2] selftests/mm: Allow execution on systems without huge pages

by Mark Brown

Currently the mm selftests refuse to run if we don't have huge page support but there are plenty of tests that don't depend on this feature, relax this requirement to allow coverage on relevant systems (eg, most 32 bit arm ones). While doing this I noticed a bug with an existing check if we're running THP tests, the fix overlaps with the above change so is sent as part of a series. Signed-off-by: Mark Brown <broonie(a)kernel.org> --- Mark Brown (2): selftests/mm: Fix check for running THP tests selftests/mm: Allow tests to run with no huge pages support tools/testing/selftests/mm/run_vmtests.sh | 68 +++++++++++++++++++------------ 1 file changed, 43 insertions(+), 25 deletions(-) --- base-commit: a64dcfb451e254085a7daee5fe51bf22959d52d3 change-id: 20250211-kselftest-mm-no-hugepages-ee5917a170eb Best regards, -- Mark Brown <broonie(a)kernel.org>

2 months, 3 weeks

2
4
0 0

2025

2024

2023

2022

2021

2020

2019

2018

2017

Linux-kselftest-mirror February 2025